🚸 ProUI G-code preview, PID plot (#24282)

This commit is contained in:
Miguel Risco-Castillo 2022-06-06 00:01:06 -05:00 committed by Scott Lahteine
parent 679f4608ab
commit 85e8d1f9fa
10 changed files with 749 additions and 32 deletions

View File

@ -0,0 +1,208 @@
/**
* Base64 encoder/decoder for arduino repo
* Uses common web conventions - '+' for 62, '/' for 63, '=' for padding.
* Note that invalid base64 characters are interpreted as padding.
* Author: Densaugeo
* Maintainer: Densaugeo
* Version: 1.2.1.1
* Changed unsigned int to uint16_t for use in the professional Ender 3V2/S1 firmware
* Url: https://www.arduino.cc/reference/en/libraries/base64/
*/
#ifndef BASE64_H_INCLUDED
#define BASE64_H_INCLUDED
/* binary_to_base64:
* Description:
* Converts a single byte from a binary value to the corresponding base64 character
* Parameters:
* v - Byte to convert
* Returns:
* ascii code of base64 character. If byte is >= 64, then there is not corresponding base64 character
* and 255 is returned
*/
unsigned char binary_to_base64(unsigned char v);
/* base64_to_binary:
* Description:
* Converts a single byte from a base64 character to the corresponding binary value
* Parameters:
* c - Base64 character (as ascii code)
* Returns:
* 6-bit binary value
*/
unsigned char base64_to_binary(unsigned char c);
/* encode_base64_length:
* Description:
* Calculates length of base64 string needed for a given number of binary bytes
* Parameters:
* input_length - Amount of binary data in bytes
* Returns:
* Number of base64 characters needed to encode input_length bytes of binary data
*/
uint16_t encode_base64_length(uint16_t input_length);
/* decode_base64_length:
* Description:
* Calculates number of bytes of binary data in a base64 string
* Variant that does not use input_length no longer used within library, retained for API compatibility
* Parameters:
* input - Base64-encoded null-terminated string
* input_length (optional) - Number of bytes to read from input pointer
* Returns:
* Number of bytes of binary data in input
*/
uint16_t decode_base64_length(unsigned char input[]);
uint16_t decode_base64_length(unsigned char input[], uint16_t input_length);
/* encode_base64:
* Description:
* Converts an array of bytes to a base64 null-terminated string
* Parameters:
* input - Pointer to input data
* input_length - Number of bytes to read from input pointer
* output - Pointer to output string. Null terminator will be added automatically
* Returns:
* Length of encoded string in bytes (not including null terminator)
*/
uint16_t encode_base64(unsigned char input[], uint16_t input_length, unsigned char output[]);
/* decode_base64:
* Description:
* Converts a base64 null-terminated string to an array of bytes
* Parameters:
* input - Pointer to input string
* input_length (optional) - Number of bytes to read from input pointer
* output - Pointer to output array
* Returns:
* Number of bytes in the decoded binary
*/
uint16_t decode_base64(unsigned char input[], unsigned char output[]);
uint16_t decode_base64(unsigned char input[], uint16_t input_length, unsigned char output[]);
unsigned char binary_to_base64(unsigned char v) {
// Capital letters - 'A' is ascii 65 and base64 0
if (v < 26) return v + 'A';
// Lowercase letters - 'a' is ascii 97 and base64 26
if (v < 52) return v + 71;
// Digits - '0' is ascii 48 and base64 52
if (v < 62) return v - 4;
// '+' is ascii 43 and base64 62
if (v == 62) return '+';
// '/' is ascii 47 and base64 63
if (v == 63) return '/';
return 64;
}
unsigned char base64_to_binary(unsigned char c) {
// Capital letters - 'A' is ascii 65 and base64 0
if ('A' <= c && c <= 'Z') return c - 'A';
// Lowercase letters - 'a' is ascii 97 and base64 26
if ('a' <= c && c <= 'z') return c - 71;
// Digits - '0' is ascii 48 and base64 52
if ('0' <= c && c <= '9') return c + 4;
// '+' is ascii 43 and base64 62
if (c == '+') return 62;
// '/' is ascii 47 and base64 63
if (c == '/') return 63;
return 255;
}
uint16_t encode_base64_length(uint16_t input_length) {
return (input_length + 2)/3*4;
}
uint16_t decode_base64_length(unsigned char input[]) {
return decode_base64_length(input, -1);
}
uint16_t decode_base64_length(unsigned char input[], uint16_t input_length) {
unsigned char *start = input;
while (base64_to_binary(input[0]) < 64 && (unsigned char)(input - start) < input_length) {
++input;
}
input_length = input - start;
return input_length/4*3 + (input_length % 4 ? input_length % 4 - 1 : 0);
}
uint16_t encode_base64(unsigned char input[], uint16_t input_length, unsigned char output[]) {
uint16_t full_sets = input_length/3;
// While there are still full sets of 24 bits...
for (uint16_t i = 0; i < full_sets; ++i) {
output[0] = binary_to_base64( input[0] >> 2);
output[1] = binary_to_base64((input[0] & 0x03) << 4 | input[1] >> 4);
output[2] = binary_to_base64((input[1] & 0x0F) << 2 | input[2] >> 6);
output[3] = binary_to_base64( input[2] & 0x3F);
input += 3;
output += 4;
}
switch(input_length % 3) {
case 0:
output[0] = '\0';
break;
case 1:
output[0] = binary_to_base64( input[0] >> 2);
output[1] = binary_to_base64((input[0] & 0x03) << 4);
output[2] = '=';
output[3] = '=';
output[4] = '\0';
break;
case 2:
output[0] = binary_to_base64( input[0] >> 2);
output[1] = binary_to_base64((input[0] & 0x03) << 4 | input[1] >> 4);
output[2] = binary_to_base64((input[1] & 0x0F) << 2);
output[3] = '=';
output[4] = '\0';
break;
}
return encode_base64_length(input_length);
}
uint16_t decode_base64(unsigned char input[], unsigned char output[]) {
return decode_base64(input, -1, output);
}
uint16_t decode_base64(unsigned char input[], uint16_t input_length, unsigned char output[]) {
uint16_t output_length = decode_base64_length(input, input_length);
// While there are still full sets of 24 bits...
for (uint16_t i = 2; i < output_length; i += 3) {
output[0] = base64_to_binary(input[0]) << 2 | base64_to_binary(input[1]) >> 4;
output[1] = base64_to_binary(input[1]) << 4 | base64_to_binary(input[2]) >> 2;
output[2] = base64_to_binary(input[2]) << 6 | base64_to_binary(input[3]);
input += 4;
output += 3;
}
switch(output_length % 3) {
case 1:
output[0] = base64_to_binary(input[0]) << 2 | base64_to_binary(input[1]) >> 4;
break;
case 2:
output[0] = base64_to_binary(input[0]) << 2 | base64_to_binary(input[1]) >> 4;
output[1] = base64_to_binary(input[1]) << 4 | base64_to_binary(input[2]) >> 2;
break;
}
return output_length;
}
#endif // ifndef

View File

@ -129,6 +129,14 @@
#include "endstop_diag.h"
#endif
#if HAS_PIDPLOT
#include "plot.h"
#endif
#if HAS_GCODE_PREVIEW
#include "gcode_preview.h"
#endif
#if HAS_MESH
#include "meshviewer.h"
#endif
@ -705,13 +713,19 @@ void Draw_PrintDone() {
Title.ShowCaption(GET_TEXT_F(MSG_PRINT_DONE));
DWINUI::ClearMainArea();
DWIN_Print_Header(nullptr);
Draw_Print_ProgressBar();
Draw_Print_Labels();
DWINUI::Draw_Icon(ICON_PrintTime, 15, 173);
DWINUI::Draw_Icon(ICON_RemainTime, 150, 171);
Draw_Print_ProgressElapsed();
Draw_Print_ProgressRemain();
DWINUI::Draw_Button(BTN_Continue, 86, 273);
if (sdprint && TERN0(HAS_GCODE_PREVIEW, Preview_Valid())) {
DWIN_ICON_Show(0, 0, 1, 21, 100, 0x00);
DWINUI::Draw_Button(BTN_Continue, 86, 300);
}
else {
Draw_Print_ProgressBar();
Draw_Print_Labels();
DWINUI::Draw_Icon(ICON_PrintTime, 15, 173);
DWINUI::Draw_Icon(ICON_RemainTime, 150, 171);
Draw_Print_ProgressElapsed();
Draw_Print_ProgressRemain();
DWINUI::Draw_Button(BTN_Continue, 86, 273);
}
}
void Goto_PrintDone() {
@ -1409,6 +1423,9 @@ void EachMomentUpdate() {
#if HAS_ESDIAG
if (checkkey == ESDiagProcess) ESDiag.Update();
#endif
#if HAS_PIDPLOT
if (checkkey == PidProcess) Plot.Update((HMI_value.pidresult == PID_EXTR_START) ? thermalManager.wholeDegHotend(0) : thermalManager.wholeDegBed());
#endif
}
#if HAS_STATUS_MESSAGE_TIMEOUT
@ -1635,15 +1652,49 @@ void DWIN_LevelingDone() {
#endif
// PID process
#if HAS_PIDPLOT
void DWIN_Draw_PIDPopup() {
frame_rect_t gfrm = {40, 180, DWIN_WIDTH - 80, 120};
DWINUI::ClearMainArea();
Draw_Popup_Bkgd();
DWINUI::Draw_CenteredString(HMI_data.PopupTxt_Color, 100, GET_TEXT_F(MSG_PID_AUTOTUNE));
DWINUI::Draw_String(HMI_data.PopupTxt_Color, gfrm.x, gfrm.y - DWINUI::fontHeight() - 4, F("PID target: Celsius"));
switch (HMI_value.pidresult) {
case PID_EXTR_START:
DWINUI::Draw_CenteredString(HMI_data.PopupTxt_Color, 120, F("for Nozzle is running."));
Plot.Draw(gfrm, thermalManager.hotend_maxtemp[0], HMI_data.HotendPidT);
DWINUI::Draw_Int(HMI_data.PopupTxt_Color, 3, gfrm.x + 90, gfrm.y - DWINUI::fontHeight() - 4, HMI_data.HotendPidT);
break;
case PID_BED_START:
DWINUI::Draw_CenteredString(HMI_data.PopupTxt_Color, 120, F("for BED is running."));
Plot.Draw(gfrm, BED_MAXTEMP, HMI_data.BedPidT);
DWINUI::Draw_Int(HMI_data.PopupTxt_Color, 3, gfrm.x + 90, gfrm.y - DWINUI::fontHeight() - 4, HMI_data.BedPidT);
break;
default:
break;
}
}
#endif
void DWIN_PidTuning(pidresult_t result) {
HMI_value.pidresult = result;
switch (result) {
case PID_BED_START:
HMI_SaveProcessID(NothingToDo);
DWIN_Draw_Popup(ICON_TempTooHigh, GET_TEXT_F(MSG_PID_AUTOTUNE), F("for BED is running."));
HMI_SaveProcessID(PidProcess);
#if HAS_PIDPLOT
DWIN_Draw_PIDPopup();
#else
DWIN_Draw_Popup(ICON_TempTooHigh, GET_TEXT_F(MSG_PID_AUTOTUNE), F("for BED is running."));
#endif
break;
case PID_EXTR_START:
HMI_SaveProcessID(NothingToDo);
DWIN_Draw_Popup(ICON_TempTooHigh, GET_TEXT_F(MSG_PID_AUTOTUNE), F("for Nozzle is running."));
HMI_SaveProcessID(PidProcess);
#if HAS_PIDPLOT
DWIN_Draw_PIDPopup();
#else
DWIN_Draw_Popup(ICON_TempTooHigh, GET_TEXT_F(MSG_PID_AUTOTUNE), F("for Nozzle is running."));
#endif
break;
case PID_BAD_EXTRUDER_NUM:
checkkey = last_checkkey;
@ -1960,10 +2011,30 @@ void HMI_LockScreen() {
}
void Goto_ConfirmToPrint() {
card.openAndPrintFile(card.filename);
DWIN_Print_Started(true);
}
#if HAS_GCODE_PREVIEW
void onClick_ConfirmToPrint() {
if (HMI_flag.select_flag) { // Confirm
card.openAndPrintFile(card.filename);
return DWIN_Print_Started(true);
}
else { // Cancel
DWIN_ResetStatusLine();
checkkey = SelectFile;
return Draw_Print_File_Menu();
}
}
void Goto_ConfirmToPrint() {
Goto_Popup(Preview_DrawFromSD, onClick_ConfirmToPrint);
}
#else
void Goto_ConfirmToPrint() {
card.openAndPrintFile(card.filename);
DWIN_Print_Started(true);
}
#endif
#if HAS_ESDIAG
void Draw_EndStopDiag() {

View File

@ -35,6 +35,8 @@
#include <stddef.h>
#define HAS_ESDIAG 1
#define HAS_PIDPLOT 1
#define HAS_GCODE_PREVIEW 1
#if defined(__STM32F1__) || defined(STM32F1)
#define DASH_REDRAW 1
#endif

View File

@ -0,0 +1,253 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2022 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
/**
* DWIN g-code thumbnail preview
* Author: Miguel A. Risco-Castillo
* version: 2.1
* Date: 2021/06/19
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU Lesser General Public License as
* published by the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
* For commercial applications additional licenses can be requested
*/
#include "dwin_defines.h"
#if HAS_GCODE_PREVIEW
#include "../../../core/types.h"
#include "../../marlinui.h"
#include "../../../sd/cardreader.h"
#include "dwin_lcd.h"
#include "dwinui.h"
#include "dwin.h"
#include "dwin_popup.h"
#include "base64.hpp"
#include "gcode_preview.h"
typedef struct {
char name[13] = ""; //8.3 + null
uint32_t thumbstart = 0;
int thumbsize = 0;
int thumbheight = 0;
int thumbwidth = 0;
uint8_t *thumbdata = nullptr;
float time = 0;
float filament = 0;
float layer = 0;
float width = 0;
float height = 0;
float length = 0;
void setname(const char * const fn);
void clear();
} fileprop_t;
fileprop_t fileprop;
void fileprop_t::setname(const char * const fn) {
const uint8_t len = _MIN(sizeof(name) - 1, strlen(fn));
memcpy(&name[0], fn, len);
name[len] = '\0';
}
void fileprop_t::clear() {
fileprop.name[0] = '\0';
fileprop.thumbstart = 0;
fileprop.thumbsize = 0;
fileprop.thumbheight = 0;
fileprop.thumbwidth = 0;
fileprop.thumbdata = nullptr;
fileprop.time = 0;
fileprop.filament = 0;
fileprop.layer = 0;
fileprop.height = 0;
fileprop.width = 0;
fileprop.length = 0;
}
void Get_Value(char *buf, const char * const key, float &value) {
char num[10] = "";
char * posptr = 0;
uint8_t i = 0;
if (!!value) return;
posptr = strstr(buf, key);
if (posptr != nullptr) {
while (i < sizeof(num)) {
char c = posptr[0];
if (!ISEOL(c) && (c != 0)) {
if ((c > 47 && c < 58) || (c == '.')) num[i++] = c;
posptr++;
}
else {
num[i] = '\0';
value = atof(num);
return;
}
}
}
}
bool Has_Preview() {
const char * tbstart = "; thumbnail begin 230x180";
char * posptr = 0;
uint8_t nbyte = 1;
uint32_t indx = 0;
char buf[256];
float tmp = 0;
fileprop.clear();
fileprop.setname(card.filename);
card.openFileRead(fileprop.name);
while ((nbyte > 0) && (indx < 4 * sizeof(buf)) && !fileprop.thumbstart) {
nbyte = card.read(buf, sizeof(buf) - 1);
if (nbyte > 0) {
buf[nbyte] = '\0';
Get_Value(buf, ";TIME:", fileprop.time);
Get_Value(buf, ";Filament used:", fileprop.filament);
Get_Value(buf, ";Layer height:", fileprop.layer);
Get_Value(buf, ";MINX:", tmp);
Get_Value(buf, ";MAXX:", fileprop.width);
fileprop.width -= tmp;
tmp = 0;
Get_Value(buf, ";MINY:", tmp);
Get_Value(buf, ";MAXY:", fileprop.length);
fileprop.length -= tmp;
tmp = 0;
Get_Value(buf, ";MINZ:", tmp);
Get_Value(buf, ";MAXZ:", fileprop.height);
fileprop.height -= tmp;
posptr = strstr(buf, tbstart);
if (posptr != NULL) {
fileprop.thumbstart = indx + (posptr - &buf[0]);
}
else {
indx += _MAX(10, nbyte - (signed)strlen(tbstart));
card.setIndex(indx);
}
}
}
if (!fileprop.thumbstart) {
card.closefile();
LCD_MESSAGE_F("Thumbnail not found");
return 0;
}
// Get the size of the thumbnail
card.setIndex(fileprop.thumbstart + strlen(tbstart));
for (uint8_t i = 0; i < 16; i++) {
char c = card.get();
if (!ISEOL(c)) {
buf[i] = c;
}
else {
buf[i] = 0;
break;
}
}
fileprop.thumbsize = atoi(buf);
// Exit if there isn't a thumbnail
if (!fileprop.thumbsize) {
card.closefile();
LCD_MESSAGE_F("Invalid Thumbnail Size");
return 0;
}
uint16_t readed = 0;
uint8_t buf64[fileprop.thumbsize];
fileprop.thumbdata = new uint8_t[3 + 3 * (fileprop.thumbsize / 4)]; // Reserve space for the JPEG thumbnail
while (readed < fileprop.thumbsize) {
uint8_t c = card.get();
if (!ISEOL(c) && (c != ';') && (c != ' ')) {
buf64[readed] = c;
readed++;
}
}
card.closefile();
buf64[readed] = 0;
fileprop.thumbsize = decode_base64(buf64, fileprop.thumbdata); card.closefile();
DWINUI::WriteToSRAM(0x00, fileprop.thumbsize, fileprop.thumbdata);
delete[] fileprop.thumbdata;
return true;
}
void Preview_DrawFromSD() {
if (Has_Preview()) {
char buf[46];
char str_1[6] = "";
char str_2[6] = "";
char str_3[6] = "";
DWIN_Draw_Rectangle(1, HMI_data.Background_Color, 0, 0, DWIN_WIDTH, STATUS_Y - 1);
if (fileprop.time) {
sprintf_P(buf, PSTR("Estimated time: %i:%02i"), (uint16_t)fileprop.time / 3600, ((uint16_t)fileprop.time % 3600) / 60);
DWINUI::Draw_String(20, 10, buf);
}
if (fileprop.filament) {
sprintf_P(buf, PSTR("Filament used: %s m"), dtostrf(fileprop.filament, 1, 2, str_1));
DWINUI::Draw_String(20, 30, buf);
}
if (fileprop.layer) {
sprintf_P(buf, PSTR("Layer height: %s mm"), dtostrf(fileprop.layer, 1, 2, str_1));
DWINUI::Draw_String(20, 50, buf);
}
if (fileprop.width) {
sprintf_P(buf, PSTR("Volume: %sx%sx%s mm"), dtostrf(fileprop.width, 1, 1, str_1), dtostrf(fileprop.length, 1, 1, str_2), dtostrf(fileprop.height, 1, 1, str_3));
DWINUI::Draw_String(20, 70, buf);
}
DWINUI::Draw_Button(BTN_Print, 26, 290);
DWINUI::Draw_Button(BTN_Cancel, 146, 290);
DWIN_ICON_Show(0, 0, 1, 21, 90, 0x00);
Draw_Select_Highlight(true, 290);
DWIN_UpdateLCD();
}
else {
HMI_flag.select_flag = 1;
wait_for_user = false;
}
}
bool Preview_Valid() {
return !!fileprop.thumbstart;
}
void Preview_Reset() {
fileprop.thumbsize = 0;
}
#endif // HAS_GCODE_PREVIEW

View File

@ -0,0 +1,27 @@
/**
* DWIN g-code thumbnail preview
* Author: Miguel A. Risco-Castillo
* version: 2.1
* Date: 2021/06/19
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU Lesser General Public License as
* published by the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
* For commercial applications additional licenses can be requested
*/
#pragma once
void Preview_DrawFromSD();
bool Preview_Valid();
void Preview_Reset();

View File

@ -0,0 +1,94 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2022 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
/**
* DWIN Single var plot
* Author: Miguel A. Risco-Castillo
* Version: 2.0
* Date: 2022/01/31
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU Lesser General Public License as
* published by the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
* For commercial applications additional licenses can be requested
*/
#include "../../../inc/MarlinConfigPre.h"
#ifdef DWIN_LCD_PROUI
#include "plot.h"
#include "../../../core/types.h"
#include "../../marlinui.h"
#include "dwin_lcd.h"
#include "dwinui.h"
#include "dwin_popup.h"
#include "dwin.h"
#define Plot_Bg_Color RGB( 1, 12, 8)
PlotClass Plot;
uint16_t grphpoints, r, x2, y2 = 0;
frame_rect_t grphframe = {0};
float scale = 0;
void PlotClass::Draw(const frame_rect_t frame, const float max, const float ref) {
grphframe = frame;
grphpoints = 0;
scale = frame.h / max;
x2 = frame.x + frame.w - 1;
y2 = frame.y + frame.h - 1;
r = round((y2) - ref * scale);
DWINUI::Draw_Box(1, Plot_Bg_Color, frame);
for (uint8_t i = 1; i < 4; i++) if (i*50 < frame.w) DWIN_Draw_VLine(Line_Color, i*50 + frame.x, frame.y, frame.h);
DWINUI::Draw_Box(0, Color_White, DWINUI::ExtendFrame(frame, 1));
DWIN_Draw_HLine(Color_Red, frame.x, r, frame.w);
}
void PlotClass::Update(const float value) {
if (!scale) return;
uint16_t y = round((y2) - value * scale);
if (grphpoints < grphframe.w) {
DWIN_Draw_Point(Color_Yellow, 1, 1, grphpoints + grphframe.x, y);
}
else {
DWIN_Frame_AreaMove(1, 0, 1, Plot_Bg_Color, grphframe.x, grphframe.y, x2, y2);
if ((grphpoints % 50) == 0) DWIN_Draw_VLine(Line_Color, x2 - 1, grphframe.y + 1, grphframe.h - 2);
DWIN_Draw_Point(Color_Red, 1, 1, x2 - 1, r);
DWIN_Draw_Point(Color_Yellow, 1, 1, x2 - 1, y);
}
grphpoints++;
}
#endif // DWIN_LCD_PROUI

View File

@ -0,0 +1,54 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2022 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
/**
* DWIN Single var plot
* Author: Miguel A. Risco-Castillo
* Version: 1.0
* Date: 2022/01/30
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU Lesser General Public License as
* published by the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
* For commercial applications additional licenses can be requested
*/
#pragma once
#include "dwinui.h"
class PlotClass {
public:
void Draw(frame_rect_t frame, float max, float ref = 0);
void Update(float value);
};
extern PlotClass Plot;

View File

@ -1,10 +1,9 @@
/**
* UBL Tools and Mesh Viewer for Pro UI
* Version: 1.0.0
* Date: 2022/04/13
* Marlin 3D Printer Firmware
* Copyright (c) 2022 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Original Author: Henri-J-Norden
* Original Source: https://github.com/Jyers/Marlin/pull/126
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@ -21,6 +20,15 @@
*
*/
/**
* UBL Tools and Mesh Viewer for Pro UI
* Version: 1.0.0
* Date: 2022/04/13
*
* Original Author: Henri-J-Norden
* Original Source: https://github.com/Jyers/Marlin/pull/126
*/
#include "../../../inc/MarlinConfigPre.h"
#if BOTH(DWIN_LCD_PROUI, AUTO_BED_LEVELING_UBL)

View File

@ -18,9 +18,14 @@ opt_disable DWIN_CREALITY_LCD
opt_enable DWIN_CREALITY_LCD_JYERSUI AUTO_BED_LEVELING_BILINEAR PROBE_MANUALLY
exec_test $1 $2 "Ender 3 v2 with JyersUI" "$3"
use_example_configs "Creality/Ender-3 V2/CrealityV422/MarlinUI"
opt_add SDCARD_EEPROM_EMULATION AUTO_BED_LEVELING_BILINEAR Z_SAFE_HOMING
exec_test $1 $2 "Ender 3 v2 with MarlinUI" "$3"
use_example_configs "Creality/Ender-3 S1"
opt_disable DWIN_CREALITY_LCD Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN AUTO_BED_LEVELING_BILINEAR CONFIGURATION_EMBEDDING CANCEL_OBJECTS FWRETRACT
opt_enable DWIN_LCD_PROUI INDIVIDUAL_AXIS_HOMING_SUBMENU LCD_SET_PROGRESS_MANUALLY STATUS_MESSAGE_SCROLLING \
SOUND_MENU_ITEM PRINTCOUNTER NOZZLE_PARK_FEATURE ADVANCED_PAUSE_FEATURE FILAMENT_RUNOUT_SENSOR \
BLTOUCH Z_SAFE_HOMING AUTO_BED_LEVELING_UBL MESH_EDIT_MENU \
LIMITED_MAX_FR_EDITING LIMITED_MAX_ACCEL_EDITING LIMITED_JERK_EDITING BAUD_RATE_GCODE
opt_set PREHEAT_3_LABEL '"CUSTOM"' PREHEAT_3_TEMP_HOTEND 240 PREHEAT_3_TEMP_BED 60 PREHEAT_3_FAN_SPEED 128
exec_test $1 $2 "Ender-3 S1 with ProUI" "$3"
restore_configs
opt_set MOTHERBOARD BOARD_CREALITY_V452 SERIAL_PORT 1

View File

@ -6,15 +6,10 @@
# exit on first failure
set -e
use_example_configs "Creality/Ender-3 S1"
opt_disable DWIN_CREALITY_LCD Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN AUTO_BED_LEVELING_BILINEAR CONFIGURATION_EMBEDDING CANCEL_OBJECTS FWRETRACT
opt_enable DWIN_LCD_PROUI INDIVIDUAL_AXIS_HOMING_SUBMENU LCD_SET_PROGRESS_MANUALLY STATUS_MESSAGE_SCROLLING \
SOUND_MENU_ITEM PRINTCOUNTER NOZZLE_PARK_FEATURE ADVANCED_PAUSE_FEATURE FILAMENT_RUNOUT_SENSOR \
BLTOUCH Z_SAFE_HOMING AUTO_BED_LEVELING_UBL MESH_EDIT_MENU \
LIMITED_MAX_FR_EDITING LIMITED_MAX_ACCEL_EDITING LIMITED_JERK_EDITING BAUD_RATE_GCODE
opt_set MOTHERBOARD BOARD_CREALITY_V24S1_301F4 \
PREHEAT_3_LABEL '"CUSTOM"' PREHEAT_3_TEMP_HOTEND 240 PREHEAT_3_TEMP_BED 60 PREHEAT_3_FAN_SPEED 128
exec_test $1 $2 "Ender-3 S1 with ProUI" "$3"
use_example_configs "Creality/Ender-3 V2/CrealityV422/MarlinUI"
opt_add SDCARD_EEPROM_EMULATION AUTO_BED_LEVELING_BILINEAR Z_SAFE_HOMING
opt_set MOTHERBOARD BOARD_CREALITY_V24S1_301F4
exec_test $1 $2 "Ender 3 v2 with MarlinUI" "$3"
# clean up
restore_configs