MPCNC/Firmware2
1
0
Fork 0
Code Issues 1 Pull Requests Releases Wiki Activity

📌 Pins updates for Longer LK5, etc. (#25012)

Browse Source 
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
This commit is contained in:
ellensp 2022-12-11 04:00:51 +13:00 committed by Scott Lahteine
parent 0efeedf262
commit 86a3362bf6
15 changed files with 196 additions and 188 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Marlin/src/pins/pins_postprocess.h
View File

@ -715,6 +715,8 @@
#undef FIL_RUNOUT2_PIN
#endif
#undef LCD_PINS_DEFINED
#ifndef LCD_PINS_D4
#define LCD_PINS_D4 -1
#endif

27
Marlin/src/pins/ramps/pins_3DRAG.h
View File

@ -66,6 +66,8 @@
#define MOSFET_C_PIN 9
#define MOSFET_D_PIN 12
#define HEATER_2_PIN 6
//
// Misc. Functions
//
@ -122,16 +124,6 @@
#endif
#endif
#include "pins_RAMPS.h"
//
// Heaters / Fans
//
#define HEATER_2_PIN 6
#undef SD_DETECT_PIN
#define SD_DETECT_PIN 53
//
// LCD / Controller
//
@ -139,12 +131,6 @@
#undef BEEPER_PIN
// TODO: Remap EXP1/2 based on adapter
#undef LCD_PINS_RS
#undef LCD_PINS_ENABLE
#undef LCD_PINS_D4
#undef LCD_PINS_D5
#undef LCD_PINS_D6
#undef LCD_PINS_D7
#define LCD_PINS_RS 27
#define LCD_PINS_ENABLE 29
#define LCD_PINS_D4 37
@ -153,13 +139,12 @@
#define LCD_PINS_D7 31
// Buttons
#undef BTN_EN1
#undef BTN_EN2
#undef BTN_ENC
#define BTN_EN1 16
#define BTN_EN2 17
#define BTN_ENC 23
#define LCD_PINS_DEFINED
#else
#define BEEPER_PIN 33
@ -171,3 +156,7 @@
#define BOARD_ST7920_DELAY_2 188
#define BOARD_ST7920_DELAY_3 0
#endif
#define SD_DETECT_PIN 53
#include "pins_RAMPS.h"

31
Marlin/src/pins/ramps/pins_K8600.h
View File

@ -37,8 +37,7 @@
//
#define X_MIN_PIN 3
#define Y_MAX_PIN 14
#define Z_MAX_PIN 18
#define Z_MIN_PIN -1
#define Z_STOP_PIN 18
//
// Steppers
@ -48,6 +47,7 @@
//
// Heaters / Fans
//
#define HEATER_BED_PIN -1
#define FAN_PIN 8
//
@ -56,28 +56,11 @@
#define SDSS 25
#define CASE_LIGHT_PIN 7
//
// Other RAMPS pins
//
#include "pins_RAMPS.h"
//
// Heaters / Fans
//
#undef HEATER_BED_PIN
//
// LCD / Controller
//
#if HAS_WIRED_LCD && IS_NEWPANEL
#undef BEEPER_PIN
#undef LCD_PINS_RS
#undef LCD_PINS_ENABLE
#undef LCD_PINS_D4
#undef LCD_PINS_D5
#undef LCD_PINS_D6
#undef LCD_PINS_D7
#define LCD_PINS_RS 27
#define LCD_PINS_ENABLE 29
#define LCD_PINS_D4 37
@ -86,15 +69,19 @@
#define LCD_PINS_D7 31
// Buttons
#undef BTN_EN1
#undef BTN_EN2
#undef BTN_ENC
#define BTN_EN1 17
#define BTN_EN2 16
#define BTN_ENC 23
#define LCD_PINS_DEFINED
#else
#define BEEPER_PIN 33
#endif
//
// Other RAMPS pins
//
#include "pins_RAMPS.h"

82
Marlin/src/pins/ramps/pins_LONGER3D_LKx_PRO.h
View File

@ -33,25 +33,30 @@
#endif
#if SERIAL_PORT == 1 || SERIAL_PORT_2 == 1 || SERIAL_PORT_3 == 1
#warning "Serial 1 is originally reserved to DGUS LCD."
#warning "Serial 1 is originally reserved for DGUS LCD."
#endif
#if SERIAL_PORT == 2 || SERIAL_PORT_2 == 2 || SERIAL_PORT_3 == 2 || LCD_SERIAL_PORT == 2
#warning "Serial 2 has no connector. Hardware changes may be required to use it."
#endif
#if SERIAL_PORT == 3 || SERIAL_PORT_2 == 3 || SERIAL_PORT_3 == 3 || LCD_SERIAL_PORT == 3
#define CHANGE_Y_LIMIT_PINS
#warning "Serial 3 is originally reserved to Y limit switches. Hardware changes are required to use it."
#warning "Serial 3 is originally reserved for Y limit switches. Hardware changes are required to use it."
#define Y_STOP_PIN 37
#if MB(LONGER3D_LKx_PRO)
#define Z_STOP_PIN 35
#endif
#endif
// Custom flags and defines for the build
//#define BOARD_CUSTOM_BUILD_FLAGS -D__FOO__
#define BOARD_INFO_NAME "LGT KIT V1.0"
#if ENABLED(LONGER_LK5)
#define DEFAULT_MACHINE_NAME "LONGER LK5"
#else
#define DEFAULT_MACHINE_NAME "LONGER 3D Printer"
#endif
//
// Servos
//
#if !MB(LONGER3D_LK1_PRO)
#if MB(LONGER3D_LKx_PRO)
#define SERVO0_PIN 7
#endif
#define SERVO1_PIN -1
@ -61,28 +66,35 @@
//
// Limit Switches
//
#if ENABLED(LONGER_LK5)
#define X_MIN_PIN 3
#define X_MAX_PIN 2
#else
#define X_STOP_PIN 3
#endif
#ifdef CHANGE_Y_LIMIT_PINS
#define Y_STOP_PIN 37
#if !ANY_PIN(Y_MIN, Y_MAX, Y_STOP)
#if ENABLED(LONGER_LK5)
#define Y_STOP_PIN 14
#else
#define Y_MIN_PIN 14
#define Y_MAX_PIN 15
#endif
#if !MB(LONGER3D_LK1_PRO)
#ifdef CHANGE_Y_LIMIT_PINS
#define Z_STOP_PIN 35
#else
#define Z_MIN_PIN 35
#define Z_MAX_PIN 37
#endif
#if !ANY_PIN(Z_MIN, Z_MAX, Z_STOP)
#if MB(LONGER3D_LKx_PRO)
#define Z_MIN_PIN 35
#else
#define Z_MIN_PIN 11
#endif
#define Z_MAX_PIN 37
#endif
#undef CHANGE_Y_LIMIT_PINS
//
// Z Probe (when not Z_MIN_PIN)
//
#define Z_MIN_PROBE_PIN -1
//
// Steppers - No E1 pins
@ -92,11 +104,6 @@
#define E1_ENABLE_PIN -1
#define E1_CS_PIN -1
//
// Z Probe (when not Z_MIN_PIN)
//
#define Z_MIN_PROBE_PIN -1
//
// Temperature Sensors
//
@ -115,7 +122,36 @@
#define SD_DETECT_PIN 49
#define FIL_RUNOUT_PIN 2
// ------------------ ---------------- --------------- -------------
// Aux-1 | D19 D18 GND 5V | J21 | D4 D5 D6 GND | J17 | D11 GND 24V | J18 | D7 GND 5V |
// ------------------ ---------------- --------------- -------------
#if BOTH(CR10_STOCKDISPLAY, LONGER_LK5)
/** CR-10 Stock Display
* ------
* GND | 9 10 | 5V
* LCD_PINS_RS D5 | 7 8 | D4 LCD_PINS_ENABLE
* BTN_EN2 D19 | 5 6 D6 LCD_PINS_D4
* BTN_EN1 D18 | 3 4 | GND
* BEEPER_PIN D11 | 1 2 | D15 BTN_ENC
* ------
* Connected via provided custom cable to:
* Aux-1, J21, J17 and Y-Max.
*/
#define LCD_PINS_RS 5
#define LCD_PINS_ENABLE 4
#define LCD_PINS_D4 6
#define BTN_EN1 18
#define BTN_EN2 19
#define BTN_ENC 15
#define BEEPER_PIN 11
#define SDCARD_CONNECTION ONBOARD
#define LCD_PINS_DEFINED
#endif
//
// Other RAMPS 1.3 pins
//
#include "pins_RAMPS_13.h" // ... RAMPS
#include "pins_RAMPS_13.h" // ... pins_RAMPS.h

16
Marlin/src/pins/ramps/pins_ORTUR_4.h
View File

@ -75,31 +75,25 @@
#define E0_SERIAL_RX_PIN 65
#endif
#include "pins_RAMPS.h"
//
// LCD / Controller
//
#if IS_RRD_FG_SC
#undef BEEPER_PIN
#define BEEPER_PIN 35
#undef LCD_PINS_RS
#undef LCD_PINS_ENABLE
#undef LCD_PINS_D4
#define LCD_PINS_RS 27
#define LCD_PINS_ENABLE 23
#define LCD_PINS_D4 37
#undef LCD_SDSS
#undef SD_DETECT_PIN
#define LCD_SDSS 53
#define SD_DETECT_PIN 49
#undef BTN_EN1
#undef BTN_EN2
#undef BTN_ENC
#define BTN_EN1 29
#define BTN_EN2 25
#define BTN_ENC 16
#define LCD_PINS_DEFINED
#endif
#include "pins_RAMPS.h"

20
Marlin/src/pins/ramps/pins_RAMPS.h
View File

@ -585,7 +585,7 @@
// LCDs and Controllers //
//////////////////////////
#if HAS_WIRED_LCD
#if HAS_WIRED_LCD && DISABLED(LCD_PINS_DEFINED)
//#define LCD_SCREEN_ROTATE 180 // 0, 90, 180, 270
@ -715,7 +715,9 @@
#define BTN_EN1 AUX2_05_PIN
#define BTN_EN2 AUX2_03_PIN
#define BTN_ENC AUX2_04_PIN
#ifndef SD_DETECT_PIN
#define SD_DETECT_PIN AUX2_08_PIN
#endif
#elif ENABLED(LCD_I2C_PANELOLU2)
@ -732,7 +734,9 @@
#define BTN_ENC -1
#define LCD_SDSS SDSS
#ifndef SD_DETECT_PIN
#define SD_DETECT_PIN EXP2_07_PIN
#endif
#elif EITHER(VIKI2, miniVIKI)
@ -748,7 +752,9 @@
#define BTN_EN2 7
#define BTN_ENC AUX4_08_PIN
#ifndef SD_DETECT_PIN
#define SD_DETECT_PIN -1 // Pin 49 for display SD interface, 72 for easy adapter board
#endif
#define KILL_PIN EXP2_03_PIN
#elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)
@ -764,7 +770,9 @@
#define BTN_ENC EXP2_03_PIN
#define LCD_SDSS SDSS
#ifndef SD_DETECT_PIN
#define SD_DETECT_PIN EXP2_07_PIN
#endif
#define KILL_PIN EXP2_08_PIN
#elif EITHER(MKS_MINI_12864, FYSETC_MINI_12864)
@ -833,7 +841,9 @@
#define BTN_EN2 AUX2_04_PIN
#define BTN_ENC AUX2_03_PIN
#ifndef SD_DETECT_PIN
#define SD_DETECT_PIN AUX3_02_PIN
#endif
#define KILL_PIN AUX2_05_PIN
#elif ENABLED(ZONESTAR_LCD)
@ -848,7 +858,9 @@
#define BEEPER_PIN EXP1_01_PIN
#ifndef SD_DETECT_PIN
#define SD_DETECT_PIN EXP2_07_PIN
#endif
#define KILL_PIN EXP2_08_PIN
#define BTN_EN1 EXP2_05_PIN
@ -857,7 +869,9 @@
#elif IS_TFTGLCD_PANEL
#ifndef SD_DETECT_PIN
#define SD_DETECT_PIN EXP2_07_PIN
#endif
#else
@ -876,7 +890,7 @@
#endif
#endif // IS_NEWPANEL
#endif // HAS_WIRED_LCD
#endif // HAS_WIRED_LCD && !LCD_PINS_DEFINED
#if IS_RRW_KEYPAD && !HAS_ADC_BUTTONS
#define SHIFT_OUT_PIN AUX2_06_PIN
@ -933,7 +947,9 @@
#define BEEPER_PIN EXP1_01_PIN
#ifndef SD_DETECT_PIN
#define SD_DETECT_PIN EXP2_07_PIN
#endif
#define CLCD_MOD_RESET EXP2_05_PIN
#define CLCD_SPI_CS EXP2_03_PIN

28
Marlin/src/pins/ramps/pins_ZRIB_V20.h
View File

@ -26,7 +26,9 @@
* V2 and V3 Boards only differ in USB controller, nothing affecting the pins.
*/
#include "pins_MKS_GEN_13.h" // ... RAMPS
#ifndef FILWIDTH_PIN
#define FILWIDTH_PIN 11 // Analog Input
#endif
//
// Auto fans
@ -44,27 +46,7 @@
#define E3_AUTO_FAN_PIN 6
#endif
#ifndef FILWIDTH_PIN
#define FILWIDTH_PIN 11 // Analog Input
#endif
#if ENABLED(ZONESTAR_LCD)
#undef LCD_PINS_RS
#undef LCD_PINS_ENABLE
#undef LCD_PINS_D4
#undef LCD_PINS_D5
#undef LCD_PINS_D6
#undef LCD_PINS_D7
#undef ADC_KEYPAD_PIN
#undef BEEPER_PIN
#undef SHIFT_OUT_PIN
#undef SHIFT_CLK_PIN
#undef SHIFT_LD_PIN
#undef BTN_EN1
#undef BTN_EN2
#undef BTN_ENC
#define LCD_PINS_RS 16
#define LCD_PINS_ENABLE 17
#define LCD_PINS_D4 23
@ -73,4 +55,8 @@
#define LCD_PINS_D7 29
#define ADC_KEYPAD_PIN 10 // Analog Input
#define BEEPER_PIN 37
#define LCD_PINS_DEFINED
#endif
#include "pins_MKS_GEN_13.h" // ... RAMPS

2
Marlin/src/pins/sanguino/pins_AZTEEG_X1.h
View File

@ -27,4 +27,6 @@
#define BOARD_INFO_NAME "Azteeg X1"
#define FAN_PIN 4
#include "pins_SANGUINOLOLU_12.h" // ... SANGUINOLOLU_11

4
Marlin/src/pins/sanguino/pins_MELZI.h
View File

@ -29,7 +29,9 @@
#define BOARD_INFO_NAME "Melzi"
#endif
#define IS_MELZI 1
#ifndef FAN_PIN
#define FAN_PIN 4
#endif
// Alter timing for graphical display
#if IS_U8GLIB_ST7920

17
Marlin/src/pins/sanguino/pins_MELZI_CREALITY.h
View File

@ -42,25 +42,20 @@
#define BOARD_ST7920_DELAY_3 125
#endif
#include "pins_MELZI.h" // ... SANGUINOLOLU_12 ... SANGUINOLOLU_11
//
// For the stock CR-10 enable CR10_STOCKDISPLAY in Configuration.h
//
#undef LCD_SDSS
#undef LED_PIN
#undef LCD_PINS_RS
#undef LCD_PINS_ENABLE
#undef LCD_PINS_D4
#undef LCD_PINS_D5
#undef LCD_PINS_D6
#undef LCD_PINS_D7
#if ENABLED(CR10_STOCKDISPLAY)
#define LCD_SDSS 31 // Smart Controller SD card reader (rather than the Melzi)
#define LCD_PINS_RS 28 // ST9720 CS
#define LCD_PINS_ENABLE 17 // ST9720 DAT
#define LCD_PINS_D4 30 // ST9720 CLK
#define LCD_PINS_DEFINED
#endif
#include "pins_MELZI.h" // ... SANGUINOLOLU_12 ... SANGUINOLOLU_11
#if ENABLED(BLTOUCH)
#ifndef SERVO0_PIN
#define SERVO0_PIN 27

16
Marlin/src/pins/sanguino/pins_MELZI_MALYAN.h
View File

@ -27,19 +27,15 @@
#define BOARD_INFO_NAME "Melzi (Malyan)"
#include "pins_MELZI.h" // ... SANGUINOLOLU_12 ... SANGUINOLOLU_11
#undef LCD_SDSS
#undef LCD_PINS_RS
#undef LCD_PINS_ENABLE
#undef LCD_PINS_D4
#undef BTN_EN1
#undef BTN_EN2
#undef BTN_ENC
#if ENABLED(CR10_STOCKDISPLAY)
#define LCD_PINS_RS 17 // ST9720 CS
#define LCD_PINS_ENABLE 16 // ST9720 DAT
#define LCD_PINS_D4 11 // ST9720 CLK
#define BTN_EN1 30
#define BTN_EN2 29
#define BTN_ENC 28
#define LCD_PINS_DEFINED
#endif
#include "pins_MELZI.h" // ... SANGUINOLOLU_12 ... SANGUINOLOLU_11

37
Marlin/src/pins/sanguino/pins_MELZI_TRONXY.h
View File

@ -27,28 +27,11 @@
#define BOARD_INFO_NAME "Melzi (Tronxy)"
// Alter timing for graphical display
#if IS_U8GLIB_ST7920
#define BOARD_ST7920_DELAY_1 0
#define BOARD_ST7920_DELAY_2 125
#define BOARD_ST7920_DELAY_3 0
#endif
#include "pins_MELZI.h" // ... SANGUINOLOLU_12 ... SANGUINOLOLU_11
#undef Z_ENABLE_PIN
#undef LCD_PINS_RS
#undef LCD_PINS_ENABLE
#undef LCD_PINS_D4
#undef LCD_PINS_D5
#undef LCD_PINS_D6
#undef LCD_PINS_D7
#undef BTN_EN1
#undef BTN_EN2
#undef BTN_ENC
#undef LCD_SDSS
#define Z_ENABLE_PIN 14
#define LCD_SDSS -1
#if ENABLED(CR10_STOCKDISPLAY)
#define LCD_PINS_RS 30
#define LCD_PINS_ENABLE 28
#define LCD_PINS_D4 16
@ -58,3 +41,15 @@
#define BTN_EN1 10
#define BTN_EN2 11
#define BTN_ENC 26
#define LCD_PINS_DEFINED
#endif
// Alter timing for graphical display
#if IS_U8GLIB_ST7920
#define BOARD_ST7920_DELAY_1 0
#define BOARD_ST7920_DELAY_2 125
#define BOARD_ST7920_DELAY_3 0
#endif
#include "pins_MELZI.h" // ... SANGUINOLOLU_12 ... SANGUINOLOLU_11

28
Marlin/src/pins/sanguino/pins_SANGUINOLOLU_11.h
View File

@ -90,30 +90,18 @@
//
#define HEATER_0_PIN 13 // (extruder)
#if ENABLED(SANGUINOLOLU_V_1_2)
#define HEATER_BED_PIN 12 // (bed)
#define X_ENABLE_PIN 14
#define Y_ENABLE_PIN 14
#define Z_ENABLE_PIN 26
#define E0_ENABLE_PIN 14
#if !defined(FAN_PIN) && ENABLED(LCD_I2C_PANELOLU2)
#define FAN_PIN 4 // Uses Transistor1 (PWM) on Panelolu2's Sanguino Adapter Board to drive the fan
#ifndef FAN_PIN
#define FAN_PIN 4 // Works for Panelolu2 too
#endif
#else
#if DISABLED(SANGUINOLOLU_V_1_2)
#define HEATER_BED_PIN 14 // (bed)
#define X_ENABLE_PIN 4
#define Y_ENABLE_PIN 4
#ifndef Z_ENABLE_PIN
#define Z_ENABLE_PIN 4
#define E0_ENABLE_PIN 4
#endif
#if !defined(FAN_PIN) && (MB(AZTEEG_X1, STB_11) || IS_MELZI)
#define FAN_PIN 4 // Works for Panelolu2 too
#define E0_ENABLE_PIN 4
#endif
//
@ -151,7 +139,7 @@
//
// LCD / Controller
//
#if HAS_WIRED_LCD
#if HAS_WIRED_LCD && DISABLED(LCD_PINS_DEFINED)
#define SD_DETECT_PIN -1
@ -245,7 +233,9 @@
#if IS_MELZI
#define BTN_ENC 29
#ifndef LCD_SDSS
#define LCD_SDSS 30 // Panelolu2 SD card reader rather than the Melzi
#endif
#else
#define BTN_ENC 30
#endif
@ -253,7 +243,9 @@
#else // !LCD_FOR_MELZI && !ZONESTAR_LCD && !LCD_I2C_PANELOLU2
#define BTN_ENC 16
#ifndef LCD_SDSS
#define LCD_SDSS 28 // Smart Controller SD card reader rather than the Melzi
#endif
#endif

12
Marlin/src/pins/sanguino/pins_SANGUINOLOLU_12.h
View File

@ -38,5 +38,17 @@
#define BOARD_INFO_NAME "Sanguinololu 1.2"
#endif
#define HEATER_BED_PIN 12 // (bed)
#define X_ENABLE_PIN 14
#define Y_ENABLE_PIN 14
#ifndef Z_ENABLE_PIN
#define Z_ENABLE_PIN 26
#endif
#define E0_ENABLE_PIN 14
#if !defined(FAN_PIN) && ENABLED(LCD_I2C_PANELOLU2)
#define FAN_PIN 4 // Uses Transistor1 (PWM) on Panelolu2's Sanguino Adapter Board to drive the fan
#endif
#define SANGUINOLOLU_V_1_2
#include "pins_SANGUINOLOLU_11.h"

4
Marlin/src/pins/sanguino/pins_STB_11.h
View File

@ -27,4 +27,8 @@
#define BOARD_INFO_NAME "STB V1.1"
#ifndef FAN_PIN
#define FAN_PIN 4 // Works for Panelolu2 too
#endif
#include "pins_SANGUINOLOLU_12.h" // ... SANGUINOLOLU_11