From 86bf911139b0b3280809f3070bac7157803663ae Mon Sep 17 00:00:00 2001 From: Nicolas Rossi Date: Tue, 5 Mar 2013 14:52:51 +0100 Subject: [PATCH] Toggle menu for PSU from LCD pannel From the prepare menu, accessible when is not printing, you have the possibility to turn off the PSU when is on et vice versa. From the host, you can turn off or turn on the PSU then the menu is updated accordingly. From the LCD message, the printer status is reported ready or off respectively when the PSU is on or off. --- Marlin/Marlin_main.cpp | 34 ++++++++++++++++++++++++---------- Marlin/language.h | 18 ++++++++++++++++++ Marlin/ultralcd.cpp | 7 +++++++ 3 files changed, 49 insertions(+), 10 deletions(-) diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp index 39efdf4545..7c715d8373 100644 --- a/Marlin/Marlin_main.cpp +++ b/Marlin/Marlin_main.cpp @@ -124,7 +124,7 @@ // M500 - stores paramters in EEPROM // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. -// M503 - print the current settings (from memory not from eeprom) +// M503 - print the current settings (from memory not from eeprom) // M540 - Use S[0|1] to enable or disable the stop SD card print on endstop hit (requires ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED) // M600 - Pause for filament change X[pos] Y[pos] Z[relative lift] E[initial retract] L[later retract distance for removal] // M907 - Set digital trimpot motor current using axis codes. @@ -165,6 +165,10 @@ int fanSpeed=0; float retract_recover_length=0, retract_recover_feedrate=8*60; #endif +#ifdef ULTIPANEL + bool powersupply = true; +#endif + //=========================================================================== //=============================private variables============================= //=========================================================================== @@ -1140,13 +1144,18 @@ void process_commands() #endif //FAN_PIN #if (PS_ON_PIN > -1) - case 80: // M80 - ATX Power On + case 80: // M80 - Turn on Power Supply SET_OUTPUT(PS_ON_PIN); //GND WRITE(PS_ON_PIN, PS_ON_AWAKE); + #ifdef ULTIPANEL + powersupply = true; + LCD_MESSAGEPGM(WELCOME_MSG); + lcd_update(); + #endif break; #endif - case 81: // M81 - ATX Power Off + case 81: // M81 - Turn off Power Supply #if defined SUICIDE_PIN && SUICIDE_PIN > -1 st_synchronize(); @@ -1154,6 +1163,11 @@ void process_commands() #elif (PS_ON_PIN > -1) SET_OUTPUT(PS_ON_PIN); WRITE(PS_ON_PIN, PS_ON_ASLEEP); + #endif + #ifdef ULTIPANEL + powersupply = false; + LCD_MESSAGEPGM(MACHINE_NAME" "MSG_OFF"."); + lcd_update(); #endif break; @@ -1499,13 +1513,13 @@ void process_commands() { Config_PrintSettings(); } - break; - #ifdef ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED - case 540: - { - if(code_seen('S')) abort_on_endstop_hit = code_value() > 0; - } - break; + break; + #ifdef ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED + case 540: + { + if(code_seen('S')) abort_on_endstop_hit = code_value() > 0; + } + break; #endif #ifdef FILAMENTCHANGEENABLE case 600: //Pause for filament change X[pos] Y[pos] Z[relative lift] E[initial retract] L[later retract distance for removal] diff --git a/Marlin/language.h b/Marlin/language.h index 5d4404d663..564d7b9a6a 100644 --- a/Marlin/language.h +++ b/Marlin/language.h @@ -50,6 +50,8 @@ #define MSG_PREHEAT_ABS "Preheat ABS" #define MSG_PREHEAT_ABS_SETTINGS "Preheat ABS Conf" #define MSG_COOLDOWN "Cooldown" + #define MSG_SWITCH_PS_ON "Switch Power On" + #define MSG_SWITCH_PS_OFF "Switch Power Off" #define MSG_EXTRUDE "Extrude" #define MSG_RETRACT "Retract" #define MSG_MOVE_AXIS "Move Axis" @@ -205,6 +207,8 @@ #define MSG_PREHEAT_ABS "Rozgrzej ABS" #define MSG_PREHEAT_ABS_SETTINGS "Ustawienia roz. ABS" #define MSG_COOLDOWN "Chlodzenie" + #define MSG_SWITCH_PS_ON "Switch Power On" + #define MSG_SWITCH_PS_OFF "Switch Power Off" #define MSG_EXTRUDE "Ekstruzja" #define MSG_RETRACT "Cofanie" #define MSG_MOVE_AXIS "Ruch osi" @@ -360,6 +364,8 @@ #define MSG_PREHEAT_ABS " Prechauffage ABS" #define MSG_PREHEAT_ABS_SETTINGS " Regl. prechauffe ABS" #define MSG_COOLDOWN " Refroidissement" +#define MSG_SWITCH_PS_ON "Allumer alimentation" +#define MSG_SWITCH_PS_OFF "Eteindre alimentation" #define MSG_EXTRUDE " Extrusion" #define MSG_RETRACT " Retractation" #define MSG_PREHEAT_PLA " Prechauffage PLA" @@ -523,6 +529,8 @@ #define MSG_PREHEAT_ABS "Vorwärmen ABS" #define MSG_PREHEAT_ABS_SETTINGS "Vorwärmen ABS Einstellungen" #define MSG_COOLDOWN "Abkühlen" + #define MSG_SWITCH_PS_ON "Switch Power On" + #define MSG_SWITCH_PS_OFF "Switch Power Off" #define MSG_EXTRUDE "Extrude" #define MSG_RETRACT "Retract" #define MSG_MOVE_AXIS "Achsen bewegen" @@ -675,6 +683,8 @@ #define MSG_AUTO_HOME " Llevar Ejes al Cero" #define MSG_SET_ORIGIN " Establecer Cero" #define MSG_COOLDOWN " Enfriar" +#define MSG_SWITCH_PS_ON "Switch Power On" +#define MSG_SWITCH_PS_OFF "Switch Power Off" #define MSG_EXTRUDE " Extruir" #define MSG_RETRACT " Retraer" #define MSG_PREHEAT_PLA " Precalentar PLA" @@ -835,6 +845,8 @@ #define MSG_PREHEAT_ABS " Преднагрев ABS " #define MSG_PREHEAT_ABS_SETTINGS " Настр. преднагр.ABS" #define MSG_COOLDOWN " Охлаждение " +#define MSG_SWITCH_PS_ON "Switch Power On" +#define MSG_SWITCH_PS_OFF "Switch Power Off" #define MSG_EXTRUDE " Экструзия " #define MSG_RETRACT " Откат" #define MSG_MOVE_AXIS " Движение по осям \x7E" @@ -986,6 +998,8 @@ #define MSG_PREHEAT_ABS "Preriscalda ABS" #define MSG_PREHEAT_ABS_SETTINGS "Preris. ABS Conf" #define MSG_COOLDOWN "Rafredda" + #define MSG_SWITCH_PS_ON "Switch Power On" + #define MSG_SWITCH_PS_OFF "Switch Power Off" #define MSG_EXTRUDE "Estrudi" #define MSG_RETRACT "Ritrai" #define MSG_MOVE_AXIS "Muovi Asse" @@ -1142,6 +1156,8 @@ #define MSG_PREHEAT_ABS " pre-aquecer ABS" #define MSG_PREHEAT_ABS_SETTINGS " pre-aquecer ABS Setting" #define MSG_COOLDOWN " Esfriar" + #define MSG_SWITCH_PS_ON "Switch Power On" + #define MSG_SWITCH_PS_OFF "Switch Power Off" #define MSG_EXTRUDE " Extrudar" #define MSG_RETRACT " Retrair" #define MSG_PREHEAT_PLA " pre-aquecer PLA" @@ -1308,6 +1324,8 @@ #define MSG_PREHEAT_ABS "Esilammita ABS" #define MSG_PREHEAT_ABS_SETTINGS "Esilammita ABS konf" #define MSG_COOLDOWN "Jaahdyta" + #define MSG_SWITCH_PS_ON "Switch Power On" + #define MSG_SWITCH_PS_OFF "Switch Power Off" #define MSG_EXTRUDE "Pursota" #define MSG_RETRACT "Veda takaisin" #define MSG_MOVE_AXIS "Liikuta akseleita" diff --git a/Marlin/ultralcd.cpp b/Marlin/ultralcd.cpp index db2d2766ca..e989bbfe44 100644 --- a/Marlin/ultralcd.cpp +++ b/Marlin/ultralcd.cpp @@ -30,6 +30,7 @@ char lcd_status_message[LCD_WIDTH+1] = WELCOME_MSG; /* Different menus */ static void lcd_status_screen(); #ifdef ULTIPANEL +extern bool powersupply; static void lcd_main_menu(); static void lcd_tune_menu(); static void lcd_prepare_menu(); @@ -278,6 +279,12 @@ static void lcd_prepare_menu() MENU_ITEM(function, MSG_PREHEAT_PLA, lcd_preheat_pla); MENU_ITEM(function, MSG_PREHEAT_ABS, lcd_preheat_abs); MENU_ITEM(gcode, MSG_COOLDOWN, PSTR("M104 S0\nM140 S0")); + if (powersupply) + { + MENU_ITEM(gcode, MSG_SWITCH_PS_OFF, PSTR("M81")); + }else{ + MENU_ITEM(gcode, MSG_SWITCH_PS_ON, PSTR("M80")); + } MENU_ITEM(submenu, MSG_MOVE_AXIS, lcd_move_menu); END_MENU(); }