From 8707ae23e22d40e7f818cf77e7ec89038fdaacf7 Mon Sep 17 00:00:00 2001 From: JoAnn Manges Date: Mon, 8 Feb 2021 20:51:57 -0500 Subject: [PATCH] MAX Thermocouples rework (#20447) Co-authored-by: Scott Lahteine --- Marlin/src/HAL/LPC1768/inc/SanityCheck.h | 2 +- Marlin/src/MarlinCore.cpp | 6 +- Marlin/src/inc/Conditionals_post.h | 84 +++++++ Marlin/src/module/temperature.cpp | 229 +++++++++++++++----- Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_3.h | 1 + 5 files changed, 266 insertions(+), 56 deletions(-) diff --git a/Marlin/src/HAL/LPC1768/inc/SanityCheck.h b/Marlin/src/HAL/LPC1768/inc/SanityCheck.h index be64ea832e..10d6737714 100644 --- a/Marlin/src/HAL/LPC1768/inc/SanityCheck.h +++ b/Marlin/src/HAL/LPC1768/inc/SanityCheck.h @@ -31,7 +31,7 @@ /** * Detect an old pins file by checking for old ADC pins values. */ -#define _OLD_TEMP_PIN(P) PIN_EXISTS(P) && _CAT(P,_PIN) <= 7 && _CAT(P,_PIN) != 2 && _CAT(P,_PIN) != 3 +#define _OLD_TEMP_PIN(P) PIN_EXISTS(P) && _CAT(P,_PIN) <= 7 && !WITHIN(_CAT(P,_PIN), TERN(LPC1768_IS_SKRV1_3, 0, 2), 3) // Include P0_00 and P0_01 for SKR V1.3 board #if _OLD_TEMP_PIN(TEMP_BED) #error "TEMP_BED_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)." #elif _OLD_TEMP_PIN(TEMP_0) diff --git a/Marlin/src/MarlinCore.cpp b/Marlin/src/MarlinCore.cpp index 6b2259dd08..b085e6145a 100644 --- a/Marlin/src/MarlinCore.cpp +++ b/Marlin/src/MarlinCore.cpp @@ -937,11 +937,11 @@ void setup() { SETUP_RUN(HAL_init()); - // Init and disable SPI thermocouples - #if TEMP_SENSOR_0_IS_MAX6675 + // Init and disable SPI thermocouples; this is still needed + #if TEMP_SENSOR_0_IS_MAX_TC OUT_WRITE(MAX6675_SS_PIN, HIGH); // Disable #endif - #if TEMP_SENSOR_1_IS_MAX6675 + #if TEMP_SENSOR_1_IS_MAX_TC OUT_WRITE(MAX6675_SS2_PIN, HIGH); // Disable #endif diff --git a/Marlin/src/inc/Conditionals_post.h b/Marlin/src/inc/Conditionals_post.h index 04c4eb120d..949885eab7 100644 --- a/Marlin/src/inc/Conditionals_post.h +++ b/Marlin/src/inc/Conditionals_post.h @@ -490,6 +490,90 @@ #define HAS_MAX6675 1 #endif +// +// Compatibility layer for MAX (SPI) temp boards +// +#if PIN_EXISTS(MAX6675_SS) + #if TEMP_SENSOR_0_IS_MAX31855 + #define MAX31855_CS_PIN MAX6675_SS_PIN + #elif TEMP_SENSOR_0_IS_MAX31865 + #define MAX31865_CS_PIN MAX6675_SS_PIN + #elif TEMP_SENSOR_0_IS_MAX6675 + #define MAX6675_CS_PIN MAX6675_SS_PIN + #endif +#endif + +#if PIN_EXISTS(MAX6675_SS2) + #if TEMP_SENSOR_1_IS_MAX31855 + #define MAX31855_CS2_PIN MAX6675_SS2_PIN + #elif TEMP_SENSOR_1_IS_MAX31865 + #define MAX31865_CS2_PIN MAX6675_SS2_PIN + #elif TEMP_SENSOR_1_IS_MAX6675 + #define MAX6675_CS2_PIN MAX6675_SS2_PIN + #endif +#endif + +#if PIN_EXISTS(MAX6675_DO) + #if HAS_MAX31855 + #define MAX31855_MISO_PIN MAX6675_DO_PIN + #elif HAS_MAX31865 + #define MAX31865_MISO_PIN MAX6675_DO_PIN + #elif HAS_MAX6675 + #define MAX6675_MISO_PIN MAX6675_DO_PIN + #endif +#endif + +#if PIN_EXISTS(MAX6675_SCK) + #if HAS_MAX31855 + #define MAX31855_SCK_PIN MAX6675_SCK_PIN + #elif HAS_MAX31865 + #define MAX31865_SCK_PIN MAX6675_SCK_PIN + #endif +#endif + +// Compatibility Layer for use when HAL manipulates PINS for MAX31855 and MAX6675 +#if PIN_EXISTS(MAX31855_CS) && !PIN_EXISTS(MAX6675_SS) + #define MAX6675_SS_PIN MAX31855_CS_PIN +#endif +#if PIN_EXISTS(MAX31855_CS2) && !PIN_EXISTS(MAX6675_SS2) + #define MAX6675_SS2_PIN MAX31855_CS2_PIN +#endif +#if PIN_EXISTS(MAX6675_CS) && !PIN_EXISTS(MAX6675_SS) + #define MAX6675_SS_PIN MAX6675_CS_PIN +#endif +#if PIN_EXISTS(MAX6675_CS2) && !PIN_EXISTS(MAX6675_SS2) + #define MAX6675_SS2_PIN MAX6675_CS2_PIN +#endif +#if PIN_EXISTS(MAX31855_MISO) && !PIN_EXISTS(MAX6675_DO) + #define MAX6675_DO_PIN MAX31855_MISO_PIN +#endif +#if PIN_EXISTS(MAX6675_MISO) && !PIN_EXISTS(MAX6675_DO) + #define MAX6675_DO_PIN MAX6675_MISO_PIN +#endif +#if PIN_EXISTS(MAX31855_SCK) && !PIN_EXISTS(MAX6675_SCK) + #define MAX6675_SCK_PIN MAX31855_SCK_PIN +#endif + +// +// User-defined thermocouple libraries +// +// Add LIB_MAX6675 / LIB_MAX31855 / LIB_MAX31865 to the build_flags +// to select a USER library for MAX6675, MAX31855, MAX31865 +// +#if BOTH(HAS_MAX6675, LIB_MAX6675) + #define LIB_USR_MAX6675 1 +#endif +#if BOTH(HAS_MAX31855, LIB_MAX31855) + #define LIB_USR_MAX31855 1 +#endif +#if HAS_MAX31865 + #if ENABLED(LIB_MAX31865) + #define LIB_USR_MAX31865 1 + #else + #define LIB_ADAFRUIT_MAX31865 1 + #endif +#endif + #if TEMP_SENSOR_2 == -4 #define TEMP_SENSOR_2_IS_AD8495 1 #elif TEMP_SENSOR_2 == -3 diff --git a/Marlin/src/module/temperature.cpp b/Marlin/src/module/temperature.cpp index 5a4ed16744..edd76df3b7 100644 --- a/Marlin/src/module/temperature.cpp +++ b/Marlin/src/module/temperature.cpp @@ -47,41 +47,104 @@ #include "../lcd/extui/ui_api.h" #endif +// LIB_MAX31855 can be added to the build_flags in platformio.ini to use a user-defined library +#if LIB_USR_MAX31855 + #include + #if PIN_EXISTS(MAX31855_MISO) && PIN_EXISTS(MAX31855_SCK) + #define MAX31855_USES_SW_SPI 1 + #endif + #if TEMP_SENSOR_0_IS_MAX31855 && PIN_EXISTS(MAX31855_CS) + #define HAS_MAX31855_TEMP 1 + Adafruit_MAX31855 max31855_0 = Adafruit_MAX31855(MAX31855_CS_PIN + #if MAX31855_USES_SW_SPI + , MAX31855_MISO_PIN, MAX31855_SCK_PIN // For software SPI also set MISO/SCK + #endif + #if ENABLED(LARGE_PINMAP) + , HIGH + #endif + ); + #endif + #if TEMP_SENSOR_1_IS_MAX31855 && PIN_EXISTS(MAX31855_CS2) + #define HAS_MAX31855_TEMP 1 + Adafruit_MAX31855 max31855_1 = Adafruit_MAX31855(MAX31855_CS2_PIN + #if MAX31855_USES_SW_SPI + , MAX31855_MISO_PIN, MAX31855_SCK_PIN // For software SPI also set MISO/SCK + #endif + #if ENABLED(LARGE_PINMAP) + , HIGH + #endif + ); + #endif +#endif + +// LIB_MAX31865 can be added to the build_flags in platformio.ini to use a user-defined library. +// If LIB_MAX31865 is not on the build_flags then the Adafruit MAX31865 V1.1.0 library is used. #if HAS_MAX31865 #include - #if TEMP_SENSOR_0_IS_MAX31865 && !defined(MAX31865_CS_PIN) && PIN_EXISTS(MAX6675_SS) - #define MAX31865_CS_PIN MAX6675_SS_PIN - #endif - #if TEMP_SENSOR_1_IS_MAX31865 && !defined(MAX31865_CS2_PIN) && PIN_EXISTS(MAX6675_SS2) - #define MAX31865_CS2_PIN MAX6675_SS2_PIN - #endif #ifndef MAX31865_MOSI_PIN #define MAX31865_MOSI_PIN SD_MOSI_PIN #endif - #ifndef MAX31865_MISO_PIN - #define MAX31865_MISO_PIN MAX6675_DO_PIN - #endif - #ifndef MAX31865_SCK_PIN - #define MAX31865_SCK_PIN MAX6675_SCK_PIN + #if PIN_EXISTS(MAX31865_MISO) && PIN_EXISTS(MAX31865_SCK) + #define MAX31865_USES_SW_SPI 1 #endif #if TEMP_SENSOR_0_IS_MAX31865 && PIN_EXISTS(MAX31865_CS) #define HAS_MAX31865_TEMP 1 - Adafruit_MAX31865 max31865_0 = Adafruit_MAX31865(MAX31865_CS_PIN - #if MAX31865_CS_PIN != MAX6675_SS_PIN - , MAX31865_MOSI_PIN, MAX31865_MISO_PIN, MAX31865_SCK_PIN // For software SPI also set MOSI/MISO/SCK - #endif - ); + Adafruit_MAX31865 max31865_0 = Adafruit_MAX31865(MAX31865_CS_PIN + #if MAX31865_USES_SW_SPI && PIN_EXISTS(MAX31865_MOSI) + , MAX31865_MOSI_PIN, MAX31865_MISO_PIN, MAX31865_SCK_PIN // For software SPI also set MOSI/MISO/SCK + #endif + #if ENABLED(LARGE_PINMAP) + , HIGH + #endif + ); #endif #if TEMP_SENSOR_1_IS_MAX31865 && PIN_EXISTS(MAX31865_CS2) #define HAS_MAX31865_TEMP 1 Adafruit_MAX31865 max31865_1 = Adafruit_MAX31865(MAX31865_CS2_PIN - #if MAX31865_CS2_PIN != MAX6675_SS2_PIN - , MAX31865_MOSI_PIN, MAX31865_MISO_PIN, MAX31865_SCK_PIN // For software SPI also set MOSI/MISO/SCK + #if MAX31865_USES_SW_SPI && PIN_EXISTS(MAX31865_MOSI) + , MAX31865_MOSI_PIN, MAX31865_MISO_PIN, MAX31865_SCK_PIN // For software SPI also set MOSI/MISO/SCK + #endif + #if ENABLED(LARGE_PINMAP) + , HIGH #endif ); #endif #endif +// LIB_MAX6675 can be added to the build_flags in platformio.ini to use a user-defined library +#if LIB_USR_MAX6675 + #include + #if PIN_EXISTS(MAX6675_MISO) && PIN_EXISTS(MAX6675_SCK) + #define MAX6675_USES_SW_SPI 1 + #endif + #if TEMP_SENSOR_0_IS_MAX6675 && PIN_EXISTS(MAX6675_CS) + #define HAS_MAX6675_TEMP 1 + MAX6675 max6675_0 = MAX6675(MAX6675_CS_PIN + #if MAX6675_USES_SW_SPI + , MAX6675_MISO_PIN, MAX6675_SCK_PIN // For software SPI also set MISO/SCK + #endif + #if ENABLED(LARGE_PINMAP) + , HIGH + #endif + ); + #endif + #if TEMP_SENSOR_1_IS_MAX6675 && PIN_EXISTS(MAX6675_CS2) + #define HAS_MAX6675_TEMP 1 + MAX6675 max6675_1 = MAX6675(MAX6675_CS2_PIN + #if MAX6675_USES_SW_SPI + , MAX6675_MISO_PIN, MAX6675_SCK_PIN // For software SPI also set MISO/SCK + #endif + #if ENABLED(LARGE_PINMAP) + , HIGH + #endif + ); + #endif +#endif + +#if !HAS_MAX6675_TEMP && !HAS_MAX31855_TEMP && !HAS_MAX31865_TEMP + #define NO_THERMO_TEMPS 1 +#endif + #if (TEMP_SENSOR_0_IS_MAX_TC || TEMP_SENSOR_1_IS_MAX_TC) && PINS_EXIST(MAX6675_SCK, MAX6675_DO) && NO_THERMO_TEMPS #define THERMO_SEPARATE_SPI 1 #endif @@ -1718,9 +1781,38 @@ void Temperature::updateTemperaturesFromRawValues() { * The manager is implemented by periodic calls to manage_heater() */ void Temperature::init() { + // Init (and disable) SPI thermocouples + #if TEMP_SENSOR_0_IS_MAX6675 && PIN_EXISTS(MAX6675_CS) + OUT_WRITE(MAX6675_CS_PIN, HIGH); + #endif + #if TEMP_SENSOR_1_IS_MAX6675 && PIN_EXISTS(MAX6675_CS2) + OUT_WRITE(MAX6675_CS2_PIN, HIGH); + #endif + #if TEMP_SENSOR_0_IS_MAX6675 && PIN_EXISTS(MAX31855_CS) + OUT_WRITE(MAX31855_CS_PIN, HIGH); + #endif + #if TEMP_SENSOR_1_IS_MAX6675 && PIN_EXISTS(MAX31855_CS2) + OUT_WRITE(MAX31855_CS2_PIN, HIGH); + #endif + #if TEMP_SENSOR_0_IS_MAX6675 && PIN_EXISTS(MAX31865_CS) + OUT_WRITE(MAX31865_CS_PIN, HIGH); + #endif + #if TEMP_SENSOR_1_IS_MAX6675 && PIN_EXISTS(MAX31865_CS2) + OUT_WRITE(MAX31865_CS2_PIN, HIGH); + #endif - TERN_(TEMP_SENSOR_0_IS_MAX31865, max31865_0.begin(MAX31865_2WIRE)); // MAX31865_2WIRE, MAX31865_3WIRE, MAX31865_4WIRE - TERN_(TEMP_SENSOR_1_IS_MAX31865, max31865_1.begin(MAX31865_2WIRE)); + #if HAS_MAX31865_TEMP + TERN_(TEMP_SENSOR_0_IS_MAX31865, max31865_0.begin(MAX31865_2WIRE)); // MAX31865_2WIRE, MAX31865_3WIRE, MAX31865_4WIRE + TERN_(TEMP_SENSOR_1_IS_MAX31865, max31865_1.begin(MAX31865_2WIRE)); + #endif + #if HAS_MAX31855_TEMP + TERN_(TEMP_SENSOR_0_IS_MAX31855, max31855_0.begin()); + TERN_(TEMP_SENSOR_1_IS_MAX31855, max31855_1.begin()); + #endif + #if HAS_MAX6675_TEMP + TERN_(TEMP_SENSOR_0_IS_MAX6675, max6675_0.begin()); + TERN_(TEMP_SENSOR_1_IS_MAX6675, max6675_1.begin()); + #endif #if EARLY_WATCHDOG // Flag that the thermalManager should be running @@ -2234,7 +2326,7 @@ void Temperature::disable_all_heaters() { int Temperature::read_max_tc(TERN_(HAS_MULTI_MAX_TC, const uint8_t hindex/*=0*/)) { #define MAX6675_HEAT_INTERVAL 250UL - #if HAS_MAX31855 + #if HAS_MAX31855_TEMP static uint32_t max_tc_temp = 2000; #define MAX_TC_ERROR_MASK 7 #define MAX_TC_DISCARD_BITS 18 @@ -2284,65 +2376,91 @@ void Temperature::disable_all_heaters() { if (PENDING(ms, next_max_tc_ms[hindex])) return int(THERMO_TEMP(hindex)); next_max_tc_ms[hindex] = ms + MAX6675_HEAT_INTERVAL; - #if HAS_MAX31865_TEMP - Adafruit_MAX31865 &maxref = THERMO_SEL(max31865_0, max31865_1); - const uint16_t max31865_ohms = (uint32_t(maxref.readRTD()) * THERMO_SEL(MAX31865_CALIBRATION_OHMS_0, MAX31865_CALIBRATION_OHMS_1)) >> 16; - #endif - // // TODO: spiBegin, spiRec and spiInit doesn't work when soft spi is used. // - #if !THERMO_SEPARATE_SPI + #if !THERMO_SEPARATE_SPI && NO_THERMO_TEMPS spiBegin(); spiInit(MAX_TC_SPEED_BITS); #endif - MAX6675_WRITE(LOW); // enable TT_MAX6675 - DELAY_NS(100); // Ensure 100ns delay + #if NO_THERMO_TEMPS + MAX6675_WRITE(LOW); // enable TT_MAX6675 + DELAY_NS(100); // Ensure 100ns delay + #endif + + max_tc_temp = 0; // Read a big-endian temperature value - max_tc_temp = 0; - for (uint8_t i = sizeof(max_tc_temp); i--;) { - max_tc_temp |= TERN(THERMO_SEPARATE_SPI, max_tc_spi.receive(), spiRec()); - if (i > 0) max_tc_temp <<= 8; // shift left if not the last byte - } + #if NO_THERMO_TEMPS + for (uint8_t i = sizeof(max_tc_temp); i--;) { + max_tc_temp |= TERN(THERMO_SEPARATE_SPI, max_tc_spi.receive(), spiRec()); + if (i > 0) max_tc_temp <<= 8; // shift left if not the last byte + } + MAX6675_WRITE(HIGH); // disable TT_MAX6675 + #endif - MAX6675_WRITE(HIGH); // disable TT_MAX6675 + #if HAS_MAX31855_TEMP + Adafruit_MAX31855 &max855ref = THERMO_SEL(max31855_0, max31855_1); + max_tc_temp = max855ref.readRaw32(); + #endif - const uint8_t fault_31865 = TERN1(HAS_MAX31865_TEMP, maxref.readFault()); + #if HAS_MAX31865_TEMP + Adafruit_MAX31865 &max865ref = THERMO_SEL(max31865_0, max31865_1); + #if ENABLED(LIB_USR_MAX31865) + max_tc_temp = max865ref.readRTD_with_Fault(); + #endif + #endif - if (DISABLED(IGNORE_THERMOCOUPLE_ERRORS) && (max_tc_temp & MAX_TC_ERROR_MASK) && fault_31865) { + #if HAS_MAX6675_TEMP + MAX6675 &max6675ref = THERMO_SEL(max6675_0, max6675_1); + max_tc_temp = max6675ref.readRaw16(); + #endif + + #if ENABLED(LIB_ADAFRUIT_MAX31865) + const uint8_t fault_31865 = max865ref.readFault() & 0x3FU; + #endif + + if (DISABLED(IGNORE_THERMOCOUPLE_ERRORS) + && TERN(LIB_ADAFRUIT_MAX31865, fault_31865, (max_tc_temp & MAX_TC_ERROR_MASK)) + ) { max_tc_errors[hindex]++; if (max_tc_errors[hindex] > THERMOCOUPLE_MAX_ERRORS) { SERIAL_ERROR_START(); SERIAL_ECHOPGM("Temp measurement error! "); #if MAX_TC_ERROR_MASK == 7 - SERIAL_ECHOPGM("MAX31855 "); - if (max_tc_temp & 1) + SERIAL_ECHOPGM("MAX31855 Fault : (", max_tc_temp & 0x7, ") >> "); + if (max_tc_temp & 0x1) SERIAL_ECHOLNPGM("Open Circuit"); - else if (max_tc_temp & 2) + else if (max_tc_temp & 0x2) SERIAL_ECHOLNPGM("Short to GND"); - else if (max_tc_temp & 4) + else if (max_tc_temp & 0x4) SERIAL_ECHOLNPGM("Short to VCC"); - #elif HAS_MAX31865_TEMP + #elif HAS_MAX31865 + #if ENABLED(LIB_USR_MAX31865) + // At the present time we do not have the ability to set the MAX31865 HIGH threshold + // or thr LOW threshold, so no need to check for them, zero these bits out + const uint8_t fault_31865 = max865ref.readFault() & 0x3FU; + #endif + max865ref.clearFault(); if (fault_31865) { - maxref.clearFault(); - SERIAL_ECHOPAIR("MAX31865 Fault :(", fault_31865, ") >>"); + SERIAL_EOL(); + SERIAL_ECHOLNPAIR("\nMAX31865 Fault :(", fault_31865, ") >>"); if (fault_31865 & MAX31865_FAULT_HIGHTHRESH) SERIAL_ECHOLNPGM("RTD High Threshold"); - else if (fault_31865 & MAX31865_FAULT_LOWTHRESH) + if (fault_31865 & MAX31865_FAULT_LOWTHRESH) SERIAL_ECHOLNPGM("RTD Low Threshold"); - else if (fault_31865 & MAX31865_FAULT_REFINLOW) + if (fault_31865 & MAX31865_FAULT_REFINLOW) SERIAL_ECHOLNPGM("REFIN- > 0.85 x Bias"); - else if (fault_31865 & MAX31865_FAULT_REFINHIGH) + if (fault_31865 & MAX31865_FAULT_REFINHIGH) SERIAL_ECHOLNPGM("REFIN- < 0.85 x Bias - FORCE- open"); - else if (fault_31865 & MAX31865_FAULT_RTDINLOW) + if (fault_31865 & MAX31865_FAULT_RTDINLOW) SERIAL_ECHOLNPGM("REFIN- < 0.85 x Bias - FORCE- open"); - else if (fault_31865 & MAX31865_FAULT_OVUV) + if (fault_31865 & MAX31865_FAULT_OVUV) SERIAL_ECHOLNPGM("Under/Over voltage"); } #else - SERIAL_ECHOLNPGM("MAX6675"); + SERIAL_ECHOLNPGM("MAX6675 Open Circuit"); #endif // Thermocouple open @@ -2361,7 +2479,13 @@ void Temperature::disable_all_heaters() { #endif // Return the RTD resistance for MAX31865 for display in SHOW_TEMP_ADC_VALUES - TERN_(HAS_MAX31865_TEMP, max_tc_temp = max31865_ohms); + #if HAS_MAX31865_TEMP + #if ENABLED(LIB_ADAFRUIT_MAX31865) + max_tc_temp = (uint32_t(max865ref.readRTD()) * THERMO_SEL(MAX31865_CALIBRATION_OHMS_0, MAX31865_CALIBRATION_OHMS_1)) >> 16; + #elif ENABLED(LIB_USR_MAX31865) + max_tc_temp = (uint32_t(max_tc_temp) * THERMO_SEL(MAX31865_CALIBRATION_OHMS_0, MAX31865_CALIBRATION_OHMS_1)) >> 16; + #endif + #endif THERMO_TEMP(hindex) = max_tc_temp; @@ -3047,7 +3171,8 @@ void Temperature::tick() { SERIAL_ECHOPGM(" /"); SERIAL_PRINT(t, SFP); #if ENABLED(SHOW_TEMP_ADC_VALUES) - SERIAL_ECHOPAIR(" (", r * RECIPROCAL(OVERSAMPLENR)); + // Temperature MAX SPI boards do not have an OVERSAMPLENR defined + SERIAL_ECHOPAIR(" (", TERN(NO_THERMO_TEMPS, false, k == 'T') ? r : r * RECIPROCAL(OVERSAMPLENR)); SERIAL_CHAR(')'); #endif delay(2); diff --git a/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_3.h b/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_3.h index e5b78024cb..db9f85c742 100644 --- a/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_3.h +++ b/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_3.h @@ -22,6 +22,7 @@ #pragma once #define BOARD_INFO_NAME "BTT SKR V1.3" +#define LPC1768_IS_SKRV1_3 1 // // Trinamic Stallguard pins