diff --git a/Marlin/src/feature/powerloss.cpp b/Marlin/src/feature/powerloss.cpp
index a7474794de..a512022320 100644
--- a/Marlin/src/feature/powerloss.cpp
+++ b/Marlin/src/feature/powerloss.cpp
@@ -197,7 +197,7 @@ void PrintJobRecovery::save(const bool force/*=false*/, const float zraise/*=POW
       #endif
     #endif
 
-    #if EXTRUDERS
+    #if HAS_EXTRUDERS
       HOTEND_LOOP() info.target_temperature[e] = thermalManager.degTargetHotend(e);
     #endif
 
diff --git a/Marlin/src/gcode/config/M221.cpp b/Marlin/src/gcode/config/M221.cpp
index 7ba22d1901..e380bfb1c7 100644
--- a/Marlin/src/gcode/config/M221.cpp
+++ b/Marlin/src/gcode/config/M221.cpp
@@ -23,7 +23,7 @@
 #include "../gcode.h"
 #include "../../module/planner.h"
 
-#if EXTRUDERS
+#if HAS_EXTRUDERS
 
 /**
  * M221: Set extrusion percentage (M221 T0 S95)
diff --git a/Marlin/src/gcode/gcode.cpp b/Marlin/src/gcode/gcode.cpp
index 33877cd61c..30151b3bd0 100644
--- a/Marlin/src/gcode/gcode.cpp
+++ b/Marlin/src/gcode/gcode.cpp
@@ -520,7 +520,7 @@ void GcodeSuite::process_parsed_command(const bool no_ok/*=false*/) {
         case 100: M100(); break;                                  // M100: Free Memory Report
       #endif
 
-      #if EXTRUDERS
+      #if HAS_EXTRUDERS
         case 104: M104(); break;                                  // M104: Set hot end temperature
         case 109: M109(); break;                                  // M109: Wait for hotend temperature to reach target
       #endif
@@ -596,8 +596,10 @@ void GcodeSuite::process_parsed_command(const bool no_ok/*=false*/) {
       #endif
       case 81: M81(); break;                                      // M81: Turn off Power, including Power Supply, if possible
 
-      case 82: M82(); break;                                      // M82: Set E axis normal mode (same as other axes)
-      case 83: M83(); break;                                      // M83: Set E axis relative mode
+      #if HAS_EXTRUDERS
+        case 82: M82(); break;                                    // M82: Set E axis normal mode (same as other axes)
+        case 83: M83(); break;                                    // M83: Set E axis relative mode
+      #endif
       case 18: case 84: M18_M84(); break;                         // M18/M84: Disable Steppers / Set Timeout
       case 85: M85(); break;                                      // M85: Set inactivity stepper shutdown timeout
       case 92: M92(); break;                                      // M92: Set the steps-per-unit for one or more axes
@@ -674,7 +676,7 @@ void GcodeSuite::process_parsed_command(const bool no_ok/*=false*/) {
 
       case 220: M220(); break;                                    // M220: Set Feedrate Percentage: S<percent> ("FR" on your LCD)
 
-      #if EXTRUDERS
+      #if HAS_EXTRUDERS
         case 221: M221(); break;                                  // M221: Set Flow Percentage
       #endif
 
diff --git a/Marlin/src/gcode/gcode.h b/Marlin/src/gcode/gcode.h
index cdf04cd0f2..c32575e81e 100644
--- a/Marlin/src/gcode/gcode.h
+++ b/Marlin/src/gcode/gcode.h
@@ -633,10 +633,13 @@ private:
   #if ENABLED(PSU_CONTROL)
     static void M80();
   #endif
-
   static void M81();
-  static void M82();
-  static void M83();
+
+  #if HAS_EXTRUDERS
+    static void M82();
+    static void M83();
+  #endif
+
   static void M85();
   static void M92();
 
@@ -644,7 +647,7 @@ private:
     static void M100();
   #endif
 
-  #if EXTRUDERS
+  #if HAS_EXTRUDERS
     static void M104();
     static void M109();
   #endif
@@ -776,7 +779,7 @@ private:
 
   static void M220();
 
-  #if EXTRUDERS
+  #if HAS_EXTRUDERS
     static void M221();
   #endif
 
diff --git a/Marlin/src/gcode/host/M360.cpp b/Marlin/src/gcode/host/M360.cpp
index f3c242526d..7a0b8e3ab0 100644
--- a/Marlin/src/gcode/host/M360.cpp
+++ b/Marlin/src/gcode/host/M360.cpp
@@ -28,7 +28,7 @@
 #include "../../module/motion.h"
 #include "../../module/planner.h"
 
-#if EXTRUDERS
+#if HAS_EXTRUDERS
   #include "../../module/temperature.h"
 #endif
 
@@ -171,7 +171,7 @@ void GcodeSuite::M360() {
   // Per-Extruder settings
   //
   config_line(PSTR("NumExtruder"), EXTRUDERS);
-  #if EXTRUDERS
+  #if HAS_EXTRUDERS
     LOOP_L_N(e, EXTRUDERS) {
       config_line_e(e, JERK_STR, TERN(HAS_LINEAR_E_JERK, planner.max_e_jerk[E_INDEX_N(e)], TERN(HAS_CLASSIC_JERK, planner.max_jerk.e, DEFAULT_EJERK)));
       config_line_e(e, PSTR("MaxSpeed"), planner.settings.max_feedrate_mm_s[E_AXIS_N(e)]);
diff --git a/Marlin/src/gcode/temp/M104_M109.cpp b/Marlin/src/gcode/temp/M104_M109.cpp
index e54f784153..eb350a577a 100644
--- a/Marlin/src/gcode/temp/M104_M109.cpp
+++ b/Marlin/src/gcode/temp/M104_M109.cpp
@@ -28,7 +28,7 @@
 
 #include "../../inc/MarlinConfigPre.h"
 
-#if EXTRUDERS
+#if HAS_EXTRUDERS
 
 #include "../gcode.h"
 #include "../../module/temperature.h"
diff --git a/Marlin/src/gcode/units/M82_M83.cpp b/Marlin/src/gcode/units/M82_M83.cpp
index d93f0ea5ad..c1767e8057 100644
--- a/Marlin/src/gcode/units/M82_M83.cpp
+++ b/Marlin/src/gcode/units/M82_M83.cpp
@@ -20,6 +20,10 @@
  *
  */
 
+#include "../../inc/MarlinConfigPre.h"
+
+#if HAS_EXTRUDERS
+
 #include "../gcode.h"
 
 /**
@@ -31,3 +35,5 @@ void GcodeSuite::M82() { set_e_absolute(); }
  * M83: Set E codes relative while in Absolute Coordinates (G90) mode
  */
 void GcodeSuite::M83() { set_e_relative(); }
+
+#endif // HAS_EXTRUDERS
diff --git a/Marlin/src/inc/Conditionals_LCD.h b/Marlin/src/inc/Conditionals_LCD.h
index 545ee403a1..8001674dc4 100644
--- a/Marlin/src/inc/Conditionals_LCD.h
+++ b/Marlin/src/inc/Conditionals_LCD.h
@@ -538,7 +538,12 @@
  *  E_MANUAL     - Number of E steppers for LCD move options
  */
 
-#if EXTRUDERS == 0
+#if EXTRUDERS
+  #define HAS_EXTRUDERS 1
+  #if EXTRUDERS > 1
+    #define HAS_MULTI_EXTRUDER 1
+  #endif
+#else
   #undef EXTRUDERS
   #define EXTRUDERS 0
   #undef SINGLENOZZLE
@@ -546,8 +551,6 @@
   #undef SWITCHING_NOZZLE
   #undef MIXING_EXTRUDER
   #undef HOTEND_IDLE_TIMEOUT
-#elif EXTRUDERS > 1
-  #define HAS_MULTI_EXTRUDER 1
 #endif
 
 #if ENABLED(SWITCHING_EXTRUDER)   // One stepper for every two EXTRUDERS
@@ -663,7 +666,7 @@
  * All the logical axes that can be commanded directly by G-code.
  * Delta maps stepper-specific values to ABC steppers.
  */
-#if EXTRUDERS
+#if HAS_EXTRUDERS
   #define LOGICAL_AXES INCREMENT(LINEAR_AXES)
 #else
   #define LOGICAL_AXES LINEAR_AXES
diff --git a/Marlin/src/inc/Conditionals_adv.h b/Marlin/src/inc/Conditionals_adv.h
index 95a7ada83f..1d3253b1cc 100644
--- a/Marlin/src/inc/Conditionals_adv.h
+++ b/Marlin/src/inc/Conditionals_adv.h
@@ -75,7 +75,7 @@
   #define SERVO_DELAY { 50 }
 #endif
 
-#if EXTRUDERS == 0
+#if !HAS_EXTRUDERS
   #define NO_VOLUMETRICS
   #undef TEMP_SENSOR_0
   #undef TEMP_SENSOR_1
diff --git a/Marlin/src/inc/SanityCheck.h b/Marlin/src/inc/SanityCheck.h
index b9eacd0a1a..23201bb387 100644
--- a/Marlin/src/inc/SanityCheck.h
+++ b/Marlin/src/inc/SanityCheck.h
@@ -1555,7 +1555,7 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
 #endif
 
 #if ENABLED(G26_MESH_VALIDATION)
-  #if !EXTRUDERS
+  #if !HAS_EXTRUDERS
     #error "G26_MESH_VALIDATION requires at least one extruder."
   #elif !HAS_MESH
     #error "G26_MESH_VALIDATION requires MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, or AUTO_BED_LEVELING_UBL."
diff --git a/Marlin/src/lcd/HD44780/marlinui_HD44780.cpp b/Marlin/src/lcd/HD44780/marlinui_HD44780.cpp
index 85430c18b0..50c80c9fa0 100644
--- a/Marlin/src/lcd/HD44780/marlinui_HD44780.cpp
+++ b/Marlin/src/lcd/HD44780/marlinui_HD44780.cpp
@@ -954,7 +954,7 @@ void MarlinUI::draw_status_screen() {
             else
           #endif
             {
-              #if EXTRUDERS
+              #if HAS_EXTRUDERS
                 c = 'E';
                 per = planner.flow_percentage[0];
               #endif
diff --git a/Marlin/src/lcd/extui/dgus/DGUSScreenHandler.cpp b/Marlin/src/lcd/extui/dgus/DGUSScreenHandler.cpp
index 5b3bb9e0f3..a1de499f46 100644
--- a/Marlin/src/lcd/extui/dgus/DGUSScreenHandler.cpp
+++ b/Marlin/src/lcd/extui/dgus/DGUSScreenHandler.cpp
@@ -422,7 +422,7 @@ void DGUSScreenHandler::HandleTemperatureChanged(DGUS_VP_Variable &var, void *va
 }
 
 void DGUSScreenHandler::HandleFlowRateChanged(DGUS_VP_Variable &var, void *val_ptr) {
-  #if EXTRUDERS
+  #if HAS_EXTRUDERS
     uint16_t newvalue = swap16(*(uint16_t*)val_ptr);
     uint8_t target_extruder;
     switch (var.VP) {
diff --git a/Marlin/src/lcd/menu/menu_info.cpp b/Marlin/src/lcd/menu/menu_info.cpp
index d00909c7b3..cecccd115d 100644
--- a/Marlin/src/lcd/menu/menu_info.cpp
+++ b/Marlin/src/lcd/menu/menu_info.cpp
@@ -100,7 +100,7 @@ void menu_info_thermistors() {
 
   START_SCREEN();
 
-  #if EXTRUDERS
+  #if HAS_EXTRUDERS
     #define THERMISTOR_ID TEMP_SENSOR_0
     #include "../thermistornames.h"
     STATIC_ITEM_P(PSTR(LCD_STR_E0 ": " THERMISTOR_NAME), SS_INVERT);
@@ -171,7 +171,7 @@ void menu_info_thermistors() {
     PSTRING_ITEM(MSG_INFO_MAX_TEMP, STRINGIFY(HEATER_7_MAXTEMP), SS_LEFT);
   #endif
 
-  #if EXTRUDERS
+  #if HAS_EXTRUDERS
     STATIC_ITEM(TERN(WATCH_HOTENDS, MSG_INFO_RUNAWAY_ON, MSG_INFO_RUNAWAY_OFF), SS_LEFT);
   #endif
 
@@ -278,7 +278,7 @@ void menu_info() {
   #else
     SUBMENU(MSG_INFO_PRINTER_MENU, menu_info_printer);           // Printer Info >
     SUBMENU(MSG_INFO_BOARD_MENU, menu_info_board);               // Board Info >
-    #if EXTRUDERS
+    #if HAS_EXTRUDERS
       SUBMENU(MSG_INFO_THERMISTOR_MENU, menu_info_thermistors);  // Thermistors >
     #endif
   #endif
diff --git a/Marlin/src/lcd/menu/menu_tune.cpp b/Marlin/src/lcd/menu/menu_tune.cpp
index 1a972f63f2..3a0d0c81ca 100644
--- a/Marlin/src/lcd/menu/menu_tune.cpp
+++ b/Marlin/src/lcd/menu/menu_tune.cpp
@@ -195,7 +195,7 @@ void menu_tune() {
   //
   // Flow:
   //
-  #if EXTRUDERS
+  #if HAS_EXTRUDERS
     EDIT_ITEM(int3, MSG_FLOW, &planner.flow_percentage[active_extruder], 10, 999, []{ planner.refresh_e_factor(active_extruder); });
     // Flow En:
     #if HAS_MULTI_EXTRUDER
diff --git a/Marlin/src/module/motion.cpp b/Marlin/src/module/motion.cpp
index ec57b37a71..235a969f66 100644
--- a/Marlin/src/module/motion.cpp
+++ b/Marlin/src/module/motion.cpp
@@ -374,7 +374,7 @@ void line_to_current_position(const_feedRate_t fr_mm_s/*=feedrate_mm_s*/) {
   planner.buffer_line(current_position, fr_mm_s, active_extruder);
 }
 
-#if EXTRUDERS
+#if HAS_EXTRUDERS
   void unscaled_e_move(const_float_t length, const_feedRate_t fr_mm_s) {
     TERN_(HAS_FILAMENT_SENSOR, runout.reset());
     current_position.e += length / planner.e_factor[active_extruder];
@@ -421,7 +421,7 @@ void _internal_move_to_destination(const_feedRate_t fr_mm_s/*=0.0f*/
   const uint16_t old_pct = feedrate_percentage;
   feedrate_percentage = 100;
 
-  #if EXTRUDERS
+  #if HAS_EXTRUDERS
     const float old_fac = planner.e_factor[active_extruder];
     planner.e_factor[active_extruder] = 1.0f;
   #endif
@@ -433,7 +433,7 @@ void _internal_move_to_destination(const_feedRate_t fr_mm_s/*=0.0f*/
 
   feedrate_mm_s = old_feedrate;
   feedrate_percentage = old_pct;
-  #if EXTRUDERS
+  #if HAS_EXTRUDERS
     planner.e_factor[active_extruder] = old_fac;
   #endif
 }
diff --git a/Marlin/src/module/motion.h b/Marlin/src/module/motion.h
index 3c6f044b21..a43af6446b 100644
--- a/Marlin/src/module/motion.h
+++ b/Marlin/src/module/motion.h
@@ -272,7 +272,7 @@ void sync_plan_position_e();
  */
 void line_to_current_position(const_feedRate_t fr_mm_s=feedrate_mm_s);
 
-#if EXTRUDERS
+#if HAS_EXTRUDERS
   void unscaled_e_move(const_float_t length, const_feedRate_t fr_mm_s);
 #endif
 
diff --git a/Marlin/src/module/planner.cpp b/Marlin/src/module/planner.cpp
index dde6e89a1f..714be8019e 100644
--- a/Marlin/src/module/planner.cpp
+++ b/Marlin/src/module/planner.cpp
@@ -164,7 +164,7 @@ float Planner::steps_to_mm[DISTINCT_AXES];      // (mm) Millimeters per step
   xyze_bool_t Planner::last_page_dir{0};
 #endif
 
-#if EXTRUDERS
+#if HAS_EXTRUDERS
   int16_t Planner::flow_percentage[EXTRUDERS] = ARRAY_BY_EXTRUDERS1(100); // Extrusion factor for each extruder
   float Planner::e_factor[EXTRUDERS] = ARRAY_BY_EXTRUDERS1(1.0f); // The flow percentage and volumetric multiplier combine to scale E movement
 #endif
@@ -1836,7 +1836,7 @@ bool Planner::_populate_block(block_t * const block, bool split_move,
                 db = target.b - position.b,
                 dc = target.c - position.c;
 
-  #if EXTRUDERS
+  #if HAS_EXTRUDERS
     int32_t de = target.e - position.e;
   #else
     constexpr int32_t de = 0;
@@ -1848,7 +1848,7 @@ bool Planner::_populate_block(block_t * const block, bool split_move,
       " A:", target.a, " (", da, " steps)"
       " B:", target.b, " (", db, " steps)"
       " C:", target.c, " (", dc, " steps)"
-      #if EXTRUDERS
+      #if HAS_EXTRUDERS
         " E:", target.e, " (", de, " steps)"
       #endif
     );
@@ -1921,7 +1921,7 @@ bool Planner::_populate_block(block_t * const block, bool split_move,
   #endif
   if (de < 0) SBI(dm, E_AXIS);
 
-  #if EXTRUDERS
+  #if HAS_EXTRUDERS
     const float esteps_float = de * e_factor[extruder];
     const uint32_t esteps = ABS(esteps_float) + 0.5f;
   #else
@@ -2003,7 +2003,7 @@ bool Planner::_populate_block(block_t * const block, bool split_move,
     steps_dist_mm.c = dc * steps_to_mm[C_AXIS];
   #endif
 
-  #if EXTRUDERS
+  #if HAS_EXTRUDERS
     steps_dist_mm.e = esteps_float * steps_to_mm[E_AXIS_N(extruder)];
   #else
     steps_dist_mm.e = 0.0f;
@@ -2013,7 +2013,7 @@ bool Planner::_populate_block(block_t * const block, bool split_move,
 
   if (block->steps.a < MIN_STEPS_PER_SEGMENT && block->steps.b < MIN_STEPS_PER_SEGMENT && block->steps.c < MIN_STEPS_PER_SEGMENT) {
     block->millimeters = (0
-      #if EXTRUDERS
+      #if HAS_EXTRUDERS
         + ABS(steps_dist_mm.e)
       #endif
     );
@@ -2046,7 +2046,7 @@ bool Planner::_populate_block(block_t * const block, bool split_move,
     TERN_(BACKLASH_COMPENSATION, backlash.add_correction_steps(da, db, dc, dm, block));
   }
 
-  #if EXTRUDERS
+  #if HAS_EXTRUDERS
     block->steps.e = esteps;
   #endif
 
@@ -2107,7 +2107,7 @@ bool Planner::_populate_block(block_t * const block, bool split_move,
   #endif
 
   // Enable extruder(s)
-  #if EXTRUDERS
+  #if HAS_EXTRUDERS
     if (esteps) {
       TERN_(AUTO_POWER_CONTROL, powerManager.power_on());
 
@@ -2209,7 +2209,7 @@ bool Planner::_populate_block(block_t * const block, bool split_move,
   }
 
   // Limit speed on extruders, if any
-  #if EXTRUDERS
+  #if HAS_EXTRUDERS
     {
       current_speed.e = steps_dist_mm.e * inverse_secs;
       #if HAS_MIXER_SYNC_CHANNEL
diff --git a/Marlin/src/module/planner.h b/Marlin/src/module/planner.h
index db83792b45..2ec90e1fa2 100644
--- a/Marlin/src/module/planner.h
+++ b/Marlin/src/module/planner.h
@@ -337,7 +337,7 @@ class Planner {
       static xyze_bool_t last_page_dir;             // Last page direction given
     #endif
 
-    #if EXTRUDERS
+    #if HAS_EXTRUDERS
       static int16_t flow_percentage[EXTRUDERS];    // Extrusion factor for each extruder
       static float e_factor[EXTRUDERS];             // The flow percentage and volumetric multiplier combine to scale E movement
     #endif
@@ -494,7 +494,7 @@ class Planner {
       static inline void set_max_jerk(const AxisEnum, const_float_t ) {}
     #endif
 
-    #if EXTRUDERS
+    #if HAS_EXTRUDERS
       FORCE_INLINE static void refresh_e_factor(const uint8_t e) {
         e_factor[e] = flow_percentage[e] * 0.01f * TERN(NO_VOLUMETRICS, 1.0f, volumetric_multiplier[e]);
       }
diff --git a/Marlin/src/module/settings.cpp b/Marlin/src/module/settings.cpp
index 56e3c86fd4..eae4728793 100644
--- a/Marlin/src/module/settings.cpp
+++ b/Marlin/src/module/settings.cpp
@@ -402,7 +402,7 @@ typedef struct SettingsDataStruct {
   //
   // ADVANCED_PAUSE_FEATURE
   //
-  #if EXTRUDERS
+  #if HAS_EXTRUDERS
     fil_change_settings_t fc_settings[EXTRUDERS];       // M603 T U L
   #endif
 
@@ -1321,7 +1321,7 @@ void MarlinSettings::postprocess() {
     //
     // Advanced Pause filament load & unload lengths
     //
-    #if EXTRUDERS
+    #if HAS_EXTRUDERS
     {
       #if DISABLED(ADVANCED_PAUSE_FEATURE)
         const fil_change_settings_t fc_settings[EXTRUDERS] = { 0, 0 };
@@ -2235,7 +2235,7 @@ void MarlinSettings::postprocess() {
       //
       // Advanced Pause filament load & unload lengths
       //
-      #if EXTRUDERS
+      #if HAS_EXTRUDERS
       {
         #if DISABLED(ADVANCED_PAUSE_FEATURE)
           fil_change_settings_t fc_settings[EXTRUDERS];
diff --git a/Marlin/src/module/tool_change.cpp b/Marlin/src/module/tool_change.cpp
index 03e85fdd84..cc34acc14f 100644
--- a/Marlin/src/module/tool_change.cpp
+++ b/Marlin/src/module/tool_change.cpp
@@ -822,7 +822,7 @@ void fast_line_to_current(const AxisEnum fr_axis) { _line_to_current(fr_axis, 0.
 
 #endif // ELECTROMAGNETIC_SWITCHING_TOOLHEAD
 
-#if EXTRUDERS
+#if HAS_EXTRUDERS
   inline void invalid_extruder_error(const uint8_t e) {
     SERIAL_ECHO_START();
     SERIAL_CHAR('T'); SERIAL_ECHO(e);
diff --git a/Marlin/src/pins/ramps/pins_3DRAG.h b/Marlin/src/pins/ramps/pins_3DRAG.h
index 6c7f7f4db6..08354ce2ff 100644
--- a/Marlin/src/pins/ramps/pins_3DRAG.h
+++ b/Marlin/src/pins/ramps/pins_3DRAG.h
@@ -144,7 +144,7 @@
 #undef SPINDLE_DIR_PIN
 
 #if HAS_CUTTER
-  #if !EXTRUDERS
+  #if !HAS_EXTRUDERS
     #undef E0_DIR_PIN
     #undef E0_ENABLE_PIN
     #undef E0_STEP_PIN
diff --git a/Marlin/src/pins/sensitive_pins.h b/Marlin/src/pins/sensitive_pins.h
index 1c811601ca..21ba87e8f6 100644
--- a/Marlin/src/pins/sensitive_pins.h
+++ b/Marlin/src/pins/sensitive_pins.h
@@ -353,7 +353,7 @@
 #define _E6_PINS
 #define _E7_PINS
 
-#if EXTRUDERS
+#if HAS_EXTRUDERS
   #undef _E0_PINS
   #define _E0_PINS E0_STEP_PIN, E0_DIR_PIN, E0_ENABLE_PIN, _E0_CS _E0_MS1 _E0_MS2 _E0_MS3
 #endif
diff --git a/buildroot/share/PlatformIO/scripts/common-dependencies.h b/buildroot/share/PlatformIO/scripts/common-dependencies.h
index 18a7303be6..a88e708467 100644
--- a/buildroot/share/PlatformIO/scripts/common-dependencies.h
+++ b/buildroot/share/PlatformIO/scripts/common-dependencies.h
@@ -49,10 +49,6 @@
   #define HAS_GCODE_M876
 #endif
 
-#if EXTRUDERS
-  #define HAS_EXTRUDERS
-#endif
-
 #if ENABLED(DUET_SMART_EFFECTOR) && PIN_EXISTS(SMART_EFFECTOR_MOD)
   #define HAS_SMART_EFF_MOD
 #endif
diff --git a/ini/features.ini b/ini/features.ini
index 6a2ccbedac..2b69daa88a 100644
--- a/ini/features.ini
+++ b/ini/features.ini
@@ -198,7 +198,7 @@ MAGNETIC_PARKING_EXTRUDER              = src_filter=+<src/gcode/probe/M951.cpp>
 SDSUPPORT                              = src_filter=+<src/sd/cardreader.cpp> +<src/sd/Sd2Card.cpp> +<src/sd/SdBaseFile.cpp> +<src/sd/SdFatUtil.cpp> +<src/sd/SdFile.cpp> +<src/sd/SdVolume.cpp> +<src/gcode/sd>
 HAS_MEDIA_SUBCALLS                     = src_filter=+<src/gcode/sd/M32.cpp>
 GCODE_REPEAT_MARKERS                   = src_filter=+<src/feature/repeat.cpp> +<src/gcode/sd/M808.cpp>
-HAS_EXTRUDERS                          = src_filter=+<src/gcode/temp/M104_M109.cpp> +<src/gcode/config/M221.cpp>
+HAS_EXTRUDERS                          = src_filter=+<src/gcode/units/M82_M83.cpp> +<src/gcode/temp/M104_M109.cpp> +<src/gcode/config/M221.cpp>
 HAS_COOLER                             = src_filter=+<src/feature/cooler.cpp> +<src/gcode/temp/M143_M193.cpp>
 AUTO_REPORT_TEMPERATURES               = src_filter=+<src/gcode/temp/M155.cpp>
 INCH_MODE_SUPPORT                      = src_filter=+<src/gcode/units/G20_G21.cpp>
diff --git a/platformio.ini b/platformio.ini
index 4d69ca12df..0516149da9 100644
--- a/platformio.ini
+++ b/platformio.ini
@@ -222,6 +222,7 @@ default_src_filter = +<src/*> -<src/config> -<src/HAL> +<src/HAL/shared>
   -<src/gcode/temp/M104_M109.cpp>
   -<src/gcode/temp/M155.cpp>
   -<src/gcode/units/G20_G21.cpp>
+  -<src/gcode/units/M82_M83.cpp>
   -<src/gcode/units/M149.cpp>
   -<src/libs/BL24CXX.cpp> -<src/libs/W25Qxx.cpp>
   -<src/libs/L64XX> -<src/module/stepper/L64xx.cpp> -<src/HAL/shared/HAL_spi_L6470.cpp>