MPCNC/Firmware2
1
0
Fork 0
Code Issues 1 Pull Requests Releases Wiki Activity

static'ified Marlin.pde.

Browse Source
This commit is contained in:
Bernhard Kubicek 2011-11-06 19:48:37 +01:00
parent 79d1bfb5c0
commit 87aaf0f70a
2 changed files with 127 additions and 110 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

14
Marlin/Configuration.h
View File

@ -61,11 +61,11 @@ const bool ENDSTOPS_INVERTING = true; // set to true to invert the logic of the
#define ULTIPANEL #define ULTIPANEL
#define ULTIPANEL #define ULTIPANEL
#ifdef ULTIPANEL #ifdef ULTIPANEL
//#define NEWPANEL //enable this if you have a click-encoder panel //#define NEWPANEL //enable this if you have a click-encoder panel
#define SDSUPPORT #define SDSUPPORT
#define ULTRA_LCD #define ULTRA_LCD
#define LCD_WIDTH 20 #define LCD_WIDTH 20
#define LCD_HEIGHT 4 #define LCD_HEIGHT 4
#else //no panel but just lcd #else //no panel but just lcd
#ifdef ULTRA_LCD #ifdef ULTRA_LCD
#define LCD_WIDTH 16 #define LCD_WIDTH 16
@ -251,4 +251,8 @@ const int dropsegments=5; //everything with this number of steps will be ignore
#define BLOCK_BUFFER_SIZE 16 // maximize block buffer #define BLOCK_BUFFER_SIZE 16 // maximize block buffer
#endif #endif
//The ASCII buffer for recieving from the serial:
#define MAX_CMD_SIZE 96
#define BUFSIZE 4
#endif //__CONFIGURATION_H #endif //__CONFIGURATION_H

223
Marlin/Marlin.pde
View File

@ -107,68 +107,82 @@ char version_string[] = "1.0.0 Alpha 1";
//Stepper Movement Variables //Stepper Movement Variables
const char axis_codes[NUM_AXIS] = {'X', 'Y', 'Z', 'E'}; //===========================================================================
float destination[NUM_AXIS] = { 0.0, 0.0, 0.0, 0.0}; //=============================imported variables============================
float current_position[NUM_AXIS] = { 0.0, 0.0, 0.0, 0.0}; //===========================================================================
float offset[3] = {0.0, 0.0, 0.0}; extern float HeaterPower;
bool home_all_axis = true;
float feedrate = 1500.0, next_feedrate, saved_feedrate;
long gcode_N, gcode_LastN;
//public variables
float homing_feedrate[] = HOMING_FEEDRATE; float homing_feedrate[] = HOMING_FEEDRATE;
bool axis_relative_modes[] = AXIS_RELATIVE_MODES; bool axis_relative_modes[] = AXIS_RELATIVE_MODES;
bool relative_mode = false; //Determines Absolute or Relative Coordinates
bool relative_mode_e = false; //Determines Absolute or Relative E Codes while in Absolute Coordinates mode. E is always relative in Relative Coordinates mode.
uint8_t fanpwm=0;
volatile int feedmultiply=100; //100->1 200->2 volatile int feedmultiply=100; //100->1 200->2
int saved_feedmultiply; int saved_feedmultiply;
volatile bool feedmultiplychanged=false; volatile bool feedmultiplychanged=false;
//===========================================================================
//=============================private variables=============================
//===========================================================================
const char axis_codes[NUM_AXIS] = {'X', 'Y', 'Z', 'E'};
static float destination[NUM_AXIS] = { 0.0, 0.0, 0.0, 0.0};
static float current_position[NUM_AXIS] = { 0.0, 0.0, 0.0, 0.0};
static float offset[3] = {0.0, 0.0, 0.0};
static bool home_all_axis = true;
static float feedrate = 1500.0, next_feedrate, saved_feedrate;
static long gcode_N, gcode_LastN;
static bool relative_mode = false; //Determines Absolute or Relative Coordinates
static bool relative_mode_e = false; //Determines Absolute or Relative E Codes while in Absolute Coordinates mode. E is always relative in Relative Coordinates mode.
static uint8_t fanpwm=0;
// comm variables // comm variables
#define MAX_CMD_SIZE 96
#define BUFSIZE 4 static char cmdbuffer[BUFSIZE][MAX_CMD_SIZE];
char cmdbuffer[BUFSIZE][MAX_CMD_SIZE]; static bool fromsd[BUFSIZE];
bool fromsd[BUFSIZE]; static int bufindr = 0;
int bufindr = 0; static int bufindw = 0;
int bufindw = 0; static int buflen = 0;
int buflen = 0; static int i = 0;
int i = 0; static char serial_char;
char serial_char; static int serial_count = 0;
int serial_count = 0; static boolean comment_mode = false;
boolean comment_mode = false; static char *strchr_pointer; // just a pointer to find chars in the cmd string like X, Y, Z, E, etc
char *strchr_pointer; // just a pointer to find chars in the cmd string like X, Y, Z, E, etc
extern float HeaterPower;
const int sensitive_pins[] = SENSITIVE_PINS; // Sensitive pin list for M42 const int sensitive_pins[] = SENSITIVE_PINS; // Sensitive pin list for M42
float tt = 0, bt = 0; static float tt = 0, bt = 0;
//Inactivity shutdown variables //Inactivity shutdown variables
unsigned long previous_millis_cmd = 0; static unsigned long previous_millis_cmd = 0;
unsigned long max_inactive_time = 0; static unsigned long max_inactive_time = 0;
unsigned long stepper_inactive_time = 0; static unsigned long stepper_inactive_time = 0;
static unsigned long starttime=0;
static unsigned long stoptime=0;
unsigned long starttime=0;
unsigned long stoptime=0;
#ifdef SDSUPPORT #ifdef SDSUPPORT
Sd2Card card; static Sd2Card card;
SdVolume volume; static SdVolume volume;
SdFile root; static SdFile root;
SdFile file; static SdFile file;
uint32_t filesize = 0; static uint32_t filesize = 0;
uint32_t sdpos = 0; static uint32_t sdpos = 0;
bool sdmode = false; static bool sdmode = false;
bool sdactive = false; static bool sdactive = false;
bool savetosd = false; static bool savetosd = false;
int16_t n; static int16_t n;
unsigned long autostart_atmillis=0; static unsigned long autostart_atmillis=0;
bool autostart_stilltocheck=true; //the sd start is delayed, because otherwise the serial cannot answer fast enought to make contact with the hostsoftware. static bool autostart_stilltocheck=true; //the sd start is delayed, because otherwise the serial cannot answer fast enought to make contact with the hostsoftware.
#endif //SDSUPPORT
//===========================================================================
//=============================ROUTINES=============================
//===========================================================================
#ifdef SDSUPPORT
void initsd() void initsd()
{ {
sdactive = false; sdactive = false;
@ -223,6 +237,65 @@ unsigned long stoptime=0;
SERIAL_ERRORLN("error writing to file"); SERIAL_ERRORLN("error writing to file");
} }
} }
void checkautostart(bool force)
{
//this is to delay autostart and hence the initialisaiton of the sd card to some seconds after the normal init, so the device is available quick after a reset
if(!force)
{
if(!autostart_stilltocheck)
return;
if(autostart_atmillis<millis())
return;
}
autostart_stilltocheck=false;
if(!sdactive)
{
initsd();
if(!sdactive) //fail
return;
}
static int lastnr=0;
char autoname[30];
sprintf(autoname,"auto%i.g",lastnr);
for(int i=0;i<(int)strlen(autoname);i++)
autoname[i]=tolower(autoname[i]);
dir_t p;
root.rewind();
bool found=false;
while (root.readDir(p) > 0)
{
for(int i=0;i<(int)strlen((char*)p.name);i++)
p.name[i]=tolower(p.name[i]);
//Serial.print((char*)p.name);
//Serial.print(" ");
//Serial.println(autoname);
if(p.name[9]!='~') //skip safety copies
if(strncmp((char*)p.name,autoname,5)==0)
{
char cmd[30];
sprintf(cmd,"M23 %s",autoname);
//sprintf(cmd,"M115");
//enquecommand("G92 Z0");
//enquecommand("G1 Z10 F2000");
//enquecommand("G28 X-105 Y-105");
enquecommand(cmd);
enquecommand("M24");
found=true;
}
}
if(!found)
lastnr=-1;
else
lastnr++;
}
#else //NO SD SUPORT
inline void checkautostart(bool x){};
#endif //SDSUPPORT #endif //SDSUPPORT
@ -272,66 +345,6 @@ void setup()
tp_init(); // Initialize temperature loop tp_init(); // Initialize temperature loop
} }
#ifdef SDSUPPORT
void checkautostart(bool force)
{
//this is to delay autostart and hence the initialisaiton of the sd card to some seconds after the normal init, so the device is available quick after a reset
if(!force)
{
if(!autostart_stilltocheck)
return;
if(autostart_atmillis<millis())
return;
}
autostart_stilltocheck=false;
if(!sdactive)
{
initsd();
if(!sdactive) //fail
return;
}
static int lastnr=0;
char autoname[30];
sprintf(autoname,"auto%i.g",lastnr);
for(int i=0;i<(int)strlen(autoname);i++)
autoname[i]=tolower(autoname[i]);
dir_t p;
root.rewind();
bool found=false;
while (root.readDir(p) > 0)
{
for(int i=0;i<(int)strlen((char*)p.name);i++)
p.name[i]=tolower(p.name[i]);
//Serial.print((char*)p.name);
//Serial.print(" ");
//Serial.println(autoname);
if(p.name[9]!='~') //skip safety copies
if(strncmp((char*)p.name,autoname,5)==0)
{
char cmd[30];
sprintf(cmd,"M23 %s",autoname);
//sprintf(cmd,"M115");
//enquecommand("G92 Z0");
//enquecommand("G1 Z10 F2000");
//enquecommand("G28 X-105 Y-105");
enquecommand(cmd);
enquecommand("M24");
found=true;
}
}
if(!found)
lastnr=-1;
else
lastnr++;
}
#else //NO SD SUPORT
inline void checkautostart(bool x){}
#endif
void loop() void loop()
{ {