Fix SDCARD_CONNECTION default for BTT SKR (#21755)

This commit is contained in:
ellensp 2021-05-01 16:15:16 +12:00 committed by Scott Lahteine
parent 158b26b875
commit 8abef30a75
4 changed files with 66 additions and 62 deletions

View File

@ -52,6 +52,37 @@
#define E0_DIR_PIN P2_13
#define E0_ENABLE_PIN P2_12
/**
* _____ _____
* NC | 1 2 | GND 5V | 1 2 | GND
* RESET | 3 4 | 1.31 NC | 3 4 | NC
* 0.18 | 5 6 3.25 NC | 5 6 0.15
* 1.23 | 7 8 | 3.26 0.16 | 7 8 | 0.18
* 0.15 | 9 10| 0.17 2.11 | 9 10| 1.30
* ----- -----
* EXP2 EXP1
*/
#define EXP1_03_PIN -1
#define EXP1_04_PIN -1
#define EXP1_05_PIN -1
#define EXP1_06_PIN P0_15
#define EXP1_07_PIN P0_16
#define EXP1_08_PIN P0_18
#define EXP1_09_PIN P2_11
#define EXP1_10_PIN P1_30
#define EXP2_03_PIN -1
#define EXP2_04_PIN P1_31
#define EXP2_05_PIN P0_18
#define EXP2_06_PIN P3_25
#define EXP2_07_PIN P1_23
#define EXP2_08_PIN P3_26
#define EXP2_09_PIN P0_15
#define EXP2_10_PIN P0_17
/**
* LCD / Controller
*
@ -68,26 +99,23 @@
#if IS_TFTGLCD_PANEL
#if ENABLED(TFTGLCD_PANEL_SPI)
#define TFTGLCD_CS P3_26
#define TFTGLCD_CS EXP2_08_PIN
#endif
#define SD_DETECT_PIN P1_31
#elif HAS_WIRED_LCD
#define BTN_EN1 P3_26
#define BTN_EN2 P3_25
#define BTN_ENC P2_11
#define BTN_EN1 EXP2_08_PIN
#define BTN_EN2 EXP2_06_PIN
#define BTN_ENC EXP1_09_PIN
#define SD_DETECT_PIN P1_31
#define LCD_SDSS P1_23
#define LCD_PINS_RS P0_16
#define LCD_PINS_ENABLE P0_18
#define LCD_PINS_D4 P0_15
#define LCD_SDSS EXP2_07_PIN
#define LCD_PINS_RS EXP1_07_PIN
#define LCD_PINS_ENABLE EXP2_05_PIN
#define LCD_PINS_D4 EXP2_09_PIN
#if ENABLED(MKS_MINI_12864)
#define DOGLCD_CS P2_06
#define DOGLCD_A0 P0_16
#define DOGLCD_A0 EXP1_07_PIN
#endif
#endif // HAS_WIRED_LCD
@ -106,10 +134,6 @@
#endif
#endif
#if SD_CONNECTION_IS(LCD)
#define SD_SS_PIN P1_23
#endif
// Trinamic driver support
#if HAS_TRINAMIC_CONFIG
@ -140,10 +164,10 @@
// When using any TMC SPI-based drivers, software SPI is used
// because pins may be shared with the display or SD card.
#define TMC_USE_SW_SPI
#define TMC_SW_MOSI P0_18
#define TMC_SW_MISO P0_17
#define TMC_SW_MOSI EXP2_05_PIN
#define TMC_SW_MISO EXP2_10_PIN
// To minimize pin usage use the same clock pin as the display/SD card reader. (May generate LCD noise.)
#define TMC_SW_SCK P0_15
#define TMC_SW_SCK EXP2_09_PIN
// If pin 2_06 is unused, it can be used for the clock to avoid the LCD noise.
//#define TMC_SW_SCK P2_06
@ -186,14 +210,11 @@
// SDCARD_CONNECTION must not be 'LCD'. Nothing should be connected to EXP1/EXP2.
//#define SKR_USE_LCD_PINS_FOR_CS
#if ENABLED(SKR_USE_LCD_PINS_FOR_CS)
#if SD_CONNECTION_IS(LCD)
#error "SDCARD_CONNECTION must not be 'LCD' with SKR_USE_LCD_PINS_FOR_CS."
#endif
#define X_CS_PIN P1_23
#define Y_CS_PIN P3_26
#define Z_CS_PIN P2_11
#define E0_CS_PIN P3_25
#define E1_CS_PIN P1_31
#define X_CS_PIN EXP2_07_PIN
#define Y_CS_PIN EXP2_08_PIN
#define Z_CS_PIN EXP1_09_PIN
#define E0_CS_PIN EXP2_06_PIN
#define E1_CS_PIN EXP2_04_PIN
#endif
// Example 2: A REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
@ -201,19 +222,16 @@
// the pins will be in use. So SDCARD_CONNECTION must not be 'LCD'.
//#define SKR_USE_LCD_SD_CARD_PINS_FOR_CS
#if ENABLED(SKR_USE_LCD_SD_CARD_PINS_FOR_CS)
#if SD_CONNECTION_IS(LCD)
#error "SDCARD_CONNECTION must not be 'LCD' with SKR_USE_LCD_SD_CARD_PINS_FOR_CS."
#endif
#define X_CS_PIN P0_02
#define Y_CS_PIN P0_03
#define Z_CS_PIN P2_06
// We use SD_DETECT_PIN for E0
#undef SD_DETECT_PIN
#define E0_CS_PIN P1_31
#define E0_CS_PIN EXP2_04_PIN
// We use LCD_SDSS pin for E1
#undef LCD_SDSS
#define LCD_SDSS -1
#define E1_CS_PIN P1_23
#define E1_CS_PIN EXP2_07_PIN
#endif
// Example 3: Use the driver enable pins for chip-select.

View File

@ -367,18 +367,6 @@
#endif // HAS_WIRED_LCD
//
// SD Support
//
#ifndef SDCARD_CONNECTION
#define SDCARD_CONNECTION LCD
#endif
#if SD_CONNECTION_IS(LCD)
#define SD_SS_PIN EXP2_07_PIN
#endif
/**
* Special pins
* P1_30 (37) (NOT 5V tolerant)

View File

@ -31,13 +31,6 @@
#define BOARD_CUSTOM_BUILD_FLAGS -DLPC_PINCFG_UART3_P4_28
#endif
//
// SD Connection
//
#ifndef SDCARD_CONNECTION
#define SDCARD_CONNECTION LCD
#endif
//
// Servos
//
@ -263,13 +256,6 @@
#define EXP2_09_PIN P0_15
#define EXP2_10_PIN P0_17
//
// SD Connection
//
#if SD_CONNECTION_IS(LCD)
#define SD_SS_PIN EXP2_07_PIN
#endif
/**
* _____ _____
* NC | · · | GND 5V | · · | GND
@ -443,10 +429,6 @@
#define LCD_SDSS EXP2_07_PIN // (16) J3-7 & AUX-4
#if SD_CONNECTION_IS(LCD)
#define SD_DETECT_PIN EXP2_04_PIN // (49) (NOT 5V tolerant)
#endif
#if ENABLED(FYSETC_MINI_12864)
#define DOGLCD_CS EXP1_08_PIN
#define DOGLCD_A0 EXP1_07_PIN

View File

@ -105,12 +105,28 @@
//
// SD Support
//
#ifndef SDCARD_CONNECTION
#if HAS_WIRED_LCD
#define SDCARD_CONNECTION LCD
#else
#define SDCARD_CONNECTION ONBOARD
#endif
#endif
#define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card
#if SD_CONNECTION_IS(LCD) && ENABLED(SKR_USE_LCD_SD_CARD_PINS_FOR_CS)
#error "SDCARD_CONNECTION must not be 'LCD' with SKR_USE_LCD_PINS_FOR_CS."
#endif
#if SD_CONNECTION_IS(LCD)
#define SD_SCK_PIN P0_15
#define SD_MISO_PIN P0_17
#define SD_MOSI_PIN P0_18
#define SD_SS_PIN EXP2_07_PIN
#define SD_DETECT_PIN EXP2_04_PIN
#elif SD_CONNECTION_IS(ONBOARD)
#undef SD_DETECT_PIN
#define SD_DETECT_PIN P0_27