Merge branch 'Development' into marlin_configurator

Latest upstream changes
This commit is contained in:
Scott Lahteine 2015-03-06 16:32:57 -08:00
commit 8b6766b37b
5 changed files with 3314 additions and 2742 deletions

View File

@ -101,3 +101,25 @@
* M908 - Control digital trimpot directly. * M908 - Control digital trimpot directly.
* M928 - Start SD logging (M928 filename.g) - ended by M29 * M928 - Start SD logging (M928 filename.g) - ended by M29
* M999 - Restart after being stopped by error * M999 - Restart after being stopped by error
# Comments
Comments start at a `;` (semicolon) and end with the end of the line:
N3 T0*57 ; This is a comment
N4 G92 E0*67
; So is this
N5 G28*22
(example taken from the [RepRap wiki](http://reprap.org/wiki/Gcode#Comments))
If you need to use a literal `;` somewhere (for example within `M117`), you can escape semicolons with a `\`
(backslash):
M117 Hello \;)
`\` can also be used to escape `\` itself, if you need a literal `\` in front of a `;`:
M117 backslash: \\;and a comment
Please note that hosts should strip any comments before sending GCODE to the printer in order to save bandwidth.

File diff suppressed because it is too large Load Diff

View File

@ -169,8 +169,8 @@
#define MSG_PID_TIMEOUT MSG_PID_AUTOTUNE_FAILED " timeout" #define MSG_PID_TIMEOUT MSG_PID_AUTOTUNE_FAILED " timeout"
#define MSG_BIAS " bias: " #define MSG_BIAS " bias: "
#define MSG_D " d: " #define MSG_D " d: "
#define MSG_MIN " min: " #define MSG_T_MIN " min: "
#define MSG_MAX " max: " #define MSG_T_MAX " max: "
#define MSG_KU " Ku: " #define MSG_KU " Ku: "
#define MSG_TU " Tu: " #define MSG_TU " Tu: "
#define MSG_CLASSIC_PID " Classic PID " #define MSG_CLASSIC_PID " Classic PID "
@ -226,8 +226,7 @@
#define STR_h3 "3" #define STR_h3 "3"
#define STR_Deg "\271" #define STR_Deg "\271"
#define STR_THERMOMETER "\002" #define STR_THERMOMETER "\002"
#endif #elif defined(DISPLAY_CHARSET_HD44780_WESTERN) // HD44780 ROM Code: A02 (Western)
#ifdef DISPLAY_CHARSET_HD44780_WESTERN // HD44780 ROM Code: A02 (Western)
#define STR_Ae "\216" #define STR_Ae "\216"
#define STR_ae "\204" #define STR_ae "\204"
#define STR_Oe "\211" #define STR_Oe "\211"
@ -239,6 +238,8 @@
#define STR_h3 "\263" #define STR_h3 "\263"
#define STR_Deg "\337" #define STR_Deg "\337"
#define STR_THERMOMETER "\002" #define STR_THERMOMETER "\002"
#elif defined(ULTRA_LCD)
#error You must enable either DISPLAY_CHARSET_HD44780_JAPAN or DISPLAY_CHARSET_HD44780_WESTERN for your LCD controller.
#endif #endif
#endif #endif
/* /*

View File

@ -296,8 +296,8 @@ void PID_autotune(float temp, int extruder, int ncycles)
SERIAL_PROTOCOLPGM(MSG_BIAS); SERIAL_PROTOCOL(bias); SERIAL_PROTOCOLPGM(MSG_BIAS); SERIAL_PROTOCOL(bias);
SERIAL_PROTOCOLPGM(MSG_D); SERIAL_PROTOCOL(d); SERIAL_PROTOCOLPGM(MSG_D); SERIAL_PROTOCOL(d);
SERIAL_PROTOCOLPGM(MSG_MIN); SERIAL_PROTOCOL(min); SERIAL_PROTOCOLPGM(MSG_T_MIN); SERIAL_PROTOCOL(min);
SERIAL_PROTOCOLPGM(MSG_MAX); SERIAL_PROTOCOLLN(max); SERIAL_PROTOCOLPGM(MSG_T_MAX); SERIAL_PROTOCOLLN(max);
if (cycles > 2) { if (cycles > 2) {
Ku = (4.0 * d) / (3.14159265 * (max - min) / 2.0); Ku = (4.0 * d) / (3.14159265 * (max - min) / 2.0);
Tu = ((float)(t_low + t_high) / 1000.0); Tu = ((float)(t_low + t_high) / 1000.0);

View File

@ -41,7 +41,7 @@ The current Marlin dev team consists of:
- Erik van der Zalm ([@ErikZalm](https://github.com/ErikZalm)) - Erik van der Zalm ([@ErikZalm](https://github.com/ErikZalm))
- [@daid](https://github.com/daid) - [@daid](https://github.com/daid)
Sprinters lead developers are Kliment and caru. Sprinters lead developers are Kliment and caru.
Grbls lead developer is Simen Svale Skogsrud. Grbls lead developer is Simen Svale Skogsrud.
Sonney Jeon (Chamnit) improved some parts of grbl Sonney Jeon (Chamnit) improved some parts of grbl
@ -52,9 +52,9 @@ More features have been added by:
- Bradley Feldman, - Bradley Feldman,
- and others... - and others...
## Licence ## License
Marlin is published unde the [GPL license](/Documentation/COPYING.md) because I believe in open development. Marlin is published under the [GPL license](/Documentation/COPYING.md) because I believe in open development.
Please do not use this code in products (3D printers, CNC etc) that are closed source or are crippled by a patent. Please do not use this code in products (3D printers, CNC etc) that are closed source or are crippled by a patent.
[![Flattr this git repo](http://api.flattr.com/button/flattr-badge-large.png)](https://flattr.com/submit/auto?user_id=ErikZalm&url=https://github.com/MarlinFirmware/Marlin&title=Marlin&language=&tags=github&category=software) [![Flattr this git repo](http://api.flattr.com/button/flattr-badge-large.png)](https://flattr.com/submit/auto?user_id=ErikZalm&url=https://github.com/MarlinFirmware/Marlin&title=Marlin&language=&tags=github&category=software)