Add Makeboard MINI for Micromake C1

This commit is contained in:
Scott Lahteine 2017-10-21 00:31:07 -05:00
parent 1fbb307aaf
commit 8c78f8f790
5 changed files with 1520 additions and 62 deletions

View File

@ -119,7 +119,7 @@
// The following define selects which electronics board you have. // The following define selects which electronics board you have.
// Please choose the name from boards.h that matches your setup // Please choose the name from boards.h that matches your setup
#ifndef MOTHERBOARD #ifndef MOTHERBOARD
#define MOTHERBOARD BOARD_RAMPS_14_EFB #define MOTHERBOARD BOARD_MAKEBOARD_MINI
#endif #endif
// Optional custom name for your RepStrap or other custom machine // Optional custom name for your RepStrap or other custom machine
@ -498,7 +498,7 @@
// Enable this feature if all enabled endstop pins are interrupt-capable. // Enable this feature if all enabled endstop pins are interrupt-capable.
// This will remove the need to poll the interrupt pins, saving many CPU cycles. // This will remove the need to poll the interrupt pins, saving many CPU cycles.
#define ENDSTOP_INTERRUPTS_FEATURE //#define ENDSTOP_INTERRUPTS_FEATURE
//============================================================================= //=============================================================================
//============================== Movement Settings ============================ //============================== Movement Settings ============================
@ -525,14 +525,18 @@
* Override with M92 * Override with M92
* X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 100, 150 } // MicroMake 128 Steps // choose your micro step per step configuration ( 16 factory settings )
#define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 100, 150 } // 16 steps per unit for Micromake C1 - Factory Settings - ( MS1 : closed ; MS2 : closed on MAKEBOARD Mini)
//#define DEFAULT_AXIS_STEPS_PER_UNIT { 200, 200, 200, 300 } // 32 steps per unit for Micromake C1 - Custom Settings - ( MS1 : closed ; MS2 : open on MAKEBOARD Mini)
//#define DEFAULT_AXIS_STEPS_PER_UNIT { 400, 400, 400, 600 } // 64 steps per unit for Micromake C1 - Custom Settings - ( MS1 : open ; MS2 : closed on MAKEBOARD Mini)
//#define DEFAULT_AXIS_STEPS_PER_UNIT { 800, 800, 800, 1200 } // 128 steps per unit for Micromake C1 - Custom Settings - ( MS1 : open ; MS2 : open on MAKEBOARD Mini)
/** /**
* Default Max Feed Rate (mm/s) * Default Max Feed Rate (mm/s)
* Override with M203 * Override with M203
* X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_MAX_FEEDRATE { 200, 200, 200, 30 } // MicroMake 128 Steps #define DEFAULT_MAX_FEEDRATE { 200, 200, 200, 30 }
/** /**
* Default Max Acceleration (change/s) change = mm/s * Default Max Acceleration (change/s) change = mm/s
@ -540,7 +544,7 @@
* Override with M201 * Override with M201
* X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 3000, 4000 } // MicroMake 128 Steps #define DEFAULT_MAX_ACCELERATION { 3000, 3000, 3000, 4000 }
/** /**
* Default Acceleration (change/s) change = mm/s * Default Acceleration (change/s) change = mm/s
@ -550,9 +554,9 @@
* M204 R Retract Acceleration * M204 R Retract Acceleration
* M204 T Travel Acceleration * M204 T Travel Acceleration
*/ */
#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves #define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves
#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
/** /**
* Default Jerk (mm/s) * Default Jerk (mm/s)
@ -562,10 +566,10 @@
* When changing speed and direction, if the difference is less than the * When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously. * value set here, it may happen instantaneously.
*/ */
#define DEFAULT_XJERK 20.0 // (mm/sec) #define DEFAULT_XJERK 20.0
#define DEFAULT_YJERK 20.0 // (mm/sec) #define DEFAULT_YJERK 20.0
#define DEFAULT_ZJERK 20.0 // (mm/sec) #define DEFAULT_ZJERK 20.0
#define DEFAULT_EJERK 5.0 // (mm/sec) #define DEFAULT_EJERK 5.0
//=========================================================================== //===========================================================================
//============================= Z Probe Options ============================= //============================= Z Probe Options =============================
@ -774,15 +778,16 @@
// @section machine // @section machine
// The size of the print bed // The size of the print bed
#define X_BED_SIZE 245 #define X_BED_SIZE 240
#define Y_BED_SIZE 245 #define Y_BED_SIZE 240
// Travel limits (mm) after homing, corresponding to endstop positions.
#define X_MIN_POS 0 #define X_MIN_POS 0
#define Y_MIN_POS 0 #define Y_MIN_POS 0
#define Z_MIN_POS 0 #define Z_MIN_POS 0
#define X_MAX_POS X_BED_SIZE #define X_MAX_POS X_BED_SIZE
#define Y_MAX_POS Y_BED_SIZE #define Y_MAX_POS Y_BED_SIZE
#define Z_MAX_POS 263 #define Z_MAX_POS 260
/** /**
* Software Endstops * Software Endstops
@ -890,9 +895,9 @@
// Set the boundaries for probing (where the probe can reach). // Set the boundaries for probing (where the probe can reach).
#define LEFT_PROBE_BED_POSITION 15 #define LEFT_PROBE_BED_POSITION 15
#define RIGHT_PROBE_BED_POSITION 140 #define RIGHT_PROBE_BED_POSITION 170
#define FRONT_PROBE_BED_POSITION 20 #define FRONT_PROBE_BED_POSITION 20
#define BACK_PROBE_BED_POSITION 200 #define BACK_PROBE_BED_POSITION 170
// The Z probe minimum outer margin (to validate G29 parameters). // The Z probe minimum outer margin (to validate G29 parameters).
#define MIN_PROBE_EDGE 10 #define MIN_PROBE_EDGE 10
@ -923,10 +928,10 @@
// 3 arbitrary points to probe. // 3 arbitrary points to probe.
// A simple cross-product is used to estimate the plane of the bed. // A simple cross-product is used to estimate the plane of the bed.
#define ABL_PROBE_PT_1_X 15 #define ABL_PROBE_PT_1_X 15
#define ABL_PROBE_PT_1_Y 140 #define ABL_PROBE_PT_1_Y 180
#define ABL_PROBE_PT_2_X 15 #define ABL_PROBE_PT_2_X 15
#define ABL_PROBE_PT_2_Y 20 #define ABL_PROBE_PT_2_Y 20
#define ABL_PROBE_PT_3_X 200 #define ABL_PROBE_PT_3_X 170
#define ABL_PROBE_PT_3_Y 20 #define ABL_PROBE_PT_3_Y 20
#elif ENABLED(AUTO_BED_LEVELING_UBL) #elif ENABLED(AUTO_BED_LEVELING_UBL)
@ -1051,12 +1056,12 @@
// //
// G20/G21 Inch mode support // G20/G21 Inch mode support
// //
//#define INCH_MODE_SUPPORT #define INCH_MODE_SUPPORT
// //
// M149 Set temperature units support // M149 Set temperature units support
// //
//#define TEMPERATURE_UNITS_SUPPORT #define TEMPERATURE_UNITS_SUPPORT
// @section temperature // @section temperature
@ -1080,7 +1085,7 @@
* P1 Raise the nozzle always to Z-park height. * P1 Raise the nozzle always to Z-park height.
* P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS.
*/ */
//#define NOZZLE_PARK_FEATURE #define NOZZLE_PARK_FEATURE
#if ENABLED(NOZZLE_PARK_FEATURE) #if ENABLED(NOZZLE_PARK_FEATURE)
// Specify a park position as { X, Y, Z } // Specify a park position as { X, Y, Z }
@ -1125,7 +1130,7 @@
* Attention: EXPERIMENTAL. G-code arguments may change. * Attention: EXPERIMENTAL. G-code arguments may change.
* *
*/ */
//#define NOZZLE_CLEAN_FEATURE #define NOZZLE_CLEAN_FEATURE
#if ENABLED(NOZZLE_CLEAN_FEATURE) #if ENABLED(NOZZLE_CLEAN_FEATURE)
// Default number of pattern repetitions // Default number of pattern repetitions
@ -1178,7 +1183,7 @@
* *
* View the current statistics with M78. * View the current statistics with M78.
*/ */
//#define PRINTCOUNTER #define PRINTCOUNTER
//============================================================================= //=============================================================================
//============================= LCD and SD support ============================ //============================= LCD and SD support ============================
@ -1260,7 +1265,7 @@
* *
* Use CRC checks and retries on the SD communication. * Use CRC checks and retries on the SD communication.
*/ */
//#define SD_CHECK_AND_RETRY #define SD_CHECK_AND_RETRY
// //
// ENCODER SETTINGS // ENCODER SETTINGS

View File

@ -119,7 +119,7 @@
// The following define selects which electronics board you have. // The following define selects which electronics board you have.
// Please choose the name from boards.h that matches your setup // Please choose the name from boards.h that matches your setup
#ifndef MOTHERBOARD #ifndef MOTHERBOARD
#define MOTHERBOARD BOARD_RAMPS_14_EFB #define MOTHERBOARD BOARD_MAKEBOARD_MINI
#endif #endif
// Optional custom name for your RepStrap or other custom machine // Optional custom name for your RepStrap or other custom machine
@ -474,17 +474,17 @@
//#define USE_ZMAX_PLUG //#define USE_ZMAX_PLUG
// coarse Endstop Settings // coarse Endstop Settings
//#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors #define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors
#if DISABLED(ENDSTOPPULLUPS) #if DISABLED(ENDSTOPPULLUPS)
// fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined
//#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_XMAX
//#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_YMAX
//#define ENDSTOPPULLUP_ZMAX //#define ENDSTOPPULLUP_ZMAX
#define ENDSTOPPULLUP_XMIN //#define ENDSTOPPULLUP_XMIN
#define ENDSTOPPULLUP_YMIN //#define ENDSTOPPULLUP_YMIN
#define ENDSTOPPULLUP_ZMIN //#define ENDSTOPPULLUP_ZMIN
#define ENDSTOPPULLUP_ZMIN_PROBE //#define ENDSTOPPULLUP_ZMIN_PROBE
#endif #endif
// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
@ -498,7 +498,7 @@
// Enable this feature if all enabled endstop pins are interrupt-capable. // Enable this feature if all enabled endstop pins are interrupt-capable.
// This will remove the need to poll the interrupt pins, saving many CPU cycles. // This will remove the need to poll the interrupt pins, saving many CPU cycles.
#define ENDSTOP_INTERRUPTS_FEATURE //#define ENDSTOP_INTERRUPTS_FEATURE
//============================================================================= //=============================================================================
//============================== Movement Settings ============================ //============================== Movement Settings ============================
@ -525,14 +525,18 @@
* Override with M92 * Override with M92
* X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_AXIS_STEPS_PER_UNIT {800,800,800,1200} // MicroMake 128 Steps // choose your micro step per step configuration ( 16 factory settings )
//#define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 100, 150 } // 16 steps per unit for Micromake C1 - Factory Settings - ( MS1 : closed ; MS2 : closed on MAKEBOARD Mini)
//#define DEFAULT_AXIS_STEPS_PER_UNIT { 200, 200, 200, 300 } // 32 steps per unit for Micromake C1 - Custom Settings - ( MS1 : closed ; MS2 : open on MAKEBOARD Mini)
//#define DEFAULT_AXIS_STEPS_PER_UNIT { 400, 400, 400, 600 } // 64 steps per unit for Micromake C1 - Custom Settings - ( MS1 : open ; MS2 : closed on MAKEBOARD Mini)
#define DEFAULT_AXIS_STEPS_PER_UNIT { 800, 800, 800, 1200 } // 128 steps per unit for Micromake C1 - Custom Settings - ( MS1 : open ; MS2 : open on MAKEBOARD Mini)
/** /**
* Default Max Feed Rate (mm/s) * Default Max Feed Rate (mm/s)
* Override with M203 * Override with M203
* X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_MAX_FEEDRATE {200, 200, 200, 30} // MicroMake 128 Steps #define DEFAULT_MAX_FEEDRATE { 200, 200, 200, 30 }
/** /**
* Default Max Acceleration (change/s) change = mm/s * Default Max Acceleration (change/s) change = mm/s
@ -540,7 +544,7 @@
* Override with M201 * Override with M201
* X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_MAX_ACCELERATION {3000,3000,3000,4000} // MicroMake 128 Steps #define DEFAULT_MAX_ACCELERATION { 3000, 3000, 3000, 4000 }
/** /**
* Default Acceleration (change/s) change = mm/s * Default Acceleration (change/s) change = mm/s
@ -550,9 +554,9 @@
* M204 R Retract Acceleration * M204 R Retract Acceleration
* M204 T Travel Acceleration * M204 T Travel Acceleration
*/ */
#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves #define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves
#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
/** /**
* Default Jerk (mm/s) * Default Jerk (mm/s)
@ -562,10 +566,10 @@
* When changing speed and direction, if the difference is less than the * When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously. * value set here, it may happen instantaneously.
*/ */
#define DEFAULT_XJERK 20.0 // (mm/sec) #define DEFAULT_XJERK 20.0
#define DEFAULT_YJERK 20.0 // (mm/sec) #define DEFAULT_YJERK 20.0
#define DEFAULT_ZJERK 20.0 // (mm/sec) #define DEFAULT_ZJERK 0.4
#define DEFAULT_EJERK 5.0 // (mm/sec) #define DEFAULT_EJERK 5.0
//=========================================================================== //===========================================================================
//============================= Z Probe Options ============================= //============================= Z Probe Options =============================
@ -679,8 +683,8 @@
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER -50 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER -20 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 0 // Y offset: -front +behind [the nozzle]
#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] #define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle]
// X and Y axis travel speed (mm/m) between probes // X and Y axis travel speed (mm/m) between probes
@ -693,7 +697,7 @@
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
// Use double touch for probing // Use double touch for probing
//#define PROBE_DOUBLE_TOUCH #define PROBE_DOUBLE_TOUCH
/** /**
* Z probes require clearance when deploying, stowing, and moving between * Z probes require clearance when deploying, stowing, and moving between
@ -774,15 +778,16 @@
// @section machine // @section machine
// The size of the print bed // The size of the print bed
#define X_BED_SIZE 245 #define X_BED_SIZE 240
#define Y_BED_SIZE 245 #define Y_BED_SIZE 240
// Travel limits (mm) after homing, corresponding to endstop positions.
#define X_MIN_POS 0 #define X_MIN_POS 0
#define Y_MIN_POS 0 #define Y_MIN_POS 0
#define Z_MIN_POS 0 #define Z_MIN_POS 0
#define X_MAX_POS X_BED_SIZE #define X_MAX_POS X_BED_SIZE
#define Y_MAX_POS Y_BED_SIZE #define Y_MAX_POS Y_BED_SIZE
#define Z_MAX_POS 263 #define Z_MAX_POS 260
/** /**
* Software Endstops * Software Endstops
@ -890,9 +895,9 @@
// Set the boundaries for probing (where the probe can reach). // Set the boundaries for probing (where the probe can reach).
#define LEFT_PROBE_BED_POSITION 15 #define LEFT_PROBE_BED_POSITION 15
#define RIGHT_PROBE_BED_POSITION 140 #define RIGHT_PROBE_BED_POSITION 170
#define FRONT_PROBE_BED_POSITION 20 #define FRONT_PROBE_BED_POSITION 20
#define BACK_PROBE_BED_POSITION 200 #define BACK_PROBE_BED_POSITION 170
// The Z probe minimum outer margin (to validate G29 parameters). // The Z probe minimum outer margin (to validate G29 parameters).
#define MIN_PROBE_EDGE 10 #define MIN_PROBE_EDGE 10
@ -923,10 +928,10 @@
// 3 arbitrary points to probe. // 3 arbitrary points to probe.
// A simple cross-product is used to estimate the plane of the bed. // A simple cross-product is used to estimate the plane of the bed.
#define ABL_PROBE_PT_1_X 15 #define ABL_PROBE_PT_1_X 15
#define ABL_PROBE_PT_1_Y 140 #define ABL_PROBE_PT_1_Y 180
#define ABL_PROBE_PT_2_X 15 #define ABL_PROBE_PT_2_X 15
#define ABL_PROBE_PT_2_Y 20 #define ABL_PROBE_PT_2_Y 20
#define ABL_PROBE_PT_3_X 200 #define ABL_PROBE_PT_3_X 170
#define ABL_PROBE_PT_3_Y 20 #define ABL_PROBE_PT_3_Y 20
#elif ENABLED(AUTO_BED_LEVELING_UBL) #elif ENABLED(AUTO_BED_LEVELING_UBL)
@ -1029,7 +1034,7 @@
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
// //
//#define EEPROM_SETTINGS // Enable for M500 and M501 commands #define EEPROM_SETTINGS // Enable for M500 and M501 commands
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
@ -1051,12 +1056,12 @@
// //
// G20/G21 Inch mode support // G20/G21 Inch mode support
// //
//#define INCH_MODE_SUPPORT #define INCH_MODE_SUPPORT
// //
// M149 Set temperature units support // M149 Set temperature units support
// //
//#define TEMPERATURE_UNITS_SUPPORT #define TEMPERATURE_UNITS_SUPPORT
// @section temperature // @section temperature
@ -1080,7 +1085,7 @@
* P1 Raise the nozzle always to Z-park height. * P1 Raise the nozzle always to Z-park height.
* P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS.
*/ */
//#define NOZZLE_PARK_FEATURE #define NOZZLE_PARK_FEATURE
#if ENABLED(NOZZLE_PARK_FEATURE) #if ENABLED(NOZZLE_PARK_FEATURE)
// Specify a park position as { X, Y, Z } // Specify a park position as { X, Y, Z }
@ -1125,7 +1130,7 @@
* Attention: EXPERIMENTAL. G-code arguments may change. * Attention: EXPERIMENTAL. G-code arguments may change.
* *
*/ */
//#define NOZZLE_CLEAN_FEATURE #define NOZZLE_CLEAN_FEATURE
#if ENABLED(NOZZLE_CLEAN_FEATURE) #if ENABLED(NOZZLE_CLEAN_FEATURE)
// Default number of pattern repetitions // Default number of pattern repetitions
@ -1178,7 +1183,7 @@
* *
* View the current statistics with M78. * View the current statistics with M78.
*/ */
//#define PRINTCOUNTER #define PRINTCOUNTER
//============================================================================= //=============================================================================
//============================= LCD and SD support ============================ //============================= LCD and SD support ============================
@ -1260,7 +1265,7 @@
* *
* Use CRC checks and retries on the SD communication. * Use CRC checks and retries on the SD communication.
*/ */
//#define SD_CHECK_AND_RETRY #define SD_CHECK_AND_RETRY
// //
// ENCODER SETTINGS // ENCODER SETTINGS
@ -1314,7 +1319,7 @@
// If you have a speaker that can produce tones, enable it here. // If you have a speaker that can produce tones, enable it here.
// By default Marlin assumes you have a buzzer with a fixed frequency. // By default Marlin assumes you have a buzzer with a fixed frequency.
// //
//#define SPEAKER #define SPEAKER
// //
// The duration and frequency for the UI feedback sound. // The duration and frequency for the UI feedback sound.
@ -1323,8 +1328,8 @@
// Note: Test audio output with the G-Code: // Note: Test audio output with the G-Code:
// M300 S<frequency Hz> P<duration ms> // M300 S<frequency Hz> P<duration ms>
// //
//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100 #define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100
//#define LCD_FEEDBACK_FREQUENCY_HZ 1000 #define LCD_FEEDBACK_FREQUENCY_HZ 1000
// //
// CONTROLLER TYPE: Standard // CONTROLLER TYPE: Standard

File diff suppressed because it is too large Load Diff

View File

@ -101,6 +101,7 @@
#define BOARD_BAM_DICE_DUE 402 // 2PrintBeta BAM&DICE Due with STK drivers #define BOARD_BAM_DICE_DUE 402 // 2PrintBeta BAM&DICE Due with STK drivers
#define BOARD_BQ_ZUM_MEGA_3D 503 // bq ZUM Mega 3D #define BOARD_BQ_ZUM_MEGA_3D 503 // bq ZUM Mega 3D
#define BOARD_ZRIB_V20 504 // zrib V2.0 control board (Chinese knock off RAMPS replica) #define BOARD_ZRIB_V20 504 // zrib V2.0 control board (Chinese knock off RAMPS replica)
#define BOARD_MAKEBOARD_MINI 431 // MakeBoard Mini v2.1.2 is a control board sold by MicroMake
//ARM 32 //ARM 32
#define BOARD_DUE3DOM 1411 // DUE3DOM for Arduino DUE #define BOARD_DUE3DOM 1411 // DUE3DOM for Arduino DUE
#define BOARD_DUE3DOM_MINI 1412 // DUE3DOM MINI for Arduino DUE #define BOARD_DUE3DOM_MINI 1412 // DUE3DOM MINI for Arduino DUE

View File

@ -118,6 +118,8 @@
#include "pins_RUMBA.h" // ATmega2560 #include "pins_RUMBA.h" // ATmega2560
#elif MB(BQ_ZUM_MEGA_3D) #elif MB(BQ_ZUM_MEGA_3D)
#include "pins_BQ_ZUM_MEGA_3D.h" // ATmega2560 #include "pins_BQ_ZUM_MEGA_3D.h" // ATmega2560
#elif MB(MAKEBOARD_MINI)
#include "pins_MAKEBOARD_MINI.h" // ATmega2560
// //
// Other ATmega1280, ATmega2560 // Other ATmega1280, ATmega2560