Add a Travis test for Z_DUAL_STEPPER_DRIVERS and Z_DUAL_ENDSTOPS (PR#68)

This commit is contained in:
AnHardt 2015-08-11 00:03:31 +02:00 committed by Richard Wackerbarth
parent 6a6e863a47
commit 8d23c4230e

View File

@ -38,6 +38,7 @@ script:
# backup configuration.h
- cp Marlin/Configuration.h Marlin/Configuration.h.backup
- cp Marlin/Configuration_adv.h Marlin/Configuration_adv.h.backup
- cp Marlin/pins_RAMPS_13.h Marlin/pins_RAMPS_13.h.backup
# add sensor for bed
- sed -i 's/#define TEMP_SENSOR_BED 0/#define TEMP_SENSOR_BED 1/g' Marlin/Configuration.h
- rm -rf .build/
@ -159,6 +160,17 @@ script:
- sed -i 's/\/\/#define COREXZ/#define COREXZ/g' Marlin/Configuration.h
- rm -rf .build/
- DISPLAY=:1.0 ~/bin/arduino --verify --board marlin:avr:mega Marlin/Marlin.ino
# Enable Z_DUAL_STEPPER_DRIVERS, Z_DUAL_ENDSTOPS
- cp Marlin/Configuration.h.backup Marlin/Configuration.h
- sed -i 's/\/\/#define Z_DUAL_STEPPER_DRIVERS/#define Z_DUAL_STEPPER_DRIVERS/g' Marlin/Configuration_adv.h
- sed -i 's/\ \ \/\/\ \#define Z_DUAL_ENDSTOPS/#define Z_DUAL_ENDSTOPS/g' Marlin/Configuration_adv.h
- sed -i 's/#define X_MAX_PIN 2/#define X_MAX_PIN -1/g' Marlin/pins_RAMPS_13.h
- sed -i 's/\ \ \ \ \#define Z2_MAX_PIN 36/#define Z2_MAX_PIN 2/g' Marlin/Configuration_adv.h
- rm -rf .build/
- DISPLAY=:1.0 ~/bin/arduino --verify --board marlin:avr:mega Marlin/Marlin.ino
- cp Marlin/Configuration.h.backup Marlin/Configuration.h
- cp Marlin/Configuration_adv.h.backup Marlin/Configuration_adv.h
- cp Marlin/pins_RAMPS_13.h.backup Marlin/pins_RAMPS_13.h
######## Example Configurations ##############
# Delta Config (generic)
- cp Marlin/example_configurations/delta/generic/Configuration* Marlin/