From 90be1c3fa77b4fd5d504131ad06ce5f3197a5811 Mon Sep 17 00:00:00 2001 From: qwewer0 <57561110+qwewer0@users.noreply.github.com> Date: Mon, 25 Jan 2021 08:11:34 +0100 Subject: [PATCH] =?UTF-8?q?=F0=9F=A7=BB=20Cosmetic=20changes=20(#20859)?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit --- Marlin/Configuration.h | 4 ++-- Marlin/Configuration_adv.h | 32 ++++++++++++++++---------------- 2 files changed, 18 insertions(+), 18 deletions(-) diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index d86c448441..fd5b6dc848 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -421,7 +421,7 @@ #define TEMP_SENSOR_CHAMBER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 +#define DUMMY_THERMISTOR_998_VALUE 25 #define DUMMY_THERMISTOR_999_VALUE 100 // Resistor values when using MAX31865 sensors (-5) on TEMP_SENSOR_0 / 1 @@ -1360,7 +1360,7 @@ #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. + #define G26_XY_FEEDRATE 100 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. #define G26_RETRACT_MULTIPLIER 1.0 // G26 Q (retraction) used by default between mesh test elements. #endif diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index 604bbb9359..bcd1d62422 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -163,7 +163,7 @@ #if ENABLED(CHAMBER_VENT) #define CHAMBER_VENT_SERVO_NR 1 // Index of the vent servo #define HIGH_EXCESS_HEAT_LIMIT 5 // How much above target temp to consider there is excess heat in the chamber - #define LOW_EXCESS_HEAT_LIMIT 3 + #define LOW_EXCESS_HEAT_LIMIT 3 #define MIN_COOLING_SLOPE_TIME_CHAMBER_VENT 20 #define MIN_COOLING_SLOPE_DEG_CHAMBER_VENT 1.5 #endif @@ -206,7 +206,7 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_PERIOD 20 // Seconds #define WATCH_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -284,8 +284,8 @@ // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING + #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf + #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 @@ -2056,21 +2056,21 @@ */ //#define FWRETRACT #if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions + #define FWRETRACT_AUTORETRACT // Override slicer retractions #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length + #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length + #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction + #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) + #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) + #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting + #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise + #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) + #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) + #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction + #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously + //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously #endif #endif