From 772460a7b810f5fe9b3a138c01fdfec40f2c0280 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Sat, 5 Mar 2016 20:41:15 -0800 Subject: [PATCH] Various minor spelling corrections Redo of #2939 rebased against RCBugFix --- Marlin/Conditionals.h | 2 +- Marlin/Configuration.h | 10 ++++---- Marlin/Configuration_adv.h | 24 +++++++++---------- Marlin/Makefile | 10 ++++---- Marlin/Marlin.h | 4 ++-- .../Felix/Configuration.h | 6 ++--- .../Felix/Configuration_DUAL.h | 6 ++--- .../Felix/Configuration_adv.h | 24 +++++++++---------- .../Hephestos/Configuration.h | 10 ++++---- .../Hephestos/Configuration_adv.h | 24 +++++++++---------- .../K8200/Configuration.h | 10 ++++---- .../K8200/Configuration_adv.h | 24 +++++++++---------- .../RepRapWorld/Megatronics/Configuration.h | 10 ++++---- .../RigidBot/Configuration.h | 6 ++--- .../RigidBot/Configuration_adv.h | 24 +++++++++---------- .../SCARA/Configuration.h | 6 ++--- .../SCARA/Configuration_adv.h | 24 +++++++++---------- .../TAZ4/Configuration.h | 10 ++++---- .../TAZ4/Configuration_adv.h | 24 +++++++++---------- .../WITBOX/Configuration.h | 10 ++++---- .../WITBOX/Configuration_adv.h | 24 +++++++++---------- .../adafruit/ST7565/Configuration.h | 10 ++++---- .../delta/biv2.5/Configuration.h | 10 ++++---- .../delta/biv2.5/Configuration_adv.h | 24 +++++++++---------- .../delta/generic/Configuration.h | 10 ++++---- .../delta/generic/Configuration_adv.h | 24 +++++++++---------- .../delta/kossel_mini/Configuration.h | 10 ++++---- .../delta/kossel_mini/Configuration_adv.h | 24 +++++++++---------- .../delta/kossel_pro/Configuration.h | 6 ++--- .../delta/kossel_pro/Configuration_adv.h | 24 +++++++++---------- .../delta/kossel_xl/Configuration.h | 10 ++++---- .../delta/kossel_xl/Configuration_adv.h | 24 +++++++++---------- .../makibox/Configuration.h | 10 ++++---- .../makibox/Configuration_adv.h | 24 +++++++++---------- .../tvrrug/Round2/Configuration.h | 10 ++++---- .../tvrrug/Round2/Configuration_adv.h | 24 +++++++++---------- Marlin/language_cn.h | 2 +- Marlin/language_en.h | 2 +- Marlin/language_test.h | 2 +- Marlin/planner.cpp | 2 +- 40 files changed, 272 insertions(+), 272 deletions(-) diff --git a/Marlin/Conditionals.h b/Marlin/Conditionals.h index bf96f0f210..8863b5ae85 100644 --- a/Marlin/Conditionals.h +++ b/Marlin/Conditionals.h @@ -135,7 +135,7 @@ // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/schematics#!shiftregister-connection #if ENABLED(SAV_3DLCD) - #define SR_LCD_2W_NL // Non latching 2 wire shiftregister + #define SR_LCD_2W_NL // Non latching 2 wire shift register #define ULTIPANEL #define NEWPANEL #endif diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index f2b5ba95e9..939a99e306 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -248,13 +248,13 @@ Here are some standard links for getting your machine calibrated: #define PID_BED_INTEGRAL_DRIVE_MAX MAX_BED_POWER //limit for the integral term - //120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) #define DEFAULT_bedKp 10.00 #define DEFAULT_bedKi .023 #define DEFAULT_bedKd 305.4 - //120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //from pidautotune //#define DEFAULT_bedKp 97.1 //#define DEFAULT_bedKi 1.41 @@ -451,7 +451,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l // This mode is preferred because there are more measurements. // // - "3-point" mode - // Probe 3 arbitrary points on the bed (that aren't colinear) + // Probe 3 arbitrary points on the bed (that aren't collinear) // You specify the XY coordinates of all 3 points. // Enable this to sample the bed in a grid (least squares solution). @@ -751,7 +751,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l // @section extras -// Increase the FAN pwm frequency. Removes the PWM noise but increases heating in the FET/Arduino +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino //#define FAST_PWM_FAN // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency @@ -839,7 +839,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l #define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 //Enter the diameter (in mm) of the filament generally used (3.0 mm or 1.75 mm) - this is then used in the slicer software. Used for sensor reading validation #define MEASURED_UPPER_LIMIT 3.30 //upper limit factor used for sensor reading validation in mm #define MEASURED_LOWER_LIMIT 1.90 //lower limit factor for sensor reading validation in mm -#define MAX_MEASUREMENT_DELAY 20 //delay buffer size in bytes (1 byte = 1cm)- limits maximum measurement delay allowable (must be larger than MEASUREMENT_DELAY_CM and lower number saves RAM) +#define MAX_MEASUREMENT_DELAY 20 //delay buffer size in bytes (1 byte = 1cm) - limits maximum measurement delay allowable (must be larger than MEASUREMENT_DELAY_CM and lower number saves RAM) //defines used in the code #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA //set measured to nominal initially diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index a00403fd05..43646c6a59 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -461,7 +461,7 @@ const unsigned int dropsegments = 5; //everything with less than this number of /******************************************************************************\ * enable this section if you have TMC26X motor drivers. - * you need to import the TMC26XStepper library into the arduino IDE for this + * you need to import the TMC26XStepper library into the Arduino IDE for this ******************************************************************************/ // @section tmc @@ -523,7 +523,7 @@ const unsigned int dropsegments = 5; //everything with less than this number of /******************************************************************************\ * enable this section if you have L6470 motor drivers. - * you need to import the L6470 library into the arduino IDE for this + * you need to import the L6470 library into the Arduino IDE for this ******************************************************************************/ // @section l6470 @@ -533,61 +533,61 @@ const unsigned int dropsegments = 5; //everything with less than this number of //#define X_IS_L6470 #define X_MICROSTEPS 16 //number of microsteps - #define X_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define X_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define X_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define X_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define X2_IS_L6470 #define X2_MICROSTEPS 16 //number of microsteps - #define X2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define X2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define X2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define X2_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define Y_IS_L6470 #define Y_MICROSTEPS 16 //number of microsteps - #define Y_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define Y_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define Y_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define Y_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define Y2_IS_L6470 #define Y2_MICROSTEPS 16 //number of microsteps - #define Y2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define Y2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define Y2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define Y2_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define Z_IS_L6470 #define Z_MICROSTEPS 16 //number of microsteps - #define Z_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define Z_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define Z_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define Z_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define Z2_IS_L6470 #define Z2_MICROSTEPS 16 //number of microsteps - #define Z2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define Z2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define Z2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define Z2_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define E0_IS_L6470 #define E0_MICROSTEPS 16 //number of microsteps - #define E0_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define E0_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define E0_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define E0_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define E1_IS_L6470 #define E1_MICROSTEPS 16 //number of microsteps - #define E1_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define E1_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define E1_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define E1_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define E2_IS_L6470 #define E2_MICROSTEPS 16 //number of microsteps - #define E2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define E2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define E2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define E2_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define E3_IS_L6470 #define E3_MICROSTEPS 16 //number of microsteps - #define E3_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define E3_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define E3_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define E3_STALLCURRENT 1500 //current in mA where the driver will detect a stall diff --git a/Marlin/Makefile b/Marlin/Makefile index 68b0de0ba1..00799bbef8 100644 --- a/Marlin/Makefile +++ b/Marlin/Makefile @@ -12,14 +12,14 @@ # # Detailed instructions for using the makefile: # -# 1. Modify the line containg "ARDUINO_INSTALL_DIR" to point to the directory that +# 1. Modify the line containing "ARDUINO_INSTALL_DIR" to point to the directory that # contains the Arduino installation (for example, under Mac OS X, this # might be /Applications/Arduino.app/Contents/Resources/Java). # # 2. Modify the line containing "UPLOAD_PORT" to refer to the filename # representing the USB or serial connection to your Arduino board # (e.g. UPLOAD_PORT = /dev/tty.USB0). If the exact name of this file -# changes, you can use * as a wildcard (e.g. UPLOAD_PORT = /dev/tty.usb*). +# changes, you can use * as a wild card (e.g. UPLOAD_PORT = /dev/tty.usb*). # # 3. Set the line containing "MCU" to match your board's processor. # Older one's are atmega8 based, newer ones like Arduino Mini, Bluetooth @@ -218,7 +218,7 @@ endif # Set to 16Mhz if not yet set. F_CPU ?= 16000000 -# Arduino containd the main source code for the Arduino +# Arduino contained the main source code for the Arduino # Libraries, the "hardware variant" are for boards # that derives from that, and their source are present in # the main Marlin source directory @@ -300,7 +300,7 @@ SRC += twi.c CXXSRC += Wire.cpp endif -#Check for Arduino 1.0.0 or higher and use the correct sourcefiles for that version +#Check for Arduino 1.0.0 or higher and use the correct source files for that version ifeq ($(shell [ $(ARDUINO_VERSION) -ge 100 ] && echo true), true) CXXSRC += main.cpp else @@ -421,7 +421,7 @@ lss: $(BUILD_DIR)/$(TARGET).lss sym: $(BUILD_DIR)/$(TARGET).sym # Program the device. -# Do not try to reset an arduino if it's not one +# Do not try to reset an Arduino if it's not one upload: $(BUILD_DIR)/$(TARGET).hex ifeq (${AVRDUDE_PROGRAMMER}, arduino) stty hup < $(UPLOAD_PORT); true diff --git a/Marlin/Marlin.h b/Marlin/Marlin.h index b463ba75d5..328b71880f 100644 --- a/Marlin/Marlin.h +++ b/Marlin/Marlin.h @@ -6,7 +6,7 @@ #define FORCE_INLINE __attribute__((always_inline)) inline /** - * Compiler warning on unused varable. + * Compiler warning on unused variable. */ #define UNUSED(x) (void) (x) @@ -320,7 +320,7 @@ extern int fanSpeed; #endif #if ENABLED(FILAMENT_SENSOR) - extern float filament_width_nominal; //holds the theoretical filament diameter ie., 3.00 or 1.75 + extern float filament_width_nominal; //holds the theoretical filament diameter i.e., 3.00 or 1.75 extern bool filament_sensor; //indicates that filament sensor readings should control extrusion extern float filament_width_meas; //holds the filament diameter as accurately measured extern signed char measurement_delay[]; //ring buffer to delay measurement diff --git a/Marlin/example_configurations/Felix/Configuration.h b/Marlin/example_configurations/Felix/Configuration.h index ebb18a7930..6b6df86bc2 100644 --- a/Marlin/example_configurations/Felix/Configuration.h +++ b/Marlin/example_configurations/Felix/Configuration.h @@ -433,7 +433,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l // This mode is preferred because there are more measurements. // // - "3-point" mode - // Probe 3 arbitrary points on the bed (that aren't colinear) + // Probe 3 arbitrary points on the bed (that aren't collinear) // You specify the XY coordinates of all 3 points. // Enable this to sample the bed in a grid (least squares solution). @@ -733,7 +733,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l // @section extras -// Increase the FAN pwm frequency. Removes the PWM noise but increases heating in the FET/Arduino +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino #define FAST_PWM_FAN // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency @@ -821,7 +821,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l #define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 //Enter the diameter (in mm) of the filament generally used (3.0 mm or 1.75 mm) - this is then used in the slicer software. Used for sensor reading validation #define MEASURED_UPPER_LIMIT 3.30 //upper limit factor used for sensor reading validation in mm #define MEASURED_LOWER_LIMIT 1.90 //lower limit factor for sensor reading validation in mm -#define MAX_MEASUREMENT_DELAY 20 //delay buffer size in bytes (1 byte = 1cm)- limits maximum measurement delay allowable (must be larger than MEASUREMENT_DELAY_CM and lower number saves RAM) +#define MAX_MEASUREMENT_DELAY 20 //delay buffer size in bytes (1 byte = 1cm) - limits maximum measurement delay allowable (must be larger than MEASUREMENT_DELAY_CM and lower number saves RAM) //defines used in the code #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA //set measured to nominal initially diff --git a/Marlin/example_configurations/Felix/Configuration_DUAL.h b/Marlin/example_configurations/Felix/Configuration_DUAL.h index d1b093ec84..f2b7026b7f 100644 --- a/Marlin/example_configurations/Felix/Configuration_DUAL.h +++ b/Marlin/example_configurations/Felix/Configuration_DUAL.h @@ -404,7 +404,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l // This mode is preferred because there are more measurements. // // - "3-point" mode - // Probe 3 arbitrary points on the bed (that aren't colinear) + // Probe 3 arbitrary points on the bed (that aren't collinear) // You specify the XY coordinates of all 3 points. // Enable this to sample the bed in a grid (least squares solution). @@ -697,7 +697,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l //#define SAV_3DLCD -// Increase the FAN pwm frequency. Removes the PWM noise but increases heating in the FET/Arduino +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino #define FAST_PWM_FAN // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency @@ -785,7 +785,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l #define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 //Enter the diameter (in mm) of the filament generally used (3.0 mm or 1.75 mm) - this is then used in the slicer software. Used for sensor reading validation #define MEASURED_UPPER_LIMIT 3.30 //upper limit factor used for sensor reading validation in mm #define MEASURED_LOWER_LIMIT 1.90 //lower limit factor for sensor reading validation in mm -#define MAX_MEASUREMENT_DELAY 20 //delay buffer size in bytes (1 byte = 1cm)- limits maximum measurement delay allowable (must be larger than MEASUREMENT_DELAY_CM and lower number saves RAM) +#define MAX_MEASUREMENT_DELAY 20 //delay buffer size in bytes (1 byte = 1cm) - limits maximum measurement delay allowable (must be larger than MEASUREMENT_DELAY_CM and lower number saves RAM) //defines used in the code #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA //set measured to nominal initially diff --git a/Marlin/example_configurations/Felix/Configuration_adv.h b/Marlin/example_configurations/Felix/Configuration_adv.h index d2eeedbd32..6c905f361b 100644 --- a/Marlin/example_configurations/Felix/Configuration_adv.h +++ b/Marlin/example_configurations/Felix/Configuration_adv.h @@ -458,7 +458,7 @@ const unsigned int dropsegments = 5; //everything with less than this number of /******************************************************************************\ * enable this section if you have TMC26X motor drivers. - * you need to import the TMC26XStepper library into the arduino IDE for this + * you need to import the TMC26XStepper library into the Arduino IDE for this ******************************************************************************/ // @section tmc @@ -520,7 +520,7 @@ const unsigned int dropsegments = 5; //everything with less than this number of /******************************************************************************\ * enable this section if you have L6470 motor drivers. - * you need to import the L6470 library into the arduino IDE for this + * you need to import the L6470 library into the Arduino IDE for this ******************************************************************************/ // @section l6470 @@ -530,61 +530,61 @@ const unsigned int dropsegments = 5; //everything with less than this number of //#define X_IS_L6470 #define X_MICROSTEPS 16 //number of microsteps - #define X_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define X_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define X_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define X_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define X2_IS_L6470 #define X2_MICROSTEPS 16 //number of microsteps - #define X2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define X2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define X2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define X2_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define Y_IS_L6470 #define Y_MICROSTEPS 16 //number of microsteps - #define Y_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define Y_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define Y_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define Y_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define Y2_IS_L6470 #define Y2_MICROSTEPS 16 //number of microsteps - #define Y2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define Y2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define Y2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define Y2_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define Z_IS_L6470 #define Z_MICROSTEPS 16 //number of microsteps - #define Z_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define Z_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define Z_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define Z_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define Z2_IS_L6470 #define Z2_MICROSTEPS 16 //number of microsteps - #define Z2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define Z2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define Z2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define Z2_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define E0_IS_L6470 #define E0_MICROSTEPS 16 //number of microsteps - #define E0_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define E0_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define E0_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define E0_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define E1_IS_L6470 #define E1_MICROSTEPS 16 //number of microsteps - #define E1_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define E1_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define E1_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define E1_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define E2_IS_L6470 #define E2_MICROSTEPS 16 //number of microsteps - #define E2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define E2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define E2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define E2_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define E3_IS_L6470 #define E3_MICROSTEPS 16 //number of microsteps - #define E3_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define E3_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define E3_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define E3_STALLCURRENT 1500 //current in mA where the driver will detect a stall diff --git a/Marlin/example_configurations/Hephestos/Configuration.h b/Marlin/example_configurations/Hephestos/Configuration.h index 73941e2034..cec6466a71 100644 --- a/Marlin/example_configurations/Hephestos/Configuration.h +++ b/Marlin/example_configurations/Hephestos/Configuration.h @@ -240,13 +240,13 @@ Here are some standard links for getting your machine calibrated: #define PID_BED_INTEGRAL_DRIVE_MAX MAX_BED_POWER //limit for the integral term - //120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) #define DEFAULT_bedKp 10.00 #define DEFAULT_bedKi .023 #define DEFAULT_bedKd 305.4 - //120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //from pidautotune //#define DEFAULT_bedKp 97.1 //#define DEFAULT_bedKi 1.41 @@ -444,7 +444,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo // This mode is preferred because there are more measurements. // // - "3-point" mode - // Probe 3 arbitrary points on the bed (that aren't colinear) + // Probe 3 arbitrary points on the bed (that aren't collinear) // You specify the XY coordinates of all 3 points. // Enable this to sample the bed in a grid (least squares solution). @@ -743,7 +743,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo // @section extras -// Increase the FAN pwm frequency. Removes the PWM noise but increases heating in the FET/Arduino +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino //#define FAST_PWM_FAN // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency @@ -831,7 +831,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo #define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 //Enter the diameter (in mm) of the filament generally used (3.0 mm or 1.75 mm) - this is then used in the slicer software. Used for sensor reading validation #define MEASURED_UPPER_LIMIT 3.30 //upper limit factor used for sensor reading validation in mm #define MEASURED_LOWER_LIMIT 1.90 //lower limit factor for sensor reading validation in mm -#define MAX_MEASUREMENT_DELAY 20 //delay buffer size in bytes (1 byte = 1cm)- limits maximum measurement delay allowable (must be larger than MEASUREMENT_DELAY_CM and lower number saves RAM) +#define MAX_MEASUREMENT_DELAY 20 //delay buffer size in bytes (1 byte = 1cm) - limits maximum measurement delay allowable (must be larger than MEASUREMENT_DELAY_CM and lower number saves RAM) //defines used in the code #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA //set measured to nominal initially diff --git a/Marlin/example_configurations/Hephestos/Configuration_adv.h b/Marlin/example_configurations/Hephestos/Configuration_adv.h index 4121d1a7d9..b43b84649a 100644 --- a/Marlin/example_configurations/Hephestos/Configuration_adv.h +++ b/Marlin/example_configurations/Hephestos/Configuration_adv.h @@ -458,7 +458,7 @@ const unsigned int dropsegments = 5; //everything with less than this number of /******************************************************************************\ * enable this section if you have TMC26X motor drivers. - * you need to import the TMC26XStepper library into the arduino IDE for this + * you need to import the TMC26XStepper library into the Arduino IDE for this ******************************************************************************/ // @section tmc @@ -520,7 +520,7 @@ const unsigned int dropsegments = 5; //everything with less than this number of /******************************************************************************\ * enable this section if you have L6470 motor drivers. - * you need to import the L6470 library into the arduino IDE for this + * you need to import the L6470 library into the Arduino IDE for this ******************************************************************************/ // @section l6470 @@ -530,61 +530,61 @@ const unsigned int dropsegments = 5; //everything with less than this number of //#define X_IS_L6470 #define X_MICROSTEPS 16 //number of microsteps - #define X_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define X_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define X_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define X_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define X2_IS_L6470 #define X2_MICROSTEPS 16 //number of microsteps - #define X2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define X2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define X2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define X2_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define Y_IS_L6470 #define Y_MICROSTEPS 16 //number of microsteps - #define Y_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define Y_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define Y_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define Y_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define Y2_IS_L6470 #define Y2_MICROSTEPS 16 //number of microsteps - #define Y2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define Y2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define Y2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define Y2_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define Z_IS_L6470 #define Z_MICROSTEPS 16 //number of microsteps - #define Z_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define Z_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define Z_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define Z_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define Z2_IS_L6470 #define Z2_MICROSTEPS 16 //number of microsteps - #define Z2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define Z2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define Z2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define Z2_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define E0_IS_L6470 #define E0_MICROSTEPS 16 //number of microsteps - #define E0_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define E0_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define E0_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define E0_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define E1_IS_L6470 #define E1_MICROSTEPS 16 //number of microsteps - #define E1_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define E1_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define E1_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define E1_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define E2_IS_L6470 #define E2_MICROSTEPS 16 //number of microsteps - #define E2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define E2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define E2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define E2_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define E3_IS_L6470 #define E3_MICROSTEPS 16 //number of microsteps - #define E3_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define E3_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define E3_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define E3_STALLCURRENT 1500 //current in mA where the driver will detect a stall diff --git a/Marlin/example_configurations/K8200/Configuration.h b/Marlin/example_configurations/K8200/Configuration.h index aa667c7402..5988055410 100644 --- a/Marlin/example_configurations/K8200/Configuration.h +++ b/Marlin/example_configurations/K8200/Configuration.h @@ -257,13 +257,13 @@ Here are some standard links for getting your machine calibrated: #define PID_BED_INTEGRAL_DRIVE_MAX MAX_BED_POWER //limit for the integral term - //120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) //#define DEFAULT_bedKp 10.00 //#define DEFAULT_bedKi .023 //#define DEFAULT_bedKd 305.4 - //120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //from pidautotune //#define DEFAULT_bedKp 97.1 //#define DEFAULT_bedKi 1.41 @@ -466,7 +466,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l // This mode is preferred because there are more measurements. // // - "3-point" mode - // Probe 3 arbitrary points on the bed (that aren't colinear) + // Probe 3 arbitrary points on the bed (that aren't collinear) // You specify the XY coordinates of all 3 points. // Enable this to sample the bed in a grid (least squares solution). @@ -767,7 +767,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l // @section extras -// Increase the FAN pwm frequency. Removes the PWM noise but increases heating in the FET/Arduino +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino //#define FAST_PWM_FAN // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency @@ -855,7 +855,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l #define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 //Enter the diameter (in mm) of the filament generally used (3.0 mm or 1.75 mm) - this is then used in the slicer software. Used for sensor reading validation #define MEASURED_UPPER_LIMIT 3.30 //upper limit factor used for sensor reading validation in mm #define MEASURED_LOWER_LIMIT 1.90 //lower limit factor for sensor reading validation in mm -#define MAX_MEASUREMENT_DELAY 20 //delay buffer size in bytes (1 byte = 1cm)- limits maximum measurement delay allowable (must be larger than MEASUREMENT_DELAY_CM and lower number saves RAM) +#define MAX_MEASUREMENT_DELAY 20 //delay buffer size in bytes (1 byte = 1cm) - limits maximum measurement delay allowable (must be larger than MEASUREMENT_DELAY_CM and lower number saves RAM) //defines used in the code #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA //set measured to nominal initially diff --git a/Marlin/example_configurations/K8200/Configuration_adv.h b/Marlin/example_configurations/K8200/Configuration_adv.h index ac7bfcf7ff..3b86a1c2f4 100644 --- a/Marlin/example_configurations/K8200/Configuration_adv.h +++ b/Marlin/example_configurations/K8200/Configuration_adv.h @@ -466,7 +466,7 @@ const unsigned int dropsegments = 2; //everything with less than this number of /******************************************************************************\ * enable this section if you have TMC26X motor drivers. - * you need to import the TMC26XStepper library into the arduino IDE for this + * you need to import the TMC26XStepper library into the Arduino IDE for this ******************************************************************************/ // @section tmc @@ -528,7 +528,7 @@ const unsigned int dropsegments = 2; //everything with less than this number of /******************************************************************************\ * enable this section if you have L6470 motor drivers. - * you need to import the L6470 library into the arduino IDE for this + * you need to import the L6470 library into the Arduino IDE for this ******************************************************************************/ // @section l6470 @@ -538,61 +538,61 @@ const unsigned int dropsegments = 2; //everything with less than this number of //#define X_IS_L6470 #define X_MICROSTEPS 16 //number of microsteps - #define X_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define X_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define X_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define X_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define X2_IS_L6470 #define X2_MICROSTEPS 16 //number of microsteps - #define X2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define X2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define X2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define X2_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define Y_IS_L6470 #define Y_MICROSTEPS 16 //number of microsteps - #define Y_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define Y_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define Y_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define Y_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define Y2_IS_L6470 #define Y2_MICROSTEPS 16 //number of microsteps - #define Y2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define Y2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define Y2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define Y2_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define Z_IS_L6470 #define Z_MICROSTEPS 16 //number of microsteps - #define Z_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define Z_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define Z_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define Z_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define Z2_IS_L6470 #define Z2_MICROSTEPS 16 //number of microsteps - #define Z2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define Z2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define Z2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define Z2_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define E0_IS_L6470 #define E0_MICROSTEPS 16 //number of microsteps - #define E0_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define E0_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define E0_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define E0_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define E1_IS_L6470 #define E1_MICROSTEPS 16 //number of microsteps - #define E1_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define E1_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define E1_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define E1_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define E2_IS_L6470 #define E2_MICROSTEPS 16 //number of microsteps - #define E2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define E2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define E2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define E2_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define E3_IS_L6470 #define E3_MICROSTEPS 16 //number of microsteps - #define E3_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define E3_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define E3_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define E3_STALLCURRENT 1500 //current in mA where the driver will detect a stall diff --git a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h index fbcb3f578e..49cf9ddcff 100644 --- a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h +++ b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h @@ -248,13 +248,13 @@ Here are some standard links for getting your machine calibrated: #define PID_BED_INTEGRAL_DRIVE_MAX MAX_BED_POWER //limit for the integral term - //120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) #define DEFAULT_bedKp 10.00 #define DEFAULT_bedKi .023 #define DEFAULT_bedKd 305.4 - //120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //from pidautotune //#define DEFAULT_bedKp 97.1 //#define DEFAULT_bedKi 1.41 @@ -452,7 +452,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l // This mode is preferred because there are more measurements. // // - "3-point" mode - // Probe 3 arbitrary points on the bed (that aren't colinear) + // Probe 3 arbitrary points on the bed (that aren't collinear) // You specify the XY coordinates of all 3 points. // Enable this to sample the bed in a grid (least squares solution). @@ -751,7 +751,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l // @section extras -// Increase the FAN pwm frequency. Removes the PWM noise but increases heating in the FET/Arduino +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino //#define FAST_PWM_FAN // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency @@ -839,7 +839,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l #define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 //Enter the diameter (in mm) of the filament generally used (3.0 mm or 1.75 mm) - this is then used in the slicer software. Used for sensor reading validation #define MEASURED_UPPER_LIMIT 3.30 //upper limit factor used for sensor reading validation in mm #define MEASURED_LOWER_LIMIT 1.90 //lower limit factor for sensor reading validation in mm -#define MAX_MEASUREMENT_DELAY 20 //delay buffer size in bytes (1 byte = 1cm)- limits maximum measurement delay allowable (must be larger than MEASUREMENT_DELAY_CM and lower number saves RAM) +#define MAX_MEASUREMENT_DELAY 20 //delay buffer size in bytes (1 byte = 1cm) - limits maximum measurement delay allowable (must be larger than MEASUREMENT_DELAY_CM and lower number saves RAM) //defines used in the code #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA //set measured to nominal initially diff --git a/Marlin/example_configurations/RigidBot/Configuration.h b/Marlin/example_configurations/RigidBot/Configuration.h index dd625d086f..a9b239a64f 100644 --- a/Marlin/example_configurations/RigidBot/Configuration.h +++ b/Marlin/example_configurations/RigidBot/Configuration.h @@ -442,7 +442,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l // This mode is preferred because there are more measurements. // // - "3-point" mode - // Probe 3 arbitrary points on the bed (that aren't colinear) + // Probe 3 arbitrary points on the bed (that aren't collinear) // You specify the XY coordinates of all 3 points. // Enable this to sample the bed in a grid (least squares solution). @@ -745,7 +745,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l // @section extras -// Increase the FAN pwm frequency. Removes the PWM noise but increases heating in the FET/Arduino +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino //#define FAST_PWM_FAN // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency @@ -833,7 +833,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l #define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 //Enter the diameter (in mm) of the filament generally used (3.0 mm or 1.75 mm) - this is then used in the slicer software. Used for sensor reading validation #define MEASURED_UPPER_LIMIT 3.30 //upper limit factor used for sensor reading validation in mm #define MEASURED_LOWER_LIMIT 1.90 //lower limit factor for sensor reading validation in mm -#define MAX_MEASUREMENT_DELAY 20 //delay buffer size in bytes (1 byte = 1cm)- limits maximum measurement delay allowable (must be larger than MEASUREMENT_DELAY_CM and lower number saves RAM) +#define MAX_MEASUREMENT_DELAY 20 //delay buffer size in bytes (1 byte = 1cm) - limits maximum measurement delay allowable (must be larger than MEASUREMENT_DELAY_CM and lower number saves RAM) //defines used in the code #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA //set measured to nominal initially diff --git a/Marlin/example_configurations/RigidBot/Configuration_adv.h b/Marlin/example_configurations/RigidBot/Configuration_adv.h index 8428c40c2e..f311459cb1 100644 --- a/Marlin/example_configurations/RigidBot/Configuration_adv.h +++ b/Marlin/example_configurations/RigidBot/Configuration_adv.h @@ -461,7 +461,7 @@ const unsigned int dropsegments = 5; //everything with less than this number of /******************************************************************************\ * enable this section if you have TMC26X motor drivers. - * you need to import the TMC26XStepper library into the arduino IDE for this + * you need to import the TMC26XStepper library into the Arduino IDE for this ******************************************************************************/ // @section tmc @@ -523,7 +523,7 @@ const unsigned int dropsegments = 5; //everything with less than this number of /******************************************************************************\ * enable this section if you have L6470 motor drivers. - * you need to import the L6470 library into the arduino IDE for this + * you need to import the L6470 library into the Arduino IDE for this ******************************************************************************/ // @section l6470 @@ -533,61 +533,61 @@ const unsigned int dropsegments = 5; //everything with less than this number of //#define X_IS_L6470 #define X_MICROSTEPS 16 //number of microsteps - #define X_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define X_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define X_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define X_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define X2_IS_L6470 #define X2_MICROSTEPS 16 //number of microsteps - #define X2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define X2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define X2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define X2_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define Y_IS_L6470 #define Y_MICROSTEPS 16 //number of microsteps - #define Y_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define Y_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define Y_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define Y_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define Y2_IS_L6470 #define Y2_MICROSTEPS 16 //number of microsteps - #define Y2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define Y2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define Y2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define Y2_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define Z_IS_L6470 #define Z_MICROSTEPS 16 //number of microsteps - #define Z_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define Z_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define Z_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define Z_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define Z2_IS_L6470 #define Z2_MICROSTEPS 16 //number of microsteps - #define Z2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define Z2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define Z2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define Z2_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define E0_IS_L6470 #define E0_MICROSTEPS 16 //number of microsteps - #define E0_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define E0_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define E0_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define E0_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define E1_IS_L6470 #define E1_MICROSTEPS 16 //number of microsteps - #define E1_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define E1_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define E1_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define E1_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define E2_IS_L6470 #define E2_MICROSTEPS 16 //number of microsteps - #define E2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define E2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define E2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define E2_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define E3_IS_L6470 #define E3_MICROSTEPS 16 //number of microsteps - #define E3_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define E3_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define E3_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define E3_STALLCURRENT 1500 //current in mA where the driver will detect a stall diff --git a/Marlin/example_configurations/SCARA/Configuration.h b/Marlin/example_configurations/SCARA/Configuration.h index c3431ab246..041338c331 100644 --- a/Marlin/example_configurations/SCARA/Configuration.h +++ b/Marlin/example_configurations/SCARA/Configuration.h @@ -459,7 +459,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l // This mode is preferred because there are more measurements. // // - "3-point" mode - // Probe 3 arbitrary points on the bed (that aren't colinear) + // Probe 3 arbitrary points on the bed (that aren't collinear) // You specify the XY coordinates of all 3 points. // Enable this to sample the bed in a grid (least squares solution). @@ -758,7 +758,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l // @section extras -// Increase the FAN pwm frequency. Removes the PWM noise but increases heating in the FET/Arduino +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino //#define FAST_PWM_FAN // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency @@ -846,7 +846,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l #define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 //Enter the diameter (in mm) of the filament generally used (3.0 mm or 1.75 mm) - this is then used in the slicer software. Used for sensor reading validation #define MEASURED_UPPER_LIMIT 3.30 //upper limit factor used for sensor reading validation in mm #define MEASURED_LOWER_LIMIT 1.90 //lower limit factor for sensor reading validation in mm -#define MAX_MEASUREMENT_DELAY 20 //delay buffer size in bytes (1 byte = 1cm)- limits maximum measurement delay allowable (must be larger than MEASUREMENT_DELAY_CM and lower number saves RAM) +#define MAX_MEASUREMENT_DELAY 20 //delay buffer size in bytes (1 byte = 1cm) - limits maximum measurement delay allowable (must be larger than MEASUREMENT_DELAY_CM and lower number saves RAM) //defines used in the code #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA //set measured to nominal initially diff --git a/Marlin/example_configurations/SCARA/Configuration_adv.h b/Marlin/example_configurations/SCARA/Configuration_adv.h index cd2baa1261..3a85b0bf17 100644 --- a/Marlin/example_configurations/SCARA/Configuration_adv.h +++ b/Marlin/example_configurations/SCARA/Configuration_adv.h @@ -458,7 +458,7 @@ const unsigned int dropsegments = 5; //everything with less than this number of /******************************************************************************\ * enable this section if you have TMC26X motor drivers. - * you need to import the TMC26XStepper library into the arduino IDE for this + * you need to import the TMC26XStepper library into the Arduino IDE for this ******************************************************************************/ // @section tmc @@ -520,7 +520,7 @@ const unsigned int dropsegments = 5; //everything with less than this number of /******************************************************************************\ * enable this section if you have L6470 motor drivers. - * you need to import the L6470 library into the arduino IDE for this + * you need to import the L6470 library into the Arduino IDE for this ******************************************************************************/ // @section l6470 @@ -530,61 +530,61 @@ const unsigned int dropsegments = 5; //everything with less than this number of //#define X_IS_L6470 #define X_MICROSTEPS 16 //number of microsteps - #define X_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define X_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define X_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define X_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define X2_IS_L6470 #define X2_MICROSTEPS 16 //number of microsteps - #define X2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define X2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define X2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define X2_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define Y_IS_L6470 #define Y_MICROSTEPS 16 //number of microsteps - #define Y_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define Y_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define Y_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define Y_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define Y2_IS_L6470 #define Y2_MICROSTEPS 16 //number of microsteps - #define Y2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define Y2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define Y2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define Y2_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define Z_IS_L6470 #define Z_MICROSTEPS 16 //number of microsteps - #define Z_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define Z_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define Z_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define Z_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define Z2_IS_L6470 #define Z2_MICROSTEPS 16 //number of microsteps - #define Z2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define Z2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define Z2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define Z2_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define E0_IS_L6470 #define E0_MICROSTEPS 16 //number of microsteps - #define E0_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define E0_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define E0_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define E0_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define E1_IS_L6470 #define E1_MICROSTEPS 16 //number of microsteps - #define E1_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define E1_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define E1_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define E1_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define E2_IS_L6470 #define E2_MICROSTEPS 16 //number of microsteps - #define E2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define E2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define E2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define E2_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define E3_IS_L6470 #define E3_MICROSTEPS 16 //number of microsteps - #define E3_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define E3_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define E3_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define E3_STALLCURRENT 1500 //current in mA where the driver will detect a stall diff --git a/Marlin/example_configurations/TAZ4/Configuration.h b/Marlin/example_configurations/TAZ4/Configuration.h index eb29becca6..5d1b2bb65c 100644 --- a/Marlin/example_configurations/TAZ4/Configuration.h +++ b/Marlin/example_configurations/TAZ4/Configuration.h @@ -268,13 +268,13 @@ Here are some standard links for getting your machine calibrated: //#define DEFAULT_bedKi 60 //#define DEFAULT_bedKd 1800 - //120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) //#define DEFAULT_bedKp 10.00 //#define DEFAULT_bedKi .023 //#define DEFAULT_bedKd 305.4 - //120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //from pidautotune //#define DEFAULT_bedKp 97.1 //#define DEFAULT_bedKi 1.41 @@ -470,7 +470,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l // This mode is preferred because there are more measurements. // // - "3-point" mode - // Probe 3 arbitrary points on the bed (that aren't colinear) + // Probe 3 arbitrary points on the bed (that aren't collinear) // You specify the XY coordinates of all 3 points. // Enable this to sample the bed in a grid (least squares solution). @@ -769,7 +769,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l // @section extras -// Increase the FAN pwm frequency. Removes the PWM noise but increases heating in the FET/Arduino +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino #define FAST_PWM_FAN // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency @@ -857,7 +857,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l #define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 //Enter the diameter (in mm) of the filament generally used (3.0 mm or 1.75 mm) - this is then used in the slicer software. Used for sensor reading validation #define MEASURED_UPPER_LIMIT 3.30 //upper limit factor used for sensor reading validation in mm #define MEASURED_LOWER_LIMIT 1.90 //lower limit factor for sensor reading validation in mm -#define MAX_MEASUREMENT_DELAY 20 //delay buffer size in bytes (1 byte = 1cm)- limits maximum measurement delay allowable (must be larger than MEASUREMENT_DELAY_CM and lower number saves RAM) +#define MAX_MEASUREMENT_DELAY 20 //delay buffer size in bytes (1 byte = 1cm) - limits maximum measurement delay allowable (must be larger than MEASUREMENT_DELAY_CM and lower number saves RAM) //defines used in the code #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA //set measured to nominal initially diff --git a/Marlin/example_configurations/TAZ4/Configuration_adv.h b/Marlin/example_configurations/TAZ4/Configuration_adv.h index f09c589998..0b9d68b89c 100644 --- a/Marlin/example_configurations/TAZ4/Configuration_adv.h +++ b/Marlin/example_configurations/TAZ4/Configuration_adv.h @@ -469,7 +469,7 @@ const unsigned int dropsegments = 5; //everything with less than this number of /******************************************************************************\ * enable this section if you have TMC26X motor drivers. - * you need to import the TMC26XStepper library into the arduino IDE for this + * you need to import the TMC26XStepper library into the Arduino IDE for this ******************************************************************************/ // @section tmc @@ -531,7 +531,7 @@ const unsigned int dropsegments = 5; //everything with less than this number of /******************************************************************************\ * enable this section if you have L6470 motor drivers. - * you need to import the L6470 library into the arduino IDE for this + * you need to import the L6470 library into the Arduino IDE for this ******************************************************************************/ // @section l6470 @@ -541,61 +541,61 @@ const unsigned int dropsegments = 5; //everything with less than this number of //#define X_IS_L6470 #define X_MICROSTEPS 16 //number of microsteps - #define X_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define X_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define X_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define X_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define X2_IS_L6470 #define X2_MICROSTEPS 16 //number of microsteps - #define X2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define X2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define X2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define X2_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define Y_IS_L6470 #define Y_MICROSTEPS 16 //number of microsteps - #define Y_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define Y_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define Y_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define Y_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define Y2_IS_L6470 #define Y2_MICROSTEPS 16 //number of microsteps - #define Y2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define Y2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define Y2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define Y2_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define Z_IS_L6470 #define Z_MICROSTEPS 16 //number of microsteps - #define Z_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define Z_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define Z_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define Z_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define Z2_IS_L6470 #define Z2_MICROSTEPS 16 //number of microsteps - #define Z2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define Z2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define Z2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define Z2_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define E0_IS_L6470 #define E0_MICROSTEPS 16 //number of microsteps - #define E0_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define E0_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define E0_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define E0_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define E1_IS_L6470 #define E1_MICROSTEPS 16 //number of microsteps - #define E1_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define E1_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define E1_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define E1_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define E2_IS_L6470 #define E2_MICROSTEPS 16 //number of microsteps - #define E2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define E2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define E2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define E2_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define E3_IS_L6470 #define E3_MICROSTEPS 16 //number of microsteps - #define E3_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define E3_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define E3_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define E3_STALLCURRENT 1500 //current in mA where the driver will detect a stall diff --git a/Marlin/example_configurations/WITBOX/Configuration.h b/Marlin/example_configurations/WITBOX/Configuration.h index 26db2c01c3..5c50b68634 100644 --- a/Marlin/example_configurations/WITBOX/Configuration.h +++ b/Marlin/example_configurations/WITBOX/Configuration.h @@ -240,13 +240,13 @@ Here are some standard links for getting your machine calibrated: #define PID_BED_INTEGRAL_DRIVE_MAX MAX_BED_POWER //limit for the integral term - //120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) #define DEFAULT_bedKp 10.00 #define DEFAULT_bedKi .023 #define DEFAULT_bedKd 305.4 - //120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //from pidautotune //#define DEFAULT_bedKp 97.1 //#define DEFAULT_bedKi 1.41 @@ -443,7 +443,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo // This mode is preferred because there are more measurements. // // - "3-point" mode - // Probe 3 arbitrary points on the bed (that aren't colinear) + // Probe 3 arbitrary points on the bed (that aren't collinear) // You specify the XY coordinates of all 3 points. // Enable this to sample the bed in a grid (least squares solution). @@ -742,7 +742,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo // @section extras -// Increase the FAN pwm frequency. Removes the PWM noise but increases heating in the FET/Arduino +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino //#define FAST_PWM_FAN // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency @@ -830,7 +830,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo #define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 //Enter the diameter (in mm) of the filament generally used (3.0 mm or 1.75 mm) - this is then used in the slicer software. Used for sensor reading validation #define MEASURED_UPPER_LIMIT 3.30 //upper limit factor used for sensor reading validation in mm #define MEASURED_LOWER_LIMIT 1.90 //lower limit factor for sensor reading validation in mm -#define MAX_MEASUREMENT_DELAY 20 //delay buffer size in bytes (1 byte = 1cm)- limits maximum measurement delay allowable (must be larger than MEASUREMENT_DELAY_CM and lower number saves RAM) +#define MAX_MEASUREMENT_DELAY 20 //delay buffer size in bytes (1 byte = 1cm) - limits maximum measurement delay allowable (must be larger than MEASUREMENT_DELAY_CM and lower number saves RAM) //defines used in the code #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA //set measured to nominal initially diff --git a/Marlin/example_configurations/WITBOX/Configuration_adv.h b/Marlin/example_configurations/WITBOX/Configuration_adv.h index fa947cdb67..7b08b92610 100644 --- a/Marlin/example_configurations/WITBOX/Configuration_adv.h +++ b/Marlin/example_configurations/WITBOX/Configuration_adv.h @@ -458,7 +458,7 @@ const unsigned int dropsegments = 5; //everything with less than this number of /******************************************************************************\ * enable this section if you have TMC26X motor drivers. - * you need to import the TMC26XStepper library into the arduino IDE for this + * you need to import the TMC26XStepper library into the Arduino IDE for this ******************************************************************************/ // @section tmc @@ -520,7 +520,7 @@ const unsigned int dropsegments = 5; //everything with less than this number of /******************************************************************************\ * enable this section if you have L6470 motor drivers. - * you need to import the L6470 library into the arduino IDE for this + * you need to import the L6470 library into the Arduino IDE for this ******************************************************************************/ // @section l6470 @@ -530,61 +530,61 @@ const unsigned int dropsegments = 5; //everything with less than this number of //#define X_IS_L6470 #define X_MICROSTEPS 16 //number of microsteps - #define X_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define X_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define X_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define X_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define X2_IS_L6470 #define X2_MICROSTEPS 16 //number of microsteps - #define X2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define X2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define X2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define X2_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define Y_IS_L6470 #define Y_MICROSTEPS 16 //number of microsteps - #define Y_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define Y_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define Y_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define Y_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define Y2_IS_L6470 #define Y2_MICROSTEPS 16 //number of microsteps - #define Y2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define Y2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define Y2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define Y2_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define Z_IS_L6470 #define Z_MICROSTEPS 16 //number of microsteps - #define Z_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define Z_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define Z_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define Z_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define Z2_IS_L6470 #define Z2_MICROSTEPS 16 //number of microsteps - #define Z2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define Z2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define Z2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define Z2_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define E0_IS_L6470 #define E0_MICROSTEPS 16 //number of microsteps - #define E0_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define E0_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define E0_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define E0_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define E1_IS_L6470 #define E1_MICROSTEPS 16 //number of microsteps - #define E1_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define E1_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define E1_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define E1_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define E2_IS_L6470 #define E2_MICROSTEPS 16 //number of microsteps - #define E2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define E2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define E2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define E2_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define E3_IS_L6470 #define E3_MICROSTEPS 16 //number of microsteps - #define E3_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define E3_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define E3_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define E3_STALLCURRENT 1500 //current in mA where the driver will detect a stall diff --git a/Marlin/example_configurations/adafruit/ST7565/Configuration.h b/Marlin/example_configurations/adafruit/ST7565/Configuration.h index d14f06d727..2ef81411f6 100644 --- a/Marlin/example_configurations/adafruit/ST7565/Configuration.h +++ b/Marlin/example_configurations/adafruit/ST7565/Configuration.h @@ -248,13 +248,13 @@ Here are some standard links for getting your machine calibrated: #define PID_BED_INTEGRAL_DRIVE_MAX MAX_BED_POWER //limit for the integral term - //120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) #define DEFAULT_bedKp 10.00 #define DEFAULT_bedKi .023 #define DEFAULT_bedKd 305.4 - //120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //from pidautotune //#define DEFAULT_bedKp 97.1 //#define DEFAULT_bedKi 1.41 @@ -452,7 +452,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l // This mode is preferred because there are more measurements. // // - "3-point" mode - // Probe 3 arbitrary points on the bed (that aren't colinear) + // Probe 3 arbitrary points on the bed (that aren't collinear) // You specify the XY coordinates of all 3 points. // Enable this to sample the bed in a grid (least squares solution). @@ -751,7 +751,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l // @section extras -// Increase the FAN pwm frequency. Removes the PWM noise but increases heating in the FET/Arduino +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino //#define FAST_PWM_FAN // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency @@ -839,7 +839,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l #define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 //Enter the diameter (in mm) of the filament generally used (3.0 mm or 1.75 mm) - this is then used in the slicer software. Used for sensor reading validation #define MEASURED_UPPER_LIMIT 3.30 //upper limit factor used for sensor reading validation in mm #define MEASURED_LOWER_LIMIT 1.90 //lower limit factor for sensor reading validation in mm -#define MAX_MEASUREMENT_DELAY 20 //delay buffer size in bytes (1 byte = 1cm)- limits maximum measurement delay allowable (must be larger than MEASUREMENT_DELAY_CM and lower number saves RAM) +#define MAX_MEASUREMENT_DELAY 20 //delay buffer size in bytes (1 byte = 1cm) - limits maximum measurement delay allowable (must be larger than MEASUREMENT_DELAY_CM and lower number saves RAM) //defines used in the code #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA //set measured to nominal initially diff --git a/Marlin/example_configurations/delta/biv2.5/Configuration.h b/Marlin/example_configurations/delta/biv2.5/Configuration.h index a171c53bdb..e764852cd7 100644 --- a/Marlin/example_configurations/delta/biv2.5/Configuration.h +++ b/Marlin/example_configurations/delta/biv2.5/Configuration.h @@ -248,13 +248,13 @@ Here are some standard links for getting your machine calibrated: #define PID_BED_INTEGRAL_DRIVE_MAX MAX_BED_POWER //limit for the integral term - //120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) #define DEFAULT_bedKp 10.00 #define DEFAULT_bedKi .023 #define DEFAULT_bedKd 305.4 - //120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //from pidautotune //#define DEFAULT_bedKp 97.1 //#define DEFAULT_bedKi 1.41 @@ -486,7 +486,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo // This mode is preferred because there are more measurements. // // - "3-point" mode - // Probe 3 arbitrary points on the bed (that aren't colinear) + // Probe 3 arbitrary points on the bed (that aren't collinear) // You specify the XY coordinates of all 3 points. // Enable this to sample the bed in a grid (least squares solution). @@ -875,7 +875,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo // @section extras -// Increase the FAN pwm frequency. Removes the PWM noise but increases heating in the FET/Arduino +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino //#define FAST_PWM_FAN // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency @@ -963,7 +963,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo #define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 //Enter the diameter (in mm) of the filament generally used (3.0 mm or 1.75 mm) - this is then used in the slicer software. Used for sensor reading validation #define MEASURED_UPPER_LIMIT 3.30 //upper limit factor used for sensor reading validation in mm #define MEASURED_LOWER_LIMIT 1.90 //lower limit factor for sensor reading validation in mm -#define MAX_MEASUREMENT_DELAY 20 //delay buffer size in bytes (1 byte = 1cm)- limits maximum measurement delay allowable (must be larger than MEASUREMENT_DELAY_CM and lower number saves RAM) +#define MAX_MEASUREMENT_DELAY 20 //delay buffer size in bytes (1 byte = 1cm) - limits maximum measurement delay allowable (must be larger than MEASUREMENT_DELAY_CM and lower number saves RAM) //defines used in the code #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA //set measured to nominal initially diff --git a/Marlin/example_configurations/delta/biv2.5/Configuration_adv.h b/Marlin/example_configurations/delta/biv2.5/Configuration_adv.h index 6850cf34d9..64c222f51e 100644 --- a/Marlin/example_configurations/delta/biv2.5/Configuration_adv.h +++ b/Marlin/example_configurations/delta/biv2.5/Configuration_adv.h @@ -459,7 +459,7 @@ const unsigned int dropsegments = 5; //everything with less than this number of /******************************************************************************\ * enable this section if you have TMC26X motor drivers. - * you need to import the TMC26XStepper library into the arduino IDE for this + * you need to import the TMC26XStepper library into the Arduino IDE for this ******************************************************************************/ // @section tmc @@ -521,7 +521,7 @@ const unsigned int dropsegments = 5; //everything with less than this number of /******************************************************************************\ * enable this section if you have L6470 motor drivers. - * you need to import the L6470 library into the arduino IDE for this + * you need to import the L6470 library into the Arduino IDE for this ******************************************************************************/ // @section l6470 @@ -531,61 +531,61 @@ const unsigned int dropsegments = 5; //everything with less than this number of //#define X_IS_L6470 #define X_MICROSTEPS 16 //number of microsteps - #define X_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define X_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define X_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define X_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define X2_IS_L6470 #define X2_MICROSTEPS 16 //number of microsteps - #define X2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define X2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define X2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define X2_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define Y_IS_L6470 #define Y_MICROSTEPS 16 //number of microsteps - #define Y_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define Y_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define Y_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define Y_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define Y2_IS_L6470 #define Y2_MICROSTEPS 16 //number of microsteps - #define Y2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define Y2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define Y2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define Y2_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define Z_IS_L6470 #define Z_MICROSTEPS 16 //number of microsteps - #define Z_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define Z_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define Z_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define Z_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define Z2_IS_L6470 #define Z2_MICROSTEPS 16 //number of microsteps - #define Z2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define Z2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define Z2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define Z2_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define E0_IS_L6470 #define E0_MICROSTEPS 16 //number of microsteps - #define E0_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define E0_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define E0_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define E0_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define E1_IS_L6470 #define E1_MICROSTEPS 16 //number of microsteps - #define E1_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define E1_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define E1_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define E1_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define E2_IS_L6470 #define E2_MICROSTEPS 16 //number of microsteps - #define E2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define E2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define E2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define E2_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define E3_IS_L6470 #define E3_MICROSTEPS 16 //number of microsteps - #define E3_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define E3_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define E3_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define E3_STALLCURRENT 1500 //current in mA where the driver will detect a stall diff --git a/Marlin/example_configurations/delta/generic/Configuration.h b/Marlin/example_configurations/delta/generic/Configuration.h index 5d72ca7cd3..8065dc19b9 100644 --- a/Marlin/example_configurations/delta/generic/Configuration.h +++ b/Marlin/example_configurations/delta/generic/Configuration.h @@ -248,13 +248,13 @@ Here are some standard links for getting your machine calibrated: #define PID_BED_INTEGRAL_DRIVE_MAX MAX_BED_POWER //limit for the integral term - //120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) #define DEFAULT_bedKp 10.00 #define DEFAULT_bedKi .023 #define DEFAULT_bedKd 305.4 - //120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //from pidautotune //#define DEFAULT_bedKp 97.1 //#define DEFAULT_bedKi 1.41 @@ -487,7 +487,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo // This mode is preferred because there are more measurements. // // - "3-point" mode - // Probe 3 arbitrary points on the bed (that aren't colinear) + // Probe 3 arbitrary points on the bed (that aren't collinear) // You specify the XY coordinates of all 3 points. // Enable this to sample the bed in a grid (least squares solution). @@ -880,7 +880,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo // @section extras -// Increase the FAN pwm frequency. Removes the PWM noise but increases heating in the FET/Arduino +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino //#define FAST_PWM_FAN // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency @@ -968,7 +968,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo #define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 //Enter the diameter (in mm) of the filament generally used (3.0 mm or 1.75 mm) - this is then used in the slicer software. Used for sensor reading validation #define MEASURED_UPPER_LIMIT 3.30 //upper limit factor used for sensor reading validation in mm #define MEASURED_LOWER_LIMIT 1.90 //lower limit factor for sensor reading validation in mm -#define MAX_MEASUREMENT_DELAY 20 //delay buffer size in bytes (1 byte = 1cm)- limits maximum measurement delay allowable (must be larger than MEASUREMENT_DELAY_CM and lower number saves RAM) +#define MAX_MEASUREMENT_DELAY 20 //delay buffer size in bytes (1 byte = 1cm) - limits maximum measurement delay allowable (must be larger than MEASUREMENT_DELAY_CM and lower number saves RAM) //defines used in the code #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA //set measured to nominal initially diff --git a/Marlin/example_configurations/delta/generic/Configuration_adv.h b/Marlin/example_configurations/delta/generic/Configuration_adv.h index cfb7f12dcf..8af6ca9b9d 100644 --- a/Marlin/example_configurations/delta/generic/Configuration_adv.h +++ b/Marlin/example_configurations/delta/generic/Configuration_adv.h @@ -460,7 +460,7 @@ const unsigned int dropsegments = 5; //everything with less than this number of /******************************************************************************\ * enable this section if you have TMC26X motor drivers. - * you need to import the TMC26XStepper library into the arduino IDE for this + * you need to import the TMC26XStepper library into the Arduino IDE for this ******************************************************************************/ // @section tmc @@ -522,7 +522,7 @@ const unsigned int dropsegments = 5; //everything with less than this number of /******************************************************************************\ * enable this section if you have L6470 motor drivers. - * you need to import the L6470 library into the arduino IDE for this + * you need to import the L6470 library into the Arduino IDE for this ******************************************************************************/ // @section l6470 @@ -532,61 +532,61 @@ const unsigned int dropsegments = 5; //everything with less than this number of //#define X_IS_L6470 #define X_MICROSTEPS 16 //number of microsteps - #define X_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define X_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define X_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define X_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define X2_IS_L6470 #define X2_MICROSTEPS 16 //number of microsteps - #define X2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define X2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define X2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define X2_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define Y_IS_L6470 #define Y_MICROSTEPS 16 //number of microsteps - #define Y_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define Y_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define Y_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define Y_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define Y2_IS_L6470 #define Y2_MICROSTEPS 16 //number of microsteps - #define Y2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define Y2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define Y2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define Y2_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define Z_IS_L6470 #define Z_MICROSTEPS 16 //number of microsteps - #define Z_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define Z_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define Z_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define Z_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define Z2_IS_L6470 #define Z2_MICROSTEPS 16 //number of microsteps - #define Z2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define Z2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define Z2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define Z2_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define E0_IS_L6470 #define E0_MICROSTEPS 16 //number of microsteps - #define E0_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define E0_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define E0_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define E0_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define E1_IS_L6470 #define E1_MICROSTEPS 16 //number of microsteps - #define E1_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define E1_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define E1_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define E1_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define E2_IS_L6470 #define E2_MICROSTEPS 16 //number of microsteps - #define E2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define E2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define E2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define E2_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define E3_IS_L6470 #define E3_MICROSTEPS 16 //number of microsteps - #define E3_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define E3_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define E3_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define E3_STALLCURRENT 1500 //current in mA where the driver will detect a stall diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/kossel_mini/Configuration.h index 9d789973d9..daa3f75615 100644 --- a/Marlin/example_configurations/delta/kossel_mini/Configuration.h +++ b/Marlin/example_configurations/delta/kossel_mini/Configuration.h @@ -248,13 +248,13 @@ Here are some standard links for getting your machine calibrated: #define PID_BED_INTEGRAL_DRIVE_MAX MAX_BED_POWER //limit for the integral term - //120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) #define DEFAULT_bedKp 10.00 #define DEFAULT_bedKi .023 #define DEFAULT_bedKd 305.4 - //120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //from pidautotune //#define DEFAULT_bedKp 97.1 //#define DEFAULT_bedKi 1.41 @@ -487,7 +487,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l // This mode is preferred because there are more measurements. // // - "3-point" mode - // Probe 3 arbitrary points on the bed (that aren't colinear) + // Probe 3 arbitrary points on the bed (that aren't collinear) // You specify the XY coordinates of all 3 points. // Enable this to sample the bed in a grid (least squares solution). @@ -880,7 +880,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l // @section extras -// Increase the FAN pwm frequency. Removes the PWM noise but increases heating in the FET/Arduino +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino //#define FAST_PWM_FAN // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency @@ -968,7 +968,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l #define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 //Enter the diameter (in mm) of the filament generally used (3.0 mm or 1.75 mm) - this is then used in the slicer software. Used for sensor reading validation #define MEASURED_UPPER_LIMIT 3.30 //upper limit factor used for sensor reading validation in mm #define MEASURED_LOWER_LIMIT 1.90 //lower limit factor for sensor reading validation in mm -#define MAX_MEASUREMENT_DELAY 20 //delay buffer size in bytes (1 byte = 1cm)- limits maximum measurement delay allowable (must be larger than MEASUREMENT_DELAY_CM and lower number saves RAM) +#define MAX_MEASUREMENT_DELAY 20 //delay buffer size in bytes (1 byte = 1cm) - limits maximum measurement delay allowable (must be larger than MEASUREMENT_DELAY_CM and lower number saves RAM) //defines used in the code #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA //set measured to nominal initially diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h index 2bb1c2c337..ee4a28cb61 100644 --- a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h +++ b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h @@ -459,7 +459,7 @@ const unsigned int dropsegments = 5; //everything with less than this number of /******************************************************************************\ * enable this section if you have TMC26X motor drivers. - * you need to import the TMC26XStepper library into the arduino IDE for this + * you need to import the TMC26XStepper library into the Arduino IDE for this ******************************************************************************/ // @section tmc @@ -521,7 +521,7 @@ const unsigned int dropsegments = 5; //everything with less than this number of /******************************************************************************\ * enable this section if you have L6470 motor drivers. - * you need to import the L6470 library into the arduino IDE for this + * you need to import the L6470 library into the Arduino IDE for this ******************************************************************************/ // @section l6470 @@ -531,61 +531,61 @@ const unsigned int dropsegments = 5; //everything with less than this number of //#define X_IS_L6470 #define X_MICROSTEPS 16 //number of microsteps - #define X_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define X_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define X_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define X_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define X2_IS_L6470 #define X2_MICROSTEPS 16 //number of microsteps - #define X2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define X2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define X2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define X2_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define Y_IS_L6470 #define Y_MICROSTEPS 16 //number of microsteps - #define Y_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define Y_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define Y_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define Y_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define Y2_IS_L6470 #define Y2_MICROSTEPS 16 //number of microsteps - #define Y2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define Y2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define Y2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define Y2_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define Z_IS_L6470 #define Z_MICROSTEPS 16 //number of microsteps - #define Z_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define Z_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define Z_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define Z_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define Z2_IS_L6470 #define Z2_MICROSTEPS 16 //number of microsteps - #define Z2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define Z2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define Z2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define Z2_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define E0_IS_L6470 #define E0_MICROSTEPS 16 //number of microsteps - #define E0_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define E0_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define E0_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define E0_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define E1_IS_L6470 #define E1_MICROSTEPS 16 //number of microsteps - #define E1_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define E1_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define E1_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define E1_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define E2_IS_L6470 #define E2_MICROSTEPS 16 //number of microsteps - #define E2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define E2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define E2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define E2_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define E3_IS_L6470 #define E3_MICROSTEPS 16 //number of microsteps - #define E3_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define E3_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define E3_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define E3_STALLCURRENT 1500 //current in mA where the driver will detect a stall diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration.h b/Marlin/example_configurations/delta/kossel_pro/Configuration.h index 824c6c9d7a..f6bdcebec9 100644 --- a/Marlin/example_configurations/delta/kossel_pro/Configuration.h +++ b/Marlin/example_configurations/delta/kossel_pro/Configuration.h @@ -474,7 +474,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l // This mode is preferred because there are more measurements. // // - "3-point" mode - // Probe 3 arbitrary points on the bed (that aren't colinear) + // Probe 3 arbitrary points on the bed (that aren't collinear) // You specify the XY coordinates of all 3 points. // Enable this to sample the bed in a grid (least squares solution). @@ -871,7 +871,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l // @section extras -// Increase the FAN pwm frequency. Removes the PWM noise but increases heating in the FET/Arduino +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino //#define FAST_PWM_FAN // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency @@ -959,7 +959,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l #define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 //Enter the diameter (in mm) of the filament generally used (3.0 mm or 1.75 mm) - this is then used in the slicer software. Used for sensor reading validation #define MEASURED_UPPER_LIMIT 3.30 //upper limit factor used for sensor reading validation in mm #define MEASURED_LOWER_LIMIT 1.90 //lower limit factor for sensor reading validation in mm -#define MAX_MEASUREMENT_DELAY 20 //delay buffer size in bytes (1 byte = 1cm)- limits maximum measurement delay allowable (must be larger than MEASUREMENT_DELAY_CM and lower number saves RAM) +#define MAX_MEASUREMENT_DELAY 20 //delay buffer size in bytes (1 byte = 1cm) - limits maximum measurement delay allowable (must be larger than MEASUREMENT_DELAY_CM and lower number saves RAM) //defines used in the code #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA //set measured to nominal initially diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h index 43caf311a0..d8aa176c77 100644 --- a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h +++ b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h @@ -463,7 +463,7 @@ const unsigned int dropsegments = 5; //everything with less than this number of /******************************************************************************\ * enable this section if you have TMC26X motor drivers. - * you need to import the TMC26XStepper library into the arduino IDE for this + * you need to import the TMC26XStepper library into the Arduino IDE for this ******************************************************************************/ // @section tmc @@ -525,7 +525,7 @@ const unsigned int dropsegments = 5; //everything with less than this number of /******************************************************************************\ * enable this section if you have L6470 motor drivers. - * you need to import the L6470 library into the arduino IDE for this + * you need to import the L6470 library into the Arduino IDE for this ******************************************************************************/ // @section l6470 @@ -535,61 +535,61 @@ const unsigned int dropsegments = 5; //everything with less than this number of //#define X_IS_L6470 #define X_MICROSTEPS 16 //number of microsteps - #define X_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define X_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define X_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define X_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define X2_IS_L6470 #define X2_MICROSTEPS 16 //number of microsteps - #define X2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define X2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define X2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define X2_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define Y_IS_L6470 #define Y_MICROSTEPS 16 //number of microsteps - #define Y_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define Y_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define Y_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define Y_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define Y2_IS_L6470 #define Y2_MICROSTEPS 16 //number of microsteps - #define Y2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define Y2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define Y2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define Y2_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define Z_IS_L6470 #define Z_MICROSTEPS 16 //number of microsteps - #define Z_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define Z_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define Z_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define Z_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define Z2_IS_L6470 #define Z2_MICROSTEPS 16 //number of microsteps - #define Z2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define Z2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define Z2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define Z2_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define E0_IS_L6470 #define E0_MICROSTEPS 16 //number of microsteps - #define E0_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define E0_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define E0_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define E0_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define E1_IS_L6470 #define E1_MICROSTEPS 16 //number of microsteps - #define E1_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define E1_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define E1_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define E1_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define E2_IS_L6470 #define E2_MICROSTEPS 16 //number of microsteps - #define E2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define E2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define E2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define E2_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define E3_IS_L6470 #define E3_MICROSTEPS 16 //number of microsteps - #define E3_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define E3_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define E3_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define E3_STALLCURRENT 1500 //current in mA where the driver will detect a stall diff --git a/Marlin/example_configurations/delta/kossel_xl/Configuration.h b/Marlin/example_configurations/delta/kossel_xl/Configuration.h index 095fa1b38c..ead4199a47 100644 --- a/Marlin/example_configurations/delta/kossel_xl/Configuration.h +++ b/Marlin/example_configurations/delta/kossel_xl/Configuration.h @@ -281,13 +281,13 @@ Here are some standard links for getting your machine calibrated: #define PID_BED_INTEGRAL_DRIVE_MAX MAX_BED_POWER //limit for the integral term - //120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) #define DEFAULT_bedKp 15.00 #define DEFAULT_bedKi .04 #define DEFAULT_bedKd 305.4 - //120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //from pidautotune //#define DEFAULT_bedKp 97.1 //#define DEFAULT_bedKi 1.41 @@ -484,7 +484,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l // This mode is preferred because there are more measurements. // // - "3-point" mode - // Probe 3 arbitrary points on the bed (that aren't colinear) + // Probe 3 arbitrary points on the bed (that aren't collinear) // You specify the XY coordinates of all 3 points. // Enable this to sample the bed in a grid (least squares solution). @@ -793,7 +793,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l // @section extras -// Increase the FAN pwm frequency. Removes the PWM noise but increases heating in the FET/Arduino +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino //#define FAST_PWM_FAN // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency @@ -881,7 +881,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l #define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 //Enter the diameter (in mm) of the filament generally used (3.0 mm or 1.75 mm) - this is then used in the slicer software. Used for sensor reading validation #define MEASURED_UPPER_LIMIT 2.00 //upper limit factor used for sensor reading validation in mm #define MEASURED_LOWER_LIMIT 1.60 //lower limit factor for sensor reading validation in mm -#define MAX_MEASUREMENT_DELAY 20 //delay buffer size in bytes (1 byte = 1cm)- limits maximum measurement delay allowable (must be larger than MEASUREMENT_DELAY_CM and lower number saves RAM) +#define MAX_MEASUREMENT_DELAY 20 //delay buffer size in bytes (1 byte = 1cm) - limits maximum measurement delay allowable (must be larger than MEASUREMENT_DELAY_CM and lower number saves RAM) //defines used in the code #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA //set measured to nominal initially diff --git a/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h index ca83e3175e..3ef1616aca 100644 --- a/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h +++ b/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h @@ -462,7 +462,7 @@ const unsigned int dropsegments = 5; //everything with less than this number of /******************************************************************************\ * enable this section if you have TMC26X motor drivers. - * you need to import the TMC26XStepper library into the arduino IDE for this + * you need to import the TMC26XStepper library into the Arduino IDE for this ******************************************************************************/ // @section tmc @@ -524,7 +524,7 @@ const unsigned int dropsegments = 5; //everything with less than this number of /******************************************************************************\ * enable this section if you have L6470 motor drivers. - * you need to import the L6470 library into the arduino IDE for this + * you need to import the L6470 library into the Arduino IDE for this ******************************************************************************/ // @section l6470 @@ -534,61 +534,61 @@ const unsigned int dropsegments = 5; //everything with less than this number of //#define X_IS_L6470 #define X_MICROSTEPS 16 //number of microsteps - #define X_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define X_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define X_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define X_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define X2_IS_L6470 #define X2_MICROSTEPS 16 //number of microsteps - #define X2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define X2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define X2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define X2_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define Y_IS_L6470 #define Y_MICROSTEPS 16 //number of microsteps - #define Y_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define Y_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define Y_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define Y_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define Y2_IS_L6470 #define Y2_MICROSTEPS 16 //number of microsteps - #define Y2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define Y2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define Y2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define Y2_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define Z_IS_L6470 #define Z_MICROSTEPS 16 //number of microsteps - #define Z_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define Z_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define Z_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define Z_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define Z2_IS_L6470 #define Z2_MICROSTEPS 16 //number of microsteps - #define Z2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define Z2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define Z2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define Z2_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define E0_IS_L6470 #define E0_MICROSTEPS 16 //number of microsteps - #define E0_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define E0_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define E0_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define E0_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define E1_IS_L6470 #define E1_MICROSTEPS 16 //number of microsteps - #define E1_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define E1_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define E1_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define E1_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define E2_IS_L6470 #define E2_MICROSTEPS 16 //number of microsteps - #define E2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define E2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define E2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define E2_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define E3_IS_L6470 #define E3_MICROSTEPS 16 //number of microsteps - #define E3_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define E3_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define E3_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define E3_STALLCURRENT 1500 //current in mA where the driver will detect a stall diff --git a/Marlin/example_configurations/makibox/Configuration.h b/Marlin/example_configurations/makibox/Configuration.h index 317e93dea3..15b1606c36 100644 --- a/Marlin/example_configurations/makibox/Configuration.h +++ b/Marlin/example_configurations/makibox/Configuration.h @@ -251,13 +251,13 @@ Here are some standard links for getting your machine calibrated: #define PID_BED_INTEGRAL_DRIVE_MAX MAX_BED_POWER //limit for the integral term - //120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) #define DEFAULT_bedKp 10.00 #define DEFAULT_bedKi .023 #define DEFAULT_bedKd 305.4 - //120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //from pidautotune //#define DEFAULT_bedKp 97.1 //#define DEFAULT_bedKi 1.41 @@ -454,7 +454,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l // This mode is preferred because there are more measurements. // // - "3-point" mode - // Probe 3 arbitrary points on the bed (that aren't colinear) + // Probe 3 arbitrary points on the bed (that aren't collinear) // You specify the XY coordinates of all 3 points. // Enable this to sample the bed in a grid (least squares solution). @@ -753,7 +753,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l // @section extras -// Increase the FAN pwm frequency. Removes the PWM noise but increases heating in the FET/Arduino +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino //#define FAST_PWM_FAN // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency @@ -841,7 +841,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l #define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 //Enter the diameter (in mm) of the filament generally used (3.0 mm or 1.75 mm) - this is then used in the slicer software. Used for sensor reading validation #define MEASURED_UPPER_LIMIT 3.30 //upper limit factor used for sensor reading validation in mm #define MEASURED_LOWER_LIMIT 1.90 //lower limit factor for sensor reading validation in mm -#define MAX_MEASUREMENT_DELAY 20 //delay buffer size in bytes (1 byte = 1cm)- limits maximum measurement delay allowable (must be larger than MEASUREMENT_DELAY_CM and lower number saves RAM) +#define MAX_MEASUREMENT_DELAY 20 //delay buffer size in bytes (1 byte = 1cm) - limits maximum measurement delay allowable (must be larger than MEASUREMENT_DELAY_CM and lower number saves RAM) //defines used in the code #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA //set measured to nominal initially diff --git a/Marlin/example_configurations/makibox/Configuration_adv.h b/Marlin/example_configurations/makibox/Configuration_adv.h index b470e29044..f401df23a4 100644 --- a/Marlin/example_configurations/makibox/Configuration_adv.h +++ b/Marlin/example_configurations/makibox/Configuration_adv.h @@ -457,7 +457,7 @@ const unsigned int dropsegments = 5; //everything with less than this number of /******************************************************************************\ * enable this section if you have TMC26X motor drivers. - * you need to import the TMC26XStepper library into the arduino IDE for this + * you need to import the TMC26XStepper library into the Arduino IDE for this ******************************************************************************/ // @section tmc @@ -519,7 +519,7 @@ const unsigned int dropsegments = 5; //everything with less than this number of /******************************************************************************\ * enable this section if you have L6470 motor drivers. - * you need to import the L6470 library into the arduino IDE for this + * you need to import the L6470 library into the Arduino IDE for this ******************************************************************************/ // @section l6470 @@ -529,61 +529,61 @@ const unsigned int dropsegments = 5; //everything with less than this number of //#define X_IS_L6470 #define X_MICROSTEPS 16 //number of microsteps - #define X_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define X_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define X_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define X_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define X2_IS_L6470 #define X2_MICROSTEPS 16 //number of microsteps - #define X2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define X2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define X2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define X2_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define Y_IS_L6470 #define Y_MICROSTEPS 16 //number of microsteps - #define Y_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define Y_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define Y_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define Y_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define Y2_IS_L6470 #define Y2_MICROSTEPS 16 //number of microsteps - #define Y2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define Y2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define Y2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define Y2_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define Z_IS_L6470 #define Z_MICROSTEPS 16 //number of microsteps - #define Z_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define Z_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define Z_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define Z_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define Z2_IS_L6470 #define Z2_MICROSTEPS 16 //number of microsteps - #define Z2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define Z2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define Z2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define Z2_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define E0_IS_L6470 #define E0_MICROSTEPS 16 //number of microsteps - #define E0_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define E0_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define E0_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define E0_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define E1_IS_L6470 #define E1_MICROSTEPS 16 //number of microsteps - #define E1_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define E1_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define E1_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define E1_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define E2_IS_L6470 #define E2_MICROSTEPS 16 //number of microsteps - #define E2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define E2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define E2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define E2_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define E3_IS_L6470 #define E3_MICROSTEPS 16 //number of microsteps - #define E3_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define E3_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define E3_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define E3_STALLCURRENT 1500 //current in mA where the driver will detect a stall diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration.h b/Marlin/example_configurations/tvrrug/Round2/Configuration.h index ffd058a754..f2bbfead77 100644 --- a/Marlin/example_configurations/tvrrug/Round2/Configuration.h +++ b/Marlin/example_configurations/tvrrug/Round2/Configuration.h @@ -238,13 +238,13 @@ Here are some standard links for getting your machine calibrated: #define PID_BED_INTEGRAL_DRIVE_MAX MAX_BED_POWER //limit for the integral term - //120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) #define DEFAULT_bedKp 10.00 #define DEFAULT_bedKi .023 #define DEFAULT_bedKd 305.4 - //120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //from pidautotune //#define DEFAULT_bedKp 97.1 //#define DEFAULT_bedKi 1.41 @@ -442,7 +442,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo // This mode is preferred because there are more measurements. // // - "3-point" mode - // Probe 3 arbitrary points on the bed (that aren't colinear) + // Probe 3 arbitrary points on the bed (that aren't collinear) // You specify the XY coordinates of all 3 points. // Enable this to sample the bed in a grid (least squares solution). @@ -745,7 +745,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo // @section extras -// Increase the FAN pwm frequency. Removes the PWM noise but increases heating in the FET/Arduino +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino //#define FAST_PWM_FAN // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency @@ -833,7 +833,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo #define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 //Enter the diameter (in mm) of the filament generally used (3.0 mm or 1.75 mm) - this is then used in the slicer software. Used for sensor reading validation #define MEASURED_UPPER_LIMIT 3.30 //upper limit factor used for sensor reading validation in mm #define MEASURED_LOWER_LIMIT 1.90 //lower limit factor for sensor reading validation in mm -#define MAX_MEASUREMENT_DELAY 20 //delay buffer size in bytes (1 byte = 1cm)- limits maximum measurement delay allowable (must be larger than MEASUREMENT_DELAY_CM and lower number saves RAM) +#define MAX_MEASUREMENT_DELAY 20 //delay buffer size in bytes (1 byte = 1cm) - limits maximum measurement delay allowable (must be larger than MEASUREMENT_DELAY_CM and lower number saves RAM) //defines used in the code #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA //set measured to nominal initially diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h index 2353fc7ac4..b91c214490 100644 --- a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h +++ b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h @@ -458,7 +458,7 @@ const unsigned int dropsegments = 5; //everything with less than this number of /******************************************************************************\ * enable this section if you have TMC26X motor drivers. - * you need to import the TMC26XStepper library into the arduino IDE for this + * you need to import the TMC26XStepper library into the Arduino IDE for this ******************************************************************************/ // @section tmc @@ -520,7 +520,7 @@ const unsigned int dropsegments = 5; //everything with less than this number of /******************************************************************************\ * enable this section if you have L6470 motor drivers. - * you need to import the L6470 library into the arduino IDE for this + * you need to import the L6470 library into the Arduino IDE for this ******************************************************************************/ // @section l6470 @@ -530,61 +530,61 @@ const unsigned int dropsegments = 5; //everything with less than this number of //#define X_IS_L6470 #define X_MICROSTEPS 16 //number of microsteps - #define X_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define X_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define X_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define X_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define X2_IS_L6470 #define X2_MICROSTEPS 16 //number of microsteps - #define X2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define X2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define X2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define X2_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define Y_IS_L6470 #define Y_MICROSTEPS 16 //number of microsteps - #define Y_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define Y_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define Y_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define Y_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define Y2_IS_L6470 #define Y2_MICROSTEPS 16 //number of microsteps - #define Y2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define Y2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define Y2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define Y2_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define Z_IS_L6470 #define Z_MICROSTEPS 16 //number of microsteps - #define Z_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define Z_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define Z_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define Z_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define Z2_IS_L6470 #define Z2_MICROSTEPS 16 //number of microsteps - #define Z2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define Z2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define Z2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define Z2_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define E0_IS_L6470 #define E0_MICROSTEPS 16 //number of microsteps - #define E0_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define E0_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define E0_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define E0_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define E1_IS_L6470 #define E1_MICROSTEPS 16 //number of microsteps - #define E1_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define E1_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define E1_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define E1_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define E2_IS_L6470 #define E2_MICROSTEPS 16 //number of microsteps - #define E2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define E2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define E2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define E2_STALLCURRENT 1500 //current in mA where the driver will detect a stall //#define E3_IS_L6470 #define E3_MICROSTEPS 16 //number of microsteps - #define E3_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high + #define E3_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define E3_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off #define E3_STALLCURRENT 1500 //current in mA where the driver will detect a stall diff --git a/Marlin/language_cn.h b/Marlin/language_cn.h index 16ccc1679d..3485067cc5 100644 --- a/Marlin/language_cn.h +++ b/Marlin/language_cn.h @@ -8,7 +8,7 @@ #ifndef LANGUAGE_CN_H #define LANGUAGE_CN_H -#define MAPPER_NON // For direct asci codes +#define MAPPER_NON // For direct ascii codes #define DISPLAY_CHARSET_ISO10646_CN #define WELCOME_MSG "\xa4\xa5\xa6\xa7" diff --git a/Marlin/language_en.h b/Marlin/language_en.h index 361cf8a2c0..bc259c96bf 100644 --- a/Marlin/language_en.h +++ b/Marlin/language_en.h @@ -9,7 +9,7 @@ #define LANGUAGE_EN_H #if DISABLED(MAPPER_NON) && DISABLED(MAPPER_C2C3) && DISABLED(MAPPER_D0D1) && DISABLED(MAPPER_D0D1_MOD) && DISABLED(MAPPER_E382E383) - #define MAPPER_NON // For direct asci codes + #define MAPPER_NON // For direct ascii codes #endif //#define SIMULATE_ROMFONT //Comment in to see what is seen on the character based displays diff --git a/Marlin/language_test.h b/Marlin/language_test.h index 0135a5d957..be9e6c063a 100644 --- a/Marlin/language_test.h +++ b/Marlin/language_test.h @@ -25,7 +25,7 @@ // impossible to have a close to direct mapping but will need giant conversion tables and fonts (we don't want to have in a embedded system). -#define MAPPER_NON // For direct asci codes ( until now all languages except ru, de, fi, kana_utf8, ... ) +#define MAPPER_NON // For direct ascii codes ( until now all languages except ru, de, fi, kana_utf8, ... ) //#define MAPPER_C2C3 // For most European languages when language file is in utf8 //#define MAPPER_D0D1 // For Cyrillic //#define MAPPER_E382E383 // For Katakana diff --git a/Marlin/planner.cpp b/Marlin/planner.cpp index 7f54c8950c..afe2f43f82 100644 --- a/Marlin/planner.cpp +++ b/Marlin/planner.cpp @@ -892,7 +892,7 @@ float junction_deviation = 0.1; // Compute maximum allowable entry speed at junction by centripetal acceleration approximation. // Let a circle be tangent to both previous and current path line segments, where the junction // deviation is defined as the distance from the junction to the closest edge of the circle, - // colinear with the circle center. The circular segment joining the two paths represents the + // collinear with the circle center. The circular segment joining the two paths represents the // path of centripetal acceleration. Solve for max velocity based on max acceleration about the // radius of the circle, defined indirectly by junction deviation. This may be also viewed as // path width or max_jerk in the previous grbl version. This approach does not actually deviate