MPCNC/Firmware2
1
0
Fork 0
Code Issues 1 Pull Requests Releases Wiki Activity

🎨 Format, use status macros

Browse Source
This commit is contained in:
Scott Lahteine 2022-03-25 17:09:55 -05:00 committed by Scott Lahteine
parent 5632ad65f5
commit 9324132a40
11 changed files with 29 additions and 31 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

10
Marlin/Configuration_adv.h
View File

@ -1339,13 +1339,13 @@
#endif
#if EITHER(HAS_DISPLAY, DWIN_LCD_PROUI)
// The timeout (in ms) to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000
// The timeout to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000 // (ms)
#if ENABLED(SHOW_BOOTSCREEN)
#define BOOTSCREEN_TIMEOUT 4000 // (ms) Total Duration to display the boot screen(s)
#define BOOTSCREEN_TIMEOUT 4000 // (ms) Total Duration to display the boot screen(s)
#if EITHER(HAS_MARLINUI_U8GLIB, TFT_COLOR_UI)
#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving lots of flash)
#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving lots of flash)
#endif
#endif
@ -3464,7 +3464,7 @@
#define SPINDLE_LASER_USE_PWM // Enable if your controller supports setting the speed/power
#if ENABLED(SPINDLE_LASER_USE_PWM)
#define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32 and LPC)
#define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC)
#endif
//#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11

2
Marlin/src/gcode/lcd/M117.cpp
View File

@ -33,7 +33,7 @@
void GcodeSuite::M117() {
if (parser.string_arg && parser.string_arg[0])
ui.set_status(parser.string_arg);
ui.set_status(parser.string_arg, true);
else
ui.reset_status();

5
Marlin/src/gcode/temp/M140_M190.cpp
View File

@ -82,10 +82,9 @@ void GcodeSuite::M140_M190(const bool isM190) {
if (!got_temp) return;
thermalManager.setTargetBed(temp);
thermalManager.isHeatingBed() ? LCD_MESSAGE(MSG_BED_HEATING) : LCD_MESSAGE(MSG_BED_COOLING);
ui.set_status(thermalManager.isHeatingBed() ? GET_TEXT_F(MSG_BED_HEATING) : GET_TEXT_F(MSG_BED_COOLING));
// with PRINTJOB_TIMER_AUTOSTART, M190 can start the timer, and M140 can stop it
// With PRINTJOB_TIMER_AUTOSTART, M190 can start the timer, and M140 can stop it
TERN_(PRINTJOB_TIMER_AUTOSTART, thermalManager.auto_job_check_timer(isM190, !isM190));
if (isM190)

2
Marlin/src/gcode/temp/M192.cpp
View File

@ -49,7 +49,7 @@ void GcodeSuite::M192() {
}
const celsius_t target_temp = parser.value_celsius();
ui.set_status(thermalManager.isProbeBelowTemp(target_temp) ? GET_TEXT_F(MSG_PROBE_HEATING) : GET_TEXT_F(MSG_PROBE_COOLING));
thermalManager.isProbeBelowTemp(target_temp) ? LCD_MESSAGE(MSG_PROBE_HEATING) : LCD_MESSAGE(MSG_PROBE_COOLING);
thermalManager.wait_for_probe(target_temp, no_wait_for_cooling);
}

4
Marlin/src/lcd/e3v2/proui/dwin.cpp
View File

@ -2304,7 +2304,7 @@ TERN(HAS_ONESTEP_LEVELING, float, void) Tram(uint8_t point) {
inLev = true;
zval = probe.probe_at_point(xpos, ypos, PROBE_PT_STOW);
if (isnan(zval))
ui.set_status(F("Position Not Reachable, check offsets"));
LCD_MESSAGE_F("Position Not Reachable, check offsets");
else {
sprintf_P(cmd, PSTR("X:%s, Y:%s, Z:%s"),
dtostrf(xpos, 1, 1, str_1),
@ -2336,7 +2336,7 @@ void TramC () { Tram(4); }
void Trammingwizard() {
bed_mesh_t zval = {0};
if (HMI_data.FullManualTramming) {
ui.set_status(F("Disable manual tramming"));
LCD_MESSAGE_F("Disable manual tramming");
return;
}
zval[0][0] = Tram(0);

14
Marlin/src/lcd/marlinui.cpp
View File

@ -593,7 +593,7 @@ void MarlinUI::init() {
// share the same line on the display.
//
#if DISABLED(PROGRESS_MSG_ONCE) || (PROGRESS_MSG_EXPIRE > 0)
#if DISABLED(PROGRESS_MSG_ONCE) || PROGRESS_MSG_EXPIRE > 0
#define GOT_MS
const millis_t ms = millis();
#endif
@ -1420,6 +1420,7 @@ void MarlinUI::init() {
#if SERVICE_INTERVAL_3 > 0
static PGMSTR(service3, "> " SERVICE_NAME_3 "!");
#endif
FSTR_P msg;
if (printingIsPaused())
msg = GET_TEXT_F(MSG_PRINT_PAUSED);
@ -1450,13 +1451,18 @@ void MarlinUI::init() {
set_status(msg, -1);
}
/**
* Set Status with a fixed string and alert level.
* @param fstr A constant F-string to set as the status.
* @param level Alert level. Negative to ignore and reset the level. Non-zero never expires.
*/
void MarlinUI::set_status(FSTR_P const fstr, int8_t level) {
PGM_P const pstr = FTOP(fstr);
// Alerts block lower priority messages
if (level < 0) level = alert_level = 0;
if (level < alert_level) return;
alert_level = level;
TERN_(HOST_STATUS_NOTIFICATIONS, hostui.notify(fstr));
PGM_P const pstr = FTOP(fstr);
// Since the message is encoded in UTF8 it must
// only be cut on a character boundary.
@ -1476,6 +1482,8 @@ void MarlinUI::init() {
strncpy_P(status_message, pstr, maxLen);
status_message[maxLen] = '\0';
TERN_(HOST_STATUS_NOTIFICATIONS, hostui.notify(fstr));
finish_status(level > 0);
}

4
Marlin/src/lcd/marlinui.h
View File

@ -39,10 +39,6 @@
#define HAS_ENCODER_ACTION 1
#endif
#if HAS_STATUS_MESSAGE
#define START_OF_UTF8_CHAR(C) (((C) & 0xC0u) != 0x80U)
#endif
#if E_MANUAL > 1
#define MULTI_E_MANUAL 1
#endif

9
Marlin/src/module/motion.cpp
View File

@ -29,9 +29,8 @@
#include "stepper.h"
#include "planner.h"
#include "temperature.h"
#include "../gcode/gcode.h"
#include "../lcd/marlinui.h"
#include "../inc/MarlinConfig.h"
#if IS_SCARA
@ -51,10 +50,6 @@
#include "../feature/bltouch.h"
#endif
#if HAS_STATUS_MESSAGE
#include "../lcd/marlinui.h"
#endif
#if HAS_FILAMENT_SENSOR
#include "../feature/runout.h"
#endif
@ -1325,7 +1320,7 @@ void prepare_line_to_destination() {
);
SERIAL_ECHO_START();
SERIAL_ECHOLN(msg);
TERN_(HAS_STATUS_MESSAGE, ui.set_status(msg));
ui.set_status(msg);
return true;
}
return false;

6
Marlin/src/module/probe.cpp
View File

@ -313,9 +313,9 @@ FORCE_INLINE void probe_specific_action(const bool deploy) {
ui.set_status(ds_str, 99);
SERIAL_ECHOLNF(deploy ? GET_EN_TEXT_F(MSG_MANUAL_DEPLOY) : GET_EN_TEXT_F(MSG_MANUAL_STOW));
TERN_(HOST_PROMPT_SUPPORT, hostui.prompt_do(PROMPT_USER_CONTINUE, F("Stow Probe"), FPSTR(CONTINUE_STR)));
TERN_(EXTENSIBLE_UI, ExtUI::onUserConfirmRequired(F("Stow Probe")));
TERN_(DWIN_LCD_PROUI, DWIN_Popup_Confirm(ICON_BLTouch, F("Stow Probe"), FPSTR(CONTINUE_STR)));
TERN_(HOST_PROMPT_SUPPORT, hostui.prompt_do(PROMPT_USER_CONTINUE, ds_str, FPSTR(CONTINUE_STR)));
TERN_(EXTENSIBLE_UI, ExtUI::onUserConfirmRequired(ds_str));
TERN_(DWIN_LCD_PROUI, DWIN_Popup_Confirm(ICON_BLTouch, ds_str, FPSTR(CONTINUE_STR)));
TERN_(HAS_RESUME_CONTINUE, wait_for_user_response());
ui.reset_status();

2
Marlin/src/module/temperature.cpp
View File

@ -651,7 +651,7 @@ volatile bool Temperature::raw_temps_ready = false;
// PID Tuning loop
wait_for_heatup = true; // Can be interrupted with M108
TERN_(HAS_STATUS_MESSAGE, ui.set_status(F("Wait for heat up...")));
LCD_MESSAGE(MSG_HEATING);
while (wait_for_heatup) {
const millis_t ms = millis();

2
Marlin/src/sd/cardreader.cpp
View File

@ -458,7 +458,7 @@ void CardReader::mount() {
cdroot();
#if ENABLED(USB_FLASH_DRIVE_SUPPORT) || PIN_EXISTS(SD_DETECT)
else if (marlin_state != MF_INITIALIZING)
ui.set_status(GET_TEXT_F(MSG_MEDIA_INIT_FAIL), -1);
LCD_ALERTMESSAGE(MSG_MEDIA_INIT_FAIL);
#endif
ui.refresh();