[2.0.x] Add support for Cohesion3D ReMix and Mini (#9512)

* Add support for Cohesion3D ReMix and Mini
* Two separate pins files for pedantic reasons
This commit is contained in:
Thomas Moore 2018-02-08 03:14:39 -06:00 committed by Scott Lahteine
parent 852468ead7
commit 93af0365e8
4 changed files with 371 additions and 0 deletions

View File

@ -163,6 +163,8 @@
#define BOARD_AZTEEG_X5_GT 1752 // Azteeg X5 GT (Power outputs: Hotend0, Hotend1, Bed, Fan)
#define BOARD_BIQU_BQ111_A4 1753 // BIQU BQ111-A4 (Power outputs: Hotend, Fan, Bed)
#define BOARD_SELENA_COMPACT 1754 // Selena Compact (Power outputs: Hotend0, Hotend1, Bed0, Bed1, Fan0, Fan1)
#define BOARD_COHESION3D_REMIX 1755 // Cohesion3D ReMix
#define BOARD_COHESION3D_MINI 1756 // Cohesion3D Mini
//
// SAM3X8E ARM Cortex M3

View File

@ -343,6 +343,10 @@
#include "pins_THE_BORG.h"
#elif MB(SELENA_COMPACT)
#include "pins_SELENA_COMPACT.h"
#elif MB(COHESION3D_REMIX)
#include "pins_COHESION3D_REMIX.h"
#elif MB(COHESION3D_MINI)
#include "pins_COHESION3D_MINI.h"
#else
#error "Unknown MOTHERBOARD value set in Configuration.h"
#endif

View File

@ -0,0 +1,171 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* Copyright (C) 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Cohesion3D Mini pin assignments
*/
#ifndef TARGET_LPC1768
#error "Oops! Make sure you have LPC1768 selected."
#endif
#ifndef BOARD_NAME
#define BOARD_NAME "Cohesion3D Mini"
#endif
//
// Servos
//
#define SERVO0_PIN P1_23
//
// Limit Switches
//
#define X_MIN_PIN P1_24 // 10k pullup to 3.3V
#define X_MAX_PIN P1_25 // 10k pullup to 3.3V
#define Y_MIN_PIN P1_26 // 10k pullup to 3.3V
#define Y_MAX_PIN P1_27 // 10k pullup to 3.3V
#define Z_MIN_PIN P1_28 // 10k pullup to 3.3V
#define Z_MAX_PIN P1_29 // 10k pullup to 3.3V
//
// Steppers
//
#define X_STEP_PIN P2_00
#define X_DIR_PIN P0_05
#define X_ENABLE_PIN P0_04
#define X_CS_PIN P1_10 // Ethernet Expansion - Pin 9
#define Y_STEP_PIN P2_01
#define Y_DIR_PIN P0_11
#define Y_ENABLE_PIN P0_10
#define Y_CS_PIN P1_09 // Ethernet Expansion - Pin 10
#define Z_STEP_PIN P2_02
#define Z_DIR_PIN P0_20
#define Z_ENABLE_PIN P0_19
#define Z_CS_PIN P1_00 // Ethernet Expansion - Pin 11
#define E0_STEP_PIN P2_03
#define E0_DIR_PIN P0_22
#define E0_ENABLE_PIN P0_21
#define E0_CS_PIN P1_04 // Ethernet Expansion - Pin 12
//
// Default pins for TMC software SPI
//
#if ENABLED(TMC_USE_SW_SPI)
#ifndef TMC_SW_MOSI
#define TMC_SW_MOSI P1_16 // Ethernet Expansion - Pin 5
#endif
#ifndef TMC_SW_MISO
#define TMC_SW_MISO P1_17 // Ethernet Expansion - Pin 6
#endif
#ifndef TMC_SW_SCK
#define TMC_SW_SCK P1_08 // Ethernet Expansion - Pin 7
#endif
#endif
//
// Analog Inputs
// 3.3V max when defined as an analog input
//
#define TEMP_0_PIN 0 // P0_23
#define TEMP_BED_PIN 1 // P0_24
//
// Heaters / Fans
//
#define HEATER_BED_PIN P2_05
#define HEATER_0_PIN P2_07 // FET 1
#define AUTO_FAN_PIN P2_04 // FET 4
#define FAN_PIN P2_06 // ReMix FET 4, Mini FET 3
//
// Auto fans
//
#define ORIG_E0_AUTO_FAN_PIN AUTO_FAN_PIN
#define ORIG_E1_AUTO_FAN_PIN AUTO_FAN_PIN
#define ORIG_E2_AUTO_FAN_PIN AUTO_FAN_PIN
//
// Misc. Functions
//
#define LED_PIN P4_28 // Play LED
//
// M3/M4/M5 - Spindle/Laser Control
//
#if ENABLED(SPINDLE_LASER_ENABLE)
#undef HEATER_0_PIN
#define SPINDLE_LASER_ENABLE_PIN P2_07 // FET 1
#undef HEATER_BED_PIN
#define SPINDLE_LASER_PWM_PIN P2_05 // Bed FET
#undef FAN_PIN
#define SPINDLE_DIR_PIN P2_06 // ReMix FET 4, Mini FET 3
#endif
//
// LCD / Controller
//
// LCD_PINS_D5, D6, and D7 are not present in the EXP1 connector, and will need to be
// defined to use the REPRAP_DISCOUNT_SMART_CONTROLLER.
//
// A remote SD card is currently not supported because the pins routed to the EXP2
// connector are shared with the onboard SD card, and Marlin does not support reading
// G-code files from the onboard SD card.
//
#if ENABLED(ULTRA_LCD)
#define BEEPER_PIN P0_27 // EXP2-7 - open drain
#define BTN_EN1 P3_26 // EXP2-5
#define BTN_EN2 P3_25 // EXP2-3
#define BTN_ENC P1_30 // EXP1-2
#define LCD_PINS_RS P0_16 // EXP1-4
#define LCD_SDSS P0_28 // EXP2-4
#define LCD_PINS_ENABLE P0_18 // EXP1-3
#define LCD_PINS_D4 P0_15 // EXP1-5
#define KILL_PIN P2_11 // EXP2-10
#if ENABLED(SDSUPPORT)
#error "SDSUPPORT is not currently supported by the Cohesion3D boards"
#endif
#endif // ULTRA_LCD
//
// Ethernet pins
//
#define ENET_MDIO P1_17
#define ENET_RX_ER P1_14
#define ENET_RXD1 P1_10
#define ENET_MOC P1_16
#define REF_CLK P1_15
#define ENET_RXD0 P1_09
#define ENET_CRS P1_08
#define ENET_TX_EN P1_04
#define ENET_TXD0 P1_00
#define ENET_TXD1 P1_01

View File

@ -0,0 +1,194 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* Copyright (C) 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Cohesion3D ReMix pin assignments
*/
#ifndef TARGET_LPC1768
#error "Oops! Make sure you have LPC1768 selected."
#endif
#ifndef BOARD_NAME
#define BOARD_NAME "Cohesion3D ReMix"
#endif
//
// Servos
//
#define SERVO0_PIN P2_04
//
// Limit Switches
//
#define X_MIN_PIN P1_24 // 10k pullup to 3.3V
#define X_MAX_PIN P1_25 // 10k pullup to 3.3V
#define Y_MIN_PIN P1_26 // 10k pullup to 3.3V
#define Y_MAX_PIN P1_27 // 10k pullup to 3.3V
#define Z_MIN_PIN P1_28 // 10k pullup to 3.3V
#define Z_MAX_PIN P1_29 // 10k pullup to 3.3V
//
// Steppers
//
#define X_STEP_PIN P2_00
#define X_DIR_PIN P0_05
#define X_ENABLE_PIN P0_04
#define X_CS_PIN P1_10 // Ethernet Expansion - Pin 9
#define Y_STEP_PIN P2_01
#define Y_DIR_PIN P0_11
#define Y_ENABLE_PIN P0_10
#define Y_CS_PIN P1_09 // Ethernet Expansion - Pin 10
#define Z_STEP_PIN P2_02
#define Z_DIR_PIN P0_20
#define Z_ENABLE_PIN P0_19
#define Z_CS_PIN P1_00 // Ethernet Expansion - Pin 11
#define E0_STEP_PIN P2_03
#define E0_DIR_PIN P0_22
#define E0_ENABLE_PIN P0_21
#define E0_CS_PIN P1_04 // Ethernet Expansion - Pin 12
#define E1_STEP_PIN P2_08
#define E1_DIR_PIN P2_13
#define E1_ENABLE_PIN P4_29
#define E1_CS_PIN P1_01 // Ethernet Expansion - Pin 14
#define E2_STEP_PIN P1_20
#define E2_DIR_PIN P1_19
#define E2_ENABLE_PIN P1_21
#define E2_CS_PIN P1_18 // FET 6
//
// Default pins for TMC software SPI
//
#if ENABLED(TMC_USE_SW_SPI)
#ifndef TMC_SW_MOSI
#define TMC_SW_MOSI P1_16 // Ethernet Expansion - Pin 5
#endif
#ifndef TMC_SW_MISO
#define TMC_SW_MISO P1_17 // Ethernet Expansion - Pin 6
#endif
#ifndef TMC_SW_SCK
#define TMC_SW_SCK P1_08 // Ethernet Expansion - Pin 7
#endif
#endif
//
// Analog Inputs
// 3.3V max when defined as an analog input
//
#define TEMP_0_PIN 0 // P0_23
#define TEMP_BED_PIN 1 // P0_24
#define TEMP_1_PIN 2 // P0_25
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#define FILWIDTH_PIN 3 // P0_26
#else
#define TEMP_2_PIN 3 // P0_26
#endif
//
// Heaters / Fans
//
#define HEATER_BED_PIN P2_05
#define HEATER_0_PIN P2_07 // FET 1
#define HEATER_1_PIN P1_23 // FET 2
#if HOTENDS == 3
#define HEATER_2_PIN P1_22 // FET 3
#define AUTO_FAN_PIN P1_18 // FET 6
#else
#define AUTO_FAN_PIN P1_22 // FET 3
#endif
#define FAN_PIN P2_06 // ReMix FET 4, Mini FET 3
//
// Auto fans
//
#define ORIG_E0_AUTO_FAN_PIN AUTO_FAN_PIN
#define ORIG_E1_AUTO_FAN_PIN AUTO_FAN_PIN
#define ORIG_E2_AUTO_FAN_PIN AUTO_FAN_PIN
//
// Misc. Functions
//
#define LED_PIN P4_28 // Play LED
//
// M3/M4/M5 - Spindle/Laser Control
//
#if ENABLED(SPINDLE_LASER_ENABLE)
#undef HEATER_0_PIN
#define SPINDLE_LASER_ENABLE_PIN P2_07 // FET 1
#undef HEATER_BED_PIN
#define SPINDLE_LASER_PWM_PIN P2_05 // Bed FET
#undef FAN_PIN
#define SPINDLE_DIR_PIN P2_06 // ReMix FET 4, Mini FET 3
#endif
//
// LCD / Controller
//
// LCD_PINS_D5, D6, and D7 are not present in the EXP1 connector, and will need to be
// defined to use the REPRAP_DISCOUNT_SMART_CONTROLLER.
//
// A remote SD card is currently not supported because the pins routed to the EXP2
// connector are shared with the onboard SD card, and Marlin does not support reading
// G-code files from the onboard SD card.
//
#if ENABLED(ULTRA_LCD)
#define BEEPER_PIN P1_31 // EXP1-1
#define SD_DETECT_PIN P0_27 // EXP2-7
#define BTN_EN1 P3_26 // EXP2-5
#define BTN_EN2 P3_25 // EXP2-3
#define BTN_ENC P1_30 // EXP1-2
#define LCD_PINS_RS P0_16 // EXP1-4
#define LCD_SDSS P0_28 // EXP2-4
#define LCD_PINS_ENABLE P0_18 // EXP1-3
#define LCD_PINS_D4 P0_15 // EXP1-5
#define KILL_PIN P2_11 // EXP2-10
#if ENABLED(SDSUPPORT)
#error "SDSUPPORT is not currently supported by the Cohesion3D boards"
#endif
#endif // ULTRA_LCD
//
// Ethernet pins
//
#define ENET_MDIO P1_17
#define ENET_RX_ER P1_14
#define ENET_RXD1 P1_10
#define ENET_MOC P1_16
#define REF_CLK P1_15
#define ENET_RXD0 P1_09
#define ENET_CRS P1_08
#define ENET_TX_EN P1_04
#define ENET_TXD0 P1_00
#define ENET_TXD1 P1_01