Extended Preheat options

Preheat LCD menus base on code by D-Base
This commit is contained in:
Dim3nsioneer 2014-03-17 18:37:46 +01:00
parent 3906f27c46
commit 944ced87c5
2 changed files with 275 additions and 41 deletions

View File

@ -77,9 +77,19 @@
#define MSG_AUTO_HOME "Auto home"
#define MSG_SET_ORIGIN "Set origin"
#define MSG_PREHEAT_PLA "Preheat PLA"
#define MSG_PREHEAT_PLA_SETTINGS "Preheat PLA conf"
#define MSG_PREHEAT_PLA0 "Preheat PLA 1"
#define MSG_PREHEAT_PLA1 "Preheat PLA 2"
#define MSG_PREHEAT_PLA2 "Preheat PLA 3"
#define MSG_PREHEAT_PLA012 "Preheat PLA All"
#define MSG_PREHEAT_PLA_BEDONLY "Preheat PLA Bed"
#define MSG_PREHEAT_PLA_SETTINGS "Preheat PLA Conf"
#define MSG_PREHEAT_ABS "Preheat ABS"
#define MSG_PREHEAT_ABS_SETTINGS "Preheat ABS conf"
#define MSG_PREHEAT_ABS0 "Preheat ABS 1"
#define MSG_PREHEAT_ABS1 "Preheat ABS 2"
#define MSG_PREHEAT_ABS2 "Preheat ABS 3"
#define MSG_PREHEAT_ABS012 "Preheat ABS All"
#define MSG_PREHEAT_ABS_BEDONLY "Preheat ABS Bed"
#define MSG_PREHEAT_ABS_SETTINGS "Preheat ABS Conf"
#define MSG_COOLDOWN "Cooldown"
#define MSG_SWITCH_PS_ON "Switch power on"
#define MSG_SWITCH_PS_OFF "Switch power off"
@ -264,9 +274,19 @@
#define MSG_AUTO_HOME "Auto. poz. zerowa"
#define MSG_SET_ORIGIN "Ustaw punkt zero"
#define MSG_PREHEAT_PLA "Rozgrzej PLA"
#define MSG_PREHEAT_PLA_SETTINGS "Ustaw. rozg. PLA"
#define MSG_PREHEAT_PLA0 "Rozgrzej PLA 1"
#define MSG_PREHEAT_PLA1 "Rozgrzej PLA 2"
#define MSG_PREHEAT_PLA2 "Rozgrzej PLA 3"
#define MSG_PREHEAT_PLA012 "Rozgrzej PLA Wszystko"
#define MSG_PREHEAT_PLA_BEDONLY "Rozgrzej PLA Loze"
#define MSG_PREHEAT_PLA_SETTINGS "Ustawienia roz. PLA"
#define MSG_PREHEAT_ABS "Rozgrzej ABS"
#define MSG_PREHEAT_ABS_SETTINGS "Ustaw. rozg. ABS"
#define MSG_PREHEAT_ABS0 "Rozgrzej ABS 1"
#define MSG_PREHEAT_ABS1 "Rozgrzej ABS 2"
#define MSG_PREHEAT_ABS2 "Rozgrzej ABS 3"
#define MSG_PREHEAT_ABS012 "Rozgrzej ABS Wszystko"
#define MSG_PREHEAT_ABS_BEDONLY "Rozgrzej ABS Loze"
#define MSG_PREHEAT_ABS_SETTINGS "Ustawienia roz. ABS"
#define MSG_COOLDOWN "Chlodzenie"
#define MSG_SWITCH_PS_ON "Wlacz zasilacz"
#define MSG_SWITCH_PS_OFF "Wylacz zasilacz"
@ -453,9 +473,19 @@
#define MSG_AUTO_HOME "Home auto."
#define MSG_SET_ORIGIN "Regler origine"
#define MSG_PREHEAT_PLA " Prechauffage PLA"
#define MSG_PREHEAT_PLA_SETTINGS " Regl. prech. PLA"
#define MSG_PREHEAT_PLA0 "Prechauffage PLA 1"
#define MSG_PREHEAT_PLA1 "Prechauffage PLA 2"
#define MSG_PREHEAT_PLA2 "Prechauffage PLA 3"
#define MSG_PREHEAT_PLA012 "Prechauffage PLA Tout"
#define MSG_PREHEAT_PLA_BEDONLY "Prechauffage PLA Plateau"
#define MSG_PREHEAT_PLA_SETTINGS " Regl. prechauffe PLA"
#define MSG_PREHEAT_ABS "Prechauffage ABS"
#define MSG_PREHEAT_ABS_SETTINGS "Regl. prech. ABS"
#define MSG_PREHEAT_ABS0 "Prechauffage ABS 1"
#define MSG_PREHEAT_ABS1 "Prechauffage ABS 2"
#define MSG_PREHEAT_ABS2 "Prechauffage ABS 3"
#define MSG_PREHEAT_ABS012 "Prechauffage ABS Tout"
#define MSG_PREHEAT_ABS_BEDONLY "Prechauffage ABS Plateau"
#define MSG_PREHEAT_ABS_SETTINGS "Regl. prechauffe ABS"
#define MSG_COOLDOWN "Refroidir"
#define MSG_SWITCH_PS_ON "Allumer alim."
#define MSG_SWITCH_PS_OFF "Eteindre alim."
@ -643,9 +673,19 @@
#define MSG_AUTO_HOME "Auto Nullpunkt"
#define MSG_SET_ORIGIN "Setze Nullpunkt"
#define MSG_PREHEAT_PLA "Vorwärmen PLA"
#define MSG_PREHEAT_PLA_SETTINGS "Vorwärm. PLA Ein."
#define MSG_PREHEAT_PLA0 "Vorwärmen PLA 1"
#define MSG_PREHEAT_PLA1 "Vorwärmen PLA 2"
#define MSG_PREHEAT_PLA2 "Vorwärmen PLA 3"
#define MSG_PREHEAT_PLA012 "Vorwärmen PLA Alle"
#define MSG_PREHEAT_PLA_BEDONLY "Vorwärmen PLA Bett"
#define MSG_PREHEAT_PLA_SETTINGS "Vorwärmen PLA Einstellungen"
#define MSG_PREHEAT_ABS "Vorwärmen ABS"
#define MSG_PREHEAT_ABS_SETTINGS "Vorwärm. ABS Ein."
#define MSG_PREHEAT_ABS0 "Vorwärmen ABS 1"
#define MSG_PREHEAT_ABS1 "Vorwärmen ABS 2"
#define MSG_PREHEAT_ABS2 "Vorwärmen ABS 3"
#define MSG_PREHEAT_ABS012 "Vorwärmen ABS Alle"
#define MSG_PREHEAT_ABS_BEDONLY "Vorwärmen ABS Bett"
#define MSG_PREHEAT_ABS_SETTINGS "Vorwärmen ABS Einstellungen"
#define MSG_COOLDOWN "Abkühlen"
#define MSG_SWITCH_PS_ON "Switch Power On"
#define MSG_SWITCH_PS_OFF "Switch Power Off"
@ -832,8 +872,18 @@
#define MSG_AUTO_HOME "Llevar al origen"
#define MSG_SET_ORIGIN "Establecer cero"
#define MSG_PREHEAT_PLA "Precalentar PLA"
#define MSG_PREHEAT_PLA0 "Precalentar PLA 1"
#define MSG_PREHEAT_PLA1 "Precalentar PLA 2"
#define MSG_PREHEAT_PLA2 "Precalentar PLA 3"
#define MSG_PREHEAT_PLA012 "Precalentar PLA Todo"
#define MSG_PREHEAT_PLA_BEDONLY "Precalentar PLA Base"
#define MSG_PREHEAT_PLA_SETTINGS "Ajustar temp. PLA"
#define MSG_PREHEAT_ABS "Precalentar ABS"
#define MSG_PREHEAT_ABS0 "Precalentar ABS 1"
#define MSG_PREHEAT_ABS1 "Precalentar ABS 2"
#define MSG_PREHEAT_ABS2 "Precalentar ABS 3"
#define MSG_PREHEAT_ABS012 "Precalentar ABS Todo"
#define MSG_PREHEAT_ABS_BEDONLY "Precalentar ABS Base"
#define MSG_PREHEAT_ABS_SETTINGS "Ajustar temp. ABS"
#define MSG_COOLDOWN "Enfriar"
#define MSG_SWITCH_PS_ON "Switch Power On"
@ -1026,8 +1076,18 @@
#define MSG_AUTO_HOME "Парковка"
#define MSG_SET_ORIGIN "Запомнить ноль"
#define MSG_PREHEAT_PLA "Преднагрев PLA"
#define MSG_PREHEAT_PLA0 "Преднагрев PLA0"
#define MSG_PREHEAT_PLA1 "Преднагрев PLA1"
#define MSG_PREHEAT_PLA2 "Преднагрев PLA2"
#define MSG_PREHEAT_PLA012 "Преднагрев PLA все "
#define MSG_PREHEAT_PLA_BEDONLY "Преднагрев PLA \002 Кровать"
#define MSG_PREHEAT_PLA_SETTINGS "Настройки PLA"
#define MSG_PREHEAT_ABS "Преднагрев ABS"
#define MSG_PREHEAT_ABS0 "Преднагрев ABS0"
#define MSG_PREHEAT_ABS1 "Преднагрев ABS1"
#define MSG_PREHEAT_ABS2 "Преднагрев ABS2"
#define MSG_PREHEAT_ABS012 "Преднагрев ABS все "
#define MSG_PREHEAT_ABS_BEDONLY "Преднагрев ABS \002 Кровать"
#define MSG_PREHEAT_ABS_SETTINGS "Настройки ABS"
#define MSG_COOLDOWN "Охлаждение"
#define MSG_SWITCH_PS_ON "Switch Power On"
@ -1211,8 +1271,18 @@
#define MSG_AUTO_HOME "Auto Home"
#define MSG_SET_ORIGIN "Imposta Origine"
#define MSG_PREHEAT_PLA "Preriscalda PLA"
#define MSG_PREHEAT_PLA0 "Preriscalda PLA 1"
#define MSG_PREHEAT_PLA1 "Preriscalda PLA 2"
#define MSG_PREHEAT_PLA2 "Preriscalda PLA 3"
#define MSG_PREHEAT_PLA012 "Preriscalda PLA Tutto"
#define MSG_PREHEAT_PLA_BEDONLY "Preriscalda PLA Piatto"
#define MSG_PREHEAT_PLA_SETTINGS "Preris. PLA Conf"
#define MSG_PREHEAT_ABS "Preriscalda ABS"
#define MSG_PREHEAT_ABS0 "Preriscalda ABS 1"
#define MSG_PREHEAT_ABS1 "Preriscalda ABS 2"
#define MSG_PREHEAT_ABS2 "Preriscalda ABS 3"
#define MSG_PREHEAT_ABS012 "Preriscalda ABS Tutto"
#define MSG_PREHEAT_ABS_BEDONLY "Preriscalda ABS Piatto"
#define MSG_PREHEAT_ABS_SETTINGS "Preris. ABS Conf"
#define MSG_COOLDOWN "Raffredda"
#define MSG_SWITCH_PS_ON "Switch Power On"
@ -1398,8 +1468,18 @@
#define MSG_AUTO_HOME "Ir para origen"
#define MSG_SET_ORIGIN "Estabelecer orig."
#define MSG_PREHEAT_PLA "Pre-aquecer PLA"
#define MSG_PREHEAT_PLA0 " pre-aquecer PLA 1"
#define MSG_PREHEAT_PLA1 " pre-aquecer PLA 2"
#define MSG_PREHEAT_PLA2 " pre-aquecer PLA 3"
#define MSG_PREHEAT_PLA012 " pre-aquecer PLA Tudo"
#define MSG_PREHEAT_PLA_BEDONLY " pre-aquecer PLA \002Base"
#define MSG_PREHEAT_PLA_SETTINGS "PLA setting"
#define MSG_PREHEAT_ABS "Pre-aquecer ABS"
#define MSG_PREHEAT_ABS0 " pre-aquecer ABS 1"
#define MSG_PREHEAT_ABS1 " pre-aquecer ABS 2"
#define MSG_PREHEAT_ABS2 " pre-aquecer ABS 3"
#define MSG_PREHEAT_ABS012 " pre-aquecer ABS Tudo"
#define MSG_PREHEAT_ABS_BEDONLY " pre-aquecer ABS \002Base"
#define MSG_PREHEAT_ABS_SETTINGS "ABS setting"
#define MSG_COOLDOWN "Esfriar"
#define MSG_SWITCH_PS_ON "Switch Power On"
@ -1592,8 +1672,18 @@
#define MSG_AUTO_HOME "Aja referenssiin"
#define MSG_SET_ORIGIN "Aseta origo"
#define MSG_PREHEAT_PLA "Esilammita PLA"
#define MSG_PREHEAT_PLA0 "Esilammita PLA 1"
#define MSG_PREHEAT_PLA1 "Esilammita PLA 2"
#define MSG_PREHEAT_PLA2 "Esilammita PLA 3"
#define MSG_PREHEAT_PLA012 "Esilammita PLA Kaikki"
#define MSG_PREHEAT_PLA_BEDONLY "Esilammita PLA Alusta"
#define MSG_PREHEAT_PLA_SETTINGS "Esilamm. PLA konf"
#define MSG_PREHEAT_ABS "Esilammita ABS"
#define MSG_PREHEAT_ABS0 "Esilammita ABS 1"
#define MSG_PREHEAT_ABS1 "Esilammita ABS 2"
#define MSG_PREHEAT_ABS2 "Esilammita ABS 3"
#define MSG_PREHEAT_ABS012 "Esilammita ABS Kaikki"
#define MSG_PREHEAT_ABS_BEDONLY "Esilammita ABS Alusta"
#define MSG_PREHEAT_ABS_SETTINGS "Esilamm. ABS konf"
#define MSG_COOLDOWN "Jaahdyta"
#define MSG_SWITCH_PS_ON "Virta paalle"
@ -1779,8 +1869,18 @@
#define MSG_AUTO_HOME "Levar a l'orichen"
#define MSG_SET_ORIGIN "Establir zero"
#define MSG_PREHEAT_PLA "Precalentar PLA"
#define MSG_PREHEAT_PLA0 "Precalentar PLA0"
#define MSG_PREHEAT_PLA1 "Precalentar PLA1"
#define MSG_PREHEAT_PLA2 "Precalentar PLA2"
#define MSG_PREHEAT_PLA012 "Precalentar PLA a"
#define MSG_PREHEAT_PLA_BEDONLY "Prec. PLA Base"
#define MSG_PREHEAT_PLA_SETTINGS "Achustar tem. PLA"
#define MSG_PREHEAT_ABS "Precalentar ABS"
#define MSG_PREHEAT_ABS0 "Precalentar ABS0"
#define MSG_PREHEAT_ABS1 "Precalentar ABS1"
#define MSG_PREHEAT_ABS2 "Precalentar ABS2"
#define MSG_PREHEAT_ABS012 "Precalentar ABS a"
#define MSG_PREHEAT_ABS_BEDONLY "Prec. ABS Base"
#define MSG_PREHEAT_ABS_SETTINGS "Achustar tem. ABS"
#define MSG_COOLDOWN "Enfriar"
#define MSG_SWITCH_PS_ON "Enchegar Fuent"
@ -1972,8 +2072,18 @@
#define MSG_AUTO_HOME "Auto home"
#define MSG_SET_ORIGIN "Nulpunt instellen"
#define MSG_PREHEAT_PLA "PLA voorverwarmen"
#define MSG_PREHEAT_PLA0 "PLA voorverw. 0"
#define MSG_PREHEAT_PLA1 "PLA voorverw. 1"
#define MSG_PREHEAT_PLA2 "PLA voorverw. 2"
#define MSG_PREHEAT_PLA012 "PLA voorverw. aan"
#define MSG_PREHEAT_PLA_BEDONLY "PLA voorverw. Bed"
#define MSG_PREHEAT_PLA_SETTINGS "PLA verw. conf"
#define MSG_PREHEAT_ABS "ABS voorverwarmen"
#define MSG_PREHEAT_ABS0 "ABS voorverw. 0"
#define MSG_PREHEAT_ABS1 "ABS voorverw. 1"
#define MSG_PREHEAT_ABS2 "ABS voorverw. 2"
#define MSG_PREHEAT_ABS012 "ABS voorverw. aan"
#define MSG_PREHEAT_ABS_BEDONLY "ABS voorverw. Bed"
#define MSG_PREHEAT_ABS_SETTINGS "ABS verw. conf"
#define MSG_COOLDOWN "Afkoelen"
#define MSG_SWITCH_PS_ON "Stroom aan"

View File

@ -304,37 +304,6 @@ static void lcd_autostart_sd()
}
#endif
void lcd_preheat_pla()
{
setTargetHotend0(plaPreheatHotendTemp);
setTargetHotend1(plaPreheatHotendTemp);
setTargetHotend2(plaPreheatHotendTemp);
setTargetBed(plaPreheatHPBTemp);
fanSpeed = plaPreheatFanSpeed;
lcd_return_to_status();
setWatch(); // heater sanity check timer
}
void lcd_preheat_abs()
{
setTargetHotend0(absPreheatHotendTemp);
setTargetHotend1(absPreheatHotendTemp);
setTargetHotend2(absPreheatHotendTemp);
setTargetBed(absPreheatHPBTemp);
fanSpeed = absPreheatFanSpeed;
lcd_return_to_status();
setWatch(); // heater sanity check timer
}
static void lcd_cooldown()
{
setTargetHotend0(0);
setTargetHotend1(0);
setTargetHotend2(0);
setTargetBed(0);
lcd_return_to_status();
}
#ifdef BABYSTEPPING
static void lcd_babystep_x()
{
@ -435,6 +404,154 @@ static void lcd_tune_menu()
END_MENU();
}
void lcd_preheat_pla0()
{
setTargetHotend0(plaPreheatHotendTemp);
setTargetBed(plaPreheatHPBTemp);
fanSpeed = plaPreheatFanSpeed;
lcd_return_to_status();
setWatch(); // heater sanity check timer
}
void lcd_preheat_abs0()
{
setTargetHotend0(absPreheatHotendTemp);
setTargetBed(absPreheatHPBTemp);
fanSpeed = absPreheatFanSpeed;
lcd_return_to_status();
setWatch(); // heater sanity check timer
}
#if TEMP_SENSOR_1 != 0 //2nd extruder preheat
void lcd_preheat_pla1()
{
setTargetHotend1(plaPreheatHotendTemp);
setTargetBed(plaPreheatHPBTemp);
fanSpeed = plaPreheatFanSpeed;
lcd_return_to_status();
setWatch(); // heater sanity check timer
}
void lcd_preheat_abs1()
{
setTargetHotend1(absPreheatHotendTemp);
setTargetBed(absPreheatHPBTemp);
fanSpeed = absPreheatFanSpeed;
lcd_return_to_status();
setWatch(); // heater sanity check timer
}
#endif //2nd extruder preheat
#if TEMP_SENSOR_2 != 0 //3 extruder preheat
void lcd_preheat_pla2()
{
setTargetHotend2(plaPreheatHotendTemp);
setTargetBed(plaPreheatHPBTemp);
fanSpeed = plaPreheatFanSpeed;
lcd_return_to_status();
setWatch(); // heater sanity check timer
}
void lcd_preheat_abs2()
{
setTargetHotend2(absPreheatHotendTemp);
setTargetBed(absPreheatHPBTemp);
fanSpeed = absPreheatFanSpeed;
lcd_return_to_status();
setWatch(); // heater sanity check timer
}
#endif //3 extruder preheat
#if TEMP_SENSOR_1 != 0 || TEMP_SENSOR_2 != 0 //more than one extruder present
void lcd_preheat_pla012()
{
setTargetHotend0(plaPreheatHotendTemp);
setTargetHotend1(plaPreheatHotendTemp);
setTargetHotend2(plaPreheatHotendTemp);
setTargetBed(plaPreheatHPBTemp);
fanSpeed = plaPreheatFanSpeed;
lcd_return_to_status();
setWatch(); // heater sanity check timer
}
void lcd_preheat_abs012()
{
setTargetHotend0(absPreheatHotendTemp);
setTargetHotend1(absPreheatHotendTemp);
setTargetHotend2(absPreheatHotendTemp);
setTargetBed(absPreheatHPBTemp);
fanSpeed = absPreheatFanSpeed;
lcd_return_to_status();
setWatch(); // heater sanity check timer
}
#endif //more than one extruder present
void lcd_preheat_pla_bedonly()
{
setTargetBed(plaPreheatHPBTemp);
fanSpeed = plaPreheatFanSpeed;
lcd_return_to_status();
setWatch(); // heater sanity check timer
}
void lcd_preheat_abs_bedonly()
{
setTargetBed(absPreheatHPBTemp);
fanSpeed = absPreheatFanSpeed;
lcd_return_to_status();
setWatch(); // heater sanity check timer
}
static void lcd_preheat_pla_menu()
{
START_MENU();
MENU_ITEM(back, MSG_PREPARE, lcd_prepare_menu);
MENU_ITEM(function, MSG_PREHEAT_PLA0, lcd_preheat_pla0);
#if TEMP_SENSOR_1 != 0 //2 extruder preheat
MENU_ITEM(function, MSG_PREHEAT_PLA1, lcd_preheat_pla1);
#endif //2 extruder preheat
#if TEMP_SENSOR_2 != 0 //3 extruder preheat
MENU_ITEM(function, MSG_PREHEAT_PLA2, lcd_preheat_pla2);
#endif //3 extruder preheat
#if TEMP_SENSOR_1 != 0 || TEMP_SENSOR_2 != 0 //all extruder preheat
MENU_ITEM(function, MSG_PREHEAT_PLA012, lcd_preheat_pla012);
#endif //2 extruder preheat
#if TEMP_SENSOR_BED != 0
MENU_ITEM(function, MSG_PREHEAT_PLA_BEDONLY, lcd_preheat_pla_bedonly);
#endif
END_MENU();
}
static void lcd_preheat_abs_menu()
{
START_MENU();
MENU_ITEM(back, MSG_PREPARE, lcd_prepare_menu);
MENU_ITEM(function, MSG_PREHEAT_ABS0, lcd_preheat_abs0);
#if TEMP_SENSOR_1 != 0 //2 extruder preheat
MENU_ITEM(function, MSG_PREHEAT_ABS1, lcd_preheat_abs1);
#endif //2 extruder preheat
#if TEMP_SENSOR_2 != 0 //3 extruder preheat
MENU_ITEM(function, MSG_PREHEAT_ABS2, lcd_preheat_abs2);
#endif //3 extruder preheat
#if TEMP_SENSOR_1 != 0 || TEMP_SENSOR_2 != 0 //all extruder preheat
MENU_ITEM(function, MSG_PREHEAT_ABS012, lcd_preheat_abs012);
#endif //2 extruder preheat
#if TEMP_SENSOR_BED != 0
MENU_ITEM(function, MSG_PREHEAT_ABS_BEDONLY, lcd_preheat_abs_bedonly);
#endif
END_MENU();
}
void lcd_cooldown()
{
setTargetHotend0(0);
setTargetHotend1(0);
setTargetHotend2(0);
setTargetBed(0);
fanSpeed = 0;
lcd_return_to_status();
}
static void lcd_prepare_menu()
{
START_MENU();
@ -447,8 +564,15 @@ static void lcd_prepare_menu()
MENU_ITEM(gcode, MSG_DISABLE_STEPPERS, PSTR("M84"));
MENU_ITEM(gcode, MSG_AUTO_HOME, PSTR("G28"));
//MENU_ITEM(gcode, MSG_SET_ORIGIN, PSTR("G92 X0 Y0 Z0"));
MENU_ITEM(function, MSG_PREHEAT_PLA, lcd_preheat_pla);
MENU_ITEM(function, MSG_PREHEAT_ABS, lcd_preheat_abs);
#if TEMP_SENSOR_0 != 0
#if TEMP_SENSOR_1 != 0 || TEMP_SENSOR_2 != 0 || TEMP_SENSOR_BED != 0
MENU_ITEM(submenu, MSG_PREHEAT_PLA, lcd_preheat_pla_menu);
MENU_ITEM(submenu, MSG_PREHEAT_ABS, lcd_preheat_abs_menu);
#else
MENU_ITEM(function, MSG_PREHEAT_PLA, lcd_preheat_pla0);
MENU_ITEM(function, MSG_PREHEAT_ABS, lcd_preheat_abs0);
#endif
#endif
MENU_ITEM(function, MSG_COOLDOWN, lcd_cooldown);
#if PS_ON_PIN > -1
if (powersupply)