Clean up some LCD conditions

This commit is contained in:
Scott Lahteine 2019-07-11 06:11:07 -05:00
parent 3218c4b33f
commit 948c3f580b
5 changed files with 16 additions and 23 deletions

View File

@ -229,17 +229,14 @@
// Einstart OLED has Cardinal nav via pins defined in pins_EINSTART-S.h
#if ENABLED(U8GLIB_SH1106_EINSTART)
#define ULTRA_LCD
#define DOGLCD
#define ULTIPANEL
#define NEWPANEL
#endif
/**
* FSMC/SPI TFT PANELS
*/
#if ENABLED(MKS_ROBIN_TFT)
#define ULTRA_LCD
#define DOGLCD
#define ULTIPANEL
#endif
@ -330,7 +327,7 @@
#endif
#if ENABLED(ULTIPANEL)
#define NEWPANEL // Disable this if you actually have no click-encoder panel
#define NEWPANEL // Disable if there's actually no click-encoder panel
#define ULTRA_LCD
#endif

View File

@ -221,9 +221,9 @@
#endif
#if ENABLED(CASE_LIGHT_ENABLE) && !defined(CASE_LIGHT_PIN) && !defined(SPINDLE_LASER_ENA_PIN)
#if NUM_SERVOS <= 1 // try to use servo connector first
#if NUM_SERVOS <= 1 // Prefer the servo connector
#define CASE_LIGHT_PIN 6 // Hardware PWM
#elif !(BOTH(ULTRA_LCD, NEWPANEL) && ANY(PANEL_ONE, VIKI2, miniVIKI, MINIPANEL, REPRAPWORLD_KEYPAD)) // try to use AUX 2
#elif HAS_FREE_AUX2_PINS // try to use AUX 2
#define CASE_LIGHT_PIN 44 // Hardware PWM
#endif
#endif
@ -232,11 +232,11 @@
// M3/M4/M5 - Spindle/Laser Control
//
#if HAS_CUTTER && !PIN_EXISTS(SPINDLE_LASER_ENA)
#if !defined(NUM_SERVOS) || NUM_SERVOS == 0 // try to use servo connector first
#if !defined(NUM_SERVOS) || NUM_SERVOS == 0 // Prefer the servo connector
#define SPINDLE_LASER_ENA_PIN 4 // Pullup or pulldown!
#define SPINDLE_LASER_PWM_PIN 6 // Hardware PWM
#define SPINDLE_DIR_PIN 5
#elif !(BOTH(ULTRA_LCD, NEWPANEL) && ANY(PANEL_ONE, VIKI2, miniVIKI, MINIPANEL, REPRAPWORLD_KEYPAD)) // try to use AUX 2
#elif HAS_FREE_AUX2_PINS // try to use AUX 2
#define SPINDLE_LASER_ENA_PIN 40 // Pullup or pulldown!
#define SPINDLE_LASER_PWM_PIN 44 // Hardware PWM
#define SPINDLE_DIR_PIN 65

View File

@ -47,6 +47,8 @@
#define IS_RAMPS_SF
#endif
#define HAS_FREE_AUX2_PINS !(BOTH(ULTRA_LCD, NEWPANEL) && ANY(PANEL_ONE, VIKI2, miniVIKI, MINIPANEL, REPRAPWORLD_KEYPAD))
//
// RAMPS 1.3 / 1.4 - ATmega1280, ATmega2560
//
@ -1079,3 +1081,5 @@
#endif
#endif
#endif
#undef HAS_FREE_AUX2_PINS

View File

@ -258,12 +258,10 @@
#define PS_ON_PIN 12
#endif
#define AUX2_PINS_FREE !( BOTH(ULTRA_LCD, NEWPANEL) && ANY(PANEL_ONE, VIKI2, miniVIKI, MINIPANEL, REPRAPWORLD_KEYPAD) )
#if ENABLED(CASE_LIGHT_ENABLE) && !defined(CASE_LIGHT_PIN) && !defined(SPINDLE_LASER_ENA_PIN)
#if NUM_SERVOS <= 1 // try to use servo connector first
#if NUM_SERVOS <= 1 // Prefer the servo connector
#define CASE_LIGHT_PIN 6 // Hardware PWM
#elif AUX2_PINS_FREE
#elif HAS_FREE_AUX2_PINS
#define CASE_LIGHT_PIN 44 // Hardware PWM
#endif
#endif
@ -276,7 +274,7 @@
#define SPINDLE_LASER_ENA_PIN 4 // Pullup or pulldown!
#define SPINDLE_LASER_PWM_PIN 6 // Hardware PWM
#define SPINDLE_DIR_PIN 5
#elif AUX2_PINS_FREE
#elif HAS_FREE_AUX2_PINS
#define SPINDLE_LASER_ENA_PIN 40 // Pullup or pulldown!
#define SPINDLE_LASER_PWM_PIN 44 // Hardware PWM
#define SPINDLE_DIR_PIN 65
@ -285,8 +283,6 @@
#endif
#endif
#undef AUX2_PINS_FREE
//
// TMC software SPI
//

View File

@ -157,12 +157,10 @@
#define PS_ON_PIN 12
#endif
#define AUX2_PINS_FREE !( BOTH(ULTRA_LCD, NEWPANEL) && ANY(PANEL_ONE, VIKI2, miniVIKI, MINIPANEL, REPRAPWORLD_KEYPAD) )
#if ENABLED(CASE_LIGHT_ENABLE) && !defined(CASE_LIGHT_PIN) && !defined(SPINDLE_LASER_ENA_PIN)
#if NUM_SERVOS <= 1 // try to use servo connector first
#if NUM_SERVOS <= 1 // Prefer the servo connector
#define CASE_LIGHT_PIN 6 // Hardware PWM
#elif AUX2_PINS_FREE
#elif HAS_FREE_AUX2_PINS
#define CASE_LIGHT_PIN 44 // Hardware PWM
#endif
#endif
@ -171,19 +169,17 @@
// M3/M4/M5 - Spindle/Laser Control
//
#if HAS_CUTTER && !PIN_EXISTS(SPINDLE_LASER_ENA)
#if !defined(NUM_SERVOS) || NUM_SERVOS == 0 // try to use servo connector first
#if !defined(NUM_SERVOS) || NUM_SERVOS == 0 // Prefer the servo connector
#define SPINDLE_LASER_ENA_PIN 4 // Pullup or pulldown!
#define SPINDLE_LASER_PWM_PIN 6 // Hardware PWM
#define SPINDLE_DIR_PIN 5
#elif AUX2_PINS_FREE
#elif HAS_FREE_AUX2_PINS
#define SPINDLE_LASER_ENA_PIN 40 // Pullup or pulldown!
#define SPINDLE_LASER_PWM_PIN 44 // Hardware PWM
#define SPINDLE_DIR_PIN 65
#endif
#endif
#undef AUX2_PINS_FREE
//
// TMC software SPI
//