Update IDEX menus, add post-M605 event G-code (#20133)

Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
This commit is contained in:
InsanityAutomation 2020-11-16 00:56:05 -05:00 committed by Scott Lahteine
parent 3d9b453000
commit 983bb89063
5 changed files with 20 additions and 9 deletions

View File

@ -637,6 +637,9 @@
// Default x offset in duplication mode (typically set to half print bed width)
#define DEFAULT_DUPLICATION_X_OFFSET 100
// Default action to execute following M605 mode change commands. Typically G28X to apply new mode.
//#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X"
#endif
// Activate a solenoid on the active extruder with M380. Disable all with M381.

View File

@ -103,6 +103,10 @@
}
idex_set_parked(false);
set_duplication_enabled(false);
#ifdef EVENT_GCODE_IDEX_AFTER_MODECHANGE
gcode.process_subcommands_now_P(PSTR(EVENT_GCODE_IDEX_AFTER_MODECHANGE));
#endif
}
else if (!parser.seen('W')) // if no S or W parameter, the DXC mode gets reset to the user's default
dual_x_carriage_mode = DEFAULT_DUAL_X_CARRIAGE_MODE;

View File

@ -144,6 +144,7 @@ namespace Language_en {
PROGMEM Language_Str MSG_IDEX_MODE_DUPLICATE = _UxGT("Duplication");
PROGMEM Language_Str MSG_IDEX_MODE_MIRRORED_COPY = _UxGT("Mirrored Copy");
PROGMEM Language_Str MSG_IDEX_MODE_FULL_CTRL = _UxGT("Full Control");
PROGMEM Language_Str MSG_IDEX_DUPE_GAP = _UxGT("Duplicate X-Gap");
PROGMEM Language_Str MSG_HOTEND_OFFSET_X = _UxGT("2nd Nozzle X");
PROGMEM Language_Str MSG_HOTEND_OFFSET_Y = _UxGT("2nd Nozzle Y");
PROGMEM Language_Str MSG_HOTEND_OFFSET_Z = _UxGT("2nd Nozzle Z");

View File

@ -194,16 +194,19 @@ void menu_advanced_settings();
START_MENU();
BACK_ITEM(MSG_CONFIGURATION);
GCODES_ITEM(MSG_IDEX_MODE_AUTOPARK, PSTR("M605 S1\nG28 X\nG1 X100"));
GCODES_ITEM(MSG_IDEX_MODE_AUTOPARK, PSTR("M605S1\nG28X\nG1X0"));
GCODES_ITEM(MSG_IDEX_MODE_DUPLICATE, need_g28
? PSTR("M605 S1\nT0\nG28\nM605 S2 X200\nG28 X\nG1 X100") // If Y or Z is not homed, do a full G28 first
: PSTR("M605 S1\nT0\nM605 S2 X200\nG28 X\nG1 X100")
? PSTR("M605S1\nT0\nG28\nM605S2\nG28X\nG1X0") // If Y or Z is not homed, do a full G28 first
: PSTR("M605S1\nT0\nM605S2\nG28X\nG1X0")
);
GCODES_ITEM(MSG_IDEX_MODE_MIRRORED_COPY, need_g28
? PSTR("M605 S1\nT0\nG28\nM605 S2 X200\nG28 X\nG1 X100\nM605 S3 X200") // If Y or Z is not homed, do a full G28 first
: PSTR("M605 S1\nT0\nM605 S2 X200\nG28 X\nG1 X100\nM605 S3 X200")
? PSTR("M605S1\nT0\nG28\nM605S2\nG28X\nG1X0\nM605S3") // If Y or Z is not homed, do a full G28 first
: PSTR("M605S1\nT0\nM605S2\nG28 X\nG1X0\nM605S3")
);
GCODES_ITEM(MSG_IDEX_MODE_FULL_CTRL, PSTR("M605 S0\nG28 X"));
GCODES_ITEM(MSG_IDEX_MODE_FULL_CTRL, PSTR("M605S0\nG28X"));
EDIT_ITEM(float42_52, MSG_IDEX_DUPE_GAP, &duplicate_extruder_x_offset, (X2_MIN_POS) - (X1_MIN_POS), (X_BED_SIZE) - 20);
END_MENU();
}

View File

@ -259,10 +259,10 @@ exec_test $1 $2 "Mightyboard Rev. E | CoreXY, Gradient Mix | Endstop Int. | Home
######## Example Configurations ##############
#
# Test a full-featured CR-10S config
# Test a basic DUAL_X_CARRIAGE configuration
#
use_example_configs Creality/CR-10S
exec_test $1 $2 "Full-featured CR-10S config"
use_example_configs Formbot/T_Rex_3
exec_test $1 $2 "Formbot/T_Rex_3 example configuration."
#
# BQ Hephestos 2