Followup to probe_at_point change (#15342)

This commit is contained in:
Robby Candra 2019-09-25 14:29:10 +07:00 committed by Scott Lahteine
parent 149e9b733e
commit 9c288a682d
3 changed files with 6 additions and 6 deletions

View File

@ -177,8 +177,8 @@
serialprintPGM(csv ? PSTR("CSV:\n") : PSTR("LCD:\n"));
}
// Add XY probe offset from extruder because probe_pt() subtracts them when
// moving to the xy position to be measured. This ensures better agreement between
// Add XY probe offset from extruder because probe_at_point() subtracts them when
// moving to the XY position to be measured. This ensures better agreement between
// the current Z position after G28 and the mesh values.
const float current_xi = find_closest_x_index(current_position[X_AXIS] + probe_offset[X_AXIS]),
current_yi = find_closest_y_index(current_position[Y_AXIS] + probe_offset[Y_AXIS]);

View File

@ -277,7 +277,7 @@ void GcodeSuite::G34() {
// After this operation the z position needs correction
set_axis_is_not_at_home(Z_AXIS);
// Stow the probe, as the last call to probe_pt(...) left
// Stow the probe, as the last call to probe_at_point(...) left
// the probe deployed if it was successful.
STOW_PROBE();

View File

@ -532,7 +532,7 @@ static bool do_probe_move(const float z, const float fr_mm_s) {
/**
* @brief Probe at the current XY (possibly more than once) to find the bed Z.
*
* @details Used by probe_pt to get the bed Z height at the current XY.
* @details Used by probe_at_point to get the bed Z height at the current XY.
* Leaves current_position[Z_AXIS] at the height where the probe triggered.
*
* @return The Z position of the bed at the current XY or NAN on error.
@ -686,7 +686,7 @@ static float run_z_probe() {
float probe_at_point(const float &rx, const float &ry, const ProbePtRaise raise_after/*=PROBE_PT_NONE*/, const uint8_t verbose_level/*=0*/, const bool probe_relative/*=true*/) {
if (DEBUGGING(LEVELING)) {
DEBUG_ECHOLNPAIR(
">>> probe_pt(", LOGICAL_X_POSITION(rx), ", ", LOGICAL_Y_POSITION(ry),
">>> probe_at_point(", LOGICAL_X_POSITION(rx), ", ", LOGICAL_Y_POSITION(ry),
", ", raise_after == PROBE_PT_RAISE ? "raise" : raise_after == PROBE_PT_STOW ? "stow" : "none",
", ", int(verbose_level),
", ", probe_relative ? "probe" : "nozzle", "_relative)"
@ -743,7 +743,7 @@ float probe_at_point(const float &rx, const float &ry, const ProbePtRaise raise_
SERIAL_ERROR_MSG(MSG_ERR_PROBING_FAILED);
}
if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPGM("<<< probe_pt");
if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPGM("<<< probe_at_point");
return measured_z;
}