MPCNC/Firmware2
1
0
Fork 0
Code Issues 1 Pull Requests Releases Wiki Activity

Clean up trailing whitespace

Browse Source
This commit is contained in:
Scott Lahteine 2020-01-02 16:33:50 -06:00
parent a7b0b390cd
commit a2cda631d9
6 changed files with 17 additions and 17 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Marlin/src/module/stepper.h
View File

@ -67,7 +67,7 @@
#ifdef CPU_32_BIT
/**
* Duration of START_TIMED_PULSE
*
*
* ...as measured on an LPC1768 with a scope and converted to cycles.
* Not applicable to other 32-bit processors, but as long as others
* take longer, pulses will be longer. For example the SKR Pro

4
Marlin/src/pins/esp32/pins_MRR_ESPE.h
View File

@ -107,8 +107,8 @@
#define HEATER_BED_PIN 144 // 4
#define CONTROLLER_FAN_PIN 147
//#define E0_AUTO_FAN_PIN 148 // need to update Configuration_adv.h @section extruder
//#define E1_AUTO_FAN_PIN 149 // need to update Configuration_adv.h @section extruder
//#define E0_AUTO_FAN_PIN 148 // need to update Configuration_adv.h @section extruder
//#define E1_AUTO_FAN_PIN 149 // need to update Configuration_adv.h @section extruder
#define FAN1_PIN 149
//

2
Marlin/src/pins/stm32/pins_BTT_BTT002_V1_0.h
View File

@ -155,7 +155,7 @@
#define FAN_PIN PB9 // Fan0
#define FAN1_PIN PB8 // Fan1
// HAL SPI1 pins
// HAL SPI1 pins
#define CUSTOM_SPI_PINS
#if ENABLED(CUSTOM_SPI_PINS)
#define SCK_PIN PA5 // SPI1 SCLK

2
Marlin/src/pins/stm32/pins_MKS_ROBIN_MINI.h
View File

@ -42,7 +42,7 @@
// 2K in a AT24C16N
#define EEPROM_PAGE_SIZE (uint16)0x800 // 2048
#define EEPROM_START_ADDRESS ((uint32)(0x8000000 + 512 * 1024 - 2 * EEPROM_PAGE_SIZE))
#define E2END (EEPROM_PAGE_SIZE - 1)
#define E2END (EEPROM_PAGE_SIZE - 1)
//
// Note: MKS Robin mini board is using SPI2 interface.

16
buildroot/share/PlatformIO/variants/FLY_F407ZG/ldscript.ld
View File

@ -134,7 +134,7 @@ SECTIONS
_sidata = LOADADDR(.data);
/* Initialized data sections goes into RAM, load LMA copy after code */
.data :
.data :
{
. = ALIGN(4);
_sdata = .; /* create a global symbol at data start */
@ -147,11 +147,11 @@ SECTIONS
_siccmram = LOADADDR(.ccmram);
/* CCM-RAM section
*
* IMPORTANT NOTE!
/* CCM-RAM section
*
* IMPORTANT NOTE!
* If initialized variables will be placed in this section,
* the startup code needs to be modified to copy the init-values.
* the startup code needs to be modified to copy the init-values.
*/
.ccmram :
{
@ -159,12 +159,12 @@ SECTIONS
_sccmram = .; /* create a global symbol at ccmram start */
*(.ccmram)
*(.ccmram*)
. = ALIGN(4);
_eccmram = .; /* create a global symbol at ccmram end */
} >CCMRAM AT> FLASH
/* Uninitialized data section */
. = ALIGN(4);
.bss :
@ -191,7 +191,7 @@ SECTIONS
. = . + _Min_Stack_Size;
. = ALIGN(4);
} >RAM
/* Remove information from the standard libraries */
/DISCARD/ :

8
buildroot/share/PlatformIO/variants/FLY_F407ZG/variant.h
View File

@ -163,15 +163,15 @@ extern "C" {
// Below SPI and I2C definitions already done in the core
// Could be redefined here if differs from the default one
// SPI Definitions
#define PIN_SPI_SS PF11
#define PIN_SPI_SS PF11
#define PIN_SPI_MOSI PB15
#define PIN_SPI_MISO PB14
#define PIN_SPI_SCK PB13
#define PIN_SPI_MISO PB14
#define PIN_SPI_SCK PB13
//max6675
//#define PIN_SPI_SS PA4
//#define PIN_SPI_SS PA4
//#define PIN_SPI_SCK PA5
//#define PIN_SPI_MISO PA6
//#define PIN_SPI_MOSI PA7