diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index 4579ec6671..e57f7c529a 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -645,8 +645,8 @@ * Do not activate settings that the probe might not understand. Clones might misunderstand * advanced commands. * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. + * Note: If the probe is not deploying, do a "Reset" and "Self-Test" and then check the + * wiring of the BROWN, RED and ORANGE wires. * * Note: If the trigger signal of your probe is not being recognized, it has been very often * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" diff --git a/Marlin/src/lcd/language/language_en.h b/Marlin/src/lcd/language/language_en.h index ba8cf1cfec..48c6e5b1a3 100644 --- a/Marlin/src/lcd/language/language_en.h +++ b/Marlin/src/lcd/language/language_en.h @@ -414,14 +414,14 @@ namespace Language_en { PROGMEM Language_Str MSG_ZPROBE_OUT = _UxGT("Z Probe Past Bed"); PROGMEM Language_Str MSG_SKEW_FACTOR = _UxGT("Skew Factor"); PROGMEM Language_Str MSG_BLTOUCH = _UxGT("BLTouch"); - PROGMEM Language_Str MSG_BLTOUCH_SELFTEST = _UxGT("Cmd: Self-Test"); - PROGMEM Language_Str MSG_BLTOUCH_RESET = _UxGT("Cmd: Reset"); - PROGMEM Language_Str MSG_BLTOUCH_STOW = _UxGT("Cmd: Stow"); - PROGMEM Language_Str MSG_BLTOUCH_DEPLOY = _UxGT("Cmd: Deploy"); - PROGMEM Language_Str MSG_BLTOUCH_SW_MODE = _UxGT("Cmd: SW-Mode"); - PROGMEM Language_Str MSG_BLTOUCH_5V_MODE = _UxGT("Cmd: 5V-Mode"); - PROGMEM Language_Str MSG_BLTOUCH_OD_MODE = _UxGT("Cmd: OD-Mode"); - PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE = _UxGT("Cmd: Mode-Store"); + PROGMEM Language_Str MSG_BLTOUCH_SELFTEST = _UxGT("Self-Test"); + PROGMEM Language_Str MSG_BLTOUCH_RESET = _UxGT("Reset"); + PROGMEM Language_Str MSG_BLTOUCH_STOW = _UxGT("Stow"); + PROGMEM Language_Str MSG_BLTOUCH_DEPLOY = _UxGT("Deploy"); + PROGMEM Language_Str MSG_BLTOUCH_SW_MODE = _UxGT("SW-Mode"); + PROGMEM Language_Str MSG_BLTOUCH_5V_MODE = _UxGT("5V-Mode"); + PROGMEM Language_Str MSG_BLTOUCH_OD_MODE = _UxGT("OD-Mode"); + PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE = _UxGT("Mode-Store"); PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE_5V = _UxGT("Set BLTouch to 5V"); PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE_OD = _UxGT("Set BLTouch to OD"); PROGMEM Language_Str MSG_BLTOUCH_MODE_ECHO = _UxGT("Report Drain"); diff --git a/Marlin/src/lcd/language/language_es.h b/Marlin/src/lcd/language/language_es.h index bd63e6479e..0af31f9a3c 100644 --- a/Marlin/src/lcd/language/language_es.h +++ b/Marlin/src/lcd/language/language_es.h @@ -385,14 +385,14 @@ namespace Language_es { PROGMEM Language_Str MSG_ZPROBE_OUT = _UxGT("Sonda Z fuera cama"); PROGMEM Language_Str MSG_SKEW_FACTOR = _UxGT("Factor de desviación"); PROGMEM Language_Str MSG_BLTOUCH = _UxGT("BLTouch"); - PROGMEM Language_Str MSG_BLTOUCH_SELFTEST = _UxGT("Cmd: Auto-Prueba"); - PROGMEM Language_Str MSG_BLTOUCH_RESET = _UxGT("Cmd: Reiniciar"); - PROGMEM Language_Str MSG_BLTOUCH_STOW = _UxGT("Cmd: Subir pistón"); - PROGMEM Language_Str MSG_BLTOUCH_DEPLOY = _UxGT("Cmd: Bajar pistón"); - PROGMEM Language_Str MSG_BLTOUCH_SW_MODE = _UxGT("Cmd: Modo Software"); - PROGMEM Language_Str MSG_BLTOUCH_5V_MODE = _UxGT("Cmd: Modo 5V"); - PROGMEM Language_Str MSG_BLTOUCH_OD_MODE = _UxGT("Cmd: Modo OD"); - PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE = _UxGT("Cmd: Modo almacenar"); + PROGMEM Language_Str MSG_BLTOUCH_SELFTEST = _UxGT("Auto-Prueba"); + PROGMEM Language_Str MSG_BLTOUCH_RESET = _UxGT("Reiniciar"); + PROGMEM Language_Str MSG_BLTOUCH_STOW = _UxGT("Subir pistón"); + PROGMEM Language_Str MSG_BLTOUCH_DEPLOY = _UxGT("Bajar pistón"); + PROGMEM Language_Str MSG_BLTOUCH_SW_MODE = _UxGT("Modo Software"); + PROGMEM Language_Str MSG_BLTOUCH_5V_MODE = _UxGT("Modo 5V"); + PROGMEM Language_Str MSG_BLTOUCH_OD_MODE = _UxGT("Modo OD"); + PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE = _UxGT("Modo almacenar"); PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE_5V = _UxGT("Poner BLTouch a 5V"); PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE_OD = _UxGT("Poner BLTouch a OD"); PROGMEM Language_Str MSG_BLTOUCH_MODE_ECHO = _UxGT("Informe de drenaje"); diff --git a/Marlin/src/lcd/language/language_fr.h b/Marlin/src/lcd/language/language_fr.h index 72cbfcf3c1..5205205ce6 100644 --- a/Marlin/src/lcd/language/language_fr.h +++ b/Marlin/src/lcd/language/language_fr.h @@ -372,13 +372,13 @@ namespace Language_fr { PROGMEM Language_Str MSG_ZPROBE_OUT = _UxGT("Sonde Z hors lit"); PROGMEM Language_Str MSG_SKEW_FACTOR = _UxGT("Facteur écart"); PROGMEM Language_Str MSG_BLTOUCH = _UxGT("BLTouch"); - PROGMEM Language_Str MSG_BLTOUCH_SELFTEST = _UxGT("Cmd: Self-Test"); - PROGMEM Language_Str MSG_BLTOUCH_RESET = _UxGT("Cmd: Reset"); - PROGMEM Language_Str MSG_BLTOUCH_STOW = _UxGT("Cmd: Ranger"); - PROGMEM Language_Str MSG_BLTOUCH_DEPLOY = _UxGT("Cmd: Déployer"); - PROGMEM Language_Str MSG_BLTOUCH_SW_MODE = _UxGT("Cmd: Mode SW"); - PROGMEM Language_Str MSG_BLTOUCH_5V_MODE = _UxGT("Cmd: Mode 5V"); - PROGMEM Language_Str MSG_BLTOUCH_OD_MODE = _UxGT("Cmd: Mode OD"); + PROGMEM Language_Str MSG_BLTOUCH_SELFTEST = _UxGT("Self-Test"); + PROGMEM Language_Str MSG_BLTOUCH_RESET = _UxGT("Reset"); + PROGMEM Language_Str MSG_BLTOUCH_STOW = _UxGT("Ranger"); + PROGMEM Language_Str MSG_BLTOUCH_DEPLOY = _UxGT("Déployer"); + PROGMEM Language_Str MSG_BLTOUCH_SW_MODE = _UxGT("Mode SW"); + PROGMEM Language_Str MSG_BLTOUCH_5V_MODE = _UxGT("Mode 5V"); + PROGMEM Language_Str MSG_BLTOUCH_OD_MODE = _UxGT("Mode OD"); PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE = _UxGT("Appliquer Mode"); PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE_5V = _UxGT("Mise en 5V"); PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE_OD = _UxGT("Mise en OD"); diff --git a/Marlin/src/lcd/language/language_gl.h b/Marlin/src/lcd/language/language_gl.h index 66187e8a6b..6f4c5e5e71 100644 --- a/Marlin/src/lcd/language/language_gl.h +++ b/Marlin/src/lcd/language/language_gl.h @@ -407,14 +407,14 @@ namespace Language_gl { PROGMEM Language_Str MSG_ZPROBE_OUT = _UxGT("Sonda-Z fóra Cama"); PROGMEM Language_Str MSG_SKEW_FACTOR = _UxGT("Factor de Desviación"); PROGMEM Language_Str MSG_BLTOUCH = _UxGT("BLTouch"); - PROGMEM Language_Str MSG_BLTOUCH_SELFTEST = _UxGT("Cmd: Auto-Test"); - PROGMEM Language_Str MSG_BLTOUCH_RESET = _UxGT("Cmd: Reiniciar"); - PROGMEM Language_Str MSG_BLTOUCH_STOW = _UxGT("Cmd: Recoller"); - PROGMEM Language_Str MSG_BLTOUCH_DEPLOY = _UxGT("Cmd: Estender"); - PROGMEM Language_Str MSG_BLTOUCH_SW_MODE = _UxGT("Cmd: Modo Software"); - PROGMEM Language_Str MSG_BLTOUCH_5V_MODE = _UxGT("Cmd: Modo 5V"); - PROGMEM Language_Str MSG_BLTOUCH_OD_MODE = _UxGT("Cmd: Modo OD"); - PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE = _UxGT("Cmd: Modo Almacenar"); + PROGMEM Language_Str MSG_BLTOUCH_SELFTEST = _UxGT("Auto-Test"); + PROGMEM Language_Str MSG_BLTOUCH_RESET = _UxGT("Reiniciar"); + PROGMEM Language_Str MSG_BLTOUCH_STOW = _UxGT("Recoller"); + PROGMEM Language_Str MSG_BLTOUCH_DEPLOY = _UxGT("Estender"); + PROGMEM Language_Str MSG_BLTOUCH_SW_MODE = _UxGT("Modo Software"); + PROGMEM Language_Str MSG_BLTOUCH_5V_MODE = _UxGT("Modo 5V"); + PROGMEM Language_Str MSG_BLTOUCH_OD_MODE = _UxGT("Modo OD"); + PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE = _UxGT("Modo Almacenar"); PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE_5V = _UxGT("Axustar BLTouch a 5V"); PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE_OD = _UxGT("Axustar BLTouch a OD"); PROGMEM Language_Str MSG_BLTOUCH_MODE_ECHO = _UxGT("Modo de Informe"); diff --git a/Marlin/src/lcd/language/language_hu.h b/Marlin/src/lcd/language/language_hu.h index de38cb52da..d84155f419 100644 --- a/Marlin/src/lcd/language/language_hu.h +++ b/Marlin/src/lcd/language/language_hu.h @@ -409,14 +409,14 @@ namespace Language_hu { PROGMEM Language_Str MSG_ZPROBE_OUT = _UxGT("Z szonda tálcán kivül"); PROGMEM Language_Str MSG_SKEW_FACTOR = _UxGT("Ferdeség Faktor"); PROGMEM Language_Str MSG_BLTOUCH = _UxGT("BLTouch"); - PROGMEM Language_Str MSG_BLTOUCH_SELFTEST = _UxGT("Cmd: Önteszt"); - PROGMEM Language_Str MSG_BLTOUCH_RESET = _UxGT("Cmd: Visszaállítás"); - PROGMEM Language_Str MSG_BLTOUCH_STOW = _UxGT("Cmd: Elhelyez"); - PROGMEM Language_Str MSG_BLTOUCH_DEPLOY = _UxGT("Cmd: Telepít"); - PROGMEM Language_Str MSG_BLTOUCH_SW_MODE = _UxGT("Cmd: SW-Mód"); - PROGMEM Language_Str MSG_BLTOUCH_5V_MODE = _UxGT("Cmd: 5V-Mód"); - PROGMEM Language_Str MSG_BLTOUCH_OD_MODE = _UxGT("Cmd: OD-Mód"); - PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE = _UxGT("Cmd: Módok"); + PROGMEM Language_Str MSG_BLTOUCH_SELFTEST = _UxGT("Önteszt"); + PROGMEM Language_Str MSG_BLTOUCH_RESET = _UxGT("Visszaállítás"); + PROGMEM Language_Str MSG_BLTOUCH_STOW = _UxGT("Elhelyez"); + PROGMEM Language_Str MSG_BLTOUCH_DEPLOY = _UxGT("Telepít"); + PROGMEM Language_Str MSG_BLTOUCH_SW_MODE = _UxGT("SW-Mód"); + PROGMEM Language_Str MSG_BLTOUCH_5V_MODE = _UxGT("5V-Mód"); + PROGMEM Language_Str MSG_BLTOUCH_OD_MODE = _UxGT("OD-Mód"); + PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE = _UxGT("Módok"); PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE_5V = _UxGT("BLTouch 5V Mód"); PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE_OD = _UxGT("BLTouch OD Mód"); PROGMEM Language_Str MSG_BLTOUCH_MODE_ECHO = _UxGT("Jelentés"); diff --git a/Marlin/src/lcd/language/language_pl.h b/Marlin/src/lcd/language/language_pl.h index 9e77eb92d1..12bab23804 100644 --- a/Marlin/src/lcd/language/language_pl.h +++ b/Marlin/src/lcd/language/language_pl.h @@ -360,12 +360,12 @@ namespace Language_pl { PROGMEM Language_Str MSG_BLTOUCH = _UxGT("BLTouch"); PROGMEM Language_Str MSG_BLTOUCH_SELFTEST = _UxGT("BLTouch Self-Test"); PROGMEM Language_Str MSG_BLTOUCH_RESET = _UxGT("Reset BLTouch"); - PROGMEM Language_Str MSG_BLTOUCH_STOW = _UxGT("Cmd: Stow"); - PROGMEM Language_Str MSG_BLTOUCH_DEPLOY = _UxGT("Cmd: Deploy"); - PROGMEM Language_Str MSG_BLTOUCH_SW_MODE = _UxGT("Cmd: SW-Mode"); - PROGMEM Language_Str MSG_BLTOUCH_5V_MODE = _UxGT("Cmd: 5V-Mode"); - PROGMEM Language_Str MSG_BLTOUCH_OD_MODE = _UxGT("Cmd: OD-Mode"); - PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE = _UxGT("Cmd: Mode-Store"); + PROGMEM Language_Str MSG_BLTOUCH_STOW = _UxGT("Stow"); + PROGMEM Language_Str MSG_BLTOUCH_DEPLOY = _UxGT("Deploy"); + PROGMEM Language_Str MSG_BLTOUCH_SW_MODE = _UxGT("SW-Mode"); + PROGMEM Language_Str MSG_BLTOUCH_5V_MODE = _UxGT("5V-Mode"); + PROGMEM Language_Str MSG_BLTOUCH_OD_MODE = _UxGT("OD-Mode"); + PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE = _UxGT("Mode-Store"); PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE_5V = _UxGT("Set BLTouch to 5V"); PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE_OD = _UxGT("Set BLTouch to OD"); PROGMEM Language_Str MSG_BLTOUCH_MODE_ECHO = _UxGT("Report Drain"); diff --git a/Marlin/src/lcd/language/language_ro.h b/Marlin/src/lcd/language/language_ro.h index 51f1a00101..de9c1106de 100644 --- a/Marlin/src/lcd/language/language_ro.h +++ b/Marlin/src/lcd/language/language_ro.h @@ -412,14 +412,14 @@ namespace Language_ro { PROGMEM Language_Str MSG_ZPROBE_OUT = _UxGT("Z Probe Past Bed"); PROGMEM Language_Str MSG_SKEW_FACTOR = _UxGT("Skew Factor"); PROGMEM Language_Str MSG_BLTOUCH = _UxGT("BLTouch"); - PROGMEM Language_Str MSG_BLTOUCH_SELFTEST = _UxGT("Cmd: Self-Test"); - PROGMEM Language_Str MSG_BLTOUCH_RESET = _UxGT("Cmd: Reset"); - PROGMEM Language_Str MSG_BLTOUCH_STOW = _UxGT("Cmd: Stow"); - PROGMEM Language_Str MSG_BLTOUCH_DEPLOY = _UxGT("Cmd: Deploy"); - PROGMEM Language_Str MSG_BLTOUCH_SW_MODE = _UxGT("Cmd: SW-Mode"); - PROGMEM Language_Str MSG_BLTOUCH_5V_MODE = _UxGT("Cmd: 5V-Mode"); - PROGMEM Language_Str MSG_BLTOUCH_OD_MODE = _UxGT("Cmd: OD-Mode"); - PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE = _UxGT("Cmd: Mode-Store"); + PROGMEM Language_Str MSG_BLTOUCH_SELFTEST = _UxGT("Self-Test"); + PROGMEM Language_Str MSG_BLTOUCH_RESET = _UxGT("Reset"); + PROGMEM Language_Str MSG_BLTOUCH_STOW = _UxGT("Stow"); + PROGMEM Language_Str MSG_BLTOUCH_DEPLOY = _UxGT("Deploy"); + PROGMEM Language_Str MSG_BLTOUCH_SW_MODE = _UxGT("SW-Mode"); + PROGMEM Language_Str MSG_BLTOUCH_5V_MODE = _UxGT("5V-Mode"); + PROGMEM Language_Str MSG_BLTOUCH_OD_MODE = _UxGT("OD-Mode"); + PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE = _UxGT("Mode-Store"); PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE_5V = _UxGT("Set BLTouch to 5V"); PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE_OD = _UxGT("Set BLTouch to OD"); PROGMEM Language_Str MSG_BLTOUCH_MODE_ECHO = _UxGT("Report Drain"); diff --git a/Marlin/src/lcd/language/language_sk.h b/Marlin/src/lcd/language/language_sk.h index a4c47951f1..982803b173 100644 --- a/Marlin/src/lcd/language/language_sk.h +++ b/Marlin/src/lcd/language/language_sk.h @@ -400,14 +400,14 @@ namespace Language_sk { PROGMEM Language_Str MSG_ZPROBE_OUT = _UxGT("Sonda Z mimo podl."); PROGMEM Language_Str MSG_SKEW_FACTOR = _UxGT("Faktor skosenia"); PROGMEM Language_Str MSG_BLTOUCH = _UxGT("BLTouch"); - PROGMEM Language_Str MSG_BLTOUCH_SELFTEST = _UxGT("Cmd: Self-Test"); - PROGMEM Language_Str MSG_BLTOUCH_RESET = _UxGT("Cmd: Reset"); - PROGMEM Language_Str MSG_BLTOUCH_STOW = _UxGT("Cmd: Zasunúť"); - PROGMEM Language_Str MSG_BLTOUCH_DEPLOY = _UxGT("Cmd: Vysunúť"); - PROGMEM Language_Str MSG_BLTOUCH_SW_MODE = _UxGT("Cmd: Režim SW"); - PROGMEM Language_Str MSG_BLTOUCH_5V_MODE = _UxGT("Cmd: Režim 5V"); - PROGMEM Language_Str MSG_BLTOUCH_OD_MODE = _UxGT("Cmd: Režim OD"); - PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE = _UxGT("Cmd: Ulož. režim"); + PROGMEM Language_Str MSG_BLTOUCH_SELFTEST = _UxGT("Self-Test"); + PROGMEM Language_Str MSG_BLTOUCH_RESET = _UxGT("Reset"); + PROGMEM Language_Str MSG_BLTOUCH_STOW = _UxGT("Zasunúť"); + PROGMEM Language_Str MSG_BLTOUCH_DEPLOY = _UxGT("Vysunúť"); + PROGMEM Language_Str MSG_BLTOUCH_SW_MODE = _UxGT("Režim SW"); + PROGMEM Language_Str MSG_BLTOUCH_5V_MODE = _UxGT("Režim 5V"); + PROGMEM Language_Str MSG_BLTOUCH_OD_MODE = _UxGT("Režim OD"); + PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE = _UxGT("Ulož. režim"); PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE_5V = _UxGT("Prepnúť do 5V"); PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE_OD = _UxGT("Prepnúť do OD"); PROGMEM Language_Str MSG_BLTOUCH_MODE_ECHO = _UxGT("Zobraziť režim"); diff --git a/Marlin/src/lcd/language/language_tr.h b/Marlin/src/lcd/language/language_tr.h index 9ff62d70d6..484ece89d5 100644 --- a/Marlin/src/lcd/language/language_tr.h +++ b/Marlin/src/lcd/language/language_tr.h @@ -385,13 +385,13 @@ namespace Language_tr { PROGMEM Language_Str MSG_SKEW_FACTOR = _UxGT("Çarpıklık Faktörü"); PROGMEM Language_Str MSG_BLTOUCH = _UxGT("BLTouch"); PROGMEM Language_Str MSG_BLTOUCH_SELFTEST = _UxGT("BLTouch K. Test"); - PROGMEM Language_Str MSG_BLTOUCH_RESET = _UxGT("Cmd: Reset"); - PROGMEM Language_Str MSG_BLTOUCH_STOW = _UxGT("Cmd: Kapat"); - PROGMEM Language_Str MSG_BLTOUCH_DEPLOY = _UxGT("Cmd: Aç"); - PROGMEM Language_Str MSG_BLTOUCH_SW_MODE = _UxGT("Cmd: SW-Modu"); - PROGMEM Language_Str MSG_BLTOUCH_5V_MODE = _UxGT("Cmd: 5V-Modu"); - PROGMEM Language_Str MSG_BLTOUCH_OD_MODE = _UxGT("Cmd: OD-Modu"); - PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE = _UxGT("Cmd: Mode-Store"); + PROGMEM Language_Str MSG_BLTOUCH_RESET = _UxGT("Reset"); + PROGMEM Language_Str MSG_BLTOUCH_STOW = _UxGT("Kapat"); + PROGMEM Language_Str MSG_BLTOUCH_DEPLOY = _UxGT("Aç"); + PROGMEM Language_Str MSG_BLTOUCH_SW_MODE = _UxGT("SW-Modu"); + PROGMEM Language_Str MSG_BLTOUCH_5V_MODE = _UxGT("5V-Modu"); + PROGMEM Language_Str MSG_BLTOUCH_OD_MODE = _UxGT("OD-Modu"); + PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE = _UxGT("Mode-Store"); PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE_5V = _UxGT("BLTouch 5V Ayarla"); PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE_OD = _UxGT("BLTouch OD Ayarla"); PROGMEM Language_Str MSG_BLTOUCH_MODE_ECHO = _UxGT("Drenaj Raporu"); diff --git a/Marlin/src/lcd/language/language_zh_CN.h b/Marlin/src/lcd/language/language_zh_CN.h index 512d77aa22..d0fd130a93 100644 --- a/Marlin/src/lcd/language/language_zh_CN.h +++ b/Marlin/src/lcd/language/language_zh_CN.h @@ -411,14 +411,14 @@ namespace Language_zh_CN { PROGMEM Language_Str MSG_ZPROBE_OUT = _UxGT("Z探针在热床之外"); //"Z probe out. bed" Z probe is not within the physical limits PROGMEM Language_Str MSG_SKEW_FACTOR = _UxGT("偏斜因数"); // "Skew Factor" PROGMEM Language_Str MSG_BLTOUCH = _UxGT("BLTouch"); // "BLTouch" - PROGMEM Language_Str MSG_BLTOUCH_SELFTEST = _UxGT("Cmd: 自检"); - PROGMEM Language_Str MSG_BLTOUCH_RESET = _UxGT("Cmd: 重置"); - PROGMEM Language_Str MSG_BLTOUCH_STOW = _UxGT("Cmd: 装载"); - PROGMEM Language_Str MSG_BLTOUCH_DEPLOY = _UxGT("Cmd: 部署"); - PROGMEM Language_Str MSG_BLTOUCH_SW_MODE = _UxGT("Cmd: SW模式"); - PROGMEM Language_Str MSG_BLTOUCH_5V_MODE = _UxGT("Cmd: 5V模式"); - PROGMEM Language_Str MSG_BLTOUCH_OD_MODE = _UxGT("Cmd: OD模式"); - PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE = _UxGT("Cmd: 模式保存"); + PROGMEM Language_Str MSG_BLTOUCH_SELFTEST = _UxGT("自检"); + PROGMEM Language_Str MSG_BLTOUCH_RESET = _UxGT("重置"); + PROGMEM Language_Str MSG_BLTOUCH_STOW = _UxGT("装载"); + PROGMEM Language_Str MSG_BLTOUCH_DEPLOY = _UxGT("部署"); + PROGMEM Language_Str MSG_BLTOUCH_SW_MODE = _UxGT("SW模式"); + PROGMEM Language_Str MSG_BLTOUCH_5V_MODE = _UxGT("5V模式"); + PROGMEM Language_Str MSG_BLTOUCH_OD_MODE = _UxGT("OD模式"); + PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE = _UxGT("模式保存"); PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE_5V = _UxGT("设置BLTouch为5V"); PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE_OD = _UxGT("设置BLTouch为OD"); PROGMEM Language_Str MSG_BLTOUCH_MODE_ECHO = _UxGT("报告Drain");