MPCNC/Firmware2
1
0
Fork 0
Code Issues 1 Pull Requests Releases Wiki Activity

Enhance IDEX toolchange auto-return w/ no park, full control (#14117)

Browse Source
This commit is contained in:
InsanityAutomation 2019-06-23 21:00:48 -04:00 committed by Scott Lahteine
parent 3d9d72e8db
commit aa0383a83b
92 changed files with 137 additions and 42 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
Marlin/Configuration_adv.h
View File

@ -1435,6 +1435,7 @@
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
//#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP

4
Marlin/src/gcode/calibrate/G28.cpp
View File

@ -242,7 +242,7 @@ void GcodeSuite::G28(const bool always_home_all) {
#if DISABLED(DELTA) || ENABLED(DELTA_HOME_TO_SAFE_ZONE)
const uint8_t old_tool_index = active_extruder;
#endif
tool_change(0, 0, true);
tool_change(0, true);
#endif
#if HAS_DUPLICATION_MODE
@ -428,7 +428,7 @@ void GcodeSuite::G28(const bool always_home_all) {
#else
#define NO_FETCH true
#endif
tool_change(old_tool_index, 0, NO_FETCH);
tool_change(old_tool_index, NO_FETCH);
#endif
ui.refresh();

4
Marlin/src/gcode/calibrate/G33.cpp
View File

@ -80,7 +80,7 @@ void ac_home() {
void ac_setup(const bool reset_bed) {
#if HOTENDS > 1
tool_change(0, 0, true);
tool_change(0, true);
#endif
planner.synchronize();
@ -104,7 +104,7 @@ void ac_cleanup(
#endif
clean_up_after_endstop_or_probe_move();
#if HOTENDS > 1
tool_change(old_tool_index, 0, true);
tool_change(old_tool_index, true);
#endif
}

4
Marlin/src/gcode/calibrate/G34_M422.cpp
View File

@ -109,7 +109,7 @@ void GcodeSuite::G34() {
// Always home with tool 0 active
#if HOTENDS > 1
const uint8_t old_tool_index = active_extruder;
tool_change(0, 0, true);
tool_change(0, true);
#endif
#if HAS_DUPLICATION_MODE
@ -263,7 +263,7 @@ void GcodeSuite::G34() {
// Restore the active tool after homing
#if HOTENDS > 1
tool_change(old_tool_index, 0, (
tool_change(old_tool_index, (
#if ENABLED(PARKING_EXTRUDER)
false // Fetch the previous toolhead
#else

1
Marlin/src/gcode/control/T.cpp
View File

@ -68,7 +68,6 @@ void GcodeSuite::T(const uint8_t tool_index) {
tool_change(
tool_index,
MMM_TO_MMS(parser.linearval('F')),
(tool_index == active_extruder) || parser.boolval('S')
);

4
Marlin/src/gcode/feature/pause/M600.cpp
View File

@ -109,7 +109,7 @@ void GcodeSuite::M600() {
#if ENABLED(DUAL_X_CARRIAGE)
&& dual_x_carriage_mode != DXC_DUPLICATION_MODE && dual_x_carriage_mode != DXC_MIRRORED_MODE
#endif
) tool_change(target_extruder, 0, false);
) tool_change(target_extruder, false);
#endif
// Initial retract before move to filament change position
@ -170,7 +170,7 @@ void GcodeSuite::M600() {
#if EXTRUDERS > 1
// Restore toolhead if it was changed
if (active_extruder_before_filament_change != active_extruder)
tool_change(active_extruder_before_filament_change, 0, false);
tool_change(active_extruder_before_filament_change, false);
#endif
#if ENABLED(MIXING_EXTRUDER)

10
Marlin/src/gcode/feature/pause/M701_M702.cpp
View File

@ -92,7 +92,7 @@ void GcodeSuite::M701() {
// Change toolhead if specified
uint8_t active_extruder_before_filament_change = active_extruder;
if (active_extruder != target_extruder)
tool_change(target_extruder, 0, false);
tool_change(target_extruder, false);
#endif
// Lift Z axis
@ -121,7 +121,7 @@ void GcodeSuite::M701() {
#if EXTRUDERS > 1 && DISABLED(PRUSA_MMU2)
// Restore toolhead if it was changed
if (active_extruder_before_filament_change != active_extruder)
tool_change(active_extruder_before_filament_change, 0, false);
tool_change(active_extruder_before_filament_change, false);
#endif
#if ENABLED(MIXING_EXTRUDER)
@ -191,7 +191,7 @@ void GcodeSuite::M702() {
// Change toolhead if specified
uint8_t active_extruder_before_filament_change = active_extruder;
if (active_extruder != target_extruder)
tool_change(target_extruder, 0, false);
tool_change(target_extruder, false);
#endif
// Lift Z axis
@ -205,7 +205,7 @@ void GcodeSuite::M702() {
#if EXTRUDERS > 1 && ENABLED(FILAMENT_UNLOAD_ALL_EXTRUDERS)
if (!parser.seenval('T')) {
HOTEND_LOOP() {
if (e != active_extruder) tool_change(e, 0, false);
if (e != active_extruder) tool_change(e, false);
unload_filament(-fc_settings[e].unload_length, true, PAUSE_MODE_UNLOAD_FILAMENT);
}
}
@ -231,7 +231,7 @@ void GcodeSuite::M702() {
#if EXTRUDERS > 1 && DISABLED(PRUSA_MMU2)
// Restore toolhead if it was changed
if (active_extruder_before_filament_change != active_extruder)
tool_change(active_extruder_before_filament_change, 0, false);
tool_change(active_extruder_before_filament_change, false);
#endif
#if ENABLED(MIXING_EXTRUDER)

2
Marlin/src/lcd/extensible_ui/ui_api.cpp
View File

@ -350,7 +350,7 @@ namespace ExtUI {
#if EXTRUDERS > 1
const uint8_t e = extruder - E0;
#if DO_SWITCH_EXTRUDER || EITHER(SWITCHING_NOZZLE, PARKING_EXTRUDER)
if (e != active_extruder) tool_change(e, 0, no_move);
if (e != active_extruder) tool_change(e, no_move);
#endif
active_extruder = e;
#endif

65
Marlin/src/module/tool_change.cpp
View File

@ -365,7 +365,7 @@ inline void fast_line_to_current(const AxisEnum fr_axis) {
#if ENABLED(SWITCHING_TOOLHEAD)
inline void switching_toolhead_tool_change(const uint8_t tmp_extruder, const float fr_mm_s/*=0.0*/, bool no_move/*=false*/) {
inline void switching_toolhead_tool_change(const uint8_t tmp_extruder, bool no_move/*=false*/) {
if (no_move) return;
constexpr uint16_t angles[2] = SWITCHING_TOOLHEAD_SERVO_ANGLES;
@ -469,7 +469,7 @@ inline void fast_line_to_current(const AxisEnum fr_axis) {
#if ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
inline void magnetic_switching_toolhead_tool_change(const uint8_t tmp_extruder, const float fr_mm_s/*=0.0*/, bool no_move/*=false*/) {
inline void magnetic_switching_toolhead_tool_change(const uint8_t tmp_extruder, bool no_move/*=false*/) {
if (no_move) return;
const float toolheadposx[] = SWITCHING_TOOLHEAD_X_POS,
@ -653,7 +653,7 @@ inline void invalid_extruder_error(const uint8_t e) {
* Perform a tool-change, which may result in moving the
* previous tool out of the way and the new tool into place.
*/
void tool_change(const uint8_t tmp_extruder, const float fr_mm_s/*=0.0*/, bool no_move/*=false*/) {
void tool_change(const uint8_t tmp_extruder, bool no_move/*=false*/) {
#if ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
if (tmp_extruder == active_extruder) return;
@ -661,7 +661,7 @@ void tool_change(const uint8_t tmp_extruder, const float fr_mm_s/*=0.0*/, bool n
#if ENABLED(MIXING_EXTRUDER)
UNUSED(fr_mm_s); UNUSED(no_move);
UNUSED(no_move);
if (tmp_extruder >= MIXING_VIRTUAL_TOOLS)
return invalid_extruder_error(tmp_extruder);
@ -673,13 +673,13 @@ void tool_change(const uint8_t tmp_extruder, const float fr_mm_s/*=0.0*/, bool n
#elif ENABLED(PRUSA_MMU2)
UNUSED(fr_mm_s); UNUSED(no_move);
UNUSED(no_move);
mmu2.tool_change(tmp_extruder);
#elif EXTRUDERS < 2
UNUSED(fr_mm_s); UNUSED(no_move);
UNUSED(no_move);
if (tmp_extruder) invalid_extruder_error(tmp_extruder);
return;
@ -702,21 +702,25 @@ void tool_change(const uint8_t tmp_extruder, const float fr_mm_s/*=0.0*/, bool n
if (tmp_extruder >= EXTRUDERS)
return invalid_extruder_error(tmp_extruder);
if (!no_move && (!all_axes_homed()
#if ENABLED(DUAL_X_CARRIAGE)
|| dual_x_carriage_mode == DXC_FULL_CONTROL_MODE
#endif
)) {
if (!no_move && !all_axes_homed()) {
no_move = true;
if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPGM("No move on toolchange");
if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPGM("No move (not homed)");
}
#if HAS_LCD_MENU
ui.return_to_status();
#endif
#if ENABLED(DUAL_X_CARRIAGE)
const bool idex_full_control = dual_x_carriage_mode == DXC_FULL_CONTROL_MODE;
#else
constexpr bool idex_full_control = false;
#endif
const bool can_move_away = !no_move && !idex_full_control;
#if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
const bool should_swap = !no_move && toolchange_settings.swap_length;
const bool should_swap = can_move_away && toolchange_settings.swap_length;
#if ENABLED(PREVENT_COLD_EXTRUSION)
const bool too_cold = !DEBUGGING(DRYRUN) && (thermalManager.targetTooColdToExtrude(active_extruder) || thermalManager.targetTooColdToExtrude(tmp_extruder));
#else
@ -736,6 +740,7 @@ void tool_change(const uint8_t tmp_extruder, const float fr_mm_s/*=0.0*/, bool n
#else
current_position[E_AXIS] -= toolchange_settings.swap_length / planner.e_factor[active_extruder];
planner.buffer_line(current_position, MMM_TO_MMS(toolchange_settings.retract_speed), active_extruder);
planner.synchronize();
#endif
}
}
@ -747,8 +752,7 @@ void tool_change(const uint8_t tmp_extruder, const float fr_mm_s/*=0.0*/, bool n
raise_nozzle(active_extruder);
#endif
const float old_feedrate_mm_s = fr_mm_s > 0.0 ? fr_mm_s : feedrate_mm_s;
feedrate_mm_s = fr_mm_s > 0.0 ? fr_mm_s : XY_PROBE_FEEDRATE_MM_S;
REMEMBER(fr, feedrate_mm_s, XY_PROBE_FEEDRATE_MM_S);
#if HAS_SOFTWARE_ENDSTOPS
#if HAS_HOTEND_OFFSET
@ -765,8 +769,8 @@ void tool_change(const uint8_t tmp_extruder, const float fr_mm_s/*=0.0*/, bool n
set_destination_from_current();
if (!no_move) {
#if DISABLED(SWITCHING_NOZZLE)
#if DISABLED(SWITCHING_NOZZLE)
if (can_move_away) {
// Do a small lift to avoid the workpiece in the move back (below)
current_position[Z_AXIS] += toolchange_settings.z_raise;
#if HAS_SOFTWARE_ENDSTOPS
@ -778,9 +782,9 @@ void tool_change(const uint8_t tmp_extruder, const float fr_mm_s/*=0.0*/, bool n
current_position[Y_AXIS] = toolchange_settings.change_point.y;
#endif
planner.buffer_line(current_position, feedrate_mm_s, active_extruder);
#endif
planner.synchronize();
}
planner.synchronize();
}
#endif
#if HAS_HOTEND_OFFSET
#if ENABLED(DUAL_X_CARRIAGE)
@ -801,9 +805,9 @@ void tool_change(const uint8_t tmp_extruder, const float fr_mm_s/*=0.0*/, bool n
#elif ENABLED(MAGNETIC_PARKING_EXTRUDER) // Magnetic Parking extruder
magnetic_parking_extruder_tool_change(tmp_extruder);
#elif ENABLED(SWITCHING_TOOLHEAD) // Switching Toolhead
switching_toolhead_tool_change(tmp_extruder, fr_mm_s, no_move);
switching_toolhead_tool_change(tmp_extruder, no_move);
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) // Magnetic Switching Toolhead
magnetic_switching_toolhead_tool_change(tmp_extruder, fr_mm_s, no_move);
magnetic_switching_toolhead_tool_change(tmp_extruder, no_move);
#elif ENABLED(SWITCHING_NOZZLE) && !SWITCHING_NOZZLE_TWO_SERVOS
// Raise by a configured distance to avoid workpiece, except with
// SWITCHING_NOZZLE_TWO_SERVOS, as both nozzles will lift instead.
@ -837,7 +841,6 @@ void tool_change(const uint8_t tmp_extruder, const float fr_mm_s/*=0.0*/, bool n
// Return to position and lower again
if (safe_to_move && !no_move && IsRunning()) {
if (DEBUGGING(LEVELING)) DEBUG_POS("Move back", destination);
#if ENABLED(SINGLENOZZLE)
#if FAN_COUNT > 0
@ -884,13 +887,23 @@ void tool_change(const uint8_t tmp_extruder, const float fr_mm_s/*=0.0*/, bool n
apply_motion_limits(destination);
#endif
// Move back to the original (or tweaked) position
do_blocking_move_to(destination);
// Should the nozzle move back to the old position?
if (can_move_away) {
#if ENABLED(TOOLCHANGE_NO_RETURN)
// Just move back down
if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPGM("Move back Z only");
do_blocking_move_to_z(destination[Z_AXIS], planner.settings.max_feedrate_mm_s[Z_AXIS]);
#else
// Move back to the original (or adjusted) position
if (DEBUGGING(LEVELING)) DEBUG_POS("Move back", destination);
do_blocking_move_to(destination);
#endif
}
else if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPGM("Move back skipped");
#if ENABLED(DUAL_X_CARRIAGE)
active_extruder_parked = false;
#endif
feedrate_mm_s = old_feedrate_mm_s;
}
#if ENABLED(SWITCHING_NOZZLE)
else {

2
Marlin/src/module/tool_change.h
View File

@ -96,4 +96,4 @@
* Perform a tool-change, which may result in moving the
* previous tool out of the way and the new tool into place.
*/
void tool_change(const uint8_t tmp_extruder, const float fr_mm_s=0.0, bool no_move=false);
void tool_change(const uint8_t tmp_extruder, bool no_move=false);

1
config/default/Configuration_adv.h
View File

@ -1435,6 +1435,7 @@
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
//#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP

1
config/examples/3DFabXYZ/Migbot/Configuration_adv.h
View File

@ -1435,6 +1435,7 @@
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
//#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP

1
config/examples/AlephObjects/TAZ4/Configuration_adv.h
View File

@ -1435,6 +1435,7 @@
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
//#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP

1
config/examples/AliExpress/UM2pExt/Configuration_adv.h
View File

@ -1435,6 +1435,7 @@
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
//#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP

1
config/examples/Anet/A2/Configuration_adv.h
View File

@ -1435,6 +1435,7 @@
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
//#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP

1
config/examples/Anet/A2plus/Configuration_adv.h
View File

@ -1435,6 +1435,7 @@
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
//#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP

1
config/examples/Anet/A6/Configuration_adv.h
View File

@ -1435,6 +1435,7 @@
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
//#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP

1
config/examples/Anet/A8/Configuration_adv.h
View File

@ -1435,6 +1435,7 @@
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
//#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP

1
config/examples/Anet/A8plus/Configuration_adv.h
View File

@ -1435,6 +1435,7 @@
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
//#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP

1
config/examples/Anet/E16/Configuration_adv.h
View File

@ -1435,6 +1435,7 @@
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
//#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP

1
config/examples/AnyCubic/i3/Configuration_adv.h
View File

@ -1435,6 +1435,7 @@
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
//#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP

1
config/examples/ArmEd/Configuration_adv.h
View File

@ -1439,6 +1439,7 @@
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
//#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP

1
config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
View File

@ -1435,6 +1435,7 @@
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
//#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP

1
config/examples/BIBO/TouchX/default/Configuration_adv.h
View File

@ -1435,6 +1435,7 @@
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
//#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP

1
config/examples/BQ/Hephestos/Configuration_adv.h
View File

@ -1435,6 +1435,7 @@
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
//#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP

1
config/examples/BQ/Hephestos_2/Configuration_adv.h
View File

@ -1443,6 +1443,7 @@
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
//#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP

1
config/examples/BQ/WITBOX/Configuration_adv.h
View File

@ -1435,6 +1435,7 @@
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
//#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP

1
config/examples/Cartesio/Configuration_adv.h
View File

@ -1435,6 +1435,7 @@
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
//#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP

1
config/examples/Creality/CR-10/Configuration_adv.h
View File

@ -1435,6 +1435,7 @@
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
//#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP

1
config/examples/Creality/CR-10S/Configuration_adv.h
View File

@ -1435,6 +1435,7 @@
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
//#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP

1
config/examples/Creality/CR-10_5S/Configuration_adv.h
View File

@ -1435,6 +1435,7 @@
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
//#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP

1
config/examples/Creality/CR-10mini/Configuration_adv.h
View File

@ -1435,6 +1435,7 @@
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
//#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP

1
config/examples/Creality/CR-8/Configuration_adv.h
View File

@ -1435,6 +1435,7 @@
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
//#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP

1
config/examples/Creality/Ender-2/Configuration_adv.h
View File

@ -1435,6 +1435,7 @@
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
//#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP

1
config/examples/Creality/Ender-3/Configuration_adv.h
View File

@ -1435,6 +1435,7 @@
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
//#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP

1
config/examples/Creality/Ender-4/Configuration_adv.h
View File

@ -1435,6 +1435,7 @@
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
//#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP

1
config/examples/Dagoma/Disco Ultimate/Configuration_adv.h
View File

@ -1435,6 +1435,7 @@
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
//#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP

1
config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h
View File

@ -1435,6 +1435,7 @@
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
//#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP

1
config/examples/Einstart-S/Configuration_adv.h
View File

@ -1435,6 +1435,7 @@
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
//#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP

1
config/examples/Felix/Configuration_adv.h
View File

@ -1435,6 +1435,7 @@
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
//#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP

1
config/examples/FlashForge/CreatorPro/Configuration_adv.h
View File

@ -1434,6 +1434,7 @@
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 0 // (mm)
//#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP

1
config/examples/FolgerTech/i3-2020/Configuration_adv.h
View File

@ -1435,6 +1435,7 @@
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
//#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP

1
config/examples/Formbot/Raptor/Configuration_adv.h
View File

@ -1437,6 +1437,7 @@
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
//#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP

1
config/examples/Formbot/T_Rex_2+/Configuration_adv.h
View File

@ -1439,6 +1439,7 @@
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
//#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP

1
config/examples/Formbot/T_Rex_3/Configuration_adv.h
View File

@ -1439,6 +1439,7 @@
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
//#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP

1
config/examples/Geeetech/A10/Configuration_adv.h
View File

@ -1435,6 +1435,7 @@
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
//#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP

1
config/examples/Geeetech/A10M/Configuration_adv.h
View File

@ -1435,6 +1435,7 @@
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
//#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP

1
config/examples/Geeetech/A20M/Configuration_adv.h
View File

@ -1435,6 +1435,7 @@
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
//#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP

1
config/examples/Geeetech/MeCreator2/Configuration_adv.h
View File

@ -1434,6 +1434,7 @@
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
//#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP

1
config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h
View File

@ -1435,6 +1435,7 @@
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
//#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP

1
config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h
View File

@ -1435,6 +1435,7 @@
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
//#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP

1
config/examples/Infitary/i3-M508/Configuration_adv.h
View File

@ -1435,6 +1435,7 @@
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
//#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP

1
config/examples/JGAurora/A1/Configuration_adv.h
View File

@ -1440,6 +1440,7 @@
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
//#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP

1
config/examples/JGAurora/A5/Configuration_adv.h
View File

@ -1435,6 +1435,7 @@
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
//#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP

1
config/examples/JGAurora/A5S/Configuration_adv.h
View File

@ -1440,6 +1440,7 @@
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
//#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP

1
config/examples/MakerParts/Configuration_adv.h
View File

@ -1435,6 +1435,7 @@
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
//#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP

1
config/examples/Malyan/M150/Configuration_adv.h
View File

@ -1435,6 +1435,7 @@
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
//#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP

1
config/examples/Malyan/M200/Configuration_adv.h
View File

@ -1435,6 +1435,7 @@
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
//#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP

1
config/examples/Micromake/C1/enhanced/Configuration_adv.h
View File

@ -1435,6 +1435,7 @@
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
//#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP

1
config/examples/Mks/Robin/Configuration_adv.h
View File

@ -1435,6 +1435,7 @@
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
//#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP

1
config/examples/Mks/Sbase/Configuration_adv.h
View File

@ -1436,6 +1436,7 @@
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
//#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP

1
config/examples/RapideLite/RL200/Configuration_adv.h
View File

@ -1435,6 +1435,7 @@
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
//#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP

1
config/examples/RigidBot/Configuration_adv.h
View File

@ -1435,6 +1435,7 @@
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
//#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP

1
config/examples/SCARA/Configuration_adv.h
View File

@ -1435,6 +1435,7 @@
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
//#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP

1
config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h
View File

@ -1435,6 +1435,7 @@
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
//#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP

1
config/examples/Sanguinololu/Configuration_adv.h
View File

@ -1435,6 +1435,7 @@
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
//#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP

1
config/examples/Tevo/Tarantula Pro/Configuration_adv.h
View File

@ -1431,6 +1431,7 @@
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
//#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP

1
config/examples/TheBorg/Configuration_adv.h
View File

@ -1435,6 +1435,7 @@
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
//#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP

1
config/examples/TinyBoy2/Configuration_adv.h
View File

@ -1435,6 +1435,7 @@
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
//#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP

1
config/examples/Tronxy/X3A/Configuration_adv.h
View File

@ -1435,6 +1435,7 @@
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
//#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP

1
config/examples/Tronxy/X5S-2E/Configuration_adv.h
View File

@ -1435,6 +1435,7 @@
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
//#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP

1
config/examples/UltiMachine/Archim1/Configuration_adv.h
View File

@ -1435,6 +1435,7 @@
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
//#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP

1
config/examples/UltiMachine/Archim2/Configuration_adv.h
View File

@ -1435,6 +1435,7 @@
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
//#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP

1
config/examples/VORONDesign/Configuration_adv.h
View File

@ -1435,6 +1435,7 @@
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
//#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP

1
config/examples/Velleman/K8200/Configuration_adv.h
View File

@ -1448,6 +1448,7 @@
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
//#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP

1
config/examples/Velleman/K8400/Configuration_adv.h
View File

@ -1435,6 +1435,7 @@
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
//#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP

1
config/examples/WASP/PowerWASP/Configuration_adv.h
View File

@ -1435,6 +1435,7 @@
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
//#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP

1
config/examples/Wanhao/Duplicator 6/Configuration_adv.h
View File

@ -1437,6 +1437,7 @@
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
//#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP

1
config/examples/delta/Anycubic/Kossel/Configuration_adv.h
View File

@ -1437,6 +1437,7 @@
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
//#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP

1
config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
View File

@ -1437,6 +1437,7 @@
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
//#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP

1
config/examples/delta/FLSUN/kossel/Configuration_adv.h
View File

@ -1437,6 +1437,7 @@
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
//#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP

1
config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
View File

@ -1437,6 +1437,7 @@
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
//#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP

1
config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h
View File

@ -1437,6 +1437,7 @@
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
//#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP

1
config/examples/delta/MKS/SBASE/Configuration_adv.h
View File

@ -1437,6 +1437,7 @@
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
//#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP

1
config/examples/delta/Tevo Little Monster/Configuration_adv.h
View File

@ -1437,6 +1437,7 @@
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
//#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP

1
config/examples/delta/generic/Configuration_adv.h
View File

@ -1437,6 +1437,7 @@
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
//#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP

1
config/examples/delta/kossel_mini/Configuration_adv.h
View File

@ -1437,6 +1437,7 @@
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
//#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP

1
config/examples/delta/kossel_xl/Configuration_adv.h
View File

@ -1437,6 +1437,7 @@
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
//#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP

1
config/examples/gCreate/gMax1.5+/Configuration_adv.h
View File

@ -1435,6 +1435,7 @@
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
//#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP

1
config/examples/makibox/Configuration_adv.h
View File

@ -1435,6 +1435,7 @@
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
//#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP

1
config/examples/tvrrug/Round2/Configuration_adv.h
View File

@ -1435,6 +1435,7 @@
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
//#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP

1
config/examples/wt150/Configuration_adv.h
View File

@ -1436,6 +1436,7 @@
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
//#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP