MPCNC/Firmware2
1
0
Fork 0
Code Issues 1 Pull Requests Releases Wiki Activity

🐛 Fix M140 print job timer autostart (#22046)

Browse Source
This commit is contained in:
Taylor Talkington 2021-06-05 00:01:06 -04:00 committed by Scott Lahteine
parent 04bea72787
commit aeb8097cbc
1 changed files with 13 additions and 4 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

17
Marlin/Configuration.h
View File

@ -1824,11 +1824,20 @@
/**
* Print Job Timer
*
* Automatically start and stop the print job timer on M104/M109/M190.
* Automatically start and stop the print job timer on M104/M109/M140/M190/M141/M191.
* The print job timer will only be stopped if the bed/chamber target temp is
* below BED_MINTEMP/CHAMBER_MINTEMP.
*
* M104 (hotend, no wait) - high temp = none, low temp = stop timer
* M109 (hotend, wait) - high temp = start timer, low temp = stop timer
* M190 (bed, wait) - high temp = start timer, low temp = none
* M104 (hotend, no wait) - high temp = none, low temp = stop timer
* M109 (hotend, wait) - high temp = start timer, low temp = stop timer
* M140 (bed, no wait) - high temp = none, low temp = stop timer
* M190 (bed, wait) - high temp = start timer, low temp = none
* M141 (chamber, no wait) - high temp = none, low temp = stop timer
* M191 (chamber, wait) - high temp = start timer, low temp = none
*
* For M104/M109, high temp is anything over EXTRUDE_MINTEMP / 2.
* For M140/M190, high temp is anything over BED_MINTEMP.
* For M141/M191, high temp is anything over CHAMBER_MINTEMP.
*
* The timer can also be controlled with the following commands:
*