Add XON/XOFF options to example configs

This commit is contained in:
Scott Lahteine 2017-10-02 02:47:48 -05:00
parent 33c4d45f2f
commit af15383578
66 changed files with 741 additions and 66 deletions

View File

@ -108,8 +108,9 @@
* *
* 250000 works in most cases, but you might try a lower speed if * 250000 works in most cases, but you might try a lower speed if
* you commonly experience drop-outs during host printing. * you commonly experience drop-outs during host printing.
* You may try up to 1000000 to speed up SD file transfer.
* *
* :[2400, 9600, 19200, 38400, 57600, 115200, 250000] * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
*/ */
#define BAUDRATE 250000 #define BAUDRATE 250000

View File

@ -751,7 +751,7 @@
#define MAX_CMD_SIZE 96 #define MAX_CMD_SIZE 96
#define BUFSIZE 4 #define BUFSIZE 4
// Transfer Buffer Size // Transmission to Host Buffer Size
// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. // To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0.
// To buffer a simple "ok" you need 4 bytes. // To buffer a simple "ok" you need 4 bytes.
// For ADVANCED_OK (M105) you need 32 bytes. // For ADVANCED_OK (M105) you need 32 bytes.
@ -760,6 +760,28 @@
// :[0, 2, 4, 8, 16, 32, 64, 128, 256] // :[0, 2, 4, 8, 16, 32, 64, 128, 256]
#define TX_BUFFER_SIZE 0 #define TX_BUFFER_SIZE 0
// Host Receive Buffer Size
// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough.
// To use flow control, set this buffer size to at least 1024 bytes.
// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048]
//#define RX_BUFFER_SIZE 1024
#if RX_BUFFER_SIZE >= 1024
// Enable to have the controller send XON/XOFF control characters to
// the host to signal the RX buffer is becoming full.
//#define SERIAL_XON_XOFF
#endif
#if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD.
//#define SERIAL_STATS_MAX_RX_QUEUED
// Enable this option to collect and display the number
// of dropped bytes after a file transfer to SD.
//#define SERIAL_STATS_DROPPED_RX
#endif
// Enable an emergency-command parser to intercept certain commands as they // Enable an emergency-command parser to intercept certain commands as they
// enter the serial receive buffer, so they cannot be blocked. // enter the serial receive buffer, so they cannot be blocked.
// Currently handles M108, M112, M410 // Currently handles M108, M112, M410

View File

@ -108,8 +108,9 @@
* *
* 250000 works in most cases, but you might try a lower speed if * 250000 works in most cases, but you might try a lower speed if
* you commonly experience drop-outs during host printing. * you commonly experience drop-outs during host printing.
* You may try up to 1000000 to speed up SD file transfer.
* *
* :[2400, 9600, 19200, 38400, 57600, 115200, 250000] * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
*/ */
#define BAUDRATE 250000 #define BAUDRATE 250000

View File

@ -751,7 +751,7 @@
#define MAX_CMD_SIZE 96 #define MAX_CMD_SIZE 96
#define BUFSIZE 4 #define BUFSIZE 4
// Transfer Buffer Size // Transmission to Host Buffer Size
// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. // To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0.
// To buffer a simple "ok" you need 4 bytes. // To buffer a simple "ok" you need 4 bytes.
// For ADVANCED_OK (M105) you need 32 bytes. // For ADVANCED_OK (M105) you need 32 bytes.
@ -760,6 +760,28 @@
// :[0, 2, 4, 8, 16, 32, 64, 128, 256] // :[0, 2, 4, 8, 16, 32, 64, 128, 256]
#define TX_BUFFER_SIZE 0 #define TX_BUFFER_SIZE 0
// Host Receive Buffer Size
// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough.
// To use flow control, set this buffer size to at least 1024 bytes.
// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048]
//#define RX_BUFFER_SIZE 1024
#if RX_BUFFER_SIZE >= 1024
// Enable to have the controller send XON/XOFF control characters to
// the host to signal the RX buffer is becoming full.
//#define SERIAL_XON_XOFF
#endif
#if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD.
//#define SERIAL_STATS_MAX_RX_QUEUED
// Enable this option to collect and display the number
// of dropped bytes after a file transfer to SD.
//#define SERIAL_STATS_DROPPED_RX
#endif
// Enable an emergency-command parser to intercept certain commands as they // Enable an emergency-command parser to intercept certain commands as they
// enter the serial receive buffer, so they cannot be blocked. // enter the serial receive buffer, so they cannot be blocked.
// Currently handles M108, M112, M410 // Currently handles M108, M112, M410

View File

@ -108,8 +108,9 @@
* *
* 250000 works in most cases, but you might try a lower speed if * 250000 works in most cases, but you might try a lower speed if
* you commonly experience drop-outs during host printing. * you commonly experience drop-outs during host printing.
* You may try up to 1000000 to speed up SD file transfer.
* *
* :[2400, 9600, 19200, 38400, 57600, 115200, 250000] * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
*/ */
#define BAUDRATE 250000 #define BAUDRATE 250000

View File

@ -108,8 +108,9 @@
* *
* 250000 works in most cases, but you might try a lower speed if * 250000 works in most cases, but you might try a lower speed if
* you commonly experience drop-outs during host printing. * you commonly experience drop-outs during host printing.
* You may try up to 1000000 to speed up SD file transfer.
* *
* :[2400, 9600, 19200, 38400, 57600, 115200, 250000] * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
*/ */
#define BAUDRATE 115200 #define BAUDRATE 115200

View File

@ -751,7 +751,7 @@
#define MAX_CMD_SIZE 96 #define MAX_CMD_SIZE 96
#define BUFSIZE 4 #define BUFSIZE 4
// Transfer Buffer Size // Transmission to Host Buffer Size
// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. // To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0.
// To buffer a simple "ok" you need 4 bytes. // To buffer a simple "ok" you need 4 bytes.
// For ADVANCED_OK (M105) you need 32 bytes. // For ADVANCED_OK (M105) you need 32 bytes.
@ -760,6 +760,28 @@
// :[0, 2, 4, 8, 16, 32, 64, 128, 256] // :[0, 2, 4, 8, 16, 32, 64, 128, 256]
#define TX_BUFFER_SIZE 0 #define TX_BUFFER_SIZE 0
// Host Receive Buffer Size
// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough.
// To use flow control, set this buffer size to at least 1024 bytes.
// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048]
//#define RX_BUFFER_SIZE 1024
#if RX_BUFFER_SIZE >= 1024
// Enable to have the controller send XON/XOFF control characters to
// the host to signal the RX buffer is becoming full.
//#define SERIAL_XON_XOFF
#endif
#if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD.
//#define SERIAL_STATS_MAX_RX_QUEUED
// Enable this option to collect and display the number
// of dropped bytes after a file transfer to SD.
//#define SERIAL_STATS_DROPPED_RX
#endif
// Enable an emergency-command parser to intercept certain commands as they // Enable an emergency-command parser to intercept certain commands as they
// enter the serial receive buffer, so they cannot be blocked. // enter the serial receive buffer, so they cannot be blocked.
// Currently handles M108, M112, M410 // Currently handles M108, M112, M410

View File

@ -108,8 +108,9 @@
* *
* 250000 works in most cases, but you might try a lower speed if * 250000 works in most cases, but you might try a lower speed if
* you commonly experience drop-outs during host printing. * you commonly experience drop-outs during host printing.
* You may try up to 1000000 to speed up SD file transfer.
* *
* :[2400, 9600, 19200, 38400, 57600, 115200, 250000] * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
*/ */
#define BAUDRATE 115200 #define BAUDRATE 115200

View File

@ -751,7 +751,7 @@
#define MAX_CMD_SIZE 96 #define MAX_CMD_SIZE 96
#define BUFSIZE 4 #define BUFSIZE 4
// Transfer Buffer Size // Transmission to Host Buffer Size
// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. // To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0.
// To buffer a simple "ok" you need 4 bytes. // To buffer a simple "ok" you need 4 bytes.
// For ADVANCED_OK (M105) you need 32 bytes. // For ADVANCED_OK (M105) you need 32 bytes.
@ -760,6 +760,28 @@
// :[0, 2, 4, 8, 16, 32, 64, 128, 256] // :[0, 2, 4, 8, 16, 32, 64, 128, 256]
#define TX_BUFFER_SIZE 0 #define TX_BUFFER_SIZE 0
// Host Receive Buffer Size
// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough.
// To use flow control, set this buffer size to at least 1024 bytes.
// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048]
//#define RX_BUFFER_SIZE 1024
#if RX_BUFFER_SIZE >= 1024
// Enable to have the controller send XON/XOFF control characters to
// the host to signal the RX buffer is becoming full.
//#define SERIAL_XON_XOFF
#endif
#if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD.
//#define SERIAL_STATS_MAX_RX_QUEUED
// Enable this option to collect and display the number
// of dropped bytes after a file transfer to SD.
//#define SERIAL_STATS_DROPPED_RX
#endif
// Enable an emergency-command parser to intercept certain commands as they // Enable an emergency-command parser to intercept certain commands as they
// enter the serial receive buffer, so they cannot be blocked. // enter the serial receive buffer, so they cannot be blocked.
// Currently handles M108, M112, M410 // Currently handles M108, M112, M410

View File

@ -108,8 +108,9 @@
* *
* 250000 works in most cases, but you might try a lower speed if * 250000 works in most cases, but you might try a lower speed if
* you commonly experience drop-outs during host printing. * you commonly experience drop-outs during host printing.
* You may try up to 1000000 to speed up SD file transfer.
* *
* :[2400, 9600, 19200, 38400, 57600, 115200, 250000] * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
*/ */
#define BAUDRATE 115200 #define BAUDRATE 115200

View File

@ -751,7 +751,7 @@
#define MAX_CMD_SIZE 96 #define MAX_CMD_SIZE 96
#define BUFSIZE 4 #define BUFSIZE 4
// Transfer Buffer Size // Transmission to Host Buffer Size
// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. // To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0.
// To buffer a simple "ok" you need 4 bytes. // To buffer a simple "ok" you need 4 bytes.
// For ADVANCED_OK (M105) you need 32 bytes. // For ADVANCED_OK (M105) you need 32 bytes.
@ -760,6 +760,28 @@
// :[0, 2, 4, 8, 16, 32, 64, 128, 256] // :[0, 2, 4, 8, 16, 32, 64, 128, 256]
#define TX_BUFFER_SIZE 0 #define TX_BUFFER_SIZE 0
// Host Receive Buffer Size
// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough.
// To use flow control, set this buffer size to at least 1024 bytes.
// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048]
//#define RX_BUFFER_SIZE 1024
#if RX_BUFFER_SIZE >= 1024
// Enable to have the controller send XON/XOFF control characters to
// the host to signal the RX buffer is becoming full.
//#define SERIAL_XON_XOFF
#endif
#if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD.
//#define SERIAL_STATS_MAX_RX_QUEUED
// Enable this option to collect and display the number
// of dropped bytes after a file transfer to SD.
//#define SERIAL_STATS_DROPPED_RX
#endif
// Enable an emergency-command parser to intercept certain commands as they // Enable an emergency-command parser to intercept certain commands as they
// enter the serial receive buffer, so they cannot be blocked. // enter the serial receive buffer, so they cannot be blocked.
// Currently handles M108, M112, M410 // Currently handles M108, M112, M410

View File

@ -107,8 +107,9 @@
* *
* 250000 works in most cases, but you might try a lower speed if * 250000 works in most cases, but you might try a lower speed if
* you commonly experience drop-outs during host printing. * you commonly experience drop-outs during host printing.
* You may try up to 1000000 to speed up SD file transfer.
* *
* :[2400, 9600, 19200, 38400, 57600, 115200, 250000] * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
*/ */
#define BAUDRATE 115200 #define BAUDRATE 115200

View File

@ -751,7 +751,7 @@
#define MAX_CMD_SIZE 96 #define MAX_CMD_SIZE 96
#define BUFSIZE 4 #define BUFSIZE 4
// Transfer Buffer Size // Transmission to Host Buffer Size
// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. // To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0.
// To buffer a simple "ok" you need 4 bytes. // To buffer a simple "ok" you need 4 bytes.
// For ADVANCED_OK (M105) you need 32 bytes. // For ADVANCED_OK (M105) you need 32 bytes.
@ -760,6 +760,28 @@
// :[0, 2, 4, 8, 16, 32, 64, 128, 256] // :[0, 2, 4, 8, 16, 32, 64, 128, 256]
#define TX_BUFFER_SIZE 32 #define TX_BUFFER_SIZE 32
// Host Receive Buffer Size
// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough.
// To use flow control, set this buffer size to at least 1024 bytes.
// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048]
//#define RX_BUFFER_SIZE 1024
#if RX_BUFFER_SIZE >= 1024
// Enable to have the controller send XON/XOFF control characters to
// the host to signal the RX buffer is becoming full.
//#define SERIAL_XON_XOFF
#endif
#if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD.
//#define SERIAL_STATS_MAX_RX_QUEUED
// Enable this option to collect and display the number
// of dropped bytes after a file transfer to SD.
//#define SERIAL_STATS_DROPPED_RX
#endif
// Enable an emergency-command parser to intercept certain commands as they // Enable an emergency-command parser to intercept certain commands as they
// enter the serial receive buffer, so they cannot be blocked. // enter the serial receive buffer, so they cannot be blocked.
// Currently handles M108, M112, M410 // Currently handles M108, M112, M410

View File

@ -108,8 +108,9 @@
* *
* 250000 works in most cases, but you might try a lower speed if * 250000 works in most cases, but you might try a lower speed if
* you commonly experience drop-outs during host printing. * you commonly experience drop-outs during host printing.
* You may try up to 1000000 to speed up SD file transfer.
* *
* :[2400, 9600, 19200, 38400, 57600, 115200, 250000] * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
*/ */
#define BAUDRATE 115200 #define BAUDRATE 115200

View File

@ -751,7 +751,7 @@
#define MAX_CMD_SIZE 96 #define MAX_CMD_SIZE 96
#define BUFSIZE 4 #define BUFSIZE 4
// Transfer Buffer Size // Transmission to Host Buffer Size
// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. // To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0.
// To buffer a simple "ok" you need 4 bytes. // To buffer a simple "ok" you need 4 bytes.
// For ADVANCED_OK (M105) you need 32 bytes. // For ADVANCED_OK (M105) you need 32 bytes.
@ -760,6 +760,28 @@
// :[0, 2, 4, 8, 16, 32, 64, 128, 256] // :[0, 2, 4, 8, 16, 32, 64, 128, 256]
#define TX_BUFFER_SIZE 0 #define TX_BUFFER_SIZE 0
// Host Receive Buffer Size
// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough.
// To use flow control, set this buffer size to at least 1024 bytes.
// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048]
//#define RX_BUFFER_SIZE 1024
#if RX_BUFFER_SIZE >= 1024
// Enable to have the controller send XON/XOFF control characters to
// the host to signal the RX buffer is becoming full.
//#define SERIAL_XON_XOFF
#endif
#if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD.
//#define SERIAL_STATS_MAX_RX_QUEUED
// Enable this option to collect and display the number
// of dropped bytes after a file transfer to SD.
//#define SERIAL_STATS_DROPPED_RX
#endif
// Enable an emergency-command parser to intercept certain commands as they // Enable an emergency-command parser to intercept certain commands as they
// enter the serial receive buffer, so they cannot be blocked. // enter the serial receive buffer, so they cannot be blocked.
// Currently handles M108, M112, M410 // Currently handles M108, M112, M410

View File

@ -108,8 +108,9 @@
* *
* 250000 works in most cases, but you might try a lower speed if * 250000 works in most cases, but you might try a lower speed if
* you commonly experience drop-outs during host printing. * you commonly experience drop-outs during host printing.
* You may try up to 1000000 to speed up SD file transfer.
* *
* :[2400, 9600, 19200, 38400, 57600, 115200, 250000] * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
*/ */
#define BAUDRATE 115200 #define BAUDRATE 115200

View File

@ -751,7 +751,7 @@
#define MAX_CMD_SIZE 96 #define MAX_CMD_SIZE 96
#define BUFSIZE 4 #define BUFSIZE 4
// Transfer Buffer Size // Transmission to Host Buffer Size
// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. // To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0.
// To buffer a simple "ok" you need 4 bytes. // To buffer a simple "ok" you need 4 bytes.
// For ADVANCED_OK (M105) you need 32 bytes. // For ADVANCED_OK (M105) you need 32 bytes.
@ -760,6 +760,28 @@
// :[0, 2, 4, 8, 16, 32, 64, 128, 256] // :[0, 2, 4, 8, 16, 32, 64, 128, 256]
#define TX_BUFFER_SIZE 0 #define TX_BUFFER_SIZE 0
// Host Receive Buffer Size
// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough.
// To use flow control, set this buffer size to at least 1024 bytes.
// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048]
//#define RX_BUFFER_SIZE 1024
#if RX_BUFFER_SIZE >= 1024
// Enable to have the controller send XON/XOFF control characters to
// the host to signal the RX buffer is becoming full.
//#define SERIAL_XON_XOFF
#endif
#if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD.
//#define SERIAL_STATS_MAX_RX_QUEUED
// Enable this option to collect and display the number
// of dropped bytes after a file transfer to SD.
//#define SERIAL_STATS_DROPPED_RX
#endif
// Enable an emergency-command parser to intercept certain commands as they // Enable an emergency-command parser to intercept certain commands as they
// enter the serial receive buffer, so they cannot be blocked. // enter the serial receive buffer, so they cannot be blocked.
// Currently handles M108, M112, M410 // Currently handles M108, M112, M410

View File

@ -108,8 +108,9 @@
* *
* 250000 works in most cases, but you might try a lower speed if * 250000 works in most cases, but you might try a lower speed if
* you commonly experience drop-outs during host printing. * you commonly experience drop-outs during host printing.
* You may try up to 1000000 to speed up SD file transfer.
* *
* :[2400, 9600, 19200, 38400, 57600, 115200, 250000] * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
*/ */
#define BAUDRATE 115200 #define BAUDRATE 115200

View File

@ -744,7 +744,7 @@
#define MAX_CMD_SIZE 96 #define MAX_CMD_SIZE 96
#define BUFSIZE 4 #define BUFSIZE 4
// Transfer Buffer Size // Transmission to Host Buffer Size
// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. // To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0.
// To buffer a simple "ok" you need 4 bytes. // To buffer a simple "ok" you need 4 bytes.
// For ADVANCED_OK (M105) you need 32 bytes. // For ADVANCED_OK (M105) you need 32 bytes.
@ -753,6 +753,28 @@
// :[0, 2, 4, 8, 16, 32, 64, 128, 256] // :[0, 2, 4, 8, 16, 32, 64, 128, 256]
#define TX_BUFFER_SIZE 0 #define TX_BUFFER_SIZE 0
// Host Receive Buffer Size
// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough.
// To use flow control, set this buffer size to at least 1024 bytes.
// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048]
//#define RX_BUFFER_SIZE 1024
#if RX_BUFFER_SIZE >= 1024
// Enable to have the controller send XON/XOFF control characters to
// the host to signal the RX buffer is becoming full.
//#define SERIAL_XON_XOFF
#endif
#if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD.
//#define SERIAL_STATS_MAX_RX_QUEUED
// Enable this option to collect and display the number
// of dropped bytes after a file transfer to SD.
//#define SERIAL_STATS_DROPPED_RX
#endif
// Enable an emergency-command parser to intercept certain commands as they // Enable an emergency-command parser to intercept certain commands as they
// enter the serial receive buffer, so they cannot be blocked. // enter the serial receive buffer, so they cannot be blocked.
// Currently handles M108, M112, M410 // Currently handles M108, M112, M410

View File

@ -108,8 +108,9 @@
* *
* 250000 works in most cases, but you might try a lower speed if * 250000 works in most cases, but you might try a lower speed if
* you commonly experience drop-outs during host printing. * you commonly experience drop-outs during host printing.
* You may try up to 1000000 to speed up SD file transfer.
* *
* :[2400, 9600, 19200, 38400, 57600, 115200, 250000] * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
*/ */
#define BAUDRATE 250000 #define BAUDRATE 250000

View File

@ -751,7 +751,7 @@
#define MAX_CMD_SIZE 96 #define MAX_CMD_SIZE 96
#define BUFSIZE 4 #define BUFSIZE 4
// Transfer Buffer Size // Transmission to Host Buffer Size
// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. // To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0.
// To buffer a simple "ok" you need 4 bytes. // To buffer a simple "ok" you need 4 bytes.
// For ADVANCED_OK (M105) you need 32 bytes. // For ADVANCED_OK (M105) you need 32 bytes.
@ -760,6 +760,28 @@
// :[0, 2, 4, 8, 16, 32, 64, 128, 256] // :[0, 2, 4, 8, 16, 32, 64, 128, 256]
#define TX_BUFFER_SIZE 0 #define TX_BUFFER_SIZE 0
// Host Receive Buffer Size
// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough.
// To use flow control, set this buffer size to at least 1024 bytes.
// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048]
//#define RX_BUFFER_SIZE 1024
#if RX_BUFFER_SIZE >= 1024
// Enable to have the controller send XON/XOFF control characters to
// the host to signal the RX buffer is becoming full.
//#define SERIAL_XON_XOFF
#endif
#if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD.
//#define SERIAL_STATS_MAX_RX_QUEUED
// Enable this option to collect and display the number
// of dropped bytes after a file transfer to SD.
//#define SERIAL_STATS_DROPPED_RX
#endif
// Enable an emergency-command parser to intercept certain commands as they // Enable an emergency-command parser to intercept certain commands as they
// enter the serial receive buffer, so they cannot be blocked. // enter the serial receive buffer, so they cannot be blocked.
// Currently handles M108, M112, M410 // Currently handles M108, M112, M410

View File

@ -108,8 +108,9 @@
* *
* 250000 works in most cases, but you might try a lower speed if * 250000 works in most cases, but you might try a lower speed if
* you commonly experience drop-outs during host printing. * you commonly experience drop-outs during host printing.
* You may try up to 1000000 to speed up SD file transfer.
* *
* :[2400, 9600, 19200, 38400, 57600, 115200, 250000] * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
*/ */
#define BAUDRATE 250000 #define BAUDRATE 250000

View File

@ -108,8 +108,9 @@
* *
* 250000 works in most cases, but you might try a lower speed if * 250000 works in most cases, but you might try a lower speed if
* you commonly experience drop-outs during host printing. * you commonly experience drop-outs during host printing.
* You may try up to 1000000 to speed up SD file transfer.
* *
* :[2400, 9600, 19200, 38400, 57600, 115200, 250000] * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
*/ */
#define BAUDRATE 250000 #define BAUDRATE 250000

View File

@ -751,7 +751,7 @@
#define MAX_CMD_SIZE 96 #define MAX_CMD_SIZE 96
#define BUFSIZE 4 #define BUFSIZE 4
// Transfer Buffer Size // Transmission to Host Buffer Size
// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. // To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0.
// To buffer a simple "ok" you need 4 bytes. // To buffer a simple "ok" you need 4 bytes.
// For ADVANCED_OK (M105) you need 32 bytes. // For ADVANCED_OK (M105) you need 32 bytes.
@ -760,6 +760,28 @@
// :[0, 2, 4, 8, 16, 32, 64, 128, 256] // :[0, 2, 4, 8, 16, 32, 64, 128, 256]
#define TX_BUFFER_SIZE 0 #define TX_BUFFER_SIZE 0
// Host Receive Buffer Size
// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough.
// To use flow control, set this buffer size to at least 1024 bytes.
// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048]
//#define RX_BUFFER_SIZE 1024
#if RX_BUFFER_SIZE >= 1024
// Enable to have the controller send XON/XOFF control characters to
// the host to signal the RX buffer is becoming full.
//#define SERIAL_XON_XOFF
#endif
#if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD.
//#define SERIAL_STATS_MAX_RX_QUEUED
// Enable this option to collect and display the number
// of dropped bytes after a file transfer to SD.
//#define SERIAL_STATS_DROPPED_RX
#endif
// Enable an emergency-command parser to intercept certain commands as they // Enable an emergency-command parser to intercept certain commands as they
// enter the serial receive buffer, so they cannot be blocked. // enter the serial receive buffer, so they cannot be blocked.
// Currently handles M108, M112, M410 // Currently handles M108, M112, M410

View File

@ -108,8 +108,9 @@
* *
* 250000 works in most cases, but you might try a lower speed if * 250000 works in most cases, but you might try a lower speed if
* you commonly experience drop-outs during host printing. * you commonly experience drop-outs during host printing.
* You may try up to 1000000 to speed up SD file transfer.
* *
* :[2400, 9600, 19200, 38400, 57600, 115200, 250000] * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
*/ */
#define BAUDRATE 250000 #define BAUDRATE 250000

View File

@ -108,8 +108,9 @@
* *
* 250000 works in most cases, but you might try a lower speed if * 250000 works in most cases, but you might try a lower speed if
* you commonly experience drop-outs during host printing. * you commonly experience drop-outs during host printing.
* You may try up to 1000000 to speed up SD file transfer.
* *
* :[2400, 9600, 19200, 38400, 57600, 115200, 250000] * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
*/ */
#define BAUDRATE 250000 #define BAUDRATE 250000

View File

@ -108,8 +108,9 @@
* *
* 250000 works in most cases, but you might try a lower speed if * 250000 works in most cases, but you might try a lower speed if
* you commonly experience drop-outs during host printing. * you commonly experience drop-outs during host printing.
* You may try up to 1000000 to speed up SD file transfer.
* *
* :[2400, 9600, 19200, 38400, 57600, 115200, 250000] * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
*/ */
#define BAUDRATE 250000 #define BAUDRATE 250000

View File

@ -751,7 +751,7 @@
#define MAX_CMD_SIZE 96 #define MAX_CMD_SIZE 96
#define BUFSIZE 4 #define BUFSIZE 4
// Transfer Buffer Size // Transmission to Host Buffer Size
// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. // To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0.
// To buffer a simple "ok" you need 4 bytes. // To buffer a simple "ok" you need 4 bytes.
// For ADVANCED_OK (M105) you need 32 bytes. // For ADVANCED_OK (M105) you need 32 bytes.
@ -760,6 +760,28 @@
// :[0, 2, 4, 8, 16, 32, 64, 128, 256] // :[0, 2, 4, 8, 16, 32, 64, 128, 256]
#define TX_BUFFER_SIZE 0 #define TX_BUFFER_SIZE 0
// Host Receive Buffer Size
// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough.
// To use flow control, set this buffer size to at least 1024 bytes.
// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048]
//#define RX_BUFFER_SIZE 1024
#if RX_BUFFER_SIZE >= 1024
// Enable to have the controller send XON/XOFF control characters to
// the host to signal the RX buffer is becoming full.
//#define SERIAL_XON_XOFF
#endif
#if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD.
//#define SERIAL_STATS_MAX_RX_QUEUED
// Enable this option to collect and display the number
// of dropped bytes after a file transfer to SD.
//#define SERIAL_STATS_DROPPED_RX
#endif
// Enable an emergency-command parser to intercept certain commands as they // Enable an emergency-command parser to intercept certain commands as they
// enter the serial receive buffer, so they cannot be blocked. // enter the serial receive buffer, so they cannot be blocked.
// Currently handles M108, M112, M410 // Currently handles M108, M112, M410

View File

@ -113,8 +113,9 @@
* *
* 250000 works in most cases, but you might try a lower speed if * 250000 works in most cases, but you might try a lower speed if
* you commonly experience drop-outs during host printing. * you commonly experience drop-outs during host printing.
* You may try up to 1000000 to speed up SD file transfer.
* *
* :[2400, 9600, 19200, 38400, 57600, 115200, 250000] * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
*/ */
#define BAUDRATE 115200 #define BAUDRATE 115200

View File

@ -751,7 +751,7 @@
#define MAX_CMD_SIZE 96 #define MAX_CMD_SIZE 96
#define BUFSIZE 4 #define BUFSIZE 4
// Transfer Buffer Size // Transmission to Host Buffer Size
// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. // To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0.
// To buffer a simple "ok" you need 4 bytes. // To buffer a simple "ok" you need 4 bytes.
// For ADVANCED_OK (M105) you need 32 bytes. // For ADVANCED_OK (M105) you need 32 bytes.
@ -760,6 +760,28 @@
// :[0, 2, 4, 8, 16, 32, 64, 128, 256] // :[0, 2, 4, 8, 16, 32, 64, 128, 256]
#define TX_BUFFER_SIZE 0 #define TX_BUFFER_SIZE 0
// Host Receive Buffer Size
// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough.
// To use flow control, set this buffer size to at least 1024 bytes.
// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048]
//#define RX_BUFFER_SIZE 1024
#if RX_BUFFER_SIZE >= 1024
// Enable to have the controller send XON/XOFF control characters to
// the host to signal the RX buffer is becoming full.
//#define SERIAL_XON_XOFF
#endif
#if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD.
//#define SERIAL_STATS_MAX_RX_QUEUED
// Enable this option to collect and display the number
// of dropped bytes after a file transfer to SD.
//#define SERIAL_STATS_DROPPED_RX
#endif
// Enable an emergency-command parser to intercept certain commands as they // Enable an emergency-command parser to intercept certain commands as they
// enter the serial receive buffer, so they cannot be blocked. // enter the serial receive buffer, so they cannot be blocked.
// Currently handles M108, M112, M410 // Currently handles M108, M112, M410

View File

@ -108,8 +108,9 @@
* *
* 250000 works in most cases, but you might try a lower speed if * 250000 works in most cases, but you might try a lower speed if
* you commonly experience drop-outs during host printing. * you commonly experience drop-outs during host printing.
* You may try up to 1000000 to speed up SD file transfer.
* *
* :[2400, 9600, 19200, 38400, 57600, 115200, 250000] * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
*/ */
#define BAUDRATE 250000 #define BAUDRATE 250000

View File

@ -108,8 +108,9 @@
* *
* 250000 works in most cases, but you might try a lower speed if * 250000 works in most cases, but you might try a lower speed if
* you commonly experience drop-outs during host printing. * you commonly experience drop-outs during host printing.
* You may try up to 1000000 to speed up SD file transfer.
* *
* :[2400, 9600, 19200, 38400, 57600, 115200, 250000] * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
*/ */
#define BAUDRATE 115200 #define BAUDRATE 115200

View File

@ -751,7 +751,7 @@
#define MAX_CMD_SIZE 96 #define MAX_CMD_SIZE 96
#define BUFSIZE 8 #define BUFSIZE 8
// Transfer Buffer Size // Transmission to Host Buffer Size
// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. // To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0.
// To buffer a simple "ok" you need 4 bytes. // To buffer a simple "ok" you need 4 bytes.
// For ADVANCED_OK (M105) you need 32 bytes. // For ADVANCED_OK (M105) you need 32 bytes.
@ -760,6 +760,28 @@
// :[0, 2, 4, 8, 16, 32, 64, 128, 256] // :[0, 2, 4, 8, 16, 32, 64, 128, 256]
#define TX_BUFFER_SIZE 0 #define TX_BUFFER_SIZE 0
// Host Receive Buffer Size
// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough.
// To use flow control, set this buffer size to at least 1024 bytes.
// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048]
//#define RX_BUFFER_SIZE 1024
#if RX_BUFFER_SIZE >= 1024
// Enable to have the controller send XON/XOFF control characters to
// the host to signal the RX buffer is becoming full.
//#define SERIAL_XON_XOFF
#endif
#if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD.
//#define SERIAL_STATS_MAX_RX_QUEUED
// Enable this option to collect and display the number
// of dropped bytes after a file transfer to SD.
//#define SERIAL_STATS_DROPPED_RX
#endif
// Enable an emergency-command parser to intercept certain commands as they // Enable an emergency-command parser to intercept certain commands as they
// enter the serial receive buffer, so they cannot be blocked. // enter the serial receive buffer, so they cannot be blocked.
// Currently handles M108, M112, M410 // Currently handles M108, M112, M410

View File

@ -138,8 +138,9 @@
* *
* 250000 works in most cases, but you might try a lower speed if * 250000 works in most cases, but you might try a lower speed if
* you commonly experience drop-outs during host printing. * you commonly experience drop-outs during host printing.
* You may try up to 1000000 to speed up SD file transfer.
* *
* :[2400, 9600, 19200, 38400, 57600, 115200, 250000] * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
*/ */
#define BAUDRATE 250000 #define BAUDRATE 250000

View File

@ -751,7 +751,7 @@
#define MAX_CMD_SIZE 96 #define MAX_CMD_SIZE 96
#define BUFSIZE 4 #define BUFSIZE 4
// Transfer Buffer Size // Transmission to Host Buffer Size
// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. // To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0.
// To buffer a simple "ok" you need 4 bytes. // To buffer a simple "ok" you need 4 bytes.
// For ADVANCED_OK (M105) you need 32 bytes. // For ADVANCED_OK (M105) you need 32 bytes.
@ -760,6 +760,28 @@
// :[0, 2, 4, 8, 16, 32, 64, 128, 256] // :[0, 2, 4, 8, 16, 32, 64, 128, 256]
#define TX_BUFFER_SIZE 0 #define TX_BUFFER_SIZE 0
// Host Receive Buffer Size
// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough.
// To use flow control, set this buffer size to at least 1024 bytes.
// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048]
//#define RX_BUFFER_SIZE 1024
#if RX_BUFFER_SIZE >= 1024
// Enable to have the controller send XON/XOFF control characters to
// the host to signal the RX buffer is becoming full.
//#define SERIAL_XON_XOFF
#endif
#if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD.
//#define SERIAL_STATS_MAX_RX_QUEUED
// Enable this option to collect and display the number
// of dropped bytes after a file transfer to SD.
//#define SERIAL_STATS_DROPPED_RX
#endif
// Enable an emergency-command parser to intercept certain commands as they // Enable an emergency-command parser to intercept certain commands as they
// enter the serial receive buffer, so they cannot be blocked. // enter the serial receive buffer, so they cannot be blocked.
// Currently handles M108, M112, M410 // Currently handles M108, M112, M410

View File

@ -108,8 +108,9 @@
* *
* 250000 works in most cases, but you might try a lower speed if * 250000 works in most cases, but you might try a lower speed if
* you commonly experience drop-outs during host printing. * you commonly experience drop-outs during host printing.
* You may try up to 1000000 to speed up SD file transfer.
* *
* :[2400, 9600, 19200, 38400, 57600, 115200, 250000] * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
*/ */
#define BAUDRATE 115200 #define BAUDRATE 115200

View File

@ -740,7 +740,7 @@
#define MAX_CMD_SIZE 96 #define MAX_CMD_SIZE 96
#define BUFSIZE 4 #define BUFSIZE 4
// Transfer Buffer Size // Transmission to Host Buffer Size
// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. // To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0.
// To buffer a simple "ok" you need 4 bytes. // To buffer a simple "ok" you need 4 bytes.
// For ADVANCED_OK (M105) you need 32 bytes. // For ADVANCED_OK (M105) you need 32 bytes.
@ -749,6 +749,28 @@
// :[0, 2, 4, 8, 16, 32, 64, 128, 256] // :[0, 2, 4, 8, 16, 32, 64, 128, 256]
#define TX_BUFFER_SIZE 0 #define TX_BUFFER_SIZE 0
// Host Receive Buffer Size
// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough.
// To use flow control, set this buffer size to at least 1024 bytes.
// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048]
//#define RX_BUFFER_SIZE 1024
#if RX_BUFFER_SIZE >= 1024
// Enable to have the controller send XON/XOFF control characters to
// the host to signal the RX buffer is becoming full.
//#define SERIAL_XON_XOFF
#endif
#if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD.
//#define SERIAL_STATS_MAX_RX_QUEUED
// Enable this option to collect and display the number
// of dropped bytes after a file transfer to SD.
//#define SERIAL_STATS_DROPPED_RX
#endif
// Enable an emergency-command parser to intercept certain commands as they // Enable an emergency-command parser to intercept certain commands as they
// enter the serial receive buffer, so they cannot be blocked. // enter the serial receive buffer, so they cannot be blocked.
// Currently handles M108, M112, M410 // Currently handles M108, M112, M410

View File

@ -124,8 +124,9 @@
* *
* 250000 works in most cases, but you might try a lower speed if * 250000 works in most cases, but you might try a lower speed if
* you commonly experience drop-outs during host printing. * you commonly experience drop-outs during host printing.
* You may try up to 1000000 to speed up SD file transfer.
* *
* :[2400, 9600, 19200, 38400, 57600, 115200, 250000] * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
*/ */
#define BAUDRATE 115200 #define BAUDRATE 115200

View File

@ -751,7 +751,7 @@
#define MAX_CMD_SIZE 96 #define MAX_CMD_SIZE 96
#define BUFSIZE 4 #define BUFSIZE 4
// Transfer Buffer Size // Transmission to Host Buffer Size
// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. // To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0.
// To buffer a simple "ok" you need 4 bytes. // To buffer a simple "ok" you need 4 bytes.
// For ADVANCED_OK (M105) you need 32 bytes. // For ADVANCED_OK (M105) you need 32 bytes.
@ -760,6 +760,28 @@
// :[0, 2, 4, 8, 16, 32, 64, 128, 256] // :[0, 2, 4, 8, 16, 32, 64, 128, 256]
#define TX_BUFFER_SIZE 64 #define TX_BUFFER_SIZE 64
// Host Receive Buffer Size
// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough.
// To use flow control, set this buffer size to at least 1024 bytes.
// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048]
//#define RX_BUFFER_SIZE 1024
#if RX_BUFFER_SIZE >= 1024
// Enable to have the controller send XON/XOFF control characters to
// the host to signal the RX buffer is becoming full.
//#define SERIAL_XON_XOFF
#endif
#if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD.
//#define SERIAL_STATS_MAX_RX_QUEUED
// Enable this option to collect and display the number
// of dropped bytes after a file transfer to SD.
//#define SERIAL_STATS_DROPPED_RX
#endif
// Enable an emergency-command parser to intercept certain commands as they // Enable an emergency-command parser to intercept certain commands as they
// enter the serial receive buffer, so they cannot be blocked. // enter the serial receive buffer, so they cannot be blocked.
// Currently handles M108, M112, M410 // Currently handles M108, M112, M410

View File

@ -124,8 +124,9 @@
* *
* 250000 works in most cases, but you might try a lower speed if * 250000 works in most cases, but you might try a lower speed if
* you commonly experience drop-outs during host printing. * you commonly experience drop-outs during host printing.
* You may try up to 1000000 to speed up SD file transfer.
* *
* :[2400, 9600, 19200, 38400, 57600, 115200, 250000] * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
*/ */
#define BAUDRATE 250000 #define BAUDRATE 250000

View File

@ -764,7 +764,7 @@
#define MAX_CMD_SIZE 96 #define MAX_CMD_SIZE 96
#define BUFSIZE 4 #define BUFSIZE 4
// Transfer Buffer Size // Transmission to Host Buffer Size
// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. // To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0.
// To buffer a simple "ok" you need 4 bytes. // To buffer a simple "ok" you need 4 bytes.
// For ADVANCED_OK (M105) you need 32 bytes. // For ADVANCED_OK (M105) you need 32 bytes.
@ -773,6 +773,28 @@
// :[0, 2, 4, 8, 16, 32, 64, 128, 256] // :[0, 2, 4, 8, 16, 32, 64, 128, 256]
#define TX_BUFFER_SIZE 128 #define TX_BUFFER_SIZE 128
// Host Receive Buffer Size
// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough.
// To use flow control, set this buffer size to at least 1024 bytes.
// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048]
//#define RX_BUFFER_SIZE 1024
#if RX_BUFFER_SIZE >= 1024
// Enable to have the controller send XON/XOFF control characters to
// the host to signal the RX buffer is becoming full.
//#define SERIAL_XON_XOFF
#endif
#if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD.
//#define SERIAL_STATS_MAX_RX_QUEUED
// Enable this option to collect and display the number
// of dropped bytes after a file transfer to SD.
//#define SERIAL_STATS_DROPPED_RX
#endif
// Enable an emergency-command parser to intercept certain commands as they // Enable an emergency-command parser to intercept certain commands as they
// enter the serial receive buffer, so they cannot be blocked. // enter the serial receive buffer, so they cannot be blocked.
// Currently handles M108, M112, M410 // Currently handles M108, M112, M410

View File

@ -108,8 +108,9 @@
* *
* 250000 works in most cases, but you might try a lower speed if * 250000 works in most cases, but you might try a lower speed if
* you commonly experience drop-outs during host printing. * you commonly experience drop-outs during host printing.
* You may try up to 1000000 to speed up SD file transfer.
* *
* :[2400, 9600, 19200, 38400, 57600, 115200, 250000] * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
*/ */
#define BAUDRATE 250000 #define BAUDRATE 250000

View File

@ -751,7 +751,7 @@
#define MAX_CMD_SIZE 96 #define MAX_CMD_SIZE 96
#define BUFSIZE 26 #define BUFSIZE 26
// Transfer Buffer Size // Transmission to Host Buffer Size
// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. // To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0.
// To buffer a simple "ok" you need 4 bytes. // To buffer a simple "ok" you need 4 bytes.
// For ADVANCED_OK (M105) you need 32 bytes. // For ADVANCED_OK (M105) you need 32 bytes.
@ -760,6 +760,28 @@
// :[0, 2, 4, 8, 16, 32, 64, 128, 256] // :[0, 2, 4, 8, 16, 32, 64, 128, 256]
#define TX_BUFFER_SIZE 0 #define TX_BUFFER_SIZE 0
// Host Receive Buffer Size
// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough.
// To use flow control, set this buffer size to at least 1024 bytes.
// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048]
//#define RX_BUFFER_SIZE 1024
#if RX_BUFFER_SIZE >= 1024
// Enable to have the controller send XON/XOFF control characters to
// the host to signal the RX buffer is becoming full.
//#define SERIAL_XON_XOFF
#endif
#if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD.
//#define SERIAL_STATS_MAX_RX_QUEUED
// Enable this option to collect and display the number
// of dropped bytes after a file transfer to SD.
//#define SERIAL_STATS_DROPPED_RX
#endif
// Enable an emergency-command parser to intercept certain commands as they // Enable an emergency-command parser to intercept certain commands as they
// enter the serial receive buffer, so they cannot be blocked. // enter the serial receive buffer, so they cannot be blocked.
// Currently handles M108, M112, M410 // Currently handles M108, M112, M410

View File

@ -108,8 +108,9 @@
* *
* 250000 works in most cases, but you might try a lower speed if * 250000 works in most cases, but you might try a lower speed if
* you commonly experience drop-outs during host printing. * you commonly experience drop-outs during host printing.
* You may try up to 1000000 to speed up SD file transfer.
* *
* :[2400, 9600, 19200, 38400, 57600, 115200, 250000] * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
*/ */
#define BAUDRATE 250000 #define BAUDRATE 250000

View File

@ -108,8 +108,9 @@
* *
* 250000 works in most cases, but you might try a lower speed if * 250000 works in most cases, but you might try a lower speed if
* you commonly experience drop-outs during host printing. * you commonly experience drop-outs during host printing.
* You may try up to 1000000 to speed up SD file transfer.
* *
* :[2400, 9600, 19200, 38400, 57600, 115200, 250000] * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
*/ */
#define BAUDRATE 250000 #define BAUDRATE 250000

View File

@ -108,8 +108,9 @@
* *
* 250000 works in most cases, but you might try a lower speed if * 250000 works in most cases, but you might try a lower speed if
* you commonly experience drop-outs during host printing. * you commonly experience drop-outs during host printing.
* You may try up to 1000000 to speed up SD file transfer.
* *
* :[2400, 9600, 19200, 38400, 57600, 115200, 250000] * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
*/ */
#define BAUDRATE 250000 #define BAUDRATE 250000

View File

@ -753,7 +753,7 @@
#define MAX_CMD_SIZE 96 #define MAX_CMD_SIZE 96
#define BUFSIZE 4 #define BUFSIZE 4
// Transfer Buffer Size // Transmission to Host Buffer Size
// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. // To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0.
// To buffer a simple "ok" you need 4 bytes. // To buffer a simple "ok" you need 4 bytes.
// For ADVANCED_OK (M105) you need 32 bytes. // For ADVANCED_OK (M105) you need 32 bytes.
@ -762,6 +762,28 @@
// :[0, 2, 4, 8, 16, 32, 64, 128, 256] // :[0, 2, 4, 8, 16, 32, 64, 128, 256]
#define TX_BUFFER_SIZE 0 #define TX_BUFFER_SIZE 0
// Host Receive Buffer Size
// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough.
// To use flow control, set this buffer size to at least 1024 bytes.
// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048]
//#define RX_BUFFER_SIZE 1024
#if RX_BUFFER_SIZE >= 1024
// Enable to have the controller send XON/XOFF control characters to
// the host to signal the RX buffer is becoming full.
//#define SERIAL_XON_XOFF
#endif
#if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD.
//#define SERIAL_STATS_MAX_RX_QUEUED
// Enable this option to collect and display the number
// of dropped bytes after a file transfer to SD.
//#define SERIAL_STATS_DROPPED_RX
#endif
// Enable an emergency-command parser to intercept certain commands as they // Enable an emergency-command parser to intercept certain commands as they
// enter the serial receive buffer, so they cannot be blocked. // enter the serial receive buffer, so they cannot be blocked.
// Currently handles M108, M112, M410 // Currently handles M108, M112, M410

View File

@ -108,8 +108,9 @@
* *
* 250000 works in most cases, but you might try a lower speed if * 250000 works in most cases, but you might try a lower speed if
* you commonly experience drop-outs during host printing. * you commonly experience drop-outs during host printing.
* You may try up to 1000000 to speed up SD file transfer.
* *
* :[2400, 9600, 19200, 38400, 57600, 115200, 250000] * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
*/ */
#define BAUDRATE 250000 #define BAUDRATE 250000

View File

@ -753,7 +753,7 @@
#define MAX_CMD_SIZE 96 #define MAX_CMD_SIZE 96
#define BUFSIZE 4 #define BUFSIZE 4
// Transfer Buffer Size // Transmission to Host Buffer Size
// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. // To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0.
// To buffer a simple "ok" you need 4 bytes. // To buffer a simple "ok" you need 4 bytes.
// For ADVANCED_OK (M105) you need 32 bytes. // For ADVANCED_OK (M105) you need 32 bytes.
@ -762,6 +762,28 @@
// :[0, 2, 4, 8, 16, 32, 64, 128, 256] // :[0, 2, 4, 8, 16, 32, 64, 128, 256]
#define TX_BUFFER_SIZE 0 #define TX_BUFFER_SIZE 0
// Host Receive Buffer Size
// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough.
// To use flow control, set this buffer size to at least 1024 bytes.
// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048]
//#define RX_BUFFER_SIZE 1024
#if RX_BUFFER_SIZE >= 1024
// Enable to have the controller send XON/XOFF control characters to
// the host to signal the RX buffer is becoming full.
//#define SERIAL_XON_XOFF
#endif
#if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD.
//#define SERIAL_STATS_MAX_RX_QUEUED
// Enable this option to collect and display the number
// of dropped bytes after a file transfer to SD.
//#define SERIAL_STATS_DROPPED_RX
#endif
// Enable an emergency-command parser to intercept certain commands as they // Enable an emergency-command parser to intercept certain commands as they
// enter the serial receive buffer, so they cannot be blocked. // enter the serial receive buffer, so they cannot be blocked.
// Currently handles M108, M112, M410 // Currently handles M108, M112, M410

View File

@ -108,8 +108,9 @@
* *
* 250000 works in most cases, but you might try a lower speed if * 250000 works in most cases, but you might try a lower speed if
* you commonly experience drop-outs during host printing. * you commonly experience drop-outs during host printing.
* You may try up to 1000000 to speed up SD file transfer.
* *
* :[2400, 9600, 19200, 38400, 57600, 115200, 250000] * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
*/ */
#define BAUDRATE 250000 #define BAUDRATE 250000

View File

@ -753,7 +753,7 @@
#define MAX_CMD_SIZE 96 #define MAX_CMD_SIZE 96
#define BUFSIZE 4 #define BUFSIZE 4
// Transfer Buffer Size // Transmission to Host Buffer Size
// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. // To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0.
// To buffer a simple "ok" you need 4 bytes. // To buffer a simple "ok" you need 4 bytes.
// For ADVANCED_OK (M105) you need 32 bytes. // For ADVANCED_OK (M105) you need 32 bytes.
@ -762,6 +762,28 @@
// :[0, 2, 4, 8, 16, 32, 64, 128, 256] // :[0, 2, 4, 8, 16, 32, 64, 128, 256]
#define TX_BUFFER_SIZE 0 #define TX_BUFFER_SIZE 0
// Host Receive Buffer Size
// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough.
// To use flow control, set this buffer size to at least 1024 bytes.
// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048]
//#define RX_BUFFER_SIZE 1024
#if RX_BUFFER_SIZE >= 1024
// Enable to have the controller send XON/XOFF control characters to
// the host to signal the RX buffer is becoming full.
//#define SERIAL_XON_XOFF
#endif
#if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD.
//#define SERIAL_STATS_MAX_RX_QUEUED
// Enable this option to collect and display the number
// of dropped bytes after a file transfer to SD.
//#define SERIAL_STATS_DROPPED_RX
#endif
// Enable an emergency-command parser to intercept certain commands as they // Enable an emergency-command parser to intercept certain commands as they
// enter the serial receive buffer, so they cannot be blocked. // enter the serial receive buffer, so they cannot be blocked.
// Currently handles M108, M112, M410 // Currently handles M108, M112, M410

View File

@ -108,8 +108,9 @@
* *
* 250000 works in most cases, but you might try a lower speed if * 250000 works in most cases, but you might try a lower speed if
* you commonly experience drop-outs during host printing. * you commonly experience drop-outs during host printing.
* You may try up to 1000000 to speed up SD file transfer.
* *
* :[2400, 9600, 19200, 38400, 57600, 115200, 250000] * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
*/ */
#define BAUDRATE 250000 #define BAUDRATE 250000

View File

@ -753,7 +753,7 @@
#define MAX_CMD_SIZE 96 #define MAX_CMD_SIZE 96
#define BUFSIZE 4 #define BUFSIZE 4
// Transfer Buffer Size // Transmission to Host Buffer Size
// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. // To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0.
// To buffer a simple "ok" you need 4 bytes. // To buffer a simple "ok" you need 4 bytes.
// For ADVANCED_OK (M105) you need 32 bytes. // For ADVANCED_OK (M105) you need 32 bytes.
@ -762,6 +762,28 @@
// :[0, 2, 4, 8, 16, 32, 64, 128, 256] // :[0, 2, 4, 8, 16, 32, 64, 128, 256]
#define TX_BUFFER_SIZE 0 #define TX_BUFFER_SIZE 0
// Host Receive Buffer Size
// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough.
// To use flow control, set this buffer size to at least 1024 bytes.
// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048]
//#define RX_BUFFER_SIZE 1024
#if RX_BUFFER_SIZE >= 1024
// Enable to have the controller send XON/XOFF control characters to
// the host to signal the RX buffer is becoming full.
//#define SERIAL_XON_XOFF
#endif
#if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD.
//#define SERIAL_STATS_MAX_RX_QUEUED
// Enable this option to collect and display the number
// of dropped bytes after a file transfer to SD.
//#define SERIAL_STATS_DROPPED_RX
#endif
// Enable an emergency-command parser to intercept certain commands as they // Enable an emergency-command parser to intercept certain commands as they
// enter the serial receive buffer, so they cannot be blocked. // enter the serial receive buffer, so they cannot be blocked.
// Currently handles M108, M112, M410 // Currently handles M108, M112, M410

View File

@ -112,8 +112,9 @@
* *
* 250000 works in most cases, but you might try a lower speed if * 250000 works in most cases, but you might try a lower speed if
* you commonly experience drop-outs during host printing. * you commonly experience drop-outs during host printing.
* You may try up to 1000000 to speed up SD file transfer.
* *
* :[2400, 9600, 19200, 38400, 57600, 115200, 250000] * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
*/ */
#define BAUDRATE 115200 #define BAUDRATE 115200

View File

@ -758,7 +758,7 @@
#define MAX_CMD_SIZE 96 #define MAX_CMD_SIZE 96
#define BUFSIZE 4 #define BUFSIZE 4
// Transfer Buffer Size // Transmission to Host Buffer Size
// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. // To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0.
// To buffer a simple "ok" you need 4 bytes. // To buffer a simple "ok" you need 4 bytes.
// For ADVANCED_OK (M105) you need 32 bytes. // For ADVANCED_OK (M105) you need 32 bytes.
@ -767,6 +767,28 @@
// :[0, 2, 4, 8, 16, 32, 64, 128, 256] // :[0, 2, 4, 8, 16, 32, 64, 128, 256]
#define TX_BUFFER_SIZE 0 #define TX_BUFFER_SIZE 0
// Host Receive Buffer Size
// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough.
// To use flow control, set this buffer size to at least 1024 bytes.
// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048]
//#define RX_BUFFER_SIZE 1024
#if RX_BUFFER_SIZE >= 1024
// Enable to have the controller send XON/XOFF control characters to
// the host to signal the RX buffer is becoming full.
//#define SERIAL_XON_XOFF
#endif
#if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD.
//#define SERIAL_STATS_MAX_RX_QUEUED
// Enable this option to collect and display the number
// of dropped bytes after a file transfer to SD.
//#define SERIAL_STATS_DROPPED_RX
#endif
// Enable an emergency-command parser to intercept certain commands as they // Enable an emergency-command parser to intercept certain commands as they
// enter the serial receive buffer, so they cannot be blocked. // enter the serial receive buffer, so they cannot be blocked.
// Currently handles M108, M112, M410 // Currently handles M108, M112, M410

View File

@ -108,8 +108,9 @@
* *
* 250000 works in most cases, but you might try a lower speed if * 250000 works in most cases, but you might try a lower speed if
* you commonly experience drop-outs during host printing. * you commonly experience drop-outs during host printing.
* You may try up to 1000000 to speed up SD file transfer.
* *
* :[2400, 9600, 19200, 38400, 57600, 115200, 250000] * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
*/ */
#define BAUDRATE 250000 #define BAUDRATE 250000

View File

@ -753,7 +753,7 @@
#define MAX_CMD_SIZE 96 #define MAX_CMD_SIZE 96
#define BUFSIZE 4 #define BUFSIZE 4
// Transfer Buffer Size // Transmission to Host Buffer Size
// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. // To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0.
// To buffer a simple "ok" you need 4 bytes. // To buffer a simple "ok" you need 4 bytes.
// For ADVANCED_OK (M105) you need 32 bytes. // For ADVANCED_OK (M105) you need 32 bytes.
@ -762,6 +762,28 @@
// :[0, 2, 4, 8, 16, 32, 64, 128, 256] // :[0, 2, 4, 8, 16, 32, 64, 128, 256]
#define TX_BUFFER_SIZE 0 #define TX_BUFFER_SIZE 0
// Host Receive Buffer Size
// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough.
// To use flow control, set this buffer size to at least 1024 bytes.
// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048]
//#define RX_BUFFER_SIZE 1024
#if RX_BUFFER_SIZE >= 1024
// Enable to have the controller send XON/XOFF control characters to
// the host to signal the RX buffer is becoming full.
//#define SERIAL_XON_XOFF
#endif
#if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD.
//#define SERIAL_STATS_MAX_RX_QUEUED
// Enable this option to collect and display the number
// of dropped bytes after a file transfer to SD.
//#define SERIAL_STATS_DROPPED_RX
#endif
// Enable an emergency-command parser to intercept certain commands as they // Enable an emergency-command parser to intercept certain commands as they
// enter the serial receive buffer, so they cannot be blocked. // enter the serial receive buffer, so they cannot be blocked.
// Currently handles M108, M112, M410 // Currently handles M108, M112, M410

View File

@ -108,8 +108,9 @@
* *
* 250000 works in most cases, but you might try a lower speed if * 250000 works in most cases, but you might try a lower speed if
* you commonly experience drop-outs during host printing. * you commonly experience drop-outs during host printing.
* You may try up to 1000000 to speed up SD file transfer.
* *
* :[2400, 9600, 19200, 38400, 57600, 115200, 250000] * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
*/ */
#define BAUDRATE 250000 #define BAUDRATE 250000

View File

@ -751,7 +751,7 @@
#define MAX_CMD_SIZE 96 #define MAX_CMD_SIZE 96
#define BUFSIZE 4 #define BUFSIZE 4
// Transfer Buffer Size // Transmission to Host Buffer Size
// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. // To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0.
// To buffer a simple "ok" you need 4 bytes. // To buffer a simple "ok" you need 4 bytes.
// For ADVANCED_OK (M105) you need 32 bytes. // For ADVANCED_OK (M105) you need 32 bytes.
@ -760,6 +760,28 @@
// :[0, 2, 4, 8, 16, 32, 64, 128, 256] // :[0, 2, 4, 8, 16, 32, 64, 128, 256]
#define TX_BUFFER_SIZE 32 #define TX_BUFFER_SIZE 32
// Host Receive Buffer Size
// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough.
// To use flow control, set this buffer size to at least 1024 bytes.
// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048]
//#define RX_BUFFER_SIZE 1024
#if RX_BUFFER_SIZE >= 1024
// Enable to have the controller send XON/XOFF control characters to
// the host to signal the RX buffer is becoming full.
//#define SERIAL_XON_XOFF
#endif
#if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD.
//#define SERIAL_STATS_MAX_RX_QUEUED
// Enable this option to collect and display the number
// of dropped bytes after a file transfer to SD.
//#define SERIAL_STATS_DROPPED_RX
#endif
// Enable an emergency-command parser to intercept certain commands as they // Enable an emergency-command parser to intercept certain commands as they
// enter the serial receive buffer, so they cannot be blocked. // enter the serial receive buffer, so they cannot be blocked.
// Currently handles M108, M112, M410 // Currently handles M108, M112, M410

View File

@ -108,8 +108,9 @@
* *
* 250000 works in most cases, but you might try a lower speed if * 250000 works in most cases, but you might try a lower speed if
* you commonly experience drop-outs during host printing. * you commonly experience drop-outs during host printing.
* You may try up to 1000000 to speed up SD file transfer.
* *
* :[2400, 9600, 19200, 38400, 57600, 115200, 250000] * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
*/ */
#define BAUDRATE 250000 #define BAUDRATE 250000

View File

@ -751,7 +751,7 @@
#define MAX_CMD_SIZE 96 #define MAX_CMD_SIZE 96
#define BUFSIZE 4 #define BUFSIZE 4
// Transfer Buffer Size // Transmission to Host Buffer Size
// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. // To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0.
// To buffer a simple "ok" you need 4 bytes. // To buffer a simple "ok" you need 4 bytes.
// For ADVANCED_OK (M105) you need 32 bytes. // For ADVANCED_OK (M105) you need 32 bytes.
@ -760,6 +760,28 @@
// :[0, 2, 4, 8, 16, 32, 64, 128, 256] // :[0, 2, 4, 8, 16, 32, 64, 128, 256]
#define TX_BUFFER_SIZE 0 #define TX_BUFFER_SIZE 0
// Host Receive Buffer Size
// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough.
// To use flow control, set this buffer size to at least 1024 bytes.
// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048]
//#define RX_BUFFER_SIZE 1024
#if RX_BUFFER_SIZE >= 1024
// Enable to have the controller send XON/XOFF control characters to
// the host to signal the RX buffer is becoming full.
//#define SERIAL_XON_XOFF
#endif
#if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD.
//#define SERIAL_STATS_MAX_RX_QUEUED
// Enable this option to collect and display the number
// of dropped bytes after a file transfer to SD.
//#define SERIAL_STATS_DROPPED_RX
#endif
// Enable an emergency-command parser to intercept certain commands as they // Enable an emergency-command parser to intercept certain commands as they
// enter the serial receive buffer, so they cannot be blocked. // enter the serial receive buffer, so they cannot be blocked.
// Currently handles M108, M112, M410 // Currently handles M108, M112, M410

View File

@ -107,8 +107,9 @@
* *
* 250000 works in most cases, but you might try a lower speed if * 250000 works in most cases, but you might try a lower speed if
* you commonly experience drop-outs during host printing. * you commonly experience drop-outs during host printing.
* You may try up to 1000000 to speed up SD file transfer.
* *
* :[2400, 9600, 19200, 38400, 57600, 115200, 250000] * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
*/ */
#define BAUDRATE 250000 #define BAUDRATE 250000

View File

@ -108,8 +108,9 @@
* *
* 250000 works in most cases, but you might try a lower speed if * 250000 works in most cases, but you might try a lower speed if
* you commonly experience drop-outs during host printing. * you commonly experience drop-outs during host printing.
* You may try up to 1000000 to speed up SD file transfer.
* *
* :[2400, 9600, 19200, 38400, 57600, 115200, 250000] * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
*/ */
#define BAUDRATE 250000 #define BAUDRATE 250000

View File

@ -751,7 +751,7 @@
#define MAX_CMD_SIZE 96 #define MAX_CMD_SIZE 96
#define BUFSIZE 4 #define BUFSIZE 4
// Transfer Buffer Size // Transmission to Host Buffer Size
// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. // To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0.
// To buffer a simple "ok" you need 4 bytes. // To buffer a simple "ok" you need 4 bytes.
// For ADVANCED_OK (M105) you need 32 bytes. // For ADVANCED_OK (M105) you need 32 bytes.
@ -760,6 +760,28 @@
// :[0, 2, 4, 8, 16, 32, 64, 128, 256] // :[0, 2, 4, 8, 16, 32, 64, 128, 256]
#define TX_BUFFER_SIZE 0 #define TX_BUFFER_SIZE 0
// Host Receive Buffer Size
// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough.
// To use flow control, set this buffer size to at least 1024 bytes.
// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048]
//#define RX_BUFFER_SIZE 1024
#if RX_BUFFER_SIZE >= 1024
// Enable to have the controller send XON/XOFF control characters to
// the host to signal the RX buffer is becoming full.
//#define SERIAL_XON_XOFF
#endif
#if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD.
//#define SERIAL_STATS_MAX_RX_QUEUED
// Enable this option to collect and display the number
// of dropped bytes after a file transfer to SD.
//#define SERIAL_STATS_DROPPED_RX
#endif
// Enable an emergency-command parser to intercept certain commands as they // Enable an emergency-command parser to intercept certain commands as they
// enter the serial receive buffer, so they cannot be blocked. // enter the serial receive buffer, so they cannot be blocked.
// Currently handles M108, M112, M410 // Currently handles M108, M112, M410

View File

@ -108,8 +108,9 @@
* *
* 250000 works in most cases, but you might try a lower speed if * 250000 works in most cases, but you might try a lower speed if
* you commonly experience drop-outs during host printing. * you commonly experience drop-outs during host printing.
* You may try up to 1000000 to speed up SD file transfer.
* *
* :[2400, 9600, 19200, 38400, 57600, 115200, 250000] * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
*/ */
#define BAUDRATE 115200 #define BAUDRATE 115200

View File

@ -751,7 +751,7 @@
#define MAX_CMD_SIZE 96 #define MAX_CMD_SIZE 96
#define BUFSIZE 4 #define BUFSIZE 4
// Transfer Buffer Size // Transmission to Host Buffer Size
// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. // To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0.
// To buffer a simple "ok" you need 4 bytes. // To buffer a simple "ok" you need 4 bytes.
// For ADVANCED_OK (M105) you need 32 bytes. // For ADVANCED_OK (M105) you need 32 bytes.
@ -760,6 +760,28 @@
// :[0, 2, 4, 8, 16, 32, 64, 128, 256] // :[0, 2, 4, 8, 16, 32, 64, 128, 256]
#define TX_BUFFER_SIZE 0 #define TX_BUFFER_SIZE 0
// Host Receive Buffer Size
// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough.
// To use flow control, set this buffer size to at least 1024 bytes.
// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048]
//#define RX_BUFFER_SIZE 1024
#if RX_BUFFER_SIZE >= 1024
// Enable to have the controller send XON/XOFF control characters to
// the host to signal the RX buffer is becoming full.
//#define SERIAL_XON_XOFF
#endif
#if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD.
//#define SERIAL_STATS_MAX_RX_QUEUED
// Enable this option to collect and display the number
// of dropped bytes after a file transfer to SD.
//#define SERIAL_STATS_DROPPED_RX
#endif
// Enable an emergency-command parser to intercept certain commands as they // Enable an emergency-command parser to intercept certain commands as they
// enter the serial receive buffer, so they cannot be blocked. // enter the serial receive buffer, so they cannot be blocked.
// Currently handles M108, M112, M410 // Currently handles M108, M112, M410