From b2eda1af2fe95f36749c22958557273bbfcc2626 Mon Sep 17 00:00:00 2001 From: InsanityAutomation <38436470+InsanityAutomation@users.noreply.github.com> Date: Tue, 15 Oct 2019 18:22:13 -0400 Subject: [PATCH] Fix typo in G34 configuration (#15572) --- Marlin/Configuration_adv.h | 3 ++- config/default/Configuration_adv.h | 3 ++- config/examples/3DFabXYZ/Migbot/Configuration_adv.h | 3 ++- config/examples/ADIMLab/Gantry v1/Configuration_adv.h | 3 ++- config/examples/ADIMLab/Gantry v2/Configuration_adv.h | 3 ++- config/examples/AlephObjects/TAZ4/Configuration_adv.h | 3 ++- config/examples/Alfawise/U20-bltouch/Configuration_adv.h | 3 ++- config/examples/Alfawise/U20/Configuration_adv.h | 3 ++- config/examples/AliExpress/UM2pExt/Configuration_adv.h | 3 ++- config/examples/Anet/A2/Configuration_adv.h | 3 ++- config/examples/Anet/A2plus/Configuration_adv.h | 3 ++- config/examples/Anet/A6/Configuration_adv.h | 3 ++- config/examples/Anet/A8/Configuration_adv.h | 3 ++- config/examples/Anet/A8plus/Configuration_adv.h | 3 ++- config/examples/Anet/E16/Configuration_adv.h | 3 ++- config/examples/AnyCubic/i3/Configuration_adv.h | 3 ++- config/examples/ArmEd/Configuration_adv.h | 3 ++- config/examples/BIBO/TouchX/cyclops/Configuration_adv.h | 3 ++- config/examples/BIBO/TouchX/default/Configuration_adv.h | 3 ++- config/examples/BQ/Hephestos/Configuration_adv.h | 3 ++- config/examples/BQ/Hephestos_2/Configuration_adv.h | 3 ++- config/examples/BQ/WITBOX/Configuration_adv.h | 3 ++- config/examples/Cartesio/Configuration_adv.h | 3 ++- config/examples/Creality/CR-10/Configuration_adv.h | 3 ++- config/examples/Creality/CR-10S/Configuration_adv.h | 3 ++- config/examples/Creality/CR-10_5S/Configuration_adv.h | 3 ++- config/examples/Creality/CR-10mini/Configuration_adv.h | 3 ++- config/examples/Creality/CR-20 Pro/Configuration_adv.h | 3 ++- config/examples/Creality/CR-20/Configuration_adv.h | 3 ++- config/examples/Creality/CR-8/Configuration_adv.h | 3 ++- config/examples/Creality/Ender-2/Configuration_adv.h | 3 ++- config/examples/Creality/Ender-3/Configuration_adv.h | 3 ++- config/examples/Creality/Ender-4/Configuration_adv.h | 3 ++- config/examples/Creality/Ender-5/Configuration_adv.h | 3 ++- config/examples/Dagoma/Disco Ultimate/Configuration_adv.h | 3 ++- .../EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h | 3 ++- config/examples/Einstart-S/Configuration_adv.h | 3 ++- config/examples/FYSETC/AIO_II/Configuration_adv.h | 3 ++- config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h | 3 ++- config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h | 3 ++- config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h | 3 ++- config/examples/FYSETC/Cheetah/base/Configuration_adv.h | 3 ++- config/examples/FYSETC/F6_13/Configuration_adv.h | 3 ++- config/examples/Felix/DUAL/Configuration_adv.h | 3 ++- config/examples/Felix/Single/Configuration_adv.h | 3 ++- config/examples/FlashForge/CreatorPro/Configuration_adv.h | 3 ++- config/examples/FolgerTech/i3-2020/Configuration_adv.h | 3 ++- config/examples/Formbot/Raptor/Configuration_adv.h | 3 ++- config/examples/Formbot/T_Rex_2+/Configuration_adv.h | 3 ++- config/examples/Formbot/T_Rex_3/Configuration_adv.h | 3 ++- config/examples/Geeetech/A10/Configuration_adv.h | 3 ++- config/examples/Geeetech/A10M/Configuration_adv.h | 3 ++- config/examples/Geeetech/A20M/Configuration_adv.h | 3 ++- config/examples/Geeetech/MeCreator2/Configuration_adv.h | 3 ++- config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h | 3 ++- config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h | 3 ++- config/examples/HMS434/Configuration_adv.h | 3 ++- config/examples/Infitary/i3-M508/Configuration_adv.h | 3 ++- config/examples/JGAurora/A1/Configuration_adv.h | 3 ++- config/examples/JGAurora/A5/Configuration_adv.h | 3 ++- config/examples/JGAurora/A5S/Configuration_adv.h | 3 ++- config/examples/MakerParts/Configuration_adv.h | 3 ++- config/examples/Malyan/M150/Configuration_adv.h | 3 ++- config/examples/Malyan/M200/Configuration_adv.h | 3 ++- config/examples/Micromake/C1/enhanced/Configuration_adv.h | 3 ++- config/examples/Mks/Robin/Configuration_adv.h | 3 ++- config/examples/Mks/Sbase/Configuration_adv.h | 3 ++- config/examples/RapideLite/RL200/Configuration_adv.h | 3 ++- config/examples/RigidBot/Configuration_adv.h | 3 ++- config/examples/SCARA/Configuration_adv.h | 3 ++- config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h | 3 ++- config/examples/Sanguinololu/Configuration_adv.h | 3 ++- config/examples/Tevo/Michelangelo/Configuration_adv.h | 3 ++- config/examples/Tevo/Tarantula Pro/Configuration_adv.h | 3 ++- config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h | 3 ++- .../examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h | 3 ++- config/examples/TheBorg/Configuration_adv.h | 3 ++- config/examples/TinyBoy2/Configuration_adv.h | 3 ++- config/examples/Tronxy/X3A/Configuration_adv.h | 3 ++- config/examples/Tronxy/X5S-2E/Configuration_adv.h | 3 ++- config/examples/UltiMachine/Archim1/Configuration_adv.h | 3 ++- config/examples/UltiMachine/Archim2/Configuration_adv.h | 3 ++- config/examples/VORONDesign/Configuration_adv.h | 3 ++- config/examples/Velleman/K8200/Configuration_adv.h | 3 ++- config/examples/Velleman/K8400/Dual-head/Configuration_adv.h | 3 ++- config/examples/Velleman/K8400/Single-head/Configuration_adv.h | 3 ++- config/examples/WASP/PowerWASP/Configuration_adv.h | 3 ++- config/examples/Wanhao/Duplicator 6/Configuration_adv.h | 3 ++- config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h | 3 ++- config/examples/delta/Anycubic/Kossel/Configuration_adv.h | 3 ++- config/examples/delta/Dreammaker/Overlord/Configuration_adv.h | 3 ++- .../examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h | 3 ++- config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h | 3 ++- config/examples/delta/FLSUN/kossel/Configuration_adv.h | 3 ++- config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h | 3 ++- config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h | 3 ++- config/examples/delta/MKS/SBASE/Configuration_adv.h | 3 ++- config/examples/delta/Tevo Little Monster/Configuration_adv.h | 3 ++- config/examples/delta/generic/Configuration_adv.h | 3 ++- config/examples/delta/kossel_mini/Configuration_adv.h | 3 ++- config/examples/delta/kossel_xl/Configuration_adv.h | 3 ++- config/examples/gCreate/gMax1.5+/Configuration_adv.h | 3 ++- config/examples/makibox/Configuration_adv.h | 3 ++- config/examples/tvrrug/Round2/Configuration_adv.h | 3 ++- config/examples/wt150/Configuration_adv.h | 3 ++- 105 files changed, 210 insertions(+), 105 deletions(-) diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index 7b7ae9c22f..be8cc57816 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/default/Configuration_adv.h b/config/default/Configuration_adv.h index 7b7ae9c22f..be8cc57816 100644 --- a/config/default/Configuration_adv.h +++ b/config/default/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h index 5a9c71ac8c..9c6f19e5ea 100644 --- a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h +++ b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h index 9a6f05c684..76eaee3bbf 100644 --- a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h +++ b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h index 9e4e70cd96..c7c46e926f 100644 --- a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h +++ b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/AlephObjects/TAZ4/Configuration_adv.h b/config/examples/AlephObjects/TAZ4/Configuration_adv.h index 61e05b21e4..48649c6c80 100644 --- a/config/examples/AlephObjects/TAZ4/Configuration_adv.h +++ b/config/examples/AlephObjects/TAZ4/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h index 447ba13dc7..30b495a7d3 100644 --- a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h +++ b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h @@ -604,7 +604,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/Alfawise/U20/Configuration_adv.h b/config/examples/Alfawise/U20/Configuration_adv.h index a7cee97926..fdf956ca38 100644 --- a/config/examples/Alfawise/U20/Configuration_adv.h +++ b/config/examples/Alfawise/U20/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/AliExpress/UM2pExt/Configuration_adv.h b/config/examples/AliExpress/UM2pExt/Configuration_adv.h index 94c526d31f..cb042e01f0 100644 --- a/config/examples/AliExpress/UM2pExt/Configuration_adv.h +++ b/config/examples/AliExpress/UM2pExt/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/Anet/A2/Configuration_adv.h b/config/examples/Anet/A2/Configuration_adv.h index 232e08cb9e..cb564592e9 100644 --- a/config/examples/Anet/A2/Configuration_adv.h +++ b/config/examples/Anet/A2/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/Anet/A2plus/Configuration_adv.h b/config/examples/Anet/A2plus/Configuration_adv.h index 232e08cb9e..cb564592e9 100644 --- a/config/examples/Anet/A2plus/Configuration_adv.h +++ b/config/examples/Anet/A2plus/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/Anet/A6/Configuration_adv.h b/config/examples/Anet/A6/Configuration_adv.h index 66b70ceaf1..32c24672e7 100644 --- a/config/examples/Anet/A6/Configuration_adv.h +++ b/config/examples/Anet/A6/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/Anet/A8/Configuration_adv.h b/config/examples/Anet/A8/Configuration_adv.h index fc27ad5b2c..e18a43a9a8 100644 --- a/config/examples/Anet/A8/Configuration_adv.h +++ b/config/examples/Anet/A8/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/Anet/A8plus/Configuration_adv.h b/config/examples/Anet/A8plus/Configuration_adv.h index 15446b9f12..313226f589 100644 --- a/config/examples/Anet/A8plus/Configuration_adv.h +++ b/config/examples/Anet/A8plus/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/Anet/E16/Configuration_adv.h b/config/examples/Anet/E16/Configuration_adv.h index c2ef67ef2e..e9360c9083 100644 --- a/config/examples/Anet/E16/Configuration_adv.h +++ b/config/examples/Anet/E16/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/AnyCubic/i3/Configuration_adv.h b/config/examples/AnyCubic/i3/Configuration_adv.h index 73f0e07532..166e563412 100644 --- a/config/examples/AnyCubic/i3/Configuration_adv.h +++ b/config/examples/AnyCubic/i3/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/ArmEd/Configuration_adv.h b/config/examples/ArmEd/Configuration_adv.h index 4f3b445776..752c3e14c8 100644 --- a/config/examples/ArmEd/Configuration_adv.h +++ b/config/examples/ArmEd/Configuration_adv.h @@ -607,7 +607,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h index 9b55b3619c..f6bea9d21a 100644 --- a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/BIBO/TouchX/default/Configuration_adv.h b/config/examples/BIBO/TouchX/default/Configuration_adv.h index 3c44f5b995..0fea3b9d4d 100644 --- a/config/examples/BIBO/TouchX/default/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/default/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/BQ/Hephestos/Configuration_adv.h b/config/examples/BQ/Hephestos/Configuration_adv.h index bcb760a35b..378f838fe7 100644 --- a/config/examples/BQ/Hephestos/Configuration_adv.h +++ b/config/examples/BQ/Hephestos/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/BQ/Hephestos_2/Configuration_adv.h b/config/examples/BQ/Hephestos_2/Configuration_adv.h index 21a34cccac..846fa6d6ef 100644 --- a/config/examples/BQ/Hephestos_2/Configuration_adv.h +++ b/config/examples/BQ/Hephestos_2/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/BQ/WITBOX/Configuration_adv.h b/config/examples/BQ/WITBOX/Configuration_adv.h index bcb760a35b..378f838fe7 100644 --- a/config/examples/BQ/WITBOX/Configuration_adv.h +++ b/config/examples/BQ/WITBOX/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/Cartesio/Configuration_adv.h b/config/examples/Cartesio/Configuration_adv.h index 753437178e..a2ead624f1 100644 --- a/config/examples/Cartesio/Configuration_adv.h +++ b/config/examples/Cartesio/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/Creality/CR-10/Configuration_adv.h b/config/examples/Creality/CR-10/Configuration_adv.h index 1c6c08a9ed..c8d88708a5 100644 --- a/config/examples/Creality/CR-10/Configuration_adv.h +++ b/config/examples/Creality/CR-10/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/Creality/CR-10S/Configuration_adv.h b/config/examples/Creality/CR-10S/Configuration_adv.h index be8827e53f..a8c44a3096 100644 --- a/config/examples/Creality/CR-10S/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/Creality/CR-10_5S/Configuration_adv.h b/config/examples/Creality/CR-10_5S/Configuration_adv.h index 9b40472e19..4db8c109ef 100644 --- a/config/examples/Creality/CR-10_5S/Configuration_adv.h +++ b/config/examples/Creality/CR-10_5S/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/Creality/CR-10mini/Configuration_adv.h b/config/examples/Creality/CR-10mini/Configuration_adv.h index 3cd65d1783..890da094d6 100644 --- a/config/examples/Creality/CR-10mini/Configuration_adv.h +++ b/config/examples/Creality/CR-10mini/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/Creality/CR-20 Pro/Configuration_adv.h b/config/examples/Creality/CR-20 Pro/Configuration_adv.h index 6ae2aec34f..d5b9e7496d 100644 --- a/config/examples/Creality/CR-20 Pro/Configuration_adv.h +++ b/config/examples/Creality/CR-20 Pro/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/Creality/CR-20/Configuration_adv.h b/config/examples/Creality/CR-20/Configuration_adv.h index 8809936ad5..fd8bc17b40 100644 --- a/config/examples/Creality/CR-20/Configuration_adv.h +++ b/config/examples/Creality/CR-20/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/Creality/CR-8/Configuration_adv.h b/config/examples/Creality/CR-8/Configuration_adv.h index 87bb77716b..781f660665 100644 --- a/config/examples/Creality/CR-8/Configuration_adv.h +++ b/config/examples/Creality/CR-8/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/Creality/Ender-2/Configuration_adv.h b/config/examples/Creality/Ender-2/Configuration_adv.h index 1798faa2a7..91155e7fc9 100644 --- a/config/examples/Creality/Ender-2/Configuration_adv.h +++ b/config/examples/Creality/Ender-2/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/Creality/Ender-3/Configuration_adv.h b/config/examples/Creality/Ender-3/Configuration_adv.h index 1fa44d2f2a..204d2c2526 100644 --- a/config/examples/Creality/Ender-3/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/Creality/Ender-4/Configuration_adv.h b/config/examples/Creality/Ender-4/Configuration_adv.h index 0320a4d160..002864dfdd 100644 --- a/config/examples/Creality/Ender-4/Configuration_adv.h +++ b/config/examples/Creality/Ender-4/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/Creality/Ender-5/Configuration_adv.h b/config/examples/Creality/Ender-5/Configuration_adv.h index 28baf18af3..378b9dbe6d 100644 --- a/config/examples/Creality/Ender-5/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h index 3bdfe1c0b8..56ed4b2a8e 100644 --- a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h +++ b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h b/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h index 7058bd18c1..ecc8950f6f 100755 --- a/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h +++ b/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/Einstart-S/Configuration_adv.h b/config/examples/Einstart-S/Configuration_adv.h index 0adad60544..ecc2629008 100644 --- a/config/examples/Einstart-S/Configuration_adv.h +++ b/config/examples/Einstart-S/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/FYSETC/AIO_II/Configuration_adv.h b/config/examples/FYSETC/AIO_II/Configuration_adv.h index a39a7d85b8..d52e7eabfe 100644 --- a/config/examples/FYSETC/AIO_II/Configuration_adv.h +++ b/config/examples/FYSETC/AIO_II/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h b/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h index ea0e44ee96..cfdc435786 100644 --- a/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h +++ b/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h b/config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h index ea0e44ee96..cfdc435786 100644 --- a/config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h +++ b/config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h b/config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h index ea0e44ee96..cfdc435786 100644 --- a/config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h +++ b/config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/FYSETC/Cheetah/base/Configuration_adv.h b/config/examples/FYSETC/Cheetah/base/Configuration_adv.h index ea0e44ee96..cfdc435786 100644 --- a/config/examples/FYSETC/Cheetah/base/Configuration_adv.h +++ b/config/examples/FYSETC/Cheetah/base/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/FYSETC/F6_13/Configuration_adv.h b/config/examples/FYSETC/F6_13/Configuration_adv.h index 3ca6096f10..7dafbc86f7 100644 --- a/config/examples/FYSETC/F6_13/Configuration_adv.h +++ b/config/examples/FYSETC/F6_13/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/Felix/DUAL/Configuration_adv.h b/config/examples/Felix/DUAL/Configuration_adv.h index 974a6761a6..9691273bfc 100644 --- a/config/examples/Felix/DUAL/Configuration_adv.h +++ b/config/examples/Felix/DUAL/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/Felix/Single/Configuration_adv.h b/config/examples/Felix/Single/Configuration_adv.h index 974a6761a6..9691273bfc 100644 --- a/config/examples/Felix/Single/Configuration_adv.h +++ b/config/examples/Felix/Single/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/FlashForge/CreatorPro/Configuration_adv.h b/config/examples/FlashForge/CreatorPro/Configuration_adv.h index 46d5adcb84..3a986a2138 100644 --- a/config/examples/FlashForge/CreatorPro/Configuration_adv.h +++ b/config/examples/FlashForge/CreatorPro/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/config/examples/FolgerTech/i3-2020/Configuration_adv.h index 112d318630..3a2d817581 100644 --- a/config/examples/FolgerTech/i3-2020/Configuration_adv.h +++ b/config/examples/FolgerTech/i3-2020/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/Formbot/Raptor/Configuration_adv.h b/config/examples/Formbot/Raptor/Configuration_adv.h index a013ff1a2a..b37f3d0de5 100644 --- a/config/examples/Formbot/Raptor/Configuration_adv.h +++ b/config/examples/Formbot/Raptor/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h index aeab9e65dd..c32609510d 100644 --- a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h +++ b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h @@ -607,7 +607,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/Formbot/T_Rex_3/Configuration_adv.h b/config/examples/Formbot/T_Rex_3/Configuration_adv.h index 20cb973980..e51fee2c35 100644 --- a/config/examples/Formbot/T_Rex_3/Configuration_adv.h +++ b/config/examples/Formbot/T_Rex_3/Configuration_adv.h @@ -607,7 +607,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/Geeetech/A10/Configuration_adv.h b/config/examples/Geeetech/A10/Configuration_adv.h index f56e3712f7..a502b63cdf 100644 --- a/config/examples/Geeetech/A10/Configuration_adv.h +++ b/config/examples/Geeetech/A10/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/Geeetech/A10M/Configuration_adv.h b/config/examples/Geeetech/A10M/Configuration_adv.h index 5b84f08a41..b2f2ea41b2 100644 --- a/config/examples/Geeetech/A10M/Configuration_adv.h +++ b/config/examples/Geeetech/A10M/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/Geeetech/A20M/Configuration_adv.h b/config/examples/Geeetech/A20M/Configuration_adv.h index 6095e41e5d..285ed5d9ab 100644 --- a/config/examples/Geeetech/A20M/Configuration_adv.h +++ b/config/examples/Geeetech/A20M/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/Geeetech/MeCreator2/Configuration_adv.h b/config/examples/Geeetech/MeCreator2/Configuration_adv.h index d5aab438de..95ae32e816 100644 --- a/config/examples/Geeetech/MeCreator2/Configuration_adv.h +++ b/config/examples/Geeetech/MeCreator2/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h index f56e3712f7..a502b63cdf 100644 --- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h index f56e3712f7..a502b63cdf 100644 --- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/HMS434/Configuration_adv.h b/config/examples/HMS434/Configuration_adv.h index 3999949229..0ab6fe34fa 100644 --- a/config/examples/HMS434/Configuration_adv.h +++ b/config/examples/HMS434/Configuration_adv.h @@ -595,7 +595,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/Infitary/i3-M508/Configuration_adv.h b/config/examples/Infitary/i3-M508/Configuration_adv.h index d623890468..e0371b73fd 100644 --- a/config/examples/Infitary/i3-M508/Configuration_adv.h +++ b/config/examples/Infitary/i3-M508/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/JGAurora/A1/Configuration_adv.h b/config/examples/JGAurora/A1/Configuration_adv.h index 2d5f788c92..8904cc60c2 100644 --- a/config/examples/JGAurora/A1/Configuration_adv.h +++ b/config/examples/JGAurora/A1/Configuration_adv.h @@ -608,7 +608,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/JGAurora/A5/Configuration_adv.h b/config/examples/JGAurora/A5/Configuration_adv.h index 571c850327..5a999ae818 100644 --- a/config/examples/JGAurora/A5/Configuration_adv.h +++ b/config/examples/JGAurora/A5/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/JGAurora/A5S/Configuration_adv.h b/config/examples/JGAurora/A5S/Configuration_adv.h index 2d5f788c92..8904cc60c2 100644 --- a/config/examples/JGAurora/A5S/Configuration_adv.h +++ b/config/examples/JGAurora/A5S/Configuration_adv.h @@ -608,7 +608,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/MakerParts/Configuration_adv.h b/config/examples/MakerParts/Configuration_adv.h index 7bdc6a7d6b..01d0dcd1eb 100644 --- a/config/examples/MakerParts/Configuration_adv.h +++ b/config/examples/MakerParts/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/Malyan/M150/Configuration_adv.h b/config/examples/Malyan/M150/Configuration_adv.h index a2ce3d0387..0b63942a74 100644 --- a/config/examples/Malyan/M150/Configuration_adv.h +++ b/config/examples/Malyan/M150/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/Malyan/M200/Configuration_adv.h b/config/examples/Malyan/M200/Configuration_adv.h index 601d14e8ef..d74cef3867 100644 --- a/config/examples/Malyan/M200/Configuration_adv.h +++ b/config/examples/Malyan/M200/Configuration_adv.h @@ -605,7 +605,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/config/examples/Micromake/C1/enhanced/Configuration_adv.h index 54ce80b3b1..afc78f5afd 100644 --- a/config/examples/Micromake/C1/enhanced/Configuration_adv.h +++ b/config/examples/Micromake/C1/enhanced/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/Mks/Robin/Configuration_adv.h b/config/examples/Mks/Robin/Configuration_adv.h index 7fc132f5dd..7ec4434958 100644 --- a/config/examples/Mks/Robin/Configuration_adv.h +++ b/config/examples/Mks/Robin/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/Mks/Sbase/Configuration_adv.h b/config/examples/Mks/Sbase/Configuration_adv.h index 54f06443f2..2b9459adfe 100644 --- a/config/examples/Mks/Sbase/Configuration_adv.h +++ b/config/examples/Mks/Sbase/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/RapideLite/RL200/Configuration_adv.h b/config/examples/RapideLite/RL200/Configuration_adv.h index 12f028c9fa..e9c7c90c06 100644 --- a/config/examples/RapideLite/RL200/Configuration_adv.h +++ b/config/examples/RapideLite/RL200/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/RigidBot/Configuration_adv.h b/config/examples/RigidBot/Configuration_adv.h index 5d649e82d1..a7bc7a0f35 100644 --- a/config/examples/RigidBot/Configuration_adv.h +++ b/config/examples/RigidBot/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/SCARA/Configuration_adv.h b/config/examples/SCARA/Configuration_adv.h index 00d770125a..06a442a1c5 100644 --- a/config/examples/SCARA/Configuration_adv.h +++ b/config/examples/SCARA/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h index d0dbb2560e..73e0cdebd1 100644 --- a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h +++ b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/Sanguinololu/Configuration_adv.h b/config/examples/Sanguinololu/Configuration_adv.h index 655c1e4f96..76dffa229d 100644 --- a/config/examples/Sanguinololu/Configuration_adv.h +++ b/config/examples/Sanguinololu/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/Tevo/Michelangelo/Configuration_adv.h b/config/examples/Tevo/Michelangelo/Configuration_adv.h index ec6c373563..9c543274ce 100644 --- a/config/examples/Tevo/Michelangelo/Configuration_adv.h +++ b/config/examples/Tevo/Michelangelo/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h index 32dbefea69..6f1c5359bc 100755 --- a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h +++ b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h index 8c17e681f4..ff8f516b72 100755 --- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h index 8c17e681f4..ff8f516b72 100755 --- a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/TheBorg/Configuration_adv.h b/config/examples/TheBorg/Configuration_adv.h index 46747203c9..6507e02c47 100644 --- a/config/examples/TheBorg/Configuration_adv.h +++ b/config/examples/TheBorg/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/TinyBoy2/Configuration_adv.h b/config/examples/TinyBoy2/Configuration_adv.h index fc48440c78..30f8b946a3 100644 --- a/config/examples/TinyBoy2/Configuration_adv.h +++ b/config/examples/TinyBoy2/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/Tronxy/X3A/Configuration_adv.h b/config/examples/Tronxy/X3A/Configuration_adv.h index 59695991fa..fccd1ce20d 100644 --- a/config/examples/Tronxy/X3A/Configuration_adv.h +++ b/config/examples/Tronxy/X3A/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/Tronxy/X5S-2E/Configuration_adv.h b/config/examples/Tronxy/X5S-2E/Configuration_adv.h index 98ee2f1abf..5bb73f5010 100644 --- a/config/examples/Tronxy/X5S-2E/Configuration_adv.h +++ b/config/examples/Tronxy/X5S-2E/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/UltiMachine/Archim1/Configuration_adv.h b/config/examples/UltiMachine/Archim1/Configuration_adv.h index 4c7dde4870..008894701c 100644 --- a/config/examples/UltiMachine/Archim1/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim1/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/UltiMachine/Archim2/Configuration_adv.h b/config/examples/UltiMachine/Archim2/Configuration_adv.h index 23c7800c1d..7ea2ed4c9e 100644 --- a/config/examples/UltiMachine/Archim2/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim2/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/VORONDesign/Configuration_adv.h b/config/examples/VORONDesign/Configuration_adv.h index 763acebdf2..a43aa837bb 100644 --- a/config/examples/VORONDesign/Configuration_adv.h +++ b/config/examples/VORONDesign/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/Velleman/K8200/Configuration_adv.h b/config/examples/Velleman/K8200/Configuration_adv.h index 63713d4492..5470bfa0ba 100644 --- a/config/examples/Velleman/K8200/Configuration_adv.h +++ b/config/examples/Velleman/K8200/Configuration_adv.h @@ -616,7 +616,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h index f14c971bab..6cef04b95c 100644 --- a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h +++ b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h index f14c971bab..6cef04b95c 100644 --- a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h +++ b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/WASP/PowerWASP/Configuration_adv.h b/config/examples/WASP/PowerWASP/Configuration_adv.h index 503d85ff09..f34f25f078 100644 --- a/config/examples/WASP/PowerWASP/Configuration_adv.h +++ b/config/examples/WASP/PowerWASP/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h index 554a4baaf4..5bd3a5ed07 100644 --- a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h index 0d3341859d..b2d5705296 100644 --- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h index bb1369cadb..7933fbca86 100644 --- a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h index 9da43ff54d..a557f80363 100644 --- a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h index 9da43ff54d..a557f80363 100644 --- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h index b3844e1834..05e35a6362 100644 --- a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h +++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/config/examples/delta/FLSUN/kossel/Configuration_adv.h index b3844e1834..05e35a6362 100644 --- a/config/examples/delta/FLSUN/kossel/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h index 3e6b8408b6..2b69997152 100644 --- a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h index dfe4a8c49b..696a961944 100644 --- a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h +++ b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/delta/MKS/SBASE/Configuration_adv.h b/config/examples/delta/MKS/SBASE/Configuration_adv.h index 429929536a..b9f6b65a98 100644 --- a/config/examples/delta/MKS/SBASE/Configuration_adv.h +++ b/config/examples/delta/MKS/SBASE/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/delta/Tevo Little Monster/Configuration_adv.h b/config/examples/delta/Tevo Little Monster/Configuration_adv.h index 466c95b732..8c36e633d6 100644 --- a/config/examples/delta/Tevo Little Monster/Configuration_adv.h +++ b/config/examples/delta/Tevo Little Monster/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/delta/generic/Configuration_adv.h b/config/examples/delta/generic/Configuration_adv.h index 3e6b8408b6..2b69997152 100644 --- a/config/examples/delta/generic/Configuration_adv.h +++ b/config/examples/delta/generic/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/delta/kossel_mini/Configuration_adv.h b/config/examples/delta/kossel_mini/Configuration_adv.h index 3e6b8408b6..2b69997152 100644 --- a/config/examples/delta/kossel_mini/Configuration_adv.h +++ b/config/examples/delta/kossel_mini/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/delta/kossel_xl/Configuration_adv.h b/config/examples/delta/kossel_xl/Configuration_adv.h index 3e90f2ec88..160d4b1292 100644 --- a/config/examples/delta/kossel_xl/Configuration_adv.h +++ b/config/examples/delta/kossel_xl/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/config/examples/gCreate/gMax1.5+/Configuration_adv.h index 7ef51e6b38..e8a4d02807 100644 --- a/config/examples/gCreate/gMax1.5+/Configuration_adv.h +++ b/config/examples/gCreate/gMax1.5+/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/makibox/Configuration_adv.h b/config/examples/makibox/Configuration_adv.h index bcf26d6a5d..655e9e769c 100644 --- a/config/examples/makibox/Configuration_adv.h +++ b/config/examples/makibox/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/tvrrug/Round2/Configuration_adv.h b/config/examples/tvrrug/Round2/Configuration_adv.h index 45203b6ace..ccfc0da921 100644 --- a/config/examples/tvrrug/Round2/Configuration_adv.h +++ b/config/examples/tvrrug/Round2/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34 diff --git a/config/examples/wt150/Configuration_adv.h b/config/examples/wt150/Configuration_adv.h index 5aad936fb5..f5936e6ca3 100644 --- a/config/examples/wt150/Configuration_adv.h +++ b/config/examples/wt150/Configuration_adv.h @@ -603,7 +603,8 @@ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align + #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } + // Set number of iterations to align #define Z_STEPPER_ALIGN_ITERATIONS 3 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G34