Add include guards to some headers

This commit is contained in:
Scott Lahteine 2019-07-04 22:44:12 -05:00
parent 8ff49d6b46
commit b6546ea33a
255 changed files with 251 additions and 5 deletions

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
/** /**
* This module is stripped down version of the LPC1768_PWM.h file from * This module is stripped down version of the LPC1768_PWM.h file from

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
/** /**
* Test Arduino Due specific configuration values for errors at compile-time. * Test Arduino Due specific configuration values for errors at compile-time.

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
#ifdef ARDUINO_ARCH_ESP32 #ifdef ARDUINO_ARCH_ESP32

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
#if ENABLED(EMERGENCY_PARSER) #if ENABLED(EMERGENCY_PARSER)
#error "EMERGENCY_PARSER is not yet implemented for ESP32. Disable EMERGENCY_PARSER to continue." #error "EMERGENCY_PARSER is not yet implemented for ESP32. Disable EMERGENCY_PARSER to continue."

View File

@ -19,3 +19,4 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
/** /**
* Test X86_64-specific configuration values for errors at compile-time. * Test X86_64-specific configuration values for errors at compile-time.

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
/** /**
* servo.h - Interrupt driven Servo library for Arduino using 16 bit timers- Version 2 * servo.h - Interrupt driven Servo library for Arduino using 16 bit timers- Version 2

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
/** /**
* Test LPC176x-specific configuration values for errors at compile-time. * Test LPC176x-specific configuration values for errors at compile-time.

View File

@ -19,7 +19,6 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once #pragma once
#include "../../shared/HAL_SPI.h" #include "../../shared/HAL_SPI.h"

View File

@ -19,6 +19,8 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
#include "../shared/persistent_store_api.h" #include "../shared/persistent_store_api.h"
#define FLASH_EEPROM_EMULATION #define FLASH_EEPROM_EMULATION

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
void u8g_i2c_init(uint8_t options); void u8g_i2c_init(uint8_t options);
uint8_t u8g_i2c_wait(uint8_t mask, uint8_t pos); uint8_t u8g_i2c_wait(uint8_t mask, uint8_t pos);

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
/** /**
* LPC1768 LCD-specific defines * LPC1768 LCD-specific defines

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
/** /**
* LCD delay routines - used by all the drivers. * LCD delay routines - used by all the drivers.

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
/** /**
* Low level pin manipulation routines - used by all the drivers. * Low level pin manipulation routines - used by all the drivers.

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
/** /**
* Test STM32F1-specific configuration values for errors at compile-time. * Test STM32F1-specific configuration values for errors at compile-time.

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
/** /**
* Test STM32F4-specific configuration values for errors at compile-time. * Test STM32F4-specific configuration values for errors at compile-time.

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
/** /**
* Test STM32F7-specific configuration values for errors at compile-time. * Test STM32F7-specific configuration values for errors at compile-time.

View File

@ -19,7 +19,6 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once #pragma once
#include <Servo.h> #include <Servo.h>

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
/** /**
* Description: HAL for * Description: HAL for

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
/** /**
* Test TEENSY35_36 specific configuration values for errors at compile-time. * Test TEENSY35_36 specific configuration values for errors at compile-time.

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
/** /**
* Endstop Interrupts * Endstop Interrupts

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
/** /**
* Fast I/O Routines for Teensy 3.5 and Teensy 3.6 * Fast I/O Routines for Teensy 3.5 and Teensy 3.6

View File

@ -19,7 +19,6 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once #pragma once
#define SCK_PIN 13 #define SCK_PIN 13

View File

@ -19,7 +19,6 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once #pragma once
#include "HAL.h" #include "HAL.h"

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
/** /**
* Test TEENSY35_36 specific configuration values for errors at compile-time. * Test TEENSY35_36 specific configuration values for errors at compile-time.

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
/** /**
* servo.h - Interrupt driven Servo library for Arduino using 16 bit timers- Version 2 * servo.h - Interrupt driven Servo library for Arduino using 16 bit timers- Version 2

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
// //
// Serial aliases for debugging. // Serial aliases for debugging.

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
#undef MIN #undef MIN
#undef MAX #undef MAX

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
/** /**
* This module is off by default, but can be enabled to facilitate the display of * This module is off by default, but can be enabled to facilitate the display of

View File

@ -19,7 +19,6 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once #pragma once
#include "../../inc/MarlinConfig.h" #include "../../inc/MarlinConfig.h"

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
/** /**
* gcode.h - Temporary container for all gcode handlers * gcode.h - Temporary container for all gcode handlers

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
// Use this file to select the com driver for device drivers that are NOT in the U8G library // Use this file to select the com driver for device drivers that are NOT in the U8G library

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
/** /**
* Standard Marlin Boot Screen bitmaps * Standard Marlin Boot Screen bitmaps

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
/** /**
* Standard Marlin Status Screen bitmaps * Standard Marlin Status Screen bitmaps

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
/** /**
Fontname: -Misc-Fixed-Medium-R-Normal--9-90-75-75-C-60-ISO10646-1 Fontname: -Misc-Fixed-Medium-R-Normal--9-90-75-75-C-60-ISO10646-1

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
/** /**
* ultralcd_DOGM.h * ultralcd_DOGM.h

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
// NOTE - the HAL version of the rrd device uses a generic ST7920 device. See the // NOTE - the HAL version of the rrd device uses a generic ST7920 device. See the
// file u8g_dev_st7920_128x64_HAL.cpp for the HAL version. // file u8g_dev_st7920_128x64_HAL.cpp for the HAL version.

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
/************ /************
* ui_api.h * * ui_api.h *

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
/** /**
* thermistornames.h * thermistornames.h

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
/** /**
* vector_3.cpp - Vector library for bed leveling * vector_3.cpp - Vector library for bed leveling

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
/** /**
* delta.h - Delta-specific functions * delta.h - Delta-specific functions

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
/** /**
* motion.h * motion.h

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
/** /**
* scara.h - SCARA-specific functions * scara.h - SCARA-specific functions

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
// R25 = 100 kOhm, beta25 = 4092 K, 4.7 kOhm pull-up, bed thermistor // R25 = 100 kOhm, beta25 = 4092 K, 4.7 kOhm pull-up, bed thermistor
const short temptable_1[][2] PROGMEM = { const short temptable_1[][2] PROGMEM = {

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
// R25 = 100 kOhm, beta25 = 3960 K, 4.7 kOhm pull-up, RS thermistor 198-961 // R25 = 100 kOhm, beta25 = 3960 K, 4.7 kOhm pull-up, RS thermistor 198-961
const short temptable_10[][2] PROGMEM = { const short temptable_10[][2] PROGMEM = {

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
// Pt1000 with 1k0 pullup // Pt1000 with 1k0 pullup
const short temptable_1010[][2] PROGMEM = { const short temptable_1010[][2] PROGMEM = {

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
// Pt1000 with 4k7 pullup // Pt1000 with 4k7 pullup
const short temptable_1047[][2] PROGMEM = { const short temptable_1047[][2] PROGMEM = {

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
// R25 = 100 kOhm, beta25 = 3950 K, 4.7 kOhm pull-up, QU-BD silicone bed QWG-104F-3950 thermistor // R25 = 100 kOhm, beta25 = 3950 K, 4.7 kOhm pull-up, QU-BD silicone bed QWG-104F-3950 thermistor
const short temptable_11[][2] PROGMEM = { const short temptable_11[][2] PROGMEM = {

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
// Pt100 with 1k0 pullup // Pt100 with 1k0 pullup
const short temptable_110[][2] PROGMEM = { const short temptable_110[][2] PROGMEM = {

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
// R25 = 100 kOhm, beta25 = 4700 K, 4.7 kOhm pull-up, (personal calibration for Makibox hot bed) // R25 = 100 kOhm, beta25 = 4700 K, 4.7 kOhm pull-up, (personal calibration for Makibox hot bed)
const short temptable_12[][2] PROGMEM = { const short temptable_12[][2] PROGMEM = {

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
// R25 = 100 kOhm, beta25 = 4100 K, 4.7 kOhm pull-up, Hisens thermistor // R25 = 100 kOhm, beta25 = 4100 K, 4.7 kOhm pull-up, Hisens thermistor
const short temptable_13[][2] PROGMEM = { const short temptable_13[][2] PROGMEM = {

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
// Pt100 with 4k7 pullup // Pt100 with 4k7 pullup
const short temptable_147[][2] PROGMEM = { const short temptable_147[][2] PROGMEM = {

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
// 100k bed thermistor in JGAurora A5. Calibrated by Sam Pinches 21st Jan 2018 using cheap k-type thermocouple inserted into heater block, using TM-902C meter. // 100k bed thermistor in JGAurora A5. Calibrated by Sam Pinches 21st Jan 2018 using cheap k-type thermocouple inserted into heater block, using TM-902C meter.
const short temptable_15[][2] PROGMEM = { const short temptable_15[][2] PROGMEM = {

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
// ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - version (measured/tested/approved) // ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - version (measured/tested/approved)
const short temptable_18[][2] PROGMEM = { const short temptable_18[][2] PROGMEM = {

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
// //
// R25 = 200 kOhm, beta25 = 4338 K, 4.7 kOhm pull-up, ATC Semitec 204GT-2 // R25 = 200 kOhm, beta25 = 4338 K, 4.7 kOhm pull-up, ATC Semitec 204GT-2

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
// PT100 with INA826 amp on Ultimaker v2.0 electronics // PT100 with INA826 amp on Ultimaker v2.0 electronics
// The PT100 in the Ultimaker v2.0 electronics has a high sample value for a high temperature. // The PT100 in the Ultimaker v2.0 electronics has a high sample value for a high temperature.

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
// R25 = 100 kOhm, beta25 = 4120 K, 4.7 kOhm pull-up, mendel-parts // R25 = 100 kOhm, beta25 = 4120 K, 4.7 kOhm pull-up, mendel-parts
const short temptable_3[][2] PROGMEM = { const short temptable_3[][2] PROGMEM = {

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
// R25 = 10 kOhm, beta25 = 3950 K, 4.7 kOhm pull-up, Generic 10k thermistor // R25 = 10 kOhm, beta25 = 3950 K, 4.7 kOhm pull-up, Generic 10k thermistor
const short temptable_4[][2] PROGMEM = { const short temptable_4[][2] PROGMEM = {

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
// R25 = 100 kOhm, beta25 = 4267 K, 4.7 kOhm pull-up // R25 = 100 kOhm, beta25 = 4267 K, 4.7 kOhm pull-up
// 100k ParCan thermistor (104GT-2) // 100k ParCan thermistor (104GT-2)

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
// 100k Zonestar thermistor. Adjusted By Hally // 100k Zonestar thermistor. Adjusted By Hally
const short temptable_501[][2] PROGMEM = { const short temptable_501[][2] PROGMEM = {

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
// R25 = 100 kOhm, beta25 = 4092 K, 1 kOhm pull-up, // R25 = 100 kOhm, beta25 = 4092 K, 1 kOhm pull-up,
// 100k EPCOS (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!) // 100k EPCOS (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!)

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
// R25 = 200 kOhm, beta25 = 4338 K, 1 kOhm pull-up, // R25 = 200 kOhm, beta25 = 4338 K, 1 kOhm pull-up,
// 200k ATC Semitec 204GT-2 (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!) // 200k ATC Semitec 204GT-2 (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!)

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
// R25 = 100 kOhm, beta25 = 4267 K, 1 kOhm pull-up, // R25 = 100 kOhm, beta25 = 4267 K, 1 kOhm pull-up,
// 100k ATC Semitec 104GT-2 (Used on ParCan) (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!) // 100k ATC Semitec 104GT-2 (Used on ParCan) (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!)

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
// R25 = 100 kOhm, beta25 = 4092 K, 8.2 kOhm pull-up, 100k Epcos (?) thermistor // R25 = 100 kOhm, beta25 = 4092 K, 8.2 kOhm pull-up, 100k Epcos (?) thermistor
const short temptable_6[][2] PROGMEM = { const short temptable_6[][2] PROGMEM = {

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
// R25 = 100 kOhm, beta25 = 3950 K, 4.7 kOhm pull-up, // R25 = 100 kOhm, beta25 = 3950 K, 4.7 kOhm pull-up,
// Maker's Tool Works Kapton Bed Thermistor // Maker's Tool Works Kapton Bed Thermistor

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
// R25 = 100 kOhm, beta25 = 3950 K, 4.7 kOhm pull-up, // R25 = 100 kOhm, beta25 = 3950 K, 4.7 kOhm pull-up,
// Formbot / Vivedino high temp 100k thermistor // Formbot / Vivedino high temp 100k thermistor

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
// R25 = 2.5 MOhm, beta25 = 4500 K, 4.7 kOhm pull-up, DyzeDesign 500 °C Thermistor // R25 = 2.5 MOhm, beta25 = 4500 K, 4.7 kOhm pull-up, DyzeDesign 500 °C Thermistor
const short temptable_66[][2] PROGMEM = { const short temptable_66[][2] PROGMEM = {

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
/** /**
* This file was generated by tltgen on Thu Jul 5 15:46:43 2018. * This file was generated by tltgen on Thu Jul 5 15:46:43 2018.

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
// R25 = 500 KOhm, beta25 = 3800 K, 4.7 kOhm pull-up, SliceEngineering 450 °C Thermistor // R25 = 500 KOhm, beta25 = 3800 K, 4.7 kOhm pull-up, SliceEngineering 450 °C Thermistor
const short temptable_67[][2] PROGMEM = { const short temptable_67[][2] PROGMEM = {

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
// R25 = 100 kOhm, beta25 = 3974 K, 4.7 kOhm pull-up, Honeywell 135-104LAG-J01 // R25 = 100 kOhm, beta25 = 3974 K, 4.7 kOhm pull-up, Honeywell 135-104LAG-J01
const short temptable_7[][2] PROGMEM = { const short temptable_7[][2] PROGMEM = {

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
// Stock BQ Hephestos 2 100k thermistor. // Stock BQ Hephestos 2 100k thermistor.
// Created on 29/12/2017 with an ambient temperature of 20C. // Created on 29/12/2017 with an ambient temperature of 20C.

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
// R25 = 100 kOhm, beta25 = 3974 K, 4.7 kOhm pull-up, Honeywell 135-104LAF-J01 // R25 = 100 kOhm, beta25 = 3974 K, 4.7 kOhm pull-up, Honeywell 135-104LAF-J01
// R0 = 100000 Ohm // R0 = 100000 Ohm

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
/** /**
* R25 = 100 kOhm, beta25 = 4100 K, 4.7 kOhm pull-up, * R25 = 100 kOhm, beta25 = 4100 K, 4.7 kOhm pull-up,

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
// R25 = 100 kOhm, beta25 = 3950 K, 10 kOhm pull-up, NTCS0603E3104FHT // R25 = 100 kOhm, beta25 = 3950 K, 10 kOhm pull-up, NTCS0603E3104FHT
const short temptable_8[][2] PROGMEM = { const short temptable_8[][2] PROGMEM = {

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
// R25 = 100 kOhm, beta25 = 3960 K, 4.7 kOhm pull-up, GE Sensing AL03006-58.2K-97-G1 // R25 = 100 kOhm, beta25 = 3960 K, 4.7 kOhm pull-up, GE Sensing AL03006-58.2K-97-G1
const short temptable_9[][2] PROGMEM = { const short temptable_9[][2] PROGMEM = {

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
// User-defined table 1 // User-defined table 1
// Dummy Thermistor table.. It will ALWAYS read a fixed value. // Dummy Thermistor table.. It will ALWAYS read a fixed value.

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
// User-defined table 2 // User-defined table 2
// Dummy Thermistor table.. It will ALWAYS read a fixed value. // Dummy Thermistor table.. It will ALWAYS read a fixed value.

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
/** /**
* 3DRAG (and K8200 / K8400) Arduino Mega with RAMPS v1.4 pin assignments * 3DRAG (and K8200 / K8400) Arduino Mega with RAMPS v1.4 pin assignments

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
/** /**
* Rev B 2 JUN 2017 * Rev B 2 JUN 2017

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
/** /**
* Arduino DUE Shield Kit (ADSK) pin assignments * Arduino DUE Shield Kit (ADSK) pin assignments

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
/** /**
* Alligator Board R2 * Alligator Board R2

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
/** /**
* Anet V1.0 board pin assignments * Anet V1.0 board pin assignments

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
/** /**
* ARCHIM1 pin assignment * ARCHIM1 pin assignment

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
/** /**
* ARCHIM2 pin assignment * ARCHIM2 pin assignment

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
#ifndef STM32F4 #ifndef STM32F4
#error "Oops! Select an STM32F4 board in 'Tools > Board.'" #error "Oops! Select an STM32F4 board in 'Tools > Board.'"

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
/** /**
* AZSMZ MINI pin assignments * AZSMZ MINI pin assignments

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
/** /**
* Azteeg X1 pin assignments * Azteeg X1 pin assignments

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
/** /**
* AZTEEG_X3 Arduino Mega with RAMPS v1.4 pin assignments * AZTEEG_X3 Arduino Mega with RAMPS v1.4 pin assignments

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
/** /**
* AZTEEG_X3_PRO (Arduino Mega) pin assignments * AZTEEG_X3_PRO (Arduino Mega) pin assignments

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
/** /**
* Azteeg X5 GT pin assignments * Azteeg X5 GT pin assignments

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
/** /**
* Azteeg X5 MINI pin assignments * Azteeg X5 MINI pin assignments

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
/** /**
* Azteeg X5 MINI pin assignments * Azteeg X5 MINI pin assignments

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
/** /**
* BAM&DICE Due (Arduino Mega) pin assignments * BAM&DICE Due (Arduino Mega) pin assignments

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
#if !defined(__STM32F1__) && !defined(__STM32F4__) #if !defined(__STM32F1__) && !defined(__STM32F4__)
#error "Oops! Select an STM32F1/4 board in 'Tools > Board.'" #error "Oops! Select an STM32F1/4 board in 'Tools > Board.'"

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
#ifndef TARGET_STM32F1 #ifndef TARGET_STM32F1
#error "Oops! Select an STM32F1 board in 'Tools > Board.'" #error "Oops! Select an STM32F1 board in 'Tools > Board.'"

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
#ifndef TARGET_LPC1768 #ifndef TARGET_LPC1768
#error "Oops! Make sure you have the LPC1768 environment selected in your IDE." #error "Oops! Make sure you have the LPC1768 environment selected in your IDE."

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
/** /**
* BIQU BQ111-A4 * BIQU BQ111-A4

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
/** /**
* BIQU BQ111-A4 * BIQU BQ111-A4

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
/** /**
* KFB 2.0 Arduino Mega2560 with RAMPS v1.4 pin assignments * KFB 2.0 Arduino Mega2560 with RAMPS v1.4 pin assignments

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
#ifndef TARGET_LPC1768 #ifndef TARGET_LPC1768
#error "Oops! Make sure you have the LPC1768 environment selected in your IDE." #error "Oops! Make sure you have the LPC1768 environment selected in your IDE."

Some files were not shown because too many files have changed in this diff Show More