Rename auto fan pins and add auto fan flags

This commit is contained in:
Scott Lahteine 2016-10-22 18:25:42 -05:00
parent ada935de87
commit b6aa894893
24 changed files with 349 additions and 223 deletions

View File

@ -426,20 +426,20 @@
#define HAS_HEATER_2 (PIN_EXISTS(HEATER_2)) #define HAS_HEATER_2 (PIN_EXISTS(HEATER_2))
#define HAS_HEATER_3 (PIN_EXISTS(HEATER_3)) #define HAS_HEATER_3 (PIN_EXISTS(HEATER_3))
#define HAS_HEATER_BED (PIN_EXISTS(HEATER_BED)) #define HAS_HEATER_BED (PIN_EXISTS(HEATER_BED))
#define HAS_AUTO_FAN_0 (PIN_EXISTS(EXTRUDER_0_AUTO_FAN)) #define HAS_AUTO_FAN_0 (PIN_EXISTS(E0_AUTO_FAN))
#define HAS_AUTO_FAN_1 (PIN_EXISTS(EXTRUDER_1_AUTO_FAN)) #define HAS_AUTO_FAN_1 (HOTENDS > 1 && PIN_EXISTS(E1_AUTO_FAN))
#define HAS_AUTO_FAN_2 (PIN_EXISTS(EXTRUDER_2_AUTO_FAN)) #define HAS_AUTO_FAN_2 (HOTENDS > 2 && PIN_EXISTS(E2_AUTO_FAN))
#define HAS_AUTO_FAN_3 (PIN_EXISTS(EXTRUDER_3_AUTO_FAN)) #define HAS_AUTO_FAN_3 (HOTENDS > 3 && PIN_EXISTS(E3_AUTO_FAN))
#define AUTO_1_IS_0 (EXTRUDER_1_AUTO_FAN_PIN == EXTRUDER_0_AUTO_FAN_PIN)
#define AUTO_2_IS_0 (EXTRUDER_2_AUTO_FAN_PIN == EXTRUDER_0_AUTO_FAN_PIN)
#define AUTO_2_IS_1 (EXTRUDER_2_AUTO_FAN_PIN == EXTRUDER_1_AUTO_FAN_PIN)
#define AUTO_3_IS_0 (EXTRUDER_3_AUTO_FAN_PIN == EXTRUDER_0_AUTO_FAN_PIN)
#define AUTO_3_IS_1 (EXTRUDER_3_AUTO_FAN_PIN == EXTRUDER_1_AUTO_FAN_PIN)
#define AUTO_3_IS_2 (EXTRUDER_3_AUTO_FAN_PIN == EXTRUDER_2_AUTO_FAN_PIN)
#define HAS_AUTO_FAN (HAS_AUTO_FAN_0 || HAS_AUTO_FAN_1 || HAS_AUTO_FAN_2 || HAS_AUTO_FAN_3) #define HAS_AUTO_FAN (HAS_AUTO_FAN_0 || HAS_AUTO_FAN_1 || HAS_AUTO_FAN_2 || HAS_AUTO_FAN_3)
#define AUTO_1_IS_0 (E1_AUTO_FAN_PIN == E0_AUTO_FAN_PIN)
#define AUTO_2_IS_0 (E2_AUTO_FAN_PIN == E0_AUTO_FAN_PIN)
#define AUTO_2_IS_1 (E2_AUTO_FAN_PIN == E1_AUTO_FAN_PIN)
#define AUTO_3_IS_0 (E3_AUTO_FAN_PIN == E0_AUTO_FAN_PIN)
#define AUTO_3_IS_1 (E3_AUTO_FAN_PIN == E1_AUTO_FAN_PIN)
#define AUTO_3_IS_2 (E3_AUTO_FAN_PIN == E2_AUTO_FAN_PIN)
#define HAS_FAN0 (PIN_EXISTS(FAN)) #define HAS_FAN0 (PIN_EXISTS(FAN))
#define HAS_FAN1 (PIN_EXISTS(FAN1) && CONTROLLERFAN_PIN != FAN1_PIN && EXTRUDER_0_AUTO_FAN_PIN != FAN1_PIN && EXTRUDER_1_AUTO_FAN_PIN != FAN1_PIN && EXTRUDER_2_AUTO_FAN_PIN != FAN1_PIN && EXTRUDER_3_AUTO_FAN_PIN != FAN1_PIN) #define HAS_FAN1 (PIN_EXISTS(FAN1) && CONTROLLERFAN_PIN != FAN1_PIN && E0_AUTO_FAN_PIN != FAN1_PIN && E1_AUTO_FAN_PIN != FAN1_PIN && E2_AUTO_FAN_PIN != FAN1_PIN && E3_AUTO_FAN_PIN != FAN1_PIN)
#define HAS_FAN2 (PIN_EXISTS(FAN2) && CONTROLLERFAN_PIN != FAN2_PIN && EXTRUDER_0_AUTO_FAN_PIN != FAN2_PIN && EXTRUDER_1_AUTO_FAN_PIN != FAN2_PIN && EXTRUDER_2_AUTO_FAN_PIN != FAN2_PIN && EXTRUDER_3_AUTO_FAN_PIN != FAN2_PIN) #define HAS_FAN2 (PIN_EXISTS(FAN2) && CONTROLLERFAN_PIN != FAN2_PIN && E0_AUTO_FAN_PIN != FAN2_PIN && E1_AUTO_FAN_PIN != FAN2_PIN && E2_AUTO_FAN_PIN != FAN2_PIN && E3_AUTO_FAN_PIN != FAN2_PIN)
#define HAS_CONTROLLERFAN (PIN_EXISTS(CONTROLLERFAN)) #define HAS_CONTROLLERFAN (PIN_EXISTS(CONTROLLERFAN))
#define HAS_SERVOS (defined(NUM_SERVOS) && NUM_SERVOS > 0) #define HAS_SERVOS (defined(NUM_SERVOS) && NUM_SERVOS > 0)
#define HAS_SERVO_0 (PIN_EXISTS(SERVO0)) #define HAS_SERVO_0 (PIN_EXISTS(SERVO0))

View File

@ -205,15 +205,22 @@
// @section extruder // @section extruder
// Extruder cooling fans /**
// Configure fan pin outputs to automatically turn on/off when the associated * Extruder cooling fans
// extruder temperature is above/below EXTRUDER_AUTO_FAN_TEMPERATURE. *
// Multiple extruders can be assigned to the same pin in which case * Extruder auto fans automatically turn on when their extruders'
// the fan will turn on when any selected extruder is above the threshold. * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE.
#define EXTRUDER_0_AUTO_FAN_PIN -1 *
#define EXTRUDER_1_AUTO_FAN_PIN -1 * Your board's pins file specifies the recommended pins. Override those here
#define EXTRUDER_2_AUTO_FAN_PIN -1 * or set to -1 to disable completely.
#define EXTRUDER_3_AUTO_FAN_PIN -1 *
* Multiple extruders can be assigned to the same pin in which case
* the fan will turn on when any selected extruder is above the threshold.
*/
#define E0_AUTO_FAN_PIN -1
#define E1_AUTO_FAN_PIN -1
#define E2_AUTO_FAN_PIN -1
#define E3_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed

View File

@ -678,14 +678,14 @@
*/ */
#if HAS_AUTO_FAN #if HAS_AUTO_FAN
#if HAS_FAN0 #if HAS_FAN0
#if EXTRUDER_0_AUTO_FAN_PIN == FAN_PIN #if E0_AUTO_FAN_PIN == FAN_PIN
#error "You cannot set EXTRUDER_0_AUTO_FAN_PIN equal to FAN_PIN." #error "You cannot set E0_AUTO_FAN_PIN equal to FAN_PIN."
#elif EXTRUDER_1_AUTO_FAN_PIN == FAN_PIN #elif E1_AUTO_FAN_PIN == FAN_PIN
#error "You cannot set EXTRUDER_1_AUTO_FAN_PIN equal to FAN_PIN." #error "You cannot set E1_AUTO_FAN_PIN equal to FAN_PIN."
#elif EXTRUDER_2_AUTO_FAN_PIN == FAN_PIN #elif E2_AUTO_FAN_PIN == FAN_PIN
#error "You cannot set EXTRUDER_2_AUTO_FAN_PIN equal to FAN_PIN." #error "You cannot set E2_AUTO_FAN_PIN equal to FAN_PIN."
#elif EXTRUDER_3_AUTO_FAN_PIN == FAN_PIN #elif E3_AUTO_FAN_PIN == FAN_PIN
#error "You cannot set EXTRUDER_3_AUTO_FAN_PIN equal to FAN_PIN." #error "You cannot set E3_AUTO_FAN_PIN equal to FAN_PIN."
#endif #endif
#endif #endif
#endif #endif
@ -695,14 +695,14 @@
#endif #endif
#if HAS_CONTROLLERFAN #if HAS_CONTROLLERFAN
#if EXTRUDER_0_AUTO_FAN_PIN == CONTROLLERFAN_PIN #if E0_AUTO_FAN_PIN == CONTROLLERFAN_PIN
#error "You cannot set EXTRUDER_0_AUTO_FAN_PIN equal to CONTROLLERFAN_PIN." #error "You cannot set E0_AUTO_FAN_PIN equal to CONTROLLERFAN_PIN."
#elif EXTRUDER_1_AUTO_FAN_PIN == CONTROLLERFAN_PIN #elif E1_AUTO_FAN_PIN == CONTROLLERFAN_PIN
#error "You cannot set EXTRUDER_1_AUTO_FAN_PIN equal to CONTROLLERFAN_PIN." #error "You cannot set E1_AUTO_FAN_PIN equal to CONTROLLERFAN_PIN."
#elif EXTRUDER_2_AUTO_FAN_PIN == CONTROLLERFAN_PIN #elif E2_AUTO_FAN_PIN == CONTROLLERFAN_PIN
#error "You cannot set EXTRUDER_2_AUTO_FAN_PIN equal to CONTROLLERFAN_PIN." #error "You cannot set E2_AUTO_FAN_PIN equal to CONTROLLERFAN_PIN."
#elif EXTRUDER_3_AUTO_FAN_PIN == CONTROLLERFAN_PIN #elif E3_AUTO_FAN_PIN == CONTROLLERFAN_PIN
#error "You cannot set EXTRUDER_3_AUTO_FAN_PIN equal to CONTROLLERFAN_PIN." #error "You cannot set E3_AUTO_FAN_PIN equal to CONTROLLERFAN_PIN."
#endif #endif
#endif #endif

View File

@ -205,15 +205,22 @@
// @section extruder // @section extruder
// Extruder cooling fans /**
// Configure fan pin outputs to automatically turn on/off when the associated * Extruder cooling fans
// extruder temperature is above/below EXTRUDER_AUTO_FAN_TEMPERATURE. *
// Multiple extruders can be assigned to the same pin in which case * Extruder auto fans automatically turn on when their extruders'
// the fan will turn on when any selected extruder is above the threshold. * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE.
#define EXTRUDER_0_AUTO_FAN_PIN 7 *
#define EXTRUDER_1_AUTO_FAN_PIN 7 * Your board's pins file specifies the recommended pins. Override those here
#define EXTRUDER_2_AUTO_FAN_PIN -1 * or set to -1 to disable completely.
#define EXTRUDER_3_AUTO_FAN_PIN -1 *
* Multiple extruders can be assigned to the same pin in which case
* the fan will turn on when any selected extruder is above the threshold.
*/
//#define E0_AUTO_FAN_PIN -1
//#define E1_AUTO_FAN_PIN -1
#define E2_AUTO_FAN_PIN -1
#define E3_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 35 #define EXTRUDER_AUTO_FAN_TEMPERATURE 35
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed

View File

@ -205,15 +205,22 @@
// @section extruder // @section extruder
// Extruder cooling fans /**
// Configure fan pin outputs to automatically turn on/off when the associated * Extruder cooling fans
// extruder temperature is above/below EXTRUDER_AUTO_FAN_TEMPERATURE. *
// Multiple extruders can be assigned to the same pin in which case * Extruder auto fans automatically turn on when their extruders'
// the fan will turn on when any selected extruder is above the threshold. * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE.
#define EXTRUDER_0_AUTO_FAN_PIN -1 *
#define EXTRUDER_1_AUTO_FAN_PIN -1 * Your board's pins file specifies the recommended pins. Override those here
#define EXTRUDER_2_AUTO_FAN_PIN -1 * or set to -1 to disable completely.
#define EXTRUDER_3_AUTO_FAN_PIN -1 *
* Multiple extruders can be assigned to the same pin in which case
* the fan will turn on when any selected extruder is above the threshold.
*/
#define E0_AUTO_FAN_PIN -1
#define E1_AUTO_FAN_PIN -1
#define E2_AUTO_FAN_PIN -1
#define E3_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed

View File

@ -205,15 +205,22 @@
// @section extruder // @section extruder
// Extruder cooling fans /**
// Configure fan pin outputs to automatically turn on/off when the associated * Extruder cooling fans
// extruder temperature is above/below EXTRUDER_AUTO_FAN_TEMPERATURE. *
// Multiple extruders can be assigned to the same pin in which case * Extruder auto fans automatically turn on when their extruders'
// the fan will turn on when any selected extruder is above the threshold. * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE.
#define EXTRUDER_0_AUTO_FAN_PIN -1 *
#define EXTRUDER_1_AUTO_FAN_PIN -1 * Your board's pins file specifies the recommended pins. Override those here
#define EXTRUDER_2_AUTO_FAN_PIN -1 * or set to -1 to disable completely.
#define EXTRUDER_3_AUTO_FAN_PIN -1 *
* Multiple extruders can be assigned to the same pin in which case
* the fan will turn on when any selected extruder is above the threshold.
*/
#define E0_AUTO_FAN_PIN -1
#define E1_AUTO_FAN_PIN -1
#define E2_AUTO_FAN_PIN -1
#define E3_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed

View File

@ -205,15 +205,22 @@
// @section extruder // @section extruder
// Extruder cooling fans /**
// Configure fan pin outputs to automatically turn on/off when the associated * Extruder cooling fans
// extruder temperature is above/below EXTRUDER_AUTO_FAN_TEMPERATURE. *
// Multiple extruders can be assigned to the same pin in which case * Extruder auto fans automatically turn on when their extruders'
// the fan will turn on when any selected extruder is above the threshold. * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE.
#define EXTRUDER_0_AUTO_FAN_PIN 11 *
#define EXTRUDER_1_AUTO_FAN_PIN 6 * Your board's pins file specifies the recommended pins. Override those here
#define EXTRUDER_2_AUTO_FAN_PIN -1 * or set to -1 to disable completely.
#define EXTRUDER_3_AUTO_FAN_PIN -1 *
* Multiple extruders can be assigned to the same pin in which case
* the fan will turn on when any selected extruder is above the threshold.
*/
//#define E0_AUTO_FAN_PIN -1
//#define E1_AUTO_FAN_PIN -1
#define E2_AUTO_FAN_PIN -1
#define E3_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed

View File

@ -211,15 +211,22 @@
// @section extruder // @section extruder
// Extruder cooling fans /**
// Configure fan pin outputs to automatically turn on/off when the associated * Extruder cooling fans
// extruder temperature is above/below EXTRUDER_AUTO_FAN_TEMPERATURE. *
// Multiple extruders can be assigned to the same pin in which case * Extruder auto fans automatically turn on when their extruders'
// the fan will turn on when any selected extruder is above the threshold. * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE.
#define EXTRUDER_0_AUTO_FAN_PIN -1 *
#define EXTRUDER_1_AUTO_FAN_PIN -1 * Your board's pins file specifies the recommended pins. Override those here
#define EXTRUDER_2_AUTO_FAN_PIN -1 * or set to -1 to disable completely.
#define EXTRUDER_3_AUTO_FAN_PIN -1 *
* Multiple extruders can be assigned to the same pin in which case
* the fan will turn on when any selected extruder is above the threshold.
*/
#define E0_AUTO_FAN_PIN -1
#define E1_AUTO_FAN_PIN -1
#define E2_AUTO_FAN_PIN -1
#define E3_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed

View File

@ -205,15 +205,22 @@
// @section extruder // @section extruder
// Extruder cooling fans /**
// Configure fan pin outputs to automatically turn on/off when the associated * Extruder cooling fans
// extruder temperature is above/below EXTRUDER_AUTO_FAN_TEMPERATURE. *
// Multiple extruders can be assigned to the same pin in which case * Extruder auto fans automatically turn on when their extruders'
// the fan will turn on when any selected extruder is above the threshold. * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE.
#define EXTRUDER_0_AUTO_FAN_PIN -1 *
#define EXTRUDER_1_AUTO_FAN_PIN -1 * Your board's pins file specifies the recommended pins. Override those here
#define EXTRUDER_2_AUTO_FAN_PIN -1 * or set to -1 to disable completely.
#define EXTRUDER_3_AUTO_FAN_PIN -1 *
* Multiple extruders can be assigned to the same pin in which case
* the fan will turn on when any selected extruder is above the threshold.
*/
#define E0_AUTO_FAN_PIN -1
#define E1_AUTO_FAN_PIN -1
#define E2_AUTO_FAN_PIN -1
#define E3_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed

View File

@ -205,15 +205,22 @@
// @section extruder // @section extruder
// Extruder cooling fans /**
// Configure fan pin outputs to automatically turn on/off when the associated * Extruder cooling fans
// extruder temperature is above/below EXTRUDER_AUTO_FAN_TEMPERATURE. *
// Multiple extruders can be assigned to the same pin in which case * Extruder auto fans automatically turn on when their extruders'
// the fan will turn on when any selected extruder is above the threshold. * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE.
#define EXTRUDER_0_AUTO_FAN_PIN -1 *
#define EXTRUDER_1_AUTO_FAN_PIN -1 * Your board's pins file specifies the recommended pins. Override those here
#define EXTRUDER_2_AUTO_FAN_PIN -1 * or set to -1 to disable completely.
#define EXTRUDER_3_AUTO_FAN_PIN -1 *
* Multiple extruders can be assigned to the same pin in which case
* the fan will turn on when any selected extruder is above the threshold.
*/
#define E0_AUTO_FAN_PIN -1
#define E1_AUTO_FAN_PIN -1
#define E2_AUTO_FAN_PIN -1
#define E3_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed

View File

@ -205,15 +205,22 @@
// @section extruder // @section extruder
// Extruder cooling fans /**
// Configure fan pin outputs to automatically turn on/off when the associated * Extruder cooling fans
// extruder temperature is above/below EXTRUDER_AUTO_FAN_TEMPERATURE. *
// Multiple extruders can be assigned to the same pin in which case * Extruder auto fans automatically turn on when their extruders'
// the fan will turn on when any selected extruder is above the threshold. * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE.
#define EXTRUDER_0_AUTO_FAN_PIN -1 *
#define EXTRUDER_1_AUTO_FAN_PIN -1 * Your board's pins file specifies the recommended pins. Override those here
#define EXTRUDER_2_AUTO_FAN_PIN -1 * or set to -1 to disable completely.
#define EXTRUDER_3_AUTO_FAN_PIN -1 *
* Multiple extruders can be assigned to the same pin in which case
* the fan will turn on when any selected extruder is above the threshold.
*/
#define E0_AUTO_FAN_PIN -1
#define E1_AUTO_FAN_PIN -1
#define E2_AUTO_FAN_PIN -1
#define E3_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed

View File

@ -213,15 +213,22 @@
// @section extruder // @section extruder
// Extruder cooling fans /**
// Configure fan pin outputs to automatically turn on/off when the associated * Extruder cooling fans
// extruder temperature is above/below EXTRUDER_AUTO_FAN_TEMPERATURE. *
// Multiple extruders can be assigned to the same pin in which case * Extruder auto fans automatically turn on when their extruders'
// the fan will turn on when any selected extruder is above the threshold. * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE.
#define EXTRUDER_0_AUTO_FAN_PIN -1 *
#define EXTRUDER_1_AUTO_FAN_PIN -1 * Your board's pins file specifies the recommended pins. Override those here
#define EXTRUDER_2_AUTO_FAN_PIN -1 * or set to -1 to disable completely.
#define EXTRUDER_3_AUTO_FAN_PIN -1 *
* Multiple extruders can be assigned to the same pin in which case
* the fan will turn on when any selected extruder is above the threshold.
*/
#define E0_AUTO_FAN_PIN -1
#define E1_AUTO_FAN_PIN -1
#define E2_AUTO_FAN_PIN -1
#define E3_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed

View File

@ -205,15 +205,22 @@
// @section extruder // @section extruder
// Extruder cooling fans /**
// Configure fan pin outputs to automatically turn on/off when the associated * Extruder cooling fans
// extruder temperature is above/below EXTRUDER_AUTO_FAN_TEMPERATURE. *
// Multiple extruders can be assigned to the same pin in which case * Extruder auto fans automatically turn on when their extruders'
// the fan will turn on when any selected extruder is above the threshold. * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE.
#define EXTRUDER_0_AUTO_FAN_PIN -1 *
#define EXTRUDER_1_AUTO_FAN_PIN -1 * Your board's pins file specifies the recommended pins. Override those here
#define EXTRUDER_2_AUTO_FAN_PIN -1 * or set to -1 to disable completely.
#define EXTRUDER_3_AUTO_FAN_PIN -1 *
* Multiple extruders can be assigned to the same pin in which case
* the fan will turn on when any selected extruder is above the threshold.
*/
#define E0_AUTO_FAN_PIN -1
#define E1_AUTO_FAN_PIN -1
#define E2_AUTO_FAN_PIN -1
#define E3_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed

View File

@ -205,15 +205,22 @@
// @section extruder // @section extruder
// Extruder cooling fans /**
// Configure fan pin outputs to automatically turn on/off when the associated * Extruder cooling fans
// extruder temperature is above/below EXTRUDER_AUTO_FAN_TEMPERATURE. *
// Multiple extruders can be assigned to the same pin in which case * Extruder auto fans automatically turn on when their extruders'
// the fan will turn on when any selected extruder is above the threshold. * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE.
#define EXTRUDER_0_AUTO_FAN_PIN -1 *
#define EXTRUDER_1_AUTO_FAN_PIN -1 * Your board's pins file specifies the recommended pins.
#define EXTRUDER_2_AUTO_FAN_PIN -1 * Override those here. Set to -1 to disable unused fans.
#define EXTRUDER_3_AUTO_FAN_PIN -1 *
* Multiple extruders can be assigned to the same pin in which case
* the fan will turn on when any selected extruder is above the threshold.
*/
#define E0_AUTO_FAN_PIN -1
#define E1_AUTO_FAN_PIN -1
#define E2_AUTO_FAN_PIN -1
#define E3_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed

View File

@ -205,15 +205,22 @@
// @section extruder // @section extruder
// Extruder cooling fans /**
// Configure fan pin outputs to automatically turn on/off when the associated * Extruder cooling fans
// extruder temperature is above/below EXTRUDER_AUTO_FAN_TEMPERATURE. *
// Multiple extruders can be assigned to the same pin in which case * Extruder auto fans automatically turn on when their extruders'
// the fan will turn on when any selected extruder is above the threshold. * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE.
#define EXTRUDER_0_AUTO_FAN_PIN -1 *
#define EXTRUDER_1_AUTO_FAN_PIN -1 * Your board's pins file specifies the recommended pins. Override those here
#define EXTRUDER_2_AUTO_FAN_PIN -1 * or set to -1 to disable completely.
#define EXTRUDER_3_AUTO_FAN_PIN -1 *
* Multiple extruders can be assigned to the same pin in which case
* the fan will turn on when any selected extruder is above the threshold.
*/
#define E0_AUTO_FAN_PIN -1
#define E1_AUTO_FAN_PIN -1
#define E2_AUTO_FAN_PIN -1
#define E3_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed

View File

@ -205,15 +205,22 @@
// @section extruder // @section extruder
// Extruder cooling fans /**
// Configure fan pin outputs to automatically turn on/off when the associated * Extruder cooling fans
// extruder temperature is above/below EXTRUDER_AUTO_FAN_TEMPERATURE. *
// Multiple extruders can be assigned to the same pin in which case * Extruder auto fans automatically turn on when their extruders'
// the fan will turn on when any selected extruder is above the threshold. * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE.
#define EXTRUDER_0_AUTO_FAN_PIN -1 *
#define EXTRUDER_1_AUTO_FAN_PIN -1 * Your board's pins file specifies the recommended pins. Override those here
#define EXTRUDER_2_AUTO_FAN_PIN -1 * or set to -1 to disable completely.
#define EXTRUDER_3_AUTO_FAN_PIN -1 *
* Multiple extruders can be assigned to the same pin in which case
* the fan will turn on when any selected extruder is above the threshold.
*/
#define E0_AUTO_FAN_PIN -1
#define E1_AUTO_FAN_PIN -1
#define E2_AUTO_FAN_PIN -1
#define E3_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed

View File

@ -210,15 +210,22 @@
// @section extruder // @section extruder
// Extruder cooling fans /**
// Configure fan pin outputs to automatically turn on/off when the associated * Extruder cooling fans
// extruder temperature is above/below EXTRUDER_AUTO_FAN_TEMPERATURE. *
// Multiple extruders can be assigned to the same pin in which case * Extruder auto fans automatically turn on when their extruders'
// the fan will turn on when any selected extruder is above the threshold. * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE.
#define EXTRUDER_0_AUTO_FAN_PIN -1 *
#define EXTRUDER_1_AUTO_FAN_PIN -1 * Your board's pins file specifies the recommended pins. Override those here
#define EXTRUDER_2_AUTO_FAN_PIN -1 * or set to -1 to disable completely.
#define EXTRUDER_3_AUTO_FAN_PIN -1 *
* Multiple extruders can be assigned to the same pin in which case
* the fan will turn on when any selected extruder is above the threshold.
*/
#define E0_AUTO_FAN_PIN -1
#define E1_AUTO_FAN_PIN -1
#define E2_AUTO_FAN_PIN -1
#define E3_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed

View File

@ -205,15 +205,22 @@
// @section extruder // @section extruder
// Extruder cooling fans /**
// Configure fan pin outputs to automatically turn on/off when the associated * Extruder cooling fans
// extruder temperature is above/below EXTRUDER_AUTO_FAN_TEMPERATURE. *
// Multiple extruders can be assigned to the same pin in which case * Extruder auto fans automatically turn on when their extruders'
// the fan will turn on when any selected extruder is above the threshold. * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE.
#define EXTRUDER_0_AUTO_FAN_PIN -1 *
#define EXTRUDER_1_AUTO_FAN_PIN -1 * Your board's pins file specifies the recommended pins. Override those here
#define EXTRUDER_2_AUTO_FAN_PIN -1 * or set to -1 to disable completely.
#define EXTRUDER_3_AUTO_FAN_PIN -1 *
* Multiple extruders can be assigned to the same pin in which case
* the fan will turn on when any selected extruder is above the threshold.
*/
#define E0_AUTO_FAN_PIN -1
#define E1_AUTO_FAN_PIN -1
#define E2_AUTO_FAN_PIN -1
#define E3_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed

View File

@ -205,15 +205,22 @@
// @section extruder // @section extruder
// Extruder cooling fans /**
// Configure fan pin outputs to automatically turn on/off when the associated * Extruder cooling fans
// extruder temperature is above/below EXTRUDER_AUTO_FAN_TEMPERATURE. *
// Multiple extruders can be assigned to the same pin in which case * Extruder auto fans automatically turn on when their extruders'
// the fan will turn on when any selected extruder is above the threshold. * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE.
#define EXTRUDER_0_AUTO_FAN_PIN -1 *
#define EXTRUDER_1_AUTO_FAN_PIN -1 * Your board's pins file specifies the recommended pins. Override those here
#define EXTRUDER_2_AUTO_FAN_PIN -1 * or set to -1 to disable completely.
#define EXTRUDER_3_AUTO_FAN_PIN -1 *
* Multiple extruders can be assigned to the same pin in which case
* the fan will turn on when any selected extruder is above the threshold.
*/
#define E0_AUTO_FAN_PIN -1
#define E1_AUTO_FAN_PIN -1
#define E2_AUTO_FAN_PIN -1
#define E3_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed

View File

@ -205,15 +205,22 @@
// @section extruder // @section extruder
// Extruder cooling fans /**
// Configure fan pin outputs to automatically turn on/off when the associated * Extruder cooling fans
// extruder temperature is above/below EXTRUDER_AUTO_FAN_TEMPERATURE. *
// Multiple extruders can be assigned to the same pin in which case * Extruder auto fans automatically turn on when their extruders'
// the fan will turn on when any selected extruder is above the threshold. * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE.
#define EXTRUDER_0_AUTO_FAN_PIN -1 *
#define EXTRUDER_1_AUTO_FAN_PIN -1 * Your board's pins file specifies the recommended pins. Override those here
#define EXTRUDER_2_AUTO_FAN_PIN -1 * or set to -1 to disable completely.
#define EXTRUDER_3_AUTO_FAN_PIN -1 *
* Multiple extruders can be assigned to the same pin in which case
* the fan will turn on when any selected extruder is above the threshold.
*/
#define E0_AUTO_FAN_PIN -1
#define E1_AUTO_FAN_PIN -1
#define E2_AUTO_FAN_PIN -1
#define E3_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed

View File

@ -306,7 +306,7 @@
#endif #endif
#endif #endif
#define _H0_PINS HEATER_0_PIN, EXTRUDER_0_AUTO_FAN_PIN, marlinAnalogInputToDigitalPin(TEMP_0_PIN), #define _H0_PINS HEATER_0_PIN, E0_AUTO_FAN_PIN, marlinAnalogInputToDigitalPin(TEMP_0_PIN),
#define _H1_PINS #define _H1_PINS
#define _H2_PINS #define _H2_PINS
#define _H3_PINS #define _H3_PINS
@ -314,13 +314,13 @@
#if HOTENDS > 1 #if HOTENDS > 1
#undef _H1_PINS #undef _H1_PINS
#define _H1_PINS HEATER_1_PIN, EXTRUDER_1_AUTO_FAN_PIN, marlinAnalogInputToDigitalPin(TEMP_1_PIN), #define _H1_PINS HEATER_1_PIN, E1_AUTO_FAN_PIN, marlinAnalogInputToDigitalPin(TEMP_1_PIN),
#if HOTENDS > 2 #if HOTENDS > 2
#undef _H2_PINS #undef _H2_PINS
#define _H2_PINS HEATER_2_PIN, EXTRUDER_2_AUTO_FAN_PIN, marlinAnalogInputToDigitalPin(TEMP_2_PIN), #define _H2_PINS HEATER_2_PIN, E2_AUTO_FAN_PIN, marlinAnalogInputToDigitalPin(TEMP_2_PIN),
#if HOTENDS > 3 #if HOTENDS > 3
#undef _H3_PINS #undef _H3_PINS
#define _H3_PINS HEATER_3_PIN, EXTRUDER_3_AUTO_FAN_PIN, marlinAnalogInputToDigitalPin(TEMP_3_PIN), #define _H3_PINS HEATER_3_PIN, E3_AUTO_FAN_PIN, marlinAnalogInputToDigitalPin(TEMP_3_PIN),
#if HOTENDS > 4 #if HOTENDS > 4
#undef _H4_PINS #undef _H4_PINS
#define _H4_PINS HEATER_4_PIN, marlinAnalogInputToDigitalPin(TEMP_4_PIN), #define _H4_PINS HEATER_4_PIN, marlinAnalogInputToDigitalPin(TEMP_4_PIN),

View File

@ -234,17 +234,17 @@ static bool report_pin_name(int8_t pin) {
#if PIN_EXISTS(CONTROLLERFAN) #if PIN_EXISTS(CONTROLLERFAN)
PIN_SAY(CONTROLLERFAN_PIN); PIN_SAY(CONTROLLERFAN_PIN);
#endif #endif
#if PIN_EXISTS(EXTRUDER_0_AUTO_FAN) #if PIN_EXISTS(E0_AUTO_FAN)
PIN_SAY(EXTRUDER_0_AUTO_FAN_PIN); PIN_SAY(E0_AUTO_FAN_PIN);
#endif #endif
#if PIN_EXISTS(EXTRUDER_1_AUTO_FAN) #if PIN_EXISTS(E1_AUTO_FAN)
PIN_SAY(EXTRUDER_1_AUTO_FAN_PIN); PIN_SAY(E1_AUTO_FAN_PIN);
#endif #endif
#if PIN_EXISTS(EXTRUDER_2_AUTO_FAN) #if PIN_EXISTS(E2_AUTO_FAN)
PIN_SAY(EXTRUDER_2_AUTO_FAN_PIN); PIN_SAY(E2_AUTO_FAN_PIN);
#endif #endif
#if PIN_EXISTS(EXTRUDER_3_AUTO_FAN) #if PIN_EXISTS(E3_AUTO_FAN)
PIN_SAY(EXTRUDER_3_AUTO_FAN_PIN); PIN_SAY(E3_AUTO_FAN_PIN);
#endif #endif
#if PIN_EXISTS(HEATER_0) #if PIN_EXISTS(HEATER_0)
PIN_SAY(HEATER_0_PIN); PIN_SAY(HEATER_0_PIN);

View File

@ -106,10 +106,10 @@
#define CONTROLLERFAN_PIN 4 // Pin used for the fan to cool motherboard (-1 to disable) #define CONTROLLERFAN_PIN 4 // Pin used for the fan to cool motherboard (-1 to disable)
// Fans/Water Pump to cool the hotend cool side. // Fans/Water Pump to cool the hotend cool side.
#define EXTRUDER_0_AUTO_FAN_PIN 5 #define E0_AUTO_FAN_PIN 5
#define EXTRUDER_1_AUTO_FAN_PIN 5 #define E1_AUTO_FAN_PIN 5
#define EXTRUDER_2_AUTO_FAN_PIN 5 #define E2_AUTO_FAN_PIN 5
#define EXTRUDER_3_AUTO_FAN_PIN 5 #define E3_AUTO_FAN_PIN 5
// //
// LCD / Controller // LCD / Controller

View File

@ -454,7 +454,7 @@ int Temperature::getHeaterPower(int heater) {
#if HAS_AUTO_FAN #if HAS_AUTO_FAN
void Temperature::checkExtruderAutoFans() { void Temperature::checkExtruderAutoFans() {
const int8_t fanPin[] = { EXTRUDER_0_AUTO_FAN_PIN, EXTRUDER_1_AUTO_FAN_PIN, EXTRUDER_2_AUTO_FAN_PIN, EXTRUDER_3_AUTO_FAN_PIN }; const int8_t fanPin[] = { E0_AUTO_FAN_PIN, E1_AUTO_FAN_PIN, E2_AUTO_FAN_PIN, E3_AUTO_FAN_PIN };
const int fanBit[] = { const int fanBit[] = {
0, 0,
AUTO_1_IS_0 ? 0 : 1, AUTO_1_IS_0 ? 0 : 1,
@ -1043,43 +1043,43 @@ void Temperature::init() {
#endif #endif
#if HAS_AUTO_FAN_0 #if HAS_AUTO_FAN_0
#if EXTRUDER_0_AUTO_FAN_PIN == FAN1_PIN #if E0_AUTO_FAN_PIN == FAN1_PIN
SET_OUTPUT(EXTRUDER_0_AUTO_FAN_PIN); SET_OUTPUT(E0_AUTO_FAN_PIN);
#if ENABLED(FAST_PWM_FAN) #if ENABLED(FAST_PWM_FAN)
setPwmFrequency(EXTRUDER_0_AUTO_FAN_PIN, 1); // No prescaling. Pwm frequency = F_CPU/256/8 setPwmFrequency(E0_AUTO_FAN_PIN, 1); // No prescaling. Pwm frequency = F_CPU/256/8
#endif #endif
#else #else
pinMode(EXTRUDER_0_AUTO_FAN_PIN, OUTPUT); pinMode(E0_AUTO_FAN_PIN, OUTPUT);
#endif #endif
#endif #endif
#if HAS_AUTO_FAN_1 && !AUTO_1_IS_0 #if HAS_AUTO_FAN_1 && !AUTO_1_IS_0
#if EXTRUDER_1_AUTO_FAN_PIN == FAN1_PIN #if E1_AUTO_FAN_PIN == FAN1_PIN
SET_OUTPUT(EXTRUDER_1_AUTO_FAN_PIN); SET_OUTPUT(E1_AUTO_FAN_PIN);
#if ENABLED(FAST_PWM_FAN) #if ENABLED(FAST_PWM_FAN)
setPwmFrequency(EXTRUDER_1_AUTO_FAN_PIN, 1); // No prescaling. Pwm frequency = F_CPU/256/8 setPwmFrequency(E1_AUTO_FAN_PIN, 1); // No prescaling. Pwm frequency = F_CPU/256/8
#endif #endif
#else #else
pinMode(EXTRUDER_1_AUTO_FAN_PIN, OUTPUT); pinMode(E1_AUTO_FAN_PIN, OUTPUT);
#endif #endif
#endif #endif
#if HAS_AUTO_FAN_2 && !AUTO_2_IS_0 && !AUTO_2_IS_1 #if HAS_AUTO_FAN_2 && !AUTO_2_IS_0 && !AUTO_2_IS_1
#if EXTRUDER_2_AUTO_FAN_PIN == FAN1_PIN #if E2_AUTO_FAN_PIN == FAN1_PIN
SET_OUTPUT(EXTRUDER_2_AUTO_FAN_PIN); SET_OUTPUT(E2_AUTO_FAN_PIN);
#if ENABLED(FAST_PWM_FAN) #if ENABLED(FAST_PWM_FAN)
setPwmFrequency(EXTRUDER_2_AUTO_FAN_PIN, 1); // No prescaling. Pwm frequency = F_CPU/256/8 setPwmFrequency(E2_AUTO_FAN_PIN, 1); // No prescaling. Pwm frequency = F_CPU/256/8
#endif #endif
#else #else
pinMode(EXTRUDER_2_AUTO_FAN_PIN, OUTPUT); pinMode(E2_AUTO_FAN_PIN, OUTPUT);
#endif #endif
#endif #endif
#if HAS_AUTO_FAN_3 && !AUTO_3_IS_0 && !AUTO_3_IS_1 && !AUTO_3_IS_2 #if HAS_AUTO_FAN_3 && !AUTO_3_IS_0 && !AUTO_3_IS_1 && !AUTO_3_IS_2
#if EXTRUDER_3_AUTO_FAN_PIN == FAN1_PIN #if E3_AUTO_FAN_PIN == FAN1_PIN
SET_OUTPUT(EXTRUDER_3_AUTO_FAN_PIN); SET_OUTPUT(E3_AUTO_FAN_PIN);
#if ENABLED(FAST_PWM_FAN) #if ENABLED(FAST_PWM_FAN)
setPwmFrequency(EXTRUDER_3_AUTO_FAN_PIN, 1); // No prescaling. Pwm frequency = F_CPU/256/8 setPwmFrequency(E3_AUTO_FAN_PIN, 1); // No prescaling. Pwm frequency = F_CPU/256/8
#endif #endif
#else #else
pinMode(EXTRUDER_3_AUTO_FAN_PIN, OUTPUT); pinMode(E3_AUTO_FAN_PIN, OUTPUT);
#endif #endif
#endif #endif