From b76344c080ce0b7f651290dcfeecc6b815fea916 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Thu, 10 May 2018 00:05:15 -0500 Subject: [PATCH] More Trinamic cleanup --- Marlin/src/feature/tmc_util.h | 6 +- Marlin/src/gcode/feature/trinamic/M906.cpp | 2 +- .../src/gcode/feature/trinamic/M911-M915.cpp | 126 ++++++++++-------- Marlin/src/module/configuration_store.cpp | 2 +- Marlin/src/module/stepper_indirection.cpp | 7 +- 5 files changed, 83 insertions(+), 60 deletions(-) diff --git a/Marlin/src/feature/tmc_util.h b/Marlin/src/feature/tmc_util.h index 00560d0ef9..094b65e9b7 100644 --- a/Marlin/src/feature/tmc_util.h +++ b/Marlin/src/feature/tmc_util.h @@ -53,7 +53,7 @@ void tmc_get_current(TMC &st, const TMC_AxisEnum axis) { _tmc_say_current(axis, st.getCurrent()); } template -void tmc_set_current(TMC &st, const TMC_AxisEnum axis, const int mA) { +void tmc_set_current(TMC &st, const int mA) { st.setCurrent(mA, R_SENSE, HOLD_MULTIPLIER); } template @@ -70,7 +70,7 @@ void tmc_get_pwmthrs(TMC &st, const TMC_AxisEnum axis, const uint16_t spmm) { _tmc_say_pwmthrs(axis, _tmc_thrs(st.microsteps(), st.TPWMTHRS(), spmm)); } template -void tmc_set_pwmthrs(TMC &st, const TMC_AxisEnum axis, const int32_t thrs, const uint32_t spmm) { +void tmc_set_pwmthrs(TMC &st, const int32_t thrs, const uint32_t spmm) { st.TPWMTHRS(_tmc_thrs(st.microsteps(), thrs, spmm)); } template @@ -78,7 +78,7 @@ void tmc_get_sgt(TMC &st, const TMC_AxisEnum axis) { _tmc_say_sgt(axis, st.sgt()); } template -void tmc_set_sgt(TMC &st, const TMC_AxisEnum axis, const int8_t sgt_val) { +void tmc_set_sgt(TMC &st, const int8_t sgt_val) { st.sgt(sgt_val); } diff --git a/Marlin/src/gcode/feature/trinamic/M906.cpp b/Marlin/src/gcode/feature/trinamic/M906.cpp index 8ba6453339..1ac22641cf 100644 --- a/Marlin/src/gcode/feature/trinamic/M906.cpp +++ b/Marlin/src/gcode/feature/trinamic/M906.cpp @@ -34,7 +34,7 @@ */ void GcodeSuite::M906() { #define TMC_SAY_CURRENT(Q) tmc_get_current(stepper##Q, TMC_##Q) - #define TMC_SET_CURRENT(Q) tmc_set_current(stepper##Q, TMC_##Q, value) + #define TMC_SET_CURRENT(Q) tmc_set_current(stepper##Q, value) bool report = true; const uint8_t index = parser.byteval('I'); diff --git a/Marlin/src/gcode/feature/trinamic/M911-M915.cpp b/Marlin/src/gcode/feature/trinamic/M911-M915.cpp index d2f755344e..1e29babae9 100644 --- a/Marlin/src/gcode/feature/trinamic/M911-M915.cpp +++ b/Marlin/src/gcode/feature/trinamic/M911-M915.cpp @@ -30,42 +30,48 @@ #include "../../../module/planner.h" #include "../../queue.h" +#define M91x_USE(A) (ENABLED(A##_IS_TMC2130) || (ENABLED(A##_IS_TMC2208) && PIN_EXISTS(A##_SERIAL_RX))) +#define M91x_USE_X (ENABLED(IS_TRAMS) || M91x_USE(X)) +#define M91x_USE_Y (ENABLED(IS_TRAMS) || M91x_USE(Y)) +#define M91x_USE_Z (ENABLED(IS_TRAMS) || M91x_USE(Z)) +#define M91x_USE_E0 (ENABLED(IS_TRAMS) || M91x_USE(E0)) + /** * M911: Report TMC stepper driver overtemperature pre-warn flag * This flag is held by the library, persisting until cleared by M912 */ void GcodeSuite::M911() { - #if ENABLED(X_IS_TMC2130) || (ENABLED(X_IS_TMC2208) && PIN_EXISTS(X_SERIAL_RX)) || ENABLED(IS_TRAMS) + #if M91x_USE_X tmc_report_otpw(stepperX, TMC_X); #endif - #if ENABLED(X2_IS_TMC2130) || (ENABLED(X2_IS_TMC2208) && PIN_EXISTS(X2_SERIAL_RX)) + #if M91x_USE(X2) tmc_report_otpw(stepperX2, TMC_X2); #endif - #if ENABLED(Y_IS_TMC2130) || (ENABLED(Y_IS_TMC2208) && PIN_EXISTS(Y_SERIAL_RX)) || ENABLED(IS_TRAMS) + #if M91x_USE_Y tmc_report_otpw(stepperY, TMC_Y); #endif - #if ENABLED(Y2_IS_TMC2130) || (ENABLED(Y2_IS_TMC2208) && PIN_EXISTS(Y2_SERIAL_RX)) + #if M91x_USE(Y2) tmc_report_otpw(stepperY2, TMC_Y2); #endif - #if ENABLED(Z_IS_TMC2130) || (ENABLED(Z_IS_TMC2208) && PIN_EXISTS(Z_SERIAL_RX)) || ENABLED(IS_TRAMS) + #if M91x_USE_Z tmc_report_otpw(stepperZ, TMC_Z); #endif - #if ENABLED(Z2_IS_TMC2130) || (ENABLED(Z2_IS_TMC2208) && PIN_EXISTS(Z2_SERIAL_RX)) + #if M91x_USE(Z2) tmc_report_otpw(stepperZ2, TMC_Z2); #endif - #if ENABLED(E0_IS_TMC2130) || (ENABLED(E0_IS_TMC2208) && PIN_EXISTS(E0_SERIAL_RX)) || ENABLED(IS_TRAMS) + #if M91x_USE_E0 tmc_report_otpw(stepperE0, TMC_E0); #endif - #if ENABLED(E1_IS_TMC2130) || (ENABLED(E1_IS_TMC2208) && PIN_EXISTS(E1_SERIAL_RX)) + #if M91x_USE(E1) tmc_report_otpw(stepperE1, TMC_E1); #endif - #if ENABLED(E2_IS_TMC2130) || (ENABLED(E2_IS_TMC2208) && PIN_EXISTS(E2_SERIAL_RX)) + #if M91x_USE(E2) tmc_report_otpw(stepperE2, TMC_E2); #endif - #if ENABLED(E3_IS_TMC2130) || (ENABLED(E3_IS_TMC2208) && PIN_EXISTS(E3_SERIAL_RX)) + #if M91x_USE(E3) tmc_report_otpw(stepperE3, TMC_E3); #endif - #if ENABLED(E4_IS_TMC2130) || (ENABLED(E4_IS_TMC2208) && PIN_EXISTS(E4_SERIAL_RX)) + #if M91x_USE(E4) tmc_report_otpw(stepperE4, TMC_E4); #endif } @@ -83,45 +89,61 @@ void GcodeSuite::M911() { * M912 E1 ; clear E1 only */ void GcodeSuite::M912() { - const bool hasX = parser.seen(axis_codes[X_AXIS]), hasY = parser.seen(axis_codes[Y_AXIS]), - hasZ = parser.seen(axis_codes[Z_AXIS]), hasE = parser.seen(axis_codes[E_AXIS]), - hasNone = !hasX && !hasY && !hasZ && !hasE; - const uint8_t xval = parser.byteval(axis_codes[X_AXIS], 10), yval = parser.byteval(axis_codes[Y_AXIS], 10), - zval = parser.byteval(axis_codes[Z_AXIS], 10), eval = parser.byteval(axis_codes[E_AXIS], 10); + const bool hasX = parser.seen(axis_codes[X_AXIS]), + hasY = parser.seen(axis_codes[Y_AXIS]), + hasZ = parser.seen(axis_codes[Z_AXIS]), + hasE = parser.seen(axis_codes[E_AXIS]), + hasNone = !hasX && !hasY && !hasZ && !hasE; - #if (ENABLED(X_IS_TMC2130) || (ENABLED(X_IS_TMC2208) && PIN_EXISTS(X_SERIAL_RX)) || ENABLED(IS_TRAMS)) - if (hasNone || xval == 1 || (hasX && xval == 10)) tmc_clear_otpw(stepperX, TMC_X); - #endif - #if (ENABLED(X2_IS_TMC2130) || (ENABLED(X2_IS_TMC2208) && PIN_EXISTS(X2_SERIAL_RX))) - if (hasNone || xval == 2 || (hasX && xval == 10)) tmc_clear_otpw(stepperX2, TMC_X2); - #endif - #if (ENABLED(Y_IS_TMC2130) || (ENABLED(Y_IS_TMC2208) && PIN_EXISTS(Y_SERIAL_RX)) || ENABLED(IS_TRAMS)) - if (hasNone || yval == 1 || (hasY && yval == 10)) tmc_clear_otpw(stepperY, TMC_Y); - #endif - #if (ENABLED(Y2_IS_TMC2130) || (ENABLED(Y2_IS_TMC2208) && PIN_EXISTS(Y2_SERIAL_RX))) - if (hasNone || yval == 2 || (hasY && yval == 10)) tmc_clear_otpw(stepperY2, TMC_Y2); - #endif - #if (ENABLED(Z_IS_TMC2130) || (ENABLED(Z_IS_TMC2208) && PIN_EXISTS(Z_SERIAL_RX)) || ENABLED(IS_TRAMS)) - if (hasNone || zval == 1 || (hasZ && zval == 10)) tmc_clear_otpw(stepperZ, TMC_Z); - #endif - #if (ENABLED(Z2_IS_TMC2130) || (ENABLED(Z2_IS_TMC2208) && PIN_EXISTS(Z2_SERIAL_RX))) - if (hasNone || zval == 2 || (hasZ && zval == 10)) tmc_clear_otpw(stepperZ2, TMC_Z2); - #endif - #if (ENABLED(E0_IS_TMC2130) || (ENABLED(E0_IS_TMC2208) && PIN_EXISTS(E0_SERIAL_RX)) || ENABLED(IS_TRAMS)) - if (hasNone || eval == 0 || (hasE && eval == 10)) tmc_clear_otpw(stepperE0, TMC_E0); - #endif - #if E_STEPPERS > 1 && (ENABLED(E1_IS_TMC2130) || (ENABLED(E1_IS_TMC2208) && PIN_EXISTS(E1_SERIAL_RX))) - if (hasNone || eval == 1 || (hasE && eval == 10)) tmc_clear_otpw(stepperE1, TMC_E1); - #endif - #if E_STEPPERS > 2 && (ENABLED(E2_IS_TMC2130) || (ENABLED(E2_IS_TMC2208) && PIN_EXISTS(E2_SERIAL_RX))) - if (hasNone || eval == 2 || (hasE && eval == 10)) tmc_clear_otpw(stepperE2, TMC_E2); - #endif - #if E_STEPPERS > 3 && (ENABLED(E3_IS_TMC2130) || (ENABLED(E3_IS_TMC2208) && PIN_EXISTS(E3_SERIAL_RX))) - if (hasNone || eval == 3 || (hasE && eval == 10)) tmc_clear_otpw(stepperE3, TMC_E3); - #endif - #if E_STEPPERS > 4 && (ENABLED(E4_IS_TMC2130) || (ENABLED(E4_IS_TMC2208) && PIN_EXISTS(E4_SERIAL_RX))) - if (hasNone || eval == 4 || (hasE && eval == 10)) tmc_clear_otpw(stepperE4, TMC_E4); - #endif + #if M91x_USE_X || M91x_USE(X2) + const uint8_t xval = parser.byteval(axis_codes[X_AXIS], 10); + #if M91x_USE_X + if (hasNone || xval == 1 || (hasX && xval == 10)) tmc_clear_otpw(stepperX, TMC_X); + #endif + #if M91x_USE(X2) + if (hasNone || xval == 2 || (hasX && xval == 10)) tmc_clear_otpw(stepperX2, TMC_X2); + #endif + #endif + + #define M91x_USE_Y (M91x_USE(Y) || ENABLED(IS_TRAMS)) + #if M91x_USE_Y || M91x_USE(Y2) + const uint8_t yval = parser.byteval(axis_codes[Y_AXIS], 10); + #if M91x_USE_Y + if (hasNone || yval == 1 || (hasY && yval == 10)) tmc_clear_otpw(stepperY, TMC_Y); + #endif + #if M91x_USE(Y2) + if (hasNone || yval == 2 || (hasY && yval == 10)) tmc_clear_otpw(stepperY2, TMC_Y2); + #endif + #endif + + #define M91x_USE_Z (M91x_USE(Z) || ENABLED(IS_TRAMS)) + #if M91x_USE_Z || M91x_USE(Z2) + const uint8_t zval = parser.byteval(axis_codes[Z_AXIS], 10); + #if M91x_USE_Z + if (hasNone || zval == 1 || (hasZ && zval == 10)) tmc_clear_otpw(stepperZ, TMC_Z); + #endif + #if M91x_USE(Z2) + if (hasNone || zval == 2 || (hasZ && zval == 10)) tmc_clear_otpw(stepperZ2, TMC_Z2); + #endif + #endif + + const uint8_t eval = parser.byteval(axis_codes[E_AXIS], 10); + + #if M91x_USE_E0 + if (hasNone || eval == 0 || (hasE && eval == 10)) tmc_clear_otpw(stepperE0, TMC_E0); + #endif + #if E_STEPPERS > 1 && M91x_USE(E1) + if (hasNone || eval == 1 || (hasE && eval == 10)) tmc_clear_otpw(stepperE1, TMC_E1); + #endif + #if E_STEPPERS > 2 && M91x_USE(E2) + if (hasNone || eval == 2 || (hasE && eval == 10)) tmc_clear_otpw(stepperE2, TMC_E2); + #endif + #if E_STEPPERS > 3 && M91x_USE(E3) + if (hasNone || eval == 3 || (hasE && eval == 10)) tmc_clear_otpw(stepperE3, TMC_E3); + #endif + #if E_STEPPERS > 4 && M91x_USE(E4) + if (hasNone || eval == 4 || (hasE && eval == 10)) tmc_clear_otpw(stepperE4, TMC_E4); + #endif } /** @@ -130,9 +152,9 @@ void GcodeSuite::M912() { #if ENABLED(HYBRID_THRESHOLD) void GcodeSuite::M913() { #define TMC_SAY_PWMTHRS(P,Q) tmc_get_pwmthrs(stepper##Q, TMC_##Q, planner.axis_steps_per_mm[P##_AXIS]) - #define TMC_SET_PWMTHRS(P,Q) tmc_set_pwmthrs(stepper##Q, TMC_##Q, value, planner.axis_steps_per_mm[P##_AXIS]) + #define TMC_SET_PWMTHRS(P,Q) tmc_set_pwmthrs(stepper##Q, value, planner.axis_steps_per_mm[P##_AXIS]) #define TMC_SAY_PWMTHRS_E(E) do{ const uint8_t extruder = E; tmc_get_pwmthrs(stepperE##E, TMC_E##E, planner.axis_steps_per_mm[E_AXIS_N]); }while(0) - #define TMC_SET_PWMTHRS_E(E) do{ const uint8_t extruder = E; tmc_set_pwmthrs(stepperE##E, TMC_E##E, value, planner.axis_steps_per_mm[E_AXIS_N]); }while(0) + #define TMC_SET_PWMTHRS_E(E) do{ const uint8_t extruder = E; tmc_set_pwmthrs(stepperE##E, value, planner.axis_steps_per_mm[E_AXIS_N]); }while(0) bool report = true; const uint8_t index = parser.byteval('I'); @@ -238,7 +260,7 @@ void GcodeSuite::M912() { #if ENABLED(SENSORLESS_HOMING) void GcodeSuite::M914() { #define TMC_SAY_SGT(Q) tmc_get_sgt(stepper##Q, TMC_##Q) - #define TMC_SET_SGT(Q) tmc_set_sgt(stepper##Q, TMC_##Q, value) + #define TMC_SET_SGT(Q) tmc_set_sgt(stepper##Q, value) bool report = true; const uint8_t index = parser.byteval('I'); diff --git a/Marlin/src/module/configuration_store.cpp b/Marlin/src/module/configuration_store.cpp index 873ac49d0c..2cb4c5fdc3 100644 --- a/Marlin/src/module/configuration_store.cpp +++ b/Marlin/src/module/configuration_store.cpp @@ -1326,7 +1326,7 @@ void MarlinSettings::postprocess() { #endif #if ENABLED(HYBRID_THRESHOLD) - #define TMC_SET_PWMTHRS(P,Q) tmc_set_pwmthrs(stepper##Q, TMC_##Q, tmc_hybrid_threshold[TMC_##Q], planner.axis_steps_per_mm[P##_AXIS]) + #define TMC_SET_PWMTHRS(P,Q) tmc_set_pwmthrs(stepper##Q, tmc_hybrid_threshold[TMC_##Q], planner.axis_steps_per_mm[P##_AXIS]) uint32_t tmc_hybrid_threshold[TMC_AXES]; EEPROM_READ(tmc_hybrid_threshold); if (!validating) { diff --git a/Marlin/src/module/stepper_indirection.cpp b/Marlin/src/module/stepper_indirection.cpp index 7052c3a45a..be62f9d308 100644 --- a/Marlin/src/module/stepper_indirection.cpp +++ b/Marlin/src/module/stepper_indirection.cpp @@ -184,6 +184,10 @@ // Following values from Trinamic's spreadsheet with values for a NEMA17 (42BYGHW609) // https://www.trinamic.com/products/integrated-circuits/details/tmc2130/ void tmc2130_init(TMC2130Stepper &st, const uint16_t mA, const uint16_t microsteps, const uint32_t thrs, const float spmm) { + #if DISABLED(STEALTHCHOP) || DISABLED(HYBRID_THRESHOLD) + UNUSED(thrs); + UNUSED(spmm); + #endif st.begin(); st.setCurrent(mA, R_SENSE, HOLD_MULTIPLIER); st.microsteps(microsteps); @@ -201,9 +205,6 @@ st.stealthChop(1); #if ENABLED(HYBRID_THRESHOLD) st.stealth_max_speed(12650000UL*microsteps/(256*thrs*spmm)); - #else - UNUSED(thrs); - UNUSED(spmm); #endif #elif ENABLED(SENSORLESS_HOMING) st.coolstep_min_speed(1024UL * 1024UL - 1UL);