Update Formbot T-Rex 3 pins (#12662)

This commit is contained in:
InsanityAutomation 2018-12-20 18:32:39 -05:00 committed by Scott Lahteine
parent f7127c44f8
commit b7a8dcc35d

View File

@ -109,7 +109,7 @@
// //
#define TEMP_0_PIN 13 // Analog Input #define TEMP_0_PIN 13 // Analog Input
#define TEMP_1_PIN 15 // Analog Input #define TEMP_1_PIN 15 // Analog Input
#define TEMP_BED_PIN 3 // Analog Input #define TEMP_BED_PIN 14 // Analog Input
// SPI for Max6675 or Max31855 Thermocouple // SPI for Max6675 or Max31855 Thermocouple
#if DISABLED(SDSUPPORT) #if DISABLED(SDSUPPORT)
@ -118,22 +118,7 @@
#define MAX6675_SS_PIN 66 // Do not use pin 49 as this is tied to the switch inside the SD card socket to detect if there is an SD card present #define MAX6675_SS_PIN 66 // Do not use pin 49 as this is tied to the switch inside the SD card socket to detect if there is an SD card present
#endif #endif
//
// Augmentation for auto-assigning RAMPS plugs
//
#if DISABLED(IS_RAMPS_EEB) && DISABLED(IS_RAMPS_EEF) && DISABLED(IS_RAMPS_EFB) && DISABLED(IS_RAMPS_EFF) && DISABLED(IS_RAMPS_SF) && !PIN_EXISTS(MOSFET_D)
#if HOTENDS > 1
#if TEMP_SENSOR_BED
#define IS_RAMPS_EEB
#else
#define IS_RAMPS_EEF
#endif
#elif TEMP_SENSOR_BED
#define IS_RAMPS_EFB
#else
#define IS_RAMPS_EFF
#endif
#endif
// //
// Heaters / Fans // Heaters / Fans
@ -143,8 +128,9 @@
#define HEATER_BED_PIN 8 #define HEATER_BED_PIN 8
#define FAN_PIN 9 #define FAN_PIN 9
//#define FAN1_PIN 4 #define FAN1_PIN 12
#define NUM_RUNOUT_SENSORS 2
#define FIL_RUNOUT_PIN 23 #define FIL_RUNOUT_PIN 23
#define FIL_RUNOUT2_PIN 21 #define FIL_RUNOUT2_PIN 21
@ -157,6 +143,9 @@
#define LED_PIN 13 #define LED_PIN 13
#endif #endif
#define SPINDLE_LASER_PWM_PIN 7 // MUST BE HARDWARE PWM
#define SPINDLE_LASER_ENABLE_PIN 4 // Pin should have a pullup!
// Use the RAMPS 1.4 Analog input 5 on the AUX2 connector // Use the RAMPS 1.4 Analog input 5 on the AUX2 connector
#define FILWIDTH_PIN 5 // Analog Input #define FILWIDTH_PIN 5 // Analog Input