From 86bf911139b0b3280809f3070bac7157803663ae Mon Sep 17 00:00:00 2001 From: Nicolas Rossi Date: Tue, 5 Mar 2013 14:52:51 +0100 Subject: [PATCH 01/11] Toggle menu for PSU from LCD pannel From the prepare menu, accessible when is not printing, you have the possibility to turn off the PSU when is on et vice versa. From the host, you can turn off or turn on the PSU then the menu is updated accordingly. From the LCD message, the printer status is reported ready or off respectively when the PSU is on or off. --- Marlin/Marlin_main.cpp | 34 ++++++++++++++++++++++++---------- Marlin/language.h | 18 ++++++++++++++++++ Marlin/ultralcd.cpp | 7 +++++++ 3 files changed, 49 insertions(+), 10 deletions(-) diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp index 39efdf4545..7c715d8373 100644 --- a/Marlin/Marlin_main.cpp +++ b/Marlin/Marlin_main.cpp @@ -124,7 +124,7 @@ // M500 - stores paramters in EEPROM // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. -// M503 - print the current settings (from memory not from eeprom) +// M503 - print the current settings (from memory not from eeprom) // M540 - Use S[0|1] to enable or disable the stop SD card print on endstop hit (requires ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED) // M600 - Pause for filament change X[pos] Y[pos] Z[relative lift] E[initial retract] L[later retract distance for removal] // M907 - Set digital trimpot motor current using axis codes. @@ -165,6 +165,10 @@ int fanSpeed=0; float retract_recover_length=0, retract_recover_feedrate=8*60; #endif +#ifdef ULTIPANEL + bool powersupply = true; +#endif + //=========================================================================== //=============================private variables============================= //=========================================================================== @@ -1140,13 +1144,18 @@ void process_commands() #endif //FAN_PIN #if (PS_ON_PIN > -1) - case 80: // M80 - ATX Power On + case 80: // M80 - Turn on Power Supply SET_OUTPUT(PS_ON_PIN); //GND WRITE(PS_ON_PIN, PS_ON_AWAKE); + #ifdef ULTIPANEL + powersupply = true; + LCD_MESSAGEPGM(WELCOME_MSG); + lcd_update(); + #endif break; #endif - case 81: // M81 - ATX Power Off + case 81: // M81 - Turn off Power Supply #if defined SUICIDE_PIN && SUICIDE_PIN > -1 st_synchronize(); @@ -1154,6 +1163,11 @@ void process_commands() #elif (PS_ON_PIN > -1) SET_OUTPUT(PS_ON_PIN); WRITE(PS_ON_PIN, PS_ON_ASLEEP); + #endif + #ifdef ULTIPANEL + powersupply = false; + LCD_MESSAGEPGM(MACHINE_NAME" "MSG_OFF"."); + lcd_update(); #endif break; @@ -1499,13 +1513,13 @@ void process_commands() { Config_PrintSettings(); } - break; - #ifdef ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED - case 540: - { - if(code_seen('S')) abort_on_endstop_hit = code_value() > 0; - } - break; + break; + #ifdef ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED + case 540: + { + if(code_seen('S')) abort_on_endstop_hit = code_value() > 0; + } + break; #endif #ifdef FILAMENTCHANGEENABLE case 600: //Pause for filament change X[pos] Y[pos] Z[relative lift] E[initial retract] L[later retract distance for removal] diff --git a/Marlin/language.h b/Marlin/language.h index 5d4404d663..564d7b9a6a 100644 --- a/Marlin/language.h +++ b/Marlin/language.h @@ -50,6 +50,8 @@ #define MSG_PREHEAT_ABS "Preheat ABS" #define MSG_PREHEAT_ABS_SETTINGS "Preheat ABS Conf" #define MSG_COOLDOWN "Cooldown" + #define MSG_SWITCH_PS_ON "Switch Power On" + #define MSG_SWITCH_PS_OFF "Switch Power Off" #define MSG_EXTRUDE "Extrude" #define MSG_RETRACT "Retract" #define MSG_MOVE_AXIS "Move Axis" @@ -205,6 +207,8 @@ #define MSG_PREHEAT_ABS "Rozgrzej ABS" #define MSG_PREHEAT_ABS_SETTINGS "Ustawienia roz. ABS" #define MSG_COOLDOWN "Chlodzenie" + #define MSG_SWITCH_PS_ON "Switch Power On" + #define MSG_SWITCH_PS_OFF "Switch Power Off" #define MSG_EXTRUDE "Ekstruzja" #define MSG_RETRACT "Cofanie" #define MSG_MOVE_AXIS "Ruch osi" @@ -360,6 +364,8 @@ #define MSG_PREHEAT_ABS " Prechauffage ABS" #define MSG_PREHEAT_ABS_SETTINGS " Regl. prechauffe ABS" #define MSG_COOLDOWN " Refroidissement" +#define MSG_SWITCH_PS_ON "Allumer alimentation" +#define MSG_SWITCH_PS_OFF "Eteindre alimentation" #define MSG_EXTRUDE " Extrusion" #define MSG_RETRACT " Retractation" #define MSG_PREHEAT_PLA " Prechauffage PLA" @@ -523,6 +529,8 @@ #define MSG_PREHEAT_ABS "Vorwärmen ABS" #define MSG_PREHEAT_ABS_SETTINGS "Vorwärmen ABS Einstellungen" #define MSG_COOLDOWN "Abkühlen" + #define MSG_SWITCH_PS_ON "Switch Power On" + #define MSG_SWITCH_PS_OFF "Switch Power Off" #define MSG_EXTRUDE "Extrude" #define MSG_RETRACT "Retract" #define MSG_MOVE_AXIS "Achsen bewegen" @@ -675,6 +683,8 @@ #define MSG_AUTO_HOME " Llevar Ejes al Cero" #define MSG_SET_ORIGIN " Establecer Cero" #define MSG_COOLDOWN " Enfriar" +#define MSG_SWITCH_PS_ON "Switch Power On" +#define MSG_SWITCH_PS_OFF "Switch Power Off" #define MSG_EXTRUDE " Extruir" #define MSG_RETRACT " Retraer" #define MSG_PREHEAT_PLA " Precalentar PLA" @@ -835,6 +845,8 @@ #define MSG_PREHEAT_ABS " Преднагрев ABS " #define MSG_PREHEAT_ABS_SETTINGS " Настр. преднагр.ABS" #define MSG_COOLDOWN " Охлаждение " +#define MSG_SWITCH_PS_ON "Switch Power On" +#define MSG_SWITCH_PS_OFF "Switch Power Off" #define MSG_EXTRUDE " Экструзия " #define MSG_RETRACT " Откат" #define MSG_MOVE_AXIS " Движение по осям \x7E" @@ -986,6 +998,8 @@ #define MSG_PREHEAT_ABS "Preriscalda ABS" #define MSG_PREHEAT_ABS_SETTINGS "Preris. ABS Conf" #define MSG_COOLDOWN "Rafredda" + #define MSG_SWITCH_PS_ON "Switch Power On" + #define MSG_SWITCH_PS_OFF "Switch Power Off" #define MSG_EXTRUDE "Estrudi" #define MSG_RETRACT "Ritrai" #define MSG_MOVE_AXIS "Muovi Asse" @@ -1142,6 +1156,8 @@ #define MSG_PREHEAT_ABS " pre-aquecer ABS" #define MSG_PREHEAT_ABS_SETTINGS " pre-aquecer ABS Setting" #define MSG_COOLDOWN " Esfriar" + #define MSG_SWITCH_PS_ON "Switch Power On" + #define MSG_SWITCH_PS_OFF "Switch Power Off" #define MSG_EXTRUDE " Extrudar" #define MSG_RETRACT " Retrair" #define MSG_PREHEAT_PLA " pre-aquecer PLA" @@ -1308,6 +1324,8 @@ #define MSG_PREHEAT_ABS "Esilammita ABS" #define MSG_PREHEAT_ABS_SETTINGS "Esilammita ABS konf" #define MSG_COOLDOWN "Jaahdyta" + #define MSG_SWITCH_PS_ON "Switch Power On" + #define MSG_SWITCH_PS_OFF "Switch Power Off" #define MSG_EXTRUDE "Pursota" #define MSG_RETRACT "Veda takaisin" #define MSG_MOVE_AXIS "Liikuta akseleita" diff --git a/Marlin/ultralcd.cpp b/Marlin/ultralcd.cpp index db2d2766ca..e989bbfe44 100644 --- a/Marlin/ultralcd.cpp +++ b/Marlin/ultralcd.cpp @@ -30,6 +30,7 @@ char lcd_status_message[LCD_WIDTH+1] = WELCOME_MSG; /* Different menus */ static void lcd_status_screen(); #ifdef ULTIPANEL +extern bool powersupply; static void lcd_main_menu(); static void lcd_tune_menu(); static void lcd_prepare_menu(); @@ -278,6 +279,12 @@ static void lcd_prepare_menu() MENU_ITEM(function, MSG_PREHEAT_PLA, lcd_preheat_pla); MENU_ITEM(function, MSG_PREHEAT_ABS, lcd_preheat_abs); MENU_ITEM(gcode, MSG_COOLDOWN, PSTR("M104 S0\nM140 S0")); + if (powersupply) + { + MENU_ITEM(gcode, MSG_SWITCH_PS_OFF, PSTR("M81")); + }else{ + MENU_ITEM(gcode, MSG_SWITCH_PS_ON, PSTR("M80")); + } MENU_ITEM(submenu, MSG_MOVE_AXIS, lcd_move_menu); END_MENU(); } From 6504e96165b528b15cf28a09b958290c4dd22939 Mon Sep 17 00:00:00 2001 From: Nicolas Rossi Date: Tue, 5 Mar 2013 15:03:48 +0100 Subject: [PATCH 02/11] Turn off power supply off-load Disable the high current output and wait a little before to turn off, because the interrupting capacity of the PSU is unknown. Could be a function if needed by other. --- Marlin/Marlin_main.cpp | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp index 7c715d8373..94205f0045 100644 --- a/Marlin/Marlin_main.cpp +++ b/Marlin/Marlin_main.cpp @@ -1156,7 +1156,14 @@ void process_commands() #endif case 81: // M81 - Turn off Power Supply - + disable_heater(); + st_synchronize(); + disable_e0(); + disable_e1(); + disable_e2(); + finishAndDisableSteppers(); + fanSpeed = 0; + delay(1000); // Wait a little before to switch off #if defined SUICIDE_PIN && SUICIDE_PIN > -1 st_synchronize(); suicide(); From aba67e244922d8c71e26a215c06752c36743ae37 Mon Sep 17 00:00:00 2001 From: Nicolas Rossi Date: Tue, 5 Mar 2013 15:51:24 +0100 Subject: [PATCH 03/11] No bed config for RAMPS The motherboard 35 is a config without bed with this pins setting : D8 Extruder D9 Fan D10 Controller Fan --- Marlin/Configuration.h | 7 ++++--- Marlin/pins.h | 21 ++++++++++++++++----- 2 files changed, 20 insertions(+), 8 deletions(-) diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index 9d1027a0fe..819ae30b98 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -28,6 +28,7 @@ // 3 = MEGA/RAMPS up to 1.2 = 3 // 33 = RAMPS 1.3 (Power outputs: Extruder, Bed, Fan) // 34 = RAMPS 1.3 (Power outputs: Extruder0, Extruder1, Bed) +// 35 = RAMPS 1.3 (Power outputs: Extruder, Fan, Fan) // 4 = Duemilanove w/ ATMega328P pin assignment // 5 = Gen6 // 51 = Gen6 deluxe @@ -316,9 +317,9 @@ const bool Z_ENDSTOPS_INVERTING = true; // set to true to invert the logic of th // The RepRapDiscount Smart Controller (white PCB) // http://reprap.org/wiki/RepRapDiscount_Smart_Controller //#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// The GADGETS3D G3D LCD/SD Controller (blue PCB) -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel + +// The GADGETS3D G3D LCD/SD Controller (blue PCB) +// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel //#define G3D_PANEL //automatic expansion diff --git a/Marlin/pins.h b/Marlin/pins.h index 41aae2e221..0c48e12d88 100644 --- a/Marlin/pins.h +++ b/Marlin/pins.h @@ -305,7 +305,7 @@ * Arduino Mega pin assignment * ****************************************************************************************/ -#if MOTHERBOARD == 3 || MOTHERBOARD == 33 || MOTHERBOARD == 34 +#if MOTHERBOARD == 3 || MOTHERBOARD == 33 || MOTHERBOARD == 34 || MOTHERBOARD == 35 #define KNOWN_BOARD 1 //////////////////FIX THIS////////////// @@ -319,7 +319,7 @@ // #define RAMPS_V_1_3 // #define RAMPS_V_1_0 -#if MOTHERBOARD == 33 || MOTHERBOARD == 34 +#if MOTHERBOARD == 33 || MOTHERBOARD == 34 || MOTHERBOARD == 35 #define X_STEP_PIN 54 #define X_DIR_PIN 55 @@ -355,11 +355,14 @@ #define SDSS 53 #define LED_PIN 13 -#if MOTHERBOARD == 33 +#if MOTHERBOARD == 33 || MOTHERBOARD == 35 #define FAN_PIN 9 // (Sprinter config) #else #define FAN_PIN 4 // IO pin. Buffer needed #endif +#if MOTHERBOARD == 35 +#define CONTROLLERFAN_PIN 10 //Pin used for the fan to cool controller +#endif #define PS_ON_PIN 12 #if defined(REPRAP_DISCOUNT_SMART_CONTROLLER) || defined(G3D_PANEL) @@ -368,7 +371,11 @@ #define KILL_PIN -1 #endif +#if MOTHERBOARD == 35 +#define HEATER_0_PIN 8 +#else #define HEATER_0_PIN 10 // EXTRUDER 1 +#endif #if MOTHERBOARD == 33 #define HEATER_1_PIN -1 #else @@ -378,7 +385,11 @@ #define TEMP_0_PIN 13 // ANALOG NUMBERING #define TEMP_1_PIN 15 // ANALOG NUMBERING #define TEMP_2_PIN -1 // ANALOG NUMBERING +#if MOTHERBOARD == 35 +#define HEATER_BED_PIN -1 +#else #define HEATER_BED_PIN 8 // BED +#endif #define TEMP_BED_PIN 14 // ANALOG NUMBERING #ifdef ULTRA_LCD @@ -509,7 +520,7 @@ #define TEMP_1_PIN -1 #define TEMP_2_PIN -1 #define TEMP_BED_PIN 1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! -#endif// MOTHERBOARD == 33 || MOTHERBOARD == 34 +#endif// MOTHERBOARD == 33 || MOTHERBOARD == 34 || MOTHERBOARD == 35 // SPI for Max6675 Thermocouple @@ -523,7 +534,7 @@ #define MAX6675_SS 49 #endif -#endif//MOTHERBOARD == 3 || MOTHERBOARD == 33 || MOTHERBOARD == 34 +#endif//MOTHERBOARD == 3 || MOTHERBOARD == 33 || MOTHERBOARD == 34 || MOTHERBOARD == 35 /**************************************************************************************** * Duemilanove w/ ATMega328P pin assignment From d7390e13d90f61d9efa4c6bb774d902ebf35d5fa Mon Sep 17 00:00:00 2001 From: Robert F-C Date: Wed, 17 Jul 2013 22:44:45 +1000 Subject: [PATCH 04/11] Support dual x-carriage printers Dual x-carriage designs offer some substantial improvements for dual extruder printing. --- Marlin/Configuration_adv.h | 30 ++++++++ Marlin/Marlin.h | 6 +- Marlin/Marlin_main.cpp | 141 ++++++++++++++++++++++++++++++++++++- Marlin/stepper.cpp | 88 +++++++++++++++++------ README.md | 2 + 5 files changed, 242 insertions(+), 25 deletions(-) diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index 909949eb91..9aee4a8921 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -146,6 +146,36 @@ #define EXTRUDERS 1 #endif +// Enable this for dual x-carriage printers. +// A dual x-carriage design has the advantage that the inactive extruder can be parked which +// prevents hot-end ooze contaminating the print. It also reduces the weight of each x-carriage +// allowing faster printing speeds. +#define DUAL_X_CARRIAGE +#ifdef DUAL_X_CARRIAGE +// Configuration for second X-carriage +// Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop; +// the second x-carriage always homes to the maximum endstop. +#define X2_MIN_POS 88 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage +#define X2_MAX_POS 350.45 // set maximum to the distance between toolheads when both heads are homed +#define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position +#define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position + // However: In this mode the EXTRUDER_OFFSET_X value for the second extruder provides a software + // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops + // without modifying the firmware (through the "M218 T1 X???" command). + // Remember: you should set the second extruder x-offset to 0 in your slicer. + +// Pins for second x-carriage stepper driver (defined here to avoid further complicating pins.h) +#define X2_ENABLE_PIN 29 +#define X2_STEP_PIN 25 +#define X2_DIR_PIN 23 + +// The following settings control the behaviour of the automatic parking and unparking of inactive extruder +#define TOOLCHANGE_PARK_ZLIFT 0.1 // the distance to raise Z axis when parking an extruder +#define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder +#define TOOLCHANGE_UNPARK_SKIP_TRAVEL_MOVES // disable if slicer natively suports dual x-carriage mode. + // When enabled this avoids unnecessary & inadvertant moves from the last position of old extruder. +#endif // DUAL_X_CARRIAGE + //homing hits the endstop, then retracts by this distance, before it tries to slowly bump again: #define X_HOME_RETRACT_MM 5 #define Y_HOME_RETRACT_MM 5 diff --git a/Marlin/Marlin.h b/Marlin/Marlin.h index c9759eb219..1ae9494e34 100644 --- a/Marlin/Marlin.h +++ b/Marlin/Marlin.h @@ -96,7 +96,11 @@ void process_commands(); void manage_inactivity(); -#if defined(X_ENABLE_PIN) && X_ENABLE_PIN > -1 +#if defined(DUAL_X_CARRIAGE) && defined(X_ENABLE_PIN) && X_ENABLE_PIN > -1 \ + && defined(X2_ENABLE_PIN) && X2_ENABLE_PIN > -1 + #define enable_x() do { WRITE(X_ENABLE_PIN, X_ENABLE_ON); WRITE(X2_ENABLE_PIN, X_ENABLE_ON); } while (0) + #define disable_x() do { WRITE(X_ENABLE_PIN,!X_ENABLE_ON); WRITE(X2_ENABLE_PIN,!X_ENABLE_ON); } while (0) +#elif defined(X_ENABLE_PIN) && X_ENABLE_PIN > -1 #define enable_x() WRITE(X_ENABLE_PIN, X_ENABLE_ON) #define disable_x() WRITE(X_ENABLE_PIN,!X_ENABLE_ON) #else diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp index 38da1db08e..c44cf5eca9 100644 --- a/Marlin/Marlin_main.cpp +++ b/Marlin/Marlin_main.cpp @@ -677,7 +677,46 @@ XYZ_CONSTS_FROM_CONFIG(float, max_length, MAX_LENGTH); XYZ_CONSTS_FROM_CONFIG(float, home_retract_mm, HOME_RETRACT_MM); XYZ_CONSTS_FROM_CONFIG(signed char, home_dir, HOME_DIR); +#ifdef DUAL_X_CARRIAGE + #if EXTRUDERS == 1 || defined(COREXY) \ + || !defined(X2_ENABLE_PIN) || !defined(X2_STEP_PIN) || !defined(X2_DIR_PIN) \ + || !defined(X2_HOME_POS) || !defined(X2_MIN_POS) || !defined(X2_MAX_POS) \ + || !defined(X_MAX_PIN) || X_MAX_PIN < 0 + #error "Missing or invalid definitions for DUAL_X_CARRIAGE mode." + #endif + #if X_HOME_DIR != -1 || X2_HOME_DIR != 1 + #error "Please use canonical x-carriage assignment" // the x-carriages are defined by their homing directions + #endif + +static float x_home_pos(int extruder) { + if (extruder == 0) + return base_home_pos(X_AXIS) + add_homeing[X_AXIS]; + else + // In dual carriage mode the extruder offset provides an override of the + // second X-carriage offset when homed - otherwise X2_HOME_POS is used. + // This allow soft recalibration of the second extruder offset position without firmware reflash + // (through the M218 command). + return (extruder_offset[X_AXIS][1] != 0) ? extruder_offset[X_AXIS][1] : X2_HOME_POS; +} + +static int x_home_dir(int extruder) { + return (extruder == 0) ? X_HOME_DIR : X2_HOME_DIR; +} + +static bool active_extruder_parked = false; +static float raised_parked_position[NUM_AXIS]; +static unsigned long delayed_move_time = 0; +#endif + static void axis_is_at_home(int axis) { +#ifdef DUAL_X_CARRIAGE + if (axis == X_AXIS && active_extruder != 0) { + current_position[X_AXIS] = x_home_pos(active_extruder); + min_pos[X_AXIS] = X2_MIN_POS; + max_pos[X_AXIS] = X2_MAX_POS; + return; + } +#endif current_position[axis] = base_home_pos(axis) + add_homeing[axis]; min_pos[axis] = base_min_pos(axis) + add_homeing[axis]; max_pos[axis] = base_max_pos(axis) + add_homeing[axis]; @@ -686,10 +725,16 @@ static void axis_is_at_home(int axis) { static void homeaxis(int axis) { #define HOMEAXIS_DO(LETTER) \ ((LETTER##_MIN_PIN > -1 && LETTER##_HOME_DIR==-1) || (LETTER##_MAX_PIN > -1 && LETTER##_HOME_DIR==1)) + if (axis==X_AXIS ? HOMEAXIS_DO(X) : axis==Y_AXIS ? HOMEAXIS_DO(Y) : axis==Z_AXIS ? HOMEAXIS_DO(Z) : 0) { + int axis_home_dir = home_dir(axis); +#ifdef DUAL_X_CARRIAGE + if (axis == X_AXIS) + axis_home_dir = x_home_dir(active_extruder); +#endif // Engage Servo endstop if enabled #ifdef SERVO_ENDSTOPS @@ -864,8 +909,14 @@ void process_commands() { current_position[X_AXIS] = 0;current_position[Y_AXIS] = 0; + #ifdef DUAL_X_CARRIAGE + int x_axis_home_dir = home_dir(X_AXIS); + #else + int x_axis_home_dir = x_home_dir(active_extruder); + #endif + plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]); - destination[X_AXIS] = 1.5 * X_MAX_LENGTH * X_HOME_DIR;destination[Y_AXIS] = 1.5 * Y_MAX_LENGTH * Y_HOME_DIR; + destination[X_AXIS] = 1.5 * max_length(X_AXIS) * x_axis_home_dir;destination[Y_AXIS] = 1.5 * max_length(Y_AXIS) * home_dir(Y_AXIS); feedrate = homing_feedrate[X_AXIS]; if(homing_feedrate[Y_AXIS] raised_parked_position[Z_AXIS]) + raised_parked_position[Z_AXIS] = destination[Z_AXIS]; + delayed_move_time = millis(); + return; + } + delayed_move_time = 0; +#else + // this will cause the unpark code below to execute the specified lift in moving to the initial (travel move) position. + memcpy(current_position, destination, sizeof(current_position)); +#endif + } + // unpark extruder: 1) raise, 2) move into starting XY position, 3) lower + plan_buffer_line(raised_parked_position[X_AXIS], raised_parked_position[Y_AXIS], raised_parked_position[Z_AXIS], current_position[E_AXIS], max_feedrate[Z_AXIS], active_extruder); + plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], raised_parked_position[Z_AXIS], + current_position[E_AXIS], min(max_feedrate[X_AXIS],max_feedrate[Y_AXIS]), active_extruder); + plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], + current_position[E_AXIS], max_feedrate[Z_AXIS], active_extruder); + active_extruder_parked = false; + } +#endif //DUAL_X_CARRIAGE + // Do not use feedmultiply for E or Z only moves if( (current_position[X_AXIS] == destination [X_AXIS]) && (current_position[Y_AXIS] == destination [Y_AXIS])) { plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate/60, active_extruder); @@ -2254,6 +2378,9 @@ void controllerFan() || !READ(E2_ENABLE_PIN) #endif #if EXTRUDER > 1 + #if defined(X2_ENABLE_PIN) && X2_ENABLE_PIN > -1 + || !READ(X2_ENABLE_PIN) + #endif || !READ(E1_ENABLE_PIN) #endif || !READ(E0_ENABLE_PIN)) //If any of the drivers are enabled... @@ -2320,6 +2447,16 @@ void manage_inactivity() WRITE(E0_ENABLE_PIN,oldstatus); } #endif + #if defined(DUAL_X_CARRIAGE) && defined(TOOLCHANGE_UNPARK_SKIP_TRAVEL_MOVES) + // handle delayed move timeout + if (delayed_move_time != 0 && (millis() - delayed_move_time) > 1000) + { + // travel moves have been received so enact them + delayed_move_time = 0xFFFFFFFFUL; // force moves to be done + memcpy(destination,current_position,sizeof(destination)); + prepare_move(); + } + #endif check_axes_activity(); } diff --git a/Marlin/stepper.cpp b/Marlin/stepper.cpp index a7991501e9..2f1d912600 100644 --- a/Marlin/stepper.cpp +++ b/Marlin/stepper.cpp @@ -348,11 +348,21 @@ ISR(TIMER1_COMPA_vect) // Set the direction bits (X_AXIS=A_AXIS and Y_AXIS=B_AXIS for COREXY) if((out_bits & (1< -1 - bool x_min_endstop=(READ(X_MIN_PIN) != X_ENDSTOPS_INVERTING); - if(x_min_endstop && old_x_min_endstop && (current_block->steps_x > 0)) { - endstops_trigsteps[X_AXIS] = count_position[X_AXIS]; - endstop_x_hit=true; - step_events_completed = current_block->step_event_count; - } - old_x_min_endstop = x_min_endstop; - #endif + #ifdef DUAL_X_CARRIAGE + // with 2 x-carriages, endstops are only checked in the homing direction for the active extruder + if ((active_extruder == 0 && X_HOME_DIR == -1) || (active_extruder != 0 && X2_HOME_DIR == -1)) + #endif + { + #if defined(X_MIN_PIN) && X_MIN_PIN > -1 + bool x_min_endstop=(READ(X_MIN_PIN) != X_ENDSTOPS_INVERTING); + if(x_min_endstop && old_x_min_endstop && (current_block->steps_x > 0)) { + endstops_trigsteps[X_AXIS] = count_position[X_AXIS]; + endstop_x_hit=true; + step_events_completed = current_block->step_event_count; + } + old_x_min_endstop = x_min_endstop; + #endif + } } } else { // +direction CHECK_ENDSTOPS { - #if defined(X_MAX_PIN) && X_MAX_PIN > -1 - bool x_max_endstop=(READ(X_MAX_PIN) != X_ENDSTOPS_INVERTING); - if(x_max_endstop && old_x_max_endstop && (current_block->steps_x > 0)){ - endstops_trigsteps[X_AXIS] = count_position[X_AXIS]; - endstop_x_hit=true; - step_events_completed = current_block->step_event_count; - } - old_x_max_endstop = x_max_endstop; - #endif + #ifdef DUAL_X_CARRIAGE + // with 2 x-carriages, endstops are only checked in the homing direction for the active extruder + if ((active_extruder == 0 && X_HOME_DIR == 1) || (active_extruder != 0 && X2_HOME_DIR == 1)) + #endif + { + #if defined(X_MAX_PIN) && X_MAX_PIN > -1 + bool x_max_endstop=(READ(X_MAX_PIN) != X_ENDSTOPS_INVERTING); + if(x_max_endstop && old_x_max_endstop && (current_block->steps_x > 0)){ + endstops_trigsteps[X_AXIS] = count_position[X_AXIS]; + endstop_x_hit=true; + step_events_completed = current_block->step_event_count; + } + old_x_max_endstop = x_max_endstop; + #endif + } } } @@ -507,10 +529,20 @@ ISR(TIMER1_COMPA_vect) counter_x += current_block->steps_x; if (counter_x > 0) { - WRITE(X_STEP_PIN, !INVERT_X_STEP_PIN); + #ifdef DUAL_X_CARRIAGE + if (active_extruder != 0) + WRITE(X2_STEP_PIN,!INVERT_X_STEP_PIN); + else + #endif + WRITE(X_STEP_PIN, !INVERT_X_STEP_PIN); counter_x -= current_block->step_event_count; count_position[X_AXIS]+=count_direction[X_AXIS]; - WRITE(X_STEP_PIN, INVERT_X_STEP_PIN); + #ifdef DUAL_X_CARRIAGE + if (active_extruder != 0) + WRITE(X2_STEP_PIN,INVERT_X_STEP_PIN); + else + #endif + WRITE(X_STEP_PIN, INVERT_X_STEP_PIN); } counter_y += current_block->steps_y; @@ -685,6 +717,9 @@ void st_init() #if defined(X_DIR_PIN) && X_DIR_PIN > -1 SET_OUTPUT(X_DIR_PIN); #endif + #if defined(X2_DIR_PIN) && X2_DIR_PIN > -1 + SET_OUTPUT(X2_DIR_PIN); + #endif #if defined(Y_DIR_PIN) && Y_DIR_PIN > -1 SET_OUTPUT(Y_DIR_PIN); #endif @@ -711,6 +746,10 @@ void st_init() SET_OUTPUT(X_ENABLE_PIN); if(!X_ENABLE_ON) WRITE(X_ENABLE_PIN,HIGH); #endif + #if defined(X2_ENABLE_PIN) && X2_ENABLE_PIN > -1 + SET_OUTPUT(X2_ENABLE_PIN); + if(!X_ENABLE_ON) WRITE(X2_ENABLE_PIN,HIGH); + #endif #if defined(Y_ENABLE_PIN) && Y_ENABLE_PIN > -1 SET_OUTPUT(Y_ENABLE_PIN); if(!Y_ENABLE_ON) WRITE(Y_ENABLE_PIN,HIGH); @@ -788,6 +827,11 @@ void st_init() WRITE(X_STEP_PIN,INVERT_X_STEP_PIN); disable_x(); #endif + #if defined(X2_STEP_PIN) && (X2_STEP_PIN > -1) + SET_OUTPUT(X2_STEP_PIN); + WRITE(X2_STEP_PIN,INVERT_X_STEP_PIN); + disable_x(); + #endif #if defined(Y_STEP_PIN) && (Y_STEP_PIN > -1) SET_OUTPUT(Y_STEP_PIN); WRITE(Y_STEP_PIN,INVERT_Y_STEP_PIN); diff --git a/README.md b/README.md index f5792ea066..014871739a 100644 --- a/README.md +++ b/README.md @@ -41,6 +41,8 @@ Features: * Heater power reporting. Useful for PID monitoring. * PID tuning * CoreXY kinematics (www.corexy.com/theory.html) +* Delta kinematics +* Dual X-carriage support for multiple extruder systems * Configurable serial port to support connection of wireless adaptors. * Automatic operation of extruder/cold-end cooling fans based on nozzle temperature * RC Servo Support, specify angle or duration for continuous rotation servos. From 39cd3dbdbe28151566e0a8c76073185217c8a900 Mon Sep 17 00:00:00 2001 From: Robert F-C Date: Sat, 20 Jul 2013 13:07:50 +1000 Subject: [PATCH 05/11] Remove dual x-carriage functionality that could/should be implemented in slicer Also added a couple of missed merge lines in homeaxis() from previous commit. --- Marlin/Configuration_adv.h | 5 --- Marlin/Marlin_main.cpp | 89 ++++++-------------------------------- 2 files changed, 13 insertions(+), 81 deletions(-) diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index 9aee4a8921..52b654d05c 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -169,11 +169,6 @@ #define X2_STEP_PIN 25 #define X2_DIR_PIN 23 -// The following settings control the behaviour of the automatic parking and unparking of inactive extruder -#define TOOLCHANGE_PARK_ZLIFT 0.1 // the distance to raise Z axis when parking an extruder -#define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder -#define TOOLCHANGE_UNPARK_SKIP_TRAVEL_MOVES // disable if slicer natively suports dual x-carriage mode. - // When enabled this avoids unnecessary & inadvertant moves from the last position of old extruder. #endif // DUAL_X_CARRIAGE //homing hits the endstop, then retracts by this distance, before it tries to slowly bump again: diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp index c44cf5eca9..45720f79b6 100644 --- a/Marlin/Marlin_main.cpp +++ b/Marlin/Marlin_main.cpp @@ -703,9 +703,7 @@ static int x_home_dir(int extruder) { return (extruder == 0) ? X_HOME_DIR : X2_HOME_DIR; } -static bool active_extruder_parked = false; -static float raised_parked_position[NUM_AXIS]; -static unsigned long delayed_move_time = 0; +static float inactive_x_carriage_pos = X2_MAX_POS; #endif static void axis_is_at_home(int axis) { @@ -745,18 +743,18 @@ static void homeaxis(int axis) { current_position[axis] = 0; plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]); - destination[axis] = 1.5 * max_length(axis) * home_dir(axis); + destination[axis] = 1.5 * max_length(axis) * axis_home_dir; feedrate = homing_feedrate[axis]; plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate/60, active_extruder); st_synchronize(); current_position[axis] = 0; plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]); - destination[axis] = -home_retract_mm(axis) * home_dir(axis); + destination[axis] = -home_retract_mm(axis) * axis_home_dir; plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate/60, active_extruder); st_synchronize(); - destination[axis] = 2*home_retract_mm(axis) * home_dir(axis); + destination[axis] = 2*home_retract_mm(axis) * axis_home_dir; feedrate = homing_feedrate[axis]/2 ; plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate/60, active_extruder); st_synchronize(); @@ -896,7 +894,7 @@ void process_commands() #else // NOT DELTA - home_all_axis = !((code_seen(axis_codes[0])) || (code_seen(axis_codes[1])) || (code_seen(axis_codes[2]))); + home_all_axis = !((code_seen(axis_codes[0])) || (code_seen(axis_codes[1])) || (code_seen(axis_codes[2]))); #if Z_HOME_DIR > 0 // If homing away from BED do Z first if((home_all_axis) || (code_seen(axis_codes[Z_AXIS]))) { @@ -945,9 +943,8 @@ void process_commands() int tmp_extruder = active_extruder; active_extruder = !active_extruder; HOMEAXIS(X); + inactive_x_carriage_pos = current_position[X_AXIS]; active_extruder = tmp_extruder; - active_extruder_parked = false; - delayed_move_time = 0; #endif HOMEAXIS(X); } @@ -2061,34 +2058,18 @@ void process_commands() // Save current position to return to after applying extruder offset memcpy(destination, current_position, sizeof(destination)); #ifdef DUAL_X_CARRIAGE - if (Stopped == false && delayed_move_time == 0 && current_position[X_AXIS] != x_home_pos(active_extruder)) - { - // Park old head: 1) raise 2) move to park position 3) lower - plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS] + TOOLCHANGE_PARK_ZLIFT, - current_position[E_AXIS], max_feedrate[Z_AXIS], active_extruder); - plan_buffer_line(x_home_pos(active_extruder), current_position[Y_AXIS], current_position[Z_AXIS] + TOOLCHANGE_PARK_ZLIFT, - current_position[E_AXIS], max_feedrate[X_AXIS], active_extruder); - plan_buffer_line(x_home_pos(active_extruder), current_position[Y_AXIS], current_position[Z_AXIS], - current_position[E_AXIS], max_feedrate[Z_AXIS], active_extruder); - st_synchronize(); - } - // only apply Y extruder offset in dual x carriage mode (x offset is already used in determining home pos) current_position[Y_AXIS] = current_position[Y_AXIS] - extruder_offset[Y_AXIS][active_extruder] + extruder_offset[Y_AXIS][tmp_extruder]; - + + float tmp_x_pos = current_position[X_AXIS]; + + // Set the new active extruder and position active_extruder = tmp_extruder; - - // Inactive head always starts at its parked position. - axis_is_at_home(X_AXIS); - - // record raised toolhead position for use by unpark - memcpy(raised_parked_position, current_position, sizeof(raised_parked_position)); - raised_parked_position[Z_AXIS] += TOOLCHANGE_UNPARK_ZLIFT; - - active_extruder_parked = true; - delayed_move_time = 0; + axis_is_at_home(X_AXIS); //this function updates X min/max values. + current_position[X_AXIS] = inactive_x_carriage_pos; + inactive_x_carriage_pos = tmp_x_pos; #else // Offset extruder (only by XY) int i; @@ -2294,40 +2275,6 @@ void prepare_move() active_extruder); } #else - -#if defined(DUAL_X_CARRIAGE) - if (active_extruder_parked) - { - if (current_position[E_AXIS] == destination[E_AXIS]) - { - // this is a travel move -#ifdef TOOLCHANGE_UNPARK_SKIP_TRAVEL_MOVES - if (delayed_move_time != 0xFFFFFFFFUL) - { - // skip this move but still update current_position in main so that it can - // be used as starting position before extrusion (but not in planner) - memcpy(current_position, destination, sizeof(current_position)); - if (destination[Z_AXIS] > raised_parked_position[Z_AXIS]) - raised_parked_position[Z_AXIS] = destination[Z_AXIS]; - delayed_move_time = millis(); - return; - } - delayed_move_time = 0; -#else - // this will cause the unpark code below to execute the specified lift in moving to the initial (travel move) position. - memcpy(current_position, destination, sizeof(current_position)); -#endif - } - // unpark extruder: 1) raise, 2) move into starting XY position, 3) lower - plan_buffer_line(raised_parked_position[X_AXIS], raised_parked_position[Y_AXIS], raised_parked_position[Z_AXIS], current_position[E_AXIS], max_feedrate[Z_AXIS], active_extruder); - plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], raised_parked_position[Z_AXIS], - current_position[E_AXIS], min(max_feedrate[X_AXIS],max_feedrate[Y_AXIS]), active_extruder); - plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], - current_position[E_AXIS], max_feedrate[Z_AXIS], active_extruder); - active_extruder_parked = false; - } -#endif //DUAL_X_CARRIAGE - // Do not use feedmultiply for E or Z only moves if( (current_position[X_AXIS] == destination [X_AXIS]) && (current_position[Y_AXIS] == destination [Y_AXIS])) { plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate/60, active_extruder); @@ -2447,16 +2394,6 @@ void manage_inactivity() WRITE(E0_ENABLE_PIN,oldstatus); } #endif - #if defined(DUAL_X_CARRIAGE) && defined(TOOLCHANGE_UNPARK_SKIP_TRAVEL_MOVES) - // handle delayed move timeout - if (delayed_move_time != 0 && (millis() - delayed_move_time) > 1000) - { - // travel moves have been received so enact them - delayed_move_time = 0xFFFFFFFFUL; // force moves to be done - memcpy(destination,current_position,sizeof(destination)); - prepare_move(); - } - #endif check_axes_activity(); } From c3568398b5d48df7794162e9dc4862cc0a4f36e5 Mon Sep 17 00:00:00 2001 From: Robert F-C Date: Sat, 20 Jul 2013 23:50:30 +1000 Subject: [PATCH 06/11] Disable DUAL_X_CARRIAGE by default --- Marlin/Configuration_adv.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index 52b654d05c..f555d60692 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -150,7 +150,7 @@ // A dual x-carriage design has the advantage that the inactive extruder can be parked which // prevents hot-end ooze contaminating the print. It also reduces the weight of each x-carriage // allowing faster printing speeds. -#define DUAL_X_CARRIAGE +//#define DUAL_X_CARRIAGE #ifdef DUAL_X_CARRIAGE // Configuration for second X-carriage // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop; From fb5334f42823053e63ae5126e043daa965b37aa4 Mon Sep 17 00:00:00 2001 From: Robert F-C Date: Mon, 22 Jul 2013 22:46:14 +1000 Subject: [PATCH 07/11] Fixed compile error when QUICK_HOME is defined. As well a couple of minor changes to handling of extruder offset for dual x-carriage mode. --- Marlin/Marlin_main.cpp | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp index 45720f79b6..306e4d4711 100644 --- a/Marlin/Marlin_main.cpp +++ b/Marlin/Marlin_main.cpp @@ -696,7 +696,7 @@ static float x_home_pos(int extruder) { // second X-carriage offset when homed - otherwise X2_HOME_POS is used. // This allow soft recalibration of the second extruder offset position without firmware reflash // (through the M218 command). - return (extruder_offset[X_AXIS][1] != 0) ? extruder_offset[X_AXIS][1] : X2_HOME_POS; + return (extruder_offset[X_AXIS][1] > 0) ? extruder_offset[X_AXIS][1] : X2_HOME_POS; } static int x_home_dir(int extruder) { @@ -711,7 +711,7 @@ static void axis_is_at_home(int axis) { if (axis == X_AXIS && active_extruder != 0) { current_position[X_AXIS] = x_home_pos(active_extruder); min_pos[X_AXIS] = X2_MIN_POS; - max_pos[X_AXIS] = X2_MAX_POS; + max_pos[X_AXIS] = max(extruder_offset[X_AXIS][1], X2_MAX_POS); return; } #endif @@ -907,7 +907,7 @@ void process_commands() { current_position[X_AXIS] = 0;current_position[Y_AXIS] = 0; - #ifdef DUAL_X_CARRIAGE + #ifndef DUAL_X_CARRIAGE int x_axis_home_dir = home_dir(X_AXIS); #else int x_axis_home_dir = x_home_dir(active_extruder); From 2cb716f513dcd16c43cc97a6454876de87d7b0ec Mon Sep 17 00:00:00 2001 From: Guillaume Seguin Date: Tue, 23 Jul 2013 21:49:37 +0200 Subject: [PATCH 08/11] Run Marlin/language.h through dos2unix --- Marlin/language.h | 3044 ++++++++++++++++++++++----------------------- 1 file changed, 1522 insertions(+), 1522 deletions(-) diff --git a/Marlin/language.h b/Marlin/language.h index c331a0bdd9..f331a066d0 100644 --- a/Marlin/language.h +++ b/Marlin/language.h @@ -1,1524 +1,1524 @@ -#ifndef LANGUAGE_H -#define LANGUAGE_H - -// NOTE: IF YOU CHANGE THIS FILE / MERGE THIS FILE WITH CHANGES -// -// ==> ALWAYS TRY TO COMPILE MARLIN WITH/WITHOUT "ULTIPANEL" / "ULTRALCD" / "SDSUPPORT" #define IN "Configuration.h" -// ==> ALSO TRY ALL AVAILABLE "LANGUAGE_CHOICE" OPTIONS - -// Languages -// 1 English -// 2 Polish -// 3 French -// 4 German -// 5 Spanish -// 6 Russian -// 7 Italian -// 8 Portuguese -// 9 Finnish - -#ifndef LANGUAGE_CHOICE -#define LANGUAGE_CHOICE 1 // Pick your language from the list above -#endif - -#define PROTOCOL_VERSION "1.0" - -#if MOTHERBOARD == 7 || MOTHERBOARD == 71 - #define MACHINE_NAME "Ultimaker" - #define FIRMWARE_URL "http://firmware.ultimaker.com" -#elif MOTHERBOARD == 80 - #define MACHINE_NAME "Rumba" - #define FIRMWARE_URL "https://github.com/ErikZalm/Marlin/" -#elif MOTHERBOARD == 77 - #define MACHINE_NAME "3Drag" - #define FIRMWARE_URL "http://3dprint.elettronicain.it/" -#else - #ifdef CUSTOM_MENDEL_NAME - #define MACHINE_NAME CUSTOM_MENDEL_NAME - #else - #define MACHINE_NAME "Mendel" - #endif - #define FIRMWARE_URL "http://www.mendel-parts.com" -#endif - -#define STRINGIFY_(n) #n -#define STRINGIFY(n) STRINGIFY_(n) - -#if LANGUAGE_CHOICE == 1 - -// LCD Menu Messages - #define WELCOME_MSG MACHINE_NAME " Ready." - #define MSG_SD_INSERTED "Card inserted" - #define MSG_SD_REMOVED "Card removed" - #define MSG_MAIN "Main" - #define MSG_AUTOSTART "Autostart" - #define MSG_DISABLE_STEPPERS "Disable Steppers" - #define MSG_AUTO_HOME "Auto Home" - #define MSG_SET_ORIGIN "Set Origin" - #define MSG_PREHEAT_PLA "Preheat PLA" - #define MSG_PREHEAT_PLA_SETTINGS "Preheat PLA Conf" - #define MSG_PREHEAT_ABS "Preheat ABS" - #define MSG_PREHEAT_ABS_SETTINGS "Preheat ABS Conf" - #define MSG_COOLDOWN "Cooldown" - #define MSG_SWITCH_PS_ON "Switch Power On" - #define MSG_SWITCH_PS_OFF "Switch Power Off" - #define MSG_EXTRUDE "Extrude" - #define MSG_RETRACT "Retract" - #define MSG_MOVE_AXIS "Move Axis" - #define MSG_SPEED "Speed" - #define MSG_NOZZLE "Nozzle" - #define MSG_NOZZLE1 "Nozzle2" - #define MSG_NOZZLE2 "Nozzle3" - #define MSG_BED "Bed" - #define MSG_FAN_SPEED "Fan speed" - #define MSG_FLOW "Flow" - #define MSG_CONTROL "Control" - #define MSG_MIN " \002 Min" - #define MSG_MAX " \002 Max" - #define MSG_FACTOR " \002 Fact" - #define MSG_AUTOTEMP "Autotemp" - #define MSG_ON "On " - #define MSG_OFF "Off" - #define MSG_PID_P "PID-P" - #define MSG_PID_I "PID-I" - #define MSG_PID_D "PID-D" - #define MSG_PID_C "PID-C" - #define MSG_ACC "Accel" - #define MSG_VXY_JERK "Vxy-jerk" - #define MSG_VZ_JERK "Vz-jerk" - #define MSG_VE_JERK "Ve-jerk" - #define MSG_VMAX "Vmax " - #define MSG_X "x" - #define MSG_Y "y" - #define MSG_Z "z" - #define MSG_E "e" - #define MSG_VMIN "Vmin" - #define MSG_VTRAV_MIN "VTrav min" - #define MSG_AMAX "Amax " - #define MSG_A_RETRACT "A-retract" - #define MSG_XSTEPS "Xsteps/mm" - #define MSG_YSTEPS "Ysteps/mm" - #define MSG_ZSTEPS "Zsteps/mm" - #define MSG_ESTEPS "Esteps/mm" - #define MSG_RECTRACT "Rectract" - #define MSG_TEMPERATURE "Temperature" - #define MSG_MOTION "Motion" - #define MSG_CONTRAST "LCD contrast" - #define MSG_STORE_EPROM "Store memory" - #define MSG_LOAD_EPROM "Load memory" - #define MSG_RESTORE_FAILSAFE "Restore Failsafe" - #define MSG_REFRESH "Refresh" - #define MSG_WATCH "Info screen" - #define MSG_PREPARE "Prepare" - #define MSG_TUNE "Tune" - #define MSG_PAUSE_PRINT "Pause Print" - #define MSG_RESUME_PRINT "Resume Print" - #define MSG_STOP_PRINT "Stop Print" - #define MSG_CARD_MENU "Print from SD" - #define MSG_NO_CARD "No Card" - #define MSG_DWELL "Sleep..." - #define MSG_USERWAIT "Wait for user..." - #define MSG_RESUMING "Resuming print" - #define MSG_NO_MOVE "No move." - #define MSG_KILLED "KILLED. " - #define MSG_STOPPED "STOPPED. " - #define MSG_CONTROL_RETRACT "Retract mm" - #define MSG_CONTROL_RETRACTF "Retract F" - #define MSG_CONTROL_RETRACT_ZLIFT "Hop mm" - #define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm" - #define MSG_CONTROL_RETRACT_RECOVERF "UnRet F" - #define MSG_AUTORETRACT "AutoRetr." - #define MSG_FILAMENTCHANGE "Change filament" - #define MSG_INIT_SDCARD "Init. SD-Card" - #define MSG_CNG_SDCARD "Change SD-Card" - -// Serial Console Messages - - #define MSG_Enqueing "enqueing \"" - #define MSG_POWERUP "PowerUp" - #define MSG_EXTERNAL_RESET " External Reset" - #define MSG_BROWNOUT_RESET " Brown out Reset" - #define MSG_WATCHDOG_RESET " Watchdog Reset" - #define MSG_SOFTWARE_RESET " Software Reset" - #define MSG_MARLIN "Marlin " - #define MSG_AUTHOR " | Author: " - #define MSG_CONFIGURATION_VER " Last Updated: " - #define MSG_FREE_MEMORY " Free Memory: " - #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: " - #define MSG_OK "ok" - #define MSG_FILE_SAVED "Done saving file." - #define MSG_ERR_LINE_NO "Line Number is not Last Line Number+1, Last Line: " - #define MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line: " - #define MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line: " - #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No Line Number with checksum, Last Line: " - #define MSG_FILE_PRINTED "Done printing file" - #define MSG_BEGIN_FILE_LIST "Begin file list" - #define MSG_END_FILE_LIST "End file list" - #define MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder " - #define MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder " - #define MSG_M218_INVALID_EXTRUDER "M218 Invalid extruder " - #define MSG_ERR_NO_THERMISTORS "No thermistors - no temperature" - #define MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder " - #define MSG_HEATING "Heating..." - #define MSG_HEATING_COMPLETE "Heating done." - #define MSG_BED_HEATING "Bed Heating." - #define MSG_BED_DONE "Bed done." - #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n" - #define MSG_COUNT_X " Count X: " - #define MSG_ERR_KILLED "Printer halted. kill() called!" - #define MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)" - #define MSG_RESEND "Resend: " - #define MSG_UNKNOWN_COMMAND "Unknown command: \"" - #define MSG_ACTIVE_EXTRUDER "Active Extruder: " - #define MSG_INVALID_EXTRUDER "Invalid extruder" - #define MSG_X_MIN "x_min: " - #define MSG_X_MAX "x_max: " - #define MSG_Y_MIN "y_min: " - #define MSG_Y_MAX "y_max: " - #define MSG_Z_MIN "z_min: " - #define MSG_Z_MAX "z_max: " - #define MSG_M119_REPORT "Reporting endstop status" - #define MSG_ENDSTOP_HIT "TRIGGERED" - #define MSG_ENDSTOP_OPEN "open" - #define MSG_HOTEND_OFFSET "Hotend offsets:" - - #define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir" - #define MSG_SD_INIT_FAIL "SD init fail" - #define MSG_SD_VOL_INIT_FAIL "volume.init failed" - #define MSG_SD_OPENROOT_FAIL "openRoot failed" - #define MSG_SD_CARD_OK "SD card ok" - #define MSG_SD_WORKDIR_FAIL "workDir open failed" - #define MSG_SD_OPEN_FILE_FAIL "open failed, File: " - #define MSG_SD_FILE_OPENED "File opened: " - #define MSG_SD_SIZE " Size: " - #define MSG_SD_FILE_SELECTED "File selected" - #define MSG_SD_WRITE_TO_FILE "Writing to file: " - #define MSG_SD_PRINTING_BYTE "SD printing byte " - #define MSG_SD_NOT_PRINTING "Not SD printing" - #define MSG_SD_ERR_WRITE_TO_FILE "error writing to file" - #define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir: " - - #define MSG_STEPPER_TOO_HIGH "Steprate too high: " - #define MSG_ENDSTOPS_HIT "endstops hit: " - #define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented" - #define MSG_ERR_LONG_EXTRUDE_STOP " too long extrusion prevented" - -#endif - - -#if LANGUAGE_CHOICE == 2 - -// LCD Menu Messages - #define WELCOME_MSG MACHINE_NAME " Gotowe." - #define MSG_SD_INSERTED "Karta wlozona" - #define MSG_SD_REMOVED "Karta usunieta" - #define MSG_MAIN "Main" - #define MSG_AUTOSTART "Autostart" - #define MSG_DISABLE_STEPPERS "Wylacz silniki" - #define MSG_AUTO_HOME "Auto. poz. zerowa" - #define MSG_SET_ORIGIN "Ustaw punkt zerowy" - #define MSG_PREHEAT_PLA "Rozgrzej PLA" - #define MSG_PREHEAT_PLA_SETTINGS "Ustawienia roz. PLA" - #define MSG_PREHEAT_ABS "Rozgrzej ABS" - #define MSG_PREHEAT_ABS_SETTINGS "Ustawienia roz. ABS" - #define MSG_COOLDOWN "Chlodzenie" - #define MSG_SWITCH_PS_ON "Switch Power On" - #define MSG_SWITCH_PS_OFF "Switch Power Off" - #define MSG_EXTRUDE "Ekstruzja" - #define MSG_RETRACT "Cofanie" - #define MSG_MOVE_AXIS "Ruch osi" - #define MSG_SPEED "Predkosc" - #define MSG_NOZZLE "Dysza" - #define MSG_NOZZLE1 "Dysza2" - #define MSG_NOZZLE2 "Dysza3" - #define MSG_BED "Loze" - #define MSG_FAN_SPEED "Obroty wiatraka" - #define MSG_FLOW "Przeplyw" - #define MSG_CONTROL "Kontrola" - #define MSG_MIN " \002 Min" - #define MSG_MAX " \002 Max" - #define MSG_FACTOR " \002 Mnoznik" - #define MSG_AUTOTEMP "Auto. temp." - #define MSG_ON "Wl. " - #define MSG_OFF "Wyl." - #define MSG_PID_P "PID-P" - #define MSG_PID_I "PID-I" - #define MSG_PID_D "PID-D" - #define MSG_PID_C "PID-C" - #define MSG_ACC "Acc" - #define MSG_VXY_JERK "Zryw Vxy" - #define MSG_VZ_JERK "Zryw Vz" - #define MSG_VE_JERK "Zryw Ve" - #define MSG_VMAX "Vmax" - #define MSG_X "x" - #define MSG_Y "y" - #define MSG_Z "z" - #define MSG_E "e" - #define MSG_VMIN "Vmin" - #define MSG_VTRAV_MIN "Vskok min" - #define MSG_AMAX "Amax" - #define MSG_A_RETRACT "A-wycofanie" - #define MSG_XSTEPS "krokiX/mm" - #define MSG_YSTEPS "krokiY/mm" - #define MSG_ZSTEPS "krokiZ/mm" - #define MSG_ESTEPS "krokiE/mm" - #define MSG_RECTRACT "Wycofanie" - #define MSG_TEMPERATURE "Temperatura" - #define MSG_MOTION "Ruch" - #define MSG_CONTRAST "LCD contrast" - #define MSG_STORE_EPROM "Zapisz w pamieci" - #define MSG_LOAD_EPROM "Wczytaj z pamieci" - #define MSG_RESTORE_FAILSAFE " Ustawienia fabryczne" - #define MSG_REFRESH "\004Odswiez" - #define MSG_WATCH "Obserwuj" - #define MSG_PREPARE "Przygotuj" - #define MSG_CONTROL "Kontroluj" - #define MSG_TUNE "Strojenie" - #define MSG_PAUSE_PRINT "Pauza" - #define MSG_RESUME_PRINT "Wznowienie" - #define MSG_STOP_PRINT "Stop" - #define MSG_CARD_MENU "Menu SDCard" - #define MSG_NO_CARD "Brak karty" - #define MSG_DWELL "Uspij..." - #define MSG_USERWAIT "Czekaj na uzytkownika..." - #define MSG_RESUMING "Wznawiam drukowanie" - #define MSG_NO_MOVE "Brak ruchu." - #define MSG_PART_RELEASE "Czesciowe zwolnienie" - #define MSG_KILLED "Ubity. " - #define MSG_STOPPED "Zatrzymany. " - #define MSG_STEPPER_RELEASED "Zwolniony." - #define MSG_CONTROL_RETRACT "Wycofaj mm" - #define MSG_CONTROL_RETRACTF "Wycofaj F" - #define MSG_CONTROL_RETRACT_ZLIFT "Skok Z mm:" - #define MSG_CONTROL_RETRACT_RECOVER "Cof. wycof. +mm" - #define MSG_CONTROL_RETRACT_RECOVERF "Cof. wycof. F" - #define MSG_AUTORETRACT "Auto. wycofanie" - #define MSG_FILAMENTCHANGE "Change filament" - -// Serial Console Messages - - #define MSG_Enqueing "Kolejkowanie \"" - #define MSG_POWERUP "Zasilanie wlaczone" - #define MSG_EXTERNAL_RESET " Reset (zewnetrzny)" - #define MSG_BROWNOUT_RESET " Reset (spadek napiecia)" - #define MSG_WATCHDOG_RESET " Reset (watchdog)" - #define MSG_SOFTWARE_RESET " Reset (programowy)" - #define MSG_MARLIN "Marlin " - #define MSG_AUTHOR " | Autor: " - #define MSG_CONFIGURATION_VER " Ostatnia aktualizacja: " - #define MSG_FREE_MEMORY " Wolna pamiec: " - #define MSG_PLANNER_BUFFER_BYTES " Bufor planisty krokow (w bajtach): " - #define MSG_OK "ok" - #define MSG_FILE_SAVED "Plik zapisany." - #define MSG_ERR_LINE_NO "Numer linijki nie jest ostatnim numerem linijki+1; ostatnia linijka:" - #define MSG_ERR_CHECKSUM_MISMATCH "Niezgodna suma kontrolna; ostatnia linijka: " - #define MSG_ERR_NO_CHECKSUM "Brak sumy kontrolnej w linijce; ostatnia linijka:" - #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Brak numery linijki przy sumie kontrolnej; ostatnia linijka:" - #define MSG_FILE_PRINTED "Ukonczono wydruk z pliku" - #define MSG_BEGIN_FILE_LIST "Start listy plikow" - #define MSG_END_FILE_LIST "Koniec listy plikow" - #define MSG_M104_INVALID_EXTRUDER "M104 Niepoprawny ekstruder " - #define MSG_M105_INVALID_EXTRUDER "M105 Niepoprawny ekstruder " - #define MSG_M218_INVALID_EXTRUDER "M218 Niepoprawny ekstruder " - #define MSG_ERR_NO_THERMISTORS "Brak termistorow - brak temperatury :(" - #define MSG_M109_INVALID_EXTRUDER "M109 Niepoprawny ekstruder " - #define MSG_HEATING "Nagrzewanie ekstrudera..." - #define MSG_HEATING_COMPLETE "Nagrzewanie ekstrudera zakonczone." - #define MSG_BED_HEATING "Nagrzewanie loza..." - #define MSG_BED_DONE "Nagrzewanie loza zakonczone." - #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n" - #define MSG_COUNT_X " Liczenie X: " - #define MSG_ERR_KILLED "Drukarka zatrzymana. Wywolano kill()" - #define MSG_ERR_STOPPED "Drukarka zatrzymana z powodu bledu. Usun problem i zrestartuj drukartke komenda M999. (temperatura zostala zresetowana; ustaw temperature po restarcie)" - #define MSG_RESEND "Wyslij ponownie: " - #define MSG_UNKNOWN_COMMAND "Nieznane polecenie: \"" - #define MSG_ACTIVE_EXTRUDER "Aktywny ekstruder: " - #define MSG_INVALID_EXTRUDER "Niepoprawny ekstruder" - #define MSG_X_MIN "x_min: " - #define MSG_X_MAX "x_max: " - #define MSG_Y_MIN "y_min: " - #define MSG_Y_MAX "y_max: " - #define MSG_Z_MIN "z_min: " - #define MSG_Z_MAX "z_max: " - #define MSG_M119_REPORT "Zgloszenie statusu wylacznikow krancowych" - #define MSG_ENDSTOP_HIT "WYZWOLONY" - #define MSG_ENDSTOP_OPEN "otwarty" - #define MSG_HOTEND_OFFSET "Hotend offsets:" - - #define MSG_SD_CANT_OPEN_SUBDIR "Nie mozna otworzyc podkatalogu" - #define MSG_SD_INIT_FAIL "Blad inicjalizacji karty SD" - #define MSG_SD_VOL_INIT_FAIL "Blad inizjalizacji wolumenu" - #define MSG_SD_OPENROOT_FAIL "Blad odczytywania katalogu glownego" - #define MSG_SD_CARD_OK "Karta SD zainicjalizowana" - #define MSG_SD_WORKDIR_FAIL "Blad odczytywania katalogu roboczego" - #define MSG_SD_OPEN_FILE_FAIL "Nie mozna otworzyc pliku: " - #define MSG_SD_FILE_OPENED "Otwarto plik:" - #define MSG_SD_SIZE " Rozmiar:" - #define MSG_SD_FILE_SELECTED "Wybrano plik" - #define MSG_SD_WRITE_TO_FILE "Zapisywanie do pliku: " - #define MSG_SD_PRINTING_BYTE "Drukowanie z karty SD, bajt " - #define MSG_SD_NOT_PRINTING "Nie trwa drukowanie z karty SD" - #define MSG_SD_ERR_WRITE_TO_FILE "blad podczas zapisu do pliku" - #define MSG_SD_CANT_ENTER_SUBDIR "Nie mozna odczytac podkatalogu: " - - #define MSG_STEPPER_TOO_HIGH "Za duza czestotliwosc krokow: " - #define MSG_ENDSTOPS_HIT "Wylacznik krancowy zostal wyzwolony na pozycji: " - #define MSG_ERR_COLD_EXTRUDE_STOP " uniemozliwiono zimna ekstruzje" - #define MSG_ERR_LONG_EXTRUDE_STOP " uniemozliwiono zbyt dluga ekstruzje" - -#endif - - -#if LANGUAGE_CHOICE == 3 - -#define WELCOME_MSG MACHINE_NAME " Pret." -#define MSG_SD_INSERTED "Carte inseree" -#define MSG_SD_REMOVED "Carte retiree" -#define MSG_MAIN " Principal \003" -#define MSG_AUTOSTART " Demarrage auto." -#define MSG_DISABLE_STEPPERS " Desactiver moteurs" -#define MSG_AUTO_HOME " Home auto." -#define MSG_SET_ORIGIN " Regler origine" -#define MSG_PREHEAT_PLA " Prechauffage PLA" -#define MSG_PREHEAT_PLA_SETTINGS " Regl. prechauffe PLA" -#define MSG_PREHEAT_ABS " Prechauffage ABS" -#define MSG_PREHEAT_ABS_SETTINGS " Regl. prechauffe ABS" -#define MSG_COOLDOWN " Refroidissement" -#define MSG_SWITCH_PS_ON "Allumer alimentation" -#define MSG_SWITCH_PS_OFF "Eteindre alimentation" -#define MSG_EXTRUDE " Extrusion" -#define MSG_RETRACT " Retractation" -#define MSG_PREHEAT_PLA " Prechauffage PLA" -#define MSG_PREHEAT_ABS " Prechauffage ABS" -#define MSG_MOVE_AXIS " Deplacer axe \x7E" -#define MSG_SPEED " Vitesse:" -#define MSG_NOZZLE " \002Buse:" -#define MSG_NOZZLE1 " \002Buse2:" -#define MSG_NOZZLE2 " \002Buse3:" -#define MSG_BED " \002Lit:" -#define MSG_FAN_SPEED " Vitesse ventilateur:" -#define MSG_FLOW " Flux:" -#define MSG_CONTROL " Controle \003" -#define MSG_MIN " \002 Min:" -#define MSG_MAX " \002 Max:" -#define MSG_FACTOR " \002 Facteur:" -#define MSG_AUTOTEMP " Temp. Auto.:" -#define MSG_ON "Marche " -#define MSG_OFF "Arret" -#define MSG_PID_P " PID-P: " -#define MSG_PID_I " PID-I: " -#define MSG_PID_D " PID-D: " -#define MSG_PID_C " PID-C: " -#define MSG_ACC " Acc:" -#define MSG_VXY_JERK "Vxy-jerk" -#define MSG_VZ_JERK "Vz-jerk" -#define MSG_VE_JERK "Ve-jerk" -#define MSG_VMAX " Vmax " -#define MSG_X "x:" -#define MSG_Y "y:" -#define MSG_Z "z:" -#define MSG_E "e:" -#define MSG_VMIN " Vmin:" -#define MSG_VTRAV_MIN " Vdepl min:" -#define MSG_AMAX " Amax " -#define MSG_A_RETRACT " A-retract:" -#define MSG_XSTEPS " Xpas/mm:" -#define MSG_YSTEPS " Ypas/mm:" -#define MSG_ZSTEPS " Zpas/mm:" -#define MSG_ESTEPS " Epas/mm:" -#define MSG_MAIN_WIDE " Principal \003" -#define MSG_RECTRACT_WIDE " Rectractater \x7E" -#define MSG_TEMPERATURE_WIDE " Temperature \x7E" -#define MSG_TEMPERATURE_RTN " Temperature \003" -#define MSG_MOTION_WIDE " Mouvement \x7E" - #define MSG_CONTRAST "LCD contrast" -#define MSG_STORE_EPROM " Sauvegarder memoire" -#define MSG_LOAD_EPROM " Lire memoire" -#define MSG_RESTORE_FAILSAFE " Restaurer memoire" -#define MSG_REFRESH "\004Actualiser" -#define MSG_WATCH " Surveiller \003" -#define MSG_PREPARE " Preparer \x7E" -#define MSG_PREPARE_ALT " Prepare \003" -#define MSG_CONTROL_ARROW " Controle \x7E" -#define MSG_RETRACT_ARROW " Retracter \x7E" -#define MSG_TUNE " Regler \x7E" -#define MSG_PAUSE_PRINT " Pause impression \x7E" -#define MSG_RESUME_PRINT " Reprendre impression \x7E" -#define MSG_STOP_PRINT " Arreter impression \x7E" -#define MSG_CARD_MENU " Menu carte \x7E" -#define MSG_NO_CARD " Pas de carte" -#define MSG_DWELL "Repos..." -#define MSG_USERWAIT "Attente de l'utilisateur..." -#define MSG_NO_MOVE "Aucun mouvement." -#define MSG_PART_RELEASE "Relache partielle" -#define MSG_KILLED "TUE." -#define MSG_STOPPED "STOPPE." -#define MSG_STEPPER_RELEASED "RELACHE." -#define MSG_CONTROL_RETRACT " Retractation mm:" -#define MSG_CONTROL_RETRACTF " Retractation F:" -#define MSG_CONTROL_RETRACT_ZLIFT " Hop mm:" -#define MSG_CONTROL_RETRACT_RECOVER " UnRet +mm:" -#define MSG_CONTROL_RETRACT_RECOVERF " UnRet F:" -#define MSG_AUTORETRACT " Retract. Auto.:" -#define MSG_FILAMENTCHANGE "Change filament" - -// Serial Console Messages - -#define MSG_Enqueing "Mise en tampon \"" -#define MSG_POWERUP "Allumage" -#define MSG_EXTERNAL_RESET " RAZ Externe" -#define MSG_BROWNOUT_RESET " RAZ defaut alim." -#define MSG_WATCHDOG_RESET " RAZ Watchdog" -#define MSG_SOFTWARE_RESET " RAZ logicielle" -#define MSG_MARLIN "Marlin " -#define MSG_AUTHOR " | Auteur: " -#define MSG_CONFIGURATION_VER " Derniere MaJ: " -#define MSG_FREE_MEMORY " Memoire libre: " -#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: " -#define MSG_OK "ok" -#define MSG_FILE_SAVED "Fichier enregistre." -#define MSG_ERR_LINE_NO "Le numero de ligne n'est pas la derniere ligne + 1, derniere ligne: " -#define MSG_ERR_CHECKSUM_MISMATCH "Erreur somme de controle, derniere ligne: " -#define MSG_ERR_NO_CHECKSUM "Pas de somme de controle avec le numero de ligne, derniere ligne: " -#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Pas de numero de ligne avec somme de controle, derniere ligne: " -#define MSG_FILE_PRINTED "Impression terminee" -#define MSG_BEGIN_FILE_LIST "Debut de la liste de fichiers" -#define MSG_END_FILE_LIST "Fin de la liste de fichiers" -#define MSG_M104_INVALID_EXTRUDER "M104 Extruder invalide" -#define MSG_M105_INVALID_EXTRUDER "M105 Extruder invalide" -#define MSG_M218_INVALID_EXTRUDER "M218 Extruder invalide" -#define MSG_ERR_NO_THERMISTORS "Pas de thermistor, pas de temperature" -#define MSG_M109_INVALID_EXTRUDER "M109 Extruder invalide " -#define MSG_HEATING "En chauffe..." -#define MSG_HEATING_COMPLETE "Chauffe terminee." -#define MSG_BED_HEATING "Chauffe du lit." -#define MSG_BED_DONE "Chauffe du lit terminee." -#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n" -#define MSG_COUNT_X " Compteur X: " -#define MSG_ERR_KILLED "Impression arretee. kill() appelee!" -#define MSG_ERR_STOPPED "Impression arretee a cause d'erreurs. Corriger les erreurs et utiliser M999 pour la reprendre. (Temperature remise a zero. Reactivez la apres redemarrage)" -#define MSG_RESEND "Renvoie: " -#define MSG_UNKNOWN_COMMAND "Commande inconnue: \"" -#define MSG_ACTIVE_EXTRUDER "Extrudeur actif: " -#define MSG_INVALID_EXTRUDER "Extrudeur invalide" -#define MSG_X_MIN "x_min: " -#define MSG_X_MAX "x_max: " -#define MSG_Y_MIN "y_min: " -#define MSG_Y_MAX "y_max: " -#define MSG_Z_MIN "z_min: " -#define MSG_Z_MAX "z_max: " -#define MSG_M119_REPORT "Affichage du status des fin de course" -#define MSG_ENDSTOP_HIT "DECLENCHE" -#define MSG_ENDSTOP_OPEN "OUVERT" -#define MSG_HOTEND_OFFSET "Hotend offsets:" - -#define MSG_SD_CANT_OPEN_SUBDIR "Impossible d'ouvrir le sous-repertoire" -#define MSG_SD_INIT_FAIL "Echec de l'initialisation de la SD" -#define MSG_SD_VOL_INIT_FAIL "Echec de volume.init" -#define MSG_SD_OPENROOT_FAIL "Echec openRoot" -#define MSG_SD_CARD_OK "Carte SD Ok" -#define MSG_SD_WORKDIR_FAIL "Echec d'ouverture workDir" -#define MSG_SD_OPEN_FILE_FAIL "Echec d'ouverture, Fichier: " -#define MSG_SD_FILE_OPENED "Fichier ouvert: " -#define MSG_SD_SIZE " Taille: " -#define MSG_SD_FILE_SELECTED "Fichier selectionne" -#define MSG_SD_WRITE_TO_FILE "Ecriture dans le fichier: " -#define MSG_SD_PRINTING_BYTE "Octet impression SD " -#define MSG_SD_NOT_PRINTING "Pas d'impression SD" -#define MSG_SD_ERR_WRITE_TO_FILE "Erreur d'ecriture dans le fichier" -#define MSG_SD_CANT_ENTER_SUBDIR "Impossible d'entrer dans le sous-repertoire: " - -#define MSG_STEPPER_TOO_HIGH "Steprate trop eleve: " -#define MSG_ENDSTOPS_HIT "Fin de course atteint: " -#define MSG_ERR_COLD_EXTRUDE_STOP " Extrusion a froid evitee" -#define MSG_ERR_LONG_EXTRUDE_STOP " Extrusion longue evitee" - -#endif - - -#if LANGUAGE_CHOICE == 4 - -// LCD Menu Messages - - #define WELCOME_MSG MACHINE_NAME " Bereit." - - #define MSG_SD_INSERTED "SDKarte erkannt" - #define MSG_SD_REMOVED "SDKarte entfernt" - #define MSG_MAIN "Hauptmenü" - #define MSG_AUTOSTART "Autostart" - #define MSG_DISABLE_STEPPERS "Stepper abschalten" - #define MSG_AUTO_HOME "Auto Nullpunkt" - #define MSG_SET_ORIGIN "Setze Nullpunkt" - #define MSG_PREHEAT_PLA "Vorwärmen PLA" - #define MSG_PREHEAT_PLA_SETTINGS "Vorwärmen PLA Einstellungen" - #define MSG_PREHEAT_ABS "Vorwärmen ABS" - #define MSG_PREHEAT_ABS_SETTINGS "Vorwärmen ABS Einstellungen" - #define MSG_COOLDOWN "Abkühlen" - #define MSG_SWITCH_PS_ON "Switch Power On" - #define MSG_SWITCH_PS_OFF "Switch Power Off" - #define MSG_EXTRUDE "Extrude" - #define MSG_RETRACT "Retract" - #define MSG_MOVE_AXIS "Achsen bewegen" - #define MSG_SPEED "Geschw" - #define MSG_NOZZLE "Düse" - #define MSG_NOZZLE1 "Düse2" - #define MSG_NOZZLE2 "Düse3" - #define MSG_BED "Bett" - #define MSG_FAN_SPEED "Lüftergeschw." - #define MSG_FLOW "Fluss" - #define MSG_CONTROL "Einstellungen" - #define MSG_MIN "\002 Min" - #define MSG_MAX "\002 Max" - #define MSG_FACTOR "\002 Faktor" - #define MSG_AUTOTEMP "AutoTemp" - #define MSG_ON "Ein" - #define MSG_OFF "Aus" - #define MSG_PID_P "PID-P" - #define MSG_PID_I "PID-I" - #define MSG_PID_D "PID-D" - #define MSG_PID_C "PID-C" - #define MSG_ACC "Acc" - #define MSG_VXY_JERK "Vxy-jerk" - #define MSG_VZ_JERK "Vz-jerk" - #define MSG_VE_JERK "Ve-jerk" - #define MSG_VMAX "Vmax " - #define MSG_X "x" - #define MSG_Y "y" - #define MSG_Z "z" - #define MSG_E "e" - #define MSG_VMIN "Vmin" - #define MSG_VTRAV_MIN "VTrav min" - #define MSG_AMAX "Amax " - #define MSG_A_RETRACT "A-Retract" - #define MSG_XSTEPS "Xsteps/mm" - #define MSG_YSTEPS "Ysteps/mm" - #define MSG_ZSTEPS "Zsteps/mm" - #define MSG_ESTEPS "Esteps/mm" - #define MSG_RECTRACT_WIDE "Rectract" - #define MSG_WATCH "Beobachten" - #define MSG_TEMPERATURE "Temperatur" - #define MSG_MOTION "Bewegung" - #define MSG_CONTRAST "LCD contrast" - #define MSG_STORE_EPROM "EPROM speichern" - #define MSG_LOAD_EPROM "EPROM laden" - #define MSG_RESTORE_FAILSAFE "Standardkonfig." - #define MSG_REFRESH "Aktualisieren" - #define MSG_PREPARE "Vorbereitung" - #define MSG_CONTROL "Einstellungen" - #define MSG_TUNE "Justierung" - #define MSG_PAUSE_PRINT "Druck anhalten" - #define MSG_RESUME_PRINT "Druck fortsetz" - #define MSG_STOP_PRINT "Druck stoppen" - #define MSG_CARD_MENU "SDKarten Menü" - #define MSG_NO_CARD "Keine SDKarte" - #define MSG_DWELL "Warten..." - #define MSG_USERWAIT "Warte auf Nutzer..." - #define MSG_RESUMING "Druck fortsetzung" - #define MSG_NO_MOVE "Kein Zug." - #define MSG_PART_RELEASE "Stepper tlw frei" - #define MSG_KILLED "KILLED" - #define MSG_STOPPED "GESTOPPT" - #define MSG_STEPPER_RELEASED "Stepper frei" - #define MSG_CONTROL_RETRACT "Retract mm" - #define MSG_CONTROL_RETRACTF "Retract F" - #define MSG_CONTROL_RETRACT_ZLIFT "Hop mm" - #define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm" - #define MSG_CONTROL_RETRACT_RECOVERF "UnRet F" - #define MSG_AUTORETRACT "AutoRetr." - #define MSG_FILAMENTCHANGE "Filament wechseln" - -// Serial Console Messages - - #define MSG_Enqueing "enqueing \"" - #define MSG_POWERUP "PowerUp" - #define MSG_EXTERNAL_RESET " External Reset" - #define MSG_BROWNOUT_RESET " Brown out Reset" - #define MSG_WATCHDOG_RESET " Watchdog Reset" - #define MSG_SOFTWARE_RESET " Software Reset" - #define MSG_MARLIN "Marlin: " - #define MSG_AUTHOR " | Author: " - #define MSG_CONFIGURATION_VER " Last Updated: " - #define MSG_FREE_MEMORY " Free Memory: " - #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: " - #define MSG_OK "ok" - #define MSG_FILE_SAVED "Done saving file." - #define MSG_ERR_LINE_NO "Line Number is not Last Line Number+1, Last Line:" - #define MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line:" - #define MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line:" - #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No Line Number with checksum, Last Line:" - #define MSG_FILE_PRINTED "Done printing file" - #define MSG_BEGIN_FILE_LIST "Begin file list" - #define MSG_END_FILE_LIST "End file list" - #define MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder " - #define MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder " - #define MSG_M218_INVALID_EXTRUDER "M218 Invalid extruder " - #define MSG_ERR_NO_THERMISTORS "No thermistors - no temp" - #define MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder " - #define MSG_HEATING "Heating..." - #define MSG_HEATING_COMPLETE "Heating done." - #define MSG_BED_HEATING "Bed Heating." - #define MSG_BED_DONE "Bed done." - #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n" - #define MSG_COUNT_X " Count X:" - #define MSG_ERR_KILLED "Printer halted. kill() called !!" - #define MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart!" - #define MSG_RESEND "Resend:" - #define MSG_UNKNOWN_COMMAND "Unknown command:\"" - #define MSG_ACTIVE_EXTRUDER "Active Extruder: " - #define MSG_INVALID_EXTRUDER "Invalid extruder" - #define MSG_X_MIN "x_min: " - #define MSG_X_MAX "x_max: " - #define MSG_Y_MIN "y_min: " - #define MSG_Y_MAX "y_max: " - #define MSG_Z_MIN "z_min: " - #define MSG_Z_MAX "z_max: " - #define MSG_M119_REPORT "Reporting endstop status" - #define MSG_ENDSTOP_HIT "TRIGGERED" - #define MSG_ENDSTOP_OPEN "open" - #define MSG_HOTEND_OFFSET "Hotend offsets:" - - #define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir" - #define MSG_SD_INIT_FAIL "SD init fail" - #define MSG_SD_VOL_INIT_FAIL "volume.init failed" - #define MSG_SD_OPENROOT_FAIL "openRoot failed" - #define MSG_SD_CARD_OK "SD card ok" - #define MSG_SD_WORKDIR_FAIL "workDir open failed" - #define MSG_SD_OPEN_FILE_FAIL "open failed, File: " - #define MSG_SD_FILE_OPENED "File opened:" - #define MSG_SD_SIZE " Size:" - #define MSG_SD_FILE_SELECTED "File selected" - #define MSG_SD_WRITE_TO_FILE "Writing to file: " - #define MSG_SD_PRINTING_BYTE "SD printing byte " - #define MSG_SD_NOT_PRINTING "Not SD printing" - #define MSG_SD_ERR_WRITE_TO_FILE "error writing to file" - #define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir:" - - #define MSG_STEPPER_TOO_HIGH "Steprate too high : " - #define MSG_ENDSTOPS_HIT "endstops hit: " - #define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented" - #define MSG_ERR_LONG_EXTRUDE_STOP " too long extrusion prevented" - -#endif - - -#if LANGUAGE_CHOICE == 5 - -// LCD Menu Messages -#define WELCOME_MSG MACHINE_NAME "Lista." -#define MSG_SD_INSERTED "Tarjeta SD Colocada" -#define MSG_SD_REMOVED "Tarjeta SD Retirada" -#define MSG_MAIN "Menu Principal" -#define MSG_AUTOSTART " Autostart" -#define MSG_DISABLE_STEPPERS "Apagar Motores" -#define MSG_AUTO_HOME "Llevar al Origen" // "Llevar Ejes al Cero" -#define MSG_SET_ORIGIN "Establecer Cero" -#define MSG_PREHEAT_PLA "Precalentar PLA" -#define MSG_PREHEAT_PLA_SETTINGS "Ajustar temp. PLA" -#define MSG_PREHEAT_ABS "Precalentar ABS" -#define MSG_PREHEAT_ABS_SETTINGS "Ajustar temp. ABS" -#define MSG_COOLDOWN "Enfriar" -#define MSG_SWITCH_PS_ON "Switch Power On" -#define MSG_SWITCH_PS_OFF "Switch Power Off" -#define MSG_EXTRUDE "Extruir" -#define MSG_RETRACT "Retraer" -#define MSG_MOVE_AXIS "Mover Ejes" -#define MSG_SPEED "Velocidad" -#define MSG_NOZZLE "Nozzle" -#define MSG_NOZZLE1 "Nozzle2" -#define MSG_NOZZLE2 "Nozzle3" -#define MSG_BED "Base" -#define MSG_FAN_SPEED "Ventilador" -#define MSG_FLOW "Flujo" -#define MSG_CONTROL "Control" -#define MSG_MIN "\002 Min" -#define MSG_MAX "\002 Max" -#define MSG_FACTOR "\002 Fact" -#define MSG_AUTOTEMP "Autotemp" -#define MSG_ON "On" -#define MSG_OFF "Off" -#define MSG_PID_P "PID-P" -#define MSG_PID_I "PID-I" -#define MSG_PID_D "PID-D" -#define MSG_PID_C "PID-C" -#define MSG_ACC "Acel" -#define MSG_VXY_JERK "Vxy-jerk" -#define MSG_VZ_JERK "Vz-jerk" -#define MSG_VE_JERK "Ve-jerk" -#define MSG_VMAX "Vmax" -#define MSG_X "x" -#define MSG_Y "y" -#define MSG_Z "z" -#define MSG_E "e" -#define MSG_VMIN "Vmin" -#define MSG_VTRAV_MIN "VTrav min" -#define MSG_AMAX "Amax" -#define MSG_A_RETRACT "A-retrac." -#define MSG_XSTEPS "X pasos/mm" -#define MSG_YSTEPS "Y pasos/mm" -#define MSG_ZSTEPS "Z pasos/mm" -#define MSG_ESTEPS "E pasos/mm" -#define MSG_RECTRACT "Retraer" -#define MSG_TEMPERATURE "Temperatura" -#define MSG_MOTION "Movimiento" -#define MSG_STORE_EPROM "Guardar Memoria" -#define MSG_LOAD_EPROM "Cargar Memoria" -#define MSG_RESTORE_FAILSAFE "Rest. de emergencia" -#define MSG_REFRESH "Volver a cargar" -#define MSG_WATCH "Monitorizar" -#define MSG_PREPARE "Preparar" -#define MSG_TUNE "Ajustar" -#define MSG_PAUSE_PRINT "Pausar Impresion" -#define MSG_RESUME_PRINT "Reanudar Impresion" -#define MSG_STOP_PRINT "Detener Impresion" -#define MSG_CARD_MENU "Menu de SD" -#define MSG_NO_CARD "No hay Tarjeta SD" -#define MSG_DWELL "Reposo..." -#define MSG_USERWAIT "Esperando Ordenes..." -#define MSG_RESUMING "Resumiendo Impresion" -#define MSG_NO_MOVE "Sin movimiento" -#define MSG_KILLED "PARADA DE EMERGENCIA. " -#define MSG_STOPPED "PARADA." -#define MSG_CONTROL_RETRACT "Retraer mm" -#define MSG_CONTROL_RETRACTF "Retraer F" -#define MSG_CONTROL_RETRACT_ZLIFT "Levantar mm" -#define MSG_CONTROL_RETRACT_RECOVER "DesRet +mm" -#define MSG_CONTROL_RETRACT_RECOVERF "DesRet F" -#define MSG_AUTORETRACT "AutoRetr." -#define MSG_FILAMENTCHANGE "Change filament" -#define MSG_INIT_SDCARD "Iniciando. Tarjeta-SD" -#define MSG_CNG_SDCARD "Cambiar Tarjeta-SD" -#define MSG_RECTRACT_WIDE "Retraer" -#define MSG_TEMPERATURE_WIDE "Temperatura" -#define MSG_TEMPERATURE_RTN "Temperatura" -#define MSG_MAIN_WIDE "Menu Principal" -#define MSG_MOTION_WIDE "Movimiento" -#define MSG_PREPARE_ALT "Preparar" -#define MSG_CONTROL_ARROW "Control" -#define MSG_RETRACT_ARROW "Retraer" -#define MSG_PART_RELEASE "Desacople Parcial" -#define MSG_STEPPER_RELEASED "Desacoplada." - -// Serial Console Messages - -#define MSG_Enqueing "En cola \"" -#define MSG_POWERUP "PowerUp" -#define MSG_EXTERNAL_RESET " Reset Externo" -#define MSG_BROWNOUT_RESET " Reset por Voltaje Incorrecto" -#define MSG_WATCHDOG_RESET " Reset por Bloqueo" -#define MSG_SOFTWARE_RESET " Reset por Software" -#define MSG_MARLIN "Marlin " -#define MSG_AUTHOR " | Autor: " -#define MSG_CONFIGURATION_VER " Ultima actualizacion: " -#define MSG_FREE_MEMORY " Memoria libre: " -#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: " -#define MSG_OK "ok" -#define MSG_FILE_SAVED "Guardado." -#define MSG_ERR_LINE_NO "El Numero de Linea no es igual al Ultimo Numero de Linea+1, Ultima Linea:" -#define MSG_ERR_CHECKSUM_MISMATCH "el checksum no coincide, Ultima Linea:" -#define MSG_ERR_NO_CHECKSUM "No se pudo hallar el Checksum con el numero de linea, Ultima Linea:" -#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No se hallo el Numero de Linea con el Checksum, Ultima Linea:" -#define MSG_FILE_PRINTED "Impresion terminada" -#define MSG_BEGIN_FILE_LIST "Comienzo de la lista de archivos" -#define MSG_END_FILE_LIST "Fin de la lista de archivos" -#define MSG_M104_INVALID_EXTRUDER "M104 Extrusor Invalido " -#define MSG_M105_INVALID_EXTRUDER "M105 Extrusor Invalido " -#define MSG_M218_INVALID_EXTRUDER "M218 Extrusor Invalido " -#define MSG_ERR_NO_THERMISTORS "No hay termistores - no temp" -#define MSG_M109_INVALID_EXTRUDER "M109 Extrusor Invalido " -#define MSG_HEATING "Calentando..." -#define MSG_HEATING_COMPLETE "Calentamiento Hecho." -#define MSG_BED_HEATING "Calentando la base." -#define MSG_BED_DONE "Base Caliente." -#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n" -#define MSG_COUNT_X " Cuenta X:" -#define MSG_ERR_KILLED "¡¡Impresora Parada con kill()!!" -#define MSG_ERR_STOPPED "¡Impresora parada por errores. Arregle el error y use M999 Para reiniciar!. (La temperatura se reestablece. Ajustela antes de continuar)" -#define MSG_RESEND "Reenviar:" -#define MSG_UNKNOWN_COMMAND "Comando Desconocido:\"" -#define MSG_ACTIVE_EXTRUDER "Extrusor Activo: " -#define MSG_INVALID_EXTRUDER "Extrusor Invalido" -#define MSG_X_MIN "x_min: " -#define MSG_X_MAX "x_max: " -#define MSG_Y_MIN "y_min: " -#define MSG_Y_MAX "y_max: " -#define MSG_Z_MIN "z_min: " -#define MSG_Z_MAX "z_max: " -#define MSG_M119_REPORT "Comprobando fines de carrera." -#define MSG_ENDSTOP_HIT "PULSADO" -#define MSG_ENDSTOP_OPEN "abierto" -#define MSG_HOTEND_OFFSET "Hotend offsets:" -#define MSG_SD_CANT_OPEN_SUBDIR "No se pudo abrir la subcarpeta." -#define MSG_SD_INIT_FAIL "Fallo al iniciar la SD" -#define MSG_SD_VOL_INIT_FAIL "Fallo al montar el volumen" -#define MSG_SD_OPENROOT_FAIL "Fallo al abrir la carpeta raiz" -#define MSG_SD_CARD_OK "Tarjeta SD OK" -#define MSG_SD_WORKDIR_FAIL "Fallo al abrir la carpeta de trabajo" -#define MSG_SD_OPEN_FILE_FAIL "Error al abrir, Archivo: " -#define MSG_SD_FILE_OPENED "Archivo abierto:" -#define MSG_SD_SIZE " Tamaño:" -#define MSG_SD_FILE_SELECTED "Archivo Seleccionado" -#define MSG_SD_WRITE_TO_FILE "Escribiendo en el archivo: " -#define MSG_SD_PRINTING_BYTE "SD imprimiendo el byte " -#define MSG_SD_NOT_PRINTING "No se esta imprimiendo con SD" -#define MSG_SD_ERR_WRITE_TO_FILE "Error al escribir en el archivo" -#define MSG_SD_CANT_ENTER_SUBDIR "No se puede abrir la carpeta:" - -#define MSG_STEPPER_TOO_HIGH "Steprate demasiado alto : " -#define MSG_ENDSTOPS_HIT "Se ha tocado el fin de carril: " -#define MSG_ERR_COLD_EXTRUDE_STOP " extrusion fria evitada" -#define MSG_ERR_LONG_EXTRUDE_STOP " extrusion demasiado larga evitada" - -#endif - -#if LANGUAGE_CHOICE == 6 - -// LCD Menu Messages -#define WELCOME_MSG MACHINE_NAME " Готов" -#define MSG_SD_INSERTED "Карта вставлена" -#define MSG_SD_REMOVED "Карта извлечена" -#define MSG_MAIN " Меню \003" -#define MSG_AUTOSTART " Автостарт " -#define MSG_DISABLE_STEPPERS " Выключить двигатели" -#define MSG_AUTO_HOME " Парковка " -#define MSG_SET_ORIGIN " Запомнить ноль " -#define MSG_PREHEAT_PLA " Преднагрев PLA " -#define MSG_PREHEAT_PLA_SETTINGS " Настр. преднагр.PLA" -#define MSG_PREHEAT_ABS " Преднагрев ABS " -#define MSG_PREHEAT_ABS_SETTINGS " Настр. преднагр.ABS" -#define MSG_COOLDOWN " Охлаждение " -#define MSG_SWITCH_PS_ON "Switch Power On" -#define MSG_SWITCH_PS_OFF "Switch Power Off" -#define MSG_EXTRUDE " Экструзия " -#define MSG_RETRACT " Откат" -#define MSG_MOVE_AXIS " Движение по осям \x7E" -#define MSG_SPEED " Скорость:" -#define MSG_NOZZLE " \002 Фильера:" -#define MSG_NOZZLE1 " \002 Фильера2:" -#define MSG_NOZZLE2 " \002 Фильера3:" -#define MSG_BED " \002 Кровать:" -#define MSG_FAN_SPEED " Куллер:" -#define MSG_FLOW " Поток:" -#define MSG_CONTROL " Настройки \003" -#define MSG_MIN " \002 Минимум:" -#define MSG_MAX " \002 Максимум:" -#define MSG_FACTOR " \002 Фактор:" -#define MSG_AUTOTEMP " Autotemp:" -#define MSG_ON "Вкл. " -#define MSG_OFF "Выкл. " -#define MSG_PID_P " PID-P: " -#define MSG_PID_I " PID-I: " -#define MSG_PID_D " PID-D: " -#define MSG_PID_C " PID-C: " -#define MSG_ACC " Acc:" -#define MSG_VXY_JERK " Vxy-jerk: " -#define MSG_VZ_JERK "Vz-jerk" -#define MSG_VE_JERK "Ve-jerk" -#define MSG_VMAX " Vmax " -#define MSG_X "x:" -#define MSG_Y "y:" -#define MSG_Z "z:" -#define MSG_E "e:" -#define MSG_VMIN " Vmin:" -#define MSG_VTRAV_MIN " VTrav min:" -#define MSG_AMAX " Amax " -#define MSG_A_RETRACT " A-retract:" -#define MSG_XSTEPS " X шаг/mm:" -#define MSG_YSTEPS " Y шаг/mm:" -#define MSG_ZSTEPS " Z шаг/mm:" -#define MSG_ESTEPS " E шаг/mm:" -#define MSG_RECTRACT " Откат подачи \x7E" -#define MSG_TEMPERATURE " Температура \x7E" -#define MSG_MOTION " Скорости \x7E" - #define MSG_CONTRAST "LCD contrast" -#define MSG_STORE_EPROM " Сохранить настройки" -#define MSG_LOAD_EPROM " Загрузить настройки" -#define MSG_RESTORE_FAILSAFE " Сброс настроек " -#define MSG_REFRESH "\004Обновить " -#define MSG_WATCH " Обзор \003" -#define MSG_PREPARE " Действия \x7E" -#define MSG_TUNE " Настройки \x7E" -#define MSG_PAUSE_PRINT " Пауза печати \x7E" -#define MSG_RESUME_PRINT " Продолжить печать \x7E" -#define MSG_STOP_PRINT " Остановить печать \x7E" -#define MSG_CARD_MENU " Меню карты \x7E" -#define MSG_NO_CARD " Нет карты" -#define MSG_DWELL "Сон..." -#define MSG_USERWAIT "Нажмите для продолж." -#define MSG_NO_MOVE "Нет движения. " -#define MSG_PART_RELEASE " Извлечение принта " -#define MSG_KILLED "УБИТО. " -#define MSG_STOPPED "ОСТАНОВЛЕНО. " -#define MSG_CONTROL_RETRACT " Откат mm:" -#define MSG_CONTROL_RETRACTF " Откат F:" -#define MSG_CONTROL_RETRACT_ZLIFT " Прыжок mm:" -#define MSG_CONTROL_RETRACT_RECOVER " Возврат +mm:" -#define MSG_CONTROL_RETRACT_RECOVERF " Возврат F:" -#define MSG_AUTORETRACT " АвтоОткат:" -#define MSG_FILAMENTCHANGE "Change filament" - -// Serial Console Messages - -#define MSG_Enqueing "Запланировано \"" -#define MSG_POWERUP "Включение питания" -#define MSG_EXTERNAL_RESET " Внешний сброс" -#define MSG_BROWNOUT_RESET " Brown out сброс" -#define MSG_WATCHDOG_RESET " Watchdog сброс" -#define MSG_SOFTWARE_RESET " программный сброс" -#define MSG_MARLIN "Marlin " -#define MSG_AUTHOR " | Автор: " -#define MSG_CONFIGURATION_VER " Последнее обновление: " -#define MSG_FREE_MEMORY " Памяти свободно: " -#define MSG_PLANNER_BUFFER_BYTES " Буффер очереди команд Bytes: " -#define MSG_OK "ok" -#define MSG_FILE_SAVED "Файл записан." -#define MSG_ERR_LINE_NO "Номен строки это не последняя строка+1, последняя строка:" -#define MSG_ERR_CHECKSUM_MISMATCH "контрольная сумма не совпадает, последняя строка:" -#define MSG_ERR_NO_CHECKSUM "нет контрольной суммы для строки, последняя строка:" -#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "нет строки для контрольной суммы, последняя строка:" -#define MSG_FILE_PRINTED "Печать файла завершена" -#define MSG_BEGIN_FILE_LIST "Список файлов" -#define MSG_END_FILE_LIST "Конец списка файлов" -#define MSG_M104_INVALID_EXTRUDER "M104 ошибка экструдера " -#define MSG_M105_INVALID_EXTRUDER "M105 ошибка экструдера " -#define MSG_M218_INVALID_EXTRUDER "M218 ошибка экструдера " -#define MSG_ERR_NO_THERMISTORS "Нет термистра - нет температуры" -#define MSG_M109_INVALID_EXTRUDER "M109 ошибка экструдера " -#define MSG_HEATING "Нагрев... " -#define MSG_HEATING_COMPLETE "Наргето. " -#define MSG_BED_HEATING "Нагрев стола... " -#define MSG_BED_DONE "Стол нагрет. " -#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n" -#define MSG_COUNT_X " Count X:" -#define MSG_ERR_KILLED "Принтер остановлен. вызов kill() !!" -#define MSG_ERR_STOPPED "Ошибка принтера, останов. Устраните неисправность и используйте M999 для перезагрузки!. (Температура недоступна. Проверьте датчики)" -#define MSG_RESEND "Переотправка:" -#define MSG_UNKNOWN_COMMAND "Неизвестная команда:\"" -#define MSG_ACTIVE_EXTRUDER "Активный экструдер: " -#define MSG_INVALID_EXTRUDER "Ошибка экструдера" -#define MSG_X_MIN "x_min:" -#define MSG_X_MAX "x_max:" -#define MSG_Y_MIN "y_min:" -#define MSG_Y_MAX "y_max:" -#define MSG_Z_MIN "z_min:" -#define MSG_Z_MAX "z_max:" -#define MSG_M119_REPORT "Статус концевиков" -#define MSG_ENDSTOP_HIT "Срабатывание концевика" -#define MSG_ENDSTOP_OPEN "Концевик освобожден" -#define MSG_HOTEND_OFFSET "Hotend offsets:" -#define MSG_SD_CANT_OPEN_SUBDIR "Не открыть папку" -#define MSG_SD_INIT_FAIL "Ошибка инициализации SD" -#define MSG_SD_VOL_INIT_FAIL "Ошибка инициализации раздела" -#define MSG_SD_OPENROOT_FAIL "Не прочесть содержимое корня" -#define MSG_SD_CARD_OK "SD карта в порядке" -#define MSG_SD_WORKDIR_FAIL "не открыть рабочую папку" -#define MSG_SD_OPEN_FILE_FAIL "Ошибка чтения, файл: " -#define MSG_SD_FILE_OPENED "Файл открыт:" -#define MSG_SD_SIZE " Размер:" -#define MSG_SD_FILE_SELECTED "Файл выбран" -#define MSG_SD_WRITE_TO_FILE "Запись в файл: " -#define MSG_SD_PRINTING_BYTE "SD печать byte " -#define MSG_SD_NOT_PRINTING "нет SD печати" -#define MSG_SD_ERR_WRITE_TO_FILE "ошибка записи в файл" -#define MSG_SD_CANT_ENTER_SUBDIR "Не зайти в папку:" -#define MSG_STEPPER_TOO_HIGH "Частота шагов очень высока : " -#define MSG_ENDSTOPS_HIT "концевик сработал: " -#define MSG_ERR_COLD_EXTRUDE_STOP " защита холодной экструзии" -#define MSG_ERR_LONG_EXTRUDE_STOP " защита превышения длинны экструзии" - -#endif - - -#if LANGUAGE_CHOICE == 7 - - // LCD Menu Messages - #define WELCOME_MSG MACHINE_NAME " Pronta" - #define MSG_SD_INSERTED "SD Card inserita" - #define MSG_SD_REMOVED "SD Card rimossa" - #define MSG_MAIN "Menu principale" - #define MSG_AUTOSTART "Autostart" - #define MSG_DISABLE_STEPPERS "Disabilita Motori" - #define MSG_AUTO_HOME "Auto Home" - #define MSG_SET_ORIGIN "Imposta Origine" - #define MSG_PREHEAT_PLA "Preriscalda PLA" - #define MSG_PREHEAT_PLA_SETTINGS "Preris. PLA Conf" - #define MSG_PREHEAT_ABS "Preriscalda ABS" +#ifndef LANGUAGE_H +#define LANGUAGE_H + +// NOTE: IF YOU CHANGE THIS FILE / MERGE THIS FILE WITH CHANGES +// +// ==> ALWAYS TRY TO COMPILE MARLIN WITH/WITHOUT "ULTIPANEL" / "ULTRALCD" / "SDSUPPORT" #define IN "Configuration.h" +// ==> ALSO TRY ALL AVAILABLE "LANGUAGE_CHOICE" OPTIONS + +// Languages +// 1 English +// 2 Polish +// 3 French +// 4 German +// 5 Spanish +// 6 Russian +// 7 Italian +// 8 Portuguese +// 9 Finnish + +#ifndef LANGUAGE_CHOICE +#define LANGUAGE_CHOICE 1 // Pick your language from the list above +#endif + +#define PROTOCOL_VERSION "1.0" + +#if MOTHERBOARD == 7 || MOTHERBOARD == 71 + #define MACHINE_NAME "Ultimaker" + #define FIRMWARE_URL "http://firmware.ultimaker.com" +#elif MOTHERBOARD == 80 + #define MACHINE_NAME "Rumba" + #define FIRMWARE_URL "https://github.com/ErikZalm/Marlin/" +#elif MOTHERBOARD == 77 + #define MACHINE_NAME "3Drag" + #define FIRMWARE_URL "http://3dprint.elettronicain.it/" +#else + #ifdef CUSTOM_MENDEL_NAME + #define MACHINE_NAME CUSTOM_MENDEL_NAME + #else + #define MACHINE_NAME "Mendel" + #endif + #define FIRMWARE_URL "http://www.mendel-parts.com" +#endif + +#define STRINGIFY_(n) #n +#define STRINGIFY(n) STRINGIFY_(n) + +#if LANGUAGE_CHOICE == 1 + +// LCD Menu Messages + #define WELCOME_MSG MACHINE_NAME " Ready." + #define MSG_SD_INSERTED "Card inserted" + #define MSG_SD_REMOVED "Card removed" + #define MSG_MAIN "Main" + #define MSG_AUTOSTART "Autostart" + #define MSG_DISABLE_STEPPERS "Disable Steppers" + #define MSG_AUTO_HOME "Auto Home" + #define MSG_SET_ORIGIN "Set Origin" + #define MSG_PREHEAT_PLA "Preheat PLA" + #define MSG_PREHEAT_PLA_SETTINGS "Preheat PLA Conf" + #define MSG_PREHEAT_ABS "Preheat ABS" + #define MSG_PREHEAT_ABS_SETTINGS "Preheat ABS Conf" + #define MSG_COOLDOWN "Cooldown" + #define MSG_SWITCH_PS_ON "Switch Power On" + #define MSG_SWITCH_PS_OFF "Switch Power Off" + #define MSG_EXTRUDE "Extrude" + #define MSG_RETRACT "Retract" + #define MSG_MOVE_AXIS "Move Axis" + #define MSG_SPEED "Speed" + #define MSG_NOZZLE "Nozzle" + #define MSG_NOZZLE1 "Nozzle2" + #define MSG_NOZZLE2 "Nozzle3" + #define MSG_BED "Bed" + #define MSG_FAN_SPEED "Fan speed" + #define MSG_FLOW "Flow" + #define MSG_CONTROL "Control" + #define MSG_MIN " \002 Min" + #define MSG_MAX " \002 Max" + #define MSG_FACTOR " \002 Fact" + #define MSG_AUTOTEMP "Autotemp" + #define MSG_ON "On " + #define MSG_OFF "Off" + #define MSG_PID_P "PID-P" + #define MSG_PID_I "PID-I" + #define MSG_PID_D "PID-D" + #define MSG_PID_C "PID-C" + #define MSG_ACC "Accel" + #define MSG_VXY_JERK "Vxy-jerk" + #define MSG_VZ_JERK "Vz-jerk" + #define MSG_VE_JERK "Ve-jerk" + #define MSG_VMAX "Vmax " + #define MSG_X "x" + #define MSG_Y "y" + #define MSG_Z "z" + #define MSG_E "e" + #define MSG_VMIN "Vmin" + #define MSG_VTRAV_MIN "VTrav min" + #define MSG_AMAX "Amax " + #define MSG_A_RETRACT "A-retract" + #define MSG_XSTEPS "Xsteps/mm" + #define MSG_YSTEPS "Ysteps/mm" + #define MSG_ZSTEPS "Zsteps/mm" + #define MSG_ESTEPS "Esteps/mm" + #define MSG_RECTRACT "Rectract" + #define MSG_TEMPERATURE "Temperature" + #define MSG_MOTION "Motion" + #define MSG_CONTRAST "LCD contrast" + #define MSG_STORE_EPROM "Store memory" + #define MSG_LOAD_EPROM "Load memory" + #define MSG_RESTORE_FAILSAFE "Restore Failsafe" + #define MSG_REFRESH "Refresh" + #define MSG_WATCH "Info screen" + #define MSG_PREPARE "Prepare" + #define MSG_TUNE "Tune" + #define MSG_PAUSE_PRINT "Pause Print" + #define MSG_RESUME_PRINT "Resume Print" + #define MSG_STOP_PRINT "Stop Print" + #define MSG_CARD_MENU "Print from SD" + #define MSG_NO_CARD "No Card" + #define MSG_DWELL "Sleep..." + #define MSG_USERWAIT "Wait for user..." + #define MSG_RESUMING "Resuming print" + #define MSG_NO_MOVE "No move." + #define MSG_KILLED "KILLED. " + #define MSG_STOPPED "STOPPED. " + #define MSG_CONTROL_RETRACT "Retract mm" + #define MSG_CONTROL_RETRACTF "Retract F" + #define MSG_CONTROL_RETRACT_ZLIFT "Hop mm" + #define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm" + #define MSG_CONTROL_RETRACT_RECOVERF "UnRet F" + #define MSG_AUTORETRACT "AutoRetr." + #define MSG_FILAMENTCHANGE "Change filament" + #define MSG_INIT_SDCARD "Init. SD-Card" + #define MSG_CNG_SDCARD "Change SD-Card" + +// Serial Console Messages + + #define MSG_Enqueing "enqueing \"" + #define MSG_POWERUP "PowerUp" + #define MSG_EXTERNAL_RESET " External Reset" + #define MSG_BROWNOUT_RESET " Brown out Reset" + #define MSG_WATCHDOG_RESET " Watchdog Reset" + #define MSG_SOFTWARE_RESET " Software Reset" + #define MSG_MARLIN "Marlin " + #define MSG_AUTHOR " | Author: " + #define MSG_CONFIGURATION_VER " Last Updated: " + #define MSG_FREE_MEMORY " Free Memory: " + #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: " + #define MSG_OK "ok" + #define MSG_FILE_SAVED "Done saving file." + #define MSG_ERR_LINE_NO "Line Number is not Last Line Number+1, Last Line: " + #define MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line: " + #define MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line: " + #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No Line Number with checksum, Last Line: " + #define MSG_FILE_PRINTED "Done printing file" + #define MSG_BEGIN_FILE_LIST "Begin file list" + #define MSG_END_FILE_LIST "End file list" + #define MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder " + #define MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder " + #define MSG_M218_INVALID_EXTRUDER "M218 Invalid extruder " + #define MSG_ERR_NO_THERMISTORS "No thermistors - no temperature" + #define MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder " + #define MSG_HEATING "Heating..." + #define MSG_HEATING_COMPLETE "Heating done." + #define MSG_BED_HEATING "Bed Heating." + #define MSG_BED_DONE "Bed done." + #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n" + #define MSG_COUNT_X " Count X: " + #define MSG_ERR_KILLED "Printer halted. kill() called!" + #define MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)" + #define MSG_RESEND "Resend: " + #define MSG_UNKNOWN_COMMAND "Unknown command: \"" + #define MSG_ACTIVE_EXTRUDER "Active Extruder: " + #define MSG_INVALID_EXTRUDER "Invalid extruder" + #define MSG_X_MIN "x_min: " + #define MSG_X_MAX "x_max: " + #define MSG_Y_MIN "y_min: " + #define MSG_Y_MAX "y_max: " + #define MSG_Z_MIN "z_min: " + #define MSG_Z_MAX "z_max: " + #define MSG_M119_REPORT "Reporting endstop status" + #define MSG_ENDSTOP_HIT "TRIGGERED" + #define MSG_ENDSTOP_OPEN "open" + #define MSG_HOTEND_OFFSET "Hotend offsets:" + + #define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir" + #define MSG_SD_INIT_FAIL "SD init fail" + #define MSG_SD_VOL_INIT_FAIL "volume.init failed" + #define MSG_SD_OPENROOT_FAIL "openRoot failed" + #define MSG_SD_CARD_OK "SD card ok" + #define MSG_SD_WORKDIR_FAIL "workDir open failed" + #define MSG_SD_OPEN_FILE_FAIL "open failed, File: " + #define MSG_SD_FILE_OPENED "File opened: " + #define MSG_SD_SIZE " Size: " + #define MSG_SD_FILE_SELECTED "File selected" + #define MSG_SD_WRITE_TO_FILE "Writing to file: " + #define MSG_SD_PRINTING_BYTE "SD printing byte " + #define MSG_SD_NOT_PRINTING "Not SD printing" + #define MSG_SD_ERR_WRITE_TO_FILE "error writing to file" + #define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir: " + + #define MSG_STEPPER_TOO_HIGH "Steprate too high: " + #define MSG_ENDSTOPS_HIT "endstops hit: " + #define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented" + #define MSG_ERR_LONG_EXTRUDE_STOP " too long extrusion prevented" + +#endif + + +#if LANGUAGE_CHOICE == 2 + +// LCD Menu Messages + #define WELCOME_MSG MACHINE_NAME " Gotowe." + #define MSG_SD_INSERTED "Karta wlozona" + #define MSG_SD_REMOVED "Karta usunieta" + #define MSG_MAIN "Main" + #define MSG_AUTOSTART "Autostart" + #define MSG_DISABLE_STEPPERS "Wylacz silniki" + #define MSG_AUTO_HOME "Auto. poz. zerowa" + #define MSG_SET_ORIGIN "Ustaw punkt zerowy" + #define MSG_PREHEAT_PLA "Rozgrzej PLA" + #define MSG_PREHEAT_PLA_SETTINGS "Ustawienia roz. PLA" + #define MSG_PREHEAT_ABS "Rozgrzej ABS" + #define MSG_PREHEAT_ABS_SETTINGS "Ustawienia roz. ABS" + #define MSG_COOLDOWN "Chlodzenie" + #define MSG_SWITCH_PS_ON "Switch Power On" + #define MSG_SWITCH_PS_OFF "Switch Power Off" + #define MSG_EXTRUDE "Ekstruzja" + #define MSG_RETRACT "Cofanie" + #define MSG_MOVE_AXIS "Ruch osi" + #define MSG_SPEED "Predkosc" + #define MSG_NOZZLE "Dysza" + #define MSG_NOZZLE1 "Dysza2" + #define MSG_NOZZLE2 "Dysza3" + #define MSG_BED "Loze" + #define MSG_FAN_SPEED "Obroty wiatraka" + #define MSG_FLOW "Przeplyw" + #define MSG_CONTROL "Kontrola" + #define MSG_MIN " \002 Min" + #define MSG_MAX " \002 Max" + #define MSG_FACTOR " \002 Mnoznik" + #define MSG_AUTOTEMP "Auto. temp." + #define MSG_ON "Wl. " + #define MSG_OFF "Wyl." + #define MSG_PID_P "PID-P" + #define MSG_PID_I "PID-I" + #define MSG_PID_D "PID-D" + #define MSG_PID_C "PID-C" + #define MSG_ACC "Acc" + #define MSG_VXY_JERK "Zryw Vxy" + #define MSG_VZ_JERK "Zryw Vz" + #define MSG_VE_JERK "Zryw Ve" + #define MSG_VMAX "Vmax" + #define MSG_X "x" + #define MSG_Y "y" + #define MSG_Z "z" + #define MSG_E "e" + #define MSG_VMIN "Vmin" + #define MSG_VTRAV_MIN "Vskok min" + #define MSG_AMAX "Amax" + #define MSG_A_RETRACT "A-wycofanie" + #define MSG_XSTEPS "krokiX/mm" + #define MSG_YSTEPS "krokiY/mm" + #define MSG_ZSTEPS "krokiZ/mm" + #define MSG_ESTEPS "krokiE/mm" + #define MSG_RECTRACT "Wycofanie" + #define MSG_TEMPERATURE "Temperatura" + #define MSG_MOTION "Ruch" + #define MSG_CONTRAST "LCD contrast" + #define MSG_STORE_EPROM "Zapisz w pamieci" + #define MSG_LOAD_EPROM "Wczytaj z pamieci" + #define MSG_RESTORE_FAILSAFE " Ustawienia fabryczne" + #define MSG_REFRESH "\004Odswiez" + #define MSG_WATCH "Obserwuj" + #define MSG_PREPARE "Przygotuj" + #define MSG_CONTROL "Kontroluj" + #define MSG_TUNE "Strojenie" + #define MSG_PAUSE_PRINT "Pauza" + #define MSG_RESUME_PRINT "Wznowienie" + #define MSG_STOP_PRINT "Stop" + #define MSG_CARD_MENU "Menu SDCard" + #define MSG_NO_CARD "Brak karty" + #define MSG_DWELL "Uspij..." + #define MSG_USERWAIT "Czekaj na uzytkownika..." + #define MSG_RESUMING "Wznawiam drukowanie" + #define MSG_NO_MOVE "Brak ruchu." + #define MSG_PART_RELEASE "Czesciowe zwolnienie" + #define MSG_KILLED "Ubity. " + #define MSG_STOPPED "Zatrzymany. " + #define MSG_STEPPER_RELEASED "Zwolniony." + #define MSG_CONTROL_RETRACT "Wycofaj mm" + #define MSG_CONTROL_RETRACTF "Wycofaj F" + #define MSG_CONTROL_RETRACT_ZLIFT "Skok Z mm:" + #define MSG_CONTROL_RETRACT_RECOVER "Cof. wycof. +mm" + #define MSG_CONTROL_RETRACT_RECOVERF "Cof. wycof. F" + #define MSG_AUTORETRACT "Auto. wycofanie" + #define MSG_FILAMENTCHANGE "Change filament" + +// Serial Console Messages + + #define MSG_Enqueing "Kolejkowanie \"" + #define MSG_POWERUP "Zasilanie wlaczone" + #define MSG_EXTERNAL_RESET " Reset (zewnetrzny)" + #define MSG_BROWNOUT_RESET " Reset (spadek napiecia)" + #define MSG_WATCHDOG_RESET " Reset (watchdog)" + #define MSG_SOFTWARE_RESET " Reset (programowy)" + #define MSG_MARLIN "Marlin " + #define MSG_AUTHOR " | Autor: " + #define MSG_CONFIGURATION_VER " Ostatnia aktualizacja: " + #define MSG_FREE_MEMORY " Wolna pamiec: " + #define MSG_PLANNER_BUFFER_BYTES " Bufor planisty krokow (w bajtach): " + #define MSG_OK "ok" + #define MSG_FILE_SAVED "Plik zapisany." + #define MSG_ERR_LINE_NO "Numer linijki nie jest ostatnim numerem linijki+1; ostatnia linijka:" + #define MSG_ERR_CHECKSUM_MISMATCH "Niezgodna suma kontrolna; ostatnia linijka: " + #define MSG_ERR_NO_CHECKSUM "Brak sumy kontrolnej w linijce; ostatnia linijka:" + #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Brak numery linijki przy sumie kontrolnej; ostatnia linijka:" + #define MSG_FILE_PRINTED "Ukonczono wydruk z pliku" + #define MSG_BEGIN_FILE_LIST "Start listy plikow" + #define MSG_END_FILE_LIST "Koniec listy plikow" + #define MSG_M104_INVALID_EXTRUDER "M104 Niepoprawny ekstruder " + #define MSG_M105_INVALID_EXTRUDER "M105 Niepoprawny ekstruder " + #define MSG_M218_INVALID_EXTRUDER "M218 Niepoprawny ekstruder " + #define MSG_ERR_NO_THERMISTORS "Brak termistorow - brak temperatury :(" + #define MSG_M109_INVALID_EXTRUDER "M109 Niepoprawny ekstruder " + #define MSG_HEATING "Nagrzewanie ekstrudera..." + #define MSG_HEATING_COMPLETE "Nagrzewanie ekstrudera zakonczone." + #define MSG_BED_HEATING "Nagrzewanie loza..." + #define MSG_BED_DONE "Nagrzewanie loza zakonczone." + #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n" + #define MSG_COUNT_X " Liczenie X: " + #define MSG_ERR_KILLED "Drukarka zatrzymana. Wywolano kill()" + #define MSG_ERR_STOPPED "Drukarka zatrzymana z powodu bledu. Usun problem i zrestartuj drukartke komenda M999. (temperatura zostala zresetowana; ustaw temperature po restarcie)" + #define MSG_RESEND "Wyslij ponownie: " + #define MSG_UNKNOWN_COMMAND "Nieznane polecenie: \"" + #define MSG_ACTIVE_EXTRUDER "Aktywny ekstruder: " + #define MSG_INVALID_EXTRUDER "Niepoprawny ekstruder" + #define MSG_X_MIN "x_min: " + #define MSG_X_MAX "x_max: " + #define MSG_Y_MIN "y_min: " + #define MSG_Y_MAX "y_max: " + #define MSG_Z_MIN "z_min: " + #define MSG_Z_MAX "z_max: " + #define MSG_M119_REPORT "Zgloszenie statusu wylacznikow krancowych" + #define MSG_ENDSTOP_HIT "WYZWOLONY" + #define MSG_ENDSTOP_OPEN "otwarty" + #define MSG_HOTEND_OFFSET "Hotend offsets:" + + #define MSG_SD_CANT_OPEN_SUBDIR "Nie mozna otworzyc podkatalogu" + #define MSG_SD_INIT_FAIL "Blad inicjalizacji karty SD" + #define MSG_SD_VOL_INIT_FAIL "Blad inizjalizacji wolumenu" + #define MSG_SD_OPENROOT_FAIL "Blad odczytywania katalogu glownego" + #define MSG_SD_CARD_OK "Karta SD zainicjalizowana" + #define MSG_SD_WORKDIR_FAIL "Blad odczytywania katalogu roboczego" + #define MSG_SD_OPEN_FILE_FAIL "Nie mozna otworzyc pliku: " + #define MSG_SD_FILE_OPENED "Otwarto plik:" + #define MSG_SD_SIZE " Rozmiar:" + #define MSG_SD_FILE_SELECTED "Wybrano plik" + #define MSG_SD_WRITE_TO_FILE "Zapisywanie do pliku: " + #define MSG_SD_PRINTING_BYTE "Drukowanie z karty SD, bajt " + #define MSG_SD_NOT_PRINTING "Nie trwa drukowanie z karty SD" + #define MSG_SD_ERR_WRITE_TO_FILE "blad podczas zapisu do pliku" + #define MSG_SD_CANT_ENTER_SUBDIR "Nie mozna odczytac podkatalogu: " + + #define MSG_STEPPER_TOO_HIGH "Za duza czestotliwosc krokow: " + #define MSG_ENDSTOPS_HIT "Wylacznik krancowy zostal wyzwolony na pozycji: " + #define MSG_ERR_COLD_EXTRUDE_STOP " uniemozliwiono zimna ekstruzje" + #define MSG_ERR_LONG_EXTRUDE_STOP " uniemozliwiono zbyt dluga ekstruzje" + +#endif + + +#if LANGUAGE_CHOICE == 3 + +#define WELCOME_MSG MACHINE_NAME " Pret." +#define MSG_SD_INSERTED "Carte inseree" +#define MSG_SD_REMOVED "Carte retiree" +#define MSG_MAIN " Principal \003" +#define MSG_AUTOSTART " Demarrage auto." +#define MSG_DISABLE_STEPPERS " Desactiver moteurs" +#define MSG_AUTO_HOME " Home auto." +#define MSG_SET_ORIGIN " Regler origine" +#define MSG_PREHEAT_PLA " Prechauffage PLA" +#define MSG_PREHEAT_PLA_SETTINGS " Regl. prechauffe PLA" +#define MSG_PREHEAT_ABS " Prechauffage ABS" +#define MSG_PREHEAT_ABS_SETTINGS " Regl. prechauffe ABS" +#define MSG_COOLDOWN " Refroidissement" +#define MSG_SWITCH_PS_ON "Allumer alimentation" +#define MSG_SWITCH_PS_OFF "Eteindre alimentation" +#define MSG_EXTRUDE " Extrusion" +#define MSG_RETRACT " Retractation" +#define MSG_PREHEAT_PLA " Prechauffage PLA" +#define MSG_PREHEAT_ABS " Prechauffage ABS" +#define MSG_MOVE_AXIS " Deplacer axe \x7E" +#define MSG_SPEED " Vitesse:" +#define MSG_NOZZLE " \002Buse:" +#define MSG_NOZZLE1 " \002Buse2:" +#define MSG_NOZZLE2 " \002Buse3:" +#define MSG_BED " \002Lit:" +#define MSG_FAN_SPEED " Vitesse ventilateur:" +#define MSG_FLOW " Flux:" +#define MSG_CONTROL " Controle \003" +#define MSG_MIN " \002 Min:" +#define MSG_MAX " \002 Max:" +#define MSG_FACTOR " \002 Facteur:" +#define MSG_AUTOTEMP " Temp. Auto.:" +#define MSG_ON "Marche " +#define MSG_OFF "Arret" +#define MSG_PID_P " PID-P: " +#define MSG_PID_I " PID-I: " +#define MSG_PID_D " PID-D: " +#define MSG_PID_C " PID-C: " +#define MSG_ACC " Acc:" +#define MSG_VXY_JERK "Vxy-jerk" +#define MSG_VZ_JERK "Vz-jerk" +#define MSG_VE_JERK "Ve-jerk" +#define MSG_VMAX " Vmax " +#define MSG_X "x:" +#define MSG_Y "y:" +#define MSG_Z "z:" +#define MSG_E "e:" +#define MSG_VMIN " Vmin:" +#define MSG_VTRAV_MIN " Vdepl min:" +#define MSG_AMAX " Amax " +#define MSG_A_RETRACT " A-retract:" +#define MSG_XSTEPS " Xpas/mm:" +#define MSG_YSTEPS " Ypas/mm:" +#define MSG_ZSTEPS " Zpas/mm:" +#define MSG_ESTEPS " Epas/mm:" +#define MSG_MAIN_WIDE " Principal \003" +#define MSG_RECTRACT_WIDE " Rectractater \x7E" +#define MSG_TEMPERATURE_WIDE " Temperature \x7E" +#define MSG_TEMPERATURE_RTN " Temperature \003" +#define MSG_MOTION_WIDE " Mouvement \x7E" + #define MSG_CONTRAST "LCD contrast" +#define MSG_STORE_EPROM " Sauvegarder memoire" +#define MSG_LOAD_EPROM " Lire memoire" +#define MSG_RESTORE_FAILSAFE " Restaurer memoire" +#define MSG_REFRESH "\004Actualiser" +#define MSG_WATCH " Surveiller \003" +#define MSG_PREPARE " Preparer \x7E" +#define MSG_PREPARE_ALT " Prepare \003" +#define MSG_CONTROL_ARROW " Controle \x7E" +#define MSG_RETRACT_ARROW " Retracter \x7E" +#define MSG_TUNE " Regler \x7E" +#define MSG_PAUSE_PRINT " Pause impression \x7E" +#define MSG_RESUME_PRINT " Reprendre impression \x7E" +#define MSG_STOP_PRINT " Arreter impression \x7E" +#define MSG_CARD_MENU " Menu carte \x7E" +#define MSG_NO_CARD " Pas de carte" +#define MSG_DWELL "Repos..." +#define MSG_USERWAIT "Attente de l'utilisateur..." +#define MSG_NO_MOVE "Aucun mouvement." +#define MSG_PART_RELEASE "Relache partielle" +#define MSG_KILLED "TUE." +#define MSG_STOPPED "STOPPE." +#define MSG_STEPPER_RELEASED "RELACHE." +#define MSG_CONTROL_RETRACT " Retractation mm:" +#define MSG_CONTROL_RETRACTF " Retractation F:" +#define MSG_CONTROL_RETRACT_ZLIFT " Hop mm:" +#define MSG_CONTROL_RETRACT_RECOVER " UnRet +mm:" +#define MSG_CONTROL_RETRACT_RECOVERF " UnRet F:" +#define MSG_AUTORETRACT " Retract. Auto.:" +#define MSG_FILAMENTCHANGE "Change filament" + +// Serial Console Messages + +#define MSG_Enqueing "Mise en tampon \"" +#define MSG_POWERUP "Allumage" +#define MSG_EXTERNAL_RESET " RAZ Externe" +#define MSG_BROWNOUT_RESET " RAZ defaut alim." +#define MSG_WATCHDOG_RESET " RAZ Watchdog" +#define MSG_SOFTWARE_RESET " RAZ logicielle" +#define MSG_MARLIN "Marlin " +#define MSG_AUTHOR " | Auteur: " +#define MSG_CONFIGURATION_VER " Derniere MaJ: " +#define MSG_FREE_MEMORY " Memoire libre: " +#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: " +#define MSG_OK "ok" +#define MSG_FILE_SAVED "Fichier enregistre." +#define MSG_ERR_LINE_NO "Le numero de ligne n'est pas la derniere ligne + 1, derniere ligne: " +#define MSG_ERR_CHECKSUM_MISMATCH "Erreur somme de controle, derniere ligne: " +#define MSG_ERR_NO_CHECKSUM "Pas de somme de controle avec le numero de ligne, derniere ligne: " +#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Pas de numero de ligne avec somme de controle, derniere ligne: " +#define MSG_FILE_PRINTED "Impression terminee" +#define MSG_BEGIN_FILE_LIST "Debut de la liste de fichiers" +#define MSG_END_FILE_LIST "Fin de la liste de fichiers" +#define MSG_M104_INVALID_EXTRUDER "M104 Extruder invalide" +#define MSG_M105_INVALID_EXTRUDER "M105 Extruder invalide" +#define MSG_M218_INVALID_EXTRUDER "M218 Extruder invalide" +#define MSG_ERR_NO_THERMISTORS "Pas de thermistor, pas de temperature" +#define MSG_M109_INVALID_EXTRUDER "M109 Extruder invalide " +#define MSG_HEATING "En chauffe..." +#define MSG_HEATING_COMPLETE "Chauffe terminee." +#define MSG_BED_HEATING "Chauffe du lit." +#define MSG_BED_DONE "Chauffe du lit terminee." +#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n" +#define MSG_COUNT_X " Compteur X: " +#define MSG_ERR_KILLED "Impression arretee. kill() appelee!" +#define MSG_ERR_STOPPED "Impression arretee a cause d'erreurs. Corriger les erreurs et utiliser M999 pour la reprendre. (Temperature remise a zero. Reactivez la apres redemarrage)" +#define MSG_RESEND "Renvoie: " +#define MSG_UNKNOWN_COMMAND "Commande inconnue: \"" +#define MSG_ACTIVE_EXTRUDER "Extrudeur actif: " +#define MSG_INVALID_EXTRUDER "Extrudeur invalide" +#define MSG_X_MIN "x_min: " +#define MSG_X_MAX "x_max: " +#define MSG_Y_MIN "y_min: " +#define MSG_Y_MAX "y_max: " +#define MSG_Z_MIN "z_min: " +#define MSG_Z_MAX "z_max: " +#define MSG_M119_REPORT "Affichage du status des fin de course" +#define MSG_ENDSTOP_HIT "DECLENCHE" +#define MSG_ENDSTOP_OPEN "OUVERT" +#define MSG_HOTEND_OFFSET "Hotend offsets:" + +#define MSG_SD_CANT_OPEN_SUBDIR "Impossible d'ouvrir le sous-repertoire" +#define MSG_SD_INIT_FAIL "Echec de l'initialisation de la SD" +#define MSG_SD_VOL_INIT_FAIL "Echec de volume.init" +#define MSG_SD_OPENROOT_FAIL "Echec openRoot" +#define MSG_SD_CARD_OK "Carte SD Ok" +#define MSG_SD_WORKDIR_FAIL "Echec d'ouverture workDir" +#define MSG_SD_OPEN_FILE_FAIL "Echec d'ouverture, Fichier: " +#define MSG_SD_FILE_OPENED "Fichier ouvert: " +#define MSG_SD_SIZE " Taille: " +#define MSG_SD_FILE_SELECTED "Fichier selectionne" +#define MSG_SD_WRITE_TO_FILE "Ecriture dans le fichier: " +#define MSG_SD_PRINTING_BYTE "Octet impression SD " +#define MSG_SD_NOT_PRINTING "Pas d'impression SD" +#define MSG_SD_ERR_WRITE_TO_FILE "Erreur d'ecriture dans le fichier" +#define MSG_SD_CANT_ENTER_SUBDIR "Impossible d'entrer dans le sous-repertoire: " + +#define MSG_STEPPER_TOO_HIGH "Steprate trop eleve: " +#define MSG_ENDSTOPS_HIT "Fin de course atteint: " +#define MSG_ERR_COLD_EXTRUDE_STOP " Extrusion a froid evitee" +#define MSG_ERR_LONG_EXTRUDE_STOP " Extrusion longue evitee" + +#endif + + +#if LANGUAGE_CHOICE == 4 + +// LCD Menu Messages + + #define WELCOME_MSG MACHINE_NAME " Bereit." + + #define MSG_SD_INSERTED "SDKarte erkannt" + #define MSG_SD_REMOVED "SDKarte entfernt" + #define MSG_MAIN "Hauptmenü" + #define MSG_AUTOSTART "Autostart" + #define MSG_DISABLE_STEPPERS "Stepper abschalten" + #define MSG_AUTO_HOME "Auto Nullpunkt" + #define MSG_SET_ORIGIN "Setze Nullpunkt" + #define MSG_PREHEAT_PLA "Vorwärmen PLA" + #define MSG_PREHEAT_PLA_SETTINGS "Vorwärmen PLA Einstellungen" + #define MSG_PREHEAT_ABS "Vorwärmen ABS" + #define MSG_PREHEAT_ABS_SETTINGS "Vorwärmen ABS Einstellungen" + #define MSG_COOLDOWN "Abkühlen" + #define MSG_SWITCH_PS_ON "Switch Power On" + #define MSG_SWITCH_PS_OFF "Switch Power Off" + #define MSG_EXTRUDE "Extrude" + #define MSG_RETRACT "Retract" + #define MSG_MOVE_AXIS "Achsen bewegen" + #define MSG_SPEED "Geschw" + #define MSG_NOZZLE "Düse" + #define MSG_NOZZLE1 "Düse2" + #define MSG_NOZZLE2 "Düse3" + #define MSG_BED "Bett" + #define MSG_FAN_SPEED "Lüftergeschw." + #define MSG_FLOW "Fluss" + #define MSG_CONTROL "Einstellungen" + #define MSG_MIN "\002 Min" + #define MSG_MAX "\002 Max" + #define MSG_FACTOR "\002 Faktor" + #define MSG_AUTOTEMP "AutoTemp" + #define MSG_ON "Ein" + #define MSG_OFF "Aus" + #define MSG_PID_P "PID-P" + #define MSG_PID_I "PID-I" + #define MSG_PID_D "PID-D" + #define MSG_PID_C "PID-C" + #define MSG_ACC "Acc" + #define MSG_VXY_JERK "Vxy-jerk" + #define MSG_VZ_JERK "Vz-jerk" + #define MSG_VE_JERK "Ve-jerk" + #define MSG_VMAX "Vmax " + #define MSG_X "x" + #define MSG_Y "y" + #define MSG_Z "z" + #define MSG_E "e" + #define MSG_VMIN "Vmin" + #define MSG_VTRAV_MIN "VTrav min" + #define MSG_AMAX "Amax " + #define MSG_A_RETRACT "A-Retract" + #define MSG_XSTEPS "Xsteps/mm" + #define MSG_YSTEPS "Ysteps/mm" + #define MSG_ZSTEPS "Zsteps/mm" + #define MSG_ESTEPS "Esteps/mm" + #define MSG_RECTRACT_WIDE "Rectract" + #define MSG_WATCH "Beobachten" + #define MSG_TEMPERATURE "Temperatur" + #define MSG_MOTION "Bewegung" + #define MSG_CONTRAST "LCD contrast" + #define MSG_STORE_EPROM "EPROM speichern" + #define MSG_LOAD_EPROM "EPROM laden" + #define MSG_RESTORE_FAILSAFE "Standardkonfig." + #define MSG_REFRESH "Aktualisieren" + #define MSG_PREPARE "Vorbereitung" + #define MSG_CONTROL "Einstellungen" + #define MSG_TUNE "Justierung" + #define MSG_PAUSE_PRINT "Druck anhalten" + #define MSG_RESUME_PRINT "Druck fortsetz" + #define MSG_STOP_PRINT "Druck stoppen" + #define MSG_CARD_MENU "SDKarten Menü" + #define MSG_NO_CARD "Keine SDKarte" + #define MSG_DWELL "Warten..." + #define MSG_USERWAIT "Warte auf Nutzer..." + #define MSG_RESUMING "Druck fortsetzung" + #define MSG_NO_MOVE "Kein Zug." + #define MSG_PART_RELEASE "Stepper tlw frei" + #define MSG_KILLED "KILLED" + #define MSG_STOPPED "GESTOPPT" + #define MSG_STEPPER_RELEASED "Stepper frei" + #define MSG_CONTROL_RETRACT "Retract mm" + #define MSG_CONTROL_RETRACTF "Retract F" + #define MSG_CONTROL_RETRACT_ZLIFT "Hop mm" + #define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm" + #define MSG_CONTROL_RETRACT_RECOVERF "UnRet F" + #define MSG_AUTORETRACT "AutoRetr." + #define MSG_FILAMENTCHANGE "Filament wechseln" + +// Serial Console Messages + + #define MSG_Enqueing "enqueing \"" + #define MSG_POWERUP "PowerUp" + #define MSG_EXTERNAL_RESET " External Reset" + #define MSG_BROWNOUT_RESET " Brown out Reset" + #define MSG_WATCHDOG_RESET " Watchdog Reset" + #define MSG_SOFTWARE_RESET " Software Reset" + #define MSG_MARLIN "Marlin: " + #define MSG_AUTHOR " | Author: " + #define MSG_CONFIGURATION_VER " Last Updated: " + #define MSG_FREE_MEMORY " Free Memory: " + #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: " + #define MSG_OK "ok" + #define MSG_FILE_SAVED "Done saving file." + #define MSG_ERR_LINE_NO "Line Number is not Last Line Number+1, Last Line:" + #define MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line:" + #define MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line:" + #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No Line Number with checksum, Last Line:" + #define MSG_FILE_PRINTED "Done printing file" + #define MSG_BEGIN_FILE_LIST "Begin file list" + #define MSG_END_FILE_LIST "End file list" + #define MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder " + #define MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder " + #define MSG_M218_INVALID_EXTRUDER "M218 Invalid extruder " + #define MSG_ERR_NO_THERMISTORS "No thermistors - no temp" + #define MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder " + #define MSG_HEATING "Heating..." + #define MSG_HEATING_COMPLETE "Heating done." + #define MSG_BED_HEATING "Bed Heating." + #define MSG_BED_DONE "Bed done." + #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n" + #define MSG_COUNT_X " Count X:" + #define MSG_ERR_KILLED "Printer halted. kill() called !!" + #define MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart!" + #define MSG_RESEND "Resend:" + #define MSG_UNKNOWN_COMMAND "Unknown command:\"" + #define MSG_ACTIVE_EXTRUDER "Active Extruder: " + #define MSG_INVALID_EXTRUDER "Invalid extruder" + #define MSG_X_MIN "x_min: " + #define MSG_X_MAX "x_max: " + #define MSG_Y_MIN "y_min: " + #define MSG_Y_MAX "y_max: " + #define MSG_Z_MIN "z_min: " + #define MSG_Z_MAX "z_max: " + #define MSG_M119_REPORT "Reporting endstop status" + #define MSG_ENDSTOP_HIT "TRIGGERED" + #define MSG_ENDSTOP_OPEN "open" + #define MSG_HOTEND_OFFSET "Hotend offsets:" + + #define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir" + #define MSG_SD_INIT_FAIL "SD init fail" + #define MSG_SD_VOL_INIT_FAIL "volume.init failed" + #define MSG_SD_OPENROOT_FAIL "openRoot failed" + #define MSG_SD_CARD_OK "SD card ok" + #define MSG_SD_WORKDIR_FAIL "workDir open failed" + #define MSG_SD_OPEN_FILE_FAIL "open failed, File: " + #define MSG_SD_FILE_OPENED "File opened:" + #define MSG_SD_SIZE " Size:" + #define MSG_SD_FILE_SELECTED "File selected" + #define MSG_SD_WRITE_TO_FILE "Writing to file: " + #define MSG_SD_PRINTING_BYTE "SD printing byte " + #define MSG_SD_NOT_PRINTING "Not SD printing" + #define MSG_SD_ERR_WRITE_TO_FILE "error writing to file" + #define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir:" + + #define MSG_STEPPER_TOO_HIGH "Steprate too high : " + #define MSG_ENDSTOPS_HIT "endstops hit: " + #define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented" + #define MSG_ERR_LONG_EXTRUDE_STOP " too long extrusion prevented" + +#endif + + +#if LANGUAGE_CHOICE == 5 + +// LCD Menu Messages +#define WELCOME_MSG MACHINE_NAME "Lista." +#define MSG_SD_INSERTED "Tarjeta SD Colocada" +#define MSG_SD_REMOVED "Tarjeta SD Retirada" +#define MSG_MAIN "Menu Principal" +#define MSG_AUTOSTART " Autostart" +#define MSG_DISABLE_STEPPERS "Apagar Motores" +#define MSG_AUTO_HOME "Llevar al Origen" // "Llevar Ejes al Cero" +#define MSG_SET_ORIGIN "Establecer Cero" +#define MSG_PREHEAT_PLA "Precalentar PLA" +#define MSG_PREHEAT_PLA_SETTINGS "Ajustar temp. PLA" +#define MSG_PREHEAT_ABS "Precalentar ABS" +#define MSG_PREHEAT_ABS_SETTINGS "Ajustar temp. ABS" +#define MSG_COOLDOWN "Enfriar" +#define MSG_SWITCH_PS_ON "Switch Power On" +#define MSG_SWITCH_PS_OFF "Switch Power Off" +#define MSG_EXTRUDE "Extruir" +#define MSG_RETRACT "Retraer" +#define MSG_MOVE_AXIS "Mover Ejes" +#define MSG_SPEED "Velocidad" +#define MSG_NOZZLE "Nozzle" +#define MSG_NOZZLE1 "Nozzle2" +#define MSG_NOZZLE2 "Nozzle3" +#define MSG_BED "Base" +#define MSG_FAN_SPEED "Ventilador" +#define MSG_FLOW "Flujo" +#define MSG_CONTROL "Control" +#define MSG_MIN "\002 Min" +#define MSG_MAX "\002 Max" +#define MSG_FACTOR "\002 Fact" +#define MSG_AUTOTEMP "Autotemp" +#define MSG_ON "On" +#define MSG_OFF "Off" +#define MSG_PID_P "PID-P" +#define MSG_PID_I "PID-I" +#define MSG_PID_D "PID-D" +#define MSG_PID_C "PID-C" +#define MSG_ACC "Acel" +#define MSG_VXY_JERK "Vxy-jerk" +#define MSG_VZ_JERK "Vz-jerk" +#define MSG_VE_JERK "Ve-jerk" +#define MSG_VMAX "Vmax" +#define MSG_X "x" +#define MSG_Y "y" +#define MSG_Z "z" +#define MSG_E "e" +#define MSG_VMIN "Vmin" +#define MSG_VTRAV_MIN "VTrav min" +#define MSG_AMAX "Amax" +#define MSG_A_RETRACT "A-retrac." +#define MSG_XSTEPS "X pasos/mm" +#define MSG_YSTEPS "Y pasos/mm" +#define MSG_ZSTEPS "Z pasos/mm" +#define MSG_ESTEPS "E pasos/mm" +#define MSG_RECTRACT "Retraer" +#define MSG_TEMPERATURE "Temperatura" +#define MSG_MOTION "Movimiento" +#define MSG_STORE_EPROM "Guardar Memoria" +#define MSG_LOAD_EPROM "Cargar Memoria" +#define MSG_RESTORE_FAILSAFE "Rest. de emergencia" +#define MSG_REFRESH "Volver a cargar" +#define MSG_WATCH "Monitorizar" +#define MSG_PREPARE "Preparar" +#define MSG_TUNE "Ajustar" +#define MSG_PAUSE_PRINT "Pausar Impresion" +#define MSG_RESUME_PRINT "Reanudar Impresion" +#define MSG_STOP_PRINT "Detener Impresion" +#define MSG_CARD_MENU "Menu de SD" +#define MSG_NO_CARD "No hay Tarjeta SD" +#define MSG_DWELL "Reposo..." +#define MSG_USERWAIT "Esperando Ordenes..." +#define MSG_RESUMING "Resumiendo Impresion" +#define MSG_NO_MOVE "Sin movimiento" +#define MSG_KILLED "PARADA DE EMERGENCIA. " +#define MSG_STOPPED "PARADA." +#define MSG_CONTROL_RETRACT "Retraer mm" +#define MSG_CONTROL_RETRACTF "Retraer F" +#define MSG_CONTROL_RETRACT_ZLIFT "Levantar mm" +#define MSG_CONTROL_RETRACT_RECOVER "DesRet +mm" +#define MSG_CONTROL_RETRACT_RECOVERF "DesRet F" +#define MSG_AUTORETRACT "AutoRetr." +#define MSG_FILAMENTCHANGE "Change filament" +#define MSG_INIT_SDCARD "Iniciando. Tarjeta-SD" +#define MSG_CNG_SDCARD "Cambiar Tarjeta-SD" +#define MSG_RECTRACT_WIDE "Retraer" +#define MSG_TEMPERATURE_WIDE "Temperatura" +#define MSG_TEMPERATURE_RTN "Temperatura" +#define MSG_MAIN_WIDE "Menu Principal" +#define MSG_MOTION_WIDE "Movimiento" +#define MSG_PREPARE_ALT "Preparar" +#define MSG_CONTROL_ARROW "Control" +#define MSG_RETRACT_ARROW "Retraer" +#define MSG_PART_RELEASE "Desacople Parcial" +#define MSG_STEPPER_RELEASED "Desacoplada." + +// Serial Console Messages + +#define MSG_Enqueing "En cola \"" +#define MSG_POWERUP "PowerUp" +#define MSG_EXTERNAL_RESET " Reset Externo" +#define MSG_BROWNOUT_RESET " Reset por Voltaje Incorrecto" +#define MSG_WATCHDOG_RESET " Reset por Bloqueo" +#define MSG_SOFTWARE_RESET " Reset por Software" +#define MSG_MARLIN "Marlin " +#define MSG_AUTHOR " | Autor: " +#define MSG_CONFIGURATION_VER " Ultima actualizacion: " +#define MSG_FREE_MEMORY " Memoria libre: " +#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: " +#define MSG_OK "ok" +#define MSG_FILE_SAVED "Guardado." +#define MSG_ERR_LINE_NO "El Numero de Linea no es igual al Ultimo Numero de Linea+1, Ultima Linea:" +#define MSG_ERR_CHECKSUM_MISMATCH "el checksum no coincide, Ultima Linea:" +#define MSG_ERR_NO_CHECKSUM "No se pudo hallar el Checksum con el numero de linea, Ultima Linea:" +#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No se hallo el Numero de Linea con el Checksum, Ultima Linea:" +#define MSG_FILE_PRINTED "Impresion terminada" +#define MSG_BEGIN_FILE_LIST "Comienzo de la lista de archivos" +#define MSG_END_FILE_LIST "Fin de la lista de archivos" +#define MSG_M104_INVALID_EXTRUDER "M104 Extrusor Invalido " +#define MSG_M105_INVALID_EXTRUDER "M105 Extrusor Invalido " +#define MSG_M218_INVALID_EXTRUDER "M218 Extrusor Invalido " +#define MSG_ERR_NO_THERMISTORS "No hay termistores - no temp" +#define MSG_M109_INVALID_EXTRUDER "M109 Extrusor Invalido " +#define MSG_HEATING "Calentando..." +#define MSG_HEATING_COMPLETE "Calentamiento Hecho." +#define MSG_BED_HEATING "Calentando la base." +#define MSG_BED_DONE "Base Caliente." +#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n" +#define MSG_COUNT_X " Cuenta X:" +#define MSG_ERR_KILLED "¡¡Impresora Parada con kill()!!" +#define MSG_ERR_STOPPED "¡Impresora parada por errores. Arregle el error y use M999 Para reiniciar!. (La temperatura se reestablece. Ajustela antes de continuar)" +#define MSG_RESEND "Reenviar:" +#define MSG_UNKNOWN_COMMAND "Comando Desconocido:\"" +#define MSG_ACTIVE_EXTRUDER "Extrusor Activo: " +#define MSG_INVALID_EXTRUDER "Extrusor Invalido" +#define MSG_X_MIN "x_min: " +#define MSG_X_MAX "x_max: " +#define MSG_Y_MIN "y_min: " +#define MSG_Y_MAX "y_max: " +#define MSG_Z_MIN "z_min: " +#define MSG_Z_MAX "z_max: " +#define MSG_M119_REPORT "Comprobando fines de carrera." +#define MSG_ENDSTOP_HIT "PULSADO" +#define MSG_ENDSTOP_OPEN "abierto" +#define MSG_HOTEND_OFFSET "Hotend offsets:" +#define MSG_SD_CANT_OPEN_SUBDIR "No se pudo abrir la subcarpeta." +#define MSG_SD_INIT_FAIL "Fallo al iniciar la SD" +#define MSG_SD_VOL_INIT_FAIL "Fallo al montar el volumen" +#define MSG_SD_OPENROOT_FAIL "Fallo al abrir la carpeta raiz" +#define MSG_SD_CARD_OK "Tarjeta SD OK" +#define MSG_SD_WORKDIR_FAIL "Fallo al abrir la carpeta de trabajo" +#define MSG_SD_OPEN_FILE_FAIL "Error al abrir, Archivo: " +#define MSG_SD_FILE_OPENED "Archivo abierto:" +#define MSG_SD_SIZE " Tamaño:" +#define MSG_SD_FILE_SELECTED "Archivo Seleccionado" +#define MSG_SD_WRITE_TO_FILE "Escribiendo en el archivo: " +#define MSG_SD_PRINTING_BYTE "SD imprimiendo el byte " +#define MSG_SD_NOT_PRINTING "No se esta imprimiendo con SD" +#define MSG_SD_ERR_WRITE_TO_FILE "Error al escribir en el archivo" +#define MSG_SD_CANT_ENTER_SUBDIR "No se puede abrir la carpeta:" + +#define MSG_STEPPER_TOO_HIGH "Steprate demasiado alto : " +#define MSG_ENDSTOPS_HIT "Se ha tocado el fin de carril: " +#define MSG_ERR_COLD_EXTRUDE_STOP " extrusion fria evitada" +#define MSG_ERR_LONG_EXTRUDE_STOP " extrusion demasiado larga evitada" + +#endif + +#if LANGUAGE_CHOICE == 6 + +// LCD Menu Messages +#define WELCOME_MSG MACHINE_NAME " Готов" +#define MSG_SD_INSERTED "Карта вставлена" +#define MSG_SD_REMOVED "Карта извлечена" +#define MSG_MAIN " Меню \003" +#define MSG_AUTOSTART " Автостарт " +#define MSG_DISABLE_STEPPERS " Выключить двигатели" +#define MSG_AUTO_HOME " Парковка " +#define MSG_SET_ORIGIN " Запомнить ноль " +#define MSG_PREHEAT_PLA " Преднагрев PLA " +#define MSG_PREHEAT_PLA_SETTINGS " Настр. преднагр.PLA" +#define MSG_PREHEAT_ABS " Преднагрев ABS " +#define MSG_PREHEAT_ABS_SETTINGS " Настр. преднагр.ABS" +#define MSG_COOLDOWN " Охлаждение " +#define MSG_SWITCH_PS_ON "Switch Power On" +#define MSG_SWITCH_PS_OFF "Switch Power Off" +#define MSG_EXTRUDE " Экструзия " +#define MSG_RETRACT " Откат" +#define MSG_MOVE_AXIS " Движение по осям \x7E" +#define MSG_SPEED " Скорость:" +#define MSG_NOZZLE " \002 Фильера:" +#define MSG_NOZZLE1 " \002 Фильера2:" +#define MSG_NOZZLE2 " \002 Фильера3:" +#define MSG_BED " \002 Кровать:" +#define MSG_FAN_SPEED " Куллер:" +#define MSG_FLOW " Поток:" +#define MSG_CONTROL " Настройки \003" +#define MSG_MIN " \002 Минимум:" +#define MSG_MAX " \002 Максимум:" +#define MSG_FACTOR " \002 Фактор:" +#define MSG_AUTOTEMP " Autotemp:" +#define MSG_ON "Вкл. " +#define MSG_OFF "Выкл. " +#define MSG_PID_P " PID-P: " +#define MSG_PID_I " PID-I: " +#define MSG_PID_D " PID-D: " +#define MSG_PID_C " PID-C: " +#define MSG_ACC " Acc:" +#define MSG_VXY_JERK " Vxy-jerk: " +#define MSG_VZ_JERK "Vz-jerk" +#define MSG_VE_JERK "Ve-jerk" +#define MSG_VMAX " Vmax " +#define MSG_X "x:" +#define MSG_Y "y:" +#define MSG_Z "z:" +#define MSG_E "e:" +#define MSG_VMIN " Vmin:" +#define MSG_VTRAV_MIN " VTrav min:" +#define MSG_AMAX " Amax " +#define MSG_A_RETRACT " A-retract:" +#define MSG_XSTEPS " X шаг/mm:" +#define MSG_YSTEPS " Y шаг/mm:" +#define MSG_ZSTEPS " Z шаг/mm:" +#define MSG_ESTEPS " E шаг/mm:" +#define MSG_RECTRACT " Откат подачи \x7E" +#define MSG_TEMPERATURE " Температура \x7E" +#define MSG_MOTION " Скорости \x7E" + #define MSG_CONTRAST "LCD contrast" +#define MSG_STORE_EPROM " Сохранить настройки" +#define MSG_LOAD_EPROM " Загрузить настройки" +#define MSG_RESTORE_FAILSAFE " Сброс настроек " +#define MSG_REFRESH "\004Обновить " +#define MSG_WATCH " Обзор \003" +#define MSG_PREPARE " Действия \x7E" +#define MSG_TUNE " Настройки \x7E" +#define MSG_PAUSE_PRINT " Пауза печати \x7E" +#define MSG_RESUME_PRINT " Продолжить печать \x7E" +#define MSG_STOP_PRINT " Остановить печать \x7E" +#define MSG_CARD_MENU " Меню карты \x7E" +#define MSG_NO_CARD " Нет карты" +#define MSG_DWELL "Сон..." +#define MSG_USERWAIT "Нажмите для продолж." +#define MSG_NO_MOVE "Нет движения. " +#define MSG_PART_RELEASE " Извлечение принта " +#define MSG_KILLED "УБИТО. " +#define MSG_STOPPED "ОСТАНОВЛЕНО. " +#define MSG_CONTROL_RETRACT " Откат mm:" +#define MSG_CONTROL_RETRACTF " Откат F:" +#define MSG_CONTROL_RETRACT_ZLIFT " Прыжок mm:" +#define MSG_CONTROL_RETRACT_RECOVER " Возврат +mm:" +#define MSG_CONTROL_RETRACT_RECOVERF " Возврат F:" +#define MSG_AUTORETRACT " АвтоОткат:" +#define MSG_FILAMENTCHANGE "Change filament" + +// Serial Console Messages + +#define MSG_Enqueing "Запланировано \"" +#define MSG_POWERUP "Включение питания" +#define MSG_EXTERNAL_RESET " Внешний сброс" +#define MSG_BROWNOUT_RESET " Brown out сброс" +#define MSG_WATCHDOG_RESET " Watchdog сброс" +#define MSG_SOFTWARE_RESET " программный сброс" +#define MSG_MARLIN "Marlin " +#define MSG_AUTHOR " | Автор: " +#define MSG_CONFIGURATION_VER " Последнее обновление: " +#define MSG_FREE_MEMORY " Памяти свободно: " +#define MSG_PLANNER_BUFFER_BYTES " Буффер очереди команд Bytes: " +#define MSG_OK "ok" +#define MSG_FILE_SAVED "Файл записан." +#define MSG_ERR_LINE_NO "Номен строки это не последняя строка+1, последняя строка:" +#define MSG_ERR_CHECKSUM_MISMATCH "контрольная сумма не совпадает, последняя строка:" +#define MSG_ERR_NO_CHECKSUM "нет контрольной суммы для строки, последняя строка:" +#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "нет строки для контрольной суммы, последняя строка:" +#define MSG_FILE_PRINTED "Печать файла завершена" +#define MSG_BEGIN_FILE_LIST "Список файлов" +#define MSG_END_FILE_LIST "Конец списка файлов" +#define MSG_M104_INVALID_EXTRUDER "M104 ошибка экструдера " +#define MSG_M105_INVALID_EXTRUDER "M105 ошибка экструдера " +#define MSG_M218_INVALID_EXTRUDER "M218 ошибка экструдера " +#define MSG_ERR_NO_THERMISTORS "Нет термистра - нет температуры" +#define MSG_M109_INVALID_EXTRUDER "M109 ошибка экструдера " +#define MSG_HEATING "Нагрев... " +#define MSG_HEATING_COMPLETE "Наргето. " +#define MSG_BED_HEATING "Нагрев стола... " +#define MSG_BED_DONE "Стол нагрет. " +#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n" +#define MSG_COUNT_X " Count X:" +#define MSG_ERR_KILLED "Принтер остановлен. вызов kill() !!" +#define MSG_ERR_STOPPED "Ошибка принтера, останов. Устраните неисправность и используйте M999 для перезагрузки!. (Температура недоступна. Проверьте датчики)" +#define MSG_RESEND "Переотправка:" +#define MSG_UNKNOWN_COMMAND "Неизвестная команда:\"" +#define MSG_ACTIVE_EXTRUDER "Активный экструдер: " +#define MSG_INVALID_EXTRUDER "Ошибка экструдера" +#define MSG_X_MIN "x_min:" +#define MSG_X_MAX "x_max:" +#define MSG_Y_MIN "y_min:" +#define MSG_Y_MAX "y_max:" +#define MSG_Z_MIN "z_min:" +#define MSG_Z_MAX "z_max:" +#define MSG_M119_REPORT "Статус концевиков" +#define MSG_ENDSTOP_HIT "Срабатывание концевика" +#define MSG_ENDSTOP_OPEN "Концевик освобожден" +#define MSG_HOTEND_OFFSET "Hotend offsets:" +#define MSG_SD_CANT_OPEN_SUBDIR "Не открыть папку" +#define MSG_SD_INIT_FAIL "Ошибка инициализации SD" +#define MSG_SD_VOL_INIT_FAIL "Ошибка инициализации раздела" +#define MSG_SD_OPENROOT_FAIL "Не прочесть содержимое корня" +#define MSG_SD_CARD_OK "SD карта в порядке" +#define MSG_SD_WORKDIR_FAIL "не открыть рабочую папку" +#define MSG_SD_OPEN_FILE_FAIL "Ошибка чтения, файл: " +#define MSG_SD_FILE_OPENED "Файл открыт:" +#define MSG_SD_SIZE " Размер:" +#define MSG_SD_FILE_SELECTED "Файл выбран" +#define MSG_SD_WRITE_TO_FILE "Запись в файл: " +#define MSG_SD_PRINTING_BYTE "SD печать byte " +#define MSG_SD_NOT_PRINTING "нет SD печати" +#define MSG_SD_ERR_WRITE_TO_FILE "ошибка записи в файл" +#define MSG_SD_CANT_ENTER_SUBDIR "Не зайти в папку:" +#define MSG_STEPPER_TOO_HIGH "Частота шагов очень высока : " +#define MSG_ENDSTOPS_HIT "концевик сработал: " +#define MSG_ERR_COLD_EXTRUDE_STOP " защита холодной экструзии" +#define MSG_ERR_LONG_EXTRUDE_STOP " защита превышения длинны экструзии" + +#endif + + +#if LANGUAGE_CHOICE == 7 + + // LCD Menu Messages + #define WELCOME_MSG MACHINE_NAME " Pronta" + #define MSG_SD_INSERTED "SD Card inserita" + #define MSG_SD_REMOVED "SD Card rimossa" + #define MSG_MAIN "Menu principale" + #define MSG_AUTOSTART "Autostart" + #define MSG_DISABLE_STEPPERS "Disabilita Motori" + #define MSG_AUTO_HOME "Auto Home" + #define MSG_SET_ORIGIN "Imposta Origine" + #define MSG_PREHEAT_PLA "Preriscalda PLA" + #define MSG_PREHEAT_PLA_SETTINGS "Preris. PLA Conf" + #define MSG_PREHEAT_ABS "Preriscalda ABS" #define MSG_PREHEAT_ABS_SETTINGS "Preris. ABS Conf" - #define MSG_COOLDOWN "Raffredda" - #define MSG_SWITCH_PS_ON "Switch Power On" + #define MSG_COOLDOWN "Raffredda" + #define MSG_SWITCH_PS_ON "Switch Power On" #define MSG_SWITCH_PS_OFF "Switch Power Off" - #define MSG_EXTRUDE "Estrudi" - #define MSG_RETRACT "Ritrai" - #define MSG_MOVE_AXIS "Muovi Asse" - #define MSG_SPEED "Velcità" - #define MSG_NOZZLE "Ugello" - #define MSG_NOZZLE1 "Ugello2" - #define MSG_NOZZLE2 "Ugello3" - #define MSG_BED "Piatto" - #define MSG_FAN_SPEED "Ventola" - #define MSG_FLOW "Flusso" - #define MSG_CONTROL "Controllo" - #define MSG_MIN " \002 Min:" - #define MSG_MAX " \002 Max:" - #define MSG_FACTOR " \002 Fact:" - #define MSG_AUTOTEMP "Autotemp" - #define MSG_ON "On " - #define MSG_OFF "Off" - #define MSG_PID_P "PID-P" - #define MSG_PID_I "PID-I" - #define MSG_PID_D "PID-D" - #define MSG_PID_C "PID-C" - #define MSG_ACC "Accel" - #define MSG_VXY_JERK "Vxy-jerk" - #define MSG_VZ_JERK "Vz-jerk" - #define MSG_VE_JERK "Ve-jerk" - #define MSG_VMAX "Vmax" - #define MSG_X "x" - #define MSG_Y "y" - #define MSG_Z "z" - #define MSG_E "e" - #define MSG_VMIN "Vmin" - #define MSG_VTRAV_MIN "VTrav min" - #define MSG_AMAX "Amax" - #define MSG_A_RETRACT "A-retract" - #define MSG_XSTEPS "Xpassi/mm" - #define MSG_YSTEPS "Ypassi/mm" - #define MSG_ZSTEPS "Zpassi/mm" - #define MSG_ESTEPS "Epassi/mm" - #define MSG_RECTRACT "Ritrai" - #define MSG_TEMPERATURE "Temperatura" - #define MSG_MOTION "Movimento" - #define MSG_CONTRAST "LCD contrast" - #define MSG_STORE_EPROM "Salva in EEPROM" - #define MSG_LOAD_EPROM "Carica da EEPROM" - #define MSG_RESTORE_FAILSAFE "Impostaz. default" - #define MSG_REFRESH "Aggiorna" - #define MSG_WATCH "Guarda" - #define MSG_PREPARE "Prepara" - #define MSG_TUNE "Adatta" - #define MSG_PAUSE_PRINT "Pausa" - #define MSG_RESUME_PRINT "Riprendi Stampa" - #define MSG_STOP_PRINT "Arresta Stampa" - #define MSG_CARD_MENU "SD Card Menu" - #define MSG_NO_CARD "No SD Card" - #define MSG_DWELL "Sospensione..." - #define MSG_USERWAIT "Attendi Utente..." - #define MSG_RESUMING "Riprendi Stampa" - #define MSG_NO_MOVE "Nessun Movimento." - #define MSG_KILLED "UCCISO. " - #define MSG_STOPPED "ARRESTATO. " - #define MSG_CONTROL_RETRACT "Ritrai mm" - #define MSG_CONTROL_RETRACTF "Ritrai F" - #define MSG_CONTROL_RETRACT_ZLIFT "Salta mm" - #define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm" - #define MSG_CONTROL_RETRACT_RECOVERF "UnRet F" - #define MSG_AUTORETRACT "AutoArretramento" - #define MSG_SERIAL_ERROR_MENU_STRUCTURE "Qualcosa non va in MenuStructure." - #define MSG_FILAMENTCHANGE "Cambia filamento" - #define MSG_INIT_SDCARD "Iniz. SD-Card" - #define MSG_CNG_SDCARD "Cambia SD-Card" - - // Serial Console Messages - - #define MSG_Enqueing "accodamento \"" - #define MSG_POWERUP "Accensione" - #define MSG_EXTERNAL_RESET " Reset Esterno" - #define MSG_BROWNOUT_RESET " Brown out Reset" - #define MSG_WATCHDOG_RESET " Watchdog Reset" - #define MSG_SOFTWARE_RESET " Software Reset" - #define MSG_MARLIN "Marlin " - #define MSG_AUTHOR " | Autore: " - #define MSG_CONFIGURATION_VER " Ultimo Aggiornamento: " - #define MSG_FREE_MEMORY " Memoria Libera: " - #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: " - #define MSG_OK "ok" - #define MSG_FILE_SAVED "File Salvato." - #define MSG_ERR_LINE_NO "Il Numero della Linea non corrisponde al Numero dell'Ultima Linea+1, Ultima Linea: " - #define MSG_ERR_CHECKSUM_MISMATCH "checksum non corrispondente, Ultima Linea: " - #define MSG_ERR_NO_CHECKSUM "Nessun Checksum con Numero di Linea, Ultima Linea: " - #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Nessun Numero di Linea con Checksum, Ultima Linea: " - #define MSG_FILE_PRINTED "File stampato" - #define MSG_BEGIN_FILE_LIST "Inizio Lista File" - #define MSG_END_FILE_LIST "Fine Lista File" - #define MSG_M104_INVALID_EXTRUDER "M104 Estrusore non valido " - #define MSG_M105_INVALID_EXTRUDER "M105 Estrusore non valido " - #define MSG_M218_INVALID_EXTRUDER "M218 Estrusore non valido " - #define MSG_ERR_NO_THERMISTORS "Nessun Termistore - nessuna temperatura" - #define MSG_M109_INVALID_EXTRUDER "M109 Estrusore non valido " - #define MSG_HEATING "Riscaldamento..." - #define MSG_HEATING_COMPLETE "Stampante Calda." - #define MSG_BED_HEATING "Riscaldamento Piatto." - #define MSG_BED_DONE "Piatto Pronto." - #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n" - #define MSG_COUNT_X " Calcola X: " - #define MSG_ERR_KILLED "Stampante Calda. kill() chiamata !!" - #define MSG_ERR_STOPPED "Stampante fermata a causa di errori. Risolvi l'errore e usa M999 per ripartire!. (Reset temperatura. Impostala prima di ripartire)" - #define MSG_RESEND "Reinviato:" - #define MSG_UNKNOWN_COMMAND "Comando sconosciuto: \"" - #define MSG_ACTIVE_EXTRUDER "Attiva Estrusore: " - #define MSG_INVALID_EXTRUDER "Estrusore non valido" - #define MSG_X_MIN "x_min: " - #define MSG_X_MAX "x_max: " - #define MSG_Y_MIN "y_min: " - #define MSG_Y_MAX "y_max: " - #define MSG_Z_MIN "z_min: " - #define MSG_Z_MAX "z_max: " - #define MSG_M119_REPORT "Segnalazione stato degli endstop" - #define MSG_ENDSTOP_HIT "INNESCATO" - #define MSG_ENDSTOP_OPEN "aperto" - #define MSG_HOTEND_OFFSET "Hotend offsets:" - - #define MSG_SD_CANT_OPEN_SUBDIR "Impossibile aprire sottocartella" - #define MSG_SD_INIT_FAIL "Fallita Inizializzazione SD" - #define MSG_SD_VOL_INIT_FAIL "Fallito il montaggio del Volume" - #define MSG_SD_OPENROOT_FAIL "Fallita l'apertura Cartella Principale" - #define MSG_SD_CARD_OK "SD card ok" - #define MSG_SD_WORKDIR_FAIL "Fallita l'apertura Cartella di Lavoro" - #define MSG_SD_OPEN_FILE_FAIL "Fallita l'apertura del File: " - #define MSG_SD_FILE_OPENED "File aperto: " - #define MSG_SD_SIZE " Dimensione: " - #define MSG_SD_FILE_SELECTED "File selezionato" - #define MSG_SD_WRITE_TO_FILE "Scrittura su file: " - #define MSG_SD_PRINTING_BYTE "Si sta scrivendo il byte su SD " - #define MSG_SD_NOT_PRINTING "Non si sta scrivendo su SD" - #define MSG_SD_ERR_WRITE_TO_FILE "Errore nella scrittura su file" - #define MSG_SD_CANT_ENTER_SUBDIR "Impossibile entrare nella sottocartella: " - - #define MSG_STEPPER_TOO_HIGH "Steprate troppo alto: " - #define MSG_ENDSTOPS_HIT "Raggiunto il fondo carrello: " - #define MSG_ERR_COLD_EXTRUDE_STOP " prevenuta estrusione fredda" - #define MSG_ERR_LONG_EXTRUDE_STOP " prevenuta estrusione troppo lunga" - -#endif - - -#if LANGUAGE_CHOICE == 8 - -// LCD Menu Messages - #define WELCOME_MSG MACHINE_NAME " Pronta." - #define MSG_SD_INSERTED "Cartao SD inserido" - #define MSG_SD_REMOVED "Cartao SD removido" - #define MSG_MAIN " Menu Principal \003" - #define MSG_AUTOSTART " Autostart" - #define MSG_DISABLE_STEPPERS " Apagar Motores" - #define MSG_AUTO_HOME " Ir para Origen" - #define MSG_SET_ORIGIN " Estabelecer Origen" - #define MSG_PREHEAT_PLA " pre-aquecer PLA" - #define MSG_PREHEAT_PLA_SETTINGS " pre-aquecer PLA Setting" - #define MSG_PREHEAT_ABS " pre-aquecer ABS" - #define MSG_PREHEAT_ABS_SETTINGS " pre-aquecer ABS Setting" - #define MSG_COOLDOWN " Esfriar" - #define MSG_SWITCH_PS_ON "Switch Power On" - #define MSG_SWITCH_PS_OFF "Switch Power Off" - #define MSG_EXTRUDE " Extrudar" - #define MSG_RETRACT " Retrair" - #define MSG_PREHEAT_PLA " pre-aquecer PLA" - #define MSG_PREHEAT_ABS " pre-aquecer ABS" - #define MSG_MOVE_AXIS " Mover eixo \x7E" - #define MSG_SPEED " Velocidade:" - #define MSG_NOZZLE " \002Nozzle:" - #define MSG_NOZZLE1 " \002Nozzle2:" - #define MSG_NOZZLE2 " \002Nozzle3:" - #define MSG_BED " \002Base:" - #define MSG_FAN_SPEED " Velocidade Ventoinha:" - #define MSG_FLOW " Fluxo:" - #define MSG_CONTROL " Controle \003" - #define MSG_MIN " \002 Min:" - #define MSG_MAX " \002 Max:" - #define MSG_FACTOR " \002 Fact:" - #define MSG_AUTOTEMP " Autotemp:" - #define MSG_ON "On " - #define MSG_OFF "Off" - #define MSG_PID_P " PID-P: " - #define MSG_PID_I " PID-I: " - #define MSG_PID_D " PID-D: " - #define MSG_PID_C " PID-C: " - #define MSG_ACC " Acc:" - #define MSG_VXY_JERK " Vxy-jerk: " - #define MSG_VZ_JERK "Vz-jerk" - #define MSG_VE_JERK "Ve-jerk" - #define MSG_VMAX " Vmax " - #define MSG_X "x:" - #define MSG_Y "y:" - #define MSG_Z "z:" - #define MSG_E "e:" - #define MSG_VMIN " Vmin:" - #define MSG_VTRAV_MIN " VTrav min:" - #define MSG_AMAX " Amax " - #define MSG_A_RETRACT " A-retract:" - #define MSG_XSTEPS " Xpasso/mm:" - #define MSG_YSTEPS " Ypasso/mm:" - #define MSG_ZSTEPS " Zpasso/mm:" - #define MSG_ESTEPS " Epasso/mm:" - #define MSG_MAIN_WIDE " Menu Principal \003" - #define MSG_RECTRACT_WIDE " Retrair \x7E" - #define MSG_TEMPERATURE_WIDE " Temperatura \x7E" - #define MSG_TEMPERATURE_RTN " Temperatura \003" - #define MSG_MOTION_WIDE " Movimento \x7E" - #define MSG_STORE_EPROM " Guardar memoria" - #define MSG_LOAD_EPROM " Carregar memoria" - #define MSG_RESTORE_FAILSAFE " Rest. de emergencia" - #define MSG_REFRESH "\004Recarregar" - #define MSG_WATCH " Monitorar \003" - #define MSG_PREPARE " Preparar \x7E" - #define MSG_PREPARE_ALT " Preparar \003" - #define MSG_CONTROL_ARROW " Controle \x7E" - #define MSG_RETRACT_ARROW " Retrair \x7E" - #define MSG_TUNE " Tune \x7E" - #define MSG_PAUSE_PRINT " Pausar Impressao \x7E" - #define MSG_RESUME_PRINT " Resumir Impressao \x7E" - #define MSG_STOP_PRINT " Parar Impressao \x7E" - #define MSG_CARD_MENU " Menu cartao SD \x7E" - #define MSG_NO_CARD " Sem cartao SD" - #define MSG_DWELL "Repouso..." - #define MSG_USERWAIT "Esperando Ordem..." - #define MSG_NO_MOVE "Sem movimento." - #define MSG_PART_RELEASE "Lancamento Parcial" - #define MSG_KILLED "PARADA DE EMERGENCIA. " - #define MSG_STOPPED "PARADA. " - #define MSG_STEPPER_RELEASED "Lancado." - #define MSG_CONTROL_RETRACT " Retrair mm:" - #define MSG_CONTROL_RETRACTF " Retrair F:" - #define MSG_CONTROL_RETRACT_ZLIFT " Levantar mm:" - #define MSG_CONTROL_RETRACT_RECOVER " DesRet +mm:" - #define MSG_CONTROL_RETRACT_RECOVERF " DesRet F:" - #define MSG_AUTORETRACT " AutoRetr.:" - #define MSG_SERIAL_ERROR_MENU_STRUCTURE "Algo esta errado na estrutura do Menu." - #define MSG_FILAMENTCHANGE "Change filament" - -// Serial Console Messages - - #define MSG_Enqueing "enqueing \"" - #define MSG_POWERUP "PowerUp" - #define MSG_EXTERNAL_RESET " Reset Externo" - #define MSG_BROWNOUT_RESET " Reset por voltagem incorreta" - #define MSG_WATCHDOG_RESET " Reset por Bloqueio" - #define MSG_SOFTWARE_RESET " Reset por Software" - #define MSG_MARLIN "Marlin " - #define MSG_AUTHOR " | Author: " - #define MSG_CONFIGURATION_VER " Ultima atualizacao: " - #define MSG_FREE_MEMORY " memoria Livre: " - #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: " - #define MSG_OK "ok" - #define MSG_FILE_SAVED "Guardado." - #define MSG_ERR_LINE_NO "O Numero da linha Nao e igual ao ultimo Numero da linha+1, Ultima linha:" - #define MSG_ERR_CHECKSUM_MISMATCH "O checksum Nao coincide, Ultima linha:" - #define MSG_ERR_NO_CHECKSUM "Nao foi possivel encontrar o checksum com o numero da linha, Ultima linha :" - #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Nao ha o numero da linha com o checksum, Ultima linha:" - #define MSG_FILE_PRINTED "Impressao terminada" - #define MSG_BEGIN_FILE_LIST "Começo da lista de arquivos" - #define MSG_END_FILE_LIST "Fim da lista de arquivos" - #define MSG_M104_INVALID_EXTRUDER "M104 Extrusor inválido " - #define MSG_M105_INVALID_EXTRUDER "M105 Extrusor inválido " - #define MSG_M218_INVALID_EXTRUDER "M218 Extrusor inválido " - #define MSG_ERR_NO_THERMISTORS "Nao ha termistor - no temp" - #define MSG_M109_INVALID_EXTRUDER "M109 Extrusor inválido " - #define MSG_HEATING "Aquecendo..." - #define MSG_HEATING_COMPLETE "Aquecido." - #define MSG_BED_HEATING "Aquecendo a Base." - #define MSG_BED_DONE "Base quente." - #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n" - #define MSG_COUNT_X " Conta X:" - #define MSG_ERR_KILLED "Impressora parada com kill() !!" - #define MSG_ERR_STOPPED "Impressora parada por erros. Coserte o erro e use M999 para recomeçar!. (Temperatura reiniciada. Ajuste antes de recomeçar)" - #define MSG_RESEND "Reenviar:" - #define MSG_UNKNOWN_COMMAND "Comando desconhecido:\"" - #define MSG_ACTIVE_EXTRUDER "Extrusor ativo: " - #define MSG_INVALID_EXTRUDER "Extrusor invalido" - #define MSG_X_MIN "x_min: " - #define MSG_X_MAX "x_max: " - #define MSG_Y_MIN "y_min: " - #define MSG_Y_MAX "y_max: " - #define MSG_Z_MIN "z_min: " - #define MSG_Z_MAX "z_max: " - #define MSG_M119_REPORT "Relatando estado do ponto final" - #define MSG_ENDSTOP_HIT "PULSADO" - #define MSG_ENDSTOP_OPEN "Aberto" - #define MSG_HOTEND_OFFSET "Hotend offsets:" - - #define MSG_SD_CANT_OPEN_SUBDIR "Nao pode abrir sub diretorio" - #define MSG_SD_INIT_FAIL "Falha ao iniciar SD" - #define MSG_SD_VOL_INIT_FAIL "Falha ao montar volume" - #define MSG_SD_OPENROOT_FAIL "Falha ao abrir diretorio raiz" - #define MSG_SD_CARD_OK "cartao SD ok" - #define MSG_SD_WORKDIR_FAIL "Falha ao abrir diretorio de trabalho" - #define MSG_SD_OPEN_FILE_FAIL "Erro ao abrir, Arquivo: " - #define MSG_SD_FILE_OPENED "Arquivo aberto:" - #define MSG_SD_SIZE " Size:" - #define MSG_SD_FILE_SELECTED "Arquivo selecionado" - #define MSG_SD_WRITE_TO_FILE "Escrevendo no arquivo: " - #define MSG_SD_PRINTING_BYTE "SD imprimindo o byte " - #define MSG_SD_NOT_PRINTING "Nao esta se imprimindo com o SD" - #define MSG_SD_ERR_WRITE_TO_FILE "Erro ao escrever no arquivo" - #define MSG_SD_CANT_ENTER_SUBDIR "Nao pode abrir o sub diretorio:" - - #define MSG_STEPPER_TOO_HIGH "Steprate muito alto : " - #define MSG_ENDSTOPS_HIT "O ponto final foi tocado: " - #define MSG_ERR_COLD_EXTRUDE_STOP " Extrusao a frio evitada" - #define MSG_ERR_LONG_EXTRUDE_STOP " Extrusao muito larga evitada" - - -#endif - - - -#if LANGUAGE_CHOICE == 9 - -// Finnish - -// LCD Menu Messages - #define WELCOME_MSG MACHINE_NAME " valmis" - #define MSG_SD_INSERTED "Kortti asetettu" - #define MSG_SD_REMOVED "Kortti poistettu" - #define MSG_MAIN "Palaa" - #define MSG_AUTOSTART "Automaatti" - #define MSG_DISABLE_STEPPERS "Vapauta moottorit" - #define MSG_AUTO_HOME "Aja referenssiin" - #define MSG_SET_ORIGIN "Aseta origo" - #define MSG_PREHEAT_PLA "Esilammita PLA" - #define MSG_PREHEAT_PLA_SETTINGS "Esilammita PLA konf" - #define MSG_PREHEAT_ABS "Esilammita ABS" - #define MSG_PREHEAT_ABS_SETTINGS "Esilammita ABS konf" - #define MSG_COOLDOWN "Jaahdyta" - #define MSG_SWITCH_PS_ON "Switch Power On" - #define MSG_SWITCH_PS_OFF "Switch Power Off" - #define MSG_EXTRUDE "Pursota" - #define MSG_RETRACT "Veda takaisin" - #define MSG_MOVE_AXIS "Liikuta akseleita" - #define MSG_SPEED "Nopeus" - #define MSG_NOZZLE "Suutin" - #define MSG_NOZZLE1 "Suutin2" - #define MSG_NOZZLE2 "Suutin3" - #define MSG_BED "Alusta" - #define MSG_FAN_SPEED "Tuul. nopeus" - #define MSG_FLOW "Virtaus" - #define MSG_CONTROL "Kontrolli" - #define MSG_MIN " \002 Min" - #define MSG_MAX " \002 Max" - #define MSG_FACTOR " \002 Kerr" - #define MSG_AUTOTEMP "Autotemp" - #define MSG_ON "On " - #define MSG_OFF "Off" - #define MSG_PID_P "PID-P" - #define MSG_PID_I "PID-I" - #define MSG_PID_D "PID-D" - #define MSG_PID_C "PID-C" - #define MSG_ACC "Kiihtyv" - #define MSG_VXY_JERK "Vxy-jerk" - #define MSG_VZ_JERK "Vz-jerk" - #define MSG_VE_JERK "Ve-jerk" - #define MSG_VMAX "Vmax " - #define MSG_X "x" - #define MSG_Y "y" - #define MSG_Z "z" - #define MSG_E "e" - #define MSG_VMIN "Vmin" - #define MSG_VTRAV_MIN "VLiike min" - #define MSG_AMAX "Amax " - #define MSG_A_RETRACT "A-peruuta" - #define MSG_XSTEPS "Xsteps/mm" - #define MSG_YSTEPS "Ysteps/mm" - #define MSG_ZSTEPS "Zsteps/mm" - #define MSG_ESTEPS "Esteps/mm" - #define MSG_RECTRACT "Veda takaisin" - #define MSG_TEMPERATURE "Lampotila" - #define MSG_MOTION "Liike" - #define MSG_CONTRAST "LCD contrast" - #define MSG_STORE_EPROM "Tallenna muistiin" - #define MSG_LOAD_EPROM "Lataa muistista" - #define MSG_RESTORE_FAILSAFE "Palauta oletus" - #define MSG_REFRESH "Paivita" - #define MSG_WATCH "Seuraa" - #define MSG_PREPARE "Valmistele" - #define MSG_TUNE "Saada" - #define MSG_PAUSE_PRINT "Keskeyta tulostus" - #define MSG_RESUME_PRINT "Jatka tulostusta" - #define MSG_STOP_PRINT "Pysayta tulostus" - #define MSG_CARD_MENU "Korttivalikko" - #define MSG_NO_CARD "Ei korttia" - #define MSG_DWELL "Nukkumassa..." - #define MSG_USERWAIT "Odotetaan valintaa..." - #define MSG_RESUMING "Jatketaan tulostusta" - #define MSG_NO_MOVE "Ei liiketta." - #define MSG_KILLED "KILLED. " - #define MSG_STOPPED "STOPPED. " - #define MSG_CONTROL_RETRACT "Veda mm" - #define MSG_CONTROL_RETRACTF "Veda F" - #define MSG_CONTROL_RETRACT_ZLIFT "Z mm" - #define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm" - #define MSG_CONTROL_RETRACT_RECOVERF "UnRet F" - #define MSG_AUTORETRACT "AutoVeto." - #define MSG_FILAMENTCHANGE "Change filament" - -// Serial Console Messages - - #define MSG_Enqueing "jonoon \"" - #define MSG_POWERUP "Kaynnistys" - #define MSG_EXTERNAL_RESET " Ulkoinen Reset" - #define MSG_BROWNOUT_RESET " Alajannite Reset" - #define MSG_WATCHDOG_RESET " Vahtikoira Reset" - #define MSG_SOFTWARE_RESET " Ohjelmisto Reset" - #define MSG_MARLIN "Marlin " - #define MSG_AUTHOR " | Author: " - #define MSG_CONFIGURATION_VER " Paivitetty viimeksi: " - #define MSG_FREE_MEMORY " Vapaata muistia: " - #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: " - #define MSG_OK "ok" - #define MSG_FILE_SAVED "Tiedosto tallennettu." - #define MSG_ERR_LINE_NO "Rivinumero ei ole Viimeisin rivi+1, Viimeisin rivi: " - #define MSG_ERR_CHECKSUM_MISMATCH "Tarkistesummassa virhe, Viimeisin rivi: " - #define MSG_ERR_NO_CHECKSUM "Rivilla ei tarkistesummaa, Viimeisin rivi: " - #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Ei rivinumeroa tarkistesumman kanssa, Viimeisin rivi: " - #define MSG_FILE_PRINTED "Tiedoston tulostus valmis" - #define MSG_BEGIN_FILE_LIST "Tiedostolistauksen alku" - #define MSG_END_FILE_LIST "Tiedostolistauksen loppu" - #define MSG_M104_INVALID_EXTRUDER "M104 Virheellinen suutin " - #define MSG_M105_INVALID_EXTRUDER "M105 Virheellinen suutin " - #define MSG_M218_INVALID_EXTRUDER "M218 Virheellinen suutin " - #define MSG_ERR_NO_THERMISTORS "Ei termistoreja - ei lampotiloja" - #define MSG_M109_INVALID_EXTRUDER "M109 Virheellinen suutin " - #define MSG_HEATING "Lammitan..." - #define MSG_HEATING_COMPLETE "Lammitys valmis." - #define MSG_BED_HEATING "Alusta lampiaa." - #define MSG_BED_DONE "Alusta valmis." - #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n" - #define MSG_COUNT_X " Laskuri X: " - #define MSG_ERR_KILLED "Tulostin pysaytetty. kill():ia kutsuttu!" - #define MSG_ERR_STOPPED "Tulostin pysaytetty virheiden vuoksi. Korjaa virheet ja kayta M999 kaynnistaaksesi uudelleen. (Lampotila nollattiin. Aseta lampotila sen jalkeen kun jatkat.)" - #define MSG_RESEND "Uudelleenlahetys: " - #define MSG_UNKNOWN_COMMAND "Tuntematon komento: \"" - #define MSG_ACTIVE_EXTRUDER "Aktiivinen suutin: " - #define MSG_INVALID_EXTRUDER "Virheellinen suutin" - #define MSG_X_MIN "x_min: " - #define MSG_X_MAX "x_max: " - #define MSG_Y_MIN "y_min: " - #define MSG_Y_MAX "y_max: " - #define MSG_Z_MIN "z_min: " - #define MSG_Z_MAX "z_max: " - #define MSG_M119_REPORT "Rajakytkimien tilaraportti" - #define MSG_ENDSTOP_HIT "AKTIIVISENA" - #define MSG_ENDSTOP_OPEN "avoinna" - #define MSG_HOTEND_OFFSET "Hotend offsets:" - - #define MSG_SD_CANT_OPEN_SUBDIR "Alihakemistoa ei voitu avata" - #define MSG_SD_INIT_FAIL "SD alustus epaonnistui" - #define MSG_SD_VOL_INIT_FAIL "volume.init epaonnistui" - #define MSG_SD_OPENROOT_FAIL "openRoot epaonnistui" - #define MSG_SD_CARD_OK "SD kortti ok" - #define MSG_SD_WORKDIR_FAIL "workDir open epaonnistui" - #define MSG_SD_OPEN_FILE_FAIL "avaus epaonnistui, Tiedosto: " - #define MSG_SD_FILE_OPENED "Tiedosto avattu: " - #define MSG_SD_SIZE " Koko: " - #define MSG_SD_FILE_SELECTED "Tiedosto valittu" - #define MSG_SD_WRITE_TO_FILE "Kirjoitetaan tiedostoon: " - #define MSG_SD_PRINTING_BYTE "SD tulostus byte " - #define MSG_SD_NOT_PRINTING "Ei SD tulostus" - #define MSG_SD_ERR_WRITE_TO_FILE "virhe kirjoitettaessa tiedostoon" - #define MSG_SD_CANT_ENTER_SUBDIR "Alihakemistoon ei voitu siirtya: " - - #define MSG_STEPPER_TOO_HIGH "Askellustaajuus liian suuri: " - #define MSG_ENDSTOPS_HIT "paatyrajat aktivoitu: " - #define MSG_ERR_COLD_EXTRUDE_STOP " kylmana pursotus estetty" - #define MSG_ERR_LONG_EXTRUDE_STOP " liian pitka pursotus estetty" - -#endif -#endif // ifndef LANGUAGE_H + #define MSG_EXTRUDE "Estrudi" + #define MSG_RETRACT "Ritrai" + #define MSG_MOVE_AXIS "Muovi Asse" + #define MSG_SPEED "Velcità" + #define MSG_NOZZLE "Ugello" + #define MSG_NOZZLE1 "Ugello2" + #define MSG_NOZZLE2 "Ugello3" + #define MSG_BED "Piatto" + #define MSG_FAN_SPEED "Ventola" + #define MSG_FLOW "Flusso" + #define MSG_CONTROL "Controllo" + #define MSG_MIN " \002 Min:" + #define MSG_MAX " \002 Max:" + #define MSG_FACTOR " \002 Fact:" + #define MSG_AUTOTEMP "Autotemp" + #define MSG_ON "On " + #define MSG_OFF "Off" + #define MSG_PID_P "PID-P" + #define MSG_PID_I "PID-I" + #define MSG_PID_D "PID-D" + #define MSG_PID_C "PID-C" + #define MSG_ACC "Accel" + #define MSG_VXY_JERK "Vxy-jerk" + #define MSG_VZ_JERK "Vz-jerk" + #define MSG_VE_JERK "Ve-jerk" + #define MSG_VMAX "Vmax" + #define MSG_X "x" + #define MSG_Y "y" + #define MSG_Z "z" + #define MSG_E "e" + #define MSG_VMIN "Vmin" + #define MSG_VTRAV_MIN "VTrav min" + #define MSG_AMAX "Amax" + #define MSG_A_RETRACT "A-retract" + #define MSG_XSTEPS "Xpassi/mm" + #define MSG_YSTEPS "Ypassi/mm" + #define MSG_ZSTEPS "Zpassi/mm" + #define MSG_ESTEPS "Epassi/mm" + #define MSG_RECTRACT "Ritrai" + #define MSG_TEMPERATURE "Temperatura" + #define MSG_MOTION "Movimento" + #define MSG_CONTRAST "LCD contrast" + #define MSG_STORE_EPROM "Salva in EEPROM" + #define MSG_LOAD_EPROM "Carica da EEPROM" + #define MSG_RESTORE_FAILSAFE "Impostaz. default" + #define MSG_REFRESH "Aggiorna" + #define MSG_WATCH "Guarda" + #define MSG_PREPARE "Prepara" + #define MSG_TUNE "Adatta" + #define MSG_PAUSE_PRINT "Pausa" + #define MSG_RESUME_PRINT "Riprendi Stampa" + #define MSG_STOP_PRINT "Arresta Stampa" + #define MSG_CARD_MENU "SD Card Menu" + #define MSG_NO_CARD "No SD Card" + #define MSG_DWELL "Sospensione..." + #define MSG_USERWAIT "Attendi Utente..." + #define MSG_RESUMING "Riprendi Stampa" + #define MSG_NO_MOVE "Nessun Movimento." + #define MSG_KILLED "UCCISO. " + #define MSG_STOPPED "ARRESTATO. " + #define MSG_CONTROL_RETRACT "Ritrai mm" + #define MSG_CONTROL_RETRACTF "Ritrai F" + #define MSG_CONTROL_RETRACT_ZLIFT "Salta mm" + #define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm" + #define MSG_CONTROL_RETRACT_RECOVERF "UnRet F" + #define MSG_AUTORETRACT "AutoArretramento" + #define MSG_SERIAL_ERROR_MENU_STRUCTURE "Qualcosa non va in MenuStructure." + #define MSG_FILAMENTCHANGE "Cambia filamento" + #define MSG_INIT_SDCARD "Iniz. SD-Card" + #define MSG_CNG_SDCARD "Cambia SD-Card" + + // Serial Console Messages + + #define MSG_Enqueing "accodamento \"" + #define MSG_POWERUP "Accensione" + #define MSG_EXTERNAL_RESET " Reset Esterno" + #define MSG_BROWNOUT_RESET " Brown out Reset" + #define MSG_WATCHDOG_RESET " Watchdog Reset" + #define MSG_SOFTWARE_RESET " Software Reset" + #define MSG_MARLIN "Marlin " + #define MSG_AUTHOR " | Autore: " + #define MSG_CONFIGURATION_VER " Ultimo Aggiornamento: " + #define MSG_FREE_MEMORY " Memoria Libera: " + #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: " + #define MSG_OK "ok" + #define MSG_FILE_SAVED "File Salvato." + #define MSG_ERR_LINE_NO "Il Numero della Linea non corrisponde al Numero dell'Ultima Linea+1, Ultima Linea: " + #define MSG_ERR_CHECKSUM_MISMATCH "checksum non corrispondente, Ultima Linea: " + #define MSG_ERR_NO_CHECKSUM "Nessun Checksum con Numero di Linea, Ultima Linea: " + #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Nessun Numero di Linea con Checksum, Ultima Linea: " + #define MSG_FILE_PRINTED "File stampato" + #define MSG_BEGIN_FILE_LIST "Inizio Lista File" + #define MSG_END_FILE_LIST "Fine Lista File" + #define MSG_M104_INVALID_EXTRUDER "M104 Estrusore non valido " + #define MSG_M105_INVALID_EXTRUDER "M105 Estrusore non valido " + #define MSG_M218_INVALID_EXTRUDER "M218 Estrusore non valido " + #define MSG_ERR_NO_THERMISTORS "Nessun Termistore - nessuna temperatura" + #define MSG_M109_INVALID_EXTRUDER "M109 Estrusore non valido " + #define MSG_HEATING "Riscaldamento..." + #define MSG_HEATING_COMPLETE "Stampante Calda." + #define MSG_BED_HEATING "Riscaldamento Piatto." + #define MSG_BED_DONE "Piatto Pronto." + #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n" + #define MSG_COUNT_X " Calcola X: " + #define MSG_ERR_KILLED "Stampante Calda. kill() chiamata !!" + #define MSG_ERR_STOPPED "Stampante fermata a causa di errori. Risolvi l'errore e usa M999 per ripartire!. (Reset temperatura. Impostala prima di ripartire)" + #define MSG_RESEND "Reinviato:" + #define MSG_UNKNOWN_COMMAND "Comando sconosciuto: \"" + #define MSG_ACTIVE_EXTRUDER "Attiva Estrusore: " + #define MSG_INVALID_EXTRUDER "Estrusore non valido" + #define MSG_X_MIN "x_min: " + #define MSG_X_MAX "x_max: " + #define MSG_Y_MIN "y_min: " + #define MSG_Y_MAX "y_max: " + #define MSG_Z_MIN "z_min: " + #define MSG_Z_MAX "z_max: " + #define MSG_M119_REPORT "Segnalazione stato degli endstop" + #define MSG_ENDSTOP_HIT "INNESCATO" + #define MSG_ENDSTOP_OPEN "aperto" + #define MSG_HOTEND_OFFSET "Hotend offsets:" + + #define MSG_SD_CANT_OPEN_SUBDIR "Impossibile aprire sottocartella" + #define MSG_SD_INIT_FAIL "Fallita Inizializzazione SD" + #define MSG_SD_VOL_INIT_FAIL "Fallito il montaggio del Volume" + #define MSG_SD_OPENROOT_FAIL "Fallita l'apertura Cartella Principale" + #define MSG_SD_CARD_OK "SD card ok" + #define MSG_SD_WORKDIR_FAIL "Fallita l'apertura Cartella di Lavoro" + #define MSG_SD_OPEN_FILE_FAIL "Fallita l'apertura del File: " + #define MSG_SD_FILE_OPENED "File aperto: " + #define MSG_SD_SIZE " Dimensione: " + #define MSG_SD_FILE_SELECTED "File selezionato" + #define MSG_SD_WRITE_TO_FILE "Scrittura su file: " + #define MSG_SD_PRINTING_BYTE "Si sta scrivendo il byte su SD " + #define MSG_SD_NOT_PRINTING "Non si sta scrivendo su SD" + #define MSG_SD_ERR_WRITE_TO_FILE "Errore nella scrittura su file" + #define MSG_SD_CANT_ENTER_SUBDIR "Impossibile entrare nella sottocartella: " + + #define MSG_STEPPER_TOO_HIGH "Steprate troppo alto: " + #define MSG_ENDSTOPS_HIT "Raggiunto il fondo carrello: " + #define MSG_ERR_COLD_EXTRUDE_STOP " prevenuta estrusione fredda" + #define MSG_ERR_LONG_EXTRUDE_STOP " prevenuta estrusione troppo lunga" + +#endif + + +#if LANGUAGE_CHOICE == 8 + +// LCD Menu Messages + #define WELCOME_MSG MACHINE_NAME " Pronta." + #define MSG_SD_INSERTED "Cartao SD inserido" + #define MSG_SD_REMOVED "Cartao SD removido" + #define MSG_MAIN " Menu Principal \003" + #define MSG_AUTOSTART " Autostart" + #define MSG_DISABLE_STEPPERS " Apagar Motores" + #define MSG_AUTO_HOME " Ir para Origen" + #define MSG_SET_ORIGIN " Estabelecer Origen" + #define MSG_PREHEAT_PLA " pre-aquecer PLA" + #define MSG_PREHEAT_PLA_SETTINGS " pre-aquecer PLA Setting" + #define MSG_PREHEAT_ABS " pre-aquecer ABS" + #define MSG_PREHEAT_ABS_SETTINGS " pre-aquecer ABS Setting" + #define MSG_COOLDOWN " Esfriar" + #define MSG_SWITCH_PS_ON "Switch Power On" + #define MSG_SWITCH_PS_OFF "Switch Power Off" + #define MSG_EXTRUDE " Extrudar" + #define MSG_RETRACT " Retrair" + #define MSG_PREHEAT_PLA " pre-aquecer PLA" + #define MSG_PREHEAT_ABS " pre-aquecer ABS" + #define MSG_MOVE_AXIS " Mover eixo \x7E" + #define MSG_SPEED " Velocidade:" + #define MSG_NOZZLE " \002Nozzle:" + #define MSG_NOZZLE1 " \002Nozzle2:" + #define MSG_NOZZLE2 " \002Nozzle3:" + #define MSG_BED " \002Base:" + #define MSG_FAN_SPEED " Velocidade Ventoinha:" + #define MSG_FLOW " Fluxo:" + #define MSG_CONTROL " Controle \003" + #define MSG_MIN " \002 Min:" + #define MSG_MAX " \002 Max:" + #define MSG_FACTOR " \002 Fact:" + #define MSG_AUTOTEMP " Autotemp:" + #define MSG_ON "On " + #define MSG_OFF "Off" + #define MSG_PID_P " PID-P: " + #define MSG_PID_I " PID-I: " + #define MSG_PID_D " PID-D: " + #define MSG_PID_C " PID-C: " + #define MSG_ACC " Acc:" + #define MSG_VXY_JERK " Vxy-jerk: " + #define MSG_VZ_JERK "Vz-jerk" + #define MSG_VE_JERK "Ve-jerk" + #define MSG_VMAX " Vmax " + #define MSG_X "x:" + #define MSG_Y "y:" + #define MSG_Z "z:" + #define MSG_E "e:" + #define MSG_VMIN " Vmin:" + #define MSG_VTRAV_MIN " VTrav min:" + #define MSG_AMAX " Amax " + #define MSG_A_RETRACT " A-retract:" + #define MSG_XSTEPS " Xpasso/mm:" + #define MSG_YSTEPS " Ypasso/mm:" + #define MSG_ZSTEPS " Zpasso/mm:" + #define MSG_ESTEPS " Epasso/mm:" + #define MSG_MAIN_WIDE " Menu Principal \003" + #define MSG_RECTRACT_WIDE " Retrair \x7E" + #define MSG_TEMPERATURE_WIDE " Temperatura \x7E" + #define MSG_TEMPERATURE_RTN " Temperatura \003" + #define MSG_MOTION_WIDE " Movimento \x7E" + #define MSG_STORE_EPROM " Guardar memoria" + #define MSG_LOAD_EPROM " Carregar memoria" + #define MSG_RESTORE_FAILSAFE " Rest. de emergencia" + #define MSG_REFRESH "\004Recarregar" + #define MSG_WATCH " Monitorar \003" + #define MSG_PREPARE " Preparar \x7E" + #define MSG_PREPARE_ALT " Preparar \003" + #define MSG_CONTROL_ARROW " Controle \x7E" + #define MSG_RETRACT_ARROW " Retrair \x7E" + #define MSG_TUNE " Tune \x7E" + #define MSG_PAUSE_PRINT " Pausar Impressao \x7E" + #define MSG_RESUME_PRINT " Resumir Impressao \x7E" + #define MSG_STOP_PRINT " Parar Impressao \x7E" + #define MSG_CARD_MENU " Menu cartao SD \x7E" + #define MSG_NO_CARD " Sem cartao SD" + #define MSG_DWELL "Repouso..." + #define MSG_USERWAIT "Esperando Ordem..." + #define MSG_NO_MOVE "Sem movimento." + #define MSG_PART_RELEASE "Lancamento Parcial" + #define MSG_KILLED "PARADA DE EMERGENCIA. " + #define MSG_STOPPED "PARADA. " + #define MSG_STEPPER_RELEASED "Lancado." + #define MSG_CONTROL_RETRACT " Retrair mm:" + #define MSG_CONTROL_RETRACTF " Retrair F:" + #define MSG_CONTROL_RETRACT_ZLIFT " Levantar mm:" + #define MSG_CONTROL_RETRACT_RECOVER " DesRet +mm:" + #define MSG_CONTROL_RETRACT_RECOVERF " DesRet F:" + #define MSG_AUTORETRACT " AutoRetr.:" + #define MSG_SERIAL_ERROR_MENU_STRUCTURE "Algo esta errado na estrutura do Menu." + #define MSG_FILAMENTCHANGE "Change filament" + +// Serial Console Messages + + #define MSG_Enqueing "enqueing \"" + #define MSG_POWERUP "PowerUp" + #define MSG_EXTERNAL_RESET " Reset Externo" + #define MSG_BROWNOUT_RESET " Reset por voltagem incorreta" + #define MSG_WATCHDOG_RESET " Reset por Bloqueio" + #define MSG_SOFTWARE_RESET " Reset por Software" + #define MSG_MARLIN "Marlin " + #define MSG_AUTHOR " | Author: " + #define MSG_CONFIGURATION_VER " Ultima atualizacao: " + #define MSG_FREE_MEMORY " memoria Livre: " + #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: " + #define MSG_OK "ok" + #define MSG_FILE_SAVED "Guardado." + #define MSG_ERR_LINE_NO "O Numero da linha Nao e igual ao ultimo Numero da linha+1, Ultima linha:" + #define MSG_ERR_CHECKSUM_MISMATCH "O checksum Nao coincide, Ultima linha:" + #define MSG_ERR_NO_CHECKSUM "Nao foi possivel encontrar o checksum com o numero da linha, Ultima linha :" + #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Nao ha o numero da linha com o checksum, Ultima linha:" + #define MSG_FILE_PRINTED "Impressao terminada" + #define MSG_BEGIN_FILE_LIST "Começo da lista de arquivos" + #define MSG_END_FILE_LIST "Fim da lista de arquivos" + #define MSG_M104_INVALID_EXTRUDER "M104 Extrusor inválido " + #define MSG_M105_INVALID_EXTRUDER "M105 Extrusor inválido " + #define MSG_M218_INVALID_EXTRUDER "M218 Extrusor inválido " + #define MSG_ERR_NO_THERMISTORS "Nao ha termistor - no temp" + #define MSG_M109_INVALID_EXTRUDER "M109 Extrusor inválido " + #define MSG_HEATING "Aquecendo..." + #define MSG_HEATING_COMPLETE "Aquecido." + #define MSG_BED_HEATING "Aquecendo a Base." + #define MSG_BED_DONE "Base quente." + #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n" + #define MSG_COUNT_X " Conta X:" + #define MSG_ERR_KILLED "Impressora parada com kill() !!" + #define MSG_ERR_STOPPED "Impressora parada por erros. Coserte o erro e use M999 para recomeçar!. (Temperatura reiniciada. Ajuste antes de recomeçar)" + #define MSG_RESEND "Reenviar:" + #define MSG_UNKNOWN_COMMAND "Comando desconhecido:\"" + #define MSG_ACTIVE_EXTRUDER "Extrusor ativo: " + #define MSG_INVALID_EXTRUDER "Extrusor invalido" + #define MSG_X_MIN "x_min: " + #define MSG_X_MAX "x_max: " + #define MSG_Y_MIN "y_min: " + #define MSG_Y_MAX "y_max: " + #define MSG_Z_MIN "z_min: " + #define MSG_Z_MAX "z_max: " + #define MSG_M119_REPORT "Relatando estado do ponto final" + #define MSG_ENDSTOP_HIT "PULSADO" + #define MSG_ENDSTOP_OPEN "Aberto" + #define MSG_HOTEND_OFFSET "Hotend offsets:" + + #define MSG_SD_CANT_OPEN_SUBDIR "Nao pode abrir sub diretorio" + #define MSG_SD_INIT_FAIL "Falha ao iniciar SD" + #define MSG_SD_VOL_INIT_FAIL "Falha ao montar volume" + #define MSG_SD_OPENROOT_FAIL "Falha ao abrir diretorio raiz" + #define MSG_SD_CARD_OK "cartao SD ok" + #define MSG_SD_WORKDIR_FAIL "Falha ao abrir diretorio de trabalho" + #define MSG_SD_OPEN_FILE_FAIL "Erro ao abrir, Arquivo: " + #define MSG_SD_FILE_OPENED "Arquivo aberto:" + #define MSG_SD_SIZE " Size:" + #define MSG_SD_FILE_SELECTED "Arquivo selecionado" + #define MSG_SD_WRITE_TO_FILE "Escrevendo no arquivo: " + #define MSG_SD_PRINTING_BYTE "SD imprimindo o byte " + #define MSG_SD_NOT_PRINTING "Nao esta se imprimindo com o SD" + #define MSG_SD_ERR_WRITE_TO_FILE "Erro ao escrever no arquivo" + #define MSG_SD_CANT_ENTER_SUBDIR "Nao pode abrir o sub diretorio:" + + #define MSG_STEPPER_TOO_HIGH "Steprate muito alto : " + #define MSG_ENDSTOPS_HIT "O ponto final foi tocado: " + #define MSG_ERR_COLD_EXTRUDE_STOP " Extrusao a frio evitada" + #define MSG_ERR_LONG_EXTRUDE_STOP " Extrusao muito larga evitada" + + +#endif + + + +#if LANGUAGE_CHOICE == 9 + +// Finnish + +// LCD Menu Messages + #define WELCOME_MSG MACHINE_NAME " valmis" + #define MSG_SD_INSERTED "Kortti asetettu" + #define MSG_SD_REMOVED "Kortti poistettu" + #define MSG_MAIN "Palaa" + #define MSG_AUTOSTART "Automaatti" + #define MSG_DISABLE_STEPPERS "Vapauta moottorit" + #define MSG_AUTO_HOME "Aja referenssiin" + #define MSG_SET_ORIGIN "Aseta origo" + #define MSG_PREHEAT_PLA "Esilammita PLA" + #define MSG_PREHEAT_PLA_SETTINGS "Esilammita PLA konf" + #define MSG_PREHEAT_ABS "Esilammita ABS" + #define MSG_PREHEAT_ABS_SETTINGS "Esilammita ABS konf" + #define MSG_COOLDOWN "Jaahdyta" + #define MSG_SWITCH_PS_ON "Switch Power On" + #define MSG_SWITCH_PS_OFF "Switch Power Off" + #define MSG_EXTRUDE "Pursota" + #define MSG_RETRACT "Veda takaisin" + #define MSG_MOVE_AXIS "Liikuta akseleita" + #define MSG_SPEED "Nopeus" + #define MSG_NOZZLE "Suutin" + #define MSG_NOZZLE1 "Suutin2" + #define MSG_NOZZLE2 "Suutin3" + #define MSG_BED "Alusta" + #define MSG_FAN_SPEED "Tuul. nopeus" + #define MSG_FLOW "Virtaus" + #define MSG_CONTROL "Kontrolli" + #define MSG_MIN " \002 Min" + #define MSG_MAX " \002 Max" + #define MSG_FACTOR " \002 Kerr" + #define MSG_AUTOTEMP "Autotemp" + #define MSG_ON "On " + #define MSG_OFF "Off" + #define MSG_PID_P "PID-P" + #define MSG_PID_I "PID-I" + #define MSG_PID_D "PID-D" + #define MSG_PID_C "PID-C" + #define MSG_ACC "Kiihtyv" + #define MSG_VXY_JERK "Vxy-jerk" + #define MSG_VZ_JERK "Vz-jerk" + #define MSG_VE_JERK "Ve-jerk" + #define MSG_VMAX "Vmax " + #define MSG_X "x" + #define MSG_Y "y" + #define MSG_Z "z" + #define MSG_E "e" + #define MSG_VMIN "Vmin" + #define MSG_VTRAV_MIN "VLiike min" + #define MSG_AMAX "Amax " + #define MSG_A_RETRACT "A-peruuta" + #define MSG_XSTEPS "Xsteps/mm" + #define MSG_YSTEPS "Ysteps/mm" + #define MSG_ZSTEPS "Zsteps/mm" + #define MSG_ESTEPS "Esteps/mm" + #define MSG_RECTRACT "Veda takaisin" + #define MSG_TEMPERATURE "Lampotila" + #define MSG_MOTION "Liike" + #define MSG_CONTRAST "LCD contrast" + #define MSG_STORE_EPROM "Tallenna muistiin" + #define MSG_LOAD_EPROM "Lataa muistista" + #define MSG_RESTORE_FAILSAFE "Palauta oletus" + #define MSG_REFRESH "Paivita" + #define MSG_WATCH "Seuraa" + #define MSG_PREPARE "Valmistele" + #define MSG_TUNE "Saada" + #define MSG_PAUSE_PRINT "Keskeyta tulostus" + #define MSG_RESUME_PRINT "Jatka tulostusta" + #define MSG_STOP_PRINT "Pysayta tulostus" + #define MSG_CARD_MENU "Korttivalikko" + #define MSG_NO_CARD "Ei korttia" + #define MSG_DWELL "Nukkumassa..." + #define MSG_USERWAIT "Odotetaan valintaa..." + #define MSG_RESUMING "Jatketaan tulostusta" + #define MSG_NO_MOVE "Ei liiketta." + #define MSG_KILLED "KILLED. " + #define MSG_STOPPED "STOPPED. " + #define MSG_CONTROL_RETRACT "Veda mm" + #define MSG_CONTROL_RETRACTF "Veda F" + #define MSG_CONTROL_RETRACT_ZLIFT "Z mm" + #define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm" + #define MSG_CONTROL_RETRACT_RECOVERF "UnRet F" + #define MSG_AUTORETRACT "AutoVeto." + #define MSG_FILAMENTCHANGE "Change filament" + +// Serial Console Messages + + #define MSG_Enqueing "jonoon \"" + #define MSG_POWERUP "Kaynnistys" + #define MSG_EXTERNAL_RESET " Ulkoinen Reset" + #define MSG_BROWNOUT_RESET " Alajannite Reset" + #define MSG_WATCHDOG_RESET " Vahtikoira Reset" + #define MSG_SOFTWARE_RESET " Ohjelmisto Reset" + #define MSG_MARLIN "Marlin " + #define MSG_AUTHOR " | Author: " + #define MSG_CONFIGURATION_VER " Paivitetty viimeksi: " + #define MSG_FREE_MEMORY " Vapaata muistia: " + #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: " + #define MSG_OK "ok" + #define MSG_FILE_SAVED "Tiedosto tallennettu." + #define MSG_ERR_LINE_NO "Rivinumero ei ole Viimeisin rivi+1, Viimeisin rivi: " + #define MSG_ERR_CHECKSUM_MISMATCH "Tarkistesummassa virhe, Viimeisin rivi: " + #define MSG_ERR_NO_CHECKSUM "Rivilla ei tarkistesummaa, Viimeisin rivi: " + #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Ei rivinumeroa tarkistesumman kanssa, Viimeisin rivi: " + #define MSG_FILE_PRINTED "Tiedoston tulostus valmis" + #define MSG_BEGIN_FILE_LIST "Tiedostolistauksen alku" + #define MSG_END_FILE_LIST "Tiedostolistauksen loppu" + #define MSG_M104_INVALID_EXTRUDER "M104 Virheellinen suutin " + #define MSG_M105_INVALID_EXTRUDER "M105 Virheellinen suutin " + #define MSG_M218_INVALID_EXTRUDER "M218 Virheellinen suutin " + #define MSG_ERR_NO_THERMISTORS "Ei termistoreja - ei lampotiloja" + #define MSG_M109_INVALID_EXTRUDER "M109 Virheellinen suutin " + #define MSG_HEATING "Lammitan..." + #define MSG_HEATING_COMPLETE "Lammitys valmis." + #define MSG_BED_HEATING "Alusta lampiaa." + #define MSG_BED_DONE "Alusta valmis." + #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n" + #define MSG_COUNT_X " Laskuri X: " + #define MSG_ERR_KILLED "Tulostin pysaytetty. kill():ia kutsuttu!" + #define MSG_ERR_STOPPED "Tulostin pysaytetty virheiden vuoksi. Korjaa virheet ja kayta M999 kaynnistaaksesi uudelleen. (Lampotila nollattiin. Aseta lampotila sen jalkeen kun jatkat.)" + #define MSG_RESEND "Uudelleenlahetys: " + #define MSG_UNKNOWN_COMMAND "Tuntematon komento: \"" + #define MSG_ACTIVE_EXTRUDER "Aktiivinen suutin: " + #define MSG_INVALID_EXTRUDER "Virheellinen suutin" + #define MSG_X_MIN "x_min: " + #define MSG_X_MAX "x_max: " + #define MSG_Y_MIN "y_min: " + #define MSG_Y_MAX "y_max: " + #define MSG_Z_MIN "z_min: " + #define MSG_Z_MAX "z_max: " + #define MSG_M119_REPORT "Rajakytkimien tilaraportti" + #define MSG_ENDSTOP_HIT "AKTIIVISENA" + #define MSG_ENDSTOP_OPEN "avoinna" + #define MSG_HOTEND_OFFSET "Hotend offsets:" + + #define MSG_SD_CANT_OPEN_SUBDIR "Alihakemistoa ei voitu avata" + #define MSG_SD_INIT_FAIL "SD alustus epaonnistui" + #define MSG_SD_VOL_INIT_FAIL "volume.init epaonnistui" + #define MSG_SD_OPENROOT_FAIL "openRoot epaonnistui" + #define MSG_SD_CARD_OK "SD kortti ok" + #define MSG_SD_WORKDIR_FAIL "workDir open epaonnistui" + #define MSG_SD_OPEN_FILE_FAIL "avaus epaonnistui, Tiedosto: " + #define MSG_SD_FILE_OPENED "Tiedosto avattu: " + #define MSG_SD_SIZE " Koko: " + #define MSG_SD_FILE_SELECTED "Tiedosto valittu" + #define MSG_SD_WRITE_TO_FILE "Kirjoitetaan tiedostoon: " + #define MSG_SD_PRINTING_BYTE "SD tulostus byte " + #define MSG_SD_NOT_PRINTING "Ei SD tulostus" + #define MSG_SD_ERR_WRITE_TO_FILE "virhe kirjoitettaessa tiedostoon" + #define MSG_SD_CANT_ENTER_SUBDIR "Alihakemistoon ei voitu siirtya: " + + #define MSG_STEPPER_TOO_HIGH "Askellustaajuus liian suuri: " + #define MSG_ENDSTOPS_HIT "paatyrajat aktivoitu: " + #define MSG_ERR_COLD_EXTRUDE_STOP " kylmana pursotus estetty" + #define MSG_ERR_LONG_EXTRUDE_STOP " liian pitka pursotus estetty" + +#endif +#endif // ifndef LANGUAGE_H From 326d2db025752335a67605bc80b33cc4cfd25e20 Mon Sep 17 00:00:00 2001 From: Guillaume Seguin Date: Tue, 23 Jul 2013 22:11:54 +0200 Subject: [PATCH 09/11] Update language.h so that all languages compile Some strings still need translation, but at least everything compiles. --- Marlin/language.h | 31 ++++++++++++++++++++++--------- 1 file changed, 22 insertions(+), 9 deletions(-) diff --git a/Marlin/language.h b/Marlin/language.h index f331a066d0..6b925195b3 100644 --- a/Marlin/language.h +++ b/Marlin/language.h @@ -294,6 +294,8 @@ #define MSG_CONTROL_RETRACT_RECOVERF "Cof. wycof. F" #define MSG_AUTORETRACT "Auto. wycofanie" #define MSG_FILAMENTCHANGE "Change filament" + #define MSG_INIT_SDCARD "Init. SD-Card" + #define MSG_CNG_SDCARD "Change SD-Card" // Serial Console Messages @@ -427,11 +429,10 @@ #define MSG_ZSTEPS " Zpas/mm:" #define MSG_ESTEPS " Epas/mm:" #define MSG_MAIN_WIDE " Principal \003" -#define MSG_RECTRACT_WIDE " Rectractater \x7E" -#define MSG_TEMPERATURE_WIDE " Temperature \x7E" -#define MSG_TEMPERATURE_RTN " Temperature \003" -#define MSG_MOTION_WIDE " Mouvement \x7E" - #define MSG_CONTRAST "LCD contrast" +#define MSG_RECTRACT "Rectracter" +#define MSG_TEMPERATURE "Temperature" +#define MSG_MOTION "Mouvement" +#define MSG_CONTRAST "LCD contrast" #define MSG_STORE_EPROM " Sauvegarder memoire" #define MSG_LOAD_EPROM " Lire memoire" #define MSG_RESTORE_FAILSAFE " Restaurer memoire" @@ -449,6 +450,7 @@ #define MSG_NO_CARD " Pas de carte" #define MSG_DWELL "Repos..." #define MSG_USERWAIT "Attente de l'utilisateur..." +#define MSG_RESUMING "Reprise de l'impression" #define MSG_NO_MOVE "Aucun mouvement." #define MSG_PART_RELEASE "Relache partielle" #define MSG_KILLED "TUE." @@ -461,6 +463,8 @@ #define MSG_CONTROL_RETRACT_RECOVERF " UnRet F:" #define MSG_AUTORETRACT " Retract. Auto.:" #define MSG_FILAMENTCHANGE "Change filament" +#define MSG_INIT_SDCARD "Init. la carte SD" +#define MSG_CNG_SDCARD "Changer de carte SD" // Serial Console Messages @@ -626,6 +630,8 @@ #define MSG_CONTROL_RETRACT_RECOVERF "UnRet F" #define MSG_AUTORETRACT "AutoRetr." #define MSG_FILAMENTCHANGE "Filament wechseln" + #define MSG_INIT_SDCARD "Init. SD-Card" + #define MSG_CNG_SDCARD "Change SD-Card" // Serial Console Messages @@ -944,6 +950,7 @@ #define MSG_NO_CARD " Нет карты" #define MSG_DWELL "Сон..." #define MSG_USERWAIT "Нажмите для продолж." +#define MSG_RESUMING "Resuming print" #define MSG_NO_MOVE "Нет движения. " #define MSG_PART_RELEASE " Извлечение принта " #define MSG_KILLED "УБИТО. " @@ -955,6 +962,8 @@ #define MSG_CONTROL_RETRACT_RECOVERF " Возврат F:" #define MSG_AUTORETRACT " АвтоОткат:" #define MSG_FILAMENTCHANGE "Change filament" +#define MSG_INIT_SDCARD "Init. SD-Card" +#define MSG_CNG_SDCARD "Change SD-Card" // Serial Console Messages @@ -1250,10 +1259,9 @@ #define MSG_ZSTEPS " Zpasso/mm:" #define MSG_ESTEPS " Epasso/mm:" #define MSG_MAIN_WIDE " Menu Principal \003" - #define MSG_RECTRACT_WIDE " Retrair \x7E" - #define MSG_TEMPERATURE_WIDE " Temperatura \x7E" - #define MSG_TEMPERATURE_RTN " Temperatura \003" - #define MSG_MOTION_WIDE " Movimento \x7E" + #define MSG_RECTRACT "Retrair" + #define MSG_TEMPERATURE "Temperatura" + #define MSG_MOTION "Movimento" #define MSG_STORE_EPROM " Guardar memoria" #define MSG_LOAD_EPROM " Carregar memoria" #define MSG_RESTORE_FAILSAFE " Rest. de emergencia" @@ -1271,6 +1279,7 @@ #define MSG_NO_CARD " Sem cartao SD" #define MSG_DWELL "Repouso..." #define MSG_USERWAIT "Esperando Ordem..." + #define MSG_RESUMING "Resuming print" #define MSG_NO_MOVE "Sem movimento." #define MSG_PART_RELEASE "Lancamento Parcial" #define MSG_KILLED "PARADA DE EMERGENCIA. " @@ -1284,6 +1293,8 @@ #define MSG_AUTORETRACT " AutoRetr.:" #define MSG_SERIAL_ERROR_MENU_STRUCTURE "Algo esta errado na estrutura do Menu." #define MSG_FILAMENTCHANGE "Change filament" + #define MSG_INIT_SDCARD "Init. SD-Card" + #define MSG_CNG_SDCARD "Change SD-Card" // Serial Console Messages @@ -1448,6 +1459,8 @@ #define MSG_CONTROL_RETRACT_RECOVERF "UnRet F" #define MSG_AUTORETRACT "AutoVeto." #define MSG_FILAMENTCHANGE "Change filament" + #define MSG_INIT_SDCARD "Init. SD-Card" + #define MSG_CNG_SDCARD "Change SD-Card" // Serial Console Messages From 44f327d7380cbcac042bf6be2b23129595146dfa Mon Sep 17 00:00:00 2001 From: Guillaume Seguin Date: Tue, 23 Jul 2013 22:13:40 +0200 Subject: [PATCH 10/11] Uniformly reindent language.h --- Marlin/language.h | 958 +++++++++++++++++++++++----------------------- 1 file changed, 479 insertions(+), 479 deletions(-) diff --git a/Marlin/language.h b/Marlin/language.h index 6b925195b3..17222c7cd2 100644 --- a/Marlin/language.h +++ b/Marlin/language.h @@ -373,169 +373,169 @@ #if LANGUAGE_CHOICE == 3 -#define WELCOME_MSG MACHINE_NAME " Pret." -#define MSG_SD_INSERTED "Carte inseree" -#define MSG_SD_REMOVED "Carte retiree" -#define MSG_MAIN " Principal \003" -#define MSG_AUTOSTART " Demarrage auto." -#define MSG_DISABLE_STEPPERS " Desactiver moteurs" -#define MSG_AUTO_HOME " Home auto." -#define MSG_SET_ORIGIN " Regler origine" -#define MSG_PREHEAT_PLA " Prechauffage PLA" -#define MSG_PREHEAT_PLA_SETTINGS " Regl. prechauffe PLA" -#define MSG_PREHEAT_ABS " Prechauffage ABS" -#define MSG_PREHEAT_ABS_SETTINGS " Regl. prechauffe ABS" -#define MSG_COOLDOWN " Refroidissement" -#define MSG_SWITCH_PS_ON "Allumer alimentation" -#define MSG_SWITCH_PS_OFF "Eteindre alimentation" -#define MSG_EXTRUDE " Extrusion" -#define MSG_RETRACT " Retractation" -#define MSG_PREHEAT_PLA " Prechauffage PLA" -#define MSG_PREHEAT_ABS " Prechauffage ABS" -#define MSG_MOVE_AXIS " Deplacer axe \x7E" -#define MSG_SPEED " Vitesse:" -#define MSG_NOZZLE " \002Buse:" -#define MSG_NOZZLE1 " \002Buse2:" -#define MSG_NOZZLE2 " \002Buse3:" -#define MSG_BED " \002Lit:" -#define MSG_FAN_SPEED " Vitesse ventilateur:" -#define MSG_FLOW " Flux:" -#define MSG_CONTROL " Controle \003" -#define MSG_MIN " \002 Min:" -#define MSG_MAX " \002 Max:" -#define MSG_FACTOR " \002 Facteur:" -#define MSG_AUTOTEMP " Temp. Auto.:" -#define MSG_ON "Marche " -#define MSG_OFF "Arret" -#define MSG_PID_P " PID-P: " -#define MSG_PID_I " PID-I: " -#define MSG_PID_D " PID-D: " -#define MSG_PID_C " PID-C: " -#define MSG_ACC " Acc:" -#define MSG_VXY_JERK "Vxy-jerk" -#define MSG_VZ_JERK "Vz-jerk" -#define MSG_VE_JERK "Ve-jerk" -#define MSG_VMAX " Vmax " -#define MSG_X "x:" -#define MSG_Y "y:" -#define MSG_Z "z:" -#define MSG_E "e:" -#define MSG_VMIN " Vmin:" -#define MSG_VTRAV_MIN " Vdepl min:" -#define MSG_AMAX " Amax " -#define MSG_A_RETRACT " A-retract:" -#define MSG_XSTEPS " Xpas/mm:" -#define MSG_YSTEPS " Ypas/mm:" -#define MSG_ZSTEPS " Zpas/mm:" -#define MSG_ESTEPS " Epas/mm:" -#define MSG_MAIN_WIDE " Principal \003" -#define MSG_RECTRACT "Rectracter" -#define MSG_TEMPERATURE "Temperature" -#define MSG_MOTION "Mouvement" -#define MSG_CONTRAST "LCD contrast" -#define MSG_STORE_EPROM " Sauvegarder memoire" -#define MSG_LOAD_EPROM " Lire memoire" -#define MSG_RESTORE_FAILSAFE " Restaurer memoire" -#define MSG_REFRESH "\004Actualiser" -#define MSG_WATCH " Surveiller \003" -#define MSG_PREPARE " Preparer \x7E" -#define MSG_PREPARE_ALT " Prepare \003" -#define MSG_CONTROL_ARROW " Controle \x7E" -#define MSG_RETRACT_ARROW " Retracter \x7E" -#define MSG_TUNE " Regler \x7E" -#define MSG_PAUSE_PRINT " Pause impression \x7E" -#define MSG_RESUME_PRINT " Reprendre impression \x7E" -#define MSG_STOP_PRINT " Arreter impression \x7E" -#define MSG_CARD_MENU " Menu carte \x7E" -#define MSG_NO_CARD " Pas de carte" -#define MSG_DWELL "Repos..." -#define MSG_USERWAIT "Attente de l'utilisateur..." -#define MSG_RESUMING "Reprise de l'impression" -#define MSG_NO_MOVE "Aucun mouvement." -#define MSG_PART_RELEASE "Relache partielle" -#define MSG_KILLED "TUE." -#define MSG_STOPPED "STOPPE." -#define MSG_STEPPER_RELEASED "RELACHE." -#define MSG_CONTROL_RETRACT " Retractation mm:" -#define MSG_CONTROL_RETRACTF " Retractation F:" -#define MSG_CONTROL_RETRACT_ZLIFT " Hop mm:" -#define MSG_CONTROL_RETRACT_RECOVER " UnRet +mm:" -#define MSG_CONTROL_RETRACT_RECOVERF " UnRet F:" -#define MSG_AUTORETRACT " Retract. Auto.:" -#define MSG_FILAMENTCHANGE "Change filament" -#define MSG_INIT_SDCARD "Init. la carte SD" -#define MSG_CNG_SDCARD "Changer de carte SD" + #define WELCOME_MSG MACHINE_NAME " Pret." + #define MSG_SD_INSERTED "Carte inseree" + #define MSG_SD_REMOVED "Carte retiree" + #define MSG_MAIN " Principal \003" + #define MSG_AUTOSTART " Demarrage auto." + #define MSG_DISABLE_STEPPERS " Desactiver moteurs" + #define MSG_AUTO_HOME " Home auto." + #define MSG_SET_ORIGIN " Regler origine" + #define MSG_PREHEAT_PLA " Prechauffage PLA" + #define MSG_PREHEAT_PLA_SETTINGS " Regl. prechauffe PLA" + #define MSG_PREHEAT_ABS " Prechauffage ABS" + #define MSG_PREHEAT_ABS_SETTINGS " Regl. prechauffe ABS" + #define MSG_COOLDOWN " Refroidissement" + #define MSG_SWITCH_PS_ON "Allumer alimentation" + #define MSG_SWITCH_PS_OFF "Eteindre alimentation" + #define MSG_EXTRUDE " Extrusion" + #define MSG_RETRACT " Retractation" + #define MSG_PREHEAT_PLA " Prechauffage PLA" + #define MSG_PREHEAT_ABS " Prechauffage ABS" + #define MSG_MOVE_AXIS " Deplacer axe \x7E" + #define MSG_SPEED " Vitesse:" + #define MSG_NOZZLE " \002Buse:" + #define MSG_NOZZLE1 " \002Buse2:" + #define MSG_NOZZLE2 " \002Buse3:" + #define MSG_BED " \002Lit:" + #define MSG_FAN_SPEED " Vitesse ventilateur:" + #define MSG_FLOW " Flux:" + #define MSG_CONTROL " Controle \003" + #define MSG_MIN " \002 Min:" + #define MSG_MAX " \002 Max:" + #define MSG_FACTOR " \002 Facteur:" + #define MSG_AUTOTEMP " Temp. Auto.:" + #define MSG_ON "Marche " + #define MSG_OFF "Arret" + #define MSG_PID_P " PID-P: " + #define MSG_PID_I " PID-I: " + #define MSG_PID_D " PID-D: " + #define MSG_PID_C " PID-C: " + #define MSG_ACC " Acc:" + #define MSG_VXY_JERK "Vxy-jerk" + #define MSG_VZ_JERK "Vz-jerk" + #define MSG_VE_JERK "Ve-jerk" + #define MSG_VMAX " Vmax " + #define MSG_X "x:" + #define MSG_Y "y:" + #define MSG_Z "z:" + #define MSG_E "e:" + #define MSG_VMIN " Vmin:" + #define MSG_VTRAV_MIN " Vdepl min:" + #define MSG_AMAX " Amax " + #define MSG_A_RETRACT " A-retract:" + #define MSG_XSTEPS " Xpas/mm:" + #define MSG_YSTEPS " Ypas/mm:" + #define MSG_ZSTEPS " Zpas/mm:" + #define MSG_ESTEPS " Epas/mm:" + #define MSG_MAIN_WIDE " Principal \003" + #define MSG_RECTRACT "Rectracter" + #define MSG_TEMPERATURE "Temperature" + #define MSG_MOTION "Mouvement" + #define MSG_CONTRAST "LCD contrast" + #define MSG_STORE_EPROM " Sauvegarder memoire" + #define MSG_LOAD_EPROM " Lire memoire" + #define MSG_RESTORE_FAILSAFE " Restaurer memoire" + #define MSG_REFRESH "\004Actualiser" + #define MSG_WATCH " Surveiller \003" + #define MSG_PREPARE " Preparer \x7E" + #define MSG_PREPARE_ALT " Prepare \003" + #define MSG_CONTROL_ARROW " Controle \x7E" + #define MSG_RETRACT_ARROW " Retracter \x7E" + #define MSG_TUNE " Regler \x7E" + #define MSG_PAUSE_PRINT " Pause impression \x7E" + #define MSG_RESUME_PRINT " Reprendre impression \x7E" + #define MSG_STOP_PRINT " Arreter impression \x7E" + #define MSG_CARD_MENU " Menu carte \x7E" + #define MSG_NO_CARD " Pas de carte" + #define MSG_DWELL "Repos..." + #define MSG_USERWAIT "Attente de l'utilisateur..." + #define MSG_RESUMING "Reprise de l'impression" + #define MSG_NO_MOVE "Aucun mouvement." + #define MSG_PART_RELEASE "Relache partielle" + #define MSG_KILLED "TUE." + #define MSG_STOPPED "STOPPE." + #define MSG_STEPPER_RELEASED "RELACHE." + #define MSG_CONTROL_RETRACT " Retractation mm:" + #define MSG_CONTROL_RETRACTF " Retractation F:" + #define MSG_CONTROL_RETRACT_ZLIFT " Hop mm:" + #define MSG_CONTROL_RETRACT_RECOVER " UnRet +mm:" + #define MSG_CONTROL_RETRACT_RECOVERF " UnRet F:" + #define MSG_AUTORETRACT " Retract. Auto.:" + #define MSG_FILAMENTCHANGE "Change filament" + #define MSG_INIT_SDCARD "Init. la carte SD" + #define MSG_CNG_SDCARD "Changer de carte SD" // Serial Console Messages -#define MSG_Enqueing "Mise en tampon \"" -#define MSG_POWERUP "Allumage" -#define MSG_EXTERNAL_RESET " RAZ Externe" -#define MSG_BROWNOUT_RESET " RAZ defaut alim." -#define MSG_WATCHDOG_RESET " RAZ Watchdog" -#define MSG_SOFTWARE_RESET " RAZ logicielle" -#define MSG_MARLIN "Marlin " -#define MSG_AUTHOR " | Auteur: " -#define MSG_CONFIGURATION_VER " Derniere MaJ: " -#define MSG_FREE_MEMORY " Memoire libre: " -#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: " -#define MSG_OK "ok" -#define MSG_FILE_SAVED "Fichier enregistre." -#define MSG_ERR_LINE_NO "Le numero de ligne n'est pas la derniere ligne + 1, derniere ligne: " -#define MSG_ERR_CHECKSUM_MISMATCH "Erreur somme de controle, derniere ligne: " -#define MSG_ERR_NO_CHECKSUM "Pas de somme de controle avec le numero de ligne, derniere ligne: " -#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Pas de numero de ligne avec somme de controle, derniere ligne: " -#define MSG_FILE_PRINTED "Impression terminee" -#define MSG_BEGIN_FILE_LIST "Debut de la liste de fichiers" -#define MSG_END_FILE_LIST "Fin de la liste de fichiers" -#define MSG_M104_INVALID_EXTRUDER "M104 Extruder invalide" -#define MSG_M105_INVALID_EXTRUDER "M105 Extruder invalide" -#define MSG_M218_INVALID_EXTRUDER "M218 Extruder invalide" -#define MSG_ERR_NO_THERMISTORS "Pas de thermistor, pas de temperature" -#define MSG_M109_INVALID_EXTRUDER "M109 Extruder invalide " -#define MSG_HEATING "En chauffe..." -#define MSG_HEATING_COMPLETE "Chauffe terminee." -#define MSG_BED_HEATING "Chauffe du lit." -#define MSG_BED_DONE "Chauffe du lit terminee." -#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n" -#define MSG_COUNT_X " Compteur X: " -#define MSG_ERR_KILLED "Impression arretee. kill() appelee!" -#define MSG_ERR_STOPPED "Impression arretee a cause d'erreurs. Corriger les erreurs et utiliser M999 pour la reprendre. (Temperature remise a zero. Reactivez la apres redemarrage)" -#define MSG_RESEND "Renvoie: " -#define MSG_UNKNOWN_COMMAND "Commande inconnue: \"" -#define MSG_ACTIVE_EXTRUDER "Extrudeur actif: " -#define MSG_INVALID_EXTRUDER "Extrudeur invalide" -#define MSG_X_MIN "x_min: " -#define MSG_X_MAX "x_max: " -#define MSG_Y_MIN "y_min: " -#define MSG_Y_MAX "y_max: " -#define MSG_Z_MIN "z_min: " -#define MSG_Z_MAX "z_max: " -#define MSG_M119_REPORT "Affichage du status des fin de course" -#define MSG_ENDSTOP_HIT "DECLENCHE" -#define MSG_ENDSTOP_OPEN "OUVERT" -#define MSG_HOTEND_OFFSET "Hotend offsets:" + #define MSG_Enqueing "Mise en tampon \"" + #define MSG_POWERUP "Allumage" + #define MSG_EXTERNAL_RESET " RAZ Externe" + #define MSG_BROWNOUT_RESET " RAZ defaut alim." + #define MSG_WATCHDOG_RESET " RAZ Watchdog" + #define MSG_SOFTWARE_RESET " RAZ logicielle" + #define MSG_MARLIN "Marlin " + #define MSG_AUTHOR " | Auteur: " + #define MSG_CONFIGURATION_VER " Derniere MaJ: " + #define MSG_FREE_MEMORY " Memoire libre: " + #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: " + #define MSG_OK "ok" + #define MSG_FILE_SAVED "Fichier enregistre." + #define MSG_ERR_LINE_NO "Le numero de ligne n'est pas la derniere ligne + 1, derniere ligne: " + #define MSG_ERR_CHECKSUM_MISMATCH "Erreur somme de controle, derniere ligne: " + #define MSG_ERR_NO_CHECKSUM "Pas de somme de controle avec le numero de ligne, derniere ligne: " + #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Pas de numero de ligne avec somme de controle, derniere ligne: " + #define MSG_FILE_PRINTED "Impression terminee" + #define MSG_BEGIN_FILE_LIST "Debut de la liste de fichiers" + #define MSG_END_FILE_LIST "Fin de la liste de fichiers" + #define MSG_M104_INVALID_EXTRUDER "M104 Extruder invalide" + #define MSG_M105_INVALID_EXTRUDER "M105 Extruder invalide" + #define MSG_M218_INVALID_EXTRUDER "M218 Extruder invalide" + #define MSG_ERR_NO_THERMISTORS "Pas de thermistor, pas de temperature" + #define MSG_M109_INVALID_EXTRUDER "M109 Extruder invalide " + #define MSG_HEATING "En chauffe..." + #define MSG_HEATING_COMPLETE "Chauffe terminee." + #define MSG_BED_HEATING "Chauffe du lit." + #define MSG_BED_DONE "Chauffe du lit terminee." + #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n" + #define MSG_COUNT_X " Compteur X: " + #define MSG_ERR_KILLED "Impression arretee. kill() appelee!" + #define MSG_ERR_STOPPED "Impression arretee a cause d'erreurs. Corriger les erreurs et utiliser M999 pour la reprendre. (Temperature remise a zero. Reactivez la apres redemarrage)" + #define MSG_RESEND "Renvoie: " + #define MSG_UNKNOWN_COMMAND "Commande inconnue: \"" + #define MSG_ACTIVE_EXTRUDER "Extrudeur actif: " + #define MSG_INVALID_EXTRUDER "Extrudeur invalide" + #define MSG_X_MIN "x_min: " + #define MSG_X_MAX "x_max: " + #define MSG_Y_MIN "y_min: " + #define MSG_Y_MAX "y_max: " + #define MSG_Z_MIN "z_min: " + #define MSG_Z_MAX "z_max: " + #define MSG_M119_REPORT "Affichage du status des fin de course" + #define MSG_ENDSTOP_HIT "DECLENCHE" + #define MSG_ENDSTOP_OPEN "OUVERT" + #define MSG_HOTEND_OFFSET "Hotend offsets:" -#define MSG_SD_CANT_OPEN_SUBDIR "Impossible d'ouvrir le sous-repertoire" -#define MSG_SD_INIT_FAIL "Echec de l'initialisation de la SD" -#define MSG_SD_VOL_INIT_FAIL "Echec de volume.init" -#define MSG_SD_OPENROOT_FAIL "Echec openRoot" -#define MSG_SD_CARD_OK "Carte SD Ok" -#define MSG_SD_WORKDIR_FAIL "Echec d'ouverture workDir" -#define MSG_SD_OPEN_FILE_FAIL "Echec d'ouverture, Fichier: " -#define MSG_SD_FILE_OPENED "Fichier ouvert: " -#define MSG_SD_SIZE " Taille: " -#define MSG_SD_FILE_SELECTED "Fichier selectionne" -#define MSG_SD_WRITE_TO_FILE "Ecriture dans le fichier: " -#define MSG_SD_PRINTING_BYTE "Octet impression SD " -#define MSG_SD_NOT_PRINTING "Pas d'impression SD" -#define MSG_SD_ERR_WRITE_TO_FILE "Erreur d'ecriture dans le fichier" -#define MSG_SD_CANT_ENTER_SUBDIR "Impossible d'entrer dans le sous-repertoire: " + #define MSG_SD_CANT_OPEN_SUBDIR "Impossible d'ouvrir le sous-repertoire" + #define MSG_SD_INIT_FAIL "Echec de l'initialisation de la SD" + #define MSG_SD_VOL_INIT_FAIL "Echec de volume.init" + #define MSG_SD_OPENROOT_FAIL "Echec openRoot" + #define MSG_SD_CARD_OK "Carte SD Ok" + #define MSG_SD_WORKDIR_FAIL "Echec d'ouverture workDir" + #define MSG_SD_OPEN_FILE_FAIL "Echec d'ouverture, Fichier: " + #define MSG_SD_FILE_OPENED "Fichier ouvert: " + #define MSG_SD_SIZE " Taille: " + #define MSG_SD_FILE_SELECTED "Fichier selectionne" + #define MSG_SD_WRITE_TO_FILE "Ecriture dans le fichier: " + #define MSG_SD_PRINTING_BYTE "Octet impression SD " + #define MSG_SD_NOT_PRINTING "Pas d'impression SD" + #define MSG_SD_ERR_WRITE_TO_FILE "Erreur d'ecriture dans le fichier" + #define MSG_SD_CANT_ENTER_SUBDIR "Impossible d'entrer dans le sous-repertoire: " -#define MSG_STEPPER_TOO_HIGH "Steprate trop eleve: " -#define MSG_ENDSTOPS_HIT "Fin de course atteint: " -#define MSG_ERR_COLD_EXTRUDE_STOP " Extrusion a froid evitee" -#define MSG_ERR_LONG_EXTRUDE_STOP " Extrusion longue evitee" + #define MSG_STEPPER_TOO_HIGH "Steprate trop eleve: " + #define MSG_ENDSTOPS_HIT "Fin de course atteint: " + #define MSG_ERR_COLD_EXTRUDE_STOP " Extrusion a froid evitee" + #define MSG_ERR_LONG_EXTRUDE_STOP " Extrusion longue evitee" #endif @@ -617,21 +617,21 @@ #define MSG_NO_CARD "Keine SDKarte" #define MSG_DWELL "Warten..." #define MSG_USERWAIT "Warte auf Nutzer..." - #define MSG_RESUMING "Druck fortsetzung" + #define MSG_RESUMING "Druck fortsetzung" #define MSG_NO_MOVE "Kein Zug." #define MSG_PART_RELEASE "Stepper tlw frei" #define MSG_KILLED "KILLED" #define MSG_STOPPED "GESTOPPT" #define MSG_STEPPER_RELEASED "Stepper frei" - #define MSG_CONTROL_RETRACT "Retract mm" - #define MSG_CONTROL_RETRACTF "Retract F" - #define MSG_CONTROL_RETRACT_ZLIFT "Hop mm" - #define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm" - #define MSG_CONTROL_RETRACT_RECOVERF "UnRet F" - #define MSG_AUTORETRACT "AutoRetr." - #define MSG_FILAMENTCHANGE "Filament wechseln" - #define MSG_INIT_SDCARD "Init. SD-Card" - #define MSG_CNG_SDCARD "Change SD-Card" + #define MSG_CONTROL_RETRACT "Retract mm" + #define MSG_CONTROL_RETRACTF "Retract F" + #define MSG_CONTROL_RETRACT_ZLIFT "Hop mm" + #define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm" + #define MSG_CONTROL_RETRACT_RECOVERF "UnRet F" + #define MSG_AUTORETRACT "AutoRetr." + #define MSG_FILAMENTCHANGE "Filament wechseln" + #define MSG_INIT_SDCARD "Init. SD-Card" + #define MSG_CNG_SDCARD "Change SD-Card" // Serial Console Messages @@ -710,329 +710,329 @@ #if LANGUAGE_CHOICE == 5 // LCD Menu Messages -#define WELCOME_MSG MACHINE_NAME "Lista." -#define MSG_SD_INSERTED "Tarjeta SD Colocada" -#define MSG_SD_REMOVED "Tarjeta SD Retirada" -#define MSG_MAIN "Menu Principal" -#define MSG_AUTOSTART " Autostart" -#define MSG_DISABLE_STEPPERS "Apagar Motores" -#define MSG_AUTO_HOME "Llevar al Origen" // "Llevar Ejes al Cero" -#define MSG_SET_ORIGIN "Establecer Cero" -#define MSG_PREHEAT_PLA "Precalentar PLA" -#define MSG_PREHEAT_PLA_SETTINGS "Ajustar temp. PLA" -#define MSG_PREHEAT_ABS "Precalentar ABS" -#define MSG_PREHEAT_ABS_SETTINGS "Ajustar temp. ABS" -#define MSG_COOLDOWN "Enfriar" -#define MSG_SWITCH_PS_ON "Switch Power On" -#define MSG_SWITCH_PS_OFF "Switch Power Off" -#define MSG_EXTRUDE "Extruir" -#define MSG_RETRACT "Retraer" -#define MSG_MOVE_AXIS "Mover Ejes" -#define MSG_SPEED "Velocidad" -#define MSG_NOZZLE "Nozzle" -#define MSG_NOZZLE1 "Nozzle2" -#define MSG_NOZZLE2 "Nozzle3" -#define MSG_BED "Base" -#define MSG_FAN_SPEED "Ventilador" -#define MSG_FLOW "Flujo" -#define MSG_CONTROL "Control" -#define MSG_MIN "\002 Min" -#define MSG_MAX "\002 Max" -#define MSG_FACTOR "\002 Fact" -#define MSG_AUTOTEMP "Autotemp" -#define MSG_ON "On" -#define MSG_OFF "Off" -#define MSG_PID_P "PID-P" -#define MSG_PID_I "PID-I" -#define MSG_PID_D "PID-D" -#define MSG_PID_C "PID-C" -#define MSG_ACC "Acel" -#define MSG_VXY_JERK "Vxy-jerk" -#define MSG_VZ_JERK "Vz-jerk" -#define MSG_VE_JERK "Ve-jerk" -#define MSG_VMAX "Vmax" -#define MSG_X "x" -#define MSG_Y "y" -#define MSG_Z "z" -#define MSG_E "e" -#define MSG_VMIN "Vmin" -#define MSG_VTRAV_MIN "VTrav min" -#define MSG_AMAX "Amax" -#define MSG_A_RETRACT "A-retrac." -#define MSG_XSTEPS "X pasos/mm" -#define MSG_YSTEPS "Y pasos/mm" -#define MSG_ZSTEPS "Z pasos/mm" -#define MSG_ESTEPS "E pasos/mm" -#define MSG_RECTRACT "Retraer" -#define MSG_TEMPERATURE "Temperatura" -#define MSG_MOTION "Movimiento" -#define MSG_STORE_EPROM "Guardar Memoria" -#define MSG_LOAD_EPROM "Cargar Memoria" -#define MSG_RESTORE_FAILSAFE "Rest. de emergencia" -#define MSG_REFRESH "Volver a cargar" -#define MSG_WATCH "Monitorizar" -#define MSG_PREPARE "Preparar" -#define MSG_TUNE "Ajustar" -#define MSG_PAUSE_PRINT "Pausar Impresion" -#define MSG_RESUME_PRINT "Reanudar Impresion" -#define MSG_STOP_PRINT "Detener Impresion" -#define MSG_CARD_MENU "Menu de SD" -#define MSG_NO_CARD "No hay Tarjeta SD" -#define MSG_DWELL "Reposo..." -#define MSG_USERWAIT "Esperando Ordenes..." -#define MSG_RESUMING "Resumiendo Impresion" -#define MSG_NO_MOVE "Sin movimiento" -#define MSG_KILLED "PARADA DE EMERGENCIA. " -#define MSG_STOPPED "PARADA." -#define MSG_CONTROL_RETRACT "Retraer mm" -#define MSG_CONTROL_RETRACTF "Retraer F" -#define MSG_CONTROL_RETRACT_ZLIFT "Levantar mm" -#define MSG_CONTROL_RETRACT_RECOVER "DesRet +mm" -#define MSG_CONTROL_RETRACT_RECOVERF "DesRet F" -#define MSG_AUTORETRACT "AutoRetr." -#define MSG_FILAMENTCHANGE "Change filament" -#define MSG_INIT_SDCARD "Iniciando. Tarjeta-SD" -#define MSG_CNG_SDCARD "Cambiar Tarjeta-SD" -#define MSG_RECTRACT_WIDE "Retraer" -#define MSG_TEMPERATURE_WIDE "Temperatura" -#define MSG_TEMPERATURE_RTN "Temperatura" -#define MSG_MAIN_WIDE "Menu Principal" -#define MSG_MOTION_WIDE "Movimiento" -#define MSG_PREPARE_ALT "Preparar" -#define MSG_CONTROL_ARROW "Control" -#define MSG_RETRACT_ARROW "Retraer" -#define MSG_PART_RELEASE "Desacople Parcial" -#define MSG_STEPPER_RELEASED "Desacoplada." + #define WELCOME_MSG MACHINE_NAME "Lista." + #define MSG_SD_INSERTED "Tarjeta SD Colocada" + #define MSG_SD_REMOVED "Tarjeta SD Retirada" + #define MSG_MAIN "Menu Principal" + #define MSG_AUTOSTART " Autostart" + #define MSG_DISABLE_STEPPERS "Apagar Motores" + #define MSG_AUTO_HOME "Llevar al Origen" // "Llevar Ejes al Cero" + #define MSG_SET_ORIGIN "Establecer Cero" + #define MSG_PREHEAT_PLA "Precalentar PLA" + #define MSG_PREHEAT_PLA_SETTINGS "Ajustar temp. PLA" + #define MSG_PREHEAT_ABS "Precalentar ABS" + #define MSG_PREHEAT_ABS_SETTINGS "Ajustar temp. ABS" + #define MSG_COOLDOWN "Enfriar" + #define MSG_SWITCH_PS_ON "Switch Power On" + #define MSG_SWITCH_PS_OFF "Switch Power Off" + #define MSG_EXTRUDE "Extruir" + #define MSG_RETRACT "Retraer" + #define MSG_MOVE_AXIS "Mover Ejes" + #define MSG_SPEED "Velocidad" + #define MSG_NOZZLE "Nozzle" + #define MSG_NOZZLE1 "Nozzle2" + #define MSG_NOZZLE2 "Nozzle3" + #define MSG_BED "Base" + #define MSG_FAN_SPEED "Ventilador" + #define MSG_FLOW "Flujo" + #define MSG_CONTROL "Control" + #define MSG_MIN "\002 Min" + #define MSG_MAX "\002 Max" + #define MSG_FACTOR "\002 Fact" + #define MSG_AUTOTEMP "Autotemp" + #define MSG_ON "On" + #define MSG_OFF "Off" + #define MSG_PID_P "PID-P" + #define MSG_PID_I "PID-I" + #define MSG_PID_D "PID-D" + #define MSG_PID_C "PID-C" + #define MSG_ACC "Acel" + #define MSG_VXY_JERK "Vxy-jerk" + #define MSG_VZ_JERK "Vz-jerk" + #define MSG_VE_JERK "Ve-jerk" + #define MSG_VMAX "Vmax" + #define MSG_X "x" + #define MSG_Y "y" + #define MSG_Z "z" + #define MSG_E "e" + #define MSG_VMIN "Vmin" + #define MSG_VTRAV_MIN "VTrav min" + #define MSG_AMAX "Amax" + #define MSG_A_RETRACT "A-retrac." + #define MSG_XSTEPS "X pasos/mm" + #define MSG_YSTEPS "Y pasos/mm" + #define MSG_ZSTEPS "Z pasos/mm" + #define MSG_ESTEPS "E pasos/mm" + #define MSG_RECTRACT "Retraer" + #define MSG_TEMPERATURE "Temperatura" + #define MSG_MOTION "Movimiento" + #define MSG_STORE_EPROM "Guardar Memoria" + #define MSG_LOAD_EPROM "Cargar Memoria" + #define MSG_RESTORE_FAILSAFE "Rest. de emergencia" + #define MSG_REFRESH "Volver a cargar" + #define MSG_WATCH "Monitorizar" + #define MSG_PREPARE "Preparar" + #define MSG_TUNE "Ajustar" + #define MSG_PAUSE_PRINT "Pausar Impresion" + #define MSG_RESUME_PRINT "Reanudar Impresion" + #define MSG_STOP_PRINT "Detener Impresion" + #define MSG_CARD_MENU "Menu de SD" + #define MSG_NO_CARD "No hay Tarjeta SD" + #define MSG_DWELL "Reposo..." + #define MSG_USERWAIT "Esperando Ordenes..." + #define MSG_RESUMING "Resumiendo Impresion" + #define MSG_NO_MOVE "Sin movimiento" + #define MSG_KILLED "PARADA DE EMERGENCIA. " + #define MSG_STOPPED "PARADA." + #define MSG_CONTROL_RETRACT "Retraer mm" + #define MSG_CONTROL_RETRACTF "Retraer F" + #define MSG_CONTROL_RETRACT_ZLIFT "Levantar mm" + #define MSG_CONTROL_RETRACT_RECOVER "DesRet +mm" + #define MSG_CONTROL_RETRACT_RECOVERF "DesRet F" + #define MSG_AUTORETRACT "AutoRetr." + #define MSG_FILAMENTCHANGE "Change filament" + #define MSG_INIT_SDCARD "Iniciando. Tarjeta-SD" + #define MSG_CNG_SDCARD "Cambiar Tarjeta-SD" + #define MSG_RECTRACT_WIDE "Retraer" + #define MSG_TEMPERATURE_WIDE "Temperatura" + #define MSG_TEMPERATURE_RTN "Temperatura" + #define MSG_MAIN_WIDE "Menu Principal" + #define MSG_MOTION_WIDE "Movimiento" + #define MSG_PREPARE_ALT "Preparar" + #define MSG_CONTROL_ARROW "Control" + #define MSG_RETRACT_ARROW "Retraer" + #define MSG_PART_RELEASE "Desacople Parcial" + #define MSG_STEPPER_RELEASED "Desacoplada." // Serial Console Messages -#define MSG_Enqueing "En cola \"" -#define MSG_POWERUP "PowerUp" -#define MSG_EXTERNAL_RESET " Reset Externo" -#define MSG_BROWNOUT_RESET " Reset por Voltaje Incorrecto" -#define MSG_WATCHDOG_RESET " Reset por Bloqueo" -#define MSG_SOFTWARE_RESET " Reset por Software" -#define MSG_MARLIN "Marlin " -#define MSG_AUTHOR " | Autor: " -#define MSG_CONFIGURATION_VER " Ultima actualizacion: " -#define MSG_FREE_MEMORY " Memoria libre: " -#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: " -#define MSG_OK "ok" -#define MSG_FILE_SAVED "Guardado." -#define MSG_ERR_LINE_NO "El Numero de Linea no es igual al Ultimo Numero de Linea+1, Ultima Linea:" -#define MSG_ERR_CHECKSUM_MISMATCH "el checksum no coincide, Ultima Linea:" -#define MSG_ERR_NO_CHECKSUM "No se pudo hallar el Checksum con el numero de linea, Ultima Linea:" -#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No se hallo el Numero de Linea con el Checksum, Ultima Linea:" -#define MSG_FILE_PRINTED "Impresion terminada" -#define MSG_BEGIN_FILE_LIST "Comienzo de la lista de archivos" -#define MSG_END_FILE_LIST "Fin de la lista de archivos" -#define MSG_M104_INVALID_EXTRUDER "M104 Extrusor Invalido " -#define MSG_M105_INVALID_EXTRUDER "M105 Extrusor Invalido " -#define MSG_M218_INVALID_EXTRUDER "M218 Extrusor Invalido " -#define MSG_ERR_NO_THERMISTORS "No hay termistores - no temp" -#define MSG_M109_INVALID_EXTRUDER "M109 Extrusor Invalido " -#define MSG_HEATING "Calentando..." -#define MSG_HEATING_COMPLETE "Calentamiento Hecho." -#define MSG_BED_HEATING "Calentando la base." -#define MSG_BED_DONE "Base Caliente." -#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n" -#define MSG_COUNT_X " Cuenta X:" -#define MSG_ERR_KILLED "¡¡Impresora Parada con kill()!!" -#define MSG_ERR_STOPPED "¡Impresora parada por errores. Arregle el error y use M999 Para reiniciar!. (La temperatura se reestablece. Ajustela antes de continuar)" -#define MSG_RESEND "Reenviar:" -#define MSG_UNKNOWN_COMMAND "Comando Desconocido:\"" -#define MSG_ACTIVE_EXTRUDER "Extrusor Activo: " -#define MSG_INVALID_EXTRUDER "Extrusor Invalido" -#define MSG_X_MIN "x_min: " -#define MSG_X_MAX "x_max: " -#define MSG_Y_MIN "y_min: " -#define MSG_Y_MAX "y_max: " -#define MSG_Z_MIN "z_min: " -#define MSG_Z_MAX "z_max: " -#define MSG_M119_REPORT "Comprobando fines de carrera." -#define MSG_ENDSTOP_HIT "PULSADO" -#define MSG_ENDSTOP_OPEN "abierto" -#define MSG_HOTEND_OFFSET "Hotend offsets:" -#define MSG_SD_CANT_OPEN_SUBDIR "No se pudo abrir la subcarpeta." -#define MSG_SD_INIT_FAIL "Fallo al iniciar la SD" -#define MSG_SD_VOL_INIT_FAIL "Fallo al montar el volumen" -#define MSG_SD_OPENROOT_FAIL "Fallo al abrir la carpeta raiz" -#define MSG_SD_CARD_OK "Tarjeta SD OK" -#define MSG_SD_WORKDIR_FAIL "Fallo al abrir la carpeta de trabajo" -#define MSG_SD_OPEN_FILE_FAIL "Error al abrir, Archivo: " -#define MSG_SD_FILE_OPENED "Archivo abierto:" -#define MSG_SD_SIZE " Tamaño:" -#define MSG_SD_FILE_SELECTED "Archivo Seleccionado" -#define MSG_SD_WRITE_TO_FILE "Escribiendo en el archivo: " -#define MSG_SD_PRINTING_BYTE "SD imprimiendo el byte " -#define MSG_SD_NOT_PRINTING "No se esta imprimiendo con SD" -#define MSG_SD_ERR_WRITE_TO_FILE "Error al escribir en el archivo" -#define MSG_SD_CANT_ENTER_SUBDIR "No se puede abrir la carpeta:" + #define MSG_Enqueing "En cola \"" + #define MSG_POWERUP "PowerUp" + #define MSG_EXTERNAL_RESET " Reset Externo" + #define MSG_BROWNOUT_RESET " Reset por Voltaje Incorrecto" + #define MSG_WATCHDOG_RESET " Reset por Bloqueo" + #define MSG_SOFTWARE_RESET " Reset por Software" + #define MSG_MARLIN "Marlin " + #define MSG_AUTHOR " | Autor: " + #define MSG_CONFIGURATION_VER " Ultima actualizacion: " + #define MSG_FREE_MEMORY " Memoria libre: " + #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: " + #define MSG_OK "ok" + #define MSG_FILE_SAVED "Guardado." + #define MSG_ERR_LINE_NO "El Numero de Linea no es igual al Ultimo Numero de Linea+1, Ultima Linea:" + #define MSG_ERR_CHECKSUM_MISMATCH "el checksum no coincide, Ultima Linea:" + #define MSG_ERR_NO_CHECKSUM "No se pudo hallar el Checksum con el numero de linea, Ultima Linea:" + #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No se hallo el Numero de Linea con el Checksum, Ultima Linea:" + #define MSG_FILE_PRINTED "Impresion terminada" + #define MSG_BEGIN_FILE_LIST "Comienzo de la lista de archivos" + #define MSG_END_FILE_LIST "Fin de la lista de archivos" + #define MSG_M104_INVALID_EXTRUDER "M104 Extrusor Invalido " + #define MSG_M105_INVALID_EXTRUDER "M105 Extrusor Invalido " + #define MSG_M218_INVALID_EXTRUDER "M218 Extrusor Invalido " + #define MSG_ERR_NO_THERMISTORS "No hay termistores - no temp" + #define MSG_M109_INVALID_EXTRUDER "M109 Extrusor Invalido " + #define MSG_HEATING "Calentando..." + #define MSG_HEATING_COMPLETE "Calentamiento Hecho." + #define MSG_BED_HEATING "Calentando la base." + #define MSG_BED_DONE "Base Caliente." + #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n" + #define MSG_COUNT_X " Cuenta X:" + #define MSG_ERR_KILLED "¡¡Impresora Parada con kill()!!" + #define MSG_ERR_STOPPED "¡Impresora parada por errores. Arregle el error y use M999 Para reiniciar!. (La temperatura se reestablece. Ajustela antes de continuar)" + #define MSG_RESEND "Reenviar:" + #define MSG_UNKNOWN_COMMAND "Comando Desconocido:\"" + #define MSG_ACTIVE_EXTRUDER "Extrusor Activo: " + #define MSG_INVALID_EXTRUDER "Extrusor Invalido" + #define MSG_X_MIN "x_min: " + #define MSG_X_MAX "x_max: " + #define MSG_Y_MIN "y_min: " + #define MSG_Y_MAX "y_max: " + #define MSG_Z_MIN "z_min: " + #define MSG_Z_MAX "z_max: " + #define MSG_M119_REPORT "Comprobando fines de carrera." + #define MSG_ENDSTOP_HIT "PULSADO" + #define MSG_ENDSTOP_OPEN "abierto" + #define MSG_HOTEND_OFFSET "Hotend offsets:" + #define MSG_SD_CANT_OPEN_SUBDIR "No se pudo abrir la subcarpeta." + #define MSG_SD_INIT_FAIL "Fallo al iniciar la SD" + #define MSG_SD_VOL_INIT_FAIL "Fallo al montar el volumen" + #define MSG_SD_OPENROOT_FAIL "Fallo al abrir la carpeta raiz" + #define MSG_SD_CARD_OK "Tarjeta SD OK" + #define MSG_SD_WORKDIR_FAIL "Fallo al abrir la carpeta de trabajo" + #define MSG_SD_OPEN_FILE_FAIL "Error al abrir, Archivo: " + #define MSG_SD_FILE_OPENED "Archivo abierto:" + #define MSG_SD_SIZE " Tamaño:" + #define MSG_SD_FILE_SELECTED "Archivo Seleccionado" + #define MSG_SD_WRITE_TO_FILE "Escribiendo en el archivo: " + #define MSG_SD_PRINTING_BYTE "SD imprimiendo el byte " + #define MSG_SD_NOT_PRINTING "No se esta imprimiendo con SD" + #define MSG_SD_ERR_WRITE_TO_FILE "Error al escribir en el archivo" + #define MSG_SD_CANT_ENTER_SUBDIR "No se puede abrir la carpeta:" -#define MSG_STEPPER_TOO_HIGH "Steprate demasiado alto : " -#define MSG_ENDSTOPS_HIT "Se ha tocado el fin de carril: " -#define MSG_ERR_COLD_EXTRUDE_STOP " extrusion fria evitada" -#define MSG_ERR_LONG_EXTRUDE_STOP " extrusion demasiado larga evitada" + #define MSG_STEPPER_TOO_HIGH "Steprate demasiado alto : " + #define MSG_ENDSTOPS_HIT "Se ha tocado el fin de carril: " + #define MSG_ERR_COLD_EXTRUDE_STOP " extrusion fria evitada" + #define MSG_ERR_LONG_EXTRUDE_STOP " extrusion demasiado larga evitada" #endif #if LANGUAGE_CHOICE == 6 -// LCD Menu Messages -#define WELCOME_MSG MACHINE_NAME " Готов" -#define MSG_SD_INSERTED "Карта вставлена" -#define MSG_SD_REMOVED "Карта извлечена" -#define MSG_MAIN " Меню \003" -#define MSG_AUTOSTART " Автостарт " -#define MSG_DISABLE_STEPPERS " Выключить двигатели" -#define MSG_AUTO_HOME " Парковка " -#define MSG_SET_ORIGIN " Запомнить ноль " -#define MSG_PREHEAT_PLA " Преднагрев PLA " -#define MSG_PREHEAT_PLA_SETTINGS " Настр. преднагр.PLA" -#define MSG_PREHEAT_ABS " Преднагрев ABS " -#define MSG_PREHEAT_ABS_SETTINGS " Настр. преднагр.ABS" -#define MSG_COOLDOWN " Охлаждение " -#define MSG_SWITCH_PS_ON "Switch Power On" -#define MSG_SWITCH_PS_OFF "Switch Power Off" -#define MSG_EXTRUDE " Экструзия " -#define MSG_RETRACT " Откат" -#define MSG_MOVE_AXIS " Движение по осям \x7E" -#define MSG_SPEED " Скорость:" -#define MSG_NOZZLE " \002 Фильера:" -#define MSG_NOZZLE1 " \002 Фильера2:" -#define MSG_NOZZLE2 " \002 Фильера3:" -#define MSG_BED " \002 Кровать:" -#define MSG_FAN_SPEED " Куллер:" -#define MSG_FLOW " Поток:" -#define MSG_CONTROL " Настройки \003" -#define MSG_MIN " \002 Минимум:" -#define MSG_MAX " \002 Максимум:" -#define MSG_FACTOR " \002 Фактор:" -#define MSG_AUTOTEMP " Autotemp:" -#define MSG_ON "Вкл. " -#define MSG_OFF "Выкл. " -#define MSG_PID_P " PID-P: " -#define MSG_PID_I " PID-I: " -#define MSG_PID_D " PID-D: " -#define MSG_PID_C " PID-C: " -#define MSG_ACC " Acc:" -#define MSG_VXY_JERK " Vxy-jerk: " -#define MSG_VZ_JERK "Vz-jerk" -#define MSG_VE_JERK "Ve-jerk" -#define MSG_VMAX " Vmax " -#define MSG_X "x:" -#define MSG_Y "y:" -#define MSG_Z "z:" -#define MSG_E "e:" -#define MSG_VMIN " Vmin:" -#define MSG_VTRAV_MIN " VTrav min:" -#define MSG_AMAX " Amax " -#define MSG_A_RETRACT " A-retract:" -#define MSG_XSTEPS " X шаг/mm:" -#define MSG_YSTEPS " Y шаг/mm:" -#define MSG_ZSTEPS " Z шаг/mm:" -#define MSG_ESTEPS " E шаг/mm:" -#define MSG_RECTRACT " Откат подачи \x7E" -#define MSG_TEMPERATURE " Температура \x7E" -#define MSG_MOTION " Скорости \x7E" - #define MSG_CONTRAST "LCD contrast" -#define MSG_STORE_EPROM " Сохранить настройки" -#define MSG_LOAD_EPROM " Загрузить настройки" -#define MSG_RESTORE_FAILSAFE " Сброс настроек " -#define MSG_REFRESH "\004Обновить " -#define MSG_WATCH " Обзор \003" -#define MSG_PREPARE " Действия \x7E" -#define MSG_TUNE " Настройки \x7E" -#define MSG_PAUSE_PRINT " Пауза печати \x7E" -#define MSG_RESUME_PRINT " Продолжить печать \x7E" -#define MSG_STOP_PRINT " Остановить печать \x7E" -#define MSG_CARD_MENU " Меню карты \x7E" -#define MSG_NO_CARD " Нет карты" -#define MSG_DWELL "Сон..." -#define MSG_USERWAIT "Нажмите для продолж." -#define MSG_RESUMING "Resuming print" -#define MSG_NO_MOVE "Нет движения. " -#define MSG_PART_RELEASE " Извлечение принта " -#define MSG_KILLED "УБИТО. " -#define MSG_STOPPED "ОСТАНОВЛЕНО. " -#define MSG_CONTROL_RETRACT " Откат mm:" -#define MSG_CONTROL_RETRACTF " Откат F:" -#define MSG_CONTROL_RETRACT_ZLIFT " Прыжок mm:" -#define MSG_CONTROL_RETRACT_RECOVER " Возврат +mm:" -#define MSG_CONTROL_RETRACT_RECOVERF " Возврат F:" -#define MSG_AUTORETRACT " АвтоОткат:" -#define MSG_FILAMENTCHANGE "Change filament" -#define MSG_INIT_SDCARD "Init. SD-Card" -#define MSG_CNG_SDCARD "Change SD-Card" + // LCD Menu Messages + #define WELCOME_MSG MACHINE_NAME " Готов" + #define MSG_SD_INSERTED "Карта вставлена" + #define MSG_SD_REMOVED "Карта извлечена" + #define MSG_MAIN " Меню \003" + #define MSG_AUTOSTART " Автостарт " + #define MSG_DISABLE_STEPPERS " Выключить двигатели" + #define MSG_AUTO_HOME " Парковка " + #define MSG_SET_ORIGIN " Запомнить ноль " + #define MSG_PREHEAT_PLA " Преднагрев PLA " + #define MSG_PREHEAT_PLA_SETTINGS " Настр. преднагр.PLA" + #define MSG_PREHEAT_ABS " Преднагрев ABS " + #define MSG_PREHEAT_ABS_SETTINGS " Настр. преднагр.ABS" + #define MSG_COOLDOWN " Охлаждение " + #define MSG_SWITCH_PS_ON "Switch Power On" + #define MSG_SWITCH_PS_OFF "Switch Power Off" + #define MSG_EXTRUDE " Экструзия " + #define MSG_RETRACT " Откат" + #define MSG_MOVE_AXIS " Движение по осям \x7E" + #define MSG_SPEED " Скорость:" + #define MSG_NOZZLE " \002 Фильера:" + #define MSG_NOZZLE1 " \002 Фильера2:" + #define MSG_NOZZLE2 " \002 Фильера3:" + #define MSG_BED " \002 Кровать:" + #define MSG_FAN_SPEED " Куллер:" + #define MSG_FLOW " Поток:" + #define MSG_CONTROL " Настройки \003" + #define MSG_MIN " \002 Минимум:" + #define MSG_MAX " \002 Максимум:" + #define MSG_FACTOR " \002 Фактор:" + #define MSG_AUTOTEMP " Autotemp:" + #define MSG_ON "Вкл. " + #define MSG_OFF "Выкл. " + #define MSG_PID_P " PID-P: " + #define MSG_PID_I " PID-I: " + #define MSG_PID_D " PID-D: " + #define MSG_PID_C " PID-C: " + #define MSG_ACC " Acc:" + #define MSG_VXY_JERK " Vxy-jerk: " + #define MSG_VZ_JERK "Vz-jerk" + #define MSG_VE_JERK "Ve-jerk" + #define MSG_VMAX " Vmax " + #define MSG_X "x:" + #define MSG_Y "y:" + #define MSG_Z "z:" + #define MSG_E "e:" + #define MSG_VMIN " Vmin:" + #define MSG_VTRAV_MIN " VTrav min:" + #define MSG_AMAX " Amax " + #define MSG_A_RETRACT " A-retract:" + #define MSG_XSTEPS " X шаг/mm:" + #define MSG_YSTEPS " Y шаг/mm:" + #define MSG_ZSTEPS " Z шаг/mm:" + #define MSG_ESTEPS " E шаг/mm:" + #define MSG_RECTRACT " Откат подачи \x7E" + #define MSG_TEMPERATURE " Температура \x7E" + #define MSG_MOTION " Скорости \x7E" + #define MSG_CONTRAST "LCD contrast" + #define MSG_STORE_EPROM " Сохранить настройки" + #define MSG_LOAD_EPROM " Загрузить настройки" + #define MSG_RESTORE_FAILSAFE " Сброс настроек " + #define MSG_REFRESH "\004Обновить " + #define MSG_WATCH " Обзор \003" + #define MSG_PREPARE " Действия \x7E" + #define MSG_TUNE " Настройки \x7E" + #define MSG_PAUSE_PRINT " Пауза печати \x7E" + #define MSG_RESUME_PRINT " Продолжить печать \x7E" + #define MSG_STOP_PRINT " Остановить печать \x7E" + #define MSG_CARD_MENU " Меню карты \x7E" + #define MSG_NO_CARD " Нет карты" + #define MSG_DWELL "Сон..." + #define MSG_USERWAIT "Нажмите для продолж." + #define MSG_RESUMING "Resuming print" + #define MSG_NO_MOVE "Нет движения. " + #define MSG_PART_RELEASE " Извлечение принта " + #define MSG_KILLED "УБИТО. " + #define MSG_STOPPED "ОСТАНОВЛЕНО. " + #define MSG_CONTROL_RETRACT " Откат mm:" + #define MSG_CONTROL_RETRACTF " Откат F:" + #define MSG_CONTROL_RETRACT_ZLIFT " Прыжок mm:" + #define MSG_CONTROL_RETRACT_RECOVER " Возврат +mm:" + #define MSG_CONTROL_RETRACT_RECOVERF " Возврат F:" + #define MSG_AUTORETRACT " АвтоОткат:" + #define MSG_FILAMENTCHANGE "Change filament" + #define MSG_INIT_SDCARD "Init. SD-Card" + #define MSG_CNG_SDCARD "Change SD-Card" // Serial Console Messages -#define MSG_Enqueing "Запланировано \"" -#define MSG_POWERUP "Включение питания" -#define MSG_EXTERNAL_RESET " Внешний сброс" -#define MSG_BROWNOUT_RESET " Brown out сброс" -#define MSG_WATCHDOG_RESET " Watchdog сброс" -#define MSG_SOFTWARE_RESET " программный сброс" -#define MSG_MARLIN "Marlin " -#define MSG_AUTHOR " | Автор: " -#define MSG_CONFIGURATION_VER " Последнее обновление: " -#define MSG_FREE_MEMORY " Памяти свободно: " -#define MSG_PLANNER_BUFFER_BYTES " Буффер очереди команд Bytes: " -#define MSG_OK "ok" -#define MSG_FILE_SAVED "Файл записан." -#define MSG_ERR_LINE_NO "Номен строки это не последняя строка+1, последняя строка:" -#define MSG_ERR_CHECKSUM_MISMATCH "контрольная сумма не совпадает, последняя строка:" -#define MSG_ERR_NO_CHECKSUM "нет контрольной суммы для строки, последняя строка:" -#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "нет строки для контрольной суммы, последняя строка:" -#define MSG_FILE_PRINTED "Печать файла завершена" -#define MSG_BEGIN_FILE_LIST "Список файлов" -#define MSG_END_FILE_LIST "Конец списка файлов" -#define MSG_M104_INVALID_EXTRUDER "M104 ошибка экструдера " -#define MSG_M105_INVALID_EXTRUDER "M105 ошибка экструдера " -#define MSG_M218_INVALID_EXTRUDER "M218 ошибка экструдера " -#define MSG_ERR_NO_THERMISTORS "Нет термистра - нет температуры" -#define MSG_M109_INVALID_EXTRUDER "M109 ошибка экструдера " -#define MSG_HEATING "Нагрев... " -#define MSG_HEATING_COMPLETE "Наргето. " -#define MSG_BED_HEATING "Нагрев стола... " -#define MSG_BED_DONE "Стол нагрет. " -#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n" -#define MSG_COUNT_X " Count X:" -#define MSG_ERR_KILLED "Принтер остановлен. вызов kill() !!" -#define MSG_ERR_STOPPED "Ошибка принтера, останов. Устраните неисправность и используйте M999 для перезагрузки!. (Температура недоступна. Проверьте датчики)" -#define MSG_RESEND "Переотправка:" -#define MSG_UNKNOWN_COMMAND "Неизвестная команда:\"" -#define MSG_ACTIVE_EXTRUDER "Активный экструдер: " -#define MSG_INVALID_EXTRUDER "Ошибка экструдера" -#define MSG_X_MIN "x_min:" -#define MSG_X_MAX "x_max:" -#define MSG_Y_MIN "y_min:" -#define MSG_Y_MAX "y_max:" -#define MSG_Z_MIN "z_min:" -#define MSG_Z_MAX "z_max:" -#define MSG_M119_REPORT "Статус концевиков" -#define MSG_ENDSTOP_HIT "Срабатывание концевика" -#define MSG_ENDSTOP_OPEN "Концевик освобожден" -#define MSG_HOTEND_OFFSET "Hotend offsets:" -#define MSG_SD_CANT_OPEN_SUBDIR "Не открыть папку" -#define MSG_SD_INIT_FAIL "Ошибка инициализации SD" -#define MSG_SD_VOL_INIT_FAIL "Ошибка инициализации раздела" -#define MSG_SD_OPENROOT_FAIL "Не прочесть содержимое корня" -#define MSG_SD_CARD_OK "SD карта в порядке" -#define MSG_SD_WORKDIR_FAIL "не открыть рабочую папку" -#define MSG_SD_OPEN_FILE_FAIL "Ошибка чтения, файл: " -#define MSG_SD_FILE_OPENED "Файл открыт:" -#define MSG_SD_SIZE " Размер:" -#define MSG_SD_FILE_SELECTED "Файл выбран" -#define MSG_SD_WRITE_TO_FILE "Запись в файл: " -#define MSG_SD_PRINTING_BYTE "SD печать byte " -#define MSG_SD_NOT_PRINTING "нет SD печати" -#define MSG_SD_ERR_WRITE_TO_FILE "ошибка записи в файл" -#define MSG_SD_CANT_ENTER_SUBDIR "Не зайти в папку:" -#define MSG_STEPPER_TOO_HIGH "Частота шагов очень высока : " -#define MSG_ENDSTOPS_HIT "концевик сработал: " -#define MSG_ERR_COLD_EXTRUDE_STOP " защита холодной экструзии" -#define MSG_ERR_LONG_EXTRUDE_STOP " защита превышения длинны экструзии" + #define MSG_Enqueing "Запланировано \"" + #define MSG_POWERUP "Включение питания" + #define MSG_EXTERNAL_RESET " Внешний сброс" + #define MSG_BROWNOUT_RESET " Brown out сброс" + #define MSG_WATCHDOG_RESET " Watchdog сброс" + #define MSG_SOFTWARE_RESET " программный сброс" + #define MSG_MARLIN "Marlin " + #define MSG_AUTHOR " | Автор: " + #define MSG_CONFIGURATION_VER " Последнее обновление: " + #define MSG_FREE_MEMORY " Памяти свободно: " + #define MSG_PLANNER_BUFFER_BYTES " Буффер очереди команд Bytes: " + #define MSG_OK "ok" + #define MSG_FILE_SAVED "Файл записан." + #define MSG_ERR_LINE_NO "Номен строки это не последняя строка+1, последняя строка:" + #define MSG_ERR_CHECKSUM_MISMATCH "контрольная сумма не совпадает, последняя строка:" + #define MSG_ERR_NO_CHECKSUM "нет контрольной суммы для строки, последняя строка:" + #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "нет строки для контрольной суммы, последняя строка:" + #define MSG_FILE_PRINTED "Печать файла завершена" + #define MSG_BEGIN_FILE_LIST "Список файлов" + #define MSG_END_FILE_LIST "Конец списка файлов" + #define MSG_M104_INVALID_EXTRUDER "M104 ошибка экструдера " + #define MSG_M105_INVALID_EXTRUDER "M105 ошибка экструдера " + #define MSG_M218_INVALID_EXTRUDER "M218 ошибка экструдера " + #define MSG_ERR_NO_THERMISTORS "Нет термистра - нет температуры" + #define MSG_M109_INVALID_EXTRUDER "M109 ошибка экструдера " + #define MSG_HEATING "Нагрев... " + #define MSG_HEATING_COMPLETE "Наргето. " + #define MSG_BED_HEATING "Нагрев стола... " + #define MSG_BED_DONE "Стол нагрет. " + #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n" + #define MSG_COUNT_X " Count X:" + #define MSG_ERR_KILLED "Принтер остановлен. вызов kill() !!" + #define MSG_ERR_STOPPED "Ошибка принтера, останов. Устраните неисправность и используйте M999 для перезагрузки!. (Температура недоступна. Проверьте датчики)" + #define MSG_RESEND "Переотправка:" + #define MSG_UNKNOWN_COMMAND "Неизвестная команда:\"" + #define MSG_ACTIVE_EXTRUDER "Активный экструдер: " + #define MSG_INVALID_EXTRUDER "Ошибка экструдера" + #define MSG_X_MIN "x_min:" + #define MSG_X_MAX "x_max:" + #define MSG_Y_MIN "y_min:" + #define MSG_Y_MAX "y_max:" + #define MSG_Z_MIN "z_min:" + #define MSG_Z_MAX "z_max:" + #define MSG_M119_REPORT "Статус концевиков" + #define MSG_ENDSTOP_HIT "Срабатывание концевика" + #define MSG_ENDSTOP_OPEN "Концевик освобожден" + #define MSG_HOTEND_OFFSET "Hotend offsets:" + #define MSG_SD_CANT_OPEN_SUBDIR "Не открыть папку" + #define MSG_SD_INIT_FAIL "Ошибка инициализации SD" + #define MSG_SD_VOL_INIT_FAIL "Ошибка инициализации раздела" + #define MSG_SD_OPENROOT_FAIL "Не прочесть содержимое корня" + #define MSG_SD_CARD_OK "SD карта в порядке" + #define MSG_SD_WORKDIR_FAIL "не открыть рабочую папку" + #define MSG_SD_OPEN_FILE_FAIL "Ошибка чтения, файл: " + #define MSG_SD_FILE_OPENED "Файл открыт:" + #define MSG_SD_SIZE " Размер:" + #define MSG_SD_FILE_SELECTED "Файл выбран" + #define MSG_SD_WRITE_TO_FILE "Запись в файл: " + #define MSG_SD_PRINTING_BYTE "SD печать byte " + #define MSG_SD_NOT_PRINTING "нет SD печати" + #define MSG_SD_ERR_WRITE_TO_FILE "ошибка записи в файл" + #define MSG_SD_CANT_ENTER_SUBDIR "Не зайти в папку:" + #define MSG_STEPPER_TOO_HIGH "Частота шагов очень высока : " + #define MSG_ENDSTOPS_HIT "концевик сработал: " + #define MSG_ERR_COLD_EXTRUDE_STOP " защита холодной экструзии" + #define MSG_ERR_LONG_EXTRUDE_STOP " защита превышения длинны экструзии" #endif From 76841450c83ed013d1d2fc3f8b8ac8e09d95b75f Mon Sep 17 00:00:00 2001 From: Guillaume Seguin Date: Tue, 23 Jul 2013 22:28:30 +0200 Subject: [PATCH 11/11] Only display poweron/poweroff if PS_ON_PIN > -1 --- Marlin/ultralcd.cpp | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Marlin/ultralcd.cpp b/Marlin/ultralcd.cpp index 69e5201f77..f6fc82d40c 100644 --- a/Marlin/ultralcd.cpp +++ b/Marlin/ultralcd.cpp @@ -349,12 +349,14 @@ static void lcd_prepare_menu() MENU_ITEM(function, MSG_PREHEAT_PLA, lcd_preheat_pla); MENU_ITEM(function, MSG_PREHEAT_ABS, lcd_preheat_abs); MENU_ITEM(function, MSG_COOLDOWN, lcd_cooldown); +#if PS_ON_PIN > -1 if (powersupply) { MENU_ITEM(gcode, MSG_SWITCH_PS_OFF, PSTR("M81")); }else{ MENU_ITEM(gcode, MSG_SWITCH_PS_ON, PSTR("M80")); } +#endif MENU_ITEM(submenu, MSG_MOVE_AXIS, lcd_move_menu); END_MENU(); }