HAL tweaks to LPC1768 main

This commit is contained in:
Scott Lahteine 2018-08-22 17:15:32 -05:00
parent 0987ed2a18
commit ba1919c1eb

View File

@ -7,7 +7,7 @@ extern void setup();
extern void loop();
extern "C" {
#include <lpc17xx_gpio.h>
#include <lpc17xx_gpio.h>
}
#include <usb/usb.h>
@ -19,9 +19,9 @@ extern "C" {
#include <usb/mscuser.h>
extern "C" {
#include <debug_frmwrk.h>
#include <chanfs/diskio.h>
#include <chanfs/ff.h>
#include <debug_frmwrk.h>
#include <chanfs/diskio.h>
#include <chanfs/ff.h>
}
#include "../../inc/MarlinConfig.h"
@ -62,12 +62,12 @@ extern "C" {
_millis = 0; // Initialize the millisecond counter value
SysTick_Config(SystemCoreClock / 1000); // Start millisecond global counter
// Runs before setup() need to configure LED_PIN and use to indicate succsessful bootloader execution
// Runs before setup() to configure LED_PIN and used to indicate successful bootloader execution
#if PIN_EXISTS(LED)
SET_DIR_OUTPUT(LED_PIN);
WRITE_PIN_CLR(LED_PIN);
//MKS-SBASE has 3 other LEDS the bootloader uses during flashing, clear them
// MKS_SBASE has 3 other LEDs the bootloader uses during flashing. Clear them.
SET_DIR_OUTPUT(P1_19);
WRITE_PIN_CLR(P1_19);
SET_DIR_OUTPUT(P1_20);
@ -75,7 +75,7 @@ extern "C" {
SET_DIR_OUTPUT(P1_21);
WRITE_PIN_CLR(P1_21);
for (int i = 0; i < 6; ++i) {
for (uint8_t i = 6; i--;) {
TOGGLE(LED_PIN);
delay(100);
}