MPCNC/Firmware2
1
0
Fork 0
Code Issues 1 Pull Requests Releases Wiki Activity

Various fixes for ESP32 (#14102)

Browse Source
This commit is contained in:
felixstorm 2019-05-26 00:06:00 +02:00 committed by Scott Lahteine
parent e1bf34bdc9
commit bc5a1fe562
10 changed files with 99 additions and 49 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

73
Marlin/src/HAL/HAL_ESP32/HAL.cpp
View File

@ -33,6 +33,10 @@
#include "../../inc/MarlinConfigPre.h"
#if EITHER(EEPROM_SETTINGS, WEBSUPPORT)
#include "spiffs.h"
#endif
#if ENABLED(WIFISUPPORT)
#include <ESPAsyncWebServer.h>
#include "wifi.h"
@ -41,10 +45,7 @@
#endif
#if ENABLED(WEBSUPPORT)
#include "web.h"
#include "spiffs.h"
#endif
#elif ENABLED(EEPROM_SETTINGS)
#include "spiffs.h"
#endif
// --------------------------------------------------------------------------
@ -92,21 +93,24 @@ esp_adc_cal_characteristics_t characteristics;
// --------------------------------------------------------------------------
void HAL_init(void) {
i2s_init();
}
void HAL_init_board(void) {
#if EITHER(EEPROM_SETTINGS, WEBSUPPORT)
spiffs_init();
#endif
#if ENABLED(WIFISUPPORT)
wifi_init();
#if ENABLED(OTASUPPORT)
OTA_init();
#endif
#if ENABLED(WEBSUPPORT)
spiffs_init();
web_init();
#endif
server.begin();
#elif ENABLED(EEPROM_SETTINGS)
spiffs_init();
#endif
i2s_init();
}
void HAL_idletask(void) {
@ -117,18 +121,12 @@ void HAL_idletask(void) {
void HAL_clear_reset_source(void) { }
uint8_t HAL_get_reset_source(void) {
return rtc_get_reset_reason(1);
}
uint8_t HAL_get_reset_source(void) { return rtc_get_reset_reason(1); }
void _delay_ms(int delay_ms) {
delay(delay_ms);
}
void _delay_ms(int delay_ms) { delay(delay_ms); }
// return free memory between end of heap (or end bss) and whatever is current
int freeMemory() {
return ESP.getFreeHeap();
}
int freeMemory() { return ESP.getFreeHeap(); }
// --------------------------------------------------------------------------
// ADC
@ -144,19 +142,41 @@ adc1_channel_t get_channel(int pin) {
case 33: return ADC1_CHANNEL(33);
case 32: return ADC1_CHANNEL(32);
}
return ADC1_CHANNEL_MAX;
}
void HAL_adc_init() {
// Configure ADC
adc1_config_width(ADC_WIDTH_12Bit);
adc1_config_channel_atten(get_channel(39), ADC_ATTEN_11db);
adc1_config_channel_atten(get_channel(36), ADC_ATTEN_11db);
adc1_config_channel_atten(get_channel(35), ADC_ATTEN_11db);
adc1_config_channel_atten(get_channel(34), ADC_ATTEN_11db);
adc1_config_channel_atten(get_channel(33), ADC_ATTEN_11db);
adc1_config_channel_atten(get_channel(32), ADC_ATTEN_11db);
// Configure channels only if used as (re-)configuring a pin for ADC that is used elsewhere might have adverse effects
#if HAS_TEMP_ADC_0
adc1_config_channel_atten(get_channel(TEMP_0_PIN), ADC_ATTEN_11db);
#endif
#if HAS_TEMP_ADC_1
adc1_config_channel_atten(get_channel(TEMP_1_PIN), ADC_ATTEN_11db);
#endif
#if HAS_TEMP_ADC_2
adc1_config_channel_atten(get_channel(TEMP_2_PIN), ADC_ATTEN_11db);
#endif
#if HAS_TEMP_ADC_3
adc1_config_channel_atten(get_channel(TEMP_3_PIN), ADC_ATTEN_11db);
#endif
#if HAS_TEMP_ADC_4
adc1_config_channel_atten(get_channel(TEMP_4_PIN), ADC_ATTEN_11db);
#endif
#if HAS_TEMP_ADC_5
adc1_config_channel_atten(get_channel(TEMP_5_PIN), ADC_ATTEN_11db);
#endif
#if HAS_HEATED_BED
adc1_config_channel_atten(get_channel(TEMP_BED_PIN), ADC_ATTEN_11db);
#endif
#if HAS_TEMP_CHAMBER
adc1_config_channel_atten(get_channel(TEMP_CHAMBER_PIN), ADC_ATTEN_11db);
#endif
#if ENABLED(FILAMENT_WIDTH_SENSOR)
adc1_config_channel_atten(get_channel(FILWIDTH_PIN), ADC_ATTEN_11db);
#endif
// Note that adc2 is shared with the WiFi module, which has higher priority, so the conversion may fail.
// That's why we're not setting it up here.
@ -172,9 +192,9 @@ void HAL_adc_start_conversion(uint8_t adc_pin) {
HAL_adc_result = mv*1023.0/3300.0;
}
int pin_to_channel[40] = {};
int cnt_channel = 1;
void analogWrite(int pin, int value) {
static int cnt_channel = 1,
pin_to_channel[40] = {};
if (pin_to_channel[pin] == 0) {
ledcAttachPin(pin, cnt_channel);
ledcSetup(cnt_channel, 490, 8);
@ -185,4 +205,5 @@ void analogWrite(int pin, int value) {
ledcWrite(pin_to_channel[pin], value);
}
#endif // ARDUINO_ARCH_ESP32

2
Marlin/src/HAL/HAL_ESP32/HAL.h
View File

@ -122,5 +122,7 @@ void HAL_adc_start_conversion(uint8_t adc_pin);
// Enable hooks into idle and setup for HAL
#define HAL_IDLETASK 1
#define HAL_INIT 1
#define BOARD_INIT() HAL_init_board();
void HAL_idletask(void);
void HAL_init(void);
void HAL_init_board(void);

10
Marlin/src/HAL/HAL_ESP32/HAL_timers_ESP32.cpp
View File

@ -132,7 +132,7 @@ void HAL_timer_start(const uint8_t timer_num, uint32_t frequency) {
timer_enable_intr(timer.group, timer.idx);
// TODO need to deal with timer_group1_isr
timer_isr_register(timer.group, timer.idx, timer_group0_isr, (void*)timer.idx, ESP_INTR_FLAG_INTRDISABLED, nullptr);
timer_isr_register(timer.group, timer.idx, timer_group0_isr, (void*)timer.idx, 0, nullptr);
timer_start(timer.group, timer.idx);
}
@ -169,10 +169,8 @@ hal_timer_t HAL_timer_get_compare(const uint8_t timer_num) {
*/
hal_timer_t HAL_timer_get_count(const uint8_t timer_num) {
const tTimerConfig timer = TimerConfig[timer_num];
uint64_t counter_value;
timer_get_counter_value(timer.group, timer.idx, &counter_value);
return counter_value;
}
@ -181,7 +179,7 @@ hal_timer_t HAL_timer_get_count(const uint8_t timer_num) {
* @param timer_num timer number to enable interrupts on
*/
void HAL_timer_enable_interrupt(const uint8_t timer_num) {
const tTimerConfig timer = TimerConfig[timer_num];
//const tTimerConfig timer = TimerConfig[timer_num];
//timer_enable_intr(timer.group, timer.idx);
}
@ -190,8 +188,8 @@ void HAL_timer_enable_interrupt(const uint8_t timer_num) {
* @param timer_num timer number to disable interrupts on
*/
void HAL_timer_disable_interrupt(const uint8_t timer_num) {
const tTimerConfig timer = TimerConfig[timer_num];
// timer_disable_intr(timer.group, timer.idx);
//const tTimerConfig timer = TimerConfig[timer_num];
//timer_disable_intr(timer.group, timer.idx);
}
bool HAL_timer_interrupt_enabled(const uint8_t timer_num) {

5
Marlin/src/HAL/HAL_ESP32/HAL_timers_ESP32.h
View File

@ -28,6 +28,11 @@
#include <stdint.h>
#include "driver/timer.h"
// Includes needed to get I2S_STEPPER_STREAM. Note that pins.h
// is included in case this header is being included early.
#include "../../inc/MarlinConfig.h"
#include "../../pins/pins.h"
// --------------------------------------------------------------------------
// Defines
// --------------------------------------------------------------------------

4
Marlin/src/HAL/HAL_ESP32/WebSocketSerial.cpp
View File

@ -38,9 +38,9 @@ AsyncWebSocket ws("/ws"); // TODO Move inside the class.
RingBuffer::RingBuffer(ring_buffer_pos_t size)
: data(new uint8_t[size]),
size(size),
read_index(0),
write_index(0),
size(size)
write_index(0)
{}
RingBuffer::~RingBuffer() { delete[] data; }

27
Marlin/src/HAL/HAL_ESP32/persistent_store_spiffs.cpp
View File

@ -28,25 +28,38 @@
#include "../shared/persistent_store_api.h"
#include "SPIFFS.h"
#include "FS.h"
#include <SPIFFS.h>
#include <FS.h>
#include "spiffs.h"
#define HAL_ESP32_EEPROM_SIZE 4096
#define HAL_ESP32_EEPROM_FILE_PATH "/eeprom.dat"
File eeprom_file;
bool PersistentStore::access_start() {
if (spiffs_initialized) {
eeprom_file = SPIFFS.open("/eeprom.dat", "r+");
eeprom_file = SPIFFS.open(HAL_ESP32_EEPROM_FILE_PATH, "r+");
size_t file_size = eeprom_file.size();
if (file_size < HAL_ESP32_EEPROM_SIZE) {
bool write_ok = eeprom_file.seek(file_size);
SERIAL_ECHO_MSG("SPIFFS EEPROM settings file " HAL_ESP32_EEPROM_FILE_PATH " is too small or did not exist, expanding.");
SERIAL_ECHO_START(); SERIAL_ECHOLNPAIR(" file size: ", file_size, ", required size: ", HAL_ESP32_EEPROM_SIZE);
while (write_ok && file_size < HAL_ESP32_EEPROM_SIZE) {
write_ok = eeprom_file.write(0xFF) == 1;
file_size++;
// mode r+ does not allow to expand the file (at least on ESP32 SPIFFS9, so we close, reopen "a", append, close, reopen "r+"
eeprom_file.close();
eeprom_file = SPIFFS.open(HAL_ESP32_EEPROM_FILE_PATH, "a");
for (size_t i = eeprom_file.size(); i < HAL_ESP32_EEPROM_SIZE; i++)
eeprom_file.write(0xFF);
eeprom_file.close();
eeprom_file = SPIFFS.open(HAL_ESP32_EEPROM_FILE_PATH, "r+");
file_size = eeprom_file.size();
if (file_size < HAL_ESP32_EEPROM_SIZE) {
SERIAL_ERROR_MSG("Failed to expand " HAL_ESP32_EEPROM_FILE_PATH " to required size. SPIFFS partition full?");
SERIAL_ERROR_START(); SERIAL_ECHOLNPAIR(" file size: ", file_size, ", required size: ", HAL_ESP32_EEPROM_SIZE);
SERIAL_ERROR_START(); SERIAL_ECHOLNPAIR(" SPIFFS used bytes: ", SPIFFS.usedBytes(), ", total bytes: ", SPIFFS.totalBytes());
}
}
return true;

8
Marlin/src/HAL/HAL_ESP32/spiffs.cpp
View File

@ -28,16 +28,16 @@
#include "../../core/serial.h"
#include "FS.h"
#include "SPIFFS.h"
#include <FS.h>
#include <SPIFFS.h>
bool spiffs_initialized;
void spiffs_init() {
if (SPIFFS.begin())
if (SPIFFS.begin(true)) // formatOnFail = true
spiffs_initialized = true;
else
SERIAL_ECHO_MSG("SPIFFS mount failed");
SERIAL_ERROR_MSG("SPIFFS mount failed");
}
#endif // WEBSUPPORT

2
Marlin/src/HAL/HAL_ESP32/web.cpp
View File

@ -26,7 +26,7 @@
#if ENABLED(WEBSUPPORT)
#include "SPIFFS.h"
#include <SPIFFS.h>
#include "wifi.h"
AsyncEventSource events("/events"); // event source (Server-Sent events)

15
Marlin/src/HAL/HAL_ESP32/wifi.cpp
View File

@ -22,6 +22,7 @@
#ifdef ARDUINO_ARCH_ESP32
#include "../../core/serial.h"
#include "../../inc/MarlinConfigPre.h"
#if ENABLED(WIFISUPPORT)
@ -38,20 +39,28 @@ AsyncWebServer server(80);
#endif
void wifi_init() {
SERIAL_ECHO_MSG("Starting WiFi...");
WiFi.mode(WIFI_STA);
WiFi.begin(WIFI_SSID, WIFI_PWD);
while (WiFi.waitForConnectResult() != WL_CONNECTED) {
SERIAL_ERROR_MSG("Unable to connect to WiFi with SSID '" WIFI_SSID "', restarting.");
delay(5000);
ESP.restart();
}
delay(10);
// Loop forever (watchdog kill) on failure
if (!MDNS.begin(WIFI_HOSTNAME)) for(;;) delay(5000);
if (!MDNS.begin(WIFI_HOSTNAME)) {
SERIAL_ERROR_MSG("Unable to start mDNS with hostname '" WIFI_HOSTNAME "', restarting.");
delay(5000);
ESP.restart();
}
MDNS.addService("http", "tcp", 80);
SERIAL_ECHOLNPAIR("Successfully connected to WiFi with SSID '" WIFI_SSID "', hostname: '" WIFI_HOSTNAME "', IP address: ", WiFi.localIP().toString().c_str());
}
#endif // WIFISUPPORT

2
Marlin/src/pins/pins_ESP32.h
View File

@ -40,6 +40,8 @@
//
// Steppers
//
#define I2S_STEPPER_STREAM
#define X_STEP_PIN 128
#define X_DIR_PIN 129
#define X_ENABLE_PIN 130