diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index df1c1d245f..cb327e9b73 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -2527,7 +2527,7 @@ // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm) Cutting retraction out of park, for less stringing, better wipe, etc. Adjust with LCD or M217 G. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip diff --git a/Marlin/src/gcode/config/M217.cpp b/Marlin/src/gcode/config/M217.cpp index 989e4d0870..b360739e21 100644 --- a/Marlin/src/gcode/config/M217.cpp +++ b/Marlin/src/gcode/config/M217.cpp @@ -43,13 +43,14 @@ * S[linear] Swap length * B[linear] Extra Swap resume length * E[linear] Extra Prime length (as used by M217 Q) - * P[linear/min] Prime speed + * G[linear] Cutting wipe retract length (<=100mm) * R[linear/min] Retract speed * U[linear/min] UnRetract speed + * P[linear/min] Prime speed * V[linear] 0/1 Enable auto prime first extruder used * W[linear] 0/1 Enable park & Z Raise * X[linear] Park X (Requires TOOLCHANGE_PARK) - * Y[linear] Park Y (Requires TOOLCHANGE_PARK) + * Y[linear] Park Y (Requires TOOLCHANGE_PARK and NUM_AXES >= 2) * I[linear] Park I (Requires TOOLCHANGE_PARK and NUM_AXES >= 4) * J[linear] Park J (Requires TOOLCHANGE_PARK and NUM_AXES >= 5) * K[linear] Park K (Requires TOOLCHANGE_PARK and NUM_AXES >= 6) @@ -79,6 +80,7 @@ void GcodeSuite::M217() { if (parser.seenval('B')) { const float v = parser.value_linear_units(); toolchange_settings.extra_resume = constrain(v, -10, 10); } if (parser.seenval('E')) { const float v = parser.value_linear_units(); toolchange_settings.extra_prime = constrain(v, 0, max_extrude); } if (parser.seenval('P')) { const int16_t v = parser.value_linear_units(); toolchange_settings.prime_speed = constrain(v, 10, 5400); } + if (parser.seenval('G')) { const int16_t v = parser.value_linear_units(); toolchange_settings.wipe_retract = constrain(v, 0, 100); } if (parser.seenval('R')) { const int16_t v = parser.value_linear_units(); toolchange_settings.retract_speed = constrain(v, 10, 5400); } if (parser.seenval('U')) { const int16_t v = parser.value_linear_units(); toolchange_settings.unretract_speed = constrain(v, 10, 5400); } #if TOOLCHANGE_FS_FAN >= 0 && HAS_FAN @@ -164,21 +166,24 @@ void GcodeSuite::M217_report(const bool forReplay/*=true*/) { SERIAL_ECHOPGM(" M217"); #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - SERIAL_ECHOPGM(" S", LINEAR_UNIT(toolchange_settings.swap_length)); - SERIAL_ECHOPGM_P(SP_B_STR, LINEAR_UNIT(toolchange_settings.extra_resume), - SP_E_STR, LINEAR_UNIT(toolchange_settings.extra_prime), - SP_P_STR, LINEAR_UNIT(toolchange_settings.prime_speed)); - SERIAL_ECHOPGM(" R", LINEAR_UNIT(toolchange_settings.retract_speed), - " U", LINEAR_UNIT(toolchange_settings.unretract_speed), - " F", toolchange_settings.fan_speed, - " D", toolchange_settings.fan_time); + SERIAL_ECHOPGM_P( + PSTR(" S"), LINEAR_UNIT(toolchange_settings.swap_length), + SP_B_STR, LINEAR_UNIT(toolchange_settings.extra_resume), + SP_E_STR, LINEAR_UNIT(toolchange_settings.extra_prime), + SP_P_STR, LINEAR_UNIT(toolchange_settings.prime_speed), + PSTR(" G"), LINEAR_UNIT(toolchange_settings.wipe_retract), + PSTR(" R"), LINEAR_UNIT(toolchange_settings.retract_speed), + PSTR(" U"), LINEAR_UNIT(toolchange_settings.unretract_speed), + PSTR(" F"), toolchange_settings.fan_speed, + PSTR(" D"), toolchange_settings.fan_time + ); #if ENABLED(TOOLCHANGE_MIGRATION_FEATURE) - SERIAL_ECHOPGM(" A", migration.automode); - SERIAL_ECHOPGM(" L", LINEAR_UNIT(migration.last)); + SERIAL_ECHOPGM(" A", migration.automode, " L", LINEAR_UNIT(migration.last)); #endif #if ENABLED(TOOLCHANGE_PARK) + { SERIAL_ECHOPGM(" W", LINEAR_UNIT(toolchange_settings.enable_park)); SERIAL_ECHOPGM_P( SP_X_STR, LINEAR_UNIT(toolchange_settings.change_point.x) @@ -196,6 +201,7 @@ void GcodeSuite::M217_report(const bool forReplay/*=true*/) { ) #endif ); + } #endif #if ENABLED(TOOLCHANGE_FS_PRIME_FIRST_USED) diff --git a/Marlin/src/lcd/language/language_en.h b/Marlin/src/lcd/language/language_en.h index 2ababe2927..6b1ca2a30d 100644 --- a/Marlin/src/lcd/language/language_en.h +++ b/Marlin/src/lcd/language/language_en.h @@ -521,6 +521,7 @@ namespace Language_en { LSTR MSG_TOOL_CHANGE = _UxGT("Tool Change"); LSTR MSG_TOOL_CHANGE_ZLIFT = _UxGT("Z Raise"); LSTR MSG_SINGLENOZZLE_PRIME_SPEED = _UxGT("Prime Speed"); + LSTR MSG_SINGLENOZZLE_WIPE_RETRACT = _UxGT("Wipe Retract"); LSTR MSG_SINGLENOZZLE_RETRACT_SPEED = _UxGT("Retract Speed"); LSTR MSG_FILAMENT_PARK_ENABLED = _UxGT("Park Head"); LSTR MSG_SINGLENOZZLE_UNRETRACT_SPEED = _UxGT("Recover Speed"); diff --git a/Marlin/src/lcd/language/language_fr.h b/Marlin/src/lcd/language/language_fr.h index 0a11e862f7..05e69a583f 100644 --- a/Marlin/src/lcd/language/language_fr.h +++ b/Marlin/src/lcd/language/language_fr.h @@ -376,6 +376,7 @@ namespace Language_fr { LSTR MSG_TOOL_CHANGE = _UxGT("Changement outil"); LSTR MSG_TOOL_CHANGE_ZLIFT = _UxGT("Augmenter Z"); LSTR MSG_SINGLENOZZLE_PRIME_SPEED = _UxGT("Vitesse primaire"); + LSTR MSG_SINGLENOZZLE_WIPE_RETRACT = _UxGT("Purge Retract"); LSTR MSG_SINGLENOZZLE_RETRACT_SPEED = _UxGT("Vitesse rétract°"); LSTR MSG_FILAMENT_PARK_ENABLED = _UxGT("Garer Extrudeur"); LSTR MSG_SINGLENOZZLE_UNRETRACT_SPEED = _UxGT("Vitesse reprise"); diff --git a/Marlin/src/lcd/menu/menu_configuration.cpp b/Marlin/src/lcd/menu/menu_configuration.cpp index 9eef94823e..7ae199dfd6 100644 --- a/Marlin/src/lcd/menu/menu_configuration.cpp +++ b/Marlin/src/lcd/menu/menu_configuration.cpp @@ -124,6 +124,7 @@ void menu_advanced_settings(); EDIT_ITEM_FAST(int4, MSG_SINGLENOZZLE_UNRETRACT_SPEED, &toolchange_settings.unretract_speed, 10, 5400); EDIT_ITEM(float3, MSG_FILAMENT_PURGE_LENGTH, &toolchange_settings.extra_prime, 0, max_extrude); EDIT_ITEM_FAST(int4, MSG_SINGLENOZZLE_PRIME_SPEED, &toolchange_settings.prime_speed, 10, 5400); + EDIT_ITEM_FAST(int4, MSG_SINGLENOZZLE_WIPE_RETRACT, &toolchange_settings.wipe_retract, 0, 100); EDIT_ITEM_FAST(uint8, MSG_SINGLENOZZLE_FAN_SPEED, &toolchange_settings.fan_speed, 0, 255); EDIT_ITEM_FAST(uint8, MSG_SINGLENOZZLE_FAN_TIME, &toolchange_settings.fan_time, 1, 30); #endif diff --git a/Marlin/src/module/settings.cpp b/Marlin/src/module/settings.cpp index 179fea057d..2b6a98b045 100644 --- a/Marlin/src/module/settings.cpp +++ b/Marlin/src/module/settings.cpp @@ -36,7 +36,7 @@ */ // Change EEPROM version if the structure changes -#define EEPROM_VERSION "V86" +#define EEPROM_VERSION "V87" #define EEPROM_OFFSET 100 // Check the integrity of data offsets. @@ -2876,6 +2876,7 @@ void MarlinSettings::reset() { toolchange_settings.unretract_speed = TOOLCHANGE_FS_UNRETRACT_SPEED; toolchange_settings.extra_prime = TOOLCHANGE_FS_EXTRA_PRIME; toolchange_settings.prime_speed = TOOLCHANGE_FS_PRIME_SPEED; + toolchange_settings.wipe_retract = TOOLCHANGE_FS_WIPE_RETRACT; toolchange_settings.fan_speed = TOOLCHANGE_FS_FAN_SPEED; toolchange_settings.fan_time = TOOLCHANGE_FS_FAN_TIME; #endif diff --git a/Marlin/src/module/tool_change.cpp b/Marlin/src/module/tool_change.cpp index dbd95121dc..0ff0856ddd 100644 --- a/Marlin/src/module/tool_change.cpp +++ b/Marlin/src/module/tool_change.cpp @@ -940,13 +940,13 @@ void fast_line_to_current(const AxisEnum fr_axis) { _line_to_current(fr_axis, 0. * Cutting recovery -- Recover from cutting retraction that occurs at the end of nozzle priming * * If the active_extruder is up to temp (!too_cold): - * Extrude filament distance = toolchange_settings.extra_resume + TOOLCHANGE_FS_WIPE_RETRACT + * Extrude filament distance = toolchange_settings.extra_resume + toolchange_settings.wipe_retract * current_position.e = e; * sync_plan_position_e(); */ void extruder_cutting_recover(const_float_t e) { if (!too_cold(active_extruder)) { - const float dist = toolchange_settings.extra_resume + (TOOLCHANGE_FS_WIPE_RETRACT); + const float dist = toolchange_settings.extra_resume + toolchange_settings.wipe_retract; FS_DEBUG("Performing Cutting Recover | Distance: ", dist, " | Speed: ", MMM_TO_MMS(toolchange_settings.unretract_speed), "mm/s"); unscaled_e_move(dist, MMM_TO_MMS(toolchange_settings.unretract_speed)); planner.synchronize(); @@ -973,17 +973,17 @@ void fast_line_to_current(const AxisEnum fr_axis) { _line_to_current(fr_axis, 0. float fr = toolchange_settings.unretract_speed; // Set default speed for unretract #if ENABLED(TOOLCHANGE_FS_SLOW_FIRST_PRIME) - /* - * Perform first unretract movement at the slower Prime_Speed to avoid breakage on first prime - */ - static Flags extruder_did_first_prime; // Extruders first priming status - if (!extruder_did_first_prime[active_extruder]) { - extruder_did_first_prime.set(active_extruder); // Log first prime complete - // new nozzle - prime at user-specified speed. - FS_DEBUG("First time priming T", active_extruder, ", reducing speed from ", MMM_TO_MMS(fr), " to ", MMM_TO_MMS(toolchange_settings.prime_speed), "mm/s"); - fr = toolchange_settings.prime_speed; - unscaled_e_move(0, MMM_TO_MMS(fr)); // Init planner with 0 length move - } + /** + * Perform first unretract movement at the slower Prime_Speed to avoid breakage on first prime + */ + static Flags extruder_did_first_prime; // Extruders first priming status + if (!extruder_did_first_prime[active_extruder]) { + extruder_did_first_prime.set(active_extruder); // Log first prime complete + // new nozzle - prime at user-specified speed. + FS_DEBUG("First time priming T", active_extruder, ", reducing speed from ", MMM_TO_MMS(fr), " to ", MMM_TO_MMS(toolchange_settings.prime_speed), "mm/s"); + fr = toolchange_settings.prime_speed; + unscaled_e_move(0, MMM_TO_MMS(fr)); // Init planner with 0 length move + } #endif //Calculate and perform the priming distance @@ -1011,8 +1011,8 @@ void fast_line_to_current(const AxisEnum fr_axis) { _line_to_current(fr_axis, 0. // Cutting retraction #if TOOLCHANGE_FS_WIPE_RETRACT - FS_DEBUG("Performing Cutting Retraction | Distance: ", -(TOOLCHANGE_FS_WIPE_RETRACT), " | Speed: ", MMM_TO_MMS(toolchange_settings.retract_speed), "mm/s"); - unscaled_e_move(-(TOOLCHANGE_FS_WIPE_RETRACT), MMM_TO_MMS(toolchange_settings.retract_speed)); + FS_DEBUG("Performing Cutting Retraction | Distance: ", -toolchange_settings.wipe_retract, " | Speed: ", MMM_TO_MMS(toolchange_settings.retract_speed), "mm/s"); + unscaled_e_move(-toolchange_settings.wipe_retract, MMM_TO_MMS(toolchange_settings.retract_speed)); #endif // Cool down with fan diff --git a/Marlin/src/module/tool_change.h b/Marlin/src/module/tool_change.h index 864062f572..ff456485e2 100644 --- a/Marlin/src/module/tool_change.h +++ b/Marlin/src/module/tool_change.h @@ -33,6 +33,7 @@ float extra_prime; // M217 E float extra_resume; // M217 B int16_t prime_speed; // M217 P + int16_t wipe_retract; // M217 G int16_t retract_speed; // M217 R int16_t unretract_speed; // M217 U uint8_t fan_speed; // M217 F