Merge pull request #4299 from jbrazio/feature/g27-park-nozzle

Implements park nozzle feature

.travis.yml

@@ -211,10 +211,16 @@ script:
   - opt_enable PRINTCOUNTER
   - build_marlin
   #
-  # Test CLEAN_NOZZLE_FEATURE
+  # Test NOZZLE_PARK_FEATURE
   #
   - restore_configs
-  - opt_enable AUTO_BED_LEVELING_FEATURE CLEAN_NOZZLE_FEATURE FIX_MOUNTED_PROBE
+  - opt_enable NOZZLE_PARK_FEATURE
+  - build_marlin
+  #
+  # Test NOZZLE_CLEAN_FEATURE
+  #
+  - restore_configs
+  - opt_enable AUTO_BED_LEVELING_FEATURE NOZZLE_CLEAN_FEATURE FIX_MOUNTED_PROBE
   - build_marlin
   #
   #

Marlin/Configuration.h

@@ -803,6 +803,30 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 #define PREHEAT_2_TEMP_BED    110
 #define PREHEAT_2_FAN_SPEED     0 // Value from 0 to 255
 
+//
+// Nozzle Park -- EXPERIMENTAL
+//
+// When enabled allows the user to define a special XYZ position, inside the
+// machine's topology, to park the nozzle when idle or when receiving the G27
+// command.
+//
+// The "P" paramenter controls what is the action applied to the Z axis:
+//    P0: (Default) If current Z-pos is lower than Z-park then the nozzle will
+//        be raised to reach Z-park height.
+//
+//    P1: No matter the current Z-pos, the nozzle will be raised/lowered to
+//        reach Z-park height.
+//
+//    P2: The nozzle height will be raised by Z-park amount but never going over
+//        the machine's limit of Z_MAX_POS.
+//
+//#define NOZZLE_PARK_FEATURE
+
+#if ENABLED(NOZZLE_PARK_FEATURE)
+  // Specify a park position as { X, Y, Z }
+  #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
+#endif
+
 //
 // Clean Nozzle Feature -- EXPERIMENTAL
 //

Marlin/Marlin_main.cpp

@@ -2736,9 +2736,12 @@ inline void gcode_G4() {
 
 #endif //FWRETRACT
 
-#if ENABLED(NOZZLE_CLEAN_FEATURE) && ENABLED(AUTO_BED_LEVELING_FEATURE)
+#if ENABLED(NOZZLE_CLEAN_FEATURE) && HAS_BED_PROBE
   #include "nozzle.h"
 
+  /**
+   * G12: Clean the nozzle
+   */
   inline void gcode_G12() {
     // Don't allow nozzle cleaning without homing first
     if (axis_unhomed_error(true, true, true)) { return; }
@@ -2795,6 +2798,20 @@ inline void gcode_G4() {
 
 #endif // QUICK_HOME
 
+#if ENABLED(NOZZLE_PARK_FEATURE)
+  #include "nozzle.h"
+
+  /**
+   * G27: Park the nozzle
+   */
+  inline void gcode_G27() {
+    // Don't allow nozzle parking without homing first
+    if (axis_unhomed_error(true, true, true)) { return; }
+    uint8_t const z_action = code_seen('P') ? code_value_ushort() : 0;
+    Nozzle::park(z_action);
+  }
+#endif // NOZZLE_PARK_FEATURE
+
 /**
  * G28: Home all axes according to settings
  *
@@ -6884,7 +6901,7 @@ void process_next_command() {
 
       #if ENABLED(NOZZLE_CLEAN_FEATURE) && HAS_BED_PROBE
         case 12:
-          gcode_G12(); // G12: Clean Nozzle
+          gcode_G12(); // G12: Nozzle Clean
           break;
       #endif // NOZZLE_CLEAN_FEATURE
 
@@ -6898,6 +6915,12 @@ void process_next_command() {
           break;
       #endif // INCH_MODE_SUPPORT
 
+      #if ENABLED(NOZZLE_PARK_FEATURE)
+        case 27: // G27: Nozzle Park
+          gcode_G27();
+          break;
+      #endif // NOZZLE_PARK_FEATURE
+
       case 28: // G28: Home all axes, one at a time
         gcode_G28();
         break;

Marlin/example_configurations/Cartesio/Configuration.h

@@ -803,6 +803,30 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 #define PREHEAT_2_TEMP_BED    110
 #define PREHEAT_2_FAN_SPEED     0 // Value from 0 to 255
 
+//
+// Nozzle Park -- EXPERIMENTAL
+//
+// When enabled allows the user to define a special XYZ position, inside the
+// machine's topology, to park the nozzle when idle or when receiving the G27
+// command.
+//
+// The "P" paramenter controls what is the action applied to the Z axis:
+//    P0: (Default) If current Z-pos is lower than Z-park then the nozzle will
+//        be raised to reach Z-park height.
+//
+//    P1: No matter the current Z-pos, the nozzle will be raised/lowered to
+//        reach Z-park height.
+//
+//    P2: The nozzle height will be raised by Z-park amount but never going over
+//        the machine's limit of Z_MAX_POS.
+//
+//#define NOZZLE_PARK_FEATURE
+
+#if ENABLED(NOZZLE_PARK_FEATURE)
+  // Specify a park position as { X, Y, Z }
+  #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
+#endif
+
 //
 // Clean Nozzle Feature -- EXPERIMENTAL
 //

Marlin/example_configurations/Felix/Configuration.h

@@ -786,6 +786,30 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 #define PREHEAT_2_TEMP_BED    100
 #define PREHEAT_2_FAN_SPEED   255 // Value from 0 to 255
 
+//
+// Nozzle Park -- EXPERIMENTAL
+//
+// When enabled allows the user to define a special XYZ position, inside the
+// machine's topology, to park the nozzle when idle or when receiving the G27
+// command.
+//
+// The "P" paramenter controls what is the action applied to the Z axis:
+//    P0: (Default) If current Z-pos is lower than Z-park then the nozzle will
+//        be raised to reach Z-park height.
+//
+//    P1: No matter the current Z-pos, the nozzle will be raised/lowered to
+//        reach Z-park height.
+//
+//    P2: The nozzle height will be raised by Z-park amount but never going over
+//        the machine's limit of Z_MAX_POS.
+//
+//#define NOZZLE_PARK_FEATURE
+
+#if ENABLED(NOZZLE_PARK_FEATURE)
+  // Specify a park position as { X, Y, Z }
+  #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
+#endif
+
 //
 // Clean Nozzle Feature -- EXPERIMENTAL
 //

Marlin/example_configurations/Felix/DUAL/Configuration.h

@@ -784,6 +784,30 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 #define PREHEAT_2_TEMP_BED    100
 #define PREHEAT_2_FAN_SPEED   255 // Value from 0 to 255
 
+//
+// Nozzle Park -- EXPERIMENTAL
+//
+// When enabled allows the user to define a special XYZ position, inside the
+// machine's topology, to park the nozzle when idle or when receiving the G27
+// command.
+//
+// The "P" paramenter controls what is the action applied to the Z axis:
+//    P0: (Default) If current Z-pos is lower than Z-park then the nozzle will
+//        be raised to reach Z-park height.
+//
+//    P1: No matter the current Z-pos, the nozzle will be raised/lowered to
+//        reach Z-park height.
+//
+//    P2: The nozzle height will be raised by Z-park amount but never going over
+//        the machine's limit of Z_MAX_POS.
+//
+//#define NOZZLE_PARK_FEATURE
+
+#if ENABLED(NOZZLE_PARK_FEATURE)
+  // Specify a park position as { X, Y, Z }
+  #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
+#endif
+
 //
 // Clean Nozzle Feature -- EXPERIMENTAL
 //

Marlin/example_configurations/Hephestos/Configuration.h

@@ -795,6 +795,30 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 #define PREHEAT_2_TEMP_BED    100
 #define PREHEAT_2_FAN_SPEED   255 // Value from 0 to 255
 
+//
+// Nozzle Park -- EXPERIMENTAL
+//
+// When enabled allows the user to define a special XYZ position, inside the
+// machine's topology, to park the nozzle when idle or when receiving the G27
+// command.
+//
+// The "P" paramenter controls what is the action applied to the Z axis:
+//    P0: (Default) If current Z-pos is lower than Z-park then the nozzle will
+//        be raised to reach Z-park height.
+//
+//    P1: No matter the current Z-pos, the nozzle will be raised/lowered to
+//        reach Z-park height.
+//
+//    P2: The nozzle height will be raised by Z-park amount but never going over
+//        the machine's limit of Z_MAX_POS.
+//
+//#define NOZZLE_PARK_FEATURE
+
+#if ENABLED(NOZZLE_PARK_FEATURE)
+  // Specify a park position as { X, Y, Z }
+  #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
+#endif
+
 //
 // Clean Nozzle Feature -- EXPERIMENTAL
 //

Marlin/example_configurations/Hephestos_2/Configuration.h

@@ -797,6 +797,30 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 #define PREHEAT_2_TEMP_BED    110
 #define PREHEAT_2_FAN_SPEED     0 // Value from 0 to 255
 
+//
+// Nozzle Park -- EXPERIMENTAL
+//
+// When enabled allows the user to define a special XYZ position, inside the
+// machine's topology, to park the nozzle when idle or when receiving the G27
+// command.
+//
+// The "P" paramenter controls what is the action applied to the Z axis:
+//    P0: (Default) If current Z-pos is lower than Z-park then the nozzle will
+//        be raised to reach Z-park height.
+//
+//    P1: No matter the current Z-pos, the nozzle will be raised/lowered to
+//        reach Z-park height.
+//
+//    P2: The nozzle height will be raised by Z-park amount but never going over
+//        the machine's limit of Z_MAX_POS.
+//
+//#define NOZZLE_PARK_FEATURE
+
+#if ENABLED(NOZZLE_PARK_FEATURE)
+  // Specify a park position as { X, Y, Z }
+  #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
+#endif
+
 //
 // Clean Nozzle Feature -- EXPERIMENTAL
 //

Marlin/example_configurations/K8200/Configuration.h

@@ -820,6 +820,30 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 #define PREHEAT_2_TEMP_BED     60 // K8200: set back to 110 if you have an upgraded heatbed power supply
 #define PREHEAT_2_FAN_SPEED     0 // Value from 0 to 255
 
+//
+// Nozzle Park -- EXPERIMENTAL
+//
+// When enabled allows the user to define a special XYZ position, inside the
+// machine's topology, to park the nozzle when idle or when receiving the G27
+// command.
+//
+// The "P" paramenter controls what is the action applied to the Z axis:
+//    P0: (Default) If current Z-pos is lower than Z-park then the nozzle will
+//        be raised to reach Z-park height.
+//
+//    P1: No matter the current Z-pos, the nozzle will be raised/lowered to
+//        reach Z-park height.
+//
+//    P2: The nozzle height will be raised by Z-park amount but never going over
+//        the machine's limit of Z_MAX_POS.
+//
+//#define NOZZLE_PARK_FEATURE
+
+#if ENABLED(NOZZLE_PARK_FEATURE)
+  // Specify a park position as { X, Y, Z }
+  #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
+#endif
+
 //
 // Clean Nozzle Feature -- EXPERIMENTAL
 //

Marlin/example_configurations/K8400/Configuration.h

@@ -803,6 +803,30 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 #define PREHEAT_2_TEMP_BED      0
 #define PREHEAT_2_FAN_SPEED   165 // Value from 0 to 255
 
+//
+// Nozzle Park -- EXPERIMENTAL
+//
+// When enabled allows the user to define a special XYZ position, inside the
+// machine's topology, to park the nozzle when idle or when receiving the G27
+// command.
+//
+// The "P" paramenter controls what is the action applied to the Z axis:
+//    P0: (Default) If current Z-pos is lower than Z-park then the nozzle will
+//        be raised to reach Z-park height.
+//
+//    P1: No matter the current Z-pos, the nozzle will be raised/lowered to
+//        reach Z-park height.
+//
+//    P2: The nozzle height will be raised by Z-park amount but never going over
+//        the machine's limit of Z_MAX_POS.
+//
+//#define NOZZLE_PARK_FEATURE
+
+#if ENABLED(NOZZLE_PARK_FEATURE)
+  // Specify a park position as { X, Y, Z }
+  #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
+#endif
+
 //
 // Clean Nozzle Feature -- EXPERIMENTAL
 //

Marlin/example_configurations/K8400/Dual-head/Configuration.h

@@ -803,6 +803,30 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 #define PREHEAT_2_TEMP_BED      0
 #define PREHEAT_2_FAN_SPEED   165 // Value from 0 to 255
 
+//
+// Nozzle Park -- EXPERIMENTAL
+//
+// When enabled allows the user to define a special XYZ position, inside the
+// machine's topology, to park the nozzle when idle or when receiving the G27
+// command.
+//
+// The "P" paramenter controls what is the action applied to the Z axis:
+//    P0: (Default) If current Z-pos is lower than Z-park then the nozzle will
+//        be raised to reach Z-park height.
+//
+//    P1: No matter the current Z-pos, the nozzle will be raised/lowered to
+//        reach Z-park height.
+//
+//    P2: The nozzle height will be raised by Z-park amount but never going over
+//        the machine's limit of Z_MAX_POS.
+//
+//#define NOZZLE_PARK_FEATURE
+
+#if ENABLED(NOZZLE_PARK_FEATURE)
+  // Specify a park position as { X, Y, Z }
+  #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
+#endif
+
 //
 // Clean Nozzle Feature -- EXPERIMENTAL
 //

Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h

@@ -803,6 +803,30 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 #define PREHEAT_2_TEMP_BED    110
 #define PREHEAT_2_FAN_SPEED     0 // Value from 0 to 255
 
+//
+// Nozzle Park -- EXPERIMENTAL
+//
+// When enabled allows the user to define a special XYZ position, inside the
+// machine's topology, to park the nozzle when idle or when receiving the G27
+// command.
+//
+// The "P" paramenter controls what is the action applied to the Z axis:
+//    P0: (Default) If current Z-pos is lower than Z-park then the nozzle will
+//        be raised to reach Z-park height.
+//
+//    P1: No matter the current Z-pos, the nozzle will be raised/lowered to
+//        reach Z-park height.
+//
+//    P2: The nozzle height will be raised by Z-park amount but never going over
+//        the machine's limit of Z_MAX_POS.
+//
+//#define NOZZLE_PARK_FEATURE
+
+#if ENABLED(NOZZLE_PARK_FEATURE)
+  // Specify a park position as { X, Y, Z }
+  #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
+#endif
+
 //
 // Clean Nozzle Feature -- EXPERIMENTAL
 //

Marlin/example_configurations/RigidBot/Configuration.h

@@ -801,6 +801,30 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 #define PREHEAT_2_TEMP_BED    110
 #define PREHEAT_2_FAN_SPEED   255 // Value from 0 to 255
 
+//
+// Nozzle Park -- EXPERIMENTAL
+//
+// When enabled allows the user to define a special XYZ position, inside the
+// machine's topology, to park the nozzle when idle or when receiving the G27
+// command.
+//
+// The "P" paramenter controls what is the action applied to the Z axis:
+//    P0: (Default) If current Z-pos is lower than Z-park then the nozzle will
+//        be raised to reach Z-park height.
+//
+//    P1: No matter the current Z-pos, the nozzle will be raised/lowered to
+//        reach Z-park height.
+//
+//    P2: The nozzle height will be raised by Z-park amount but never going over
+//        the machine's limit of Z_MAX_POS.
+//
+//#define NOZZLE_PARK_FEATURE
+
+#if ENABLED(NOZZLE_PARK_FEATURE)
+  // Specify a park position as { X, Y, Z }
+  #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
+#endif
+
 //
 // Clean Nozzle Feature -- EXPERIMENTAL
 //

Marlin/example_configurations/SCARA/Configuration.h

@@ -811,6 +811,30 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 #define PREHEAT_2_TEMP_BED    100
 #define PREHEAT_2_FAN_SPEED   255 // Value from 0 to 255
 
+//
+// Nozzle Park -- EXPERIMENTAL
+//
+// When enabled allows the user to define a special XYZ position, inside the
+// machine's topology, to park the nozzle when idle or when receiving the G27
+// command.
+//
+// The "P" paramenter controls what is the action applied to the Z axis:
+//    P0: (Default) If current Z-pos is lower than Z-park then the nozzle will
+//        be raised to reach Z-park height.
+//
+//    P1: No matter the current Z-pos, the nozzle will be raised/lowered to
+//        reach Z-park height.
+//
+//    P2: The nozzle height will be raised by Z-park amount but never going over
+//        the machine's limit of Z_MAX_POS.
+//
+//#define NOZZLE_PARK_FEATURE
+
+#if ENABLED(NOZZLE_PARK_FEATURE)
+  // Specify a park position as { X, Y, Z }
+  #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
+#endif
+
 //
 // Clean Nozzle Feature -- EXPERIMENTAL
 //

Marlin/example_configurations/TAZ4/Configuration.h

@@ -824,6 +824,30 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 #define PREHEAT_2_TEMP_BED    110
 #define PREHEAT_2_FAN_SPEED     0 // Value from 0 to 255
 
+//
+// Nozzle Park -- EXPERIMENTAL
+//
+// When enabled allows the user to define a special XYZ position, inside the
+// machine's topology, to park the nozzle when idle or when receiving the G27
+// command.
+//
+// The "P" paramenter controls what is the action applied to the Z axis:
+//    P0: (Default) If current Z-pos is lower than Z-park then the nozzle will
+//        be raised to reach Z-park height.
+//
+//    P1: No matter the current Z-pos, the nozzle will be raised/lowered to
+//        reach Z-park height.
+//
+//    P2: The nozzle height will be raised by Z-park amount but never going over
+//        the machine's limit of Z_MAX_POS.
+//
+//#define NOZZLE_PARK_FEATURE
+
+#if ENABLED(NOZZLE_PARK_FEATURE)
+  // Specify a park position as { X, Y, Z }
+  #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
+#endif
+
 //
 // Clean Nozzle Feature -- EXPERIMENTAL
 //

Marlin/example_configurations/WITBOX/Configuration.h

@@ -795,6 +795,30 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 #define PREHEAT_2_TEMP_BED    100
 #define PREHEAT_2_FAN_SPEED   255 // Value from 0 to 255
 
+//
+// Nozzle Park -- EXPERIMENTAL
+//
+// When enabled allows the user to define a special XYZ position, inside the
+// machine's topology, to park the nozzle when idle or when receiving the G27
+// command.
+//
+// The "P" paramenter controls what is the action applied to the Z axis:
+//    P0: (Default) If current Z-pos is lower than Z-park then the nozzle will
+//        be raised to reach Z-park height.
+//
+//    P1: No matter the current Z-pos, the nozzle will be raised/lowered to
+//        reach Z-park height.
+//
+//    P2: The nozzle height will be raised by Z-park amount but never going over
+//        the machine's limit of Z_MAX_POS.
+//
+//#define NOZZLE_PARK_FEATURE
+
+#if ENABLED(NOZZLE_PARK_FEATURE)
+  // Specify a park position as { X, Y, Z }
+  #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
+#endif
+
 //
 // Clean Nozzle Feature -- EXPERIMENTAL
 //

Marlin/example_configurations/adafruit/ST7565/Configuration.h

@@ -803,6 +803,30 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 #define PREHEAT_2_TEMP_BED    110
 #define PREHEAT_2_FAN_SPEED     0 // Value from 0 to 255
 
+//
+// Nozzle Park -- EXPERIMENTAL
+//
+// When enabled allows the user to define a special XYZ position, inside the
+// machine's topology, to park the nozzle when idle or when receiving the G27
+// command.
+//
+// The "P" paramenter controls what is the action applied to the Z axis:
+//    P0: (Default) If current Z-pos is lower than Z-park then the nozzle will
+//        be raised to reach Z-park height.
+//
+//    P1: No matter the current Z-pos, the nozzle will be raised/lowered to
+//        reach Z-park height.
+//
+//    P2: The nozzle height will be raised by Z-park amount but never going over
+//        the machine's limit of Z_MAX_POS.
+//
+//#define NOZZLE_PARK_FEATURE
+
+#if ENABLED(NOZZLE_PARK_FEATURE)
+  // Specify a park position as { X, Y, Z }
+  #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
+#endif
+
 //
 // Clean Nozzle Feature -- EXPERIMENTAL
 //

Marlin/example_configurations/delta/biv2.5/Configuration.h

@@ -898,6 +898,30 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 #define PREHEAT_2_TEMP_BED    100
 #define PREHEAT_2_FAN_SPEED   255 // Value from 0 to 255
 
+//
+// Nozzle Park -- EXPERIMENTAL
+//
+// When enabled allows the user to define a special XYZ position, inside the
+// machine's topology, to park the nozzle when idle or when receiving the G27
+// command.
+//
+// The "P" paramenter controls what is the action applied to the Z axis:
+//    P0: (Default) If current Z-pos is lower than Z-park then the nozzle will
+//        be raised to reach Z-park height.
+//
+//    P1: No matter the current Z-pos, the nozzle will be raised/lowered to
+//        reach Z-park height.
+//
+//    P2: The nozzle height will be raised by Z-park amount but never going over
+//        the machine's limit of Z_MAX_POS.
+//
+//#define NOZZLE_PARK_FEATURE
+
+#if ENABLED(NOZZLE_PARK_FEATURE)
+  // Specify a park position as { X, Y, Z }
+  #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
+#endif
+
 //
 // Clean Nozzle Feature -- EXPERIMENTAL
 //

Marlin/example_configurations/delta/generic/Configuration.h

@@ -892,6 +892,30 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 #define PREHEAT_2_TEMP_BED    100
 #define PREHEAT_2_FAN_SPEED   255 // Value from 0 to 255
 
+//
+// Nozzle Park -- EXPERIMENTAL
+//
+// When enabled allows the user to define a special XYZ position, inside the
+// machine's topology, to park the nozzle when idle or when receiving the G27
+// command.
+//
+// The "P" paramenter controls what is the action applied to the Z axis:
+//    P0: (Default) If current Z-pos is lower than Z-park then the nozzle will
+//        be raised to reach Z-park height.
+//
+//    P1: No matter the current Z-pos, the nozzle will be raised/lowered to
+//        reach Z-park height.
+//
+//    P2: The nozzle height will be raised by Z-park amount but never going over
+//        the machine's limit of Z_MAX_POS.
+//
+//#define NOZZLE_PARK_FEATURE
+
+#if ENABLED(NOZZLE_PARK_FEATURE)
+  // Specify a park position as { X, Y, Z }
+  #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
+#endif
+
 //
 // Clean Nozzle Feature -- EXPERIMENTAL
 //

Marlin/example_configurations/delta/kossel_mini/Configuration.h

@@ -895,6 +895,30 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 #define PREHEAT_2_TEMP_BED    100
 #define PREHEAT_2_FAN_SPEED   255 // Value from 0 to 255
 
+//
+// Nozzle Park -- EXPERIMENTAL
+//
+// When enabled allows the user to define a special XYZ position, inside the
+// machine's topology, to park the nozzle when idle or when receiving the G27
+// command.
+//
+// The "P" paramenter controls what is the action applied to the Z axis:
+//    P0: (Default) If current Z-pos is lower than Z-park then the nozzle will
+//        be raised to reach Z-park height.
+//
+//    P1: No matter the current Z-pos, the nozzle will be raised/lowered to
+//        reach Z-park height.
+//
+//    P2: The nozzle height will be raised by Z-park amount but never going over
+//        the machine's limit of Z_MAX_POS.
+//
+//#define NOZZLE_PARK_FEATURE
+
+#if ENABLED(NOZZLE_PARK_FEATURE)
+  // Specify a park position as { X, Y, Z }
+  #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
+#endif
+
 //
 // Clean Nozzle Feature -- EXPERIMENTAL
 //

Marlin/example_configurations/delta/kossel_pro/Configuration.h

@@ -895,6 +895,30 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 #define PREHEAT_2_TEMP_BED    100
 #define PREHEAT_2_FAN_SPEED   255 // Value from 0 to 255
 
+//
+// Nozzle Park -- EXPERIMENTAL
+//
+// When enabled allows the user to define a special XYZ position, inside the
+// machine's topology, to park the nozzle when idle or when receiving the G27
+// command.
+//
+// The "P" paramenter controls what is the action applied to the Z axis:
+//    P0: (Default) If current Z-pos is lower than Z-park then the nozzle will
+//        be raised to reach Z-park height.
+//
+//    P1: No matter the current Z-pos, the nozzle will be raised/lowered to
+//        reach Z-park height.
+//
+//    P2: The nozzle height will be raised by Z-park amount but never going over
+//        the machine's limit of Z_MAX_POS.
+//
+//#define NOZZLE_PARK_FEATURE
+
+#if ENABLED(NOZZLE_PARK_FEATURE)
+  // Specify a park position as { X, Y, Z }
+  #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
+#endif
+
 //
 // Clean Nozzle Feature -- EXPERIMENTAL
 //

Marlin/example_configurations/delta/kossel_xl/Configuration.h

@@ -897,6 +897,30 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 #define PREHEAT_2_TEMP_BED    100
 #define PREHEAT_2_FAN_SPEED   255 // Value from 0 to 255
 
+//
+// Nozzle Park -- EXPERIMENTAL
+//
+// When enabled allows the user to define a special XYZ position, inside the
+// machine's topology, to park the nozzle when idle or when receiving the G27
+// command.
+//
+// The "P" paramenter controls what is the action applied to the Z axis:
+//    P0: (Default) If current Z-pos is lower than Z-park then the nozzle will
+//        be raised to reach Z-park height.
+//
+//    P1: No matter the current Z-pos, the nozzle will be raised/lowered to
+//        reach Z-park height.
+//
+//    P2: The nozzle height will be raised by Z-park amount but never going over
+//        the machine's limit of Z_MAX_POS.
+//
+//#define NOZZLE_PARK_FEATURE
+
+#if ENABLED(NOZZLE_PARK_FEATURE)
+  // Specify a park position as { X, Y, Z }
+  #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
+#endif
+
 //
 // Clean Nozzle Feature -- EXPERIMENTAL
 //

Marlin/example_configurations/makibox/Configuration.h

@@ -806,6 +806,30 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 #define PREHEAT_2_TEMP_BED    100
 #define PREHEAT_2_FAN_SPEED   255 // Value from 0 to 255
 
+//
+// Nozzle Park -- EXPERIMENTAL
+//
+// When enabled allows the user to define a special XYZ position, inside the
+// machine's topology, to park the nozzle when idle or when receiving the G27
+// command.
+//
+// The "P" paramenter controls what is the action applied to the Z axis:
+//    P0: (Default) If current Z-pos is lower than Z-park then the nozzle will
+//        be raised to reach Z-park height.
+//
+//    P1: No matter the current Z-pos, the nozzle will be raised/lowered to
+//        reach Z-park height.
+//
+//    P2: The nozzle height will be raised by Z-park amount but never going over
+//        the machine's limit of Z_MAX_POS.
+//
+//#define NOZZLE_PARK_FEATURE
+
+#if ENABLED(NOZZLE_PARK_FEATURE)
+  // Specify a park position as { X, Y, Z }
+  #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
+#endif
+
 //
 // Clean Nozzle Feature -- EXPERIMENTAL
 //

Marlin/example_configurations/tvrrug/Round2/Configuration.h

@@ -797,6 +797,30 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 #define PREHEAT_2_TEMP_BED    100
 #define PREHEAT_2_FAN_SPEED   255 // Value from 0 to 255
 
+//
+// Nozzle Park -- EXPERIMENTAL
+//
+// When enabled allows the user to define a special XYZ position, inside the
+// machine's topology, to park the nozzle when idle or when receiving the G27
+// command.
+//
+// The "P" paramenter controls what is the action applied to the Z axis:
+//    P0: (Default) If current Z-pos is lower than Z-park then the nozzle will
+//        be raised to reach Z-park height.
+//
+//    P1: No matter the current Z-pos, the nozzle will be raised/lowered to
+//        reach Z-park height.
+//
+//    P2: The nozzle height will be raised by Z-park amount but never going over
+//        the machine's limit of Z_MAX_POS.
+//
+//#define NOZZLE_PARK_FEATURE
+
+#if ENABLED(NOZZLE_PARK_FEATURE)
+  // Specify a park position as { X, Y, Z }
+  #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
+#endif
+
 //
 // Clean Nozzle Feature -- EXPERIMENTAL
 //

Marlin/nozzle.h

@@ -30,8 +30,6 @@
  * @brief Nozzle class
  *
  * @todo: Do not ignore the end.z value and allow XYZ movements
- * @todo: Currently this feature needs HAS_BED_PROBE to be active
- *  due to the do_blocking_move_to*() functions.
  */
 class Nozzle {
   private:
@@ -43,8 +41,12 @@ class Nozzle {
      * @param end point_t defining the ending point
      * @param strokes number of strokes to execute
      */
-    static void stroke(point_t const &start, point_t const &end, uint8_t const &strokes)
-    __attribute__ ((optimize ("Os"))) {
+    static void stroke(
+      __attribute__((unused)) point_t const &start,
+      __attribute__((unused)) point_t const &end,
+      __attribute__((unused)) uint8_t const &strokes
+    ) __attribute__((optimize ("Os"))) {
+      #if ENABLED(NOZZLE_CLEAN_FEATURE)
 
         #if ENABLED(NOZZLE_CLEAN_PARK)
           // Store the current coords
@@ -54,7 +56,7 @@ class Nozzle {
             current_position[Z_AXIS],
             current_position[E_AXIS]
           };
-      #endif
+        #endif // NOZZLE_CLEAN_PARK
 
         // Move to the starting point
         do_blocking_move_to_xy(start.x, start.y);
@@ -70,7 +72,9 @@ class Nozzle {
           // Move the nozzle to the initial point
           do_blocking_move_to_z(initial.z);
           do_blocking_move_to_xy(initial.x, initial.y);
-      #endif
+        #endif // NOZZLE_CLEAN_PARK
+
+      #endif // NOZZLE_CLEAN_FEATURE
     }
 
     /**
@@ -82,9 +86,13 @@ class Nozzle {
      * @param strokes number of strokes to execute
      * @param objects number of objects to create
      */
-    static void zigzag(point_t const &start,
-      point_t const &end, uint8_t const &strokes, uint8_t const &objects)
-    __attribute__ ((optimize ("Os"))) {
+    static void zigzag(
+      __attribute__((unused)) point_t const &start,
+      __attribute__((unused)) point_t const &end,
+      __attribute__((unused)) uint8_t const &strokes,
+      __attribute__((unused)) uint8_t const &objects
+    ) __attribute__((optimize ("Os"))) {
+      #if ENABLED(NOZZLE_CLEAN_FEATURE)
         float A = fabs(end.y - start.y); // [twice the] Amplitude
         float P = fabs(end.x - start.x) / (objects << 1); // Period
 
@@ -99,7 +107,7 @@ class Nozzle {
             current_position[Z_AXIS],
             current_position[E_AXIS]
           };
-      #endif
+        #endif // NOZZLE_CLEAN_PARK
 
         for (uint8_t j = 0; j < strokes; j++) {
           for (uint8_t i = 0; i < (objects << 1); i++) {
@@ -122,7 +130,9 @@ class Nozzle {
           // Move the nozzle to the initial point
           do_blocking_move_to_z(initial.z);
           do_blocking_move_to_xy(initial.x, initial.y);
-      #endif
+        #endif // NOZZLE_CLEAN_PARK
+
+      #endif // NOZZLE_CLEAN_FEATURE
     }
 
   public:
@@ -133,9 +143,12 @@ class Nozzle {
      * @param pattern one of the available patterns
      * @param argument depends on the cleaning pattern
      */
-    static void clean(uint8_t const &pattern,
-      uint8_t const &strokes, uint8_t const &objects = 0)
-    __attribute__ ((optimize ("Os"))) {
+    static void clean(
+      __attribute__((unused)) uint8_t const &pattern,
+      __attribute__((unused)) uint8_t const &strokes,
+      __attribute__((unused)) uint8_t const &objects = 0
+    ) __attribute__((optimize ("Os"))) {
+      #if ENABLED(NOZZLE_CLEAN_FEATURE)
         switch (pattern) {
           case 1:
             Nozzle::zigzag(
@@ -148,6 +161,34 @@ class Nozzle {
               NOZZLE_CLEAN_START_PT,
               NOZZLE_CLEAN_END_PT, strokes);
         }
+      #endif // NOZZLE_CLEAN_FEATURE
+    }
+
+    static void park(
+      __attribute__((unused)) uint8_t const &z_action
+    ) __attribute__((optimize ("Os"))) {
+      #if ENABLED(NOZZLE_PARK_FEATURE)
+        float const z = current_position[Z_AXIS];
+        point_t const park = NOZZLE_PARK_POINT;
+
+        switch(z_action) {
+          case 1: // force Z-park height
+            do_blocking_move_to_z(park.z);
+            break;
+
+          case 2: // Raise by Z-park height
+            do_blocking_move_to_z(
+              (z + park.z > Z_MAX_POS) ? Z_MAX_POS : z + park.z);
+            break;
+
+          default: // Raise to Z-park height if lower
+            if (current_position[Z_AXIS] < park.z)
+              do_blocking_move_to_z(park.z);
+        }
+
+        do_blocking_move_to_xy(park.x, park.y);
+
+      #endif // NOZZLE_PARK_FEATURE
     }
 };