From c25c31b1deef9325bec882b9a676b2ab40be1a35 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Mon, 5 Oct 2020 01:07:41 -0500 Subject: [PATCH] Sync config to examples --- Marlin/Configuration.h | 7 ++++--- Marlin/Configuration_adv.h | 2 ++ 2 files changed, 6 insertions(+), 3 deletions(-) diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index e03887a9d7..ec8b162cd6 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -486,12 +486,13 @@ //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 20.0 } - #define DEFAULT_Ki_LIST { 1.08, 1.0 } - #define DEFAULT_Kd_LIST { 114.00, 112.0 } + #define DEFAULT_Kp_LIST { 22.20, 22.20 } + #define DEFAULT_Ki_LIST { 1.08, 1.08 } + #define DEFAULT_Kd_LIST { 114.00, 114.00 } #else #define DEFAULT_Kp 22.20 #define DEFAULT_Ki 1.08 diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index 8b74663eb5..e6bfde5c3b 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -771,6 +771,7 @@ // //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) + // Define positions for probing points, use the hotend as reference not the sensor. #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } @@ -793,6 +794,7 @@ * M5: 50 = Clockwise, 51 = Counter-Clockwise */ #define TRAMMING_SCREW_THREAD 30 + #endif // @section motion