diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
index f2b5ba95e9..126e4adea6 100644
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -411,16 +411,11 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 #endif
 
 //===========================================================================
-//=========================== Manual Bed Leveling ===========================
+//============================ Mesh Bed Leveling ============================
 //===========================================================================
 
-//#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
 //#define MESH_BED_LEVELING    // Enable mesh bed leveling.
 
-#if ENABLED(MANUAL_BED_LEVELING)
-  #define MBL_Z_STEP 0.025  // Step size while manually probing Z axis.
-#endif  // MANUAL_BED_LEVELING
-
 #if ENABLED(MESH_BED_LEVELING)
   #define MESH_MIN_X 10
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
@@ -429,6 +424,13 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
   #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
+
+  //#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
+
+  #if ENABLED(MANUAL_BED_LEVELING)
+    #define MBL_Z_STEP 0.025  // Step size while manually probing Z axis.
+  #endif  // MANUAL_BED_LEVELING
+
 #endif  // MESH_BED_LEVELING
 
 //===========================================================================
diff --git a/Marlin/example_configurations/Felix/Configuration.h b/Marlin/example_configurations/Felix/Configuration.h
index ebb18a7930..f11b255a70 100644
--- a/Marlin/example_configurations/Felix/Configuration.h
+++ b/Marlin/example_configurations/Felix/Configuration.h
@@ -393,16 +393,11 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 #endif
 
 //===========================================================================
-//=========================== Manual Bed Leveling ===========================
+//============================ Mesh Bed Leveling ============================
 //===========================================================================
 
-//#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
 //#define MESH_BED_LEVELING    // Enable mesh bed leveling.
 
-#if ENABLED(MANUAL_BED_LEVELING)
-  #define MBL_Z_STEP 0.025  // Step size while manually probing Z axis.
-#endif  // MANUAL_BED_LEVELING
-
 #if ENABLED(MESH_BED_LEVELING)
   #define MESH_MIN_X 10
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
@@ -411,6 +406,13 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
   #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
+
+  //#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
+
+  #if ENABLED(MANUAL_BED_LEVELING)
+    #define MBL_Z_STEP 0.025  // Step size while manually probing Z axis.
+  #endif  // MANUAL_BED_LEVELING
+
 #endif  // MESH_BED_LEVELING
 
 //===========================================================================
diff --git a/Marlin/example_configurations/Felix/Configuration_DUAL.h b/Marlin/example_configurations/Felix/Configuration_DUAL.h
index d1b093ec84..a4caa42675 100644
--- a/Marlin/example_configurations/Felix/Configuration_DUAL.h
+++ b/Marlin/example_configurations/Felix/Configuration_DUAL.h
@@ -363,16 +363,11 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 #endif
 
 //===========================================================================
-//=========================== Manual Bed Leveling ===========================
+//============================ Mesh Bed Leveling ============================
 //===========================================================================
 
-//#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
 //#define MESH_BED_LEVELING    // Enable mesh bed leveling.
 
-#if ENABLED(MANUAL_BED_LEVELING)
-  #define MBL_Z_STEP 0.025  // Step size while manually probing Z axis.
-#endif  // MANUAL_BED_LEVELING
-
 #if ENABLED(MESH_BED_LEVELING)
   #define MESH_MIN_X 10
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
@@ -381,6 +376,13 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
   #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
+
+  //#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
+
+  #if ENABLED(MANUAL_BED_LEVELING)
+    #define MBL_Z_STEP 0.025  // Step size while manually probing Z axis.
+  #endif  // MANUAL_BED_LEVELING
+
 #endif  // MESH_BED_LEVELING
 
 //===========================================================================
diff --git a/Marlin/example_configurations/Hephestos/Configuration.h b/Marlin/example_configurations/Hephestos/Configuration.h
index e07e60c014..80786b40e2 100644
--- a/Marlin/example_configurations/Hephestos/Configuration.h
+++ b/Marlin/example_configurations/Hephestos/Configuration.h
@@ -403,16 +403,11 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 #endif
 
 //===========================================================================
-//=========================== Manual Bed Leveling ===========================
+//============================ Mesh Bed Leveling ============================
 //===========================================================================
 
-//#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
 //#define MESH_BED_LEVELING    // Enable mesh bed leveling.
 
-#if ENABLED(MANUAL_BED_LEVELING)
-  #define MBL_Z_STEP 0.025  // Step size while manually probing Z axis.
-#endif  // MANUAL_BED_LEVELING
-
 #if ENABLED(MESH_BED_LEVELING)
   #define MESH_MIN_X 10
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
@@ -421,6 +416,13 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
   #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
+
+  //#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
+
+  #if ENABLED(MANUAL_BED_LEVELING)
+    #define MBL_Z_STEP 0.025  // Step size while manually probing Z axis.
+  #endif  // MANUAL_BED_LEVELING
+
 #endif  // MESH_BED_LEVELING
 
 //===========================================================================
diff --git a/Marlin/example_configurations/K8200/Configuration.h b/Marlin/example_configurations/K8200/Configuration.h
index 677e7e13eb..911c073351 100644
--- a/Marlin/example_configurations/K8200/Configuration.h
+++ b/Marlin/example_configurations/K8200/Configuration.h
@@ -399,16 +399,11 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 #endif
 
 //===========================================================================
-//=========================== Manual Bed Leveling ===========================
+//============================ Mesh Bed Leveling ============================
 //===========================================================================
 
-//#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
 //#define MESH_BED_LEVELING    // Enable mesh bed leveling.
 
-#if ENABLED(MANUAL_BED_LEVELING)
-  #define MBL_Z_STEP 0.025  // Step size while manually probing Z axis.
-#endif  // MANUAL_BED_LEVELING
-
 #if ENABLED(MESH_BED_LEVELING)
   #define MESH_MIN_X 10
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
@@ -417,6 +412,13 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
   #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
+
+  //#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
+
+  #if ENABLED(MANUAL_BED_LEVELING)
+    #define MBL_Z_STEP 0.025  // Step size while manually probing Z axis.
+  #endif  // MANUAL_BED_LEVELING
+
 #endif  // MESH_BED_LEVELING
 
 //===========================================================================
diff --git a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
index fbcb3f578e..17045eb706 100644
--- a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
+++ b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
@@ -411,16 +411,11 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 #endif
 
 //===========================================================================
-//=========================== Manual Bed Leveling ===========================
+//============================ Mesh Bed Leveling ============================
 //===========================================================================
 
-//#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
 //#define MESH_BED_LEVELING    // Enable mesh bed leveling.
 
-#if ENABLED(MANUAL_BED_LEVELING)
-  #define MBL_Z_STEP 0.025  // Step size while manually probing Z axis.
-#endif  // MANUAL_BED_LEVELING
-
 #if ENABLED(MESH_BED_LEVELING)
   #define MESH_MIN_X 10
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
@@ -429,6 +424,13 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
   #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
+
+  //#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
+
+  #if ENABLED(MANUAL_BED_LEVELING)
+    #define MBL_Z_STEP 0.025  // Step size while manually probing Z axis.
+  #endif  // MANUAL_BED_LEVELING
+
 #endif  // MESH_BED_LEVELING
 
 //===========================================================================
diff --git a/Marlin/example_configurations/RigidBot/Configuration.h b/Marlin/example_configurations/RigidBot/Configuration.h
index dd625d086f..c62528ba13 100644
--- a/Marlin/example_configurations/RigidBot/Configuration.h
+++ b/Marlin/example_configurations/RigidBot/Configuration.h
@@ -402,16 +402,11 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 #endif
 
 //===========================================================================
-//=========================== Manual Bed Leveling ===========================
+//============================ Mesh Bed Leveling ============================
 //===========================================================================
 
-//#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
 //#define MESH_BED_LEVELING    // Enable mesh bed leveling.
 
-#if ENABLED(MANUAL_BED_LEVELING)
-  #define MBL_Z_STEP 0.025  // Step size while manually probing Z axis.
-#endif  // MANUAL_BED_LEVELING
-
 #if ENABLED(MESH_BED_LEVELING)
   #define MESH_MIN_X 10
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
@@ -420,6 +415,13 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
   #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
+
+  //#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
+
+  #if ENABLED(MANUAL_BED_LEVELING)
+    #define MBL_Z_STEP 0.025  // Step size while manually probing Z axis.
+  #endif  // MANUAL_BED_LEVELING
+
 #endif  // MESH_BED_LEVELING
 
 //===========================================================================
diff --git a/Marlin/example_configurations/SCARA/Configuration.h b/Marlin/example_configurations/SCARA/Configuration.h
index c3431ab246..027e13cdf0 100644
--- a/Marlin/example_configurations/SCARA/Configuration.h
+++ b/Marlin/example_configurations/SCARA/Configuration.h
@@ -419,16 +419,11 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 #endif
 
 //===========================================================================
-//=========================== Manual Bed Leveling ===========================
+//============================ Mesh Bed Leveling ============================
 //===========================================================================
 
-//#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
 //#define MESH_BED_LEVELING    // Enable mesh bed leveling.
 
-#if ENABLED(MANUAL_BED_LEVELING)
-  #define MBL_Z_STEP 0.025  // Step size while manually probing Z axis.
-#endif  // MANUAL_BED_LEVELING
-
 #if ENABLED(MESH_BED_LEVELING)
   #define MESH_MIN_X 10
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
@@ -437,6 +432,13 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
   #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
+
+  //#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
+
+  #if ENABLED(MANUAL_BED_LEVELING)
+    #define MBL_Z_STEP 0.025  // Step size while manually probing Z axis.
+  #endif  // MANUAL_BED_LEVELING
+
 #endif  // MESH_BED_LEVELING
 
 //===========================================================================
diff --git a/Marlin/example_configurations/TAZ4/Configuration.h b/Marlin/example_configurations/TAZ4/Configuration.h
index eb29becca6..16dfc96cdf 100644
--- a/Marlin/example_configurations/TAZ4/Configuration.h
+++ b/Marlin/example_configurations/TAZ4/Configuration.h
@@ -431,16 +431,11 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 #endif
 
 //===========================================================================
-//=========================== Manual Bed Leveling ===========================
+//============================ Mesh Bed Leveling ============================
 //===========================================================================
 
-//#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
 //#define MESH_BED_LEVELING    // Enable mesh bed leveling.
 
-#if ENABLED(MANUAL_BED_LEVELING)
-  #define MBL_Z_STEP 0.025  // Step size while manually probing Z axis.
-#endif  // MANUAL_BED_LEVELING
-
 #if ENABLED(MESH_BED_LEVELING)
   #define MESH_MIN_X 10
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
@@ -449,6 +444,13 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
   #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
+
+  //#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
+
+  #if ENABLED(MANUAL_BED_LEVELING)
+    #define MBL_Z_STEP 0.025  // Step size while manually probing Z axis.
+  #endif  // MANUAL_BED_LEVELING
+
 #endif  // MESH_BED_LEVELING
 
 //===========================================================================
diff --git a/Marlin/example_configurations/WITBOX/Configuration.h b/Marlin/example_configurations/WITBOX/Configuration.h
index 26db2c01c3..955733499c 100644
--- a/Marlin/example_configurations/WITBOX/Configuration.h
+++ b/Marlin/example_configurations/WITBOX/Configuration.h
@@ -403,16 +403,11 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 #endif
 
 //===========================================================================
-//=========================== Manual Bed Leveling ===========================
+//============================ Mesh Bed Leveling ============================
 //===========================================================================
 
-//#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
 //#define MESH_BED_LEVELING    // Enable mesh bed leveling.
 
-#if ENABLED(MANUAL_BED_LEVELING)
-  #define MBL_Z_STEP 0.025  // Step size while manually probing Z axis.
-#endif  // MANUAL_BED_LEVELING
-
 #if ENABLED(MESH_BED_LEVELING)
   #define MESH_MIN_X 10
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
@@ -421,6 +416,13 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
   #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
+
+  //#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
+
+  #if ENABLED(MANUAL_BED_LEVELING)
+    #define MBL_Z_STEP 0.025  // Step size while manually probing Z axis.
+  #endif  // MANUAL_BED_LEVELING
+
 #endif  // MESH_BED_LEVELING
 
 //===========================================================================
diff --git a/Marlin/example_configurations/adafruit/ST7565/Configuration.h b/Marlin/example_configurations/adafruit/ST7565/Configuration.h
index d14f06d727..c09c586f00 100644
--- a/Marlin/example_configurations/adafruit/ST7565/Configuration.h
+++ b/Marlin/example_configurations/adafruit/ST7565/Configuration.h
@@ -411,16 +411,11 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 #endif
 
 //===========================================================================
-//=========================== Manual Bed Leveling ===========================
+//============================ Mesh Bed Leveling ============================
 //===========================================================================
 
-//#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
 //#define MESH_BED_LEVELING    // Enable mesh bed leveling.
 
-#if ENABLED(MANUAL_BED_LEVELING)
-  #define MBL_Z_STEP 0.025  // Step size while manually probing Z axis.
-#endif  // MANUAL_BED_LEVELING
-
 #if ENABLED(MESH_BED_LEVELING)
   #define MESH_MIN_X 10
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
@@ -429,6 +424,13 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
   #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
+
+  //#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
+
+  #if ENABLED(MANUAL_BED_LEVELING)
+    #define MBL_Z_STEP 0.025  // Step size while manually probing Z axis.
+  #endif  // MANUAL_BED_LEVELING
+
 #endif  // MESH_BED_LEVELING
 
 //===========================================================================
diff --git a/Marlin/example_configurations/delta/biv2.5/Configuration.h b/Marlin/example_configurations/delta/biv2.5/Configuration.h
index a171c53bdb..b4c29b0d98 100644
--- a/Marlin/example_configurations/delta/biv2.5/Configuration.h
+++ b/Marlin/example_configurations/delta/biv2.5/Configuration.h
@@ -446,16 +446,11 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 #endif
 
 //===========================================================================
-//=========================== Manual Bed Leveling ===========================
+//============================ Mesh Bed Leveling ============================
 //===========================================================================
 
-//#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
 //#define MESH_BED_LEVELING    // Enable mesh bed leveling.
 
-#if ENABLED(MANUAL_BED_LEVELING)
-  #define MBL_Z_STEP 0.025  // Step size while manually probing Z axis.
-#endif  // MANUAL_BED_LEVELING
-
 #if ENABLED(MESH_BED_LEVELING)
   #define MESH_MIN_X 10
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
@@ -464,6 +459,13 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
   #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
+
+  //#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
+
+  #if ENABLED(MANUAL_BED_LEVELING)
+    #define MBL_Z_STEP 0.025  // Step size while manually probing Z axis.
+  #endif  // MANUAL_BED_LEVELING
+
 #endif  // MESH_BED_LEVELING
 
 //===========================================================================
diff --git a/Marlin/example_configurations/delta/generic/Configuration.h b/Marlin/example_configurations/delta/generic/Configuration.h
index 5d72ca7cd3..e4109605cc 100644
--- a/Marlin/example_configurations/delta/generic/Configuration.h
+++ b/Marlin/example_configurations/delta/generic/Configuration.h
@@ -446,16 +446,11 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 #endif
 
 //===========================================================================
-//=========================== Manual Bed Leveling ===========================
+//============================ Mesh Bed Leveling ============================
 //===========================================================================
 
-//#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
 //#define MESH_BED_LEVELING    // Enable mesh bed leveling.
 
-#if ENABLED(MANUAL_BED_LEVELING)
-  #define MBL_Z_STEP 0.025  // Step size while manually probing Z axis.
-#endif  // MANUAL_BED_LEVELING
-
 #if ENABLED(MESH_BED_LEVELING)
   #define MESH_MIN_X 10
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
@@ -464,6 +459,13 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
   #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
+
+  //#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
+
+  #if ENABLED(MANUAL_BED_LEVELING)
+    #define MBL_Z_STEP 0.025  // Step size while manually probing Z axis.
+  #endif  // MANUAL_BED_LEVELING
+
 #endif  // MESH_BED_LEVELING
 
 //===========================================================================
diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/kossel_mini/Configuration.h
index 9d789973d9..ac20bc3bba 100644
--- a/Marlin/example_configurations/delta/kossel_mini/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_mini/Configuration.h
@@ -446,16 +446,11 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 #endif
 
 //===========================================================================
-//=========================== Manual Bed Leveling ===========================
+//============================ Mesh Bed Leveling ============================
 //===========================================================================
 
-//#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
 //#define MESH_BED_LEVELING    // Enable mesh bed leveling.
 
-#if ENABLED(MANUAL_BED_LEVELING)
-  #define MBL_Z_STEP 0.025  // Step size while manually probing Z axis.
-#endif  // MANUAL_BED_LEVELING
-
 #if ENABLED(MESH_BED_LEVELING)
   #define MESH_MIN_X 10
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
@@ -464,6 +459,13 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
   #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
+
+  //#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
+
+  #if ENABLED(MANUAL_BED_LEVELING)
+    #define MBL_Z_STEP 0.025  // Step size while manually probing Z axis.
+  #endif  // MANUAL_BED_LEVELING
+
 #endif  // MESH_BED_LEVELING
 
 //===========================================================================
diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration.h b/Marlin/example_configurations/delta/kossel_pro/Configuration.h
index 824c6c9d7a..589ea59621 100644
--- a/Marlin/example_configurations/delta/kossel_pro/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_pro/Configuration.h
@@ -433,16 +433,11 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 #endif
 
 //===========================================================================
-//=========================== Manual Bed Leveling ===========================
+//============================ Mesh Bed Leveling ============================
 //===========================================================================
 
-//#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
 //#define MESH_BED_LEVELING    // Enable mesh bed leveling.
 
-#if ENABLED(MANUAL_BED_LEVELING)
-  #define MBL_Z_STEP 0.025  // Step size while manually probing Z axis.
-#endif  // MANUAL_BED_LEVELING
-
 #if ENABLED(MESH_BED_LEVELING)
   #define MESH_MIN_X 10
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
@@ -451,6 +446,13 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
   #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
+
+  //#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
+
+  #if ENABLED(MANUAL_BED_LEVELING)
+    #define MBL_Z_STEP 0.025  // Step size while manually probing Z axis.
+  #endif  // MANUAL_BED_LEVELING
+
 #endif  // MESH_BED_LEVELING
 
 //===========================================================================
diff --git a/Marlin/example_configurations/makibox/Configuration.h b/Marlin/example_configurations/makibox/Configuration.h
index 317e93dea3..1666026a33 100644
--- a/Marlin/example_configurations/makibox/Configuration.h
+++ b/Marlin/example_configurations/makibox/Configuration.h
@@ -414,16 +414,11 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 #endif
 
 //===========================================================================
-//=========================== Manual Bed Leveling ===========================
+//============================ Mesh Bed Leveling ============================
 //===========================================================================
 
-//#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
 //#define MESH_BED_LEVELING    // Enable mesh bed leveling.
 
-#if ENABLED(MANUAL_BED_LEVELING)
-  #define MBL_Z_STEP 0.025  // Step size while manually probing Z axis.
-#endif  // MANUAL_BED_LEVELING
-
 #if ENABLED(MESH_BED_LEVELING)
   #define MESH_MIN_X 10
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
@@ -432,6 +427,13 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
   #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
+
+  //#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
+
+  #if ENABLED(MANUAL_BED_LEVELING)
+    #define MBL_Z_STEP 0.025  // Step size while manually probing Z axis.
+  #endif  // MANUAL_BED_LEVELING
+
 #endif  // MESH_BED_LEVELING
 
 //===========================================================================
diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration.h b/Marlin/example_configurations/tvrrug/Round2/Configuration.h
index ffd058a754..99be7d21f5 100644
--- a/Marlin/example_configurations/tvrrug/Round2/Configuration.h
+++ b/Marlin/example_configurations/tvrrug/Round2/Configuration.h
@@ -401,16 +401,11 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 #endif
 
 //===========================================================================
-//=========================== Manual Bed Leveling ===========================
+//============================ Mesh Bed Leveling ============================
 //===========================================================================
 
-//#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
 //#define MESH_BED_LEVELING    // Enable mesh bed leveling.
 
-#if ENABLED(MANUAL_BED_LEVELING)
-  #define MBL_Z_STEP 0.025  // Step size while manually probing Z axis.
-#endif  // MANUAL_BED_LEVELING
-
 #if ENABLED(MESH_BED_LEVELING)
   #define MESH_MIN_X 10
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
@@ -419,6 +414,13 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
   #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
+
+  //#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
+
+  #if ENABLED(MANUAL_BED_LEVELING)
+    #define MBL_Z_STEP 0.025  // Step size while manually probing Z axis.
+  #endif  // MANUAL_BED_LEVELING
+
 #endif  // MESH_BED_LEVELING
 
 //===========================================================================