Add support for TMC2660 (#11998)

This commit is contained in:
teemuatlut 2018-10-07 01:18:10 +03:00 committed by Scott Lahteine
parent cf0b9eb37c
commit c447d75916
11 changed files with 278 additions and 62 deletions

View File

@ -739,7 +739,7 @@ void setup() {
SERIAL_PROTOCOLLNPGM("start");
SERIAL_ECHO_START();
#if HAS_DRIVER(TMC2130)
#if TMC_HAS_SPI
#if DISABLED(TMC_USE_SW_SPI)
SPI.begin();
#endif

View File

@ -37,10 +37,10 @@
#define TMC2208_STANDALONE 0x00A
#define TMC26X 0x10B
#define TMC26X_STANDALONE 0x00B
#define TMC2660 0x10C
#define TMC2660 2660
#define TMC2660_STANDALONE 0x00C
#define _AXIS_DRIVER_TYPE(A,T) ( defined(A##_DRIVER_TYPE) && (A##_DRIVER_TYPE == T) )
#define _AXIS_DRIVER_TYPE(A,T) (defined(A##_DRIVER_TYPE) && (A##_DRIVER_TYPE == T))
#define AXIS_DRIVER_TYPE_X(T) _AXIS_DRIVER_TYPE(X,T)
#define AXIS_DRIVER_TYPE_Y(T) _AXIS_DRIVER_TYPE(Y,T)
@ -67,7 +67,8 @@
// Test for supported TMC drivers that require advanced configuration
// Does not match standalone configurations
#define HAS_TRINAMIC (HAS_DRIVER(TMC2130) || HAS_DRIVER(TMC2208))
#define HAS_TRINAMIC (HAS_DRIVER(TMC2130) || HAS_DRIVER(TMC2208) || HAS_DRIVER(TMC2660))
#define AXIS_IS_TMC(A) ( AXIS_DRIVER_TYPE_##A(TMC2130) || \
AXIS_DRIVER_TYPE_##A(TMC2208) )
AXIS_DRIVER_TYPE_##A(TMC2208) || \
AXIS_DRIVER_TYPE_##A(TMC2660) )

View File

@ -310,7 +310,7 @@ bool unload_filament(const float &unload_length, const bool show_lcd/*=false*/,
#endif
// Disable extruders steppers for manual filament changing (only on boards that have separate ENABLE_PINS)
#if E0_ENABLE_PIN != X_ENABLE_PIN && E1_ENABLE_PIN != Y_ENABLE_PIN
#if (E0_ENABLE_PIN != X_ENABLE_PIN && E1_ENABLE_PIN != Y_ENABLE_PIN) || AXIS_DRIVER_TYPE(E0, TMC2660) || AXIS_DRIVER_TYPE(E1, TMC2660) || AXIS_DRIVER_TYPE(E2, TMC2660) || AXIS_DRIVER_TYPE(E3, TMC2660) || AXIS_DRIVER_TYPE(E4, TMC2660) || AXIS_DRIVER_TYPE(E5, TMC2660)
disable_e_stepper(active_extruder);
safe_delay(100);
#endif

View File

@ -53,8 +53,10 @@
bool is_error;
};
#if HAS_DRIVER(TMC2130)
static uint32_t get_pwm_scale(TMC2130Stepper &st) { return st.PWM_SCALE(); }
static uint8_t get_status_response(TMC2130Stepper &st) { return st.status_response & 0xF; }
#if ENABLED(TMC_DEBUG)
static uint32_t get_pwm_scale(TMC2130Stepper &st) { return st.PWM_SCALE(); }
static uint8_t get_status_response(TMC2130Stepper &st) { return st.status_response & 0xF; }
#endif
static TMC_driver_data get_driver_data(TMC2130Stepper &st) {
constexpr uint32_t OTPW_bm = 0x4000000UL;
constexpr uint8_t OTPW_bp = 26;
@ -71,15 +73,17 @@
}
#endif
#if HAS_DRIVER(TMC2208)
static uint32_t get_pwm_scale(TMC2208Stepper &st) { return st.pwm_scale_sum(); }
static uint8_t get_status_response(TMC2208Stepper &st) {
uint32_t drv_status = st.DRV_STATUS();
uint8_t gstat = st.GSTAT();
uint8_t response = 0;
response |= (drv_status >> (31-3)) & 0b1000;
response |= gstat & 0b11;
return response;
}
#if ENABLED(TMC_DEBUG)
static uint32_t get_pwm_scale(TMC2208Stepper &st) { return st.pwm_scale_sum(); }
static uint8_t get_status_response(TMC2208Stepper &st) {
uint32_t drv_status = st.DRV_STATUS();
uint8_t gstat = st.GSTAT();
uint8_t response = 0;
response |= (drv_status >> (31-3)) & 0b1000;
response |= gstat & 0b11;
return response;
}
#endif
static TMC_driver_data get_driver_data(TMC2208Stepper &st) {
constexpr uint32_t OTPW_bm = 0b1ul;
constexpr uint8_t OTPW_bp = 0;
@ -93,6 +97,25 @@
return data;
}
#endif
#if HAS_DRIVER(TMC2660)
#if ENABLED(TMC_DEBUG)
static uint32_t get_pwm_scale(TMC2660Stepper) { return 0; }
static uint8_t get_status_response(TMC2660Stepper) { return 0; }
#endif
static TMC_driver_data get_driver_data(TMC2660Stepper &st) {
constexpr uint32_t OTPW_bm = 0x4UL;
constexpr uint8_t OTPW_bp = 2;
constexpr uint32_t OT_bm = 0x2UL;
constexpr uint8_t OT_bp = 1;
constexpr uint8_t DRIVER_ERROR_bm = 0x1EUL;
TMC_driver_data data;
data.drv_status = st.DRVSTATUS();
data.is_otpw = (data.drv_status & OTPW_bm) >> OTPW_bp;
data.is_ot = (data.drv_status & OT_bm) >> OT_bp;
data.is_error = data.drv_status & DRIVER_ERROR_bm;
return data;
}
#endif
template<typename TMC>
void monitor_tmc_driver(TMC &st) {
@ -161,7 +184,7 @@
#endif
}
#define HAS_HW_COMMS(ST) AXIS_DRIVER_TYPE(ST, TMC2130) || (AXIS_DRIVER_TYPE(ST, TMC2208) && defined(ST##_HARDWARE_SERIAL))
#define HAS_HW_COMMS(ST) AXIS_DRIVER_TYPE(ST, TMC2130) || AXIS_DRIVER_TYPE(ST, TMC2660) || (AXIS_DRIVER_TYPE(ST, TMC2208) && defined(ST##_HARDWARE_SERIAL))
void monitor_tmc_driver() {
static millis_t next_cOT = 0;
@ -217,6 +240,16 @@
#if ENABLED(TMC_DEBUG)
/**
* M122 S[1,0] Enable periodic status reports
*/
#if ENABLED(MONITOR_DRIVER_STATUS)
void tmc_set_report_status(const bool status) {
if ((report_tmc_status = status))
SERIAL_ECHOLNPGM("axis:pwm_scale |status_response|");
}
#endif
enum TMC_debug_enum : char {
TMC_CODES,
TMC_ENABLED,
@ -291,6 +324,7 @@
case TMC_STALLGUARD: if (st.stallguard()) SERIAL_CHAR('X'); break;
case TMC_SG_RESULT: SERIAL_PRINT(st.sg_result(), DEC); break;
case TMC_FSACTIVE: if (st.fsactive()) SERIAL_CHAR('X'); break;
case TMC_DRV_CS_ACTUAL: SERIAL_PRINT(st.cs_actual(), DEC); break;
default: break;
}
}
@ -312,11 +346,16 @@
case TMC_T150: if (st.t150()) SERIAL_CHAR('X'); break;
case TMC_T143: if (st.t143()) SERIAL_CHAR('X'); break;
case TMC_T120: if (st.t120()) SERIAL_CHAR('X'); break;
case TMC_DRV_CS_ACTUAL: SERIAL_PRINT(st.cs_actual(), DEC); break;
default: break;
}
}
#endif
#if HAS_DRIVER(TMC2660)
static void _tmc_parse_drv_status(TMC2660Stepper, const TMC_drv_status_enum) { }
#endif
template <typename TMC>
static void tmc_status(TMC &st, const TMC_debug_enum i, const float spmm) {
SERIAL_ECHO('\t');
@ -355,7 +394,9 @@
}
break;
case TMC_OTPW: serialprintPGM(st.otpw() ? PSTR("true") : PSTR("false")); break;
case TMC_OTPW_TRIGGERED: serialprintPGM(st.getOTPW() ? PSTR("true") : PSTR("false")); break;
#if ENABLED(MONITOR_DRIVER_STATUS)
case TMC_OTPW_TRIGGERED: serialprintPGM(st.getOTPW() ? PSTR("true") : PSTR("false")); break;
#endif
case TMC_TOFF: SERIAL_PRINT(st.toff(), DEC); break;
case TMC_TBL: SERIAL_PRINT(st.blank_time(), DEC); break;
case TMC_HEND: SERIAL_PRINT(st.hysteresis_end(), DEC); break;
@ -364,6 +405,34 @@
}
}
#if HAS_DRIVER(TMC2660)
template<char AXIS_LETTER, char DRIVER_ID>
void tmc_status(TMCMarlin<TMC2660Stepper, AXIS_LETTER, DRIVER_ID> &st, const TMC_debug_enum i, const float) {
SERIAL_ECHO('\t');
switch (i) {
case TMC_CODES: st.printLabel(); break;
case TMC_ENABLED: serialprintPGM(st.isEnabled() ? PSTR("true") : PSTR("false")); break;
case TMC_CURRENT: SERIAL_ECHO(st.getMilliamps()); break;
case TMC_RMS_CURRENT: SERIAL_PROTOCOL(st.rms_current()); break;
case TMC_MAX_CURRENT: SERIAL_PRINT((float)st.rms_current() * 1.41, 0); break;
case TMC_IRUN:
SERIAL_PRINT(st.cs(), DEC);
SERIAL_ECHOPGM("/31");
break;
case TMC_VSENSE: serialprintPGM(st.vsense() ? PSTR("1=.165") : PSTR("0=.310")); break;
case TMC_MICROSTEPS: SERIAL_ECHO(st.microsteps()); break;
//case TMC_OTPW: serialprintPGM(st.otpw() ? PSTR("true") : PSTR("false")); break;
//case TMC_OTPW_TRIGGERED: serialprintPGM(st.getOTPW() ? PSTR("true") : PSTR("false")); break;
case TMC_SGT: SERIAL_PRINT(st.sgt(), DEC); break;
case TMC_TOFF: SERIAL_PRINT(st.toff(), DEC); break;
case TMC_TBL: SERIAL_PRINT(st.blank_time(), DEC); break;
case TMC_HEND: SERIAL_PRINT(st.hysteresis_end(), DEC); break;
case TMC_HSTRT: SERIAL_PRINT(st.hysteresis_start(), DEC); break;
default: break;
}
}
#endif
template <typename TMC>
static void tmc_parse_drv_status(TMC &st, const TMC_drv_status_enum i) {
SERIAL_CHAR('\t');
@ -376,7 +445,6 @@
case TMC_S2GA: if (st.s2ga()) SERIAL_CHAR('X'); break;
case TMC_DRV_OTPW: if (st.otpw()) SERIAL_CHAR('X'); break;
case TMC_OT: if (st.ot()) SERIAL_CHAR('X'); break;
case TMC_DRV_CS_ACTUAL: SERIAL_PRINT(st.cs_actual(), DEC); break;
case TMC_DRV_STATUS_HEX:
st.printLabel();
SERIAL_ECHOPGM("\t0x");
@ -503,10 +571,6 @@
/**
* M122 report functions
*/
void tmc_set_report_status(const bool status) {
if ((report_tmc_status = status))
SERIAL_ECHOLNPGM("axis:pwm_scale |status_response|");
}
void tmc_report_all() {
#define TMC_REPORT(LABEL, ITEM) do{ SERIAL_ECHOPGM(LABEL); tmc_debug_loop(ITEM); }while(0)
@ -527,8 +591,10 @@
TMC_REPORT("pwm\nthreshold\t", TMC_TPWMTHRS);
TMC_REPORT("[mm/s]\t", TMC_TPWMTHRS_MMS);
TMC_REPORT("OT prewarn", TMC_OTPW);
TMC_REPORT("OT prewarn has\n"
"been triggered", TMC_OTPW_TRIGGERED);
#if ENABLED(MONITOR_DRIVER_STATUS)
TMC_REPORT("OT prewarn has\n"
"been triggered", TMC_OTPW_TRIGGERED);
#endif
TMC_REPORT("off time\t", TMC_TOFF);
TMC_REPORT("blank time", TMC_TBL);
TMC_REPORT("hysteresis\n-end\t", TMC_HEND);
@ -571,53 +637,55 @@
#endif
st.diag1_stall(enable ? 1 : 0);
}
void tmc_sensorless_homing(TMC2660Stepper &st, const bool enable) {
// TODO
}
#endif // USE_SENSORLESS
#if HAS_DRIVER(TMC2130)
#define IS_TMC_SPI(ST) AXIS_DRIVER_TYPE(ST, TMC2130)
#if TMC_HAS_SPI
#define SET_CS_PIN(st) OUT_WRITE(st##_CS_PIN, HIGH)
void tmc_init_cs_pins() {
#if IS_TMC_SPI(X)
#if AXIS_HAS_SPI(X)
SET_CS_PIN(X);
#endif
#if IS_TMC_SPI(Y)
#if AXIS_HAS_SPI(Y)
SET_CS_PIN(Y);
#endif
#if IS_TMC_SPI(Z)
#if AXIS_HAS_SPI(Z)
SET_CS_PIN(Z);
#endif
#if IS_TMC_SPI(X2)
#if AXIS_HAS_SPI(X2)
SET_CS_PIN(X2);
#endif
#if IS_TMC_SPI(Y2)
#if AXIS_HAS_SPI(Y2)
SET_CS_PIN(Y2);
#endif
#if IS_TMC_SPI(Z2)
#if AXIS_HAS_SPI(Z2)
SET_CS_PIN(Z2);
#endif
#if IS_TMC_SPI(Z3)
#if AXIS_HAS_SPI(Z3)
SET_CS_PIN(Z3);
#endif
#if IS_TMC_SPI(E0)
#if AXIS_HAS_SPI(E0)
SET_CS_PIN(E0);
#endif
#if IS_TMC_SPI(E1)
#if AXIS_HAS_SPI(E1)
SET_CS_PIN(E1);
#endif
#if IS_TMC_SPI(E2)
#if AXIS_HAS_SPI(E2)
SET_CS_PIN(E2);
#endif
#if IS_TMC_SPI(E3)
#if AXIS_HAS_SPI(E3)
SET_CS_PIN(E3);
#endif
#if IS_TMC_SPI(E4)
#if AXIS_HAS_SPI(E4)
SET_CS_PIN(E4);
#endif
#if IS_TMC_SPI(E5)
#if AXIS_HAS_SPI(E5)
SET_CS_PIN(E5);
#endif
}
#endif // TMC2130
#endif // TMC_HAS_SPI
#endif // HAS_TRINAMIC

View File

@ -158,7 +158,9 @@ void tmc_set_sgt(TMC &st, const int8_t sgt_val) {
void monitor_tmc_driver();
#if ENABLED(TMC_DEBUG)
void tmc_set_report_status(const bool status);
#if ENABLED(MONITOR_DRIVER_STATUS)
void tmc_set_report_status(const bool status);
#endif
void tmc_report_all();
#endif
@ -171,9 +173,10 @@ void monitor_tmc_driver();
*/
#if USE_SENSORLESS
void tmc_stallguard(TMC2130Stepper &st, const bool enable=true);
void tmc_stallguard(TMC2660Stepper &st, const bool enable=true);
#endif
#if HAS_DRIVER(TMC2130)
#if TMC_HAS_SPI
void tmc_init_cs_pins();
#endif

View File

@ -54,7 +54,8 @@ void GcodeSuite::M18_M84() {
if (parser.seen('X')) disable_X();
if (parser.seen('Y')) disable_Y();
if (parser.seen('Z')) disable_Z();
#if E0_ENABLE_PIN != X_ENABLE_PIN && E1_ENABLE_PIN != Y_ENABLE_PIN // Only disable on boards that have separate ENABLE_PINS
// Only disable on boards that have separate ENABLE_PINS or another method for disabling the driver
#if (E0_ENABLE_PIN != X_ENABLE_PIN && E1_ENABLE_PIN != Y_ENABLE_PIN) || AXIS_DRIVER_TYPE(E0, TMC2660) || AXIS_DRIVER_TYPE(E1, TMC2660) || AXIS_DRIVER_TYPE(E2, TMC2660) || AXIS_DRIVER_TYPE(E3, TMC2660) || AXIS_DRIVER_TYPE(E4, TMC2660) || AXIS_DRIVER_TYPE(E5, TMC2660)
if (parser.seen('E')) disable_e_steppers();
#endif
}

View File

@ -31,10 +31,14 @@
* M122: Debug TMC drivers
*/
void GcodeSuite::M122() {
if (parser.seen('S'))
tmc_set_report_status(parser.value_bool());
else
tmc_report_all();
#if ENABLED(MONITOR_DRIVER_STATUS)
if (parser.seen('S'))
tmc_set_report_status(parser.value_bool());
else
#endif
tmc_report_all();
}
#endif // TMC_DEBUG

View File

@ -461,7 +461,7 @@
* Preserve this ordering when adding new drivers.
*/
#define TRINAMICS (HAS_TRINAMIC || HAS_DRIVER(TMC2660) || HAS_DRIVER(TMC2130_STANDALONE) || HAS_DRIVER(TMC2208_STANDALONE) || HAS_DRIVER(TMC26X_STANDALONE) || HAS_DRIVER(TMC2660_STANDALONE))
#define TRINAMICS (HAS_TRINAMIC || HAS_DRIVER(TMC2130_STANDALONE) || HAS_DRIVER(TMC2208_STANDALONE) || HAS_DRIVER(TMC26X_STANDALONE) || HAS_DRIVER(TMC2660_STANDALONE))
#ifndef MINIMUM_STEPPER_DIR_DELAY
#if HAS_DRIVER(TB6560)
@ -867,20 +867,24 @@
#define HAS_SOLENOID_5 (PIN_EXISTS(SOL5))
// Trinamic Stepper Drivers
#define HAS_STEALTHCHOP (HAS_DRIVER(TMC2130) || HAS_DRIVER(TMC2208))
#define HAS_STALLGUARD HAS_DRIVER(TMC2130)
#define AXIS_HAS_STEALTHCHOP(ST) ( AXIS_DRIVER_TYPE(ST, TMC2130) || AXIS_DRIVER_TYPE(ST, TMC2208) )
#define AXIS_HAS_STALLGUARD(ST) AXIS_DRIVER_TYPE(ST, TMC2130)
#if HAS_TRINAMIC
#define TMC_HAS_SPI (HAS_DRIVER(TMC2130) || HAS_DRIVER(TMC2660))
#define HAS_STALLGUARD (HAS_DRIVER(TMC2130) || HAS_DRIVER(TMC2660))
#define HAS_STEALTHCHOP (HAS_DRIVER(TMC2130) || HAS_DRIVER(TMC2208))
#define AXIS_HAS_SPI(ST) (AXIS_DRIVER_TYPE(ST, TMC2130) || AXIS_DRIVER_TYPE(ST, TMC2660))
#define AXIS_HAS_STALLGUARD(ST) (AXIS_DRIVER_TYPE(ST, TMC2130) || AXIS_DRIVER_TYPE(ST, TMC2660))
#define AXIS_HAS_STEALTHCHOP(ST) (AXIS_DRIVER_TYPE(ST, TMC2130) || AXIS_DRIVER_TYPE(ST, TMC2208))
#define USE_SENSORLESS (ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING))
#if USE_SENSORLESS
// Disable Z axis sensorless homing if a probe is used to home the Z axis
#if HOMING_Z_WITH_PROBE
#undef Z_STALL_SENSITIVITY
#define USE_SENSORLESS (ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING))
#if USE_SENSORLESS
// Disable Z axis sensorless homing if a probe is used to home the Z axis
#if HOMING_Z_WITH_PROBE
#undef Z_STALL_SENSITIVITY
#endif
#define X_SENSORLESS (AXIS_HAS_STALLGUARD(X) && defined(X_STALL_SENSITIVITY))
#define Y_SENSORLESS (AXIS_HAS_STALLGUARD(Y) && defined(Y_STALL_SENSITIVITY))
#define Z_SENSORLESS (AXIS_HAS_STALLGUARD(Z) && defined(Z_STALL_SENSITIVITY))
#endif
#define X_SENSORLESS (AXIS_HAS_STALLGUARD(X) && defined(X_STALL_SENSITIVITY))
#define Y_SENSORLESS (AXIS_HAS_STALLGUARD(Y) && defined(Y_STALL_SENSITIVITY))
#define Z_SENSORLESS (AXIS_HAS_STALLGUARD(Z) && defined(Z_STALL_SENSITIVITY))
#endif
// Endstops and bed probe

View File

@ -487,6 +487,74 @@
}
#endif // TMC2208
//
// TMC2660 Driver objects and inits
//
#if HAS_DRIVER(TMC2660)
#include <SPI.h>
#include "planner.h"
#include "../core/enum.h"
#if ENABLED(TMC_USE_SW_SPI)
#define _TMC2660_DEFINE(ST, L) TMCMarlin<TMC2660Stepper, L> stepper##ST(ST##_CS_PIN, R_SENSE, TMC_SW_MOSI, TMC_SW_MISO, TMC_SW_SCK)
#define TMC2660_DEFINE(ST) _TMC2660_DEFINE(ST, TMC_##ST##_LABEL)
#else
#define _TMC2660_DEFINE(ST, L) TMCMarlin<TMC2660Stepper, L> stepper##ST(ST##_CS_PIN, R_SENSE)
#define TMC2660_DEFINE(ST) _TMC2660_DEFINE(ST, TMC_##ST##_LABEL)
#endif
// Stepper objects of TMC2660 steppers used
#if AXIS_DRIVER_TYPE(X, TMC2660)
TMC2660_DEFINE(X);
#endif
#if AXIS_DRIVER_TYPE(X2, TMC2660)
TMC2660_DEFINE(X2);
#endif
#if AXIS_DRIVER_TYPE(Y, TMC2660)
TMC2660_DEFINE(Y);
#endif
#if AXIS_DRIVER_TYPE(Y2, TMC2660)
TMC2660_DEFINE(Y2);
#endif
#if AXIS_DRIVER_TYPE(Z, TMC2660)
TMC2660_DEFINE(Z);
#endif
#if AXIS_DRIVER_TYPE(Z2, TMC2660)
TMC2660_DEFINE(Z2);
#endif
#if AXIS_DRIVER_TYPE(E0, TMC2660)
TMC2660_DEFINE(E0);
#endif
#if AXIS_DRIVER_TYPE(E1, TMC2660)
TMC2660_DEFINE(E1);
#endif
#if AXIS_DRIVER_TYPE(E2, TMC2660)
TMC2660_DEFINE(E2);
#endif
#if AXIS_DRIVER_TYPE(E3, TMC2660)
TMC2660_DEFINE(E3);
#endif
#if AXIS_DRIVER_TYPE(E4, TMC2660)
TMC2660_DEFINE(E4);
#endif
#if AXIS_DRIVER_TYPE(E5, TMC2660)
TMC2660_DEFINE(E5);
#endif
template<char AXIS_LETTER, char DRIVER_ID>
void tmc_init(TMCMarlin<TMC2660Stepper, AXIS_LETTER, DRIVER_ID> &st, const uint16_t mA, const uint16_t microsteps, const uint32_t, const float) {
st.begin();
st.rms_current(mA);
st.microsteps(microsteps);
st.blank_time(24);
st.toff(5); // Only enables the driver if used with stealthChop
st.intpol(INTERPOLATE);
//st.hysteresis_start(3);
//st.hysteresis_end(2);
}
#endif // TMC2660
void restore_stepper_drivers() {
#if AXIS_IS_TMC(X)
stepperX.push();

View File

@ -101,6 +101,10 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
#define X_ENABLE_INIT NOOP
#define X_ENABLE_WRITE(STATE) stepperX.setEnabled(STATE)
#define X_ENABLE_READ stepperX.isEnabled()
#elif AXIS_DRIVER_TYPE(X, TMC2660)
#define X_ENABLE_INIT NOOP
#define X_ENABLE_WRITE(STATE) stepperX.toff((STATE)==X_ENABLE_ON ? stepperX.savedToff() : 0)
#define X_ENABLE_READ stepperX.isEnabled()
#else
#define X_ENABLE_INIT SET_OUTPUT(X_ENABLE_PIN)
#define X_ENABLE_WRITE(STATE) WRITE(X_ENABLE_PIN,STATE)
@ -132,6 +136,10 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
#define Y_ENABLE_INIT NOOP
#define Y_ENABLE_WRITE(STATE) stepperY.setEnabled(STATE)
#define Y_ENABLE_READ stepperY.isEnabled()
#elif AXIS_DRIVER_TYPE(Y, TMC2660)
#define Y_ENABLE_INIT NOOP
#define Y_ENABLE_WRITE(STATE) stepperY.toff((STATE)==Y_ENABLE_ON ? stepperY.savedToff() : 0)
#define Y_ENABLE_READ stepperY.isEnabled()
#else
#define Y_ENABLE_INIT SET_OUTPUT(Y_ENABLE_PIN)
#define Y_ENABLE_WRITE(STATE) WRITE(Y_ENABLE_PIN,STATE)
@ -163,6 +171,10 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
#define Z_ENABLE_INIT NOOP
#define Z_ENABLE_WRITE(STATE) stepperZ.setEnabled(STATE)
#define Z_ENABLE_READ stepperZ.isEnabled()
#elif AXIS_DRIVER_TYPE(Z, TMC2660)
#define Z_ENABLE_INIT NOOP
#define Z_ENABLE_WRITE(STATE) stepperZ.toff((STATE)==Z_ENABLE_ON ? stepperZ.savedToff() : 0)
#define Z_ENABLE_READ stepperZ.isEnabled()
#else
#define Z_ENABLE_INIT SET_OUTPUT(Z_ENABLE_PIN)
#define Z_ENABLE_WRITE(STATE) WRITE(Z_ENABLE_PIN,STATE)
@ -195,6 +207,10 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
#define X2_ENABLE_INIT NOOP
#define X2_ENABLE_WRITE(STATE) stepperX2.setEnabled(STATE)
#define X2_ENABLE_READ stepperX2.isEnabled()
#elif AXIS_DRIVER_TYPE(X2, TMC2660)
#define X2_ENABLE_INIT NOOP
#define X2_ENABLE_WRITE(STATE) stepperX2.toff((STATE)==X_ENABLE_ON ? stepperX2.savedToff() : 0)
#define X2_ENABLE_READ stepperX2.isEnabled()
#else
#define X2_ENABLE_INIT SET_OUTPUT(X2_ENABLE_PIN)
#define X2_ENABLE_WRITE(STATE) WRITE(X2_ENABLE_PIN,STATE)
@ -228,6 +244,10 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
#define Y2_ENABLE_INIT NOOP
#define Y2_ENABLE_WRITE(STATE) stepperY2.setEnabled(STATE)
#define Y2_ENABLE_READ stepperY2.isEnabled()
#elif AXIS_DRIVER_TYPE(Y2, TMC2660)
#define Y2_ENABLE_INIT NOOP
#define Y2_ENABLE_WRITE(STATE) stepperY2.toff((STATE)==Y_ENABLE_ON ? stepperY2.savedToff() : 0)
#define Y2_ENABLE_READ stepperY2.isEnabled()
#else
#define Y2_ENABLE_INIT SET_OUTPUT(Y2_ENABLE_PIN)
#define Y2_ENABLE_WRITE(STATE) WRITE(Y2_ENABLE_PIN,STATE)
@ -261,6 +281,10 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
#define Z2_ENABLE_INIT NOOP
#define Z2_ENABLE_WRITE(STATE) stepperZ2.setEnabled(STATE)
#define Z2_ENABLE_READ stepperZ2.isEnabled()
#elif AXIS_DRIVER_TYPE(Z2, TMC2660)
#define Z2_ENABLE_INIT NOOP
#define Z2_ENABLE_WRITE(STATE) stepperZ2.toff((STATE)==Z_ENABLE_ON ? stepperZ2.savedToff() : 0)
#define Z2_ENABLE_READ stepperZ2.isEnabled()
#else
#define Z2_ENABLE_INIT SET_OUTPUT(Z2_ENABLE_PIN)
#define Z2_ENABLE_WRITE(STATE) WRITE(Z2_ENABLE_PIN,STATE)
@ -294,6 +318,10 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
#define Z3_ENABLE_INIT NOOP
#define Z3_ENABLE_WRITE(STATE) stepperZ3.setEnabled(STATE)
#define Z3_ENABLE_READ stepperZ3.isEnabled()
#elif AXIS_DRIVER_TYPE(Z3, TMC2660)
#define Z3_ENABLE_INIT NOOP
#define Z3_ENABLE_WRITE(STATE) stepperZ3.toff((STATE)==Z_ENABLE_ON ? stepperZ3.savedToff() : 0)
#define Z3_ENABLE_READ stepperZ3.isEnabled()
#else
#define Z3_ENABLE_INIT SET_OUTPUT(Z3_ENABLE_PIN)
#define Z3_ENABLE_WRITE(STATE) WRITE(Z3_ENABLE_PIN,STATE)
@ -326,6 +354,10 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
#define E0_ENABLE_INIT NOOP
#define E0_ENABLE_WRITE(STATE) stepperE0.setEnabled(STATE)
#define E0_ENABLE_READ stepperE0.isEnabled()
#elif AXIS_DRIVER_TYPE(E0, TMC2660)
#define E0_ENABLE_INIT NOOP
#define E0_ENABLE_WRITE(STATE) stepperE0.toff((STATE)==E_ENABLE_ON ? stepperE0.savedToff() : 0)
#define E0_ENABLE_READ stepperE0.isEnabled()
#else
#define E0_ENABLE_INIT SET_OUTPUT(E0_ENABLE_PIN)
#define E0_ENABLE_WRITE(STATE) WRITE(E0_ENABLE_PIN,STATE)
@ -357,6 +389,10 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
#define E1_ENABLE_INIT NOOP
#define E1_ENABLE_WRITE(STATE) stepperE1.setEnabled(STATE)
#define E1_ENABLE_READ stepperE1.isEnabled()
#elif AXIS_DRIVER_TYPE(E1, TMC2660)
#define E1_ENABLE_INIT NOOP
#define E1_ENABLE_WRITE(STATE) stepperE1.toff((STATE)==E_ENABLE_ON ? stepperE1.savedToff() : 0)
#define E1_ENABLE_READ stepperE1.isEnabled()
#else
#define E1_ENABLE_INIT SET_OUTPUT(E1_ENABLE_PIN)
#define E1_ENABLE_WRITE(STATE) WRITE(E1_ENABLE_PIN,STATE)
@ -388,6 +424,10 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
#define E2_ENABLE_INIT NOOP
#define E2_ENABLE_WRITE(STATE) stepperE2.setEnabled(STATE)
#define E2_ENABLE_READ stepperE2.isEnabled()
#elif AXIS_DRIVER_TYPE(E2, TMC2660)
#define E2_ENABLE_INIT NOOP
#define E2_ENABLE_WRITE(STATE) stepperE2.toff((STATE)==E_ENABLE_ON ? stepperE2.savedToff() : 0)
#define E2_ENABLE_READ stepperE2.isEnabled()
#else
#define E2_ENABLE_INIT SET_OUTPUT(E2_ENABLE_PIN)
#define E2_ENABLE_WRITE(STATE) WRITE(E2_ENABLE_PIN,STATE)
@ -419,6 +459,10 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
#define E3_ENABLE_INIT NOOP
#define E3_ENABLE_WRITE(STATE) stepperE3.setEnabled(STATE)
#define E3_ENABLE_READ stepperE3.isEnabled()
#elif AXIS_DRIVER_TYPE(E3, TMC2660)
#define E3_ENABLE_INIT NOOP
#define E3_ENABLE_WRITE(STATE) stepperE3.toff((STATE)==E_ENABLE_ON ? stepperE3.savedToff() : 0)
#define E3_ENABLE_READ stepperE3.isEnabled()
#else
#define E3_ENABLE_INIT SET_OUTPUT(E3_ENABLE_PIN)
#define E3_ENABLE_WRITE(STATE) WRITE(E3_ENABLE_PIN,STATE)
@ -450,6 +494,10 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
#define E4_ENABLE_INIT NOOP
#define E4_ENABLE_WRITE(STATE) stepperE4.setEnabled(STATE)
#define E4_ENABLE_READ stepperE4.isEnabled()
#elif AXIS_DRIVER_TYPE(E4, TMC2660)
#define E4_ENABLE_INIT NOOP
#define E4_ENABLE_WRITE(STATE) stepperE4.toff((STATE)==E_ENABLE_ON ? stepperE4.savedToff() : 0)
#define E4_ENABLE_READ stepperE4.isEnabled()
#else
#define E4_ENABLE_INIT SET_OUTPUT(E4_ENABLE_PIN)
#define E4_ENABLE_WRITE(STATE) WRITE(E4_ENABLE_PIN,STATE)
@ -481,6 +529,10 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
#define E5_ENABLE_INIT NOOP
#define E5_ENABLE_WRITE(STATE) stepperE5.setEnabled(STATE)
#define E5_ENABLE_READ stepperE5.isEnabled()
#elif AXIS_DRIVER_TYPE(E5, TMC2660)
#define E5_ENABLE_INIT NOOP
#define E5_ENABLE_WRITE(STATE) stepperE5.toff((STATE)==E_ENABLE_ON ? stepperE5.savedToff() : 0)
#define E5_ENABLE_READ stepperE5.isEnabled()
#else
#define E5_ENABLE_INIT SET_OUTPUT(E5_ENABLE_PIN)
#define E5_ENABLE_WRITE(STATE) WRITE(E5_ENABLE_PIN,STATE)

View File

@ -58,22 +58,37 @@
#define X_STEP_PIN P2_01
#define X_DIR_PIN P0_11
#define X_ENABLE_PIN P0_10
#ifndef X_CS_PIN
#define X_CS_PIN P0_10 // BSD2660 default
#endif
#define Y_STEP_PIN P2_02
#define Y_DIR_PIN P0_20
#define Y_ENABLE_PIN P0_19
#ifndef Y_CS_PIN
#define Y_CS_PIN P0_19 // BSD2660 default
#endif
#define Z_STEP_PIN P2_03
#define Z_DIR_PIN P0_22
#define Z_ENABLE_PIN P0_21
#ifndef Z_CS_PIN
#define Z_CS_PIN P0_21 // BSD2660 default
#endif
#define E0_STEP_PIN P2_00
#define E0_DIR_PIN P0_05
#define E0_ENABLE_PIN P0_04
#ifndef E0_CS_PIN
#define E0_CS_PIN P0_04 // BSD2660 default
#endif
#define E1_STEP_PIN P2_08
#define E1_DIR_PIN P2_13
#define E1_ENABLE_PIN P4_29
#ifndef E1_CS_PIN
#define E1_CS_PIN P4_29 // BSD2660 default
#endif
//
// Temperature Sensors