From c606ed447adc4ed27962c931b44a4f72b5d6fc8f Mon Sep 17 00:00:00 2001 From: Edward Patel Date: Thu, 24 Mar 2016 22:16:09 +0100 Subject: [PATCH] Add "G29 S4" to fine tune Z level for Mesh Bed Leveling. Also add mbl.z_offset to the EEPROM, bumping the version to V23. --- Marlin/Marlin_main.cpp | 24 ++++++++-- Marlin/configuration_store.cpp | 87 ++++++++++++++++++---------------- Marlin/language_en.h | 3 ++ Marlin/mesh_bed_leveling.cpp | 1 + Marlin/mesh_bed_leveling.h | 3 +- Marlin/ultralcd.cpp | 9 ++++ 6 files changed, 81 insertions(+), 46 deletions(-) diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp index edc36914c3..1c162666d2 100644 --- a/Marlin/Marlin_main.cpp +++ b/Marlin/Marlin_main.cpp @@ -2717,7 +2717,7 @@ inline void gcode_G28() { #if ENABLED(MESH_BED_LEVELING) - enum MeshLevelingState { MeshReport, MeshStart, MeshNext, MeshSet }; + enum MeshLevelingState { MeshReport, MeshStart, MeshNext, MeshSet, MeshSetZOffset }; /** * G29: Mesh-based Z probe, probes a grid and produces a @@ -2729,21 +2729,22 @@ inline void gcode_G28() { * S1 Start probing mesh points * S2 Probe the next mesh point * S3 Xn Yn Zn.nn Manually modify a single point + * S4 Zn.nn Set z offset. Positive away from bed, negative closer to bed. * * The S0 report the points as below * - * +----> X-axis + * +----> X-axis 1-n * | * | - * v Y-axis + * v Y-axis 1-n * */ inline void gcode_G29() { static int probe_point = -1; MeshLevelingState state = code_seen('S') ? (MeshLevelingState)code_value_short() : MeshReport; - if (state < 0 || state > 3) { - SERIAL_PROTOCOLLNPGM("S out of range (0-3)."); + if (state < 0 || state > 4) { + SERIAL_PROTOCOLLNPGM("S out of range (0-4)."); return; } @@ -2759,6 +2760,8 @@ inline void gcode_G28() { SERIAL_PROTOCOL(MESH_NUM_Y_POINTS); SERIAL_PROTOCOLPGM("\nZ search height: "); SERIAL_PROTOCOL(MESH_HOME_SEARCH_Z); + SERIAL_PROTOCOLPGM("\nZ offset: "); + SERIAL_PROTOCOL_F(mbl.z_offset, 5); SERIAL_PROTOCOLLNPGM("\nMeasured points:"); for (int y = 0; y < MESH_NUM_Y_POINTS; y++) { for (int x = 0; x < MESH_NUM_X_POINTS; x++) { @@ -2849,6 +2852,17 @@ inline void gcode_G28() { return; } mbl.z_values[iy][ix] = z; + break; + + case MeshSetZOffset: + if (code_seen('Z')) { + z = code_value(); + } + else { + SERIAL_PROTOCOLPGM("Z not entered.\n"); + return; + } + mbl.z_offset = z; } // switch(state) } diff --git a/Marlin/configuration_store.cpp b/Marlin/configuration_store.cpp index d9929e10a1..83bd8450bd 100644 --- a/Marlin/configuration_store.cpp +++ b/Marlin/configuration_store.cpp @@ -36,10 +36,10 @@ * */ -#define EEPROM_VERSION "V22" +#define EEPROM_VERSION "V23" /** - * V21 EEPROM Layout: + * V23 EEPROM Layout: * * 100 Version (char x4) * @@ -59,62 +59,65 @@ * * Mesh bed leveling: * 200 M420 S active (bool) - * 201 mesh_num_x (uint8 as set in firmware) - * 202 mesh_num_y (uint8 as set in firmware) - * 203 M421 XYZ z_values[][] (float x9, by default) - * 239 M851 zprobe_zoffset (float) + * 201 z_offset (float) (added in V23) + * 205 mesh_num_x (uint8 as set in firmware) + * 206 mesh_num_y (uint8 as set in firmware) + * 207 M421 XYZ z_values[][] (float x9, by default) + * + * AUTO BED LEVELING + * 243 M851 zprobe_zoffset (float) * * DELTA: - * 243 M666 XYZ endstop_adj (float x3) - * 255 M665 R delta_radius (float) - * 259 M665 L delta_diagonal_rod (float) - * 263 M665 S delta_segments_per_second (float) - * 267 M665 A delta_diagonal_rod_trim_tower_1 (float) - * 271 M665 B delta_diagonal_rod_trim_tower_2 (float) - * 275 M665 C delta_diagonal_rod_trim_tower_3 (float) + * 247 M666 XYZ endstop_adj (float x3) + * 259 M665 R delta_radius (float) + * 263 M665 L delta_diagonal_rod (float) + * 267 M665 S delta_segments_per_second (float) + * 271 M665 A delta_diagonal_rod_trim_tower_1 (float) + * 275 M665 B delta_diagonal_rod_trim_tower_2 (float) + * 279 M665 C delta_diagonal_rod_trim_tower_3 (float) * * Z_DUAL_ENDSTOPS: - * 279 M666 Z z_endstop_adj (float) + * 283 M666 Z z_endstop_adj (float) * * ULTIPANEL: - * 283 M145 S0 H plaPreheatHotendTemp (int) - * 285 M145 S0 B plaPreheatHPBTemp (int) - * 287 M145 S0 F plaPreheatFanSpeed (int) - * 289 M145 S1 H absPreheatHotendTemp (int) - * 291 M145 S1 B absPreheatHPBTemp (int) - * 293 M145 S1 F absPreheatFanSpeed (int) + * 287 M145 S0 H plaPreheatHotendTemp (int) + * 289 M145 S0 B plaPreheatHPBTemp (int) + * 291 M145 S0 F plaPreheatFanSpeed (int) + * 293 M145 S1 H absPreheatHotendTemp (int) + * 295 M145 S1 B absPreheatHPBTemp (int) + * 297 M145 S1 F absPreheatFanSpeed (int) * * PIDTEMP: - * 295 M301 E0 PIDC Kp[0], Ki[0], Kd[0], Kc[0] (float x4) - * 311 M301 E1 PIDC Kp[1], Ki[1], Kd[1], Kc[1] (float x4) - * 327 M301 E2 PIDC Kp[2], Ki[2], Kd[2], Kc[2] (float x4) - * 343 M301 E3 PIDC Kp[3], Ki[3], Kd[3], Kc[3] (float x4) - * 359 M301 L lpq_len (int) + * 299 M301 E0 PIDC Kp[0], Ki[0], Kd[0], Kc[0] (float x4) + * 315 M301 E1 PIDC Kp[1], Ki[1], Kd[1], Kc[1] (float x4) + * 331 M301 E2 PIDC Kp[2], Ki[2], Kd[2], Kc[2] (float x4) + * 347 M301 E3 PIDC Kp[3], Ki[3], Kd[3], Kc[3] (float x4) + * 363 M301 L lpq_len (int) * * PIDTEMPBED: - * 361 M304 PID bedKp, bedKi, bedKd (float x3) + * 365 M304 PID bedKp, bedKi, bedKd (float x3) * * DOGLCD: - * 373 M250 C lcd_contrast (int) + * 377 M250 C lcd_contrast (int) * * SCARA: - * 375 M365 XYZ axis_scaling (float x3) + * 379 M365 XYZ axis_scaling (float x3) * * FWRETRACT: - * 387 M209 S autoretract_enabled (bool) - * 388 M207 S retract_length (float) - * 392 M207 W retract_length_swap (float) - * 396 M207 F retract_feedrate (float) - * 400 M207 Z retract_zlift (float) - * 404 M208 S retract_recover_length (float) - * 408 M208 W retract_recover_length_swap (float) - * 412 M208 F retract_recover_feedrate (float) + * 391 M209 S autoretract_enabled (bool) + * 392 M207 S retract_length (float) + * 396 M207 W retract_length_swap (float) + * 400 M207 F retract_feedrate (float) + * 404 M207 Z retract_zlift (float) + * 408 M208 S retract_recover_length (float) + * 412 M208 W retract_recover_length_swap (float) + * 416 M208 F retract_recover_feedrate (float) * * Volumetric Extrusion: - * 416 M200 D volumetric_enabled (bool) - * 417 M200 T D filament_size (float x4) (T0..3) + * 420 M200 D volumetric_enabled (bool) + * 421 M200 T D filament_size (float x4) (T0..3) * - * 433 This Slot is Available! + * 437 This Slot is Available! * */ #include "Marlin.h" @@ -192,15 +195,17 @@ void Config_StoreSettings() { mesh_num_x = MESH_NUM_X_POINTS; mesh_num_y = MESH_NUM_Y_POINTS; EEPROM_WRITE_VAR(i, mbl.active); + EEPROM_WRITE_VAR(i, mbl.z_offset); EEPROM_WRITE_VAR(i, mesh_num_x); EEPROM_WRITE_VAR(i, mesh_num_y); EEPROM_WRITE_VAR(i, mbl.z_values); #else uint8_t dummy_uint8 = 0; + dummy = 0.0f; EEPROM_WRITE_VAR(i, dummy_uint8); + EEPROM_WRITE_VAR(i, dummy); EEPROM_WRITE_VAR(i, mesh_num_x); EEPROM_WRITE_VAR(i, mesh_num_y); - dummy = 0.0f; for (uint8_t q = 0; q < mesh_num_x * mesh_num_y; q++) EEPROM_WRITE_VAR(i, dummy); #endif // MESH_BED_LEVELING @@ -366,10 +371,12 @@ void Config_RetrieveSettings() { uint8_t dummy_uint8 = 0, mesh_num_x = 0, mesh_num_y = 0; EEPROM_READ_VAR(i, dummy_uint8); + EEPROM_READ_VAR(i, dummy); EEPROM_READ_VAR(i, mesh_num_x); EEPROM_READ_VAR(i, mesh_num_y); #if ENABLED(MESH_BED_LEVELING) mbl.active = dummy_uint8; + mbl.z_offset = dummy; if (mesh_num_x == MESH_NUM_X_POINTS && mesh_num_y == MESH_NUM_Y_POINTS) { EEPROM_READ_VAR(i, mbl.z_values); } else { diff --git a/Marlin/language_en.h b/Marlin/language_en.h index b4eb6d5cdf..5cb4f95c58 100644 --- a/Marlin/language_en.h +++ b/Marlin/language_en.h @@ -169,6 +169,9 @@ #ifndef MSG_SPEED #define MSG_SPEED "Speed" #endif +#ifndef MSG_BED_Z + #define MSG_BED_Z "Bed Z" +#endif #ifndef MSG_NOZZLE #define MSG_NOZZLE "Nozzle" #endif diff --git a/Marlin/mesh_bed_leveling.cpp b/Marlin/mesh_bed_leveling.cpp index 462c6c6866..d35ed3e4d9 100644 --- a/Marlin/mesh_bed_leveling.cpp +++ b/Marlin/mesh_bed_leveling.cpp @@ -30,6 +30,7 @@ void mesh_bed_leveling::reset() { active = 0; + z_offset = 0; for (int y = 0; y < MESH_NUM_Y_POINTS; y++) for (int x = 0; x < MESH_NUM_X_POINTS; x++) z_values[y][x] = 0; diff --git a/Marlin/mesh_bed_leveling.h b/Marlin/mesh_bed_leveling.h index d531ff5162..1df1c98995 100644 --- a/Marlin/mesh_bed_leveling.h +++ b/Marlin/mesh_bed_leveling.h @@ -30,6 +30,7 @@ class mesh_bed_leveling { public: uint8_t active; + float z_offset; float z_values[MESH_NUM_Y_POINTS][MESH_NUM_X_POINTS]; mesh_bed_leveling(); @@ -70,7 +71,7 @@ float z0 = calc_z0(y0, get_y(y_index), z1, get_y(y_index + 1), z2); - return z0; + return z0 + z_offset; } }; diff --git a/Marlin/ultralcd.cpp b/Marlin/ultralcd.cpp index 2dd247a8dd..38db6ed17f 100644 --- a/Marlin/ultralcd.cpp +++ b/Marlin/ultralcd.cpp @@ -599,6 +599,11 @@ static void lcd_tune_menu() { // MENU_ITEM_EDIT(int3, MSG_SPEED, &feedrate_multiplier, 10, 999); + // Manual bed leveling, Bed Z: + #if ENABLED(MANUAL_BED_LEVELING) + MENU_ITEM_EDIT(float43, MSG_BED_Z, &mbl.z_offset, -1, 1); + #endif + // // Nozzle: // Nozzle [1-4]: @@ -1333,6 +1338,10 @@ static void lcd_control_motion_menu() { #if ENABLED(AUTO_BED_LEVELING_FEATURE) MENU_ITEM_EDIT(float32, MSG_ZPROBE_ZOFFSET, &zprobe_zoffset, Z_PROBE_OFFSET_RANGE_MIN, Z_PROBE_OFFSET_RANGE_MAX); #endif + // Manual bed leveling, Bed Z: + #if ENABLED(MANUAL_BED_LEVELING) + MENU_ITEM_EDIT(float43, MSG_BED_Z, &mbl.z_offset, -1, 1); + #endif MENU_ITEM_EDIT(float5, MSG_ACC, &acceleration, 10, 99000); MENU_ITEM_EDIT(float3, MSG_VXY_JERK, &max_xy_jerk, 1, 990); #if ENABLED(DELTA)