From c762b7c91b03415d37bbb96c5b2b6b8308ee3ba8 Mon Sep 17 00:00:00 2001 From: Jason Smith Date: Sun, 11 Oct 2020 17:06:57 -0700 Subject: [PATCH] Fix various errors, warnings in example config builds (#19686) Co-authored-by: Scott Lahteine --- Marlin/src/gcode/bedlevel/G26.cpp | 8 +- Marlin/src/gcode/motion/M290.cpp | 2 +- Marlin/src/lcd/dogm/dogm_Statusscreen.h | 2 +- .../lcd/extui/lib/mks_ui/draw_printing.cpp | 18 +- .../lib/mks_ui/tft_lvgl_configuration.cpp | 52 ++--- .../src/lcd/extui/lib/mks_ui/wifi_upload.cpp | 186 ++++++++---------- Marlin/src/lcd/menu/menu_delta_calibrate.cpp | 2 +- Marlin/src/lcd/menu/menu_ubl.cpp | 3 +- Marlin/src/module/thermistor/thermistor_666.h | 3 +- Marlin/src/pins/sensitive_pins.h | 29 ++- Marlin/src/pins/stm32f1/pins_MKS_ROBIN_PRO.h | 1 + 11 files changed, 141 insertions(+), 165 deletions(-) diff --git a/Marlin/src/gcode/bedlevel/G26.cpp b/Marlin/src/gcode/bedlevel/G26.cpp index c66d4a7d49..661128b04e 100644 --- a/Marlin/src/gcode/bedlevel/G26.cpp +++ b/Marlin/src/gcode/bedlevel/G26.cpp @@ -511,11 +511,9 @@ void GcodeSuite::G26() { g26_keep_heaters_on = parser.boolval('K'); // Accept 'I' if temperature presets are defined - const uint8_t preset_index = (0 - #if PREHEAT_COUNT - + (parser.seenval('I') ? _MIN(parser.value_byte(), PREHEAT_COUNT - 1) + 1 : 0) - #endif - ); + #if PREHEAT_COUNT + const uint8_t preset_index = parser.seenval('I') ? _MIN(parser.value_byte(), PREHEAT_COUNT - 1) + 1 : 0; + #endif #if HAS_HEATED_BED diff --git a/Marlin/src/gcode/motion/M290.cpp b/Marlin/src/gcode/motion/M290.cpp index 7158525ed9..18cc161fce 100644 --- a/Marlin/src/gcode/motion/M290.cpp +++ b/Marlin/src/gcode/motion/M290.cpp @@ -127,7 +127,7 @@ void GcodeSuite::M290() { #else PSTR("Babystep Z") #endif - , babystep.axis_total[BS_AXIS_IND(Z_AXIS)] + , babystep.axis_total[BS_TOTAL_IND(Z_AXIS)] ); } #endif diff --git a/Marlin/src/lcd/dogm/dogm_Statusscreen.h b/Marlin/src/lcd/dogm/dogm_Statusscreen.h index 70802f905e..c6ad566cff 100644 --- a/Marlin/src/lcd/dogm/dogm_Statusscreen.h +++ b/Marlin/src/lcd/dogm/dogm_Statusscreen.h @@ -1341,7 +1341,7 @@ #undef STATUS_LOGO_WIDTH #endif - #if (HAS_MULTI_HOTEND && STATUS_LOGO_WIDTH && BED_OR_CHAMBER_OR_FAN) || (HOTENDS >= 3 && !BED_OR_CHAMBER_OR_FAN) + #if !defined(STATUS_HEATERS_X) && ((HAS_MULTI_HOTEND && STATUS_LOGO_WIDTH && BED_OR_CHAMBER_OR_FAN) || (HOTENDS >= 3 && !BED_OR_CHAMBER_OR_FAN)) #define _STATUS_HEATERS_X(H,S,N) ((LCD_PIXEL_WIDTH - (H * (S + N)) - (_EXTRA_WIDTH) + (STATUS_LOGO_WIDTH)) / 2) #if STATUS_HOTEND1_WIDTH #if HOTENDS > 2 diff --git a/Marlin/src/lcd/extui/lib/mks_ui/draw_printing.cpp b/Marlin/src/lcd/extui/lib/mks_ui/draw_printing.cpp index a81b5b851b..c6369db413 100644 --- a/Marlin/src/lcd/extui/lib/mks_ui/draw_printing.cpp +++ b/Marlin/src/lcd/extui/lib/mks_ui/draw_printing.cpp @@ -46,7 +46,8 @@ extern lv_group_t * g; static lv_obj_t * scr; -static lv_obj_t *labelExt1, * labelExt2, * labelFan, * labelZpos, * labelTime; +static lv_obj_t *labelExt1, * labelFan, * labelZpos, * labelTime; +TERN_(HAS_MULTI_EXTRUDER, static lv_obj_t *labelExt2;) static lv_obj_t *labelPause, * labelStop, * labelOperat; static lv_obj_t * bar1, *bar1ValueText; static lv_obj_t * buttonPause, *buttonOperat, *buttonStop; @@ -137,9 +138,6 @@ static void event_handler(lv_obj_t * obj, lv_event_t event) { } void lv_draw_printing(void) { - lv_obj_t *buttonExt1, *buttonExt2, *buttonFanstate, *buttonZpos, *buttonTime; - TERN_(HAS_HEATED_BED, lv_obj_t * buttonBedstate); - disp_state_stack._disp_index = 0; ZERO(disp_state_stack._disp_state); disp_state_stack._disp_state[disp_state_stack._disp_index] = PRINTING_UI; @@ -162,16 +160,16 @@ void lv_draw_printing(void) { lv_refr_now(lv_refr_get_disp_refreshing()); // Create image buttons - buttonExt1 = lv_img_create(scr, NULL); + lv_obj_t *buttonExt1 = lv_img_create(scr, NULL); #if HAS_MULTI_EXTRUDER - buttonExt2 = lv_img_create(scr, NULL); + lv_obj_t *buttonExt2 = lv_img_create(scr, NULL); #endif #if HAS_HEATED_BED - buttonBedstate = lv_img_create(scr, NULL); + lv_obj_t *buttonBedstate = lv_img_create(scr, NULL); #endif - buttonFanstate = lv_img_create(scr, NULL); - buttonTime = lv_img_create(scr, NULL); - buttonZpos = lv_img_create(scr, NULL); + lv_obj_t *buttonFanstate = lv_img_create(scr, NULL); + lv_obj_t *buttonTime = lv_img_create(scr, NULL); + lv_obj_t *buttonZpos = lv_img_create(scr, NULL); buttonPause = lv_imgbtn_create(scr, NULL); buttonStop = lv_imgbtn_create(scr, NULL); buttonOperat = lv_imgbtn_create(scr, NULL); diff --git a/Marlin/src/lcd/extui/lib/mks_ui/tft_lvgl_configuration.cpp b/Marlin/src/lcd/extui/lib/mks_ui/tft_lvgl_configuration.cpp index 49b44799a6..3f8110feb4 100644 --- a/Marlin/src/lcd/extui/lib/mks_ui/tft_lvgl_configuration.cpp +++ b/Marlin/src/lcd/extui/lib/mks_ui/tft_lvgl_configuration.cpp @@ -799,39 +799,39 @@ void lv_encoder_pin_init() { //static const int8_t encoderDirection = 1; //static int16_t enc_Direction; void lv_update_encoder() { - static uint8_t buttons; static uint32_t encoder_time1; uint32_t tmpTime, diffTime = 0; tmpTime = millis(); diffTime = getTickDiff(tmpTime, encoder_time1); if (diffTime > 50) { - #if ANY_BUTTON(EN1, EN2, ENC, BACK) - - uint8_t newbutton = 0; - - #if BUTTON_EXISTS(EN1) - if (BUTTON_PRESSED(EN1)) newbutton |= EN_A; - #endif - #if BUTTON_EXISTS(EN2) - if (BUTTON_PRESSED(EN2)) newbutton |= EN_B; - #endif - #if BUTTON_EXISTS(ENC) - if (BUTTON_PRESSED(ENC)) newbutton |= EN_C; - #endif - #if BUTTON_EXISTS(BACK) - if (BUTTON_PRESSED(BACK)) newbutton |= EN_D; - #endif - - #else - - constexpr uint8_t newbutton = 0; - - #endif - - buttons = newbutton; - #if HAS_ENCODER_WHEEL + + #if ANY_BUTTON(EN1, EN2, ENC, BACK) + + uint8_t newbutton = 0; + + #if BUTTON_EXISTS(EN1) + if (BUTTON_PRESSED(EN1)) newbutton |= EN_A; + #endif + #if BUTTON_EXISTS(EN2) + if (BUTTON_PRESSED(EN2)) newbutton |= EN_B; + #endif + #if BUTTON_EXISTS(ENC) + if (BUTTON_PRESSED(ENC)) newbutton |= EN_C; + #endif + #if BUTTON_EXISTS(BACK) + if (BUTTON_PRESSED(BACK)) newbutton |= EN_D; + #endif + + #else + + constexpr uint8_t newbutton = 0; + + #endif + + + static uint8_t buttons = newbutton; static uint8_t lastEncoderBits; #define encrot0 0 diff --git a/Marlin/src/lcd/extui/lib/mks_ui/wifi_upload.cpp b/Marlin/src/lcd/extui/lib/mks_ui/wifi_upload.cpp index 77bcb767b7..087a3b2110 100644 --- a/Marlin/src/lcd/extui/lib/mks_ui/wifi_upload.cpp +++ b/Marlin/src/lcd/extui/lib/mks_ui/wifi_upload.cpp @@ -110,24 +110,17 @@ const char *resultMessages[] = { // 230400b always manages to connect. static const uint32_t uploadBaudRates[] = { 460800, 230400, 115200, 74880 }; - - signed char IsReady() { return esp_upload.state == upload_idle; } - - - - void uploadPort_write(const uint8_t *buf, size_t len) { #if 0 int i; - for(i = 0; i < len; i++) { - while (USART_GetFlagStatus(USART1, USART_FLAG_TC) == RESET); - - USART_SendData(USART1, *(buf + i)); + for (i = 0; i < len; i++) { + while (USART_GetFlagStatus(USART1, USART_FLAG_TC) == RESET) { /* nada */ } + USART_SendData(USART1, *(buf + i)); } #endif } @@ -138,28 +131,22 @@ char uploadPort_read() { return retChar; else return 0; - } int uploadPort_available() { return usartFifoAvailable(&WifiRxFifo); } - void uploadPort_begin() { esp_port_begin(1); } void uploadPort_close() { - //WIFI_COM.end(); //WIFI_COM.begin(115200, true); - esp_port_begin(0); - } - void flushInput() { while (uploadPort_available() != 0) { (void)uploadPort_read(); @@ -304,7 +291,6 @@ EspUploadResult readPacket(uint8_t op, uint32_t *valp, size_t *bodyLen, uint32_t *bodyLen = 0; - while (state != done) { uint8_t c; EspUploadResult stat; @@ -322,73 +308,73 @@ EspUploadResult readPacket(uint8_t op, uint32_t *valp, size_t *bodyLen, uint32_t } // sufficient bytes have been received for the current state, process them - switch(state) { - case begin: // expecting frame start - c = uploadPort_read(); - if (c != (uint8_t)0xC0) { - break; - } - state = header; - needBytes = 2; - - break; - case end: // expecting frame end - c = uploadPort_read(); - if (c != (uint8_t)0xC0) { - return slipFrame; - } - state = done; - - break; - - case header: // reading an 8-byte header - case body: // reading the response body - { - int rslt; - // retrieve a byte with SLIP decoding - rslt = ReadByte(&c, 1); - if (rslt != 1 && rslt != 2) { - // some error occurred - stat = (rslt == 0 || rslt == -2) ? slipData : slipFrame; - return stat; + switch (state) { + case begin: // expecting frame start + c = uploadPort_read(); + if (c != (uint8_t)0xC0) { + break; } - else if (state == header) { - //store the header byte - hdr[hdrIdx++] = c; - if (hdrIdx >= headerLength) { - // get the body length, prepare a buffer for it - *bodyLen = (uint16_t)getData(2, hdr, 2); + state = header; + needBytes = 2; - // extract the value, if requested - if (valp != 0) { - *valp = getData(4, hdr, 4); - } + break; + case end: // expecting frame end + c = uploadPort_read(); + if (c != (uint8_t)0xC0) { + return slipFrame; + } + state = done; - if (*bodyLen != 0) { - state = body; + break; + + case header: // reading an 8-byte header + case body: // reading the response body + { + int rslt; + // retrieve a byte with SLIP decoding + rslt = ReadByte(&c, 1); + if (rslt != 1 && rslt != 2) { + // some error occurred + stat = (rslt == 0 || rslt == -2) ? slipData : slipFrame; + return stat; + } + else if (state == header) { + //store the header byte + hdr[hdrIdx++] = c; + if (hdrIdx >= headerLength) { + // get the body length, prepare a buffer for it + *bodyLen = (uint16_t)getData(2, hdr, 2); + + // extract the value, if requested + if (valp != 0) { + *valp = getData(4, hdr, 4); + } + + if (*bodyLen != 0) { + state = body; + } + else { + needBytes = 1; + state = end; + } } - else { + } + else { + // Store the response body byte, check for completion + if (bodyIdx < ARRAY_SIZE(respBuf)) { + respBuf[bodyIdx] = c; + } + ++bodyIdx; + if (bodyIdx >= *bodyLen) { needBytes = 1; state = end; } } } - else { - // Store the response body byte, check for completion - if (bodyIdx < ARRAY_SIZE(respBuf)) { - respBuf[bodyIdx] = c; - } - ++bodyIdx; - if (bodyIdx >= *bodyLen) { - needBytes = 1; - state = end; - } - } - } - break; + break; - default: // this shouldn't happen - return slipState; + default: // this shouldn't happen + return slipState; } } @@ -397,7 +383,7 @@ EspUploadResult readPacket(uint8_t op, uint32_t *valp, size_t *bodyLen, uint32_t opRet = (uint8_t)getData(1, hdr, 1); // Sync packets often provoke a response with a zero opcode instead of ESP_SYNC if (resp != 0x01 || opRet != op) { -//debug//printf("resp %02x %02x\n", resp, opRet); + //printf("resp %02x %02x\n", resp, opRet); //debug return respHeader; } @@ -432,20 +418,19 @@ void _writePacket(const uint8_t *data, size_t len) { // 0xC0 and 0xDB replaced by the two-byte sequences {0xDB, 0xDC} and {0xDB, 0xDD} respectively. void writePacket(const uint8_t *hdr, size_t hdrLen, const uint8_t *data, size_t dataLen) { - - WriteByteRaw(0xC0); // send the packet start character + WriteByteRaw(0xC0); // send the packet start character _writePacket(hdr, hdrLen); // send the header - _writePacket(data, dataLen); // send the data block - WriteByteRaw(0xC0); // send the packet end character + _writePacket(data, dataLen); // send the data block + WriteByteRaw(0xC0); // send the packet end character } // Send a packet to the serial port while performing SLIP framing. The packet data comprises a header and an optional data block. // This is like writePacket except that it does a fast block write for both the header and the main data with no SLIP encoding. Used to send sync commands. void writePacketRaw(const uint8_t *hdr, size_t hdrLen, const uint8_t *data, size_t dataLen) { - WriteByteRaw(0xC0); // send the packet start character - _writePacketRaw(hdr, hdrLen); // send the header + WriteByteRaw(0xC0); // send the packet start character + _writePacketRaw(hdr, hdrLen); // send the header _writePacketRaw(data, dataLen); // send the data block in raw mode - WriteByteRaw(0xC0); // send the packet end character + WriteByteRaw(0xC0); // send the packet end character } // Send a command to the attached device together with the supplied data, if any. @@ -460,12 +445,10 @@ void sendCommand(uint8_t op, uint32_t checkVal, const uint8_t *data, size_t data // send the packet //flushInput(); - if (op == ESP_SYNC) { + if (op == ESP_SYNC) writePacketRaw(hdr, sizeof(hdr), data, dataLen); - } - else { + else writePacket(hdr, sizeof(hdr), data, dataLen); - } } // Send a command to the attached device together with the supplied data, if any, and get the response @@ -476,9 +459,8 @@ EspUploadResult doCommand(uint8_t op, const uint8_t *data, size_t dataLen, uint3 sendCommand(op, checkVal, data, dataLen); stat = readPacket(op, valp, &bodyLen, msTimeout); - if (stat == success && bodyLen != 2) { + if (stat == success && bodyLen != 2) stat = badReply; - } return stat; } @@ -611,6 +593,8 @@ EspUploadResult flashWriteBlock(uint16_t flashParmVal, uint16_t flashParmMask) { //printf("Upload %d\%\n", ftell(&esp_upload.uploadFile) * 100 / esp_upload.fileSize); return stat; + #else + return success; #endif } @@ -625,15 +609,14 @@ void upload_spin() { esp_upload.uploadResult = connected; esp_upload.state = done; } - else{ + else { // Reset the serial port at the new baud rate. Also reset the ESP8266. - // const uint32_t baud = uploadBaudRates[esp_upload.connectAttemptNumber/esp_upload.retriesPerBaudRate]; + // const uint32_t baud = uploadBaudRates[esp_upload.connectAttemptNumber/esp_upload.retriesPerBaudRate]; if (esp_upload.connectAttemptNumber % esp_upload.retriesPerBaudRate == 0) { } - // uploadPort.begin(baud); - // uploadPort_close(); - + //uploadPort.begin(baud); + //uploadPort_close(); uploadPort_begin(); @@ -654,7 +637,7 @@ void upload_spin() { esp_upload.lastAttemptTime = getWifiTick(); if (res == success) { // Successful connection -// //MessageF(" success on attempt %d\n", (connectAttemptNumber % retriesPerBaudRate) + 1); + //MessageF(" success on attempt %d\n", (connectAttemptNumber % retriesPerBaudRate) + 1); //printf("connect success\n"); esp_upload.state = erasing; } @@ -675,14 +658,13 @@ void upload_spin() { const uint32_t sectorSize = 4096; const uint32_t numSectors = (esp_upload.fileSize + sectorSize - 1)/sectorSize; const uint32_t startSector = esp_upload.uploadAddress/sectorSize; - uint32_t headSectors = sectorsPerBlock - (startSector % sectorsPerBlock); - if (numSectors < headSectors) { - headSectors = numSectors; - } - eraseSize = (numSectors < 2 * headSectors) - ? (numSectors + 1) / 2 * sectorSize - : (numSectors - headSectors) * sectorSize; + uint32_t headSectors = sectorsPerBlock - (startSector % sectorsPerBlock); + NOMORE(headSectors, numSectors); + + eraseSize = (numSectors < 2 * headSectors) + ? (numSectors + 1) / 2 * sectorSize + : (numSectors - headSectors) * sectorSize; //MessageF("Erasing %u bytes...\n", fileSize); esp_upload.uploadResult = flashBegin(esp_upload.uploadAddress, eraseSize); @@ -755,7 +737,7 @@ void SendUpdateFile(const char *file, uint32_t address) { if (res != FR_OK) return; - esp_upload.fileSize = f_size(&esp_upload.uploadFile); + esp_upload.fileSize = f_size(&esp_upload.uploadFile); if (esp_upload.fileSize == 0) { f_close(&esp_upload.uploadFile); return; diff --git a/Marlin/src/lcd/menu/menu_delta_calibrate.cpp b/Marlin/src/lcd/menu/menu_delta_calibrate.cpp index 705ec41611..4efcb7c8ed 100644 --- a/Marlin/src/lcd/menu/menu_delta_calibrate.cpp +++ b/Marlin/src/lcd/menu/menu_delta_calibrate.cpp @@ -118,7 +118,7 @@ void lcd_delta_settings() { } void menu_delta_calibrate() { - const bool all_homed = all_axes_homed(); + TERN_(DELTA_CALIBRATION_MENU, const bool all_homed = all_axes_homed()); // Acquire ahead of loop START_MENU(); BACK_ITEM(MSG_MAIN); diff --git a/Marlin/src/lcd/menu/menu_ubl.cpp b/Marlin/src/lcd/menu/menu_ubl.cpp index 2cd300958f..f0f5c21bec 100644 --- a/Marlin/src/lcd/menu/menu_ubl.cpp +++ b/Marlin/src/lcd/menu/menu_ubl.cpp @@ -188,11 +188,10 @@ void _lcd_ubl_edit_mesh() { */ void _lcd_ubl_validate_custom_mesh() { char ubl_lcd_gcode[24]; - const int16_t temp = TERN(HAS_HEATED_BED, custom_bed_temp, 0); sprintf_P(ubl_lcd_gcode, PSTR("G28\nG26 C P H%" PRIi16 TERN_(HAS_HEATED_BED, " B%" PRIi16)) , custom_hotend_temp #if HAS_HEATED_BED - , temp + , custom_bed_temp #endif ); queue.inject(ubl_lcd_gcode); diff --git a/Marlin/src/module/thermistor/thermistor_666.h b/Marlin/src/module/thermistor/thermistor_666.h index 86493988e0..490dbd5f3e 100644 --- a/Marlin/src/module/thermistor/thermistor_666.h +++ b/Marlin/src/module/thermistor/thermistor_666.h @@ -33,8 +33,7 @@ * B: 0.00031362 * C: -2.03978e-07 */ -#define NUMTEMPS 61 -const short temptable_666[NUMTEMPS][2] PROGMEM = { +const temp_entry_t temptable_666[] PROGMEM = { { OV( 1), 794 }, { OV( 18), 288 }, { OV( 35), 234 }, diff --git a/Marlin/src/pins/sensitive_pins.h b/Marlin/src/pins/sensitive_pins.h index 169f74b437..d7eb187245 100644 --- a/Marlin/src/pins/sensitive_pins.h +++ b/Marlin/src/pins/sensitive_pins.h @@ -608,12 +608,6 @@ #define _Z_PROBE #endif -#if TEMP_SENSOR_BED && PIN_EXISTS(HEATER_BED) - #define _HEATER_BED HEATER_BED_PIN, -#else - #define _HEATER_BED -#endif - #if PIN_EXISTS(FAN) #define _FAN0 FAN_PIN, #else @@ -660,21 +654,26 @@ #define _FANC #endif -#if PIN_EXISTS(HEATER_BED) && PIN_EXISTS(TEMP_BED) +#if TEMP_SENSOR_BED && PINS_EXIST(TEMP_BED, HEATER_BED) #define _BED_PINS HEATER_BED_PIN, analogInputToDigitalPin(TEMP_BED_PIN), #else #define _BED_PINS #endif -#if PIN_EXISTS(TEMP_CHAMBER) - #define __CHAMBER_PINS CHAMBER_AUTO_FAN_PIN, analogInputToDigitalPin(TEMP_CHAMBER_PIN), +#if TEMP_SENSOR_CHAMBER && PIN_EXISTS(TEMP_CHAMBER) + #define _CHAMBER_TEMP analogInputToDigitalPin(TEMP_CHAMBER_PIN), #else - #define __CHAMBER_PINS + #define _CHAMBER_TEMP #endif -#if PIN_EXISTS(HEATER_CHAMBER) - #define _CHAMBER_PINS __CHAMBER_PINS HEATER_CHAMBER_PIN, +#if TEMP_SENSOR_CHAMBER && PINS_EXIST(TEMP_CHAMBER, HEATER_CHAMBER) + #define _CHAMBER_HEATER HEATER_CHAMBER_PIN, #else - #define _CHAMBER_PINS + #define _CHAMBER_HEATER +#endif +#if TEMP_SENSOR_CHAMBER && PINS_EXIST(TEMP_CHAMBER, CHAMBER_AUTO_FAN) + #define _CHAMBER_FAN CHAMBER_AUTO_FAN_PIN, +#else + #define _CHAMBER_FAN #endif #ifndef HAL_SENSITIVE_PINS @@ -685,6 +684,6 @@ _X_PINS _Y_PINS _Z_PINS _X2_PINS _Y2_PINS _Z2_PINS _Z3_PINS _Z4_PINS _Z_PROBE \ _E0_PINS _E1_PINS _E2_PINS _E3_PINS _E4_PINS _E5_PINS _E6_PINS _E7_PINS \ _H0_PINS _H1_PINS _H2_PINS _H3_PINS _H4_PINS _H5_PINS _H6_PINS _H7_PINS \ - _PS_ON _HEATER_BED _FAN0 _FAN1 _FAN2 _FAN3 _FAN4 _FAN5 _FAN6 _FAN7 _FANC \ - _BED_PINS _CHAMBER_PINS HAL_SENSITIVE_PINS \ + _PS_ON _FAN0 _FAN1 _FAN2 _FAN3 _FAN4 _FAN5 _FAN6 _FAN7 _FANC \ + _BED_PINS _CHAMBER_TEMP _CHAMBER_HEATER _CHAMBER_FAN HAL_SENSITIVE_PINS \ } diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_PRO.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_PRO.h index 12c40b31b3..32203f52ea 100644 --- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_PRO.h +++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_PRO.h @@ -200,6 +200,7 @@ #elif SD_CONNECTION_IS(ONBOARD) #define SDIO_SUPPORT #define SD_DETECT_PIN PD12 + #define ONBOARD_SD_CS_PIN PC11 #elif SD_CONNECTION_IS(CUSTOM_CABLE) #error "No custom SD drive cable defined for this board." #endif