diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index 6cac225fce..007b8fc5df 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -363,6 +363,7 @@ * 331 : (3.3V scaled thermistor 1 table for MEGA) * 332 : (3.3V scaled thermistor 1 table for DUE) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) + * 202 : 200k thermistor - Copymaster 3D * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) diff --git a/Marlin/Makefile b/Marlin/Makefile index fcd763881e..0a9b3a45d7 100644 --- a/Marlin/Makefile +++ b/Marlin/Makefile @@ -267,6 +267,8 @@ else ifeq ($(HARDWARE_MOTHERBOARD),1147) else ifeq ($(HARDWARE_MOTHERBOARD),1148) # MKS GEN L V2 else ifeq ($(HARDWARE_MOTHERBOARD),1149) +# Copymaster 3D +else ifeq ($(HARDWARE_MOTHERBOARD),1150) # # RAMBo and derivatives diff --git a/Marlin/src/core/boards.h b/Marlin/src/core/boards.h index 09b0eada1a..86107f7d86 100644 --- a/Marlin/src/core/boards.h +++ b/Marlin/src/core/boards.h @@ -103,6 +103,7 @@ #define BOARD_HJC2560C_REV2 1147 // ADIMLab Gantry v2 #define BOARD_TANGO 1148 // BIQU Tango V1 #define BOARD_MKS_GEN_L_V2 1149 // MKS GEN L V2 +#define BOARD_COPYMASTER_3D 1150 // Copymaster 3D // // RAMBo and derivatives diff --git a/Marlin/src/module/thermistor/thermistor_202.h b/Marlin/src/module/thermistor/thermistor_202.h new file mode 100644 index 0000000000..9da3d45f45 --- /dev/null +++ b/Marlin/src/module/thermistor/thermistor_202.h @@ -0,0 +1,69 @@ +// +// Unknown 200K thermistor on a Copymaster 3D hotend +// Temptable sent from dealer technologyoutlet.co.uk +// + +const short temptable_202[][2] PROGMEM = { + { OV( 1), 864 }, + { OV( 35), 300 }, + { OV( 38), 295 }, + { OV( 41), 290 }, + { OV( 44), 285 }, + { OV( 47), 280 }, + { OV( 51), 275 }, + { OV( 55), 270 }, + { OV( 60), 265 }, + { OV( 65), 260 }, + { OV( 70), 255 }, + { OV( 76), 250 }, + { OV( 83), 245 }, + { OV( 90), 240 }, + { OV( 98), 235 }, + { OV( 107), 230 }, + { OV( 116), 225 }, + { OV( 127), 220 }, + { OV( 138), 215 }, + { OV( 151), 210 }, + { OV( 164), 205 }, + { OV( 179), 200 }, + { OV( 195), 195 }, + { OV( 213), 190 }, + { OV( 232), 185 }, + { OV( 253), 180 }, + { OV( 275), 175 }, + { OV( 299), 170 }, + { OV( 325), 165 }, + { OV( 352), 160 }, + { OV( 381), 155 }, + { OV( 411), 150 }, + { OV( 443), 145 }, + { OV( 476), 140 }, + { OV( 511), 135 }, + { OV( 546), 130 }, + { OV( 581), 125 }, + { OV( 617), 120 }, + { OV( 652), 115 }, + { OV( 687), 110 }, + { OV( 720), 105 }, + { OV( 753), 100 }, + { OV( 783), 95 }, + { OV( 812), 90 }, + { OV( 839), 85 }, + { OV( 864), 80 }, + { OV( 886), 75 }, + { OV( 906), 70 }, + { OV( 924), 65 }, + { OV( 940), 60 }, + { OV( 954), 55 }, + { OV( 966), 50 }, + { OV( 976), 45 }, + { OV( 985), 40 }, + { OV( 992), 35 }, + { OV( 998), 30 }, + { OV(1003), 25 }, + { OV(1007), 20 }, + { OV(1011), 15 }, + { OV(1014), 10 }, + { OV(1016), 5 }, + { OV(1018), 0 } +}; diff --git a/Marlin/src/module/thermistor/thermistors.h b/Marlin/src/module/thermistor/thermistors.h index 2a1500eebe..8ac9f11a55 100644 --- a/Marlin/src/module/thermistor/thermistors.h +++ b/Marlin/src/module/thermistor/thermistors.h @@ -151,6 +151,9 @@ #if ANY_THERMISTOR_IS(201) // Pt100 with LMV324 Overlord #include "thermistor_201.h" #endif +#if ANY_THERMISTOR_IS(202) // 200K thermistor in Copymaker3D hotend + #include "thermistor_202.h" +#endif #if ANY_THERMISTOR_IS(331) // Like table 1, but with 3V3 as input voltage for MEGA #include "thermistor_331.h" #endif diff --git a/Marlin/src/pins/pins.h b/Marlin/src/pins/pins.h index 64b9e85ba8..27d9545c3f 100644 --- a/Marlin/src/pins/pins.h +++ b/Marlin/src/pins/pins.h @@ -188,6 +188,8 @@ #include "ramps/pins_TANGO.h" // ATmega2560 env:mega2560 #elif MB(MKS_GEN_L_V2) #include "ramps/pins_MKS_GEN_L_V2.h" // ATmega2560 env:mega2560 +#elif MB(COPYMASTER_3D) + #include "ramps/pins_COPYMASTER_3D.h" // ATmega2560 env:mega2560 // // RAMBo and derivatives diff --git a/Marlin/src/pins/ramps/pins_COPYMASTER_3D.h b/Marlin/src/pins/ramps/pins_COPYMASTER_3D.h new file mode 100644 index 0000000000..7ee66b1194 --- /dev/null +++ b/Marlin/src/pins/ramps/pins_COPYMASTER_3D.h @@ -0,0 +1,33 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +#define BOARD_INFO_NAME "Copymaster 3D RAMPS" + +#define Z_STEP_PIN 47 +#define FIL_RUNOUT_PIN 15 +#define SD_DETECT_PIN 66 + +// +// Import RAMPS 1.4 pins +// +#include "pins_RAMPS.h" diff --git a/Marlin/src/pins/ramps/pins_RAMPS.h b/Marlin/src/pins/ramps/pins_RAMPS.h index 06b5eeafaf..272ff5636b 100644 --- a/Marlin/src/pins/ramps/pins_RAMPS.h +++ b/Marlin/src/pins/ramps/pins_RAMPS.h @@ -133,7 +133,9 @@ #define Y_CS_PIN 49 #endif -#define Z_STEP_PIN 46 +#ifndef Z_STEP_PIN + #define Z_STEP_PIN 46 +#endif #define Z_DIR_PIN 48 #define Z_ENABLE_PIN 62 #ifndef Z_CS_PIN