Merge pull request #8863 from thinkyhead/bf2_restore_position_float

[2.0.x] Restore position_float to LIN_ADVANCE
This commit is contained in:
Scott Lahteine 2017-12-21 17:12:28 -06:00 committed by GitHub
commit ca145643bd
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
3 changed files with 128 additions and 22 deletions

View File

@ -491,6 +491,10 @@ static_assert(X_MAX_LENGTH >= X_BED_SIZE && Y_MAX_LENGTH >= Y_BED_SIZE,
#endif #endif
#endif #endif
#if ENABLED(LIN_ADVANCE) && !IS_CARTESIAN
#error "Sorry! LIN_ADVANCE is only compatible with Cartesian."
#endif
/** /**
* Parking Extruder requirements * Parking Extruder requirements
*/ */

View File

@ -182,7 +182,10 @@ float Planner::previous_speed[NUM_AXIS],
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
float Planner::extruder_advance_k, // Initialized by settings.load() float Planner::extruder_advance_k, // Initialized by settings.load()
Planner::advance_ed_ratio; // Initialized by settings.load() Planner::advance_ed_ratio, // Initialized by settings.load()
Planner::position_float[XYZE], // Needed for accurate maths. Steps cannot be used!
Planner::lin_dist_xy,
Planner::lin_dist_e;
#endif #endif
#if ENABLED(ULTRA_LCD) #if ENABLED(ULTRA_LCD)
@ -198,6 +201,9 @@ Planner::Planner() { init(); }
void Planner::init() { void Planner::init() {
block_buffer_head = block_buffer_tail = 0; block_buffer_head = block_buffer_tail = 0;
ZERO(position); ZERO(position);
#if ENABLED(LIN_ADVANCE)
ZERO(position_float);
#endif
ZERO(previous_speed); ZERO(previous_speed);
previous_nominal_speed = 0.0; previous_nominal_speed = 0.0;
#if ABL_PLANAR #if ABL_PLANAR
@ -742,7 +748,9 @@ void Planner::_buffer_steps(const int32_t (&target)[XYZE], float fr_mm_s, const
SERIAL_ECHOLNPGM(" steps)"); SERIAL_ECHOLNPGM(" steps)");
//*/ //*/
#if ENABLED(PREVENT_COLD_EXTRUSION) || ENABLED(PREVENT_LENGTHY_EXTRUDE) // If LIN_ADVANCE is disabled then do E move prevention with integers
// Otherwise it's done in _buffer_segment.
#if DISABLED(LIN_ADVANCE) && (ENABLED(PREVENT_COLD_EXTRUSION) || ENABLED(PREVENT_LENGTHY_EXTRUDE))
if (de) { if (de) {
#if ENABLED(PREVENT_COLD_EXTRUSION) #if ENABLED(PREVENT_COLD_EXTRUSION)
if (thermalManager.tooColdToExtrude(extruder)) { if (thermalManager.tooColdToExtrude(extruder)) {
@ -761,7 +769,7 @@ void Planner::_buffer_steps(const int32_t (&target)[XYZE], float fr_mm_s, const
} }
#endif // PREVENT_LENGTHY_EXTRUDE #endif // PREVENT_LENGTHY_EXTRUDE
} }
#endif // PREVENT_COLD_EXTRUSION || PREVENT_LENGTHY_EXTRUDE #endif // !LIN_ADVANCE && (PREVENT_COLD_EXTRUSION || PREVENT_LENGTHY_EXTRUDE)
// Compute direction bit-mask for this block // Compute direction bit-mask for this block
uint8_t dm = 0; uint8_t dm = 0;
@ -1102,14 +1110,10 @@ void Planner::_buffer_steps(const int32_t (&target)[XYZE], float fr_mm_s, const
} }
#endif #endif
// Calculate and limit speed in mm/sec for each axis, calculate minimum acceleration ratio // Calculate and limit speed in mm/sec for each axis
float current_speed[NUM_AXIS], speed_factor = 1.0; // factor <1 decreases speed float current_speed[NUM_AXIS], speed_factor = 1.0; // factor <1 decreases speed
float max_stepper_speed = 0, min_axis_accel_ratio = 1; // ratio < 1 means acceleration ramp needed
LOOP_XYZE(i) { LOOP_XYZE(i) {
const float cs = FABS((current_speed[i] = delta_mm[i] * inverse_secs)); const float cs = FABS((current_speed[i] = delta_mm[i] * inverse_secs));
if (cs > max_jerk[i])
NOMORE(min_axis_accel_ratio, max_jerk[i] / cs);
NOLESS(max_stepper_speed, cs);
#if ENABLED(DISTINCT_E_FACTORS) #if ENABLED(DISTINCT_E_FACTORS)
if (i == E_AXIS) i += extruder; if (i == E_AXIS) i += extruder;
#endif #endif
@ -1154,9 +1158,6 @@ void Planner::_buffer_steps(const int32_t (&target)[XYZE], float fr_mm_s, const
} }
#endif // XY_FREQUENCY_LIMIT #endif // XY_FREQUENCY_LIMIT
block->nominal_speed = max_stepper_speed; // (mm/sec) Always > 0
block->nominal_rate = CEIL(block->step_event_count * inverse_secs); // (step/sec) Always > 0
// Correct the speed // Correct the speed
if (speed_factor < 1.0) { if (speed_factor < 1.0) {
LOOP_XYZE(i) current_speed[i] *= speed_factor; LOOP_XYZE(i) current_speed[i] *= speed_factor;
@ -1164,9 +1165,6 @@ void Planner::_buffer_steps(const int32_t (&target)[XYZE], float fr_mm_s, const
block->nominal_rate *= speed_factor; block->nominal_rate *= speed_factor;
} }
float safe_speed = block->nominal_speed * min_axis_accel_ratio;
static float previous_safe_speed;
// Compute and limit the acceleration rate for the trapezoid generator. // Compute and limit the acceleration rate for the trapezoid generator.
const float steps_per_mm = block->step_event_count * inverse_millimeters; const float steps_per_mm = block->step_event_count * inverse_millimeters;
uint32_t accel; uint32_t accel;
@ -1268,6 +1266,32 @@ void Planner::_buffer_steps(const int32_t (&target)[XYZE], float fr_mm_s, const
} }
#endif #endif
/**
* Adapted from Průša MKS firmware
* https://github.com/prusa3d/Prusa-Firmware
*
* Start with a safe speed (from which the machine may halt to stop immediately).
*/
// Exit speed limited by a jerk to full halt of a previous last segment
static float previous_safe_speed;
float safe_speed = block->nominal_speed;
uint8_t limited = 0;
LOOP_XYZE(i) {
const float jerk = FABS(current_speed[i]), maxj = max_jerk[i];
if (jerk > maxj) {
if (limited) {
const float mjerk = maxj * block->nominal_speed;
if (jerk * safe_speed > mjerk) safe_speed = mjerk / jerk;
}
else {
++limited;
safe_speed = maxj;
}
}
}
if (moves_queued && !UNEAR_ZERO(previous_nominal_speed)) { if (moves_queued && !UNEAR_ZERO(previous_nominal_speed)) {
// Estimate a maximum velocity allowed at a joint of two successive segments. // Estimate a maximum velocity allowed at a joint of two successive segments.
// If this maximum velocity allowed is lower than the minimum of the entry / exit safe velocities, // If this maximum velocity allowed is lower than the minimum of the entry / exit safe velocities,
@ -1279,7 +1303,7 @@ void Planner::_buffer_steps(const int32_t (&target)[XYZE], float fr_mm_s, const
// Factor to multiply the previous / current nominal velocities to get componentwise limited velocities. // Factor to multiply the previous / current nominal velocities to get componentwise limited velocities.
float v_factor = 1; float v_factor = 1;
uint8_t limited = 0; limited = 0;
// Now limit the jerk in all axes. // Now limit the jerk in all axes.
const float smaller_speed_factor = vmax_junction / previous_nominal_speed; const float smaller_speed_factor = vmax_junction / previous_nominal_speed;
@ -1355,16 +1379,16 @@ void Planner::_buffer_steps(const int32_t (&target)[XYZE], float fr_mm_s, const
* In that case, the retract and move will be executed together. * In that case, the retract and move will be executed together.
* This leads to too many advance steps due to a huge e_acceleration. * This leads to too many advance steps due to a huge e_acceleration.
* The math is good, but we must avoid retract moves with advance! * The math is good, but we must avoid retract moves with advance!
* de > 0 : Extruder is running forward (e.g., for "Wipe while retracting" (Slic3r) or "Combing" (Cura) moves) * lin_dist_e > 0 : Extruder is running forward (e.g., for "Wipe while retracting" (Slic3r) or "Combing" (Cura) moves)
*/ */
block->use_advance_lead = esteps && (block->steps[X_AXIS] || block->steps[Y_AXIS]) block->use_advance_lead = esteps && (block->steps[X_AXIS] || block->steps[Y_AXIS])
&& extruder_advance_k && extruder_advance_k
&& (uint32_t)esteps != block->step_event_count && (uint32_t)esteps != block->step_event_count
&& de > 0; && lin_dist_e > 0;
if (block->use_advance_lead) if (block->use_advance_lead)
block->abs_adv_steps_multiplier8 = LROUND( block->abs_adv_steps_multiplier8 = LROUND(
extruder_advance_k extruder_advance_k
* (UNEAR_ZERO(advance_ed_ratio) ? de * steps_to_mm[E_AXIS_N] / HYPOT(da * steps_to_mm[X_AXIS], db * steps_to_mm[Y_AXIS]) : advance_ed_ratio) // Use the fixed ratio, if set * (UNEAR_ZERO(advance_ed_ratio) ? lin_dist_e / lin_dist_xy : advance_ed_ratio) // Use the fixed ratio, if set
* (block->nominal_speed / (float)block->nominal_rate) * (block->nominal_speed / (float)block->nominal_rate)
* axis_steps_per_mm[E_AXIS_N] * 256.0 * axis_steps_per_mm[E_AXIS_N] * 256.0
); );
@ -1442,16 +1466,69 @@ void Planner::buffer_segment(const float &a, const float &b, const float &c, con
SERIAL_ECHOLNPGM(")"); SERIAL_ECHOLNPGM(")");
//*/ //*/
// DRYRUN ignores all temperature constraints and assures that the extruder is instantly satisfied // DRYRUN prevents E moves from taking place
if (DEBUGGING(DRYRUN)) if (DEBUGGING(DRYRUN)) {
position[E_AXIS] = target[E_AXIS]; position[E_AXIS] = target[E_AXIS];
#if ENABLED(LIN_ADVANCE)
position_float[E_AXIS] = e;
#endif
}
#if ENABLED(LIN_ADVANCE)
lin_dist_e = e - position_float[E_AXIS];
#endif
// If LIN_ADVANCE is enabled then do E move prevention with floats
// Otherwise it's done in _buffer_steps.
#if ENABLED(LIN_ADVANCE) && (ENABLED(PREVENT_COLD_EXTRUSION) || ENABLED(PREVENT_LENGTHY_EXTRUDE))
if (lin_dist_e) {
#if ENABLED(PREVENT_COLD_EXTRUSION)
if (thermalManager.tooColdToExtrude(extruder)) {
position_float[E_AXIS] = e; // Behave as if the move really took place, but ignore E part
position[E_AXIS] = target[E_AXIS];
lin_dist_e = 0;
SERIAL_ECHO_START();
SERIAL_ECHOLNPGM(MSG_ERR_COLD_EXTRUDE_STOP);
}
#endif // PREVENT_COLD_EXTRUSION
#if ENABLED(PREVENT_LENGTHY_EXTRUDE)
if (lin_dist_e * e_factor[extruder] > (EXTRUDE_MAXLENGTH)) {
position_float[E_AXIS] = e; // Behave as if the move really took place, but ignore E part
position[E_AXIS] = target[E_AXIS];
lin_dist_e = 0;
SERIAL_ECHO_START();
SERIAL_ECHOLNPGM(MSG_ERR_LONG_EXTRUDE_STOP);
}
#endif // PREVENT_LENGTHY_EXTRUDE
}
#endif // LIN_ADVANCE && (PREVENT_COLD_EXTRUSION || PREVENT_LENGTHY_EXTRUDE)
#if ENABLED(LIN_ADVANCE)
if (lin_dist_e > 0)
lin_dist_xy = HYPOT(a - position_float[X_AXIS], b - position_float[Y_AXIS]);
#endif
// Always split the first move into two (if not homing or probing) // Always split the first move into two (if not homing or probing)
if (!blocks_queued()) { if (!blocks_queued()) {
#define _BETWEEN(A) (position[A##_AXIS] + target[A##_AXIS]) >> 1 #define _BETWEEN(A) (position[A##_AXIS] + target[A##_AXIS]) >> 1
const int32_t between[XYZE] = { _BETWEEN(X), _BETWEEN(Y), _BETWEEN(Z), _BETWEEN(E) }; const int32_t between[XYZE] = { _BETWEEN(X), _BETWEEN(Y), _BETWEEN(Z), _BETWEEN(E) };
DISABLE_STEPPER_DRIVER_INTERRUPT(); DISABLE_STEPPER_DRIVER_INTERRUPT();
#if ENABLED(LIN_ADVANCE)
lin_dist_xy *= 0.5;
lin_dist_e *= 0.5;
#endif
_buffer_steps(between, fr_mm_s, extruder); _buffer_steps(between, fr_mm_s, extruder);
#if ENABLED(LIN_ADVANCE)
position_float[X_AXIS] = (position_float[X_AXIS] + a) * 0.5;
position_float[Y_AXIS] = (position_float[Y_AXIS] + b) * 0.5;
//position_float[Z_AXIS] = (position_float[Z_AXIS] + c) * 0.5;
position_float[E_AXIS] = (position_float[E_AXIS] + e) * 0.5;
#endif
const uint8_t next = block_buffer_head; const uint8_t next = block_buffer_head;
_buffer_steps(target, fr_mm_s, extruder); _buffer_steps(target, fr_mm_s, extruder);
SBI(block_buffer[next].flag, BLOCK_BIT_CONTINUED); SBI(block_buffer[next].flag, BLOCK_BIT_CONTINUED);
@ -1462,6 +1539,12 @@ void Planner::buffer_segment(const float &a, const float &b, const float &c, con
stepper.wake_up(); stepper.wake_up();
#if ENABLED(LIN_ADVANCE)
position_float[X_AXIS] = a;
position_float[Y_AXIS] = b;
//position_float[Z_AXIS] = c;
position_float[E_AXIS] = e;
#endif
} // buffer_segment() } // buffer_segment()
/** /**
@ -1482,6 +1565,12 @@ void Planner::_set_position_mm(const float &a, const float &b, const float &c, c
nb = position[Y_AXIS] = LROUND(b * axis_steps_per_mm[Y_AXIS]), nb = position[Y_AXIS] = LROUND(b * axis_steps_per_mm[Y_AXIS]),
nc = position[Z_AXIS] = LROUND(c * axis_steps_per_mm[Z_AXIS]), nc = position[Z_AXIS] = LROUND(c * axis_steps_per_mm[Z_AXIS]),
ne = position[E_AXIS] = LROUND(e * axis_steps_per_mm[_EINDEX]); ne = position[E_AXIS] = LROUND(e * axis_steps_per_mm[_EINDEX]);
#if ENABLED(LIN_ADVANCE)
position_float[X_AXIS] = a;
position_float[Y_AXIS] = b;
//position_float[Z_AXIS] = c;
position_float[E_AXIS] = e;
#endif
stepper.set_position(na, nb, nc, ne); stepper.set_position(na, nb, nc, ne);
previous_nominal_speed = 0.0; // Resets planner junction speeds. Assumes start from rest. previous_nominal_speed = 0.0; // Resets planner junction speeds. Assumes start from rest.
ZERO(previous_speed); ZERO(previous_speed);
@ -1506,8 +1595,16 @@ void Planner::set_position_mm_kinematic(const float (&cart)[XYZE]) {
* Sync from the stepper positions. (e.g., after an interrupted move) * Sync from the stepper positions. (e.g., after an interrupted move)
*/ */
void Planner::sync_from_steppers() { void Planner::sync_from_steppers() {
LOOP_XYZE(i) LOOP_XYZE(i) {
position[i] = stepper.position((AxisEnum)i); position[i] = stepper.position((AxisEnum)i);
#if ENABLED(LIN_ADVANCE)
position_float[i] = position[i] * steps_to_mm[i
#if ENABLED(DISTINCT_E_FACTORS)
+ (i == E_AXIS ? active_extruder : 0)
#endif
];
#endif
}
} }
/** /**
@ -1521,6 +1618,9 @@ void Planner::set_position_mm(const AxisEnum axis, const float &v) {
const uint8_t axis_index = axis; const uint8_t axis_index = axis;
#endif #endif
position[axis] = LROUND(v * axis_steps_per_mm[axis_index]); position[axis] = LROUND(v * axis_steps_per_mm[axis_index]);
#if ENABLED(LIN_ADVANCE)
position_float[axis] = v;
#endif
stepper.set_position(axis, v); stepper.set_position(axis, v);
previous_speed[axis] = 0.0; previous_speed[axis] = 0.0;
} }

View File

@ -195,7 +195,9 @@ class Planner {
#endif #endif
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
static float extruder_advance_k, advance_ed_ratio; static float extruder_advance_k, advance_ed_ratio,
position_float[XYZE],
lin_dist_xy, lin_dist_e;
#endif #endif
#if ENABLED(SKEW_CORRECTION) #if ENABLED(SKEW_CORRECTION)