Add GT2560 v3 support (#11914)

This commit is contained in:
InsanityAutomation 2018-09-27 15:13:15 -04:00 committed by Scott Lahteine
parent f2e630a05e
commit cb9dc56630
4 changed files with 128 additions and 0 deletions

View File

@ -83,6 +83,7 @@
#define BOARD_TRIGORILLA_13 343 // TriGorilla Anycubic version 1.3 based on RAMPS EFB
#define BOARD_TRIGORILLA_14 443 // TriGorilla Anycubic version 1.4 based on RAMPS EFB
#define BOARD_RAMPS_ENDER_4 243 // Creality: Ender-4, CR-8
#define BOARD_GT2560_V3 76 // Geeetech A10
//
// Other ATmega1280, ATmega2560

View File

@ -150,6 +150,8 @@
#include "pins_TRIGORILLA_14.h" // ATmega2560 env:megaatmega2560
#elif MB(RAMPS_ENDER_4)
#include "pins_RAMPS_ENDER_4.h" // ATmega2560 env:megaatmega2560
#elif MB(GT2560_V3)
#include "pins_GT2560_V3.h" // ATmega2560 env:megaatmega2560
//
// Other ATmega1280, ATmega2560

View File

@ -143,6 +143,7 @@
#define HEATER_BED_PIN 58
#define FAN_PIN 9
#if ENABLED(FILAMENT_RUNOUT_SENSOR)
#define FIL_RUNOUT_PIN 4
//#define FIL_RUNOUT2_PIN -1

View File

@ -0,0 +1,124 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* GT2560 V3.0 pin assignment
*/
#if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__)
#error "Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
#endif
#ifndef BOARD_NAME
#define BOARD_NAME "GT2560 V3.0"
#endif
//
// Limit Switches
//
#define X_MIN_PIN 24
#define X_MAX_PIN 22
#define Y_MIN_PIN 28
#define Y_MAX_PIN 26
#define Z_MIN_PIN 30
#define Z_MAX_PIN 32
//
// Z Probe (when not Z_MIN_PIN)
//
#ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN 32
#endif
//
// Steppers
//
#define X_STEP_PIN 37
#define X_DIR_PIN 39
#define X_ENABLE_PIN 35
#define Y_STEP_PIN 31
#define Y_DIR_PIN 33
#define Y_ENABLE_PIN 29
#define Z_STEP_PIN 25
#define Z_DIR_PIN 23
#define Z_ENABLE_PIN 27
#define E0_STEP_PIN 46
#define E0_DIR_PIN 44
#define E0_ENABLE_PIN 12
#define E1_STEP_PIN 49
#define E1_DIR_PIN 47
#define E1_ENABLE_PIN 48
//
// Temperature Sensors
//
#define TEMP_0_PIN 11 // Analog Input
#define TEMP_1_PIN 9 // Analog Input
#define TEMP_2_PIN 1 // Analog Input
#define TEMP_BED_PIN 10 // Analog Input
//
// Heaters / Fans
//
#define HEATER_0_PIN 10
#define HEATER_1_PIN 3
#define HEATER_2_PIN 1
#define HEATER_BED_PIN 4
#define FAN_PIN 9
//
// Misc. Functions
//
#define SD_DETECT_PIN 38
#define SDSS 53
#define LED_PIN 6
#define PS_ON_PIN 12
#define SUICIDE_PIN 54 //PIN that has to be turned on right after start, to keep power flowing.
#define SERVO0_PIN 11 //13 untested 3Dtouch
#ifndef CASE_LIGHT_PIN
//#define CASE_LIGHT_PIN 21
#define CASE_LIGHT_PIN 6
#endif
//
// LCD Controller
//
#define BEEPER_PIN 18
#define LCD_PINS_RS 20
#define LCD_PINS_ENABLE 17
#define LCD_PINS_D4 16
#define LCD_PINS_D5 21
#define LCD_PINS_D6 5
#define LCD_PINS_D7 36
#if ENABLED(NEWPANEL)
#define BTN_EN1 42
#define BTN_EN2 40
#define BTN_ENC 19
#endif