From cbcd1ed42d3ce68549063c7c414591ce3c128664 Mon Sep 17 00:00:00 2001 From: Bob-the-Kuhn Date: Sat, 17 Mar 2018 02:57:18 -0500 Subject: [PATCH] full speed --- .../src/HAL/HAL_DUE/usb/conf_usb.h FULL SPEED | 302 ++++++++++++++++++ 1 file changed, 302 insertions(+) create mode 100644 Marlin/src/HAL/HAL_DUE/usb/conf_usb.h FULL SPEED diff --git a/Marlin/src/HAL/HAL_DUE/usb/conf_usb.h FULL SPEED b/Marlin/src/HAL/HAL_DUE/usb/conf_usb.h FULL SPEED new file mode 100644 index 0000000000..5ea008b4ad --- /dev/null +++ b/Marlin/src/HAL/HAL_DUE/usb/conf_usb.h FULL SPEED @@ -0,0 +1,302 @@ +/** + * \file + * + * \brief USB configuration file + * + * Copyright (c) 2011-2015 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * \page License + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ +/* + * Support and FAQ: visit Atmel Support + */ + +#ifndef _CONF_USB_H_ +#define _CONF_USB_H_ + +#undef UNUSED /* To avoid a macro clash as macros.h already defines it */ +#include "../../../core/macros.h" /* For ENABLED()/DISABLED() */ +#include "../../../../Configuration.h" /* For CUSTOM_MACHINE_NAME definition - We just need the name, no C++ allowed! */ +#include "compiler.h" + + +/** + * USB Device Configuration + * @{ + */ + +//! Device definition (mandatory) +#define USB_DEVICE_VENDOR_ID 0x03EB /* ATMEL VID */ +#define USB_DEVICE_PRODUCT_ID 0x2424 /* MSC / CDC */ +#define USB_DEVICE_MAJOR_VERSION 1 +#define USB_DEVICE_MINOR_VERSION 0 +#define USB_DEVICE_POWER 100 // Consumption on Vbus line (mA) +#define USB_DEVICE_ATTR \ + (USB_CONFIG_ATTR_SELF_POWERED) +// (USB_CONFIG_ATTR_BUS_POWERED) +// (USB_CONFIG_ATTR_REMOTE_WAKEUP|USB_CONFIG_ATTR_SELF_POWERED) +// (USB_CONFIG_ATTR_REMOTE_WAKEUP|USB_CONFIG_ATTR_BUS_POWERED) + +//! USB Device string definitions (Optional) +#define USB_DEVICE_MANUFACTURE_NAME "marlinfw.org" +#ifdef CUSTOM_MACHINE_NAME + #define USB_DEVICE_PRODUCT_NAME CUSTOM_MACHINE_NAME +#else + #define USB_DEVICE_PRODUCT_NAME "3D Printer" +#endif +#define USB_DEVICE_SERIAL_NAME "123985739853" + +/** + * Device speeds support + * Low speed not supported by CDC and MSC + * @{ + */ + +//! To define a Low speed device +//#define USB_DEVICE_LOW_SPEED + +//! To define a Full speed device +//#define USB_DEVICE_FULL_SPEED + + +//! To authorize the High speed +#ifndef USB_DEVICE_FULL_SPEED + #if (UC3A3||UC3A4) + //# define USB_DEVICE_HS_SUPPORT + #elif (SAM3XA||SAM3U) + //# define USB_DEVICE_HS_SUPPORT + #endif +#endif +//@} + + +/** + * USB Device Callbacks definitions (Optional) + * @{ + */ +#define UDC_VBUS_EVENT(b_vbus_high) +#define UDC_SOF_EVENT() +#define UDC_SUSPEND_EVENT() +#define UDC_RESUME_EVENT() +#define UDC_GET_EXTRA_STRING() usb_task_extra_string() +#define USB_DEVICE_SPECIFIC_REQUEST() usb_task_other_requests() +//@} + +/** + * USB Device low level configuration + * When only one interface is used, these configurations are defined by the class module. + * For composite device, these configuration must be defined here + * @{ + */ +//! Control endpoint size +#define USB_DEVICE_EP_CTRL_SIZE 64 + +//! Two interfaces for this device (CDC COM + CDC DATA + MSC) +#define USB_DEVICE_NB_INTERFACE 3 + +//! 5 endpoints used by CDC and MSC interfaces +#if SAM3U +// (3 | USB_EP_DIR_IN) // CDC Notify endpoint +// (6 | USB_EP_DIR_IN) // CDC TX +// (5 | USB_EP_DIR_OUT) // CDC RX +// (1 | USB_EP_DIR_IN) // MSC IN +// (2 | USB_EP_DIR_OUT) // MSC OUT +# define USB_DEVICE_MAX_EP 6 +# if defined(USB_DEVICE_HS_SUPPORT) +// In HS mode, size of bulk endpoints are 512 +// If CDC and MSC endpoints all uses 2 banks, DPRAM is not enough: 4 bulk +// endpoints requires 4K bytes. So reduce the number of banks of CDC bulk +// endpoints to use less DPRAM. Keep MSC setting to keep MSC performance. +# define UDD_BULK_NB_BANK(ep) ((ep == 5 || ep== 6) ? 1 : 2) +#endif +#else +// (3 | USB_EP_DIR_IN) // CDC Notify endpoint +// (4 | USB_EP_DIR_IN) // CDC TX +// (5 | USB_EP_DIR_OUT) // CDC RX +// (1 | USB_EP_DIR_IN) // MSC IN +// (2 | USB_EP_DIR_OUT) // MSC OUT +# define USB_DEVICE_MAX_EP 5 +# if SAM3XA && defined(USB_DEVICE_HS_SUPPORT) +// In HS mode, size of bulk endpoints are 512 +// If CDC and MSC endpoints all uses 2 banks, DPRAM is not enough: 4 bulk +// endpoints requires 4K bytes. So reduce the number of banks of CDC bulk +// endpoints to use less DPRAM. Keep MSC setting to keep MSC performance. +# define UDD_BULK_NB_BANK(ep) ((ep == 4 || ep== 5) ? 1 : 2) +# endif +#endif +//@} + +//@} + + +/** + * USB Interface Configuration + * @{ + */ +/** + * Configuration of CDC interface + * @{ + */ + +//! Define one USB communication ports +#define UDI_CDC_PORT_NB 1 + +//! Interface callback definition +#define UDI_CDC_ENABLE_EXT(port) usb_task_cdc_enable(port) +#define UDI_CDC_DISABLE_EXT(port) usb_task_cdc_disable(port) +#define UDI_CDC_RX_NOTIFY(port) usb_task_cdc_rx_notify(port) +#define UDI_CDC_TX_EMPTY_NOTIFY(port) +#define UDI_CDC_SET_CODING_EXT(port,cfg) usb_task_cdc_config(port,cfg) +#define UDI_CDC_SET_DTR_EXT(port,set) usb_task_cdc_set_dtr(port,set) +#define UDI_CDC_SET_RTS_EXT(port,set) + +//! Define it when the transfer CDC Device to Host is a low rate (<512000 bauds) +//! to reduce CDC buffers size +//#define UDI_CDC_LOW_RATE + +//! Default configuration of communication port +#define UDI_CDC_DEFAULT_RATE 115200 +#define UDI_CDC_DEFAULT_STOPBITS CDC_STOP_BITS_1 +#define UDI_CDC_DEFAULT_PARITY CDC_PAR_NONE +#define UDI_CDC_DEFAULT_DATABITS 8 + +//! Enable id string of interface to add an extra USB string +#define UDI_CDC_IAD_STRING_ID 4 + +/** + * USB CDC low level configuration + * In standalone these configurations are defined by the CDC module. + * For composite device, these configuration must be defined here + * @{ + */ +//! Endpoint numbers definition +#if SAM3U +# define UDI_CDC_COMM_EP_0 (3 | USB_EP_DIR_IN) // Notify endpoint +# define UDI_CDC_DATA_EP_IN_0 (6 | USB_EP_DIR_IN) // TX +# define UDI_CDC_DATA_EP_OUT_0 (5 | USB_EP_DIR_OUT)// RX +#else +# define UDI_CDC_COMM_EP_0 (3 | USB_EP_DIR_IN) // Notify endpoint +# define UDI_CDC_DATA_EP_IN_0 (4 | USB_EP_DIR_IN) // TX +# define UDI_CDC_DATA_EP_OUT_0 (5 | USB_EP_DIR_OUT)// RX +#endif + +//! Interface numbers +#define UDI_CDC_COMM_IFACE_NUMBER_0 0 +#define UDI_CDC_DATA_IFACE_NUMBER_0 1 +//@} +//@} + + +/** + * Configuration of MSC interface + * @{ + */ +//! Vendor name and Product version of MSC interface +#define UDI_MSC_GLOBAL_VENDOR_ID \ + 'M', 'A', 'R', 'L', 'I', 'N', '3', 'D' +#define UDI_MSC_GLOBAL_PRODUCT_VERSION \ + '1', '.', '0', '0' + +//! Interface callback definition +#define UDI_MSC_ENABLE_EXT() usb_task_msc_enable() +#define UDI_MSC_DISABLE_EXT() usb_task_msc_disable() + +//! Enable id string of interface to add an extra USB string +#define UDI_MSC_STRING_ID 5 + +/** + * USB MSC low level configuration + * In standalone these configurations are defined by the MSC module. + * For composite device, these configuration must be defined here + * @{ + */ +//! Endpoint numbers definition +#define UDI_MSC_EP_IN (1 | USB_EP_DIR_IN) +#define UDI_MSC_EP_OUT (2 | USB_EP_DIR_OUT) + +//! Interface number +#define UDI_MSC_IFACE_NUMBER 2 +//@} +//@} + +//@} + + +/** + * Description of Composite Device + * @{ + */ +//! USB Interfaces descriptor structure +#define UDI_COMPOSITE_DESC_T \ + usb_iad_desc_t udi_cdc_iad; \ + udi_cdc_comm_desc_t udi_cdc_comm; \ + udi_cdc_data_desc_t udi_cdc_data; \ + udi_msc_desc_t udi_msc + +//! USB Interfaces descriptor value for Full Speed +#define UDI_COMPOSITE_DESC_FS \ + .udi_cdc_iad = UDI_CDC_IAD_DESC_0, \ + .udi_cdc_comm = UDI_CDC_COMM_DESC_0, \ + .udi_cdc_data = UDI_CDC_DATA_DESC_0_FS, \ + .udi_msc = UDI_MSC_DESC_FS + +//! USB Interfaces descriptor value for High Speed +#define UDI_COMPOSITE_DESC_HS \ + .udi_cdc_iad = UDI_CDC_IAD_DESC_0, \ + .udi_cdc_comm = UDI_CDC_COMM_DESC_0, \ + .udi_cdc_data = UDI_CDC_DATA_DESC_0_HS, \ + .udi_msc = UDI_MSC_DESC_HS + +//! USB Interface APIs +#define UDI_COMPOSITE_API \ + &udi_api_cdc_comm, \ + &udi_api_cdc_data, \ + &udi_api_msc +//@} + + +/** + * USB Device Driver Configuration + * @{ + */ +//@} + +//! The includes of classes and other headers must be done at the end of this file to avoid compile error +#include "udi_cdc.h" +#include "udi_msc.h" +#include "usb_task.h" + +#endif // _CONF_USB_H_