TMC Square Wave Stepping mode (#14195)

This commit is contained in:
teemuatlut 2019-06-09 13:08:05 +03:00 committed by Scott Lahteine
parent 80ce0d2bdb
commit cccc51ee0e
79 changed files with 549 additions and 13 deletions

View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8 //#define Z_STALL_SENSITIVITY 8
#endif #endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/** /**
* Enable M122 debugging command for TMC stepper drivers. * Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting. * M122 S0/1 will enable continous reporting.

View File

@ -234,6 +234,9 @@
chopconf.intpol = INTERPOLATE; chopconf.intpol = INTERPOLATE;
chopconf.hend = chopper_timing.hend + 3; chopconf.hend = chopper_timing.hend + 3;
chopconf.hstrt = chopper_timing.hstrt - 1; chopconf.hstrt = chopper_timing.hstrt - 1;
#if ENABLED(SQUARE_WAVE_STEPPING)
chopconf.dedge = true;
#endif
st.CHOPCONF(chopconf.sr); st.CHOPCONF(chopconf.sr);
st.rms_current(mA, HOLD_MULTIPLIER); st.rms_current(mA, HOLD_MULTIPLIER);
@ -274,6 +277,9 @@
chopconf.intpol = INTERPOLATE; chopconf.intpol = INTERPOLATE;
chopconf.hend = timings[1] + 3; chopconf.hend = timings[1] + 3;
chopconf.hstrt = timings[2] - 1; chopconf.hstrt = timings[2] - 1;
#if ENABLED(SQUARE_WAVE_STEPPING)
chopconf.dedge = true;
#endif
st.CHOPCONF(chopconf.sr); st.CHOPCONF(chopconf.sr);
st.rms_current(mA, HOLD_MULTIPLIER); st.rms_current(mA, HOLD_MULTIPLIER);
@ -515,6 +521,9 @@
chopconf.intpol = INTERPOLATE; chopconf.intpol = INTERPOLATE;
chopconf.hend = chopper_timing.hend + 3; chopconf.hend = chopper_timing.hend + 3;
chopconf.hstrt = chopper_timing.hstrt - 1; chopconf.hstrt = chopper_timing.hstrt - 1;
#if ENABLED(SQUARE_WAVE_STEPPING)
chopconf.dedge = true;
#endif
st.CHOPCONF(chopconf.sr); st.CHOPCONF(chopconf.sr);
st.rms_current(mA, HOLD_MULTIPLIER); st.rms_current(mA, HOLD_MULTIPLIER);
@ -553,6 +562,9 @@
chopconf.toff = chopper_timing.toff; chopconf.toff = chopper_timing.toff;
chopconf.hend = chopper_timing.hend + 3; chopconf.hend = chopper_timing.hend + 3;
chopconf.hstrt = chopper_timing.hstrt - 1; chopconf.hstrt = chopper_timing.hstrt - 1;
#if ENABLED(SQUARE_WAVE_STEPPING)
chopconf.dedge = true;
#endif
st.CHOPCONF(chopconf.sr); st.CHOPCONF(chopconf.sr);
st.rms_current(mA); st.rms_current(mA);
@ -577,6 +589,9 @@
chopconf.intpol = INTERPOLATE; chopconf.intpol = INTERPOLATE;
chopconf.hend = chopper_timing.hend + 3; chopconf.hend = chopper_timing.hend + 3;
chopconf.hstrt = chopper_timing.hstrt - 1; chopconf.hstrt = chopper_timing.hstrt - 1;
#if ENABLED(SQUARE_WAVE_STEPPING)
chopconf.dedge = true;
#endif
st.CHOPCONF(chopconf.sr); st.CHOPCONF(chopconf.sr);
st.rms_current(mA, HOLD_MULTIPLIER); st.rms_current(mA, HOLD_MULTIPLIER);
@ -617,6 +632,9 @@
chopconf.intpol = INTERPOLATE; chopconf.intpol = INTERPOLATE;
chopconf.hend = timings[1] + 3; chopconf.hend = timings[1] + 3;
chopconf.hstrt = timings[2] - 1; chopconf.hstrt = timings[2] - 1;
#if ENABLED(SQUARE_WAVE_STEPPING)
chopconf.dedge = true;
#endif
st.CHOPCONF(chopconf.sr); st.CHOPCONF(chopconf.sr);
st.rms_current(mA, HOLD_MULTIPLIER); st.rms_current(mA, HOLD_MULTIPLIER);

View File

@ -127,7 +127,11 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
#define X_DIR_READ READ(X_DIR_PIN) #define X_DIR_READ READ(X_DIR_PIN)
#endif #endif
#define X_STEP_INIT SET_OUTPUT(X_STEP_PIN) #define X_STEP_INIT SET_OUTPUT(X_STEP_PIN)
#define X_STEP_WRITE(STATE) WRITE(X_STEP_PIN,STATE) #if AXIS_IS_TMC(X) && ENABLED(SQUARE_WAVE_STEPPING)
#define X_STEP_WRITE(STATE) do { if(STATE) TOGGLE(X_STEP_PIN); } while(0)
#else
#define X_STEP_WRITE(STATE) WRITE(X_STEP_PIN,STATE)
#endif
#define X_STEP_READ READ(X_STEP_PIN) #define X_STEP_READ READ(X_STEP_PIN)
// Y Stepper // Y Stepper
@ -162,7 +166,11 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
#define Y_DIR_READ READ(Y_DIR_PIN) #define Y_DIR_READ READ(Y_DIR_PIN)
#endif #endif
#define Y_STEP_INIT SET_OUTPUT(Y_STEP_PIN) #define Y_STEP_INIT SET_OUTPUT(Y_STEP_PIN)
#define Y_STEP_WRITE(STATE) WRITE(Y_STEP_PIN,STATE) #if AXIS_IS_TMC(Y) && ENABLED(SQUARE_WAVE_STEPPING)
#define Y_STEP_WRITE(STATE) do { if (STATE) TOGGLE(Y_STEP_PIN); } while(0)
#else
#define Y_STEP_WRITE(STATE) WRITE(Y_STEP_PIN,STATE)
#endif
#define Y_STEP_READ READ(Y_STEP_PIN) #define Y_STEP_READ READ(Y_STEP_PIN)
// Z Stepper // Z Stepper
@ -197,7 +205,11 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
#define Z_DIR_READ READ(Z_DIR_PIN) #define Z_DIR_READ READ(Z_DIR_PIN)
#endif #endif
#define Z_STEP_INIT SET_OUTPUT(Z_STEP_PIN) #define Z_STEP_INIT SET_OUTPUT(Z_STEP_PIN)
#define Z_STEP_WRITE(STATE) WRITE(Z_STEP_PIN,STATE) #if AXIS_IS_TMC(Z) && ENABLED(SQUARE_WAVE_STEPPING)
#define Z_STEP_WRITE(STATE) do { if(STATE) TOGGLE(Z_STEP_PIN); } while(0)
#else
#define Z_STEP_WRITE(STATE) WRITE(Z_STEP_PIN,STATE)
#endif
#define Z_STEP_READ READ(Z_STEP_PIN) #define Z_STEP_READ READ(Z_STEP_PIN)
// X2 Stepper // X2 Stepper
@ -233,7 +245,12 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
#define X2_DIR_READ READ(X2_DIR_PIN) #define X2_DIR_READ READ(X2_DIR_PIN)
#endif #endif
#define X2_STEP_INIT SET_OUTPUT(X2_STEP_PIN) #define X2_STEP_INIT SET_OUTPUT(X2_STEP_PIN)
#define X2_STEP_WRITE(STATE) WRITE(X2_STEP_PIN,STATE) #if AXIS_IS_TMC(X2) && ENABLED(SQUARE_WAVE_STEPPING)
#define X2_STEP_WRITE(STATE) do { if(STATE) TOGGLE(X2_STEP_PIN); } while(0)
#else
#define X2_STEP_WRITE(STATE) WRITE(X2_STEP_PIN,STATE)
#endif
#define X2_STEP_READ READ(X2_STEP_PIN) #define X2_STEP_READ READ(X2_STEP_PIN)
#endif #endif
@ -270,7 +287,12 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
#define Y2_DIR_READ READ(Y2_DIR_PIN) #define Y2_DIR_READ READ(Y2_DIR_PIN)
#endif #endif
#define Y2_STEP_INIT SET_OUTPUT(Y2_STEP_PIN) #define Y2_STEP_INIT SET_OUTPUT(Y2_STEP_PIN)
#define Y2_STEP_WRITE(STATE) WRITE(Y2_STEP_PIN,STATE) #if AXIS_IS_TMC(Y2) && ENABLED(SQUARE_WAVE_STEPPING)
#define Y2_STEP_WRITE(STATE) do { if(STATE) TOGGLE(Y2_STEP_PIN); } while(0)
#else
#define Y2_STEP_WRITE(STATE) WRITE(Y2_STEP_PIN,STATE)
#endif
#define Y2_STEP_READ READ(Y2_STEP_PIN) #define Y2_STEP_READ READ(Y2_STEP_PIN)
#else #else
#define Y2_DIR_WRITE(STATE) NOOP #define Y2_DIR_WRITE(STATE) NOOP
@ -309,7 +331,12 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
#define Z2_DIR_READ READ(Z2_DIR_PIN) #define Z2_DIR_READ READ(Z2_DIR_PIN)
#endif #endif
#define Z2_STEP_INIT SET_OUTPUT(Z2_STEP_PIN) #define Z2_STEP_INIT SET_OUTPUT(Z2_STEP_PIN)
#define Z2_STEP_WRITE(STATE) WRITE(Z2_STEP_PIN,STATE) #if AXIS_IS_TMC(Z2) && ENABLED(SQUARE_WAVE_STEPPING)
#define Z2_STEP_WRITE(STATE) do { if(STATE) TOGGLE(Z2_STEP_PIN); } while(0)
#else
#define Z2_STEP_WRITE(STATE) WRITE(Z2_STEP_PIN,STATE)
#endif
#define Z2_STEP_READ READ(Z2_STEP_PIN) #define Z2_STEP_READ READ(Z2_STEP_PIN)
#else #else
#define Z2_DIR_WRITE(STATE) NOOP #define Z2_DIR_WRITE(STATE) NOOP
@ -348,7 +375,12 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
#define Z3_DIR_READ READ(Z3_DIR_PIN) #define Z3_DIR_READ READ(Z3_DIR_PIN)
#endif #endif
#define Z3_STEP_INIT SET_OUTPUT(Z3_STEP_PIN) #define Z3_STEP_INIT SET_OUTPUT(Z3_STEP_PIN)
#define Z3_STEP_WRITE(STATE) WRITE(Z3_STEP_PIN,STATE) #if AXIS_IS_TMC(Z3) && ENABLED(SQUARE_WAVE_STEPPING)
#define Z3_STEP_WRITE(STATE) do { if(STATE) TOGGLE(Z3_STEP_PIN); } while(0)
#else
#define Z3_STEP_WRITE(STATE) WRITE(Z3_STEP_PIN,STATE)
#endif
#define Z3_STEP_READ READ(Z3_STEP_PIN) #define Z3_STEP_READ READ(Z3_STEP_PIN)
#else #else
#define Z3_DIR_WRITE(STATE) NOOP #define Z3_DIR_WRITE(STATE) NOOP
@ -386,7 +418,11 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
#define E0_DIR_READ READ(E0_DIR_PIN) #define E0_DIR_READ READ(E0_DIR_PIN)
#endif #endif
#define E0_STEP_INIT SET_OUTPUT(E0_STEP_PIN) #define E0_STEP_INIT SET_OUTPUT(E0_STEP_PIN)
#define E0_STEP_WRITE(STATE) WRITE(E0_STEP_PIN,STATE) #if AXIS_IS_TMC(E0) && ENABLED(SQUARE_WAVE_STEPPING)
#define E0_STEP_WRITE(STATE) do { if(STATE) TOGGLE(E0_STEP_PIN); } while(0)
#else
#define E0_STEP_WRITE(STATE) WRITE(E0_STEP_PIN,STATE)
#endif
#define E0_STEP_READ READ(E0_STEP_PIN) #define E0_STEP_READ READ(E0_STEP_PIN)
// E1 Stepper // E1 Stepper
@ -421,7 +457,11 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
#define E1_DIR_READ READ(E1_DIR_PIN) #define E1_DIR_READ READ(E1_DIR_PIN)
#endif #endif
#define E1_STEP_INIT SET_OUTPUT(E1_STEP_PIN) #define E1_STEP_INIT SET_OUTPUT(E1_STEP_PIN)
#define E1_STEP_WRITE(STATE) WRITE(E1_STEP_PIN,STATE) #if AXIS_IS_TMC(E1) && ENABLED(SQUARE_WAVE_STEPPING)
#define E1_STEP_WRITE(STATE) do { if(STATE) TOGGLE(E1_STEP_PIN); } while(0)
#else
#define E1_STEP_WRITE(STATE) WRITE(E1_STEP_PIN,STATE)
#endif
#define E1_STEP_READ READ(E1_STEP_PIN) #define E1_STEP_READ READ(E1_STEP_PIN)
// E2 Stepper // E2 Stepper
@ -456,7 +496,11 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
#define E2_DIR_READ READ(E2_DIR_PIN) #define E2_DIR_READ READ(E2_DIR_PIN)
#endif #endif
#define E2_STEP_INIT SET_OUTPUT(E2_STEP_PIN) #define E2_STEP_INIT SET_OUTPUT(E2_STEP_PIN)
#define E2_STEP_WRITE(STATE) WRITE(E2_STEP_PIN,STATE) #if AXIS_IS_TMC(E2) && ENABLED(SQUARE_WAVE_STEPPING)
#define E2_STEP_WRITE(STATE) do { if(STATE) TOGGLE(E2_STEP_PIN); } while(0)
#else
#define E2_STEP_WRITE(STATE) WRITE(E2_STEP_PIN,STATE)
#endif
#define E2_STEP_READ READ(E2_STEP_PIN) #define E2_STEP_READ READ(E2_STEP_PIN)
// E3 Stepper // E3 Stepper
@ -491,7 +535,11 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
#define E3_DIR_READ READ(E3_DIR_PIN) #define E3_DIR_READ READ(E3_DIR_PIN)
#endif #endif
#define E3_STEP_INIT SET_OUTPUT(E3_STEP_PIN) #define E3_STEP_INIT SET_OUTPUT(E3_STEP_PIN)
#define E3_STEP_WRITE(STATE) WRITE(E3_STEP_PIN,STATE) #if AXIS_IS_TMC(E3) && ENABLED(SQUARE_WAVE_STEPPING)
#define E3_STEP_WRITE(STATE) do { if(STATE) TOGGLE(E3_STEP_PIN); } while(0)
#else
#define E3_STEP_WRITE(STATE) WRITE(E3_STEP_PIN,STATE)
#endif
#define E3_STEP_READ READ(E3_STEP_PIN) #define E3_STEP_READ READ(E3_STEP_PIN)
// E4 Stepper // E4 Stepper
@ -526,7 +574,11 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
#define E4_DIR_READ READ(E4_DIR_PIN) #define E4_DIR_READ READ(E4_DIR_PIN)
#endif #endif
#define E4_STEP_INIT SET_OUTPUT(E4_STEP_PIN) #define E4_STEP_INIT SET_OUTPUT(E4_STEP_PIN)
#define E4_STEP_WRITE(STATE) WRITE(E4_STEP_PIN,STATE) #if AXIS_IS_TMC(E4) && ENABLED(SQUARE_WAVE_STEPPING)
#define E4_STEP_WRITE(STATE) do { if(STATE) TOGGLE(E4_STEP_PIN); } while(0)
#else
#define E4_STEP_WRITE(STATE) WRITE(E4_STEP_PIN,STATE)
#endif
#define E4_STEP_READ READ(E4_STEP_PIN) #define E4_STEP_READ READ(E4_STEP_PIN)
// E5 Stepper // E5 Stepper
@ -561,7 +613,11 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
#define E5_DIR_READ READ(E5_DIR_PIN) #define E5_DIR_READ READ(E5_DIR_PIN)
#endif #endif
#define E5_STEP_INIT SET_OUTPUT(E5_STEP_PIN) #define E5_STEP_INIT SET_OUTPUT(E5_STEP_PIN)
#define E5_STEP_WRITE(STATE) WRITE(E5_STEP_PIN,STATE) #if AXIS_IS_TMC(E5) && ENABLED(SQUARE_WAVE_STEPPING)
#define E5_STEP_WRITE(STATE) do { if(STATE) TOGGLE(E5_STEP_PIN); } while(0)
#else
#define E5_STEP_WRITE(STATE) WRITE(E5_STEP_PIN,STATE)
#endif
#define E5_STEP_READ READ(E5_STEP_PIN) #define E5_STEP_READ READ(E5_STEP_PIN)
/** /**

View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8 //#define Z_STALL_SENSITIVITY 8
#endif #endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/** /**
* Enable M122 debugging command for TMC stepper drivers. * Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting. * M122 S0/1 will enable continous reporting.

View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8 //#define Z_STALL_SENSITIVITY 8
#endif #endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/** /**
* Enable M122 debugging command for TMC stepper drivers. * Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting. * M122 S0/1 will enable continous reporting.

View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8 //#define Z_STALL_SENSITIVITY 8
#endif #endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/** /**
* Enable M122 debugging command for TMC stepper drivers. * Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting. * M122 S0/1 will enable continous reporting.

View File

@ -1763,6 +1763,12 @@
//#define Z_STALL_SENSITIVITY 8 //#define Z_STALL_SENSITIVITY 8
#endif #endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/** /**
* Enable M122 debugging command for TMC stepper drivers. * Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting. * M122 S0/1 will enable continous reporting.

View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8 //#define Z_STALL_SENSITIVITY 8
#endif #endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/** /**
* Enable M122 debugging command for TMC stepper drivers. * Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting. * M122 S0/1 will enable continous reporting.

View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8 //#define Z_STALL_SENSITIVITY 8
#endif #endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/** /**
* Enable M122 debugging command for TMC stepper drivers. * Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting. * M122 S0/1 will enable continous reporting.

View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8 //#define Z_STALL_SENSITIVITY 8
#endif #endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/** /**
* Enable M122 debugging command for TMC stepper drivers. * Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting. * M122 S0/1 will enable continous reporting.

View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8 //#define Z_STALL_SENSITIVITY 8
#endif #endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/** /**
* Enable M122 debugging command for TMC stepper drivers. * Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting. * M122 S0/1 will enable continous reporting.

View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8 //#define Z_STALL_SENSITIVITY 8
#endif #endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/** /**
* Enable M122 debugging command for TMC stepper drivers. * Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting. * M122 S0/1 will enable continous reporting.

View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8 //#define Z_STALL_SENSITIVITY 8
#endif #endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/** /**
* Enable M122 debugging command for TMC stepper drivers. * Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting. * M122 S0/1 will enable continous reporting.

View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8 //#define Z_STALL_SENSITIVITY 8
#endif #endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/** /**
* Enable M122 debugging command for TMC stepper drivers. * Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting. * M122 S0/1 will enable continous reporting.

View File

@ -1765,6 +1765,12 @@
//#define Z_STALL_SENSITIVITY 8 //#define Z_STALL_SENSITIVITY 8
#endif #endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/** /**
* Enable M122 debugging command for TMC stepper drivers. * Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting. * M122 S0/1 will enable continous reporting.

View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8 //#define Z_STALL_SENSITIVITY 8
#endif #endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/** /**
* Enable M122 debugging command for TMC stepper drivers. * Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting. * M122 S0/1 will enable continous reporting.

View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8 //#define Z_STALL_SENSITIVITY 8
#endif #endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/** /**
* Enable M122 debugging command for TMC stepper drivers. * Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting. * M122 S0/1 will enable continous reporting.

View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8 //#define Z_STALL_SENSITIVITY 8
#endif #endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/** /**
* Enable M122 debugging command for TMC stepper drivers. * Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting. * M122 S0/1 will enable continous reporting.

View File

@ -1769,6 +1769,12 @@
//#define Z_STALL_SENSITIVITY 8 //#define Z_STALL_SENSITIVITY 8
#endif #endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/** /**
* Enable M122 debugging command for TMC stepper drivers. * Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting. * M122 S0/1 will enable continous reporting.

View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8 //#define Z_STALL_SENSITIVITY 8
#endif #endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/** /**
* Enable M122 debugging command for TMC stepper drivers. * Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting. * M122 S0/1 will enable continous reporting.

View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8 //#define Z_STALL_SENSITIVITY 8
#endif #endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/** /**
* Enable M122 debugging command for TMC stepper drivers. * Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting. * M122 S0/1 will enable continous reporting.

View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8 //#define Z_STALL_SENSITIVITY 8
#endif #endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/** /**
* Enable M122 debugging command for TMC stepper drivers. * Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting. * M122 S0/1 will enable continous reporting.

View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8 //#define Z_STALL_SENSITIVITY 8
#endif #endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/** /**
* Enable M122 debugging command for TMC stepper drivers. * Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting. * M122 S0/1 will enable continous reporting.

View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8 //#define Z_STALL_SENSITIVITY 8
#endif #endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/** /**
* Enable M122 debugging command for TMC stepper drivers. * Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting. * M122 S0/1 will enable continous reporting.

View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8 //#define Z_STALL_SENSITIVITY 8
#endif #endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/** /**
* Enable M122 debugging command for TMC stepper drivers. * Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting. * M122 S0/1 will enable continous reporting.

View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8 //#define Z_STALL_SENSITIVITY 8
#endif #endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/** /**
* Enable M122 debugging command for TMC stepper drivers. * Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting. * M122 S0/1 will enable continous reporting.

View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8 //#define Z_STALL_SENSITIVITY 8
#endif #endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/** /**
* Enable M122 debugging command for TMC stepper drivers. * Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting. * M122 S0/1 will enable continous reporting.

View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8 //#define Z_STALL_SENSITIVITY 8
#endif #endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/** /**
* Enable M122 debugging command for TMC stepper drivers. * Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting. * M122 S0/1 will enable continous reporting.

View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8 //#define Z_STALL_SENSITIVITY 8
#endif #endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/** /**
* Enable M122 debugging command for TMC stepper drivers. * Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting. * M122 S0/1 will enable continous reporting.

View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8 //#define Z_STALL_SENSITIVITY 8
#endif #endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/** /**
* Enable M122 debugging command for TMC stepper drivers. * Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting. * M122 S0/1 will enable continous reporting.

View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8 //#define Z_STALL_SENSITIVITY 8
#endif #endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/** /**
* Enable M122 debugging command for TMC stepper drivers. * Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting. * M122 S0/1 will enable continous reporting.

View File

@ -1760,6 +1760,12 @@
//#define Z_STALL_SENSITIVITY 8 //#define Z_STALL_SENSITIVITY 8
#endif #endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/** /**
* Enable M122 debugging command for TMC stepper drivers. * Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting. * M122 S0/1 will enable continous reporting.

View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8 //#define Z_STALL_SENSITIVITY 8
#endif #endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/** /**
* Enable M122 debugging command for TMC stepper drivers. * Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting. * M122 S0/1 will enable continous reporting.

View File

@ -1763,6 +1763,12 @@
//#define Z_STALL_SENSITIVITY 8 //#define Z_STALL_SENSITIVITY 8
#endif #endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/** /**
* Enable M122 debugging command for TMC stepper drivers. * Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting. * M122 S0/1 will enable continous reporting.

View File

@ -1765,6 +1765,12 @@
//#define Z_STALL_SENSITIVITY 8 //#define Z_STALL_SENSITIVITY 8
#endif #endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/** /**
* Enable M122 debugging command for TMC stepper drivers. * Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting. * M122 S0/1 will enable continous reporting.

View File

@ -1765,6 +1765,12 @@
//#define Z_STALL_SENSITIVITY 8 //#define Z_STALL_SENSITIVITY 8
#endif #endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/** /**
* Enable M122 debugging command for TMC stepper drivers. * Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting. * M122 S0/1 will enable continous reporting.

View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8 //#define Z_STALL_SENSITIVITY 8
#endif #endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/** /**
* Enable M122 debugging command for TMC stepper drivers. * Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting. * M122 S0/1 will enable continous reporting.

View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8 //#define Z_STALL_SENSITIVITY 8
#endif #endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/** /**
* Enable M122 debugging command for TMC stepper drivers. * Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting. * M122 S0/1 will enable continous reporting.

View File

@ -1760,6 +1760,12 @@
//#define Z_STALL_SENSITIVITY 8 //#define Z_STALL_SENSITIVITY 8
#endif #endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/** /**
* Enable M122 debugging command for TMC stepper drivers. * Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting. * M122 S0/1 will enable continous reporting.

View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8 //#define Z_STALL_SENSITIVITY 8
#endif #endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/** /**
* Enable M122 debugging command for TMC stepper drivers. * Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting. * M122 S0/1 will enable continous reporting.

View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8 //#define Z_STALL_SENSITIVITY 8
#endif #endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/** /**
* Enable M122 debugging command for TMC stepper drivers. * Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting. * M122 S0/1 will enable continous reporting.

View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8 //#define Z_STALL_SENSITIVITY 8
#endif #endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/** /**
* Enable M122 debugging command for TMC stepper drivers. * Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting. * M122 S0/1 will enable continous reporting.

View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8 //#define Z_STALL_SENSITIVITY 8
#endif #endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/** /**
* Enable M122 debugging command for TMC stepper drivers. * Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting. * M122 S0/1 will enable continous reporting.

View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8 //#define Z_STALL_SENSITIVITY 8
#endif #endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/** /**
* Enable M122 debugging command for TMC stepper drivers. * Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting. * M122 S0/1 will enable continous reporting.

View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8 //#define Z_STALL_SENSITIVITY 8
#endif #endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/** /**
* Enable M122 debugging command for TMC stepper drivers. * Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting. * M122 S0/1 will enable continous reporting.

View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8 //#define Z_STALL_SENSITIVITY 8
#endif #endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/** /**
* Enable M122 debugging command for TMC stepper drivers. * Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting. * M122 S0/1 will enable continous reporting.

View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8 //#define Z_STALL_SENSITIVITY 8
#endif #endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/** /**
* Enable M122 debugging command for TMC stepper drivers. * Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting. * M122 S0/1 will enable continous reporting.

View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8 //#define Z_STALL_SENSITIVITY 8
#endif #endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/** /**
* Enable M122 debugging command for TMC stepper drivers. * Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting. * M122 S0/1 will enable continous reporting.

View File

@ -1762,6 +1762,12 @@
//#define Z_STALL_SENSITIVITY 8 //#define Z_STALL_SENSITIVITY 8
#endif #endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/** /**
* Enable M122 debugging command for TMC stepper drivers. * Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting. * M122 S0/1 will enable continous reporting.

View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8 //#define Z_STALL_SENSITIVITY 8
#endif #endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/** /**
* Enable M122 debugging command for TMC stepper drivers. * Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting. * M122 S0/1 will enable continous reporting.

View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8 //#define Z_STALL_SENSITIVITY 8
#endif #endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/** /**
* Enable M122 debugging command for TMC stepper drivers. * Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting. * M122 S0/1 will enable continous reporting.

View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8 //#define Z_STALL_SENSITIVITY 8
#endif #endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/** /**
* Enable M122 debugging command for TMC stepper drivers. * Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting. * M122 S0/1 will enable continous reporting.

View File

@ -1759,6 +1759,12 @@
//#define Z_STALL_SENSITIVITY 8 //#define Z_STALL_SENSITIVITY 8
#endif #endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/** /**
* Enable M122 debugging command for TMC stepper drivers. * Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting. * M122 S0/1 will enable continous reporting.

View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8 //#define Z_STALL_SENSITIVITY 8
#endif #endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/** /**
* Enable M122 debugging command for TMC stepper drivers. * Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting. * M122 S0/1 will enable continous reporting.

View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8 //#define Z_STALL_SENSITIVITY 8
#endif #endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/** /**
* Enable M122 debugging command for TMC stepper drivers. * Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting. * M122 S0/1 will enable continous reporting.

View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8 //#define Z_STALL_SENSITIVITY 8
#endif #endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/** /**
* Enable M122 debugging command for TMC stepper drivers. * Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting. * M122 S0/1 will enable continous reporting.

View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8 //#define Z_STALL_SENSITIVITY 8
#endif #endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/** /**
* Enable M122 debugging command for TMC stepper drivers. * Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting. * M122 S0/1 will enable continous reporting.

View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8 //#define Z_STALL_SENSITIVITY 8
#endif #endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/** /**
* Enable M122 debugging command for TMC stepper drivers. * Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting. * M122 S0/1 will enable continous reporting.

View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8 //#define Z_STALL_SENSITIVITY 8
#endif #endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/** /**
* Enable M122 debugging command for TMC stepper drivers. * Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting. * M122 S0/1 will enable continous reporting.

View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8 //#define Z_STALL_SENSITIVITY 8
#endif #endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/** /**
* Enable M122 debugging command for TMC stepper drivers. * Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting. * M122 S0/1 will enable continous reporting.

View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8 //#define Z_STALL_SENSITIVITY 8
#endif #endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/** /**
* Enable M122 debugging command for TMC stepper drivers. * Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting. * M122 S0/1 will enable continous reporting.

View File

@ -1774,6 +1774,12 @@
//#define Z_STALL_SENSITIVITY 8 //#define Z_STALL_SENSITIVITY 8
#endif #endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/** /**
* Enable M122 debugging command for TMC stepper drivers. * Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting. * M122 S0/1 will enable continous reporting.

View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8 //#define Z_STALL_SENSITIVITY 8
#endif #endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/** /**
* Enable M122 debugging command for TMC stepper drivers. * Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting. * M122 S0/1 will enable continous reporting.

View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8 //#define Z_STALL_SENSITIVITY 8
#endif #endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/** /**
* Enable M122 debugging command for TMC stepper drivers. * Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting. * M122 S0/1 will enable continous reporting.

View File

@ -1763,6 +1763,12 @@
//#define Z_STALL_SENSITIVITY 8 //#define Z_STALL_SENSITIVITY 8
#endif #endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/** /**
* Enable M122 debugging command for TMC stepper drivers. * Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting. * M122 S0/1 will enable continous reporting.

View File

@ -1760,6 +1760,12 @@
//#define Z_STALL_SENSITIVITY 8 //#define Z_STALL_SENSITIVITY 8
#endif #endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/** /**
* Enable M122 debugging command for TMC stepper drivers. * Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting. * M122 S0/1 will enable continous reporting.

View File

@ -1760,6 +1760,12 @@
//#define Z_STALL_SENSITIVITY 8 //#define Z_STALL_SENSITIVITY 8
#endif #endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/** /**
* Enable M122 debugging command for TMC stepper drivers. * Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting. * M122 S0/1 will enable continous reporting.

View File

@ -1760,6 +1760,12 @@
//#define Z_STALL_SENSITIVITY 8 //#define Z_STALL_SENSITIVITY 8
#endif #endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/** /**
* Enable M122 debugging command for TMC stepper drivers. * Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting. * M122 S0/1 will enable continous reporting.

View File

@ -1760,6 +1760,12 @@
//#define Z_STALL_SENSITIVITY 8 //#define Z_STALL_SENSITIVITY 8
#endif #endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/** /**
* Enable M122 debugging command for TMC stepper drivers. * Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting. * M122 S0/1 will enable continous reporting.

View File

@ -1760,6 +1760,12 @@
//#define Z_STALL_SENSITIVITY 8 //#define Z_STALL_SENSITIVITY 8
#endif #endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/** /**
* Enable M122 debugging command for TMC stepper drivers. * Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting. * M122 S0/1 will enable continous reporting.

View File

@ -1760,6 +1760,12 @@
//#define Z_STALL_SENSITIVITY 8 //#define Z_STALL_SENSITIVITY 8
#endif #endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/** /**
* Enable M122 debugging command for TMC stepper drivers. * Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting. * M122 S0/1 will enable continous reporting.

View File

@ -1760,6 +1760,12 @@
//#define Z_STALL_SENSITIVITY 8 //#define Z_STALL_SENSITIVITY 8
#endif #endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/** /**
* Enable M122 debugging command for TMC stepper drivers. * Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting. * M122 S0/1 will enable continous reporting.

View File

@ -1760,6 +1760,12 @@
//#define Z_STALL_SENSITIVITY 8 //#define Z_STALL_SENSITIVITY 8
#endif #endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/** /**
* Enable M122 debugging command for TMC stepper drivers. * Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting. * M122 S0/1 will enable continous reporting.

View File

@ -1759,6 +1759,12 @@
//#define Z_STALL_SENSITIVITY 8 //#define Z_STALL_SENSITIVITY 8
#endif #endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/** /**
* Enable M122 debugging command for TMC stepper drivers. * Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting. * M122 S0/1 will enable continous reporting.

View File

@ -1760,6 +1760,12 @@
//#define Z_STALL_SENSITIVITY 8 //#define Z_STALL_SENSITIVITY 8
#endif #endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/** /**
* Enable M122 debugging command for TMC stepper drivers. * Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting. * M122 S0/1 will enable continous reporting.

View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8 //#define Z_STALL_SENSITIVITY 8
#endif #endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/** /**
* Enable M122 debugging command for TMC stepper drivers. * Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting. * M122 S0/1 will enable continous reporting.

View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8 //#define Z_STALL_SENSITIVITY 8
#endif #endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/** /**
* Enable M122 debugging command for TMC stepper drivers. * Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting. * M122 S0/1 will enable continous reporting.

View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8 //#define Z_STALL_SENSITIVITY 8
#endif #endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/** /**
* Enable M122 debugging command for TMC stepper drivers. * Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting. * M122 S0/1 will enable continous reporting.

View File

@ -1762,6 +1762,12 @@
//#define Z_STALL_SENSITIVITY 8 //#define Z_STALL_SENSITIVITY 8
#endif #endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/** /**
* Enable M122 debugging command for TMC stepper drivers. * Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting. * M122 S0/1 will enable continous reporting.