From cea2ab1d7fac912ae29db9e7c2e6e8bc4c3a2e1f Mon Sep 17 00:00:00 2001 From: alextrical <35117191+alextrical@users.noreply.github.com> Date: Fri, 16 Dec 2022 20:45:14 +0000 Subject: [PATCH] =?UTF-8?q?=E2=9C=A8=20BigTreeTech=20EBB42=20v1.1=20(#2496?= =?UTF-8?q?4)?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit --- Marlin/src/core/boards.h | 93 ++--- Marlin/src/feature/controllerfan.cpp | 2 +- Marlin/src/pins/pins.h | 2 + Marlin/src/pins/stm32g0/pins_BTT_EBB42_V1_1.h | 153 +++++++ .../boards/marlin_BTT_EBB42_V1_1.json | 47 +++ .../MARLIN_BTT_EBB42_V1_1/PeripheralPins.c | 377 ++++++++++++++++++ .../MARLIN_BTT_EBB42_V1_1/PinNamesVar.h | 78 ++++ .../MARLIN_BTT_EBB42_V1_1/ldscript.ld | 185 +++++++++ .../variant_MARLIN_BTT_EBB42_V1_1.cpp | 138 +++++++ .../variant_MARLIN_BTT_EBB42_V1_1.h | 198 +++++++++ ini/stm32g0.ini | 23 +- 11 files changed, 1248 insertions(+), 48 deletions(-) create mode 100644 Marlin/src/pins/stm32g0/pins_BTT_EBB42_V1_1.h create mode 100644 buildroot/share/PlatformIO/boards/marlin_BTT_EBB42_V1_1.json create mode 100644 buildroot/share/PlatformIO/variants/MARLIN_BTT_EBB42_V1_1/PeripheralPins.c create mode 100644 buildroot/share/PlatformIO/variants/MARLIN_BTT_EBB42_V1_1/PinNamesVar.h create mode 100644 buildroot/share/PlatformIO/variants/MARLIN_BTT_EBB42_V1_1/ldscript.ld create mode 100644 buildroot/share/PlatformIO/variants/MARLIN_BTT_EBB42_V1_1/variant_MARLIN_BTT_EBB42_V1_1.cpp create mode 100644 buildroot/share/PlatformIO/variants/MARLIN_BTT_EBB42_V1_1/variant_MARLIN_BTT_EBB42_V1_1.h diff --git a/Marlin/src/core/boards.h b/Marlin/src/core/boards.h index 15767a8185..fe904846e3 100644 --- a/Marlin/src/core/boards.h +++ b/Marlin/src/core/boards.h @@ -325,52 +325,53 @@ #define BOARD_MKS_ROBIN_E3D 4020 // MKS Robin E3D (STM32F103RC) #define BOARD_MKS_ROBIN_E3D_V1_1 4021 // MKS Robin E3D V1.1 (STM32F103RC) #define BOARD_MKS_ROBIN_E3P 4022 // MKS Robin E3p (STM32F103VE) -#define BOARD_BTT_SKR_MINI_V1_1 4023 // BigTreeTech SKR Mini v1.1 (STM32F103RC) -#define BOARD_BTT_SKR_MINI_E3_V1_0 4024 // BigTreeTech SKR Mini E3 (STM32F103RC) -#define BOARD_BTT_SKR_MINI_E3_V1_2 4025 // BigTreeTech SKR Mini E3 V1.2 (STM32F103RC) -#define BOARD_BTT_SKR_MINI_E3_V2_0 4026 // BigTreeTech SKR Mini E3 V2.0 (STM32F103RC / STM32F103RE) -#define BOARD_BTT_SKR_MINI_E3_V3_0 4027 // BigTreeTech SKR Mini E3 V3.0 (STM32G0B1RE) -#define BOARD_BTT_SKR_MINI_E3_V3_0_1 4028 // BigTreeTech SKR Mini E3 V3.0.1 (STM32F401RC) -#define BOARD_BTT_SKR_MINI_MZ_V1_0 4029 // BigTreeTech SKR Mini MZ V1.0 (STM32F103RC) -#define BOARD_BTT_SKR_E3_DIP 4030 // BigTreeTech SKR E3 DIP V1.0 (STM32F103RC / STM32F103RE) -#define BOARD_BTT_SKR_CR6 4031 // BigTreeTech SKR CR6 v1.0 (STM32F103RE) -#define BOARD_JGAURORA_A5S_A1 4032 // JGAurora A5S A1 (STM32F103ZE) -#define BOARD_FYSETC_AIO_II 4033 // FYSETC AIO_II (STM32F103RC) -#define BOARD_FYSETC_CHEETAH 4034 // FYSETC Cheetah (STM32F103RC) -#define BOARD_FYSETC_CHEETAH_V12 4035 // FYSETC Cheetah V1.2 (STM32F103RC) -#define BOARD_LONGER3D_LK 4036 // Longer3D LK1/2 - Alfawise U20/U20+/U30 (STM32F103VE) -#define BOARD_CCROBOT_MEEB_3DP 4037 // ccrobot-online.com MEEB_3DP (STM32F103RC) -#define BOARD_CHITU3D_V5 4038 // Chitu3D TronXY X5SA V5 Board (STM32F103ZE) -#define BOARD_CHITU3D_V6 4039 // Chitu3D TronXY X5SA V6 Board (STM32F103ZE) -#define BOARD_CHITU3D_V9 4040 // Chitu3D TronXY X5SA V9 Board (STM32F103ZE) -#define BOARD_CREALITY_V4 4041 // Creality v4.x (STM32F103RC / STM32F103RE) -#define BOARD_CREALITY_V422 4042 // Creality v4.2.2 (STM32F103RC / STM32F103RE) -#define BOARD_CREALITY_V423 4043 // Creality v4.2.3 (STM32F103RC / STM32F103RE) -#define BOARD_CREALITY_V425 4044 // Creality v4.2.5 (STM32F103RC / STM32F103RE) -#define BOARD_CREALITY_V427 4045 // Creality v4.2.7 (STM32F103RC / STM32F103RE) -#define BOARD_CREALITY_V4210 4046 // Creality v4.2.10 (STM32F103RC / STM32F103RE) as found in the CR-30 -#define BOARD_CREALITY_V431 4047 // Creality v4.3.1 (STM32F103RC / STM32F103RE) -#define BOARD_CREALITY_V431_A 4048 // Creality v4.3.1a (STM32F103RC / STM32F103RE) -#define BOARD_CREALITY_V431_B 4049 // Creality v4.3.1b (STM32F103RC / STM32F103RE) -#define BOARD_CREALITY_V431_C 4050 // Creality v4.3.1c (STM32F103RC / STM32F103RE) -#define BOARD_CREALITY_V431_D 4051 // Creality v4.3.1d (STM32F103RC / STM32F103RE) -#define BOARD_CREALITY_V452 4052 // Creality v4.5.2 (STM32F103RC / STM32F103RE) -#define BOARD_CREALITY_V453 4053 // Creality v4.5.3 (STM32F103RC / STM32F103RE) -#define BOARD_CREALITY_V521 4054 // Creality v5.2.1 (STM32F103VE) as found in the SV04 -#define BOARD_CREALITY_V24S1 4055 // Creality v2.4.S1 (STM32F103RC / STM32F103RE) v101 as found in the Ender-7 -#define BOARD_CREALITY_V24S1_301 4056 // Creality v2.4.S1_301 (STM32F103RC / STM32F103RE) v301 as found in the Ender-3 S1 -#define BOARD_CREALITY_V25S1 4057 // Creality v2.5.S1 (STM32F103RE) as found in the CR-10 Smart Pro -#define BOARD_TRIGORILLA_PRO 4058 // Trigorilla Pro (STM32F103ZE) -#define BOARD_FLY_MINI 4059 // FLYmaker FLY MINI (STM32F103RC) -#define BOARD_FLSUN_HISPEED 4060 // FLSUN HiSpeedV1 (STM32F103VE) -#define BOARD_BEAST 4061 // STM32F103RE Libmaple-based controller -#define BOARD_MINGDA_MPX_ARM_MINI 4062 // STM32F103ZE Mingda MD-16 -#define BOARD_GTM32_PRO_VD 4063 // STM32F103VE controller -#define BOARD_ZONESTAR_ZM3E2 4064 // Zonestar ZM3E2 (STM32F103RC) -#define BOARD_ZONESTAR_ZM3E4 4065 // Zonestar ZM3E4 V1 (STM32F103VC) -#define BOARD_ZONESTAR_ZM3E4V2 4066 // Zonestar ZM3E4 V2 (STM32F103VC) -#define BOARD_ERYONE_ERY32_MINI 4067 // Eryone Ery32 mini (STM32F103VE) -#define BOARD_PANDA_PI_V29 4068 // Panda Pi V2.9 - Standalone (STM32F103RC) +#define BOARD_BTT_EBB42_V1_1 4023 // BigTreeTech EBB42 V1.1 (STM32G0B1CB) +#define BOARD_BTT_SKR_MINI_V1_1 4024 // BigTreeTech SKR Mini v1.1 (STM32F103RC) +#define BOARD_BTT_SKR_MINI_E3_V1_0 4025 // BigTreeTech SKR Mini E3 (STM32F103RC) +#define BOARD_BTT_SKR_MINI_E3_V1_2 4026 // BigTreeTech SKR Mini E3 V1.2 (STM32F103RC) +#define BOARD_BTT_SKR_MINI_E3_V2_0 4027 // BigTreeTech SKR Mini E3 V2.0 (STM32F103RC / STM32F103RE) +#define BOARD_BTT_SKR_MINI_E3_V3_0 4028 // BigTreeTech SKR Mini E3 V3.0 (STM32G0B1RE) +#define BOARD_BTT_SKR_MINI_E3_V3_0_1 4029 // BigTreeTech SKR Mini E3 V3.0.1 (STM32F401RC) +#define BOARD_BTT_SKR_MINI_MZ_V1_0 4030 // BigTreeTech SKR Mini MZ V1.0 (STM32F103RC) +#define BOARD_BTT_SKR_E3_DIP 4031 // BigTreeTech SKR E3 DIP V1.0 (STM32F103RC / STM32F103RE) +#define BOARD_BTT_SKR_CR6 4032 // BigTreeTech SKR CR6 v1.0 (STM32F103RE) +#define BOARD_JGAURORA_A5S_A1 4033 // JGAurora A5S A1 (STM32F103ZE) +#define BOARD_FYSETC_AIO_II 4034 // FYSETC AIO_II (STM32F103RC) +#define BOARD_FYSETC_CHEETAH 4035 // FYSETC Cheetah (STM32F103RC) +#define BOARD_FYSETC_CHEETAH_V12 4036 // FYSETC Cheetah V1.2 (STM32F103RC) +#define BOARD_LONGER3D_LK 4037 // Longer3D LK1/2 - Alfawise U20/U20+/U30 (STM32F103VE) +#define BOARD_CCROBOT_MEEB_3DP 4038 // ccrobot-online.com MEEB_3DP (STM32F103RC) +#define BOARD_CHITU3D_V5 4039 // Chitu3D TronXY X5SA V5 Board (STM32F103ZE) +#define BOARD_CHITU3D_V6 4040 // Chitu3D TronXY X5SA V6 Board (STM32F103ZE) +#define BOARD_CHITU3D_V9 4041 // Chitu3D TronXY X5SA V9 Board (STM32F103ZE) +#define BOARD_CREALITY_V4 4042 // Creality v4.x (STM32F103RC / STM32F103RE) +#define BOARD_CREALITY_V422 4043 // Creality v4.2.2 (STM32F103RC / STM32F103RE) +#define BOARD_CREALITY_V423 4044 // Creality v4.2.3 (STM32F103RC / STM32F103RE) +#define BOARD_CREALITY_V425 4045 // Creality v4.2.5 (STM32F103RC / STM32F103RE) +#define BOARD_CREALITY_V427 4046 // Creality v4.2.7 (STM32F103RC / STM32F103RE) +#define BOARD_CREALITY_V4210 4047 // Creality v4.2.10 (STM32F103RC / STM32F103RE) as found in the CR-30 +#define BOARD_CREALITY_V431 4048 // Creality v4.3.1 (STM32F103RC / STM32F103RE) +#define BOARD_CREALITY_V431_A 4049 // Creality v4.3.1a (STM32F103RC / STM32F103RE) +#define BOARD_CREALITY_V431_B 4050 // Creality v4.3.1b (STM32F103RC / STM32F103RE) +#define BOARD_CREALITY_V431_C 4051 // Creality v4.3.1c (STM32F103RC / STM32F103RE) +#define BOARD_CREALITY_V431_D 4052 // Creality v4.3.1d (STM32F103RC / STM32F103RE) +#define BOARD_CREALITY_V452 4053 // Creality v4.5.2 (STM32F103RC / STM32F103RE) +#define BOARD_CREALITY_V453 4054 // Creality v4.5.3 (STM32F103RC / STM32F103RE) +#define BOARD_CREALITY_V521 4055 // Creality v5.2.1 (STM32F103VE) as found in the SV04 +#define BOARD_CREALITY_V24S1 4056 // Creality v2.4.S1 (STM32F103RC / STM32F103RE) v101 as found in the Ender-7 +#define BOARD_CREALITY_V24S1_301 4057 // Creality v2.4.S1_301 (STM32F103RC / STM32F103RE) v301 as found in the Ender-3 S1 +#define BOARD_CREALITY_V25S1 4058 // Creality v2.5.S1 (STM32F103RE) as found in the CR-10 Smart Pro +#define BOARD_TRIGORILLA_PRO 4059 // Trigorilla Pro (STM32F103ZE) +#define BOARD_FLY_MINI 4060 // FLYmaker FLY MINI (STM32F103RC) +#define BOARD_FLSUN_HISPEED 4061 // FLSUN HiSpeedV1 (STM32F103VE) +#define BOARD_BEAST 4062 // STM32F103RE Libmaple-based controller +#define BOARD_MINGDA_MPX_ARM_MINI 4063 // STM32F103ZE Mingda MD-16 +#define BOARD_GTM32_PRO_VD 4064 // STM32F103VE controller +#define BOARD_ZONESTAR_ZM3E2 4065 // Zonestar ZM3E2 (STM32F103RC) +#define BOARD_ZONESTAR_ZM3E4 4066 // Zonestar ZM3E4 V1 (STM32F103VC) +#define BOARD_ZONESTAR_ZM3E4V2 4067 // Zonestar ZM3E4 V2 (STM32F103VC) +#define BOARD_ERYONE_ERY32_MINI 4068 // Eryone Ery32 mini (STM32F103VE) +#define BOARD_PANDA_PI_V29 4069 // Panda Pi V2.9 - Standalone (STM32F103RC) // // ARM Cortex-M4F diff --git a/Marlin/src/feature/controllerfan.cpp b/Marlin/src/feature/controllerfan.cpp index cc22c642bd..6e5278ce74 100644 --- a/Marlin/src/feature/controllerfan.cpp +++ b/Marlin/src/feature/controllerfan.cpp @@ -104,7 +104,7 @@ void ControllerFan::update() { hal.set_pwm_duty(pin_t(CONTROLLER_FAN2_PIN), speed); else WRITE(CONTROLLER_FAN2_PIN, speed > 0); - #endif + #endif #endif } } diff --git a/Marlin/src/pins/pins.h b/Marlin/src/pins/pins.h index 39a2b7f8a2..9748571150 100644 --- a/Marlin/src/pins/pins.h +++ b/Marlin/src/pins/pins.h @@ -533,6 +533,8 @@ #include "stm32f1/pins_MKS_ROBIN_E3D_V1_1.h" // STM32F1 env:mks_robin_e3 #elif MB(MKS_ROBIN_E3P) #include "stm32f1/pins_MKS_ROBIN_E3P.h" // STM32F1 env:mks_robin_e3p env:mks_robin_e3p_maple +#elif MB(BTT_EBB42_V1_1) + #include "stm32g0/pins_BTT_EBB42_V1_1.h" // STM32G0 env:BTT_EBB42_V1_1_filament_extruder #elif MB(BTT_SKR_MINI_V1_1) #include "stm32f1/pins_BTT_SKR_MINI_V1_1.h" // STM32F1 env:STM32F103RC_btt env:STM32F103RC_btt_USB env:STM32F103RC_btt_maple env:STM32F103RC_btt_USB_maple #elif MB(BTT_SKR_MINI_E3_V1_0) diff --git a/Marlin/src/pins/stm32g0/pins_BTT_EBB42_V1_1.h b/Marlin/src/pins/stm32g0/pins_BTT_EBB42_V1_1.h new file mode 100644 index 0000000000..fc2be5401e --- /dev/null +++ b/Marlin/src/pins/stm32g0/pins_BTT_EBB42_V1_1.h @@ -0,0 +1,153 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2022 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +/** CAUTION ** + * This board definition is to facilitate support for a Filament Extrusion + * devices, used to convert waste plastic into 3D printable filament. + * This board is NOT a general 3D printing controller; it is NOT supported + * as a toolboard via CANBUS (as it was originally designed) or any device + * that requires kinematics. + */ + +#ifndef BOARD_INFO_NAME + #define BOARD_INFO_NAME "BTT EBB42 V1.1" +#endif + +// +// EEPROM +// +#if EITHER(NO_EEPROM_SELECTED, FLASH_EEPROM_EMULATION) + #undef NO_EEPROM_SELECTED + #ifndef FLASH_EEPROM_EMULATION + #define FLASH_EEPROM_EMULATION + #endif + #define EEPROM_PAGE_SIZE (0x800UL) // 2K + #define EEPROM_START_ADDRESS (0x0801F800UL) + #define MARLIN_EEPROM_SIZE EEPROM_PAGE_SIZE +#endif + +//#define USES_DIAG_JUMPERS + +// Ignore temp readings during development. +//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000 + +#define LED_PIN PA13 + +#define I2C_SDA_PIN PB4 +#define I2C_SCL_PIN PB3 + +// +// Servos +// +#define SERVO0_PIN PB9 // SERVOS + +// +// Limit Switches +// +#if !HAS_WIRED_LCD + #define X_STOP_PIN PB6 + #define Y_STOP_PIN PB5 + #define Z_STOP_PIN PB7 +#endif + +// +// Z Probe must be this pin +// +#define Z_MIN_PROBE_PIN PB8 // PROBE + +// +// Steppers +// +#define X_ENABLE_PIN -1 +#define X_STEP_PIN PA10 // Unused. Assigned so Marlin will compile +#define X_DIR_PIN -1 + +#define Y_ENABLE_PIN -1 +#define Y_STEP_PIN PA10 // Unused. Assigned so Marlin will compile +#define Y_DIR_PIN -1 + +#define Z_ENABLE_PIN -1 +#define Z_STEP_PIN PA10 // Unused. Assigned so Marlin will compile +#define Z_DIR_PIN -1 + +#define E0_ENABLE_PIN PD2 +#define E0_STEP_PIN PD0 +#define E0_DIR_PIN PD1 + +#if HAS_TMC_UART + /** + * TMC220x stepper drivers + * Hardware serial communication ports + */ + //#define E0_HARDWARE_SERIAL MSerial4 + + // This is the stable default value after testing, but, higher UART rates could be configured, remeber to test the Steppers with the M122 command to check if everything works. + //#define TMC_BAUD_RATE 250000 + + #define E0_SERIAL_TX_PIN PA15 + #define E0_SERIAL_RX_PIN E0_SERIAL_TX_PIN + + // Reduce baud rate to improve software serial reliability + #define TMC_BAUD_RATE 19200 + + // Default TMC slave addresses + #ifndef E0_SLAVE_ADDRESS + #define E0_SLAVE_ADDRESS 0b00 + #endif +#endif + +// +// Temperature Sensors +// +#define TEMP_0_PIN PA3 // Analog Input "TH0" + +// SPI for MAX Thermocouple +// Uses a separate SPI bus + +#define TEMP_0_CS_PIN PA4 // GTR K-TEMP +#define TEMP_0_SCK_PIN PA5 // SCK +#define TEMP_0_MISO_PIN PA6 // MISO +#define TEMP_0_MOSI_PIN PA7 // For MAX31865 + +// +// Heaters / Fans +// +#define HEATER_0_PIN PA2 // "HE" +#define FAN_PIN PA0 // "FAN0" +#define FAN1_PIN PA1 // "FAN1" + +// +// Default NEOPIXEL_PIN +// +#ifndef NEOPIXEL_PIN + #define NEOPIXEL_PIN PD3 // LED driving pin +#endif + +// +// LCD / Controller +// +#if HAS_WIRED_LCD + #define BTN_EN1 PB7 + #define BTN_EN2 PB5 + #define BTN_ENC PB6 +#endif diff --git a/buildroot/share/PlatformIO/boards/marlin_BTT_EBB42_V1_1.json b/buildroot/share/PlatformIO/boards/marlin_BTT_EBB42_V1_1.json new file mode 100644 index 0000000000..51b6b9984e --- /dev/null +++ b/buildroot/share/PlatformIO/boards/marlin_BTT_EBB42_V1_1.json @@ -0,0 +1,47 @@ +{ + "build": { + "core": "stm32", + "cpu": "cortex-m0plus", + "extra_flags": "-DSTM32G0xx -DSTM32G0B1xx", + "f_cpu": "64000000L", + "framework_extra_flags": { + "arduino": "-D__CORTEX_SC=0" + }, + "mcu": "stm32g0b1cbt6", + "product_line": "STM32G0B1xx", + "variant": "MARLIN_BTT_EBB42_V1_1" + }, + "debug": { + "default_tools": [ + "stlink" + ], + "jlink_device": "STM32G0B1CB", + "onboard_tools": [ + "stlink" + ], + "openocd_target": "stm32g0x", + "svd_path": "STM32G0B1.svd" + }, + "frameworks": [ + "arduino", + "cmsis", + "libopencm3", + "stm32cube", + "zephyr" + ], + "name": "STM32G0B1CB", + "upload": { + "maximum_ram_size": 147456, + "maximum_size": 131072, + "protocol": "stlink", + "protocols": [ + "stlink", + "jlink", + "cmsis-dap", + "blackmagic", + "mbed" + ] + }, + "url": "https://www.st.com/content/st_com/en/products/microcontrollers-microprocessors/stm32-32-bit-arm-cortex-mcus/stm32-mainstream-mcus/stm32g0-series/stm32g0x1.html", + "vendor": "ST" +} diff --git a/buildroot/share/PlatformIO/variants/MARLIN_BTT_EBB42_V1_1/PeripheralPins.c b/buildroot/share/PlatformIO/variants/MARLIN_BTT_EBB42_V1_1/PeripheralPins.c new file mode 100644 index 0000000000..a8a98fc6c5 --- /dev/null +++ b/buildroot/share/PlatformIO/variants/MARLIN_BTT_EBB42_V1_1/PeripheralPins.c @@ -0,0 +1,377 @@ +/* + ******************************************************************************* + * Copyright (c) 2020, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +/* + * Automatically generated from STM32G0B1C(B-C-E)Tx.xml, STM32G0B1C(B-C-E)Ux.xml + * STM32G0C1C(C-E)Tx.xml, STM32G0C1C(C-E)Ux.xml + * CubeMX DB release 6.0.60 + */ +#if !defined(CUSTOM_PERIPHERAL_PINS) +#include "Arduino.h" +#include "PeripheralPins.h" + +/* ===== + * Notes: + * - The pins mentioned Px_y_ALTz are alternative possibilities which use other + * HW peripheral instances. You can use them the same way as any other "normal" + * pin (i.e. analogWrite(PA7_ALT1, 128);). + * + * - Commented lines are alternative possibilities which are not used per default. + * If you change them, you will have to know what you do + * ===== + */ + +//*** ADC *** + +#ifdef HAL_ADC_MODULE_ENABLED +WEAK const PinMap PinMap_ADC[] = { + {PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC1_IN0 + {PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1 + {PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2 + {PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_IN3 + {PA_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_IN4 + {PA_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC1_IN5 + {PA_6, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC1_IN6 + {PA_7, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC1_IN7 + {PB_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_IN8 + {PB_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC1_IN9 + {PB_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC1_IN10 + {PB_10, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC1_IN11 + {PB_11, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC1_IN15 + {PB_12, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 16, 0)}, // ADC1_IN16 + {NC, NP, 0} +}; +#endif + +//*** DAC *** + +#ifdef HAL_DAC_MODULE_ENABLED +WEAK const PinMap PinMap_DAC[] = { + {PA_4, DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // DAC1_OUT1 + {PA_5, DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // DAC1_OUT2 + {NC, NP, 0} +}; +#endif + +//*** I2C *** + +#ifdef HAL_I2C_MODULE_ENABLED +WEAK const PinMap PinMap_I2C_SDA[] = { + {PA_6, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF8_I2C2)}, + {PA_6_ALT1, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C3)}, + {PA_10, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C1)}, + {PA_10_ALT1, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF8_I2C2)}, + {PA_10_R, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C1)}, + {PA_10_R_ALT1, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF8_I2C2)}, + {PA_12, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C2)}, + {PB_4, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF8_I2C2)}, + {PB_4_ALT1, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C3)}, + {PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C1)}, + {PB_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C1)}, + {PB_11, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C2)}, + {PB_14, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C2)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_I2C_MODULE_ENABLED +WEAK const PinMap PinMap_I2C_SCL[] = { + {PA_7, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF8_I2C2)}, + {PA_7_ALT1, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C3)}, + {PA_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C1)}, + {PA_9_ALT1, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF8_I2C2)}, + {PA_9_R, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C1)}, + {PA_9_R_ALT1, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF8_I2C2)}, + {PA_11, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C2)}, + {PB_3, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF8_I2C2)}, + {PB_3_ALT1, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C3)}, + {PB_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C1)}, + {PB_8, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C1)}, + {PB_10, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C2)}, + {PB_13, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C2)}, + {NC, NP, 0} +}; +#endif + +//*** TIM *** + +#ifdef HAL_TIM_MODULE_ENABLED +WEAK const PinMap PinMap_TIM[] = { + {PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 1, 0)}, // TIM2_CH1 + {PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 2, 0)}, // TIM2_CH2 + {PA_1_ALT1, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM15, 1, 1)}, // TIM15_CH1N + {PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 3, 0)}, // TIM2_CH3 + {PA_2_ALT1, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM15, 1, 0)}, // TIM15_CH1 + {PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 4, 0)}, // TIM2_CH4 + {PA_3_ALT1, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM15, 2, 0)}, // TIM15_CH2 + {PA_4, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14, 1, 0)}, // TIM14_CH1 + {PA_5, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 1, 0)}, // TIM2_CH1 + {PA_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 1, 0)}, // TIM3_CH1 + {PA_6_ALT1, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM16, 1, 0)}, // TIM16_CH1 + {PA_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 1)}, // TIM1_CH1N + {PA_7_ALT1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 2, 0)}, // TIM3_CH2 + {PA_7_ALT2, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14, 1, 0)}, // TIM14_CH1 + {PA_7_ALT3, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM17, 1, 0)}, // TIM17_CH1 + {PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 0)}, // TIM1_CH1 + {PA_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 0)}, // TIM1_CH2 + {PA_9_R, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 0)}, // TIM1_CH2 + {PA_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 0)}, // TIM1_CH3 + {PA_10_R, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 0)}, // TIM1_CH3 + {PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 4, 0)}, // TIM1_CH4 + {PA_15, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 1, 0)}, // TIM2_CH1 + {PB_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 1)}, // TIM1_CH2N + {PB_0_ALT1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 3, 0)}, // TIM3_CH3 + {PB_1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 1)}, // TIM1_CH3N + {PB_1_ALT1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 4, 0)}, // TIM3_CH4 + {PB_1_ALT2, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM14, 1, 0)}, // TIM14_CH1 + {PB_3, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2 + {PB_3_ALT1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 2, 0)}, // TIM2_CH2 + {PB_4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 1, 0)}, // TIM3_CH1 + {PB_5, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 2, 0)}, // TIM3_CH2 + {PB_6, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3 + {PB_6_ALT1, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM4, 1, 0)}, // TIM4_CH1 + {PB_6_ALT2, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 1)}, // TIM16_CH1N + {PB_7, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM4, 2, 0)}, // TIM4_CH2 + {PB_7_ALT1, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM17, 1, 1)}, // TIM17_CH1N + {PB_8, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM4, 3, 0)}, // TIM4_CH3 + {PB_8_ALT1, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 0)}, // TIM16_CH1 + {PB_9, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM4, 4, 0)}, // TIM4_CH4 + {PB_9_ALT1, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM17, 1, 0)}, // TIM17_CH1 + {PB_10, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 3, 0)}, // TIM2_CH3 + {PB_11, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 4, 0)}, // TIM2_CH4 + {PB_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 1)}, // TIM1_CH1N + {PB_13_ALT1, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM15, 1, 1)}, // TIM15_CH1N + {PB_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 1)}, // TIM1_CH2N + {PB_14_ALT1, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM15, 1, 0)}, // TIM15_CH1 + {PB_15, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 1)}, // TIM1_CH3N + {PB_15_ALT1, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM15, 1, 1)}, // TIM15_CH1N + {PB_15_ALT2, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM15, 2, 0)}, // TIM15_CH2 + {PC_6, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 3, 0)}, // TIM2_CH3 + {PC_6_ALT1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 1, 0)}, // TIM3_CH1 + {PC_7, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 4, 0)}, // TIM2_CH4 + {PC_7_ALT1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 2, 0)}, // TIM3_CH2 + {PD_0, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 0)}, // TIM16_CH1 + {PD_1, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM17, 1, 0)}, // TIM17_CH1 + {PD_2, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 1)}, // TIM1_CH1N + {PD_3, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 1)}, // TIM1_CH2N + {PF_0, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM14, 1, 0)}, // TIM14_CH1 + {PF_1, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM15, 1, 1)}, // TIM15_CH1N + {NC, NP, 0} +}; +#endif + +//*** UART *** + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_TX[] = { + {PA_0, USART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART4)}, + {PA_2, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_LPUART1)}, + {PA_2_ALT1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PA_4, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_USART6)}, + {PA_5, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)}, + {PA_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PA_9_R, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PA_14, LPUART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_LPUART2)}, + {PA_14_ALT1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PB_0, USART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART5)}, + {PB_2, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)}, + {PB_3, USART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_USART5)}, + {PB_6, LPUART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_LPUART2)}, + {PB_6_ALT1, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)}, + {PB_8, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)}, + {PB_8_ALT1, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)}, + {PB_10, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)}, + {PB_11, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_LPUART1)}, + {PC_6, LPUART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_LPUART2)}, + {PD_3, USART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_USART5)}, + {PF_2, LPUART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_LPUART2)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_RX[] = { + {PA_1, USART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART4)}, + {PA_3, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_LPUART1)}, + {PA_3_ALT1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PA_5, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_USART6)}, + {PA_10, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PA_10_R, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PA_13, LPUART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_LPUART2)}, + {PA_15, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PB_0, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)}, + {PB_1, USART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART5)}, + {PB_4, USART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_USART5)}, + {PB_7, LPUART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_LPUART2)}, + {PB_7_ALT1, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)}, + {PB_9, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)}, + {PB_9_ALT1, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)}, + {PB_10, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_LPUART1)}, + {PB_11, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)}, + {PC_7, LPUART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_LPUART2)}, + {PD_2, USART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_USART5)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_RTS[] = { + {PA_1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PA_7, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_USART6)}, + {PA_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PA_15, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_USART3)}, + {PA_15_ALT1, USART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART4)}, + {PB_1, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_LPUART1)}, + {PB_1_ALT1, LPUART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_LPUART2)}, + {PB_1_ALT2, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)}, + {PB_3, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART1)}, + {PB_5, USART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART5)}, + {PB_12, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_LPUART1)}, + {PB_14, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)}, + {PB_14_ALT1, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)}, + {PD_2, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART3)}, + {PF_2, LPUART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_LPUART2)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_CTS[] = { + {PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PA_6, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_LPUART1)}, + {PA_6_ALT1, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)}, + {PA_6_ALT2, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_USART6)}, + {PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PB_0, LPUART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_LPUART2)}, + {PB_4, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART1)}, + {PB_6, USART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART5)}, + {PB_7, USART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART4)}, + {PB_13, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_LPUART1)}, + {PB_13_ALT1, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)}, + {PB_15, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)}, + {PD_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART2)}, + {NC, NP, 0} +}; +#endif + +//*** SPI *** + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_MOSI[] = { + {PA_2, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PA_4, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_SPI2)}, + {PA_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PA_10, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, + {PA_10_R, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, + {PA_12, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_5_ALT1, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_SPI3)}, + {PB_7, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_SPI2)}, + {PB_11, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, + {PB_15, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_MISO[] = { + {PA_3, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, + {PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PA_9, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_SPI2)}, + {PA_9_R, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_SPI2)}, + {PA_11, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_2, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_SPI2)}, + {PB_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_4_ALT1, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_SPI3)}, + {PB_6, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_SPI2)}, + {PB_14, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, + {PD_3, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_SPI2)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_SCLK[] = { + {PA_0, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, + {PA_1, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_3, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_3_ALT1, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_SPI3)}, + {PB_8, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_SPI2)}, + {PB_10, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, + {PB_13, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, + {PD_1, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_SPI2)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_SSEL[] = { + {PA_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PA_4_ALT1, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_SPI3)}, + {PA_8, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_SPI2)}, + {PA_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PA_15_ALT1, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_SPI3)}, + {PB_0, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_9, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, + {PB_12, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, + {PD_0, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_SPI2)}, + {NC, NP, 0} +}; +#endif + +//*** FDCAN *** + +#ifdef HAL_FDCAN_MODULE_ENABLED +WEAK const PinMap PinMap_CAN_RD[] = { + {PA_11, FDCAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF3_FDCAN1)}, + {PB_0, FDCAN2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF3_FDCAN2)}, + {PB_5, FDCAN2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF3_FDCAN2)}, + {PB_8, FDCAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF3_FDCAN1)}, + {PB_12, FDCAN2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF3_FDCAN2)}, + {PD_0, FDCAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF3_FDCAN1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_FDCAN_MODULE_ENABLED +WEAK const PinMap PinMap_CAN_TD[] = { + {PA_12, FDCAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF3_FDCAN1)}, + {PB_1, FDCAN2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF3_FDCAN2)}, + {PB_6, FDCAN2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF3_FDCAN2)}, + {PB_9, FDCAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF3_FDCAN1)}, + {PB_13, FDCAN2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF3_FDCAN2)}, + {PD_1, FDCAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF3_FDCAN1)}, + {NC, NP, 0} +}; +#endif + +//*** No ETHERNET *** + +//*** No QUADSPI *** + +//*** USB *** + +#if defined(HAL_PCD_MODULE_ENABLED) || defined(HAL_HCD_MODULE_ENABLED) +WEAK const PinMap PinMap_USB_DRD_FS[] = { + {PA_4, USB_DRD_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_USB)}, // USB_NOE + {PA_11, USB_DRD_FS, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF_NONE)}, // USB_DM + {PA_12, USB_DRD_FS, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF_NONE)}, // USB_DP + {PA_13, USB_DRD_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_USB)}, // USB_NOE + {PA_15, USB_DRD_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_USB)}, // USB_NOE + {NC, NP, 0} +}; +#endif + +//*** No SD *** + +#endif /* !CUSTOM_PERIPHERAL_PINS */ diff --git a/buildroot/share/PlatformIO/variants/MARLIN_BTT_EBB42_V1_1/PinNamesVar.h b/buildroot/share/PlatformIO/variants/MARLIN_BTT_EBB42_V1_1/PinNamesVar.h new file mode 100644 index 0000000000..4e91fa322c --- /dev/null +++ b/buildroot/share/PlatformIO/variants/MARLIN_BTT_EBB42_V1_1/PinNamesVar.h @@ -0,0 +1,78 @@ +/* Remap pin name */ +PA_9_R = PA_9 | PREMAP, +PA_10_R = PA_10 | PREMAP, + +/* Alternate pin name */ +PA_1_ALT1 = PA_1 | ALT1, +PA_2_ALT1 = PA_2 | ALT1, +PA_3_ALT1 = PA_3 | ALT1, +PA_4_ALT1 = PA_4 | ALT1, +PA_6_ALT1 = PA_6 | ALT1, +PA_6_ALT2 = PA_6 | ALT2, +PA_7_ALT1 = PA_7 | ALT1, +PA_7_ALT2 = PA_7 | ALT2, +PA_7_ALT3 = PA_7 | ALT3, +PA_9_ALT1 = PA_9 | ALT1, +PA_9_R_ALT1 = PA_9_R | ALT1, +PA_10_ALT1 = PA_10 | ALT1, +PA_10_R_ALT1 = PA_10_R | ALT1, +PA_14_ALT1 = PA_14 | ALT1, +PA_15_ALT1 = PA_15 | ALT1, +PB_0_ALT1 = PB_0 | ALT1, +PB_1_ALT1 = PB_1 | ALT1, +PB_1_ALT2 = PB_1 | ALT2, +PB_3_ALT1 = PB_3 | ALT1, +PB_4_ALT1 = PB_4 | ALT1, +PB_5_ALT1 = PB_5 | ALT1, +PB_6_ALT1 = PB_6 | ALT1, +PB_6_ALT2 = PB_6 | ALT2, +PB_7_ALT1 = PB_7 | ALT1, +PB_8_ALT1 = PB_8 | ALT1, +PB_9_ALT1 = PB_9 | ALT1, +PB_13_ALT1 = PB_13 | ALT1, +PB_14_ALT1 = PB_14 | ALT1, +PB_15_ALT1 = PB_15 | ALT1, +PB_15_ALT2 = PB_15 | ALT2, +PC_6_ALT1 = PC_6 | ALT1, +PC_7_ALT1 = PC_7 | ALT1, + +/* SYS_WKUP */ +#ifdef PWR_WAKEUP_PIN1 + SYS_WKUP1 = PA_0, +#endif +#ifdef PWR_WAKEUP_PIN2 + SYS_WKUP2 = PC_13, +#endif +#ifdef PWR_WAKEUP_PIN3 + SYS_WKUP3 = NC, +#endif +#ifdef PWR_WAKEUP_PIN4 + SYS_WKUP4 = PA_2, +#endif +#ifdef PWR_WAKEUP_PIN5 + SYS_WKUP5 = NC, +#endif +#ifdef PWR_WAKEUP_PIN6 + SYS_WKUP6 = PB_5, +#endif +#ifdef PWR_WAKEUP_PIN7 + SYS_WKUP7 = NC, +#endif +#ifdef PWR_WAKEUP_PIN8 + SYS_WKUP8 = NC, +#endif + +/* USB */ +#ifdef USBCON + USB_DM = PA_11, + USB_DP = PA_12, + #ifdef USB_NOE_PA_4 + USB_NOE = PA_4, + #endif + #ifdef USB_NOE_PA_13 + USB_NOE = PA_13, + #endif + #ifdef USB_NOE_PA_15 + USB_NOE = PA_15, + #endif +#endif diff --git a/buildroot/share/PlatformIO/variants/MARLIN_BTT_EBB42_V1_1/ldscript.ld b/buildroot/share/PlatformIO/variants/MARLIN_BTT_EBB42_V1_1/ldscript.ld new file mode 100644 index 0000000000..ce97a9f4ae --- /dev/null +++ b/buildroot/share/PlatformIO/variants/MARLIN_BTT_EBB42_V1_1/ldscript.ld @@ -0,0 +1,185 @@ +/* +****************************************************************************** +** +** @file : LinkerScript.ld +** +** @author : Auto-generated by STM32CubeIDE +** +** @brief : Linker script for STM32G0B1CBTx Device from STM32G0 series +** 128Kbytes FLASH +** 144Kbytes RAM +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used +** +** Target : STMicroelectronics STM32 +** +** Distribution: The file is distributed as is, without any warranty +** of any kind. +** +****************************************************************************** +** @attention +** +** Copyright (c) 2022 STMicroelectronics. +** All rights reserved. +** +** This software is licensed under terms that can be found in the LICENSE file +** in the root directory of this software component. +** If no LICENSE file comes with this software, it is provided AS-IS. +** +****************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = ORIGIN(RAM) + LENGTH(RAM); /* end of "RAM" Ram type memory */ + +_Min_Heap_Size = 0x200; /* required amount of heap */ +_Min_Stack_Size = 0x400; /* required amount of stack */ + +/* Memories definition */ +MEMORY +{ + RAM (xrw) : ORIGIN = 0x20000000, LENGTH = LD_MAX_DATA_SIZE + FLASH (rx) : ORIGIN = 0x8000000 + LD_FLASH_OFFSET, LENGTH = LD_MAX_SIZE - LD_FLASH_OFFSET +} + +/* Sections */ +SECTIONS +{ + /* The startup code into "FLASH" Rom type memory */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data into "FLASH" Rom type memory */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data into "FLASH" Rom type memory */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >FLASH + + .ARM.extab : { + . = ALIGN(4); + *(.ARM.extab* .gnu.linkonce.armextab.*) + . = ALIGN(4); + } >FLASH + + .ARM : { + . = ALIGN(4); + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + . = ALIGN(4); + } >FLASH + + .preinit_array : + { + . = ALIGN(4); + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + . = ALIGN(4); + } >FLASH + + .init_array : + { + . = ALIGN(4); + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + . = ALIGN(4); + } >FLASH + + .fini_array : + { + . = ALIGN(4); + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + . = ALIGN(4); + } >FLASH + + /* Used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections into "RAM" Ram type memory */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + *(.RamFunc) /* .RamFunc sections */ + *(.RamFunc*) /* .RamFunc* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + + } >RAM AT> FLASH + + /* Uninitialized data section into "RAM" Ram type memory */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss section */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough "RAM" Ram type memory left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM + + /* Remove information from the compiler libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} diff --git a/buildroot/share/PlatformIO/variants/MARLIN_BTT_EBB42_V1_1/variant_MARLIN_BTT_EBB42_V1_1.cpp b/buildroot/share/PlatformIO/variants/MARLIN_BTT_EBB42_V1_1/variant_MARLIN_BTT_EBB42_V1_1.cpp new file mode 100644 index 0000000000..3bb5f755b7 --- /dev/null +++ b/buildroot/share/PlatformIO/variants/MARLIN_BTT_EBB42_V1_1/variant_MARLIN_BTT_EBB42_V1_1.cpp @@ -0,0 +1,138 @@ +/* + ******************************************************************************* + * Copyright (c) 2021, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ + +//#if defined(ARDUINO_EBB42_V1_1) +#include "pins_arduino.h" + +// Pin number +const PinName digitalPin[] = { + PA_0, // D0/A0 + PA_1, // D1/A1 + PA_2, // D2/A2 + PA_3, // D3/A3 + PA_4, // D4/A4 + PA_5, // D5/A5 + PA_6, // D6/A6 + PA_7, // D7/A7 + PA_8, // D8 + PA_9, // D9 + PA_10, // D10 + PA_11, // D11 + PA_12, // D12 + PA_13, // D13 + PA_14, // D14 + PA_15, // D15 + PB_0, // D16/A8 + PB_1, // D17/A9 + PB_2, // D18/A10 + PB_3, // D19 + PB_4, // D20 + PB_5, // D21 + PB_6, // D22 + PB_7, // D23 + PB_8, // D24 + PB_9, // D25 + PB_10, // D26/A11 + PB_11, // D27/A12 + PB_12, // D28/A13 + PB_13, // D29 + PB_14, // D30 + PB_15, // D31 + PC_6, // D32 + PC_7, // D33 + PC_13, // D34 + PC_14, // D35 + PC_15, // D36 + PD_0, // D37 + PD_1, // D38 + PD_2, // D39 + PD_3, // D40 + PF_0, // D41 + PF_1, // D42 + PF_2, // D43 + PA_9_R, // D44 + PA_10_R // D45 +}; + +// Analog (Ax) pin number array +const uint32_t analogInputPin[] = { + 0, // A0, PA0 + 1, // A1, PA1 + 2, // A2, PA2 + 3, // A3, PA3 + 4, // A4, PA4 + 5, // A5, PA5 + 6, // A6, PA6 + 7, // A7, PA7 + 16, // A8, PB0 + 17, // A9, PB1 + 18, // A10, PB2 + 26, // A11, PB10 + 27, // A12, PB11 + 28 // A13, PB12 +}; + +// ---------------------------------------------------------------------------- + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * @brief System Clock Configuration + * @param None + * @retval None + */ +WEAK void SystemClock_Config(void) +{ + RCC_OscInitTypeDef RCC_OscInitStruct = {}; + RCC_ClkInitTypeDef RCC_ClkInitStruct = {}; + + /** Configure the main internal regulator output voltage + */ + HAL_PWREx_ControlVoltageScaling(PWR_REGULATOR_VOLTAGE_SCALE1); + + /** Initializes the RCC Oscillators according to the specified parameters + * in the RCC_OscInitTypeDef structure. + */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI48; + RCC_OscInitStruct.HSEState = RCC_HSE_ON; + RCC_OscInitStruct.HSI48State = RCC_HSI48_ON; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; + RCC_OscInitStruct.PLL.PLLM = RCC_PLLM_DIV1; + RCC_OscInitStruct.PLL.PLLN = 16; + RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2; + RCC_OscInitStruct.PLL.PLLQ = RCC_PLLQ_DIV2; + RCC_OscInitStruct.PLL.PLLR = RCC_PLLR_DIV2; + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) { + Error_Handler(); + } + + /** Initializes the CPU, AHB and APB buses clocks + */ + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK + | RCC_CLOCKTYPE_PCLK1; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; + + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK) { + Error_Handler(); + } +} + +#ifdef __cplusplus +} +#endif +//#endif /* ARDUINO_EBB42_V1_1 */ diff --git a/buildroot/share/PlatformIO/variants/MARLIN_BTT_EBB42_V1_1/variant_MARLIN_BTT_EBB42_V1_1.h b/buildroot/share/PlatformIO/variants/MARLIN_BTT_EBB42_V1_1/variant_MARLIN_BTT_EBB42_V1_1.h new file mode 100644 index 0000000000..ff75bc1e48 --- /dev/null +++ b/buildroot/share/PlatformIO/variants/MARLIN_BTT_EBB42_V1_1/variant_MARLIN_BTT_EBB42_V1_1.h @@ -0,0 +1,198 @@ +/* + ******************************************************************************* + * Copyright (c) 2020, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +#pragma once + +/*---------------------------------------------------------------------------- + * STM32 pins number + *----------------------------------------------------------------------------*/ +#define PA0 PIN_A0 +#define PA1 PIN_A1 +#define PA2 PIN_A2 +#define PA3 PIN_A3 +#define PA4 PIN_A4 +#define PA5 PIN_A5 +#define PA6 PIN_A6 +#define PA7 PIN_A7 +#define PA8 8 +#define PA9 9 +#define PA10 10 +#define PA11 11 +#define PA12 12 +#define PA13 13 +#define PA14 14 +#define PA15 15 +#define PB0 PIN_A8 +#define PB1 PIN_A9 +#define PB2 PIN_A10 +#define PB3 19 +#define PB4 20 +#define PB5 21 +#define PB6 22 +#define PB7 23 +#define PB8 24 +#define PB9 25 +#define PB10 PIN_A11 +#define PB11 PIN_A12 +#define PB12 PIN_A13 +#define PB13 29 +#define PB14 30 +#define PB15 31 +#define PC6 32 +#define PC7 33 +#define PC13 34 +#define PC14 35 +#define PC15 36 +#define PD0 37 +#define PD1 38 +#define PD2 39 +#define PD3 40 +#define PF0 41 +#define PF1 42 +#define PF2 43 +#define PA9_R 44 +#define PA10_R 45 + +// Alternate pins number +#define PA1_ALT1 (PA1 | ALT1) +#define PA2_ALT1 (PA2 | ALT1) +#define PA3_ALT1 (PA3 | ALT1) +#define PA4_ALT1 (PA4 | ALT1) +#define PA6_ALT1 (PA6 | ALT1) +#define PA6_ALT2 (PA6 | ALT2) +#define PA7_ALT1 (PA7 | ALT1) +#define PA7_ALT2 (PA7 | ALT2) +#define PA7_ALT3 (PA7 | ALT3) +#define PA9_ALT1 (PA9 | ALT1) +#define PA9_R_ALT1 (PA9_R | ALT1) +#define PA10_ALT1 (PA10 | ALT1) +#define PA10_R_ALT1 (PA10_R | ALT1) +#define PA14_ALT1 (PA14 | ALT1) +#define PA15_ALT1 (PA15 | ALT1) +#define PB0_ALT1 (PB0 | ALT1) +#define PB1_ALT1 (PB1 | ALT1) +#define PB1_ALT2 (PB1 | ALT2) +#define PB3_ALT1 (PB3 | ALT1) +#define PB4_ALT1 (PB4 | ALT1) +#define PB5_ALT1 (PB5 | ALT1) +#define PB6_ALT1 (PB6 | ALT1) +#define PB6_ALT2 (PB6 | ALT2) +#define PB7_ALT1 (PB7 | ALT1) +#define PB8_ALT1 (PB8 | ALT1) +#define PB9_ALT1 (PB9 | ALT1) +#define PB13_ALT1 (PB13 | ALT1) +#define PB14_ALT1 (PB14 | ALT1) +#define PB15_ALT1 (PB15 | ALT1) +#define PB15_ALT2 (PB15 | ALT2) +#define PC6_ALT1 (PC6 | ALT1) +#define PC7_ALT1 (PC7 | ALT1) + +#define NUM_DIGITAL_PINS 46 +#define NUM_REMAP_PINS 2 +#define NUM_ANALOG_INPUTS 14 + +// On-board LED pin number +#ifndef LED_BUILTIN + #define LED_BUILTIN PNUM_NOT_DEFINED +#endif + +// On-board user button +#ifndef USER_BTN + #define USER_BTN PNUM_NOT_DEFINED +#endif + +// SPI definitions +#ifndef PIN_SPI_SS + #define PIN_SPI_SS PA4 +#endif +#ifndef PIN_SPI_SS1 + #define PIN_SPI_SS1 PA15 +#endif +#ifndef PIN_SPI_SS2 + #define PIN_SPI_SS2 PB0 +#endif +#ifndef PIN_SPI_SS3 + #define PIN_SPI_SS3 PNUM_NOT_DEFINED +#endif +#ifndef PIN_SPI_MOSI + #define PIN_SPI_MOSI PA2 +#endif +#ifndef PIN_SPI_MISO + #define PIN_SPI_MISO PA6 +#endif +#ifndef PIN_SPI_SCK + #define PIN_SPI_SCK PA1 +#endif + +// I2C definitions +#ifndef PIN_WIRE_SDA + #define PIN_WIRE_SDA PA6 +#endif +#ifndef PIN_WIRE_SCL + #define PIN_WIRE_SCL PA7 +#endif + +// Timer Definitions +// Use TIM6/TIM7 when possible as servo and tone don't need GPIO output pin +#ifndef TIMER_TONE + #define TIMER_TONE TIM6 +#endif +#ifndef TIMER_SERVO + #define TIMER_SERVO TIM7 +#endif + +// UART Definitions +#ifndef SERIAL_UART_INSTANCE + #define SERIAL_UART_INSTANCE 4 +#endif + +// Default pin used for generic 'Serial' instance +// Mandatory for Firmata +#ifndef PIN_SERIAL_RX + #define PIN_SERIAL_RX PA1 +#endif +#ifndef PIN_SERIAL_TX + #define PIN_SERIAL_TX PA0 +#endif + +// Extra HAL modules +#if !defined(HAL_DAC_MODULE_DISABLED) + #define HAL_DAC_MODULE_ENABLED +#endif + +/*---------------------------------------------------------------------------- + * Arduino objects - C++ only + *----------------------------------------------------------------------------*/ + +#ifdef __cplusplus + // These serial port names are intended to allow libraries and architecture-neutral + // sketches to automatically default to the correct port name for a particular type + // of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, + // the first hardware serial port whose RX/TX pins are not dedicated to another use. + // + // SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor + // + // SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial + // + // SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library + // + // SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. + // + // SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX + // pins are NOT connected to anything by default. + #ifndef SERIAL_PORT_MONITOR + #define SERIAL_PORT_MONITOR Serial + #endif + #ifndef SERIAL_PORT_HARDWARE + #define SERIAL_PORT_HARDWARE Serial + #endif +#endif diff --git a/ini/stm32g0.ini b/ini/stm32g0.ini index c80c8dd9e2..568d9c8e9f 100644 --- a/ini/stm32g0.ini +++ b/ini/stm32g0.ini @@ -13,12 +13,33 @@ # 0 : Cortex M0+ core (0:M0, 1-2:M3, 3-4:M4, 7:M7) # B1 : Line/Features # R : 64 pins (R:64 or 66, F:20) -# E : 512KB Flash-memory (C:256KB, D:384KB, E:512KB, G:1024KB) +# E : 512KB Flash-memory (B:128KB C:256KB, D:384KB, E:512KB, G:1024KB) # T : LQFP package # 6 : -40...85°C (7: ...105°C) # ################################# +# +# This I2C2(PB3:I2C2_SCL PB4:I2C2_SDA) is used by EBB42 V1.1 +# +[stm32g0_I2C2] +build_flags = -DPIN_WIRE_SCL=PB3 -DPIN_WIRE_SDA=PB4 + +# +# BigTreeTech EBB42 V1.1 (STM32G0B1CBT6 ARM Cortex-M0+) +# This board is being used to control Filament extruders. This is not supported for 3D printing, as it has no kinematics control +# +[env:BTT_EBB42_V1_1_filament_extruder] +extends = stm32_variant +platform = ststm32@~14.1.0 +platform_packages = framework-arduinoststm32@https://github.com/stm32duino/Arduino_Core_STM32/archive/main.zip +board = marlin_BTT_EBB42_V1_1 +board_build.offset = 0x0000 +board_upload.offset_address = 0x08000000 +build_flags = ${stm32_variant.build_flags} ${stm32g0_I2C2.build_flags} +upload_protocol = stlink +debug_tool = stlink + # # BigTreeTech SKR mini E3 V3.0 (STM32G0B1RET6 ARM Cortex-M0+) #