diff --git a/Marlin/src/core/boards.h b/Marlin/src/core/boards.h index d8872f0eb0..b67d42a3f7 100644 --- a/Marlin/src/core/boards.h +++ b/Marlin/src/core/boards.h @@ -84,6 +84,7 @@ #define BOARD_TRIGORILLA_14 443 // TriGorilla Anycubic version 1.4 based on RAMPS EFB #define BOARD_RAMPS_ENDER_4 243 // Creality: Ender-4, CR-8 #define BOARD_GT2560_V3 76 // Geeetech A10 +#define BOARD_FYSETC_F6_13 541 // Fysetc F6 // // Other ATmega1280, ATmega2560 diff --git a/Marlin/src/pins/pins.h b/Marlin/src/pins/pins.h index 019ed61066..6a45a7dcbd 100644 --- a/Marlin/src/pins/pins.h +++ b/Marlin/src/pins/pins.h @@ -152,6 +152,8 @@ #include "pins_RAMPS_ENDER_4.h" // ATmega2560 env:megaatmega2560 #elif MB(GT2560_V3) #include "pins_GT2560_V3.h" // ATmega2560 env:megaatmega2560 +#elif MB(FYSETC_F6_13) + #include "pins_FYSETC_F6_13.h" // ATmega2560 env:megaatmega2560 // // Other ATmega1280, ATmega2560 diff --git a/Marlin/src/pins/pins_FYSETC_F6_13.h b/Marlin/src/pins/pins_FYSETC_F6_13.h new file mode 100644 index 0000000000..061c8921a3 --- /dev/null +++ b/Marlin/src/pins/pins_FYSETC_F6_13.h @@ -0,0 +1,194 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2018 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +// +// Fysetc F6 pin assignments +// + +#ifndef __AVR_ATmega2560__ + #error "Oops! Make sure you have 'FYSETC_F6' selected from the 'Tools -> Boards' menu." +#endif + +#ifndef BOARD_NAME + #define BOARD_NAME "FYSETC_F6_13" +#endif + +// +// Limit Switches +// +#define X_MIN_PIN 63 +#define X_MAX_PIN 64 +#define Y_MIN_PIN 14 +#define Y_MAX_PIN 15 +#define Z_MIN_PIN 12 +#define Z_MAX_PIN 9 + +#ifndef FIL_RUNOUT_PIN + #define FIL_RUNOUT_PIN 10 +#endif + +// +// Z Probe (when not Z_MIN_PIN) +// +#ifndef Z_MIN_PROBE_PIN + #define Z_MIN_PROBE_PIN 9 // Servos pin +#endif + +// +// Steppers +// +#define X_STEP_PIN 54 +#define X_DIR_PIN 55 +#define X_ENABLE_PIN 38 +#ifndef X_CS_PIN + #define X_CS_PIN 70 +#endif + +#define Y_STEP_PIN 60 +#define Y_DIR_PIN 61 +#define Y_ENABLE_PIN 56 +#ifndef Y_CS_PIN + #define Y_CS_PIN 39 +#endif + +#define Z_STEP_PIN 43 +#define Z_DIR_PIN 48 +#define Z_ENABLE_PIN 58 +#ifndef Z_CS_PIN + #define Z_CS_PIN 74 +#endif + +#define E0_STEP_PIN 26 +#define E0_DIR_PIN 28 +#define E0_ENABLE_PIN 24 +#ifndef E0_CS_PIN + #define E0_CS_PIN 47 +#endif + +#define E1_STEP_PIN 36 +#define E1_DIR_PIN 34 +#define E1_ENABLE_PIN 30 +#ifndef E1_CS_PIN + #define E1_CS_PIN 32 +#endif + +#define E2_STEP_PIN 59 +#define E2_DIR_PIN 57 +#define E2_ENABLE_PIN 40 +#ifndef E2_CS_PIN + #define E2_CS_PIN 42 +#endif + +// +// Sensorless homing DIAG pin is not directly connected to the MCU. Close +// the jumper next to the limit switch socket when using sensorless homing. +// + +#define X_TMC2130_DIAG -1 +#define Y_TMC2130_DIAG -1 +#define Z_TMC2130_DIAG -1 +#define E0_TMC2130_DIAG -1 +#define E1_TMC2130_DIAG -1 +#define E2_TMC2130_DIAG -1 + +#if HAS_DRIVER(TMC2208) + // Software serial + #define X_SERIAL_RX_PIN 71 + #define X_SERIAL_TX_PIN 72 + #define Y_SERIAL_RX_PIN 73 + #define Y_SERIAL_TX_PIN 75 + #define Z_SERIAL_RX_PIN 78 + #define Z_SERIAL_TX_PIN 79 + #define E0_SERIAL_RX_PIN 76 + #define E0_SERIAL_TX_PIN 77 + #define E1_SERIAL_RX_PIN 80 + #define E1_SERIAL_TX_PIN 81 + #define E2_SERIAL_RX_PIN 22 + #define E2_SERIAL_TX_PIN 83 +#endif + +// +// Temperature Sensors +// +#define TEMP_0_PIN 12 // Analog Input +#define TEMP_1_PIN 13 // Analog Input +#define TEMP_2_PIN 14 // Analog Input +#define TEMP_BED_PIN 15 // Analog Input + +#ifndef FILWIDTH_PIN + #define FILWIDTH_PIN 9 // Analog Input on X+ endstop +#endif + +// +// Heaters / Fans +// +#define HEATER_0_PIN 5 +#define HEATER_1_PIN 6 +#define HEATER_2_PIN 7 +#define HEATER_BED_PIN 8 + +#define FAN_PIN 44 +#define FAN1_PIN 45 +#define FAN2_PIN 46 + +// +// Misc. Functions +// +#define SDSS 53 +#define LED_PIN 13 +#define KILL_PIN 41 + +#ifndef PS_ON_PIN + #define PS_ON_PIN 11 // Servos pin +#endif + +#ifndef RGB_LED_R_PIN + #define RGB_LED_R_PIN 3 +#endif +#ifndef RGB_LED_G_PIN + #define RGB_LED_G_PIN 4 +#endif +#ifndef RGB_LED_B_PIN + #define RGB_LED_B_PIN 9 +#endif +#ifndef RGB_LED_W_PIN + #define RGB_LED_W_PIN -1 +#endif + +// +// LCDs and Controllers +// +#define BEEPER_PIN 37 +#define SD_DETECT_PIN 49 + +#define LCD_PINS_RS 16 +#define LCD_PINS_ENABLE 17 +#define LCD_PINS_D4 23 +#define LCD_PINS_D5 25 +#define LCD_PINS_D6 27 +#define LCD_PINS_D7 29 + +#if ENABLED(NEWPANEL) + #define BTN_EN1 31 + #define BTN_EN2 33 + #define BTN_ENC 35 +#endif