From d277e93f4df441e0ce9f21e7d3466f8649433875 Mon Sep 17 00:00:00 2001 From: Tanguy Pruvot Date: Tue, 17 Sep 2019 04:32:55 +0200 Subject: [PATCH] Configurable TOUCH_BUTTONS repeat delays (#15245) --- Marlin/Configuration.h | 5 ++++- Marlin/src/lcd/menu/menu.cpp | 4 ++-- config/default/Configuration.h | 5 ++++- .../examples/3DFabXYZ/Migbot/Configuration.h | 5 ++++- .../ADIMLab/Gantry v1/Configuration.h | 5 ++++- .../ADIMLab/Gantry v2/Configuration.h | 5 ++++- .../AlephObjects/TAZ4/Configuration.h | 5 ++++- .../Alfawise/U20-bltouch/Configuration.h | 5 ++++- .../Alfawise/U20-bltouch/Configuration_adv.h | 8 +++---- config/examples/Alfawise/U20/Configuration.h | 7 ++++-- .../examples/Alfawise/U20/Configuration_adv.h | 8 +++---- .../AliExpress/CL-260/Configuration.h | 5 ++++- .../AliExpress/UM2pExt/Configuration.h | 5 ++++- config/examples/Anet/A2/Configuration.h | 5 ++++- config/examples/Anet/A2plus/Configuration.h | 5 ++++- config/examples/Anet/A6/Configuration.h | 5 ++++- config/examples/Anet/A8/Configuration.h | 5 ++++- config/examples/Anet/A8plus/Configuration.h | 5 ++++- config/examples/Anet/E16/Configuration.h | 5 ++++- config/examples/AnyCubic/i3/Configuration.h | 5 ++++- config/examples/ArmEd/Configuration.h | 5 ++++- config/examples/Azteeg/X5GT/Configuration.h | 5 ++++- .../BIBO/TouchX/cyclops/Configuration.h | 5 ++++- .../BIBO/TouchX/default/Configuration.h | 5 ++++- config/examples/BQ/Hephestos/Configuration.h | 5 ++++- .../examples/BQ/Hephestos_2/Configuration.h | 5 ++++- config/examples/BQ/WITBOX/Configuration.h | 5 ++++- config/examples/Cartesio/Configuration.h | 5 ++++- .../examples/Creality/CR-10/Configuration.h | 5 ++++- .../examples/Creality/CR-10S/Configuration.h | 5 ++++- .../Creality/CR-10_5S/Configuration.h | 5 ++++- .../Creality/CR-10mini/Configuration.h | 5 ++++- .../Creality/CR-20 Pro/Configuration.h | 5 ++++- .../examples/Creality/CR-20/Configuration.h | 5 ++++- config/examples/Creality/CR-8/Configuration.h | 5 ++++- .../examples/Creality/Ender-2/Configuration.h | 5 ++++- .../examples/Creality/Ender-3/Configuration.h | 5 ++++- .../examples/Creality/Ender-4/Configuration.h | 5 ++++- .../examples/Creality/Ender-5/Configuration.h | 5 ++++- .../Dagoma/Disco Ultimate/Configuration.h | 5 ++++- .../Sidewinder X1/Configuration.h | 5 ++++- config/examples/Einstart-S/Configuration.h | 5 ++++- config/examples/FYSETC/AIO_II/Configuration.h | 5 ++++- .../Cheetah 1.2/BLTouch/Configuration.h | 5 ++++- .../FYSETC/Cheetah 1.2/base/Configuration.h | 5 ++++- .../FYSETC/Cheetah/BLTouch/Configuration.h | 5 ++++- .../FYSETC/Cheetah/base/Configuration.h | 5 ++++- config/examples/FYSETC/F6_13/Configuration.h | 5 ++++- config/examples/Felix/Configuration.h | 5 ++++- config/examples/Felix/DUAL/Configuration.h | 5 ++++- .../FlashForge/CreatorPro/Configuration.h | 5 ++++- .../FolgerTech/i3-2020/Configuration.h | 5 ++++- .../examples/Formbot/Raptor/Configuration.h | 5 ++++- .../examples/Formbot/T_Rex_2+/Configuration.h | 5 ++++- .../examples/Formbot/T_Rex_3/Configuration.h | 5 ++++- config/examples/Geeetech/A10/Configuration.h | 5 ++++- config/examples/Geeetech/A10M/Configuration.h | 5 ++++- config/examples/Geeetech/A20M/Configuration.h | 5 ++++- .../examples/Geeetech/GT2560/Configuration.h | 5 ++++- .../Geeetech/I3_Pro_X-GT2560/Configuration.h | 5 ++++- .../Geeetech/MeCreator2/Configuration.h | 5 ++++- .../Prusa i3 Pro B/bltouch/Configuration.h | 5 ++++- .../Prusa i3 Pro B/noprobe/Configuration.h | 5 ++++- .../Geeetech/Prusa i3 Pro C/Configuration.h | 5 ++++- .../Geeetech/Prusa i3 Pro W/Configuration.h | 5 ++++- config/examples/HMS434/Configuration.h | 5 ++++- .../examples/Infitary/i3-M508/Configuration.h | 5 ++++- config/examples/JGAurora/A1/Configuration.h | 5 ++++- config/examples/JGAurora/A5/Configuration.h | 5 ++++- config/examples/JGAurora/A5S/Configuration.h | 5 ++++- config/examples/MakerParts/Configuration.h | 5 ++++- config/examples/Malyan/M150/Configuration.h | 5 ++++- config/examples/Malyan/M200/Configuration.h | 5 ++++- .../Micromake/C1/basic/Configuration.h | 5 ++++- .../Micromake/C1/enhanced/Configuration.h | 5 ++++- config/examples/Mks/Robin/Configuration.h | 22 ++++++++++++++----- config/examples/Mks/Sbase/Configuration.h | 5 ++++- .../Printrbot/PrintrboardG2/Configuration.h | 5 ++++- .../examples/RapideLite/RL200/Configuration.h | 5 ++++- .../examples/RepRapPro/Huxley/Configuration.h | 5 ++++- .../RepRapWorld/Megatronics/Configuration.h | 5 ++++- config/examples/RigidBot/Configuration.h | 5 ++++- config/examples/SCARA/Configuration.h | 5 ++++- .../STM32/Black_STM32F407VET6/Configuration.h | 5 ++++- .../examples/STM32/STM32F103R/Configuration.h | 5 ++++- config/examples/STM32/STM32F4/Configuration.h | 5 ++++- .../STM32/stm32f103ret6/Configuration.h | 5 ++++- config/examples/Sanguinololu/Configuration.h | 5 ++++- .../Tevo/Michelangelo/Configuration.h | 5 ++++- .../Tevo/Tarantula Pro/Configuration.h | 5 ++++- .../Tornado/V1 (MKS Base)/Configuration.h | 5 ++++- .../Tornado/V2 (MKS GEN-L)/Configuration.h | 5 ++++- config/examples/TheBorg/Configuration.h | 5 ++++- config/examples/TinyBoy2/Configuration.h | 5 ++++- config/examples/Tronxy/X1/Configuration.h | 5 ++++- config/examples/Tronxy/X3A/Configuration.h | 5 ++++- config/examples/Tronxy/X5S-2E/Configuration.h | 5 ++++- config/examples/Tronxy/X5S/Configuration.h | 5 ++++- config/examples/Tronxy/XY100/Configuration.h | 5 ++++- .../UltiMachine/Archim1/Configuration.h | 5 ++++- .../UltiMachine/Archim2/Configuration.h | 5 ++++- config/examples/VORONDesign/Configuration.h | 5 ++++- .../examples/Velleman/K8200/Configuration.h | 5 ++++- .../examples/Velleman/K8400/Configuration.h | 5 ++++- .../Velleman/K8400/Dual-head/Configuration.h | 5 ++++- .../examples/WASP/PowerWASP/Configuration.h | 5 ++++- .../Wanhao/Duplicator 6/Configuration.h | 5 ++++- .../Wanhao/Duplicator i3 Mini/Configuration.h | 5 ++++- .../examples/adafruit/ST7565/Configuration.h | 5 ++++- .../delta/Anycubic/Kossel/Configuration.h | 5 ++++- .../delta/Dreammaker/Overlord/Configuration.h | 5 ++++- .../Dreammaker/Overlord_Pro/Configuration.h | 5 ++++- .../FLSUN/auto_calibrate/Configuration.h | 5 ++++- .../delta/FLSUN/kossel/Configuration.h | 5 ++++- .../delta/FLSUN/kossel_mini/Configuration.h | 5 ++++- .../Geeetech/Rostock 301/Configuration.h | 5 ++++- .../delta/Hatchbox_Alpha/Configuration.h | 5 ++++- .../examples/delta/MKS/SBASE/Configuration.h | 5 ++++- .../delta/Tevo Little Monster/Configuration.h | 5 ++++- config/examples/delta/generic/Configuration.h | 5 ++++- .../delta/kossel_mini/Configuration.h | 5 ++++- .../examples/delta/kossel_pro/Configuration.h | 5 ++++- .../examples/delta/kossel_xl/Configuration.h | 5 ++++- .../examples/gCreate/gMax1.5+/Configuration.h | 5 ++++- config/examples/makibox/Configuration.h | 5 ++++- config/examples/tvrrug/Round2/Configuration.h | 5 ++++- config/examples/wt150/Configuration.h | 5 ++++- 127 files changed, 519 insertions(+), 140 deletions(-) diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index 01bd43b9cb..6f27160153 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -2062,6 +2062,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2201,7 +2204,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/Marlin/src/lcd/menu/menu.cpp b/Marlin/src/lcd/menu/menu.cpp index fb4db9742d..5590ef7143 100644 --- a/Marlin/src/lcd/menu/menu.cpp +++ b/Marlin/src/lcd/menu/menu.cpp @@ -144,7 +144,7 @@ void MenuItem_gcode::action(PGM_P const pgcode) { queue.inject_P(pgcode); } */ void MenuItemBase::edit(strfunc_t strfunc, loadfunc_t loadfunc) { #if ENABLED(TOUCH_BUTTONS) - ui.repeat_delay = 50; + ui.repeat_delay = BUTTON_DELAY_EDIT; #endif if (int16_t(ui.encoderPosition) < 0) ui.encoderPosition = 0; if (int16_t(ui.encoderPosition) > maxEditValue) ui.encoderPosition = maxEditValue; @@ -216,7 +216,7 @@ void MarlinUI::goto_screen(screenFunc_t screen, const uint16_t encoder/*=0*/, co if (currentScreen != screen) { #if ENABLED(TOUCH_BUTTONS) - repeat_delay = 250; + repeat_delay = BUTTON_DELAY_MENU; #endif #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) diff --git a/config/default/Configuration.h b/config/default/Configuration.h index 01bd43b9cb..6f27160153 100644 --- a/config/default/Configuration.h +++ b/config/default/Configuration.h @@ -2062,6 +2062,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2201,7 +2204,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/3DFabXYZ/Migbot/Configuration.h b/config/examples/3DFabXYZ/Migbot/Configuration.h index 60b4efdf48..7a45412513 100644 --- a/config/examples/3DFabXYZ/Migbot/Configuration.h +++ b/config/examples/3DFabXYZ/Migbot/Configuration.h @@ -2093,6 +2093,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2232,7 +2235,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/ADIMLab/Gantry v1/Configuration.h b/config/examples/ADIMLab/Gantry v1/Configuration.h index cd561145dc..65aca731fd 100644 --- a/config/examples/ADIMLab/Gantry v1/Configuration.h +++ b/config/examples/ADIMLab/Gantry v1/Configuration.h @@ -2063,6 +2063,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2202,7 +2205,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/ADIMLab/Gantry v2/Configuration.h b/config/examples/ADIMLab/Gantry v2/Configuration.h index 1b518e6ace..e626638e9b 100644 --- a/config/examples/ADIMLab/Gantry v2/Configuration.h +++ b/config/examples/ADIMLab/Gantry v2/Configuration.h @@ -2063,6 +2063,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2202,7 +2205,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/AlephObjects/TAZ4/Configuration.h b/config/examples/AlephObjects/TAZ4/Configuration.h index c72cccf498..ccd0d10c7b 100644 --- a/config/examples/AlephObjects/TAZ4/Configuration.h +++ b/config/examples/AlephObjects/TAZ4/Configuration.h @@ -2082,6 +2082,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2221,7 +2224,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/Alfawise/U20-bltouch/Configuration.h b/config/examples/Alfawise/U20-bltouch/Configuration.h index c1830874da..1a2c98952d 100644 --- a/config/examples/Alfawise/U20-bltouch/Configuration.h +++ b/config/examples/Alfawise/U20-bltouch/Configuration.h @@ -2145,6 +2145,9 @@ #if ENABLED(TOUCH_BUTTONS) #define TOUCH_CALIBRATION // Include user calibration widget in menus (Alfawise) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 100 // (ms) Button repeat delay for menus + #if ENABLED(TS_V11) // Alfawise U20 ILI9341 2.8 TP Ver 1.1 / Green PCB on the back of touchscreen #define XPT2046_X_CALIBRATION 11605 @@ -2295,7 +2298,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h index b6e55c045c..bee03c9c9a 100644 --- a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h +++ b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h @@ -921,7 +921,7 @@ #define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - #define EVENT_GCODE_SD_STOP "G28XY" // G-code to run on Stop Print (e.g., "G28XY" or "G27") + #define EVENT_GCODE_SD_STOP "G28X" // G-code to run on Stop Print (e.g., "G28XY" or "G27") /** * Continue after Power-Loss (Creality3D) @@ -976,10 +976,10 @@ #if ENABLED(SDCARD_SORT_ALPHA) #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_GCODE true // Allow turning sorting on/off with LCD and M34 g-code. + #define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting. #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_CACHE_NAMES true // Keep sorted items in RAM longer for speedy performance. Most expensive option. #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. diff --git a/config/examples/Alfawise/U20/Configuration.h b/config/examples/Alfawise/U20/Configuration.h index 69851bfab1..aa76f49d74 100644 --- a/config/examples/Alfawise/U20/Configuration.h +++ b/config/examples/Alfawise/U20/Configuration.h @@ -1403,7 +1403,7 @@ #if ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT MIN_PROBE_Y // Y point for Z homing when homing all axes (G28). + #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). #endif // Homing speeds (mm/m) @@ -2144,6 +2144,9 @@ #if ENABLED(TOUCH_BUTTONS) #define TOUCH_CALIBRATION // Include user calibration widget in menus (Alfawise) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 100 // (ms) Button repeat delay for menus + #if ENABLED(TS_V11) // Alfawise U20 ILI9341 2.8 TP Ver 1.1 / Green PCB on the back of touchscreen #define XPT2046_X_CALIBRATION 11605 @@ -2294,7 +2297,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/Alfawise/U20/Configuration_adv.h b/config/examples/Alfawise/U20/Configuration_adv.h index 623df47065..f94e349038 100644 --- a/config/examples/Alfawise/U20/Configuration_adv.h +++ b/config/examples/Alfawise/U20/Configuration_adv.h @@ -920,7 +920,7 @@ #define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - #define EVENT_GCODE_SD_STOP "G28XY" // G-code to run on Stop Print (e.g., "G28XY" or "G27") + #define EVENT_GCODE_SD_STOP "G28X" // G-code to run on Stop Print (e.g., "G28XY" or "G27") /** * Continue after Power-Loss (Creality3D) @@ -975,10 +975,10 @@ #if ENABLED(SDCARD_SORT_ALPHA) #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_GCODE true // Allow turning sorting on/off with LCD and M34 g-code. + #define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting. #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_CACHE_NAMES true // Keep sorted items in RAM longer for speedy performance. Most expensive option. #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. diff --git a/config/examples/AliExpress/CL-260/Configuration.h b/config/examples/AliExpress/CL-260/Configuration.h index f43458c678..327b9add00 100644 --- a/config/examples/AliExpress/CL-260/Configuration.h +++ b/config/examples/AliExpress/CL-260/Configuration.h @@ -2062,6 +2062,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2201,7 +2204,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/AliExpress/UM2pExt/Configuration.h b/config/examples/AliExpress/UM2pExt/Configuration.h index f7c013690a..161e478b0a 100644 --- a/config/examples/AliExpress/UM2pExt/Configuration.h +++ b/config/examples/AliExpress/UM2pExt/Configuration.h @@ -2073,6 +2073,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2212,7 +2215,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/Anet/A2/Configuration.h b/config/examples/Anet/A2/Configuration.h index 5a11bc87f1..95b20d3a4f 100644 --- a/config/examples/Anet/A2/Configuration.h +++ b/config/examples/Anet/A2/Configuration.h @@ -2064,6 +2064,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2203,7 +2206,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/Anet/A2plus/Configuration.h b/config/examples/Anet/A2plus/Configuration.h index b77a6e2a10..9b342797f6 100644 --- a/config/examples/Anet/A2plus/Configuration.h +++ b/config/examples/Anet/A2plus/Configuration.h @@ -2064,6 +2064,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2203,7 +2206,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/Anet/A6/Configuration.h b/config/examples/Anet/A6/Configuration.h index 75188492b9..3a0ef22f18 100644 --- a/config/examples/Anet/A6/Configuration.h +++ b/config/examples/Anet/A6/Configuration.h @@ -2215,6 +2215,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2354,7 +2357,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/Anet/A8/Configuration.h b/config/examples/Anet/A8/Configuration.h index 7ce3f9820e..9403727375 100644 --- a/config/examples/Anet/A8/Configuration.h +++ b/config/examples/Anet/A8/Configuration.h @@ -2077,6 +2077,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2216,7 +2219,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/Anet/A8plus/Configuration.h b/config/examples/Anet/A8plus/Configuration.h index df8fdfea8e..80e6720619 100644 --- a/config/examples/Anet/A8plus/Configuration.h +++ b/config/examples/Anet/A8plus/Configuration.h @@ -2073,6 +2073,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2212,7 +2215,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/Anet/E16/Configuration.h b/config/examples/Anet/E16/Configuration.h index 91bfca0d2b..29dfe0173d 100644 --- a/config/examples/Anet/E16/Configuration.h +++ b/config/examples/Anet/E16/Configuration.h @@ -2074,6 +2074,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2213,7 +2216,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/AnyCubic/i3/Configuration.h b/config/examples/AnyCubic/i3/Configuration.h index 6310c92f66..524fb60acc 100644 --- a/config/examples/AnyCubic/i3/Configuration.h +++ b/config/examples/AnyCubic/i3/Configuration.h @@ -2072,6 +2072,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2211,7 +2214,7 @@ */ #define NUM_SERVOS 1 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/ArmEd/Configuration.h b/config/examples/ArmEd/Configuration.h index 809be59040..ffb9833c8f 100644 --- a/config/examples/ArmEd/Configuration.h +++ b/config/examples/ArmEd/Configuration.h @@ -2063,6 +2063,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2202,7 +2205,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/Azteeg/X5GT/Configuration.h b/config/examples/Azteeg/X5GT/Configuration.h index 52a660bfbe..48de22707d 100644 --- a/config/examples/Azteeg/X5GT/Configuration.h +++ b/config/examples/Azteeg/X5GT/Configuration.h @@ -2062,6 +2062,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2201,7 +2204,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration.h b/config/examples/BIBO/TouchX/cyclops/Configuration.h index 94eb4d543a..8becbcec1d 100644 --- a/config/examples/BIBO/TouchX/cyclops/Configuration.h +++ b/config/examples/BIBO/TouchX/cyclops/Configuration.h @@ -2062,6 +2062,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2201,7 +2204,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/BIBO/TouchX/default/Configuration.h b/config/examples/BIBO/TouchX/default/Configuration.h index af5e3df4be..da21332faf 100644 --- a/config/examples/BIBO/TouchX/default/Configuration.h +++ b/config/examples/BIBO/TouchX/default/Configuration.h @@ -2062,6 +2062,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2201,7 +2204,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/BQ/Hephestos/Configuration.h b/config/examples/BQ/Hephestos/Configuration.h index 87f7055863..5d12c9c917 100644 --- a/config/examples/BQ/Hephestos/Configuration.h +++ b/config/examples/BQ/Hephestos/Configuration.h @@ -2050,6 +2050,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2189,7 +2192,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/BQ/Hephestos_2/Configuration.h b/config/examples/BQ/Hephestos_2/Configuration.h index 3b702a3411..201d30f980 100644 --- a/config/examples/BQ/Hephestos_2/Configuration.h +++ b/config/examples/BQ/Hephestos_2/Configuration.h @@ -2062,6 +2062,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2201,7 +2204,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/BQ/WITBOX/Configuration.h b/config/examples/BQ/WITBOX/Configuration.h index 7c200db6d7..c8c6cf044b 100644 --- a/config/examples/BQ/WITBOX/Configuration.h +++ b/config/examples/BQ/WITBOX/Configuration.h @@ -2050,6 +2050,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2189,7 +2192,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/Cartesio/Configuration.h b/config/examples/Cartesio/Configuration.h index 95eef70a68..46c4f3c788 100644 --- a/config/examples/Cartesio/Configuration.h +++ b/config/examples/Cartesio/Configuration.h @@ -2061,6 +2061,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2200,7 +2203,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/Creality/CR-10/Configuration.h b/config/examples/Creality/CR-10/Configuration.h index 5e235d008b..8dcebd612a 100644 --- a/config/examples/Creality/CR-10/Configuration.h +++ b/config/examples/Creality/CR-10/Configuration.h @@ -2072,6 +2072,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2211,7 +2214,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/Creality/CR-10S/Configuration.h b/config/examples/Creality/CR-10S/Configuration.h index 0ff23f0a8a..7e8ac0eff3 100644 --- a/config/examples/Creality/CR-10S/Configuration.h +++ b/config/examples/Creality/CR-10S/Configuration.h @@ -2063,6 +2063,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2202,7 +2205,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/Creality/CR-10_5S/Configuration.h b/config/examples/Creality/CR-10_5S/Configuration.h index 65bf67a0c0..5705f0108a 100644 --- a/config/examples/Creality/CR-10_5S/Configuration.h +++ b/config/examples/Creality/CR-10_5S/Configuration.h @@ -2065,6 +2065,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2204,7 +2207,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/Creality/CR-10mini/Configuration.h b/config/examples/Creality/CR-10mini/Configuration.h index ff4970d85a..0062baa8d9 100644 --- a/config/examples/Creality/CR-10mini/Configuration.h +++ b/config/examples/Creality/CR-10mini/Configuration.h @@ -2081,6 +2081,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2220,7 +2223,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/Creality/CR-20 Pro/Configuration.h b/config/examples/Creality/CR-20 Pro/Configuration.h index 095ff5da19..1728cc2059 100644 --- a/config/examples/Creality/CR-20 Pro/Configuration.h +++ b/config/examples/Creality/CR-20 Pro/Configuration.h @@ -2065,6 +2065,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2204,7 +2207,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/Creality/CR-20/Configuration.h b/config/examples/Creality/CR-20/Configuration.h index d53cfb05e1..7e7c544857 100644 --- a/config/examples/Creality/CR-20/Configuration.h +++ b/config/examples/Creality/CR-20/Configuration.h @@ -2065,6 +2065,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2204,7 +2207,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/Creality/CR-8/Configuration.h b/config/examples/Creality/CR-8/Configuration.h index 205cda5d7e..04dd566185 100644 --- a/config/examples/Creality/CR-8/Configuration.h +++ b/config/examples/Creality/CR-8/Configuration.h @@ -2072,6 +2072,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2211,7 +2214,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/Creality/Ender-2/Configuration.h b/config/examples/Creality/Ender-2/Configuration.h index 18b695d6c2..3dd6583250 100644 --- a/config/examples/Creality/Ender-2/Configuration.h +++ b/config/examples/Creality/Ender-2/Configuration.h @@ -2066,6 +2066,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2205,7 +2208,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/Creality/Ender-3/Configuration.h b/config/examples/Creality/Ender-3/Configuration.h index cfe05583a4..019135ee1f 100644 --- a/config/examples/Creality/Ender-3/Configuration.h +++ b/config/examples/Creality/Ender-3/Configuration.h @@ -2066,6 +2066,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2205,7 +2208,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/Creality/Ender-4/Configuration.h b/config/examples/Creality/Ender-4/Configuration.h index 937034e277..84f7304dbf 100644 --- a/config/examples/Creality/Ender-4/Configuration.h +++ b/config/examples/Creality/Ender-4/Configuration.h @@ -2072,6 +2072,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2211,7 +2214,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/Creality/Ender-5/Configuration.h b/config/examples/Creality/Ender-5/Configuration.h index cecb5a193b..c1db6363af 100644 --- a/config/examples/Creality/Ender-5/Configuration.h +++ b/config/examples/Creality/Ender-5/Configuration.h @@ -2065,6 +2065,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2204,7 +2207,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration.h b/config/examples/Dagoma/Disco Ultimate/Configuration.h index b6a6a816dd..a3ec472c7d 100644 --- a/config/examples/Dagoma/Disco Ultimate/Configuration.h +++ b/config/examples/Dagoma/Disco Ultimate/Configuration.h @@ -2062,6 +2062,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2201,7 +2204,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration.h b/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration.h index 79a4affbbf..fc9ea5e7bb 100755 --- a/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration.h +++ b/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration.h @@ -2067,6 +2067,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2206,7 +2209,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/Einstart-S/Configuration.h b/config/examples/Einstart-S/Configuration.h index d7544380a8..243b914821 100644 --- a/config/examples/Einstart-S/Configuration.h +++ b/config/examples/Einstart-S/Configuration.h @@ -2072,6 +2072,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2211,7 +2214,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/FYSETC/AIO_II/Configuration.h b/config/examples/FYSETC/AIO_II/Configuration.h index 4705794426..0005f60dc7 100644 --- a/config/examples/FYSETC/AIO_II/Configuration.h +++ b/config/examples/FYSETC/AIO_II/Configuration.h @@ -2067,6 +2067,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2206,7 +2209,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration.h b/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration.h index bf432c2d8b..eb6bd1b8e0 100644 --- a/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration.h +++ b/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration.h @@ -2067,6 +2067,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2206,7 +2209,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/FYSETC/Cheetah 1.2/base/Configuration.h b/config/examples/FYSETC/Cheetah 1.2/base/Configuration.h index a4a8010bc1..a12a5f4f44 100644 --- a/config/examples/FYSETC/Cheetah 1.2/base/Configuration.h +++ b/config/examples/FYSETC/Cheetah 1.2/base/Configuration.h @@ -2067,6 +2067,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2206,7 +2209,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/FYSETC/Cheetah/BLTouch/Configuration.h b/config/examples/FYSETC/Cheetah/BLTouch/Configuration.h index e4969280dc..f665276dd5 100644 --- a/config/examples/FYSETC/Cheetah/BLTouch/Configuration.h +++ b/config/examples/FYSETC/Cheetah/BLTouch/Configuration.h @@ -2067,6 +2067,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2206,7 +2209,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/FYSETC/Cheetah/base/Configuration.h b/config/examples/FYSETC/Cheetah/base/Configuration.h index 397783078d..fcb1a83477 100644 --- a/config/examples/FYSETC/Cheetah/base/Configuration.h +++ b/config/examples/FYSETC/Cheetah/base/Configuration.h @@ -2067,6 +2067,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2206,7 +2209,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/FYSETC/F6_13/Configuration.h b/config/examples/FYSETC/F6_13/Configuration.h index 4e81b16772..2cff57d64c 100644 --- a/config/examples/FYSETC/F6_13/Configuration.h +++ b/config/examples/FYSETC/F6_13/Configuration.h @@ -2064,6 +2064,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2207,7 +2210,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/Felix/Configuration.h b/config/examples/Felix/Configuration.h index c9e2656a0f..2677dee075 100644 --- a/config/examples/Felix/Configuration.h +++ b/config/examples/Felix/Configuration.h @@ -2044,6 +2044,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2183,7 +2186,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/Felix/DUAL/Configuration.h b/config/examples/Felix/DUAL/Configuration.h index ca206384dc..f7e24fa1e2 100644 --- a/config/examples/Felix/DUAL/Configuration.h +++ b/config/examples/Felix/DUAL/Configuration.h @@ -2044,6 +2044,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2183,7 +2186,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/FlashForge/CreatorPro/Configuration.h b/config/examples/FlashForge/CreatorPro/Configuration.h index 90ac1d8f23..1a6df0599b 100644 --- a/config/examples/FlashForge/CreatorPro/Configuration.h +++ b/config/examples/FlashForge/CreatorPro/Configuration.h @@ -2053,6 +2053,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2192,7 +2195,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/FolgerTech/i3-2020/Configuration.h b/config/examples/FolgerTech/i3-2020/Configuration.h index 2b9da3e4c8..597b3e9ec5 100644 --- a/config/examples/FolgerTech/i3-2020/Configuration.h +++ b/config/examples/FolgerTech/i3-2020/Configuration.h @@ -2068,6 +2068,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2207,7 +2210,7 @@ */ #define NUM_SERVOS 2 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 500, 500 } diff --git a/config/examples/Formbot/Raptor/Configuration.h b/config/examples/Formbot/Raptor/Configuration.h index 04cf3d86a6..9d2a83ae57 100644 --- a/config/examples/Formbot/Raptor/Configuration.h +++ b/config/examples/Formbot/Raptor/Configuration.h @@ -2167,6 +2167,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2306,7 +2309,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/Formbot/T_Rex_2+/Configuration.h b/config/examples/Formbot/T_Rex_2+/Configuration.h index d0b0e97d00..728f74b2e3 100644 --- a/config/examples/Formbot/T_Rex_2+/Configuration.h +++ b/config/examples/Formbot/T_Rex_2+/Configuration.h @@ -2096,6 +2096,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2235,7 +2238,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/Formbot/T_Rex_3/Configuration.h b/config/examples/Formbot/T_Rex_3/Configuration.h index 925ee2d090..6a165246db 100644 --- a/config/examples/Formbot/T_Rex_3/Configuration.h +++ b/config/examples/Formbot/T_Rex_3/Configuration.h @@ -2090,6 +2090,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2229,7 +2232,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/Geeetech/A10/Configuration.h b/config/examples/Geeetech/A10/Configuration.h index b01cc41eee..5a706b6dd2 100644 --- a/config/examples/Geeetech/A10/Configuration.h +++ b/config/examples/Geeetech/A10/Configuration.h @@ -2047,6 +2047,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2186,7 +2189,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/Geeetech/A10M/Configuration.h b/config/examples/Geeetech/A10M/Configuration.h index b8074496f1..9d927899db 100644 --- a/config/examples/Geeetech/A10M/Configuration.h +++ b/config/examples/Geeetech/A10M/Configuration.h @@ -2047,6 +2047,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2186,7 +2189,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/Geeetech/A20M/Configuration.h b/config/examples/Geeetech/A20M/Configuration.h index 7e6ec407da..798416d8ec 100644 --- a/config/examples/Geeetech/A20M/Configuration.h +++ b/config/examples/Geeetech/A20M/Configuration.h @@ -2049,6 +2049,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2188,7 +2191,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/Geeetech/GT2560/Configuration.h b/config/examples/Geeetech/GT2560/Configuration.h index 7eb1b85d02..76dff419ab 100644 --- a/config/examples/Geeetech/GT2560/Configuration.h +++ b/config/examples/Geeetech/GT2560/Configuration.h @@ -2077,6 +2077,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2216,7 +2219,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h index f0214ee729..289ade265e 100644 --- a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h +++ b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h @@ -2062,6 +2062,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2201,7 +2204,7 @@ */ #define NUM_SERVOS 1 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/Geeetech/MeCreator2/Configuration.h b/config/examples/Geeetech/MeCreator2/Configuration.h index 7fcce2ac16..532c2a9fe1 100644 --- a/config/examples/Geeetech/MeCreator2/Configuration.h +++ b/config/examples/Geeetech/MeCreator2/Configuration.h @@ -2069,6 +2069,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2208,7 +2211,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h index 57fc7a77ff..fe2da423f2 100644 --- a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h @@ -2083,6 +2083,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2222,7 +2225,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h index a6a16ff444..319314339c 100644 --- a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h @@ -2082,6 +2082,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2221,7 +2224,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h index 806fb97f42..3a6c6cce2e 100644 --- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h @@ -2062,6 +2062,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2201,7 +2204,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h index bafd7dd081..96123fd322 100644 --- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h @@ -2062,6 +2062,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2201,7 +2204,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/HMS434/Configuration.h b/config/examples/HMS434/Configuration.h index 91449d8217..c092b6d028 100644 --- a/config/examples/HMS434/Configuration.h +++ b/config/examples/HMS434/Configuration.h @@ -2043,6 +2043,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2182,7 +2185,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/Infitary/i3-M508/Configuration.h b/config/examples/Infitary/i3-M508/Configuration.h index e444d93972..6ad0092b29 100644 --- a/config/examples/Infitary/i3-M508/Configuration.h +++ b/config/examples/Infitary/i3-M508/Configuration.h @@ -2066,6 +2066,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2205,7 +2208,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/JGAurora/A1/Configuration.h b/config/examples/JGAurora/A1/Configuration.h index 38b8449e9b..6197b19513 100644 --- a/config/examples/JGAurora/A1/Configuration.h +++ b/config/examples/JGAurora/A1/Configuration.h @@ -2071,6 +2071,9 @@ // #define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2211,7 +2214,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/JGAurora/A5/Configuration.h b/config/examples/JGAurora/A5/Configuration.h index 82a2d9f55a..98b90e37b4 100644 --- a/config/examples/JGAurora/A5/Configuration.h +++ b/config/examples/JGAurora/A5/Configuration.h @@ -2074,6 +2074,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2213,7 +2216,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/JGAurora/A5S/Configuration.h b/config/examples/JGAurora/A5S/Configuration.h index bdb34d4675..6fea80ee97 100644 --- a/config/examples/JGAurora/A5S/Configuration.h +++ b/config/examples/JGAurora/A5S/Configuration.h @@ -2071,6 +2071,9 @@ // #define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2211,7 +2214,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/MakerParts/Configuration.h b/config/examples/MakerParts/Configuration.h index 3867578025..f54f8eacf4 100644 --- a/config/examples/MakerParts/Configuration.h +++ b/config/examples/MakerParts/Configuration.h @@ -2082,6 +2082,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2221,7 +2224,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/Malyan/M150/Configuration.h b/config/examples/Malyan/M150/Configuration.h index cfe340da3b..01714089c4 100644 --- a/config/examples/Malyan/M150/Configuration.h +++ b/config/examples/Malyan/M150/Configuration.h @@ -2090,6 +2090,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2229,7 +2232,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/Malyan/M200/Configuration.h b/config/examples/Malyan/M200/Configuration.h index e577fb1db3..2c39159a14 100644 --- a/config/examples/Malyan/M200/Configuration.h +++ b/config/examples/Malyan/M200/Configuration.h @@ -2061,6 +2061,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2200,7 +2203,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/Micromake/C1/basic/Configuration.h b/config/examples/Micromake/C1/basic/Configuration.h index 002791122c..e7c9c15672 100644 --- a/config/examples/Micromake/C1/basic/Configuration.h +++ b/config/examples/Micromake/C1/basic/Configuration.h @@ -2066,6 +2066,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2205,7 +2208,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/Micromake/C1/enhanced/Configuration.h b/config/examples/Micromake/C1/enhanced/Configuration.h index 5b33605548..54464013b1 100644 --- a/config/examples/Micromake/C1/enhanced/Configuration.h +++ b/config/examples/Micromake/C1/enhanced/Configuration.h @@ -2066,6 +2066,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2205,7 +2208,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/Mks/Robin/Configuration.h b/config/examples/Mks/Robin/Configuration.h index b664f5a5b4..23ade80721 100644 --- a/config/examples/Mks/Robin/Configuration.h +++ b/config/examples/Mks/Robin/Configuration.h @@ -2062,12 +2062,22 @@ // // ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 // -//#define TOUCH_BUTTONS +#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + + /* MKS Robin TFT v2.0 */ + #define XPT2046_X_CALIBRATION 12013 + #define XPT2046_Y_CALIBRATION -8711 + #define XPT2046_X_OFFSET -32 + #define XPT2046_Y_OFFSET 256 + + /* MKS Robin TFT v1.1 */ + //#define XPT2046_X_CALIBRATION -11792 + //#define XPT2046_Y_CALIBRATION 8947 + //#define XPT2046_X_OFFSET 342 + //#define XPT2046_Y_OFFSET -19 #endif // @@ -2203,7 +2213,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/Mks/Sbase/Configuration.h b/config/examples/Mks/Sbase/Configuration.h index 0198c2c63d..c39645d44a 100644 --- a/config/examples/Mks/Sbase/Configuration.h +++ b/config/examples/Mks/Sbase/Configuration.h @@ -2062,6 +2062,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2201,7 +2204,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/Printrbot/PrintrboardG2/Configuration.h b/config/examples/Printrbot/PrintrboardG2/Configuration.h index 2f07d55635..168e6d6447 100644 --- a/config/examples/Printrbot/PrintrboardG2/Configuration.h +++ b/config/examples/Printrbot/PrintrboardG2/Configuration.h @@ -2070,6 +2070,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2209,7 +2212,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/RapideLite/RL200/Configuration.h b/config/examples/RapideLite/RL200/Configuration.h index 11a2349f1c..19e900f645 100644 --- a/config/examples/RapideLite/RL200/Configuration.h +++ b/config/examples/RapideLite/RL200/Configuration.h @@ -2062,6 +2062,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2201,7 +2204,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/RepRapPro/Huxley/Configuration.h b/config/examples/RepRapPro/Huxley/Configuration.h index 2e77e07e7c..0c72d23a99 100644 --- a/config/examples/RepRapPro/Huxley/Configuration.h +++ b/config/examples/RepRapPro/Huxley/Configuration.h @@ -2111,6 +2111,9 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2250,7 +2253,7 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/RepRapWorld/Megatronics/Configuration.h b/config/examples/RepRapWorld/Megatronics/Configuration.h index ac6f9b0521..428006ffcb 100644 --- a/config/examples/RepRapWorld/Megatronics/Configuration.h +++ b/config/examples/RepRapWorld/Megatronics/Configuration.h @@ -2062,6 +2062,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2201,7 +2204,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/RigidBot/Configuration.h b/config/examples/RigidBot/Configuration.h index 8967e587b4..f0a5889fa2 100644 --- a/config/examples/RigidBot/Configuration.h +++ b/config/examples/RigidBot/Configuration.h @@ -2062,6 +2062,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2201,7 +2204,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/SCARA/Configuration.h b/config/examples/SCARA/Configuration.h index 0becdd44d4..67eeb76771 100644 --- a/config/examples/SCARA/Configuration.h +++ b/config/examples/SCARA/Configuration.h @@ -2071,6 +2071,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2210,7 +2213,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration.h b/config/examples/STM32/Black_STM32F407VET6/Configuration.h index dba1701248..f2a82f9b73 100644 --- a/config/examples/STM32/Black_STM32F407VET6/Configuration.h +++ b/config/examples/STM32/Black_STM32F407VET6/Configuration.h @@ -2062,6 +2062,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2201,7 +2204,7 @@ */ #define NUM_SERVOS 2 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300, 300 } diff --git a/config/examples/STM32/STM32F103R/Configuration.h b/config/examples/STM32/STM32F103R/Configuration.h index 8a6ae1b1c6..61eb03301c 100644 --- a/config/examples/STM32/STM32F103R/Configuration.h +++ b/config/examples/STM32/STM32F103R/Configuration.h @@ -2064,6 +2064,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2203,7 +2206,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/STM32/STM32F4/Configuration.h b/config/examples/STM32/STM32F4/Configuration.h index 7783fbca52..d365a1160b 100644 --- a/config/examples/STM32/STM32F4/Configuration.h +++ b/config/examples/STM32/STM32F4/Configuration.h @@ -2062,6 +2062,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2201,7 +2204,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/STM32/stm32f103ret6/Configuration.h b/config/examples/STM32/stm32f103ret6/Configuration.h index 6c3881c7d8..3370e292bf 100644 --- a/config/examples/STM32/stm32f103ret6/Configuration.h +++ b/config/examples/STM32/stm32f103ret6/Configuration.h @@ -2064,6 +2064,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2203,7 +2206,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/Sanguinololu/Configuration.h b/config/examples/Sanguinololu/Configuration.h index d5d4b9eda1..c80e5883f2 100644 --- a/config/examples/Sanguinololu/Configuration.h +++ b/config/examples/Sanguinololu/Configuration.h @@ -2093,6 +2093,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2232,7 +2235,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/Tevo/Michelangelo/Configuration.h b/config/examples/Tevo/Michelangelo/Configuration.h index 9ff626177d..bae103e3b4 100644 --- a/config/examples/Tevo/Michelangelo/Configuration.h +++ b/config/examples/Tevo/Michelangelo/Configuration.h @@ -2067,6 +2067,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2206,7 +2209,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/Tevo/Tarantula Pro/Configuration.h b/config/examples/Tevo/Tarantula Pro/Configuration.h index d2f22e443f..42dc8c2732 100644 --- a/config/examples/Tevo/Tarantula Pro/Configuration.h +++ b/config/examples/Tevo/Tarantula Pro/Configuration.h @@ -2060,6 +2060,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2199,7 +2202,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h index 72b5341bd9..de30bf0f23 100644 --- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h +++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h @@ -2067,6 +2067,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2206,7 +2209,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h index a4228d0cc1..95c502f946 100644 --- a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h +++ b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h @@ -2067,6 +2067,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2206,7 +2209,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/TheBorg/Configuration.h b/config/examples/TheBorg/Configuration.h index 3fd242576a..87fc446338 100644 --- a/config/examples/TheBorg/Configuration.h +++ b/config/examples/TheBorg/Configuration.h @@ -2062,6 +2062,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2201,7 +2204,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/TinyBoy2/Configuration.h b/config/examples/TinyBoy2/Configuration.h index fa9c5b53a1..feb83f42a1 100644 --- a/config/examples/TinyBoy2/Configuration.h +++ b/config/examples/TinyBoy2/Configuration.h @@ -2118,6 +2118,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2257,7 +2260,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/Tronxy/X1/Configuration.h b/config/examples/Tronxy/X1/Configuration.h index 9e50cb9e2f..8ea89c2ae6 100644 --- a/config/examples/Tronxy/X1/Configuration.h +++ b/config/examples/Tronxy/X1/Configuration.h @@ -2062,6 +2062,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2201,7 +2204,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/Tronxy/X3A/Configuration.h b/config/examples/Tronxy/X3A/Configuration.h index a5c5163ab9..95928ea1ed 100644 --- a/config/examples/Tronxy/X3A/Configuration.h +++ b/config/examples/Tronxy/X3A/Configuration.h @@ -2066,6 +2066,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2205,7 +2208,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/Tronxy/X5S-2E/Configuration.h b/config/examples/Tronxy/X5S-2E/Configuration.h index 43409e6b08..dc791fff50 100644 --- a/config/examples/Tronxy/X5S-2E/Configuration.h +++ b/config/examples/Tronxy/X5S-2E/Configuration.h @@ -2083,6 +2083,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2222,7 +2225,7 @@ */ #define NUM_SERVOS 2 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300, 300 } diff --git a/config/examples/Tronxy/X5S/Configuration.h b/config/examples/Tronxy/X5S/Configuration.h index 7305baa79b..86436a79dc 100644 --- a/config/examples/Tronxy/X5S/Configuration.h +++ b/config/examples/Tronxy/X5S/Configuration.h @@ -2062,6 +2062,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2201,7 +2204,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/Tronxy/XY100/Configuration.h b/config/examples/Tronxy/XY100/Configuration.h index a26fd4047d..9617b56074 100644 --- a/config/examples/Tronxy/XY100/Configuration.h +++ b/config/examples/Tronxy/XY100/Configuration.h @@ -2073,6 +2073,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2212,7 +2215,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/UltiMachine/Archim1/Configuration.h b/config/examples/UltiMachine/Archim1/Configuration.h index 249574acae..eb21755fad 100644 --- a/config/examples/UltiMachine/Archim1/Configuration.h +++ b/config/examples/UltiMachine/Archim1/Configuration.h @@ -2062,6 +2062,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2201,7 +2204,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/UltiMachine/Archim2/Configuration.h b/config/examples/UltiMachine/Archim2/Configuration.h index 620f5456cf..6a4fcf3680 100644 --- a/config/examples/UltiMachine/Archim2/Configuration.h +++ b/config/examples/UltiMachine/Archim2/Configuration.h @@ -2062,6 +2062,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2201,7 +2204,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/VORONDesign/Configuration.h b/config/examples/VORONDesign/Configuration.h index 970f990c9b..70baf6e196 100644 --- a/config/examples/VORONDesign/Configuration.h +++ b/config/examples/VORONDesign/Configuration.h @@ -2071,6 +2071,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2210,7 +2213,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/Velleman/K8200/Configuration.h b/config/examples/Velleman/K8200/Configuration.h index 5ab1deee05..eb8416a582 100644 --- a/config/examples/Velleman/K8200/Configuration.h +++ b/config/examples/Velleman/K8200/Configuration.h @@ -2060,6 +2060,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2199,7 +2202,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/Velleman/K8400/Configuration.h b/config/examples/Velleman/K8400/Configuration.h index 4f6eacc27e..3bc0bc38aa 100644 --- a/config/examples/Velleman/K8400/Configuration.h +++ b/config/examples/Velleman/K8400/Configuration.h @@ -2062,6 +2062,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2202,7 +2205,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration.h b/config/examples/Velleman/K8400/Dual-head/Configuration.h index 3d7006f1c9..302a11df8f 100644 --- a/config/examples/Velleman/K8400/Dual-head/Configuration.h +++ b/config/examples/Velleman/K8400/Dual-head/Configuration.h @@ -2062,6 +2062,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2202,7 +2205,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/WASP/PowerWASP/Configuration.h b/config/examples/WASP/PowerWASP/Configuration.h index 223bba5951..77b6d337d1 100644 --- a/config/examples/WASP/PowerWASP/Configuration.h +++ b/config/examples/WASP/PowerWASP/Configuration.h @@ -2081,6 +2081,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2220,7 +2223,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/Wanhao/Duplicator 6/Configuration.h b/config/examples/Wanhao/Duplicator 6/Configuration.h index 99861f8dd6..9c49f7737c 100644 --- a/config/examples/Wanhao/Duplicator 6/Configuration.h +++ b/config/examples/Wanhao/Duplicator 6/Configuration.h @@ -2075,6 +2075,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2214,7 +2217,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h index 07370c873f..9bf523593e 100755 --- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h +++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h @@ -2062,6 +2062,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2201,7 +2204,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/adafruit/ST7565/Configuration.h b/config/examples/adafruit/ST7565/Configuration.h index 31f49f3a1b..64561330a3 100644 --- a/config/examples/adafruit/ST7565/Configuration.h +++ b/config/examples/adafruit/ST7565/Configuration.h @@ -2062,6 +2062,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2201,7 +2204,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/delta/Anycubic/Kossel/Configuration.h b/config/examples/delta/Anycubic/Kossel/Configuration.h index 8a290cd458..561faf865b 100644 --- a/config/examples/delta/Anycubic/Kossel/Configuration.h +++ b/config/examples/delta/Anycubic/Kossel/Configuration.h @@ -2236,6 +2236,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2375,7 +2378,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration.h b/config/examples/delta/Dreammaker/Overlord/Configuration.h index c42d48bd5a..6f4f9a1049 100644 --- a/config/examples/delta/Dreammaker/Overlord/Configuration.h +++ b/config/examples/delta/Dreammaker/Overlord/Configuration.h @@ -2172,6 +2172,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2311,7 +2314,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h index 56f1be5ede..958f15d38e 100644 --- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h +++ b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h @@ -2183,6 +2183,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2322,7 +2325,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h index 368a0bf0d2..8d215b8c5c 100644 --- a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h +++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h @@ -2176,6 +2176,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2315,7 +2318,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/delta/FLSUN/kossel/Configuration.h b/config/examples/delta/FLSUN/kossel/Configuration.h index 2f533ebf55..bf1e110bdc 100644 --- a/config/examples/delta/FLSUN/kossel/Configuration.h +++ b/config/examples/delta/FLSUN/kossel/Configuration.h @@ -2175,6 +2175,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2314,7 +2317,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration.h b/config/examples/delta/FLSUN/kossel_mini/Configuration.h index 2790a620e3..0f83823819 100644 --- a/config/examples/delta/FLSUN/kossel_mini/Configuration.h +++ b/config/examples/delta/FLSUN/kossel_mini/Configuration.h @@ -2175,6 +2175,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2314,7 +2317,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration.h b/config/examples/delta/Geeetech/Rostock 301/Configuration.h index 06e5079248..701878728c 100644 --- a/config/examples/delta/Geeetech/Rostock 301/Configuration.h +++ b/config/examples/delta/Geeetech/Rostock 301/Configuration.h @@ -2164,6 +2164,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2303,7 +2306,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/delta/Hatchbox_Alpha/Configuration.h b/config/examples/delta/Hatchbox_Alpha/Configuration.h index 3d972806b1..6312b27b4d 100644 --- a/config/examples/delta/Hatchbox_Alpha/Configuration.h +++ b/config/examples/delta/Hatchbox_Alpha/Configuration.h @@ -2178,6 +2178,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2317,7 +2320,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/delta/MKS/SBASE/Configuration.h b/config/examples/delta/MKS/SBASE/Configuration.h index 2b1969d169..aaddf0f9ee 100644 --- a/config/examples/delta/MKS/SBASE/Configuration.h +++ b/config/examples/delta/MKS/SBASE/Configuration.h @@ -2163,6 +2163,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2302,7 +2305,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/delta/Tevo Little Monster/Configuration.h b/config/examples/delta/Tevo Little Monster/Configuration.h index 51101aaba8..2ae1ee35b8 100644 --- a/config/examples/delta/Tevo Little Monster/Configuration.h +++ b/config/examples/delta/Tevo Little Monster/Configuration.h @@ -2167,6 +2167,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2306,7 +2309,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/delta/generic/Configuration.h b/config/examples/delta/generic/Configuration.h index 2a8613b2d4..322557c1ba 100644 --- a/config/examples/delta/generic/Configuration.h +++ b/config/examples/delta/generic/Configuration.h @@ -2163,6 +2163,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2302,7 +2305,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/delta/kossel_mini/Configuration.h b/config/examples/delta/kossel_mini/Configuration.h index 37348897ab..5ddb48e98a 100644 --- a/config/examples/delta/kossel_mini/Configuration.h +++ b/config/examples/delta/kossel_mini/Configuration.h @@ -2165,6 +2165,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2304,7 +2307,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/delta/kossel_pro/Configuration.h b/config/examples/delta/kossel_pro/Configuration.h index cb905a062a..179b13f63d 100644 --- a/config/examples/delta/kossel_pro/Configuration.h +++ b/config/examples/delta/kossel_pro/Configuration.h @@ -2164,6 +2164,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2303,7 +2306,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/delta/kossel_xl/Configuration.h b/config/examples/delta/kossel_xl/Configuration.h index 0dce152394..3c8fb421de 100644 --- a/config/examples/delta/kossel_xl/Configuration.h +++ b/config/examples/delta/kossel_xl/Configuration.h @@ -2166,6 +2166,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2305,7 +2308,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/gCreate/gMax1.5+/Configuration.h b/config/examples/gCreate/gMax1.5+/Configuration.h index dae25ca876..d2075575a8 100644 --- a/config/examples/gCreate/gMax1.5+/Configuration.h +++ b/config/examples/gCreate/gMax1.5+/Configuration.h @@ -2076,6 +2076,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2215,7 +2218,7 @@ */ #define NUM_SERVOS 2 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300, 300 } diff --git a/config/examples/makibox/Configuration.h b/config/examples/makibox/Configuration.h index 6519db161d..2ba9276334 100644 --- a/config/examples/makibox/Configuration.h +++ b/config/examples/makibox/Configuration.h @@ -2065,6 +2065,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2204,7 +2207,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/tvrrug/Round2/Configuration.h b/config/examples/tvrrug/Round2/Configuration.h index e9f633e9b4..51ec8f4982 100644 --- a/config/examples/tvrrug/Round2/Configuration.h +++ b/config/examples/tvrrug/Round2/Configuration.h @@ -2057,6 +2057,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2196,7 +2199,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } diff --git a/config/examples/wt150/Configuration.h b/config/examples/wt150/Configuration.h index 465d76f5a7..7f63ff6477 100644 --- a/config/examples/wt150/Configuration.h +++ b/config/examples/wt150/Configuration.h @@ -2067,6 +2067,9 @@ // //#define TOUCH_BUTTONS #if ENABLED(TOUCH_BUTTONS) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define XPT2046_X_CALIBRATION 12316 #define XPT2046_Y_CALIBRATION -8981 #define XPT2046_X_OFFSET -43 @@ -2206,7 +2209,7 @@ */ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 }