Remove trailing whitespace
This commit is contained in:
parent
7462fe3068
commit
d2e0c03afb
Marlin
config
default
examples
3DFabXYZ/Migbot
AlephObjects/TAZ4
AliExpress/UM2pExt
Anet
AnyCubic/i3
ArmEd
BIBO/TouchX
BQ
Cartesio
Creality
CR-10
CR-10S
CR-10_5S
CR-10mini
CR-8
Ender-2
Ender-3
Ender-4
Einstart-S
Felix
FlashForge/CreatorPro
FolgerTech/i3-2020
Formbot
Geeetech
A10M
A20M
MeCreator2
Prusa i3 Pro C
Prusa i3 Pro W
Infitary/i3-M508
JGAurora/A5
MakerParts
Malyan
Micromake/C1/enhanced
Mks
RapideLite/RL200
RigidBot
SCARA
Sanguinololu
TheBorg
TinyBoy2
Tronxy
UltiMachine
VORONDesign
Velleman
WASP/PowerWASP
Wanhao/Duplicator 6
delta
Anycubic/Kossel
FLSUN
Geeetech/Rostock 301
MKS/SBASE
Tevo Little Monster
generic
kossel_mini
kossel_xl
gCreate/gMax1.5+
makibox
tvrrug/Round2
wt150
@ -404,20 +404,20 @@
|
||||
* The inactive carriage is parked automatically to prevent oozing.
|
||||
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
|
||||
* By default the X2 stepper is assigned to the first unused E plug on the board.
|
||||
*
|
||||
*
|
||||
* The following Dual X Carriage modes can be selected with M605 S<mode>:
|
||||
*
|
||||
*
|
||||
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
|
||||
* results as long as it supports dual X-carriages. (M605 S0)
|
||||
*
|
||||
*
|
||||
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
|
||||
* that additional slicer support is not required. (M605 S1)
|
||||
*
|
||||
*
|
||||
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
|
||||
* the first X-carriage and extruder, to print 2 copies of the same object at the same time.
|
||||
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
* follow with M605 S2 to initiate duplicated movement.
|
||||
*
|
||||
*
|
||||
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
|
||||
* the movement of the first except the second extruder is reversed in the X axis.
|
||||
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
|
@ -404,20 +404,20 @@
|
||||
* The inactive carriage is parked automatically to prevent oozing.
|
||||
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
|
||||
* By default the X2 stepper is assigned to the first unused E plug on the board.
|
||||
*
|
||||
*
|
||||
* The following Dual X Carriage modes can be selected with M605 S<mode>:
|
||||
*
|
||||
*
|
||||
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
|
||||
* results as long as it supports dual X-carriages. (M605 S0)
|
||||
*
|
||||
*
|
||||
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
|
||||
* that additional slicer support is not required. (M605 S1)
|
||||
*
|
||||
*
|
||||
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
|
||||
* the first X-carriage and extruder, to print 2 copies of the same object at the same time.
|
||||
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
* follow with M605 S2 to initiate duplicated movement.
|
||||
*
|
||||
*
|
||||
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
|
||||
* the movement of the first except the second extruder is reversed in the X axis.
|
||||
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
|
@ -404,20 +404,20 @@
|
||||
* The inactive carriage is parked automatically to prevent oozing.
|
||||
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
|
||||
* By default the X2 stepper is assigned to the first unused E plug on the board.
|
||||
*
|
||||
*
|
||||
* The following Dual X Carriage modes can be selected with M605 S<mode>:
|
||||
*
|
||||
*
|
||||
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
|
||||
* results as long as it supports dual X-carriages. (M605 S0)
|
||||
*
|
||||
*
|
||||
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
|
||||
* that additional slicer support is not required. (M605 S1)
|
||||
*
|
||||
*
|
||||
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
|
||||
* the first X-carriage and extruder, to print 2 copies of the same object at the same time.
|
||||
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
* follow with M605 S2 to initiate duplicated movement.
|
||||
*
|
||||
*
|
||||
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
|
||||
* the movement of the first except the second extruder is reversed in the X axis.
|
||||
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
|
@ -404,20 +404,20 @@
|
||||
* The inactive carriage is parked automatically to prevent oozing.
|
||||
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
|
||||
* By default the X2 stepper is assigned to the first unused E plug on the board.
|
||||
*
|
||||
*
|
||||
* The following Dual X Carriage modes can be selected with M605 S<mode>:
|
||||
*
|
||||
*
|
||||
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
|
||||
* results as long as it supports dual X-carriages. (M605 S0)
|
||||
*
|
||||
*
|
||||
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
|
||||
* that additional slicer support is not required. (M605 S1)
|
||||
*
|
||||
*
|
||||
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
|
||||
* the first X-carriage and extruder, to print 2 copies of the same object at the same time.
|
||||
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
* follow with M605 S2 to initiate duplicated movement.
|
||||
*
|
||||
*
|
||||
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
|
||||
* the movement of the first except the second extruder is reversed in the X axis.
|
||||
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
|
@ -404,20 +404,20 @@
|
||||
* The inactive carriage is parked automatically to prevent oozing.
|
||||
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
|
||||
* By default the X2 stepper is assigned to the first unused E plug on the board.
|
||||
*
|
||||
*
|
||||
* The following Dual X Carriage modes can be selected with M605 S<mode>:
|
||||
*
|
||||
*
|
||||
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
|
||||
* results as long as it supports dual X-carriages. (M605 S0)
|
||||
*
|
||||
*
|
||||
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
|
||||
* that additional slicer support is not required. (M605 S1)
|
||||
*
|
||||
*
|
||||
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
|
||||
* the first X-carriage and extruder, to print 2 copies of the same object at the same time.
|
||||
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
* follow with M605 S2 to initiate duplicated movement.
|
||||
*
|
||||
*
|
||||
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
|
||||
* the movement of the first except the second extruder is reversed in the X axis.
|
||||
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
|
@ -404,20 +404,20 @@
|
||||
* The inactive carriage is parked automatically to prevent oozing.
|
||||
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
|
||||
* By default the X2 stepper is assigned to the first unused E plug on the board.
|
||||
*
|
||||
*
|
||||
* The following Dual X Carriage modes can be selected with M605 S<mode>:
|
||||
*
|
||||
*
|
||||
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
|
||||
* results as long as it supports dual X-carriages. (M605 S0)
|
||||
*
|
||||
*
|
||||
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
|
||||
* that additional slicer support is not required. (M605 S1)
|
||||
*
|
||||
*
|
||||
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
|
||||
* the first X-carriage and extruder, to print 2 copies of the same object at the same time.
|
||||
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
* follow with M605 S2 to initiate duplicated movement.
|
||||
*
|
||||
*
|
||||
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
|
||||
* the movement of the first except the second extruder is reversed in the X axis.
|
||||
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
|
@ -404,20 +404,20 @@
|
||||
* The inactive carriage is parked automatically to prevent oozing.
|
||||
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
|
||||
* By default the X2 stepper is assigned to the first unused E plug on the board.
|
||||
*
|
||||
*
|
||||
* The following Dual X Carriage modes can be selected with M605 S<mode>:
|
||||
*
|
||||
*
|
||||
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
|
||||
* results as long as it supports dual X-carriages. (M605 S0)
|
||||
*
|
||||
*
|
||||
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
|
||||
* that additional slicer support is not required. (M605 S1)
|
||||
*
|
||||
*
|
||||
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
|
||||
* the first X-carriage and extruder, to print 2 copies of the same object at the same time.
|
||||
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
* follow with M605 S2 to initiate duplicated movement.
|
||||
*
|
||||
*
|
||||
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
|
||||
* the movement of the first except the second extruder is reversed in the X axis.
|
||||
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
|
@ -404,20 +404,20 @@
|
||||
* The inactive carriage is parked automatically to prevent oozing.
|
||||
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
|
||||
* By default the X2 stepper is assigned to the first unused E plug on the board.
|
||||
*
|
||||
*
|
||||
* The following Dual X Carriage modes can be selected with M605 S<mode>:
|
||||
*
|
||||
*
|
||||
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
|
||||
* results as long as it supports dual X-carriages. (M605 S0)
|
||||
*
|
||||
*
|
||||
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
|
||||
* that additional slicer support is not required. (M605 S1)
|
||||
*
|
||||
*
|
||||
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
|
||||
* the first X-carriage and extruder, to print 2 copies of the same object at the same time.
|
||||
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
* follow with M605 S2 to initiate duplicated movement.
|
||||
*
|
||||
*
|
||||
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
|
||||
* the movement of the first except the second extruder is reversed in the X axis.
|
||||
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
|
@ -404,20 +404,20 @@
|
||||
* The inactive carriage is parked automatically to prevent oozing.
|
||||
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
|
||||
* By default the X2 stepper is assigned to the first unused E plug on the board.
|
||||
*
|
||||
*
|
||||
* The following Dual X Carriage modes can be selected with M605 S<mode>:
|
||||
*
|
||||
*
|
||||
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
|
||||
* results as long as it supports dual X-carriages. (M605 S0)
|
||||
*
|
||||
*
|
||||
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
|
||||
* that additional slicer support is not required. (M605 S1)
|
||||
*
|
||||
*
|
||||
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
|
||||
* the first X-carriage and extruder, to print 2 copies of the same object at the same time.
|
||||
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
* follow with M605 S2 to initiate duplicated movement.
|
||||
*
|
||||
*
|
||||
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
|
||||
* the movement of the first except the second extruder is reversed in the X axis.
|
||||
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
|
@ -404,20 +404,20 @@
|
||||
* The inactive carriage is parked automatically to prevent oozing.
|
||||
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
|
||||
* By default the X2 stepper is assigned to the first unused E plug on the board.
|
||||
*
|
||||
*
|
||||
* The following Dual X Carriage modes can be selected with M605 S<mode>:
|
||||
*
|
||||
*
|
||||
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
|
||||
* results as long as it supports dual X-carriages. (M605 S0)
|
||||
*
|
||||
*
|
||||
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
|
||||
* that additional slicer support is not required. (M605 S1)
|
||||
*
|
||||
*
|
||||
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
|
||||
* the first X-carriage and extruder, to print 2 copies of the same object at the same time.
|
||||
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
* follow with M605 S2 to initiate duplicated movement.
|
||||
*
|
||||
*
|
||||
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
|
||||
* the movement of the first except the second extruder is reversed in the X axis.
|
||||
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
|
@ -408,20 +408,20 @@
|
||||
* The inactive carriage is parked automatically to prevent oozing.
|
||||
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
|
||||
* By default the X2 stepper is assigned to the first unused E plug on the board.
|
||||
*
|
||||
*
|
||||
* The following Dual X Carriage modes can be selected with M605 S<mode>:
|
||||
*
|
||||
*
|
||||
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
|
||||
* results as long as it supports dual X-carriages. (M605 S0)
|
||||
*
|
||||
*
|
||||
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
|
||||
* that additional slicer support is not required. (M605 S1)
|
||||
*
|
||||
*
|
||||
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
|
||||
* the first X-carriage and extruder, to print 2 copies of the same object at the same time.
|
||||
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
* follow with M605 S2 to initiate duplicated movement.
|
||||
*
|
||||
*
|
||||
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
|
||||
* the movement of the first except the second extruder is reversed in the X axis.
|
||||
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
|
@ -404,20 +404,20 @@
|
||||
* The inactive carriage is parked automatically to prevent oozing.
|
||||
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
|
||||
* By default the X2 stepper is assigned to the first unused E plug on the board.
|
||||
*
|
||||
*
|
||||
* The following Dual X Carriage modes can be selected with M605 S<mode>:
|
||||
*
|
||||
*
|
||||
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
|
||||
* results as long as it supports dual X-carriages. (M605 S0)
|
||||
*
|
||||
*
|
||||
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
|
||||
* that additional slicer support is not required. (M605 S1)
|
||||
*
|
||||
*
|
||||
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
|
||||
* the first X-carriage and extruder, to print 2 copies of the same object at the same time.
|
||||
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
* follow with M605 S2 to initiate duplicated movement.
|
||||
*
|
||||
*
|
||||
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
|
||||
* the movement of the first except the second extruder is reversed in the X axis.
|
||||
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
|
@ -404,20 +404,20 @@
|
||||
* The inactive carriage is parked automatically to prevent oozing.
|
||||
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
|
||||
* By default the X2 stepper is assigned to the first unused E plug on the board.
|
||||
*
|
||||
*
|
||||
* The following Dual X Carriage modes can be selected with M605 S<mode>:
|
||||
*
|
||||
*
|
||||
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
|
||||
* results as long as it supports dual X-carriages. (M605 S0)
|
||||
*
|
||||
*
|
||||
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
|
||||
* that additional slicer support is not required. (M605 S1)
|
||||
*
|
||||
*
|
||||
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
|
||||
* the first X-carriage and extruder, to print 2 copies of the same object at the same time.
|
||||
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
* follow with M605 S2 to initiate duplicated movement.
|
||||
*
|
||||
*
|
||||
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
|
||||
* the movement of the first except the second extruder is reversed in the X axis.
|
||||
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
|
@ -404,20 +404,20 @@
|
||||
* The inactive carriage is parked automatically to prevent oozing.
|
||||
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
|
||||
* By default the X2 stepper is assigned to the first unused E plug on the board.
|
||||
*
|
||||
*
|
||||
* The following Dual X Carriage modes can be selected with M605 S<mode>:
|
||||
*
|
||||
*
|
||||
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
|
||||
* results as long as it supports dual X-carriages. (M605 S0)
|
||||
*
|
||||
*
|
||||
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
|
||||
* that additional slicer support is not required. (M605 S1)
|
||||
*
|
||||
*
|
||||
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
|
||||
* the first X-carriage and extruder, to print 2 copies of the same object at the same time.
|
||||
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
* follow with M605 S2 to initiate duplicated movement.
|
||||
*
|
||||
*
|
||||
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
|
||||
* the movement of the first except the second extruder is reversed in the X axis.
|
||||
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
|
@ -404,20 +404,20 @@
|
||||
* The inactive carriage is parked automatically to prevent oozing.
|
||||
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
|
||||
* By default the X2 stepper is assigned to the first unused E plug on the board.
|
||||
*
|
||||
*
|
||||
* The following Dual X Carriage modes can be selected with M605 S<mode>:
|
||||
*
|
||||
*
|
||||
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
|
||||
* results as long as it supports dual X-carriages. (M605 S0)
|
||||
*
|
||||
*
|
||||
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
|
||||
* that additional slicer support is not required. (M605 S1)
|
||||
*
|
||||
*
|
||||
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
|
||||
* the first X-carriage and extruder, to print 2 copies of the same object at the same time.
|
||||
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
* follow with M605 S2 to initiate duplicated movement.
|
||||
*
|
||||
*
|
||||
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
|
||||
* the movement of the first except the second extruder is reversed in the X axis.
|
||||
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
|
@ -404,20 +404,20 @@
|
||||
* The inactive carriage is parked automatically to prevent oozing.
|
||||
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
|
||||
* By default the X2 stepper is assigned to the first unused E plug on the board.
|
||||
*
|
||||
*
|
||||
* The following Dual X Carriage modes can be selected with M605 S<mode>:
|
||||
*
|
||||
*
|
||||
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
|
||||
* results as long as it supports dual X-carriages. (M605 S0)
|
||||
*
|
||||
*
|
||||
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
|
||||
* that additional slicer support is not required. (M605 S1)
|
||||
*
|
||||
*
|
||||
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
|
||||
* the first X-carriage and extruder, to print 2 copies of the same object at the same time.
|
||||
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
* follow with M605 S2 to initiate duplicated movement.
|
||||
*
|
||||
*
|
||||
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
|
||||
* the movement of the first except the second extruder is reversed in the X axis.
|
||||
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
|
@ -404,20 +404,20 @@
|
||||
* The inactive carriage is parked automatically to prevent oozing.
|
||||
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
|
||||
* By default the X2 stepper is assigned to the first unused E plug on the board.
|
||||
*
|
||||
*
|
||||
* The following Dual X Carriage modes can be selected with M605 S<mode>:
|
||||
*
|
||||
*
|
||||
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
|
||||
* results as long as it supports dual X-carriages. (M605 S0)
|
||||
*
|
||||
*
|
||||
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
|
||||
* that additional slicer support is not required. (M605 S1)
|
||||
*
|
||||
*
|
||||
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
|
||||
* the first X-carriage and extruder, to print 2 copies of the same object at the same time.
|
||||
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
* follow with M605 S2 to initiate duplicated movement.
|
||||
*
|
||||
*
|
||||
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
|
||||
* the movement of the first except the second extruder is reversed in the X axis.
|
||||
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
|
@ -404,20 +404,20 @@
|
||||
* The inactive carriage is parked automatically to prevent oozing.
|
||||
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
|
||||
* By default the X2 stepper is assigned to the first unused E plug on the board.
|
||||
*
|
||||
*
|
||||
* The following Dual X Carriage modes can be selected with M605 S<mode>:
|
||||
*
|
||||
*
|
||||
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
|
||||
* results as long as it supports dual X-carriages. (M605 S0)
|
||||
*
|
||||
*
|
||||
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
|
||||
* that additional slicer support is not required. (M605 S1)
|
||||
*
|
||||
*
|
||||
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
|
||||
* the first X-carriage and extruder, to print 2 copies of the same object at the same time.
|
||||
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
* follow with M605 S2 to initiate duplicated movement.
|
||||
*
|
||||
*
|
||||
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
|
||||
* the movement of the first except the second extruder is reversed in the X axis.
|
||||
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
|
@ -404,20 +404,20 @@
|
||||
* The inactive carriage is parked automatically to prevent oozing.
|
||||
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
|
||||
* By default the X2 stepper is assigned to the first unused E plug on the board.
|
||||
*
|
||||
*
|
||||
* The following Dual X Carriage modes can be selected with M605 S<mode>:
|
||||
*
|
||||
*
|
||||
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
|
||||
* results as long as it supports dual X-carriages. (M605 S0)
|
||||
*
|
||||
*
|
||||
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
|
||||
* that additional slicer support is not required. (M605 S1)
|
||||
*
|
||||
*
|
||||
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
|
||||
* the first X-carriage and extruder, to print 2 copies of the same object at the same time.
|
||||
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
* follow with M605 S2 to initiate duplicated movement.
|
||||
*
|
||||
*
|
||||
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
|
||||
* the movement of the first except the second extruder is reversed in the X axis.
|
||||
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
|
@ -404,20 +404,20 @@
|
||||
* The inactive carriage is parked automatically to prevent oozing.
|
||||
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
|
||||
* By default the X2 stepper is assigned to the first unused E plug on the board.
|
||||
*
|
||||
*
|
||||
* The following Dual X Carriage modes can be selected with M605 S<mode>:
|
||||
*
|
||||
*
|
||||
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
|
||||
* results as long as it supports dual X-carriages. (M605 S0)
|
||||
*
|
||||
*
|
||||
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
|
||||
* that additional slicer support is not required. (M605 S1)
|
||||
*
|
||||
*
|
||||
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
|
||||
* the first X-carriage and extruder, to print 2 copies of the same object at the same time.
|
||||
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
* follow with M605 S2 to initiate duplicated movement.
|
||||
*
|
||||
*
|
||||
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
|
||||
* the movement of the first except the second extruder is reversed in the X axis.
|
||||
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
|
@ -404,20 +404,20 @@
|
||||
* The inactive carriage is parked automatically to prevent oozing.
|
||||
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
|
||||
* By default the X2 stepper is assigned to the first unused E plug on the board.
|
||||
*
|
||||
*
|
||||
* The following Dual X Carriage modes can be selected with M605 S<mode>:
|
||||
*
|
||||
*
|
||||
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
|
||||
* results as long as it supports dual X-carriages. (M605 S0)
|
||||
*
|
||||
*
|
||||
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
|
||||
* that additional slicer support is not required. (M605 S1)
|
||||
*
|
||||
*
|
||||
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
|
||||
* the first X-carriage and extruder, to print 2 copies of the same object at the same time.
|
||||
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
* follow with M605 S2 to initiate duplicated movement.
|
||||
*
|
||||
*
|
||||
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
|
||||
* the movement of the first except the second extruder is reversed in the X axis.
|
||||
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
|
@ -404,20 +404,20 @@
|
||||
* The inactive carriage is parked automatically to prevent oozing.
|
||||
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
|
||||
* By default the X2 stepper is assigned to the first unused E plug on the board.
|
||||
*
|
||||
*
|
||||
* The following Dual X Carriage modes can be selected with M605 S<mode>:
|
||||
*
|
||||
*
|
||||
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
|
||||
* results as long as it supports dual X-carriages. (M605 S0)
|
||||
*
|
||||
*
|
||||
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
|
||||
* that additional slicer support is not required. (M605 S1)
|
||||
*
|
||||
*
|
||||
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
|
||||
* the first X-carriage and extruder, to print 2 copies of the same object at the same time.
|
||||
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
* follow with M605 S2 to initiate duplicated movement.
|
||||
*
|
||||
*
|
||||
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
|
||||
* the movement of the first except the second extruder is reversed in the X axis.
|
||||
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
|
@ -404,20 +404,20 @@
|
||||
* The inactive carriage is parked automatically to prevent oozing.
|
||||
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
|
||||
* By default the X2 stepper is assigned to the first unused E plug on the board.
|
||||
*
|
||||
*
|
||||
* The following Dual X Carriage modes can be selected with M605 S<mode>:
|
||||
*
|
||||
*
|
||||
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
|
||||
* results as long as it supports dual X-carriages. (M605 S0)
|
||||
*
|
||||
*
|
||||
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
|
||||
* that additional slicer support is not required. (M605 S1)
|
||||
*
|
||||
*
|
||||
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
|
||||
* the first X-carriage and extruder, to print 2 copies of the same object at the same time.
|
||||
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
* follow with M605 S2 to initiate duplicated movement.
|
||||
*
|
||||
*
|
||||
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
|
||||
* the movement of the first except the second extruder is reversed in the X axis.
|
||||
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
|
@ -404,20 +404,20 @@
|
||||
* The inactive carriage is parked automatically to prevent oozing.
|
||||
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
|
||||
* By default the X2 stepper is assigned to the first unused E plug on the board.
|
||||
*
|
||||
*
|
||||
* The following Dual X Carriage modes can be selected with M605 S<mode>:
|
||||
*
|
||||
*
|
||||
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
|
||||
* results as long as it supports dual X-carriages. (M605 S0)
|
||||
*
|
||||
*
|
||||
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
|
||||
* that additional slicer support is not required. (M605 S1)
|
||||
*
|
||||
*
|
||||
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
|
||||
* the first X-carriage and extruder, to print 2 copies of the same object at the same time.
|
||||
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
* follow with M605 S2 to initiate duplicated movement.
|
||||
*
|
||||
*
|
||||
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
|
||||
* the movement of the first except the second extruder is reversed in the X axis.
|
||||
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
|
@ -404,20 +404,20 @@
|
||||
* The inactive carriage is parked automatically to prevent oozing.
|
||||
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
|
||||
* By default the X2 stepper is assigned to the first unused E plug on the board.
|
||||
*
|
||||
*
|
||||
* The following Dual X Carriage modes can be selected with M605 S<mode>:
|
||||
*
|
||||
*
|
||||
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
|
||||
* results as long as it supports dual X-carriages. (M605 S0)
|
||||
*
|
||||
*
|
||||
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
|
||||
* that additional slicer support is not required. (M605 S1)
|
||||
*
|
||||
*
|
||||
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
|
||||
* the first X-carriage and extruder, to print 2 copies of the same object at the same time.
|
||||
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
* follow with M605 S2 to initiate duplicated movement.
|
||||
*
|
||||
*
|
||||
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
|
||||
* the movement of the first except the second extruder is reversed in the X axis.
|
||||
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
|
@ -404,20 +404,20 @@
|
||||
* The inactive carriage is parked automatically to prevent oozing.
|
||||
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
|
||||
* By default the X2 stepper is assigned to the first unused E plug on the board.
|
||||
*
|
||||
*
|
||||
* The following Dual X Carriage modes can be selected with M605 S<mode>:
|
||||
*
|
||||
*
|
||||
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
|
||||
* results as long as it supports dual X-carriages. (M605 S0)
|
||||
*
|
||||
*
|
||||
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
|
||||
* that additional slicer support is not required. (M605 S1)
|
||||
*
|
||||
*
|
||||
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
|
||||
* the first X-carriage and extruder, to print 2 copies of the same object at the same time.
|
||||
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
* follow with M605 S2 to initiate duplicated movement.
|
||||
*
|
||||
*
|
||||
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
|
||||
* the movement of the first except the second extruder is reversed in the X axis.
|
||||
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
|
@ -404,20 +404,20 @@
|
||||
* The inactive carriage is parked automatically to prevent oozing.
|
||||
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
|
||||
* By default the X2 stepper is assigned to the first unused E plug on the board.
|
||||
*
|
||||
*
|
||||
* The following Dual X Carriage modes can be selected with M605 S<mode>:
|
||||
*
|
||||
*
|
||||
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
|
||||
* results as long as it supports dual X-carriages. (M605 S0)
|
||||
*
|
||||
*
|
||||
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
|
||||
* that additional slicer support is not required. (M605 S1)
|
||||
*
|
||||
*
|
||||
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
|
||||
* the first X-carriage and extruder, to print 2 copies of the same object at the same time.
|
||||
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
* follow with M605 S2 to initiate duplicated movement.
|
||||
*
|
||||
*
|
||||
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
|
||||
* the movement of the first except the second extruder is reversed in the X axis.
|
||||
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
|
@ -404,20 +404,20 @@
|
||||
* The inactive carriage is parked automatically to prevent oozing.
|
||||
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
|
||||
* By default the X2 stepper is assigned to the first unused E plug on the board.
|
||||
*
|
||||
*
|
||||
* The following Dual X Carriage modes can be selected with M605 S<mode>:
|
||||
*
|
||||
*
|
||||
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
|
||||
* results as long as it supports dual X-carriages. (M605 S0)
|
||||
*
|
||||
*
|
||||
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
|
||||
* that additional slicer support is not required. (M605 S1)
|
||||
*
|
||||
*
|
||||
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
|
||||
* the first X-carriage and extruder, to print 2 copies of the same object at the same time.
|
||||
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
* follow with M605 S2 to initiate duplicated movement.
|
||||
*
|
||||
*
|
||||
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
|
||||
* the movement of the first except the second extruder is reversed in the X axis.
|
||||
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
|
@ -404,20 +404,20 @@
|
||||
* The inactive carriage is parked automatically to prevent oozing.
|
||||
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
|
||||
* By default the X2 stepper is assigned to the first unused E plug on the board.
|
||||
*
|
||||
*
|
||||
* The following Dual X Carriage modes can be selected with M605 S<mode>:
|
||||
*
|
||||
*
|
||||
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
|
||||
* results as long as it supports dual X-carriages. (M605 S0)
|
||||
*
|
||||
*
|
||||
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
|
||||
* that additional slicer support is not required. (M605 S1)
|
||||
*
|
||||
*
|
||||
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
|
||||
* the first X-carriage and extruder, to print 2 copies of the same object at the same time.
|
||||
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
* follow with M605 S2 to initiate duplicated movement.
|
||||
*
|
||||
*
|
||||
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
|
||||
* the movement of the first except the second extruder is reversed in the X axis.
|
||||
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
|
@ -404,20 +404,20 @@
|
||||
* The inactive carriage is parked automatically to prevent oozing.
|
||||
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
|
||||
* By default the X2 stepper is assigned to the first unused E plug on the board.
|
||||
*
|
||||
*
|
||||
* The following Dual X Carriage modes can be selected with M605 S<mode>:
|
||||
*
|
||||
*
|
||||
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
|
||||
* results as long as it supports dual X-carriages. (M605 S0)
|
||||
*
|
||||
*
|
||||
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
|
||||
* that additional slicer support is not required. (M605 S1)
|
||||
*
|
||||
*
|
||||
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
|
||||
* the first X-carriage and extruder, to print 2 copies of the same object at the same time.
|
||||
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
* follow with M605 S2 to initiate duplicated movement.
|
||||
*
|
||||
*
|
||||
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
|
||||
* the movement of the first except the second extruder is reversed in the X axis.
|
||||
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
|
@ -408,20 +408,20 @@
|
||||
* The inactive carriage is parked automatically to prevent oozing.
|
||||
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
|
||||
* By default the X2 stepper is assigned to the first unused E plug on the board.
|
||||
*
|
||||
*
|
||||
* The following Dual X Carriage modes can be selected with M605 S<mode>:
|
||||
*
|
||||
*
|
||||
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
|
||||
* results as long as it supports dual X-carriages. (M605 S0)
|
||||
*
|
||||
*
|
||||
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
|
||||
* that additional slicer support is not required. (M605 S1)
|
||||
*
|
||||
*
|
||||
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
|
||||
* the first X-carriage and extruder, to print 2 copies of the same object at the same time.
|
||||
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
* follow with M605 S2 to initiate duplicated movement.
|
||||
*
|
||||
*
|
||||
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
|
||||
* the movement of the first except the second extruder is reversed in the X axis.
|
||||
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
|
@ -408,20 +408,20 @@
|
||||
* The inactive carriage is parked automatically to prevent oozing.
|
||||
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
|
||||
* By default the X2 stepper is assigned to the first unused E plug on the board.
|
||||
*
|
||||
*
|
||||
* The following Dual X Carriage modes can be selected with M605 S<mode>:
|
||||
*
|
||||
*
|
||||
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
|
||||
* results as long as it supports dual X-carriages. (M605 S0)
|
||||
*
|
||||
*
|
||||
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
|
||||
* that additional slicer support is not required. (M605 S1)
|
||||
*
|
||||
*
|
||||
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
|
||||
* the first X-carriage and extruder, to print 2 copies of the same object at the same time.
|
||||
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
* follow with M605 S2 to initiate duplicated movement.
|
||||
*
|
||||
*
|
||||
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
|
||||
* the movement of the first except the second extruder is reversed in the X axis.
|
||||
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
|
@ -404,20 +404,20 @@
|
||||
* The inactive carriage is parked automatically to prevent oozing.
|
||||
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
|
||||
* By default the X2 stepper is assigned to the first unused E plug on the board.
|
||||
*
|
||||
*
|
||||
* The following Dual X Carriage modes can be selected with M605 S<mode>:
|
||||
*
|
||||
*
|
||||
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
|
||||
* results as long as it supports dual X-carriages. (M605 S0)
|
||||
*
|
||||
*
|
||||
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
|
||||
* that additional slicer support is not required. (M605 S1)
|
||||
*
|
||||
*
|
||||
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
|
||||
* the first X-carriage and extruder, to print 2 copies of the same object at the same time.
|
||||
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
* follow with M605 S2 to initiate duplicated movement.
|
||||
*
|
||||
*
|
||||
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
|
||||
* the movement of the first except the second extruder is reversed in the X axis.
|
||||
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
|
@ -404,20 +404,20 @@
|
||||
* The inactive carriage is parked automatically to prevent oozing.
|
||||
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
|
||||
* By default the X2 stepper is assigned to the first unused E plug on the board.
|
||||
*
|
||||
*
|
||||
* The following Dual X Carriage modes can be selected with M605 S<mode>:
|
||||
*
|
||||
*
|
||||
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
|
||||
* results as long as it supports dual X-carriages. (M605 S0)
|
||||
*
|
||||
*
|
||||
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
|
||||
* that additional slicer support is not required. (M605 S1)
|
||||
*
|
||||
*
|
||||
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
|
||||
* the first X-carriage and extruder, to print 2 copies of the same object at the same time.
|
||||
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
* follow with M605 S2 to initiate duplicated movement.
|
||||
*
|
||||
*
|
||||
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
|
||||
* the movement of the first except the second extruder is reversed in the X axis.
|
||||
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
|
@ -404,20 +404,20 @@
|
||||
* The inactive carriage is parked automatically to prevent oozing.
|
||||
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
|
||||
* By default the X2 stepper is assigned to the first unused E plug on the board.
|
||||
*
|
||||
*
|
||||
* The following Dual X Carriage modes can be selected with M605 S<mode>:
|
||||
*
|
||||
*
|
||||
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
|
||||
* results as long as it supports dual X-carriages. (M605 S0)
|
||||
*
|
||||
*
|
||||
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
|
||||
* that additional slicer support is not required. (M605 S1)
|
||||
*
|
||||
*
|
||||
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
|
||||
* the first X-carriage and extruder, to print 2 copies of the same object at the same time.
|
||||
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
* follow with M605 S2 to initiate duplicated movement.
|
||||
*
|
||||
*
|
||||
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
|
||||
* the movement of the first except the second extruder is reversed in the X axis.
|
||||
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
|
@ -404,20 +404,20 @@
|
||||
* The inactive carriage is parked automatically to prevent oozing.
|
||||
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
|
||||
* By default the X2 stepper is assigned to the first unused E plug on the board.
|
||||
*
|
||||
*
|
||||
* The following Dual X Carriage modes can be selected with M605 S<mode>:
|
||||
*
|
||||
*
|
||||
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
|
||||
* results as long as it supports dual X-carriages. (M605 S0)
|
||||
*
|
||||
*
|
||||
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
|
||||
* that additional slicer support is not required. (M605 S1)
|
||||
*
|
||||
*
|
||||
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
|
||||
* the first X-carriage and extruder, to print 2 copies of the same object at the same time.
|
||||
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
* follow with M605 S2 to initiate duplicated movement.
|
||||
*
|
||||
*
|
||||
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
|
||||
* the movement of the first except the second extruder is reversed in the X axis.
|
||||
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
|
@ -404,20 +404,20 @@
|
||||
* The inactive carriage is parked automatically to prevent oozing.
|
||||
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
|
||||
* By default the X2 stepper is assigned to the first unused E plug on the board.
|
||||
*
|
||||
*
|
||||
* The following Dual X Carriage modes can be selected with M605 S<mode>:
|
||||
*
|
||||
*
|
||||
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
|
||||
* results as long as it supports dual X-carriages. (M605 S0)
|
||||
*
|
||||
*
|
||||
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
|
||||
* that additional slicer support is not required. (M605 S1)
|
||||
*
|
||||
*
|
||||
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
|
||||
* the first X-carriage and extruder, to print 2 copies of the same object at the same time.
|
||||
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
* follow with M605 S2 to initiate duplicated movement.
|
||||
*
|
||||
*
|
||||
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
|
||||
* the movement of the first except the second extruder is reversed in the X axis.
|
||||
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
|
@ -404,20 +404,20 @@
|
||||
* The inactive carriage is parked automatically to prevent oozing.
|
||||
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
|
||||
* By default the X2 stepper is assigned to the first unused E plug on the board.
|
||||
*
|
||||
*
|
||||
* The following Dual X Carriage modes can be selected with M605 S<mode>:
|
||||
*
|
||||
*
|
||||
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
|
||||
* results as long as it supports dual X-carriages. (M605 S0)
|
||||
*
|
||||
*
|
||||
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
|
||||
* that additional slicer support is not required. (M605 S1)
|
||||
*
|
||||
*
|
||||
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
|
||||
* the first X-carriage and extruder, to print 2 copies of the same object at the same time.
|
||||
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
* follow with M605 S2 to initiate duplicated movement.
|
||||
*
|
||||
*
|
||||
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
|
||||
* the movement of the first except the second extruder is reversed in the X axis.
|
||||
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
|
@ -404,20 +404,20 @@
|
||||
* The inactive carriage is parked automatically to prevent oozing.
|
||||
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
|
||||
* By default the X2 stepper is assigned to the first unused E plug on the board.
|
||||
*
|
||||
*
|
||||
* The following Dual X Carriage modes can be selected with M605 S<mode>:
|
||||
*
|
||||
*
|
||||
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
|
||||
* results as long as it supports dual X-carriages. (M605 S0)
|
||||
*
|
||||
*
|
||||
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
|
||||
* that additional slicer support is not required. (M605 S1)
|
||||
*
|
||||
*
|
||||
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
|
||||
* the first X-carriage and extruder, to print 2 copies of the same object at the same time.
|
||||
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
* follow with M605 S2 to initiate duplicated movement.
|
||||
*
|
||||
*
|
||||
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
|
||||
* the movement of the first except the second extruder is reversed in the X axis.
|
||||
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
|
@ -404,20 +404,20 @@
|
||||
* The inactive carriage is parked automatically to prevent oozing.
|
||||
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
|
||||
* By default the X2 stepper is assigned to the first unused E plug on the board.
|
||||
*
|
||||
*
|
||||
* The following Dual X Carriage modes can be selected with M605 S<mode>:
|
||||
*
|
||||
*
|
||||
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
|
||||
* results as long as it supports dual X-carriages. (M605 S0)
|
||||
*
|
||||
*
|
||||
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
|
||||
* that additional slicer support is not required. (M605 S1)
|
||||
*
|
||||
*
|
||||
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
|
||||
* the first X-carriage and extruder, to print 2 copies of the same object at the same time.
|
||||
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
* follow with M605 S2 to initiate duplicated movement.
|
||||
*
|
||||
*
|
||||
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
|
||||
* the movement of the first except the second extruder is reversed in the X axis.
|
||||
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
|
@ -404,20 +404,20 @@
|
||||
* The inactive carriage is parked automatically to prevent oozing.
|
||||
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
|
||||
* By default the X2 stepper is assigned to the first unused E plug on the board.
|
||||
*
|
||||
*
|
||||
* The following Dual X Carriage modes can be selected with M605 S<mode>:
|
||||
*
|
||||
*
|
||||
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
|
||||
* results as long as it supports dual X-carriages. (M605 S0)
|
||||
*
|
||||
*
|
||||
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
|
||||
* that additional slicer support is not required. (M605 S1)
|
||||
*
|
||||
*
|
||||
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
|
||||
* the first X-carriage and extruder, to print 2 copies of the same object at the same time.
|
||||
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
* follow with M605 S2 to initiate duplicated movement.
|
||||
*
|
||||
*
|
||||
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
|
||||
* the movement of the first except the second extruder is reversed in the X axis.
|
||||
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
|
@ -404,20 +404,20 @@
|
||||
* The inactive carriage is parked automatically to prevent oozing.
|
||||
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
|
||||
* By default the X2 stepper is assigned to the first unused E plug on the board.
|
||||
*
|
||||
*
|
||||
* The following Dual X Carriage modes can be selected with M605 S<mode>:
|
||||
*
|
||||
*
|
||||
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
|
||||
* results as long as it supports dual X-carriages. (M605 S0)
|
||||
*
|
||||
*
|
||||
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
|
||||
* that additional slicer support is not required. (M605 S1)
|
||||
*
|
||||
*
|
||||
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
|
||||
* the first X-carriage and extruder, to print 2 copies of the same object at the same time.
|
||||
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
* follow with M605 S2 to initiate duplicated movement.
|
||||
*
|
||||
*
|
||||
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
|
||||
* the movement of the first except the second extruder is reversed in the X axis.
|
||||
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
|
@ -404,20 +404,20 @@
|
||||
* The inactive carriage is parked automatically to prevent oozing.
|
||||
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
|
||||
* By default the X2 stepper is assigned to the first unused E plug on the board.
|
||||
*
|
||||
*
|
||||
* The following Dual X Carriage modes can be selected with M605 S<mode>:
|
||||
*
|
||||
*
|
||||
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
|
||||
* results as long as it supports dual X-carriages. (M605 S0)
|
||||
*
|
||||
*
|
||||
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
|
||||
* that additional slicer support is not required. (M605 S1)
|
||||
*
|
||||
*
|
||||
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
|
||||
* the first X-carriage and extruder, to print 2 copies of the same object at the same time.
|
||||
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
* follow with M605 S2 to initiate duplicated movement.
|
||||
*
|
||||
*
|
||||
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
|
||||
* the movement of the first except the second extruder is reversed in the X axis.
|
||||
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
|
@ -404,20 +404,20 @@
|
||||
* The inactive carriage is parked automatically to prevent oozing.
|
||||
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
|
||||
* By default the X2 stepper is assigned to the first unused E plug on the board.
|
||||
*
|
||||
*
|
||||
* The following Dual X Carriage modes can be selected with M605 S<mode>:
|
||||
*
|
||||
*
|
||||
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
|
||||
* results as long as it supports dual X-carriages. (M605 S0)
|
||||
*
|
||||
*
|
||||
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
|
||||
* that additional slicer support is not required. (M605 S1)
|
||||
*
|
||||
*
|
||||
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
|
||||
* the first X-carriage and extruder, to print 2 copies of the same object at the same time.
|
||||
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
* follow with M605 S2 to initiate duplicated movement.
|
||||
*
|
||||
*
|
||||
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
|
||||
* the movement of the first except the second extruder is reversed in the X axis.
|
||||
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
|
@ -404,20 +404,20 @@
|
||||
* The inactive carriage is parked automatically to prevent oozing.
|
||||
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
|
||||
* By default the X2 stepper is assigned to the first unused E plug on the board.
|
||||
*
|
||||
*
|
||||
* The following Dual X Carriage modes can be selected with M605 S<mode>:
|
||||
*
|
||||
*
|
||||
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
|
||||
* results as long as it supports dual X-carriages. (M605 S0)
|
||||
*
|
||||
*
|
||||
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
|
||||
* that additional slicer support is not required. (M605 S1)
|
||||
*
|
||||
*
|
||||
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
|
||||
* the first X-carriage and extruder, to print 2 copies of the same object at the same time.
|
||||
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
* follow with M605 S2 to initiate duplicated movement.
|
||||
*
|
||||
*
|
||||
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
|
||||
* the movement of the first except the second extruder is reversed in the X axis.
|
||||
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
|
@ -404,20 +404,20 @@
|
||||
* The inactive carriage is parked automatically to prevent oozing.
|
||||
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
|
||||
* By default the X2 stepper is assigned to the first unused E plug on the board.
|
||||
*
|
||||
*
|
||||
* The following Dual X Carriage modes can be selected with M605 S<mode>:
|
||||
*
|
||||
*
|
||||
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
|
||||
* results as long as it supports dual X-carriages. (M605 S0)
|
||||
*
|
||||
*
|
||||
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
|
||||
* that additional slicer support is not required. (M605 S1)
|
||||
*
|
||||
*
|
||||
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
|
||||
* the first X-carriage and extruder, to print 2 copies of the same object at the same time.
|
||||
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
* follow with M605 S2 to initiate duplicated movement.
|
||||
*
|
||||
*
|
||||
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
|
||||
* the movement of the first except the second extruder is reversed in the X axis.
|
||||
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
|
@ -404,20 +404,20 @@
|
||||
* The inactive carriage is parked automatically to prevent oozing.
|
||||
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
|
||||
* By default the X2 stepper is assigned to the first unused E plug on the board.
|
||||
*
|
||||
*
|
||||
* The following Dual X Carriage modes can be selected with M605 S<mode>:
|
||||
*
|
||||
*
|
||||
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
|
||||
* results as long as it supports dual X-carriages. (M605 S0)
|
||||
*
|
||||
*
|
||||
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
|
||||
* that additional slicer support is not required. (M605 S1)
|
||||
*
|
||||
*
|
||||
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
|
||||
* the first X-carriage and extruder, to print 2 copies of the same object at the same time.
|
||||
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
* follow with M605 S2 to initiate duplicated movement.
|
||||
*
|
||||
*
|
||||
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
|
||||
* the movement of the first except the second extruder is reversed in the X axis.
|
||||
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
|
@ -404,20 +404,20 @@
|
||||
* The inactive carriage is parked automatically to prevent oozing.
|
||||
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
|
||||
* By default the X2 stepper is assigned to the first unused E plug on the board.
|
||||
*
|
||||
*
|
||||
* The following Dual X Carriage modes can be selected with M605 S<mode>:
|
||||
*
|
||||
*
|
||||
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
|
||||
* results as long as it supports dual X-carriages. (M605 S0)
|
||||
*
|
||||
*
|
||||
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
|
||||
* that additional slicer support is not required. (M605 S1)
|
||||
*
|
||||
*
|
||||
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
|
||||
* the first X-carriage and extruder, to print 2 copies of the same object at the same time.
|
||||
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
* follow with M605 S2 to initiate duplicated movement.
|
||||
*
|
||||
*
|
||||
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
|
||||
* the movement of the first except the second extruder is reversed in the X axis.
|
||||
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
|
@ -404,20 +404,20 @@
|
||||
* The inactive carriage is parked automatically to prevent oozing.
|
||||
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
|
||||
* By default the X2 stepper is assigned to the first unused E plug on the board.
|
||||
*
|
||||
*
|
||||
* The following Dual X Carriage modes can be selected with M605 S<mode>:
|
||||
*
|
||||
*
|
||||
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
|
||||
* results as long as it supports dual X-carriages. (M605 S0)
|
||||
*
|
||||
*
|
||||
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
|
||||
* that additional slicer support is not required. (M605 S1)
|
||||
*
|
||||
*
|
||||
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
|
||||
* the first X-carriage and extruder, to print 2 copies of the same object at the same time.
|
||||
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
* follow with M605 S2 to initiate duplicated movement.
|
||||
*
|
||||
*
|
||||
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
|
||||
* the movement of the first except the second extruder is reversed in the X axis.
|
||||
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
|
@ -404,20 +404,20 @@
|
||||
* The inactive carriage is parked automatically to prevent oozing.
|
||||
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
|
||||
* By default the X2 stepper is assigned to the first unused E plug on the board.
|
||||
*
|
||||
*
|
||||
* The following Dual X Carriage modes can be selected with M605 S<mode>:
|
||||
*
|
||||
*
|
||||
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
|
||||
* results as long as it supports dual X-carriages. (M605 S0)
|
||||
*
|
||||
*
|
||||
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
|
||||
* that additional slicer support is not required. (M605 S1)
|
||||
*
|
||||
*
|
||||
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
|
||||
* the first X-carriage and extruder, to print 2 copies of the same object at the same time.
|
||||
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
* follow with M605 S2 to initiate duplicated movement.
|
||||
*
|
||||
*
|
||||
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
|
||||
* the movement of the first except the second extruder is reversed in the X axis.
|
||||
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
|
@ -404,20 +404,20 @@
|
||||
* The inactive carriage is parked automatically to prevent oozing.
|
||||
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
|
||||
* By default the X2 stepper is assigned to the first unused E plug on the board.
|
||||
*
|
||||
*
|
||||
* The following Dual X Carriage modes can be selected with M605 S<mode>:
|
||||
*
|
||||
*
|
||||
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
|
||||
* results as long as it supports dual X-carriages. (M605 S0)
|
||||
*
|
||||
*
|
||||
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
|
||||
* that additional slicer support is not required. (M605 S1)
|
||||
*
|
||||
*
|
||||
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
|
||||
* the first X-carriage and extruder, to print 2 copies of the same object at the same time.
|
||||
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
* follow with M605 S2 to initiate duplicated movement.
|
||||
*
|
||||
*
|
||||
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
|
||||
* the movement of the first except the second extruder is reversed in the X axis.
|
||||
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
|
@ -404,20 +404,20 @@
|
||||
* The inactive carriage is parked automatically to prevent oozing.
|
||||
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
|
||||
* By default the X2 stepper is assigned to the first unused E plug on the board.
|
||||
*
|
||||
*
|
||||
* The following Dual X Carriage modes can be selected with M605 S<mode>:
|
||||
*
|
||||
*
|
||||
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
|
||||
* results as long as it supports dual X-carriages. (M605 S0)
|
||||
*
|
||||
*
|
||||
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
|
||||
* that additional slicer support is not required. (M605 S1)
|
||||
*
|
||||
*
|
||||
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
|
||||
* the first X-carriage and extruder, to print 2 copies of the same object at the same time.
|
||||
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
* follow with M605 S2 to initiate duplicated movement.
|
||||
*
|
||||
*
|
||||
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
|
||||
* the movement of the first except the second extruder is reversed in the X axis.
|
||||
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
|
@ -404,20 +404,20 @@
|
||||
* The inactive carriage is parked automatically to prevent oozing.
|
||||
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
|
||||
* By default the X2 stepper is assigned to the first unused E plug on the board.
|
||||
*
|
||||
*
|
||||
* The following Dual X Carriage modes can be selected with M605 S<mode>:
|
||||
*
|
||||
*
|
||||
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
|
||||
* results as long as it supports dual X-carriages. (M605 S0)
|
||||
*
|
||||
*
|
||||
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
|
||||
* that additional slicer support is not required. (M605 S1)
|
||||
*
|
||||
*
|
||||
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
|
||||
* the first X-carriage and extruder, to print 2 copies of the same object at the same time.
|
||||
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
* follow with M605 S2 to initiate duplicated movement.
|
||||
*
|
||||
*
|
||||
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
|
||||
* the movement of the first except the second extruder is reversed in the X axis.
|
||||
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
|
@ -404,20 +404,20 @@
|
||||
* The inactive carriage is parked automatically to prevent oozing.
|
||||
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
|
||||
* By default the X2 stepper is assigned to the first unused E plug on the board.
|
||||
*
|
||||
*
|
||||
* The following Dual X Carriage modes can be selected with M605 S<mode>:
|
||||
*
|
||||
*
|
||||
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
|
||||
* results as long as it supports dual X-carriages. (M605 S0)
|
||||
*
|
||||
*
|
||||
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
|
||||
* that additional slicer support is not required. (M605 S1)
|
||||
*
|
||||
*
|
||||
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
|
||||
* the first X-carriage and extruder, to print 2 copies of the same object at the same time.
|
||||
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
* follow with M605 S2 to initiate duplicated movement.
|
||||
*
|
||||
*
|
||||
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
|
||||
* the movement of the first except the second extruder is reversed in the X axis.
|
||||
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
|
@ -404,20 +404,20 @@
|
||||
* The inactive carriage is parked automatically to prevent oozing.
|
||||
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
|
||||
* By default the X2 stepper is assigned to the first unused E plug on the board.
|
||||
*
|
||||
*
|
||||
* The following Dual X Carriage modes can be selected with M605 S<mode>:
|
||||
*
|
||||
*
|
||||
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
|
||||
* results as long as it supports dual X-carriages. (M605 S0)
|
||||
*
|
||||
*
|
||||
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
|
||||
* that additional slicer support is not required. (M605 S1)
|
||||
*
|
||||
*
|
||||
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
|
||||
* the first X-carriage and extruder, to print 2 copies of the same object at the same time.
|
||||
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
* follow with M605 S2 to initiate duplicated movement.
|
||||
*
|
||||
*
|
||||
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
|
||||
* the movement of the first except the second extruder is reversed in the X axis.
|
||||
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
|
@ -404,20 +404,20 @@
|
||||
* The inactive carriage is parked automatically to prevent oozing.
|
||||
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
|
||||
* By default the X2 stepper is assigned to the first unused E plug on the board.
|
||||
*
|
||||
*
|
||||
* The following Dual X Carriage modes can be selected with M605 S<mode>:
|
||||
*
|
||||
*
|
||||
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
|
||||
* results as long as it supports dual X-carriages. (M605 S0)
|
||||
*
|
||||
*
|
||||
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
|
||||
* that additional slicer support is not required. (M605 S1)
|
||||
*
|
||||
*
|
||||
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
|
||||
* the first X-carriage and extruder, to print 2 copies of the same object at the same time.
|
||||
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
* follow with M605 S2 to initiate duplicated movement.
|
||||
*
|
||||
*
|
||||
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
|
||||
* the movement of the first except the second extruder is reversed in the X axis.
|
||||
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
|
@ -417,20 +417,20 @@
|
||||
* The inactive carriage is parked automatically to prevent oozing.
|
||||
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
|
||||
* By default the X2 stepper is assigned to the first unused E plug on the board.
|
||||
*
|
||||
*
|
||||
* The following Dual X Carriage modes can be selected with M605 S<mode>:
|
||||
*
|
||||
*
|
||||
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
|
||||
* results as long as it supports dual X-carriages. (M605 S0)
|
||||
*
|
||||
*
|
||||
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
|
||||
* that additional slicer support is not required. (M605 S1)
|
||||
*
|
||||
*
|
||||
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
|
||||
* the first X-carriage and extruder, to print 2 copies of the same object at the same time.
|
||||
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
* follow with M605 S2 to initiate duplicated movement.
|
||||
*
|
||||
*
|
||||
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
|
||||
* the movement of the first except the second extruder is reversed in the X axis.
|
||||
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
|
@ -404,20 +404,20 @@
|
||||
* The inactive carriage is parked automatically to prevent oozing.
|
||||
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
|
||||
* By default the X2 stepper is assigned to the first unused E plug on the board.
|
||||
*
|
||||
*
|
||||
* The following Dual X Carriage modes can be selected with M605 S<mode>:
|
||||
*
|
||||
*
|
||||
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
|
||||
* results as long as it supports dual X-carriages. (M605 S0)
|
||||
*
|
||||
*
|
||||
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
|
||||
* that additional slicer support is not required. (M605 S1)
|
||||
*
|
||||
*
|
||||
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
|
||||
* the first X-carriage and extruder, to print 2 copies of the same object at the same time.
|
||||
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
* follow with M605 S2 to initiate duplicated movement.
|
||||
*
|
||||
*
|
||||
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
|
||||
* the movement of the first except the second extruder is reversed in the X axis.
|
||||
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
|
@ -404,20 +404,20 @@
|
||||
* The inactive carriage is parked automatically to prevent oozing.
|
||||
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
|
||||
* By default the X2 stepper is assigned to the first unused E plug on the board.
|
||||
*
|
||||
*
|
||||
* The following Dual X Carriage modes can be selected with M605 S<mode>:
|
||||
*
|
||||
*
|
||||
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
|
||||
* results as long as it supports dual X-carriages. (M605 S0)
|
||||
*
|
||||
*
|
||||
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
|
||||
* that additional slicer support is not required. (M605 S1)
|
||||
*
|
||||
*
|
||||
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
|
||||
* the first X-carriage and extruder, to print 2 copies of the same object at the same time.
|
||||
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
* follow with M605 S2 to initiate duplicated movement.
|
||||
*
|
||||
*
|
||||
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
|
||||
* the movement of the first except the second extruder is reversed in the X axis.
|
||||
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
|
@ -404,20 +404,20 @@
|
||||
* The inactive carriage is parked automatically to prevent oozing.
|
||||
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
|
||||
* By default the X2 stepper is assigned to the first unused E plug on the board.
|
||||
*
|
||||
*
|
||||
* The following Dual X Carriage modes can be selected with M605 S<mode>:
|
||||
*
|
||||
*
|
||||
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
|
||||
* results as long as it supports dual X-carriages. (M605 S0)
|
||||
*
|
||||
*
|
||||
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
|
||||
* that additional slicer support is not required. (M605 S1)
|
||||
*
|
||||
*
|
||||
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
|
||||
* the first X-carriage and extruder, to print 2 copies of the same object at the same time.
|
||||
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
* follow with M605 S2 to initiate duplicated movement.
|
||||
*
|
||||
*
|
||||
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
|
||||
* the movement of the first except the second extruder is reversed in the X axis.
|
||||
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
|
@ -404,20 +404,20 @@
|
||||
* The inactive carriage is parked automatically to prevent oozing.
|
||||
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
|
||||
* By default the X2 stepper is assigned to the first unused E plug on the board.
|
||||
*
|
||||
*
|
||||
* The following Dual X Carriage modes can be selected with M605 S<mode>:
|
||||
*
|
||||
*
|
||||
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
|
||||
* results as long as it supports dual X-carriages. (M605 S0)
|
||||
*
|
||||
*
|
||||
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
|
||||
* that additional slicer support is not required. (M605 S1)
|
||||
*
|
||||
*
|
||||
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
|
||||
* the first X-carriage and extruder, to print 2 copies of the same object at the same time.
|
||||
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
* follow with M605 S2 to initiate duplicated movement.
|
||||
*
|
||||
*
|
||||
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
|
||||
* the movement of the first except the second extruder is reversed in the X axis.
|
||||
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
|
@ -404,20 +404,20 @@
|
||||
* The inactive carriage is parked automatically to prevent oozing.
|
||||
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
|
||||
* By default the X2 stepper is assigned to the first unused E plug on the board.
|
||||
*
|
||||
*
|
||||
* The following Dual X Carriage modes can be selected with M605 S<mode>:
|
||||
*
|
||||
*
|
||||
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
|
||||
* results as long as it supports dual X-carriages. (M605 S0)
|
||||
*
|
||||
*
|
||||
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
|
||||
* that additional slicer support is not required. (M605 S1)
|
||||
*
|
||||
*
|
||||
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
|
||||
* the first X-carriage and extruder, to print 2 copies of the same object at the same time.
|
||||
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
* follow with M605 S2 to initiate duplicated movement.
|
||||
*
|
||||
*
|
||||
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
|
||||
* the movement of the first except the second extruder is reversed in the X axis.
|
||||
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
|
@ -404,20 +404,20 @@
|
||||
* The inactive carriage is parked automatically to prevent oozing.
|
||||
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
|
||||
* By default the X2 stepper is assigned to the first unused E plug on the board.
|
||||
*
|
||||
*
|
||||
* The following Dual X Carriage modes can be selected with M605 S<mode>:
|
||||
*
|
||||
*
|
||||
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
|
||||
* results as long as it supports dual X-carriages. (M605 S0)
|
||||
*
|
||||
*
|
||||
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
|
||||
* that additional slicer support is not required. (M605 S1)
|
||||
*
|
||||
*
|
||||
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
|
||||
* the first X-carriage and extruder, to print 2 copies of the same object at the same time.
|
||||
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
* follow with M605 S2 to initiate duplicated movement.
|
||||
*
|
||||
*
|
||||
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
|
||||
* the movement of the first except the second extruder is reversed in the X axis.
|
||||
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
|
@ -404,20 +404,20 @@
|
||||
* The inactive carriage is parked automatically to prevent oozing.
|
||||
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
|
||||
* By default the X2 stepper is assigned to the first unused E plug on the board.
|
||||
*
|
||||
*
|
||||
* The following Dual X Carriage modes can be selected with M605 S<mode>:
|
||||
*
|
||||
*
|
||||
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
|
||||
* results as long as it supports dual X-carriages. (M605 S0)
|
||||
*
|
||||
*
|
||||
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
|
||||
* that additional slicer support is not required. (M605 S1)
|
||||
*
|
||||
*
|
||||
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
|
||||
* the first X-carriage and extruder, to print 2 copies of the same object at the same time.
|
||||
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
* follow with M605 S2 to initiate duplicated movement.
|
||||
*
|
||||
*
|
||||
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
|
||||
* the movement of the first except the second extruder is reversed in the X axis.
|
||||
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
|
@ -404,20 +404,20 @@
|
||||
* The inactive carriage is parked automatically to prevent oozing.
|
||||
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
|
||||
* By default the X2 stepper is assigned to the first unused E plug on the board.
|
||||
*
|
||||
*
|
||||
* The following Dual X Carriage modes can be selected with M605 S<mode>:
|
||||
*
|
||||
*
|
||||
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
|
||||
* results as long as it supports dual X-carriages. (M605 S0)
|
||||
*
|
||||
*
|
||||
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
|
||||
* that additional slicer support is not required. (M605 S1)
|
||||
*
|
||||
*
|
||||
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
|
||||
* the first X-carriage and extruder, to print 2 copies of the same object at the same time.
|
||||
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
* follow with M605 S2 to initiate duplicated movement.
|
||||
*
|
||||
*
|
||||
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
|
||||
* the movement of the first except the second extruder is reversed in the X axis.
|
||||
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
|
@ -404,20 +404,20 @@
|
||||
* The inactive carriage is parked automatically to prevent oozing.
|
||||
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
|
||||
* By default the X2 stepper is assigned to the first unused E plug on the board.
|
||||
*
|
||||
*
|
||||
* The following Dual X Carriage modes can be selected with M605 S<mode>:
|
||||
*
|
||||
*
|
||||
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
|
||||
* results as long as it supports dual X-carriages. (M605 S0)
|
||||
*
|
||||
*
|
||||
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
|
||||
* that additional slicer support is not required. (M605 S1)
|
||||
*
|
||||
*
|
||||
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
|
||||
* the first X-carriage and extruder, to print 2 copies of the same object at the same time.
|
||||
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
* follow with M605 S2 to initiate duplicated movement.
|
||||
*
|
||||
*
|
||||
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
|
||||
* the movement of the first except the second extruder is reversed in the X axis.
|
||||
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
|
@ -404,20 +404,20 @@
|
||||
* The inactive carriage is parked automatically to prevent oozing.
|
||||
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
|
||||
* By default the X2 stepper is assigned to the first unused E plug on the board.
|
||||
*
|
||||
*
|
||||
* The following Dual X Carriage modes can be selected with M605 S<mode>:
|
||||
*
|
||||
*
|
||||
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
|
||||
* results as long as it supports dual X-carriages. (M605 S0)
|
||||
*
|
||||
*
|
||||
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
|
||||
* that additional slicer support is not required. (M605 S1)
|
||||
*
|
||||
*
|
||||
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
|
||||
* the first X-carriage and extruder, to print 2 copies of the same object at the same time.
|
||||
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
* follow with M605 S2 to initiate duplicated movement.
|
||||
*
|
||||
*
|
||||
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
|
||||
* the movement of the first except the second extruder is reversed in the X axis.
|
||||
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
|
@ -404,20 +404,20 @@
|
||||
* The inactive carriage is parked automatically to prevent oozing.
|
||||
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
|
||||
* By default the X2 stepper is assigned to the first unused E plug on the board.
|
||||
*
|
||||
*
|
||||
* The following Dual X Carriage modes can be selected with M605 S<mode>:
|
||||
*
|
||||
*
|
||||
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
|
||||
* results as long as it supports dual X-carriages. (M605 S0)
|
||||
*
|
||||
*
|
||||
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
|
||||
* that additional slicer support is not required. (M605 S1)
|
||||
*
|
||||
*
|
||||
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
|
||||
* the first X-carriage and extruder, to print 2 copies of the same object at the same time.
|
||||
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
* follow with M605 S2 to initiate duplicated movement.
|
||||
*
|
||||
*
|
||||
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
|
||||
* the movement of the first except the second extruder is reversed in the X axis.
|
||||
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
|
@ -404,20 +404,20 @@
|
||||
* The inactive carriage is parked automatically to prevent oozing.
|
||||
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
|
||||
* By default the X2 stepper is assigned to the first unused E plug on the board.
|
||||
*
|
||||
*
|
||||
* The following Dual X Carriage modes can be selected with M605 S<mode>:
|
||||
*
|
||||
*
|
||||
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
|
||||
* results as long as it supports dual X-carriages. (M605 S0)
|
||||
*
|
||||
*
|
||||
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
|
||||
* that additional slicer support is not required. (M605 S1)
|
||||
*
|
||||
*
|
||||
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
|
||||
* the first X-carriage and extruder, to print 2 copies of the same object at the same time.
|
||||
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
* follow with M605 S2 to initiate duplicated movement.
|
||||
*
|
||||
*
|
||||
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
|
||||
* the movement of the first except the second extruder is reversed in the X axis.
|
||||
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
|
@ -404,20 +404,20 @@
|
||||
* The inactive carriage is parked automatically to prevent oozing.
|
||||
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
|
||||
* By default the X2 stepper is assigned to the first unused E plug on the board.
|
||||
*
|
||||
*
|
||||
* The following Dual X Carriage modes can be selected with M605 S<mode>:
|
||||
*
|
||||
*
|
||||
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
|
||||
* results as long as it supports dual X-carriages. (M605 S0)
|
||||
*
|
||||
*
|
||||
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
|
||||
* that additional slicer support is not required. (M605 S1)
|
||||
*
|
||||
*
|
||||
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
|
||||
* the first X-carriage and extruder, to print 2 copies of the same object at the same time.
|
||||
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
* follow with M605 S2 to initiate duplicated movement.
|
||||
*
|
||||
*
|
||||
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
|
||||
* the movement of the first except the second extruder is reversed in the X axis.
|
||||
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
|
@ -404,20 +404,20 @@
|
||||
* The inactive carriage is parked automatically to prevent oozing.
|
||||
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
|
||||
* By default the X2 stepper is assigned to the first unused E plug on the board.
|
||||
*
|
||||
*
|
||||
* The following Dual X Carriage modes can be selected with M605 S<mode>:
|
||||
*
|
||||
*
|
||||
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
|
||||
* results as long as it supports dual X-carriages. (M605 S0)
|
||||
*
|
||||
*
|
||||
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
|
||||
* that additional slicer support is not required. (M605 S1)
|
||||
*
|
||||
*
|
||||
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
|
||||
* the first X-carriage and extruder, to print 2 copies of the same object at the same time.
|
||||
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
* follow with M605 S2 to initiate duplicated movement.
|
||||
*
|
||||
*
|
||||
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
|
||||
* the movement of the first except the second extruder is reversed in the X axis.
|
||||
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
|
@ -404,20 +404,20 @@
|
||||
* The inactive carriage is parked automatically to prevent oozing.
|
||||
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
|
||||
* By default the X2 stepper is assigned to the first unused E plug on the board.
|
||||
*
|
||||
*
|
||||
* The following Dual X Carriage modes can be selected with M605 S<mode>:
|
||||
*
|
||||
*
|
||||
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
|
||||
* results as long as it supports dual X-carriages. (M605 S0)
|
||||
*
|
||||
*
|
||||
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
|
||||
* that additional slicer support is not required. (M605 S1)
|
||||
*
|
||||
*
|
||||
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
|
||||
* the first X-carriage and extruder, to print 2 copies of the same object at the same time.
|
||||
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
* follow with M605 S2 to initiate duplicated movement.
|
||||
*
|
||||
*
|
||||
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
|
||||
* the movement of the first except the second extruder is reversed in the X axis.
|
||||
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
|
@ -404,20 +404,20 @@
|
||||
* The inactive carriage is parked automatically to prevent oozing.
|
||||
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
|
||||
* By default the X2 stepper is assigned to the first unused E plug on the board.
|
||||
*
|
||||
*
|
||||
* The following Dual X Carriage modes can be selected with M605 S<mode>:
|
||||
*
|
||||
*
|
||||
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
|
||||
* results as long as it supports dual X-carriages. (M605 S0)
|
||||
*
|
||||
*
|
||||
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
|
||||
* that additional slicer support is not required. (M605 S1)
|
||||
*
|
||||
*
|
||||
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
|
||||
* the first X-carriage and extruder, to print 2 copies of the same object at the same time.
|
||||
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
* follow with M605 S2 to initiate duplicated movement.
|
||||
*
|
||||
*
|
||||
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
|
||||
* the movement of the first except the second extruder is reversed in the X axis.
|
||||
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
|
@ -404,20 +404,20 @@
|
||||
* The inactive carriage is parked automatically to prevent oozing.
|
||||
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
|
||||
* By default the X2 stepper is assigned to the first unused E plug on the board.
|
||||
*
|
||||
*
|
||||
* The following Dual X Carriage modes can be selected with M605 S<mode>:
|
||||
*
|
||||
*
|
||||
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
|
||||
* results as long as it supports dual X-carriages. (M605 S0)
|
||||
*
|
||||
*
|
||||
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
|
||||
* that additional slicer support is not required. (M605 S1)
|
||||
*
|
||||
*
|
||||
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
|
||||
* the first X-carriage and extruder, to print 2 copies of the same object at the same time.
|
||||
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
* follow with M605 S2 to initiate duplicated movement.
|
||||
*
|
||||
*
|
||||
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
|
||||
* the movement of the first except the second extruder is reversed in the X axis.
|
||||
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and
|
||||
|
Loading…
Reference in New Issue
Block a user