Creality 4.2.10 board (#20647)

This commit is contained in:
Scott Lahteine 2021-01-03 07:16:50 -06:00
parent 3f8a83b285
commit d5465f1ad8
3 changed files with 218 additions and 7 deletions

View File

@ -330,13 +330,14 @@
#define BOARD_CHITU3D_V6 4037 // Chitu3D TronXY X5SA V5 Board #define BOARD_CHITU3D_V6 4037 // Chitu3D TronXY X5SA V5 Board
#define BOARD_CREALITY_V4 4038 // Creality v4.x (STM32F103RE) #define BOARD_CREALITY_V4 4038 // Creality v4.x (STM32F103RE)
#define BOARD_CREALITY_V427 4039 // Creality v4.2.7 (STM32F103RE) #define BOARD_CREALITY_V427 4039 // Creality v4.2.7 (STM32F103RE)
#define BOARD_CREALITY_V431 4040 // Creality v4.3.1 (STM32F103RE) #define BOARD_CREALITY_V4210 4040 // Creality v4.2.10 (STM32F103RE) as found in the CR-30
#define BOARD_CREALITY_V452 4041 // Creality v4.5.2 (STM32F103RE) #define BOARD_CREALITY_V431 4041 // Creality v4.3.1 (STM32F103RE)
#define BOARD_CREALITY_V453 4042 // Creality v4.5.3 (STM32F103RE) #define BOARD_CREALITY_V452 4042 // Creality v4.5.2 (STM32F103RE)
#define BOARD_TRIGORILLA_PRO 4043 // Trigorilla Pro (STM32F103ZET6) #define BOARD_CREALITY_V453 4043 // Creality v4.5.3 (STM32F103RE)
#define BOARD_FLY_MINI 4044 // FLY MINI (STM32F103RCT6) #define BOARD_TRIGORILLA_PRO 4044 // Trigorilla Pro (STM32F103ZET6)
#define BOARD_FLSUN_HISPEED 4045 // FLSUN HiSpeedV1 (STM32F103VET6) #define BOARD_FLY_MINI 4045 // FLY MINI (STM32F103RCT6)
#define BOARD_BEAST 4046 // STM32F103RET6 Libmaple-based controller #define BOARD_FLSUN_HISPEED 4046 // FLSUN HiSpeedV1 (STM32F103VET6)
#define BOARD_BEAST 4047 // STM32F103RET6 Libmaple-based controller
// //
// ARM Cortex-M4F // ARM Cortex-M4F

View File

@ -530,6 +530,8 @@
#include "stm32f1/pins_CHITU3D_V6.h" // STM32F1 env:chitu_f103 #include "stm32f1/pins_CHITU3D_V6.h" // STM32F1 env:chitu_f103
#elif MB(CREALITY_V4) #elif MB(CREALITY_V4)
#include "stm32f1/pins_CREALITY_V4.h" // STM32F1 env:STM32F103RET6_creality #include "stm32f1/pins_CREALITY_V4.h" // STM32F1 env:STM32F103RET6_creality
#elif MB(CREALITY_V4210)
#include "stm32f1/pins_CREALITY_V4210.h" // STM32F1 env:STM32F103RET6_creality
#elif MB(CREALITY_V427) #elif MB(CREALITY_V427)
#include "stm32f1/pins_CREALITY_V427.h" // STM32F1 env:STM32F103RET6_creality #include "stm32f1/pins_CREALITY_V427.h" // STM32F1 env:STM32F103RET6_creality
#elif MB(CREALITY_V431) #elif MB(CREALITY_V431)

View File

@ -0,0 +1,208 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
/**
* CREALITY 4.2.10 (STM32F103) board pin assignments
*/
#if NOT_TARGET(__STM32F1__)
#error "Oops! Select an STM32F1 board in 'Tools > Board.'"
#elif HOTENDS > 1 || E_STEPPERS > 1
#error "CREALITY supports up to 1 hotends / E-steppers. Comment out this line to continue."
#endif
#ifndef BOARD_INFO_NAME
#define BOARD_INFO_NAME "Creality V4.2.10"
#endif
#ifndef DEFAULT_MACHINE_NAME
#define DEFAULT_MACHINE_NAME "3DPrintMill"
#endif
#define BOARD_NO_NATIVE_USB
//
// EEPROM
//
#if NO_EEPROM_SELECTED
// FLASH
//#define FLASH_EEPROM_EMULATION
// I2C
#define IIC_BL24CXX_EEPROM // EEPROM on I2C-0 used only for display settings
#if ENABLED(IIC_BL24CXX_EEPROM)
#define IIC_EEPROM_SDA PA11
#define IIC_EEPROM_SCL PA12
#define MARLIN_EEPROM_SIZE 0x800 // 2Kb (24C16)
#else
#define SDCARD_EEPROM_EMULATION // SD EEPROM until all EEPROM is BL24CXX
#define MARLIN_EEPROM_SIZE 0x800 // 2Kb
#endif
// SPI
//#define SPI_EEPROM // EEPROM on SPI-0
//#define SPI_CHAN_EEPROM1 ?
//#define SPI_EEPROM1_CS ?
// 2K EEPROM
//#define SPI_EEPROM2_CS ?
// 32Mb FLASH
//#define SPI_FLASH_CS ?
#endif
//
// Servos
//
#define SERVO0_PIN PB0 // BLTouch OUT
//
// Limit Switches
//
#define X_STOP_PIN PA3
#define Y_STOP_PIN PA7
#define Z_STOP_PIN PA5
#define Z_MIN_PROBE_PIN PA5 // BLTouch IN
//
// Filament Runout Sensor
//
#ifndef FIL_RUNOUT_PIN
#define FIL_RUNOUT_PIN PA6 // "Pulled-high"
#endif
//
// Steppers
//
#define X_ENABLE_PIN PC3
#ifndef X_STEP_PIN
#define X_STEP_PIN PC2
#endif
#ifndef X_DIR_PIN
#define X_DIR_PIN PB9
#endif
#define Y_ENABLE_PIN PC3
#ifndef Y_STEP_PIN
#define Y_STEP_PIN PB8
#endif
#ifndef Y_DIR_PIN
#define Y_DIR_PIN PB7
#endif
#define Z_ENABLE_PIN PC3
#ifndef Z_STEP_PIN
#define Z_STEP_PIN PB6
#endif
#ifndef Z_DIR_PIN
#define Z_DIR_PIN PB5
#endif
#define E0_ENABLE_PIN PC3
#ifndef E0_STEP_PIN
#define E0_STEP_PIN PB4
#endif
#ifndef E0_DIR_PIN
#define E0_DIR_PIN PB3
#endif
//
// Release PB4 (Y_ENABLE_PIN) from JTAG NRST role
//
#define DISABLE_DEBUG
//
// Temperature Sensors
//
#define TEMP_0_PIN PC5 // TH1
#define TEMP_BED_PIN PC4 // TB1
//
// Heaters / Fans
//
#define HEATER_0_PIN PA0 // HEATER1
#define HEATER_BED_PIN PA1 // HOT BED
#define FAN_PIN PA2 // FAN
#define FAN_SOFT_PWM
//
// SD Card
//
#define SD_DETECT_PIN PC7
#define SDCARD_CONNECTION ONBOARD
#define ONBOARD_SPI_DEVICE 1
#define ONBOARD_SD_CS_PIN PA4 // SDSS
#define SDIO_SUPPORT
#define NO_SD_HOST_DRIVE // This board's SD is only seen by the printer
#if ENABLED(CR10_STOCKDISPLAY) && NONE(RET6_12864_LCD, VET6_12864_LCD)
#error "Define RET6_12864_LCD or VET6_12864_LCD to select pins for CR10_STOCKDISPLAY with the Creality V4 controller."
#endif
#if ENABLED(RET6_12864_LCD)
// RET6 12864 LCD
#define LCD_PINS_RS PB12
#define LCD_PINS_ENABLE PB15
#define LCD_PINS_D4 PB13
#define BTN_ENC PB2
#define BTN_EN1 PB10
#define BTN_EN2 PB14
#define BEEPER_PIN PC6
#elif ENABLED(VET6_12864_LCD)
// VET6 12864 LCD
#define LCD_PINS_RS PA4
#define LCD_PINS_ENABLE PA7
#define LCD_PINS_D4 PA5
#define BTN_ENC PC5
#define BTN_EN1 PB10
#define BTN_EN2 PA6
#elif ENABLED(DWIN_CREALITY_LCD)
// RET6 DWIN ENCODER LCD
#define BTN_ENC PB14
#define BTN_EN1 PB15
#define BTN_EN2 PB12
//#define LCD_LED_PIN PB2
#ifndef BEEPER_PIN
#define BEEPER_PIN PB13
#undef SPEAKER
#endif
#elif ENABLED(DWIN_VET6_CREALITY_LCD)
// VET6 DWIN ENCODER LCD
#define BTN_ENC PA6
#define BTN_EN1 PA7
#define BTN_EN2 PA4
#define BEEPER_PIN PA5
#endif