Creality 4.2.10 board (#20647)
This commit is contained in:
Scott Lahteine
parent
3f8a83b285
commit
d5465f1ad8
@ -330,13 +330,14 @@
|
||||
#define BOARD_CHITU3D_V6 4037 // Chitu3D TronXY X5SA V5 Board
|
||||
#define BOARD_CREALITY_V4 4038 // Creality v4.x (STM32F103RE)
|
||||
#define BOARD_CREALITY_V427 4039 // Creality v4.2.7 (STM32F103RE)
|
||||
#define BOARD_CREALITY_V431 4040 // Creality v4.3.1 (STM32F103RE)
|
||||
#define BOARD_CREALITY_V452 4041 // Creality v4.5.2 (STM32F103RE)
|
||||
#define BOARD_CREALITY_V453 4042 // Creality v4.5.3 (STM32F103RE)
|
||||
#define BOARD_TRIGORILLA_PRO 4043 // Trigorilla Pro (STM32F103ZET6)
|
||||
#define BOARD_FLY_MINI 4044 // FLY MINI (STM32F103RCT6)
|
||||
#define BOARD_FLSUN_HISPEED 4045 // FLSUN HiSpeedV1 (STM32F103VET6)
|
||||
#define BOARD_BEAST 4046 // STM32F103RET6 Libmaple-based controller
|
||||
#define BOARD_CREALITY_V4210 4040 // Creality v4.2.10 (STM32F103RE) as found in the CR-30
|
||||
#define BOARD_CREALITY_V431 4041 // Creality v4.3.1 (STM32F103RE)
|
||||
#define BOARD_CREALITY_V452 4042 // Creality v4.5.2 (STM32F103RE)
|
||||
#define BOARD_CREALITY_V453 4043 // Creality v4.5.3 (STM32F103RE)
|
||||
#define BOARD_TRIGORILLA_PRO 4044 // Trigorilla Pro (STM32F103ZET6)
|
||||
#define BOARD_FLY_MINI 4045 // FLY MINI (STM32F103RCT6)
|
||||
#define BOARD_FLSUN_HISPEED 4046 // FLSUN HiSpeedV1 (STM32F103VET6)
|
||||
#define BOARD_BEAST 4047 // STM32F103RET6 Libmaple-based controller
|
||||
|
||||
//
|
||||
// ARM Cortex-M4F
|
||||
|
||||
@ -530,6 +530,8 @@
|
||||
#include "stm32f1/pins_CHITU3D_V6.h" // STM32F1 env:chitu_f103
|
||||
#elif MB(CREALITY_V4)
|
||||
#include "stm32f1/pins_CREALITY_V4.h" // STM32F1 env:STM32F103RET6_creality
|
||||
#elif MB(CREALITY_V4210)
|
||||
#include "stm32f1/pins_CREALITY_V4210.h" // STM32F1 env:STM32F103RET6_creality
|
||||
#elif MB(CREALITY_V427)
|
||||
#include "stm32f1/pins_CREALITY_V427.h" // STM32F1 env:STM32F103RET6_creality
|
||||
#elif MB(CREALITY_V431)
|
||||
|
||||
208
Marlin/src/pins/stm32f1/pins_CREALITY_V4210.h
Normal file
208
Marlin/src/pins/stm32f1/pins_CREALITY_V4210.h
Normal file
@ -0,0 +1,208 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
|
||||
/**
|
||||
* CREALITY 4.2.10 (STM32F103) board pin assignments
|
||||
*/
|
||||
|
||||
#if NOT_TARGET(__STM32F1__)
|
||||
#error "Oops! Select an STM32F1 board in 'Tools > Board.'"
|
||||
#elif HOTENDS > 1 || E_STEPPERS > 1
|
||||
#error "CREALITY supports up to 1 hotends / E-steppers. Comment out this line to continue."
|
||||
#endif
|
||||
|
||||
#ifndef BOARD_INFO_NAME
|
||||
#define BOARD_INFO_NAME "Creality V4.2.10"
|
||||
#endif
|
||||
#ifndef DEFAULT_MACHINE_NAME
|
||||
#define DEFAULT_MACHINE_NAME "3DPrintMill"
|
||||
#endif
|
||||
|
||||
#define BOARD_NO_NATIVE_USB
|
||||
|
||||
//
|
||||
// EEPROM
|
||||
//
|
||||
#if NO_EEPROM_SELECTED
|
||||
// FLASH
|
||||
//#define FLASH_EEPROM_EMULATION
|
||||
|
||||
// I2C
|
||||
#define IIC_BL24CXX_EEPROM // EEPROM on I2C-0 used only for display settings
|
||||
#if ENABLED(IIC_BL24CXX_EEPROM)
|
||||
#define IIC_EEPROM_SDA PA11
|
||||
#define IIC_EEPROM_SCL PA12
|
||||
#define MARLIN_EEPROM_SIZE 0x800 // 2Kb (24C16)
|
||||
#else
|
||||
#define SDCARD_EEPROM_EMULATION // SD EEPROM until all EEPROM is BL24CXX
|
||||
#define MARLIN_EEPROM_SIZE 0x800 // 2Kb
|
||||
#endif
|
||||
|
||||
// SPI
|
||||
//#define SPI_EEPROM // EEPROM on SPI-0
|
||||
//#define SPI_CHAN_EEPROM1 ?
|
||||
//#define SPI_EEPROM1_CS ?
|
||||
|
||||
// 2K EEPROM
|
||||
//#define SPI_EEPROM2_CS ?
|
||||
|
||||
// 32Mb FLASH
|
||||
//#define SPI_FLASH_CS ?
|
||||
#endif
|
||||
|
||||
//
|
||||
// Servos
|
||||
//
|
||||
#define SERVO0_PIN PB0 // BLTouch OUT
|
||||
|
||||
//
|
||||
// Limit Switches
|
||||
//
|
||||
#define X_STOP_PIN PA3
|
||||
#define Y_STOP_PIN PA7
|
||||
#define Z_STOP_PIN PA5
|
||||
|
||||
#define Z_MIN_PROBE_PIN PA5 // BLTouch IN
|
||||
|
||||
//
|
||||
// Filament Runout Sensor
|
||||
//
|
||||
#ifndef FIL_RUNOUT_PIN
|
||||
#define FIL_RUNOUT_PIN PA6 // "Pulled-high"
|
||||
#endif
|
||||
|
||||
//
|
||||
// Steppers
|
||||
//
|
||||
#define X_ENABLE_PIN PC3
|
||||
#ifndef X_STEP_PIN
|
||||
#define X_STEP_PIN PC2
|
||||
#endif
|
||||
#ifndef X_DIR_PIN
|
||||
#define X_DIR_PIN PB9
|
||||
#endif
|
||||
|
||||
#define Y_ENABLE_PIN PC3
|
||||
#ifndef Y_STEP_PIN
|
||||
#define Y_STEP_PIN PB8
|
||||
#endif
|
||||
#ifndef Y_DIR_PIN
|
||||
#define Y_DIR_PIN PB7
|
||||
#endif
|
||||
|
||||
#define Z_ENABLE_PIN PC3
|
||||
#ifndef Z_STEP_PIN
|
||||
#define Z_STEP_PIN PB6
|
||||
#endif
|
||||
#ifndef Z_DIR_PIN
|
||||
#define Z_DIR_PIN PB5
|
||||
#endif
|
||||
|
||||
#define E0_ENABLE_PIN PC3
|
||||
#ifndef E0_STEP_PIN
|
||||
#define E0_STEP_PIN PB4
|
||||
#endif
|
||||
#ifndef E0_DIR_PIN
|
||||
#define E0_DIR_PIN PB3
|
||||
#endif
|
||||
|
||||
//
|
||||
// Release PB4 (Y_ENABLE_PIN) from JTAG NRST role
|
||||
//
|
||||
#define DISABLE_DEBUG
|
||||
|
||||
//
|
||||
// Temperature Sensors
|
||||
//
|
||||
#define TEMP_0_PIN PC5 // TH1
|
||||
#define TEMP_BED_PIN PC4 // TB1
|
||||
|
||||
//
|
||||
// Heaters / Fans
|
||||
//
|
||||
#define HEATER_0_PIN PA0 // HEATER1
|
||||
#define HEATER_BED_PIN PA1 // HOT BED
|
||||
|
||||
#define FAN_PIN PA2 // FAN
|
||||
#define FAN_SOFT_PWM
|
||||
|
||||
//
|
||||
// SD Card
|
||||
//
|
||||
#define SD_DETECT_PIN PC7
|
||||
#define SDCARD_CONNECTION ONBOARD
|
||||
#define ONBOARD_SPI_DEVICE 1
|
||||
#define ONBOARD_SD_CS_PIN PA4 // SDSS
|
||||
#define SDIO_SUPPORT
|
||||
#define NO_SD_HOST_DRIVE // This board's SD is only seen by the printer
|
||||
|
||||
#if ENABLED(CR10_STOCKDISPLAY) && NONE(RET6_12864_LCD, VET6_12864_LCD)
|
||||
#error "Define RET6_12864_LCD or VET6_12864_LCD to select pins for CR10_STOCKDISPLAY with the Creality V4 controller."
|
||||
#endif
|
||||
|
||||
#if ENABLED(RET6_12864_LCD)
|
||||
|
||||
// RET6 12864 LCD
|
||||
#define LCD_PINS_RS PB12
|
||||
#define LCD_PINS_ENABLE PB15
|
||||
#define LCD_PINS_D4 PB13
|
||||
|
||||
#define BTN_ENC PB2
|
||||
#define BTN_EN1 PB10
|
||||
#define BTN_EN2 PB14
|
||||
|
||||
#define BEEPER_PIN PC6
|
||||
|
||||
#elif ENABLED(VET6_12864_LCD)
|
||||
|
||||
// VET6 12864 LCD
|
||||
#define LCD_PINS_RS PA4
|
||||
#define LCD_PINS_ENABLE PA7
|
||||
#define LCD_PINS_D4 PA5
|
||||
|
||||
#define BTN_ENC PC5
|
||||
#define BTN_EN1 PB10
|
||||
#define BTN_EN2 PA6
|
||||
|
||||
#elif ENABLED(DWIN_CREALITY_LCD)
|
||||
|
||||
// RET6 DWIN ENCODER LCD
|
||||
#define BTN_ENC PB14
|
||||
#define BTN_EN1 PB15
|
||||
#define BTN_EN2 PB12
|
||||
|
||||
//#define LCD_LED_PIN PB2
|
||||
#ifndef BEEPER_PIN
|
||||
#define BEEPER_PIN PB13
|
||||
#undef SPEAKER
|
||||
#endif
|
||||
|
||||
#elif ENABLED(DWIN_VET6_CREALITY_LCD)
|
||||
|
||||
// VET6 DWIN ENCODER LCD
|
||||
#define BTN_ENC PA6
|
||||
#define BTN_EN1 PA7
|
||||
#define BTN_EN2 PA4
|
||||
|
||||
#define BEEPER_PIN PA5
|
||||
|
||||
#endif
|
||||
Loading…
Reference in New Issue
Block a user