Fix ExtUI + Archim compile, typos (#17825)

Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/config.h

@@ -23,102 +23,4 @@
 
 #include "compat.h"
 
-// Define the display board used (see "ftdi_eve_boards.h" for definitions)
+// Configure this display with options in Configuration_adv.h
-
-//#define LCD_FTDI_VM800B35A        // FTDI 3.5" 320x240 with FT800
-//#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" 480x272
-//#define LCD_HAOYU_FT800CB         // Haoyu with 4.3" or 5" 480x272
-//#define LCD_HAOYU_FT810CB         // Haoyu with 5" 800x480
-//#define LCD_ALEPHOBJECTS_CLCD_UI  // Aleph Objects Color LCD User Interface
-
-// Leave the following commented out to use a board's default resolution.
-// If you have changed the LCD panel, you may override the resolution
-// below (see "ftdi_eve_resolutions.h" for definitions):
-
-//#define TOUCH_UI_320x240
-//#define TOUCH_UI_480x272
-//#define TOUCH_UI_800x480
-
-// Define the printer interface or pins used (see "ui_pin_mappings.h" for definitions):
-
-//#define CR10_TFT_PINMAP
-//#define AO_EXP1_DEPRECATED_PINMAP  // UltraLCD EXP1 connector, old AlephObject's wiring
-//#define AO_EXP1_PINMAP  // UltraLCD EXP1 connector, new AlephObject's wiring
-//#define AO_EXP2_PINMAP  // UltraLCD EXP2 connector, new AlephObject's wiring
-//#define OTHER_PIN_LAYOUT
-
-// Otherwise. Define all the pins manually:
-
-#ifdef OTHER_PIN_LAYOUT
-    // Select interfacing pins, the following pin specifiers are supported:
-    //
-    //     ARDUINO_DIGITAL_1  - Arduino pin via digitalWrite/digitalRead
-    //     AVR_A1             - Fast AVR port access via PORTA/PINA/DDRA
-    //     1                  - When compiling Marlin, use Marlin pin IDs.
-
-    // The pins for CS and MOD_RESET (PD) must be chosen.
-    #define CLCD_MOD_RESET                      9
-    #define CLCD_SPI_CS                        10
-
-    // If using software SPI, specify pins for SCLK, MOSI, MISO
-    //#define CLCD_USE_SOFT_SPI
-    #ifdef CLCD_USE_SOFT_SPI
-        #define CLCD_SOFT_SPI_MOSI             11
-        #define CLCD_SOFT_SPI_MISO             12
-        #define CLCD_SOFT_SPI_SCLK             13
-    #endif
-#endif
-
-// Defines how to orient the display. An inverted (i.e. upside-down) display
-// is supported on the FT800. The FT810 or better also support a portrait
-// and mirrored orientation.
-//#define TOUCH_UI_INVERTED
-//#define TOUCH_UI_PORTRAIT
-//#define TOUCH_UI_MIRRORED
-
-// Enable UTF8 processing and rendering. Unsupported characters
-// will be shown as '?'.
-//#define TOUCH_UI_USE_UTF8
-#ifdef TOUCH_UI_USE_UTF8
-  // Western accents support. These accented characters use
-  // combined bitmaps and require relatively little storage.
-  #define TOUCH_UI_UTF8_WESTERN_CHARSET
-  #ifdef TOUCH_UI_UTF8_WESTERN_CHARSET
-    // Additional character groups. These characters require
-    // full bitmaps and take up considerable storage:
-    //#define TOUCH_UI_UTF8_SUPERSCRIPTS    // ¹ ² ³
-    //#define TOUCH_UI_UTF8_COPYRIGHT       // © ®
-    //#define TOUCH_UI_UTF8_GERMANIC        // ß
-    //#define TOUCH_UI_UTF8_SCANDINAVIAN    // Æ Ð Ø Þ æ ð ø þ
-    //#define TOUCH_UI_UTF8_PUNCTUATION     // « » ¿ ¡
-    //#define TOUCH_UI_UTF8_CURRENCY        // ¢ £ ¤ ¥
-    //#define TOUCH_UI_UTF8_ORDINALS        // º ª
-    //#define TOUCH_UI_UTF8_MATHEMATICS     // ± × ÷
-    //#define TOUCH_UI_UTF8_FRACTIONS       // ¼ ½ ¾
-    //#define TOUCH_UI_UTF8_SYMBOLS         // µ ¶ ¦ § ¬
-  #endif
-#endif
-
-// When labels do not fit buttons, use smaller font
-//#define TOUCH_UI_FIT_TEXT
-
-// Enable support for selection of languages at run-time
-// (otherwise will use the value of LCD_LANGUAGE)
-//#define TOUCH_UI_LANGUAGE_MENU
-
-// Use a numeric passcode for "Parental lock".
-// This is a recommended for smaller displays.
-//#define TOUCH_UI_PASSCODE
-
-// The timeout (in ms) to return to the status screen from sub-menus
-//#define LCD_TIMEOUT_TO_STATUS 15000
-
-// Enable this to debug the event framework
-//#define TOUCH_UI_DEBUG
-
-// Enable the developer's menu and screens
-//#define DEVELOPER_SCREENS
-
-// Sets the SPI speed in Hz
-
-#define SPI_FREQUENCY 8000000 >> SPI_SPEED

Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/spi.cpp

@@ -29,7 +29,7 @@
 namespace FTDI {
 
   #ifndef CLCD_USE_SOFT_SPI
-    #ifndef __AVR__
+    #ifdef CLCD_SPI_BUS
       SPIClass EVE_SPI(CLCD_SPI_BUS);
     #endif
     SPISettings SPI::spi_settings(SPI_FREQUENCY, MSBFIRST, SPI_MODE0);

Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/spi.h

@@ -28,7 +28,7 @@
 
 namespace FTDI {
 
-  #if defined(__AVR__) || defined(CLCD_USE_SOFT_SPI)
+  #if !defined(CLCD_SPI_BUS) || defined(CLCD_USE_SOFT_SPI)
     #define SPI_OBJ ::SPI
   #else
     extern SPIClass EVE_SPI;

Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/advanced_settings_menu.cpp

@@ -99,9 +99,8 @@ void AdvancedSettingsMenu::onRedraw(draw_mode_t what) {
       .enabled(ENABLED(SENSORLESS_HOMING))
       .tag(14).button( TMC_HOMING_THRS_POS,    GET_TEXT_F(MSG_TMC_HOMING_THRS))
       .enabled(EITHER(HAS_MULTI_HOTEND, BLTOUCH))
-      .tag(4) .button( OFFSETS_POS,            GET_TEXT_F(TERN(HAS_MULTI_HOTEND, MSG_OFFSETS_MENU, MSG_RESET_BLTOUCH))
+      .tag(4) .button( OFFSETS_POS,            GET_TEXT_F(TERN(HAS_MULTI_HOTEND, MSG_OFFSETS_MENU, MSG_RESET_BLTOUCH)))
-      .enabled(EITHER(LIN_ADVANCE, FILAMENT_RUNOUT_SENSOR)
+      .enabled(EITHER(LIN_ADVANCE, FILAMENT_RUNOUT_SENSOR))
-      )
       .tag(11).button( FILAMENT_POS,           GET_TEXT_F(MSG_FILAMENT))
       .tag(12).button( ENDSTOPS_POS,           GET_TEXT_F(MSG_LCD_ENDSTOPS))
       .tag(15).button( DISPLAY_POS,            GET_TEXT_F(MSG_DISPLAY_MENU))
@@ -109,7 +108,7 @@ void AdvancedSettingsMenu::onRedraw(draw_mode_t what) {
       .tag(10).button( RESTORE_DEFAULTS_POS,   GET_TEXT_F(MSG_RESTORE_DEFAULTS))
       .tag(5) .button( VELOCITY_POS,           GET_TEXT_F(MSG_VELOCITY))
       .tag(6) .button( ACCELERATION_POS,       GET_TEXT_F(MSG_ACCELERATION))
-      .tag(7) .button( JERK_POS,               GET_TEXT_F(TERN(HAS_JUNCTION_DEVIATION, MSG_JUNCTION_DEVIATION, MSG_JERK))
+      .tag(7) .button( JERK_POS,               GET_TEXT_F(TERN(HAS_JUNCTION_DEVIATION, MSG_JUNCTION_DEVIATION, MSG_JERK)))
       .enabled(ENABLED(BACKLASH_GCODE))
       .tag(8).button( BACKLASH_POS,            GET_TEXT_F(MSG_BACKLASH))
       .colors(action_btn)

Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/tune_menu.cpp

@@ -72,7 +72,7 @@ void TuneMenu::onRedraw(draw_mode_t what) {
        .enabled(EITHER(LIN_ADVANCE, FILAMENT_RUNOUT_SENSOR))
        .tag(9).button( FILAMENT_POS, GET_TEXT_F(MSG_FILAMENT))
        .enabled(EITHER(HAS_BED_PROBE, BABYSTEPPING))
-       .tag(4).button( NUDGE_NOZ_POS, GET_TEXT_F(TERN(BABYSTEPPING, MSG_NUDGE_NOZZLE, MSG_ZPROBE_ZOFFSET))
+       .tag(4).button( NUDGE_NOZ_POS, GET_TEXT_F(TERN(BABYSTEPPING, MSG_NUDGE_NOZZLE, MSG_ZPROBE_ZOFFSET)))
        .tag(5).button( SPEED_POS, GET_TEXT_F(MSG_PRINT_SPEED))
        .tag(isPrintingFromMediaPaused() ? 7 : 6)
        .enabled(TERN0(SDSUPPORT, isPrintingFromMedia()))

Marlin/src/lcd/extui_dgus_lcd.cpp

@@ -106,6 +106,7 @@ namespace ExtUI {
     // whether successful or not.
   }
 
+  #if HAS_MESH
     void onMeshUpdate(const int8_t xpos, const int8_t ypos, const float zval) {
       // Called when any mesh points are updated
     }
@@ -113,6 +114,7 @@ namespace ExtUI {
     void onMeshUpdate(const int8_t xpos, const int8_t ypos, const ExtUI::probe_state_t state) {
       // Called to indicate a special condition
     }
+  #endif
 
   #if ENABLED(POWER_LOSS_RECOVERY)
     void onPowerLossResume() {